CV-RESUME J. C. Bernal-Detailed

18
Jimmy C. Bernal Email Add: [email protected] Philippine Mobile no: +639491167121 / +639214388076 HOME Philippine PLDT Landline no: +63437848140 Dubai Mobile : +971552121734 & +971553437096 Passport No. : EC1788219 Professional Qualifications & Personal Information Present Position : Sr. Maintenance Engineer / Asst. to Maintenance Manager Previous Position : Engineering and Maintenance Head Previous Position : Sr. Plant Electrical / Maintenance Engineer Degree/Education : Graduated of Bachelor of Science in Electrical Engineering ( ye ar 1984 – 1990 ) 5 years course Expertise : 1) Manage a Maintenance Department. 2) Familiar with Maintenance Approaches. 3) Familiar with Maintenance Indicators. 4) Manage a Team of Technicians. 5) Spare Parts Management. 6) 5S Oriented and Familiar with Implementation as member of the committee. 7) Troubleshoot and Investigate electrical equipment failure or efficiently problems. 8) Preparing/Revising Maintenance Procedures. 9) Planning and Implementing Maintenance Management. 10) International Standard Operation for Maintenance Dept.

Transcript of CV-RESUME J. C. Bernal-Detailed

Page 1: CV-RESUME J. C. Bernal-Detailed

Jimmy C. BernalEmail Add: [email protected] Mobile no: +639491167121 / +639214388076 HOME Philippine PLDT Landline no: +63437848140Dubai Mobile : +971552121734 & +971553437096Passport No. : EC1788219

Professional Qualifications & Personal Information ● Present Position : Sr. Maintenance Engineer / Asst. to Maintenance Manager ● Previous Position : Engineering and Maintenance Head ● Previous Position : Sr. Plant Electrical / Maintenance Engineer ● Degree/Education : Graduated of Bachelor of Science in Electrical Engineering

( year 1984 – 1990 ) 5 years course ● Expertise :

1) Manage a Maintenance Department.2) Familiar with Maintenance Approaches. 3) Familiar with Maintenance Indicators.4) Manage a Team of Technicians.5) Spare Parts Management.6) 5S Oriented and Familiar with Implementation as member of the committee.7) Troubleshoot and Investigate electrical equipment failure or efficiently problems.8) Preparing/Revising Maintenance Procedures.9) Planning and Implementing Maintenance Management.10) International Standard Operation for Maintenance Dept. 11) Electrical & Mechanical works troubleshooting.12) PLC & Electrical Controls. 13) Electrical Design and Construction.14) Pump and Motor’s & Motor Controls and VFD.15) Preparation & Implementation of Preventive Maintenance Plan.16) Electrical & Mechanical Safety Oriented. 17) Operation & Maintenance of Generator’s. 18) Test & Commissioning.19) Analyzing Data.20) Maintenance Staff Appraisal and Evaluation.

Page 2: CV-RESUME J. C. Bernal-Detailed

● Years of Experience : 25 years (Hands-On Solid Experience) 1) Strong Leadership & Decision Making.

2) Maintain, troubleshoot, repair and upgrading of the terminal electrical and mechanical equipment.

3) Design and Electrical construction. 4) Manage a Quality Maintenance Management System involving

maintenance procedures , planning , organizing , implementation and routine monitoring.

● Affiliations : Associate Member, Institute of Integrated Electrical Engineers - ERCSA (Saudi Arabia) , membership no: 12ERCSA-ASSO-008 Professional Regulation Commission License no. RME0013252 ( Government Licensing Agency for Professional , Philippines )

Training / Seminars Attended : √ Residential, Commercial, Industrial Electrical Design and Construction (Yr-1989) √ High Rise Building Electrical Design (Yr-1989) √ Modern Transmission, Distribution Designs & Protection Schemes (Yr-1989) √ Philippine Electrical Code (Yr-1991) √ Basic Safety Course (Yr-1998)

√ Improving the Operation & Maintenance of Boiler (Yr-1999) √ Compressor Technology (Yr-2002)

√ Pneumatic Technology (Yr-2004) √ Fire Prevention & Disaster Seminar (Yr-2004) √ Industrial Laboratory Water Analysis (Yr-2005) √ Industrial Wastewater Treatment (Yr-2007) √ Integrated Management System – Master Class (Yr-2010) √ KPC Integrated Management System (Yr-2011) √ Programming Procedures of Programmable Logic Controllers and Testing & Operating an Automatic / Manual Transfer Switch (Yr-2012) √ Programmable Logic Controller-System Integration/Variable Frequency Drive Testing and Commissioning (Yr-2012) √ Sizing of Capacitor Bank, Short Circuit Calculation, Smart Energy Solution, Lighting System & Retrofitting, Cable Tray, Bus Bar Trunk (Yr-2012)

√ Indoor Lighting Design using DIALux, Fire Alarm System, Basic Principles of High Voltage Direct Current (HVDC) Transmission & Electrical Safety for Construction

Page 3: CV-RESUME J. C. Bernal-Detailed

• Age : 48 years old ● Date of Birth : June 16, 1967

Nationality : Filipino E-Mail Address : [email protected] Special Skills : Computer literate, Driving, Auto-Cad Dubai Mobile : +971552121734 / +971553437096 Philippine Mobile : +639491167121 Home Tel (Philippines) : +63437848140

