cvtariq

5
CURRICULUM VITAE MOHAMMAD TARIQ E-Mail:[email protected] Mob. No. 09537794050 Objective: To be a part of successful support team and applying my knowledge, experience and skill in the growth of organization that will help in self-development and growth. Experience:6 Years >Presently working with‘SHAH TECHNICAL CONSULTANTS PVT LTD.’Mumbai as a -Senior Electrical &Instrumentation Engineerfrom September 2014 to till date. JobProfile: 1. Team Management. 2. Coordination with client, consultant and sub contractor. 3. Calculation of materials required on the site. 4. Installation testing and commissioning of Swichyards, SubStations. 5. Installation, testing & commissioning of Instrumentation and control systems 6. Erection of Motors, Soft Staters,Field instruments, cable laying, earthing. 7. Erection of, Pumps (Horizontal & Vertical),Piping and Motors,valves,Transmitters and gauge 7. Submit as built drawings and other documents (test report & equipment manuals). 8. Material reconciliation and billing

Transcript of cvtariq

Page 1: cvtariq

CURRICULUM VITAE

MOHAMMAD TARIQE-Mail:[email protected] Mob. No. 09537794050

Objective:

To be a part of successful support team and applying my knowledge, experience and skill in the growth of organization that will help in self-development and growth.

Experience:6 Years

>Presently working with‘SHAH TECHNICAL CONSULTANTS PVT LTD.’Mumbai as a -Senior Electrical &Instrumentation Engineerfrom September 2014 to till date.

JobProfile:

1. Team Management.2. Coordination with client, consultant and sub contractor.3. Calculation of materials required on the site.4. Installation testing and commissioning of Swichyards, SubStations.5. Installation, testing & commissioning of Instrumentation and control systems6. Erection of Motors, Soft Staters,Field instruments, cable laying, earthing.7. Erection of, Pumps (Horizontal & Vertical),Piping and Motors,valves,Transmitters and gauge7. Submit as built drawings and other documents (test report & equipment manuals).

8. Material reconciliation and billing 9. Operation and Maintenance of Electrical Swichyards,Subsataions,HT/LT Switchgears, HT/LT Motors, Soft Stators.

10 laying of ms pipe line of 3000 mm diameter as per L-section.11 Inspection of ms pipe line, valve (butterfly, sluice valve, air valve etc.)11 Inspection and erection of electrical systems of pump house as per tender specification.

Project Executed:

(I) In SHAH TECHNICAL CONSULTANTS PVT LTD

Currently working on Project Saurashtra-Narmada Avataran Irrigation Yojana Link-2, Pakage1,2&3, Project include two intermediate pumping station,3000mm dia ms pipe line of 51 km with operation and maintenance for 10 years.

Page 2: cvtariq

(II) In PANUN ENTRACON PVT LTD.(From June 2010 to August 2014)

(I) 10 MGD Clear Water Pumping station at Saraikale khan, New Delhi. (Delhi Jal Board Project)

Erection, testing & commissioning of 500 KVA Transformer, HT Panel, LT PanelHT/LTCable laying,Earthing (Plate & Pipe) and Instrumentation systems,sluie valves, butterfly valves and other control valves,Erection of field instruments etc.

(II) 120 MGD Raw Water Pumping Station at Wazirarbad ,Delhi.(Delhi Jal Board Project)

Installation, testing & commissioning of 3250 KVA,125 KVA,Transformers,11/3.3KVElectricalSubstation, Field Insturmentation,Operation of Scada based Pumping Station, Erection of Vertical Turbine Pump,HT/LT Motors,Pipelines,Control valves etc.

(III) 20 MGD WATER TREATMENT AND RAW WATER PUMPING STATION at DELH(Delhi Jal Board Project)

Installation, testing & commissioning, Operation and Maintenance of 1600KVA Transformer,125 KVA ,11KV Substation DG Set ,LT Panel,Cable laying (Power and Control) Earthing of all equipments.Erection of control valves, transmitters,HT/LT Motors, Soft Stators,Instrumentation and control panel ,Plc based scada system etc.

Job Responsibilities-

Detail Engineering:

Preparation of P&ID’s, Instrument index, Instrument datasheets, JB schedules, Cable schedules, Termination detail, Logic diagram, Loop diagram, Interlock diagram, Hook up drawings, IO’s list, Control system designing, Selection of Instruments, calculations for various instruments, enquiry specifications, technical & commercial comparison statements, Preparation of BOM. Order specifications, purchase follow-ups, inspection and checking of materials arrived at site with respect to purchase orders etc.

Procurement:

Preparation and floatation of enquiries, To study and compare offers technically, Vendor technical documents review, Technical bid evaluation and recommendation, To conduct technical meetings with vendors, To perform factory acceptance tests and inspections at supplier end, To handle post receipt technical issues.

Erection & Commissioning:

2

Page 3: cvtariq

To prepare the work order, To coordinate with contractors and project team in order to achieve daily Erection targets, To check and approve the contractors job, To perform commissioning of field instruments and control systems, To complete project within cost and time constrained environments, To handover the plant to maintenance team along with all necessary documents.

Technical Qualification:

Completed B.Tech in Electronic & Instrumentation Engg. From Priyadarshini college of computer science affiliated to U.P. Technical University,Lucknow in 2010 with 71.7%.

Computer Proficiency:

M.S.Office, InternetAUTO CAD (2D&3D)

Strength:

>Adoptability.>Honesty, time punctuality.>Always try to learn something new.

Personal Details:

Father’s name : Mr. Mohammad AyyuvDate of birth : 10-07-1987Nationality : Indian

Passport status : Ready Sex :Male

Marital Status : Married Language known : Hindi, English,

Permanent Address.: Vill& post-Manona(Aonla) Disst.-Bareilly,243301 Uttar Pradesh INDIA

Contact no. : 09537794050,09958483435

Date: (MohammadTariq) Place:

3