● Passport No. : EC1788219

Professional & Work Experience

Sr. Maintenance Engineer / Lootah-National Ready-Mix Concrete Company (Construction) Asst. Maintenance Manager PO Box 10631 Dubai, United Arab Emirates(Oct. ’14 – April ‘15) Certified ISO 9001 Acting Maintenance Manager(May ‘ 15 – Present)

Duties and Responsibilities: √ - Assisting the Maintenance manager in his full capacity as Maintenance Manager of 15 Batching Plants for Ready-Mix Concrete Factories in United Arab Emirates. √ - Initiates and develops maintenance strategies for all plants and equipment, and ensure effective implementation of these strategies. √ - Prepares and issues maintenance plan, policies and strategies. √ - Responsible for the managing, overseeing, supervising, and inspection / monitoring of maintenance personnel in their task of work with regards to the electromechanical construction / modification, engineering works, planned preventive maintenance, routine monitoring, & troubleshooting of machine & equipment within of all its branches in United Arab Emirates. √ - Perform related function such as prepare requisition, evaluation of quotation, engineering analysis, deal / troubleshoot problems of equipment / machine as the need arises,recommendation for improvement and training / evaluation of maintenance personnel.

Engineering and Maintenance Head Essential Fruits Incorporated (July ’14 – October ‘14) ( Fruits and Beverages Processing Plant ) KM. 82 Brgy. Malatgao, Narra , Palawan, Philippines

Duties and Responsibilities: √ - To perform full capacity as Head of Engineering and Maintenance Dept. √ - Overseeing and monitoring the work of maintenance personnel with regards to Engineering and Planned Preventive Maintenance.

Page 4: CV-RESUME J. C. Bernal-Detailed

√ - Prepare, Manage and Assign Quality Maintenance Management System involving maintenance procedure, reports, checklist, word orders, breakdown analysis, suggest modifications and revision for improvement, equipment history records and keeping all the maintenance records. √ - Perform requisition and purchasing works of needed spare parts and consumable spare with proper evaluation of the recommended spare parts by the supplier. √ - Providing training with the maintenance staff and do appraisal of their performance. √ - To deal / troubleshoot , and diagnose emergency breakdown as they occur with regards to PLC hardware / controls, mechanical / electrical problem of the machine & equipment wherein my subordinates cannot solve the problem as needed.

Sr. Plant Electrical/Maintenance Al Kifah Precast Concrete Company ( Construction )Engineer ( August ’08 – Feb ‘14 ) PO Box 30789, Akrabiya Al Khobar 31952, Saudi Arabia

Abqaiq Rd , New 2nd Industrial City , Dammam Certified ISO 9001-2008, ISO 14001-2004 & OHSAS 18001-2007

Duties and Responsibilities:

√ - Involves in electrical design & construction of the plant as “Hands-On” Electrical Engineer.

√ - Reports directly to the superior any matters regarding or concerning maintenance revision & problem matters. √ - Responsible for planning and overseeing the maintenance team activities to ensure safe and efficient operations of the facility and keeping maintenance records. √ - Work as resident plant electrical engineer with minimum supervision on a variety of complex engineering functions. √ - Lead and recommend new continuous improvement solutions for installations or modifications to improve existing facilities and standardization within specific fields of endeavor. √ - Perform engineering analysis and develop recommendations and alternatives in the solution of complex problems related to the plants electrical and control system.

√ - Work on the electrical engineering aspects and produce full design packages for the required plant modifications. √ - Prepare and plan routine maintenance schedules and reports. √ -Assign preventive and corrective maintenance jobs as per the direction of Maintenance Manager. √ - Supervises and coordinates activities of maintenance staff. √ - Make periodic inspection of equipment and system to observe operating condition in actual or thru monitoring checklist of equipment and need for repair & adjustment.

Page 5: CV-RESUME J. C. Bernal-Detailed

√ - Keep maintenance records, prepares reports and composes correspondence related to work. √ - Executes work order through Maintenance Management System and coordinates with maintenance supervisor / foremen for job completion and technical matters. √ - Maintain such communications and relations as are necessary to report on the status of matters requiring action and to ensure that corrective action is undertaken. √ - Helps Maintenance Manager in executing corrective and planned maintenance with due regard to schedule maintenance plan. √ - To perform technical evaluation of quotation received from purchased department and recommend appropriate choice. √ - Plans and controls expenditures in accordance with the operating budget of the department. √ - To prepare purchase requisitions for spare parts and consumables ensuring budgetary constraints and arrange strategic spares availability to cope up with the maintenance requirements. √ - Review and recommend new maintenance procedures and work instructions. √ - Supervise, direct and co-ordinate the activities of all personnel to his area. √ - Ensure environment aspect – impact and hazard risk assessment are carried out, controlled & updated. √ - Implement, monitor and report IMS (Integrated Management System) objectives, targets and programs. √ - Provide necessary resources for effective implementation and sustenance of IMS (Integrated Management System) and report performance to the management periodically. √ - Ensure identification of root cause for the identified non-conformances/deviations in IMS (Integrated Management System) and to implement corrective actions/preventive actions. √ - Identify the competency gap for their subordinate personnel and carry out annual performance evaluation of reporting employees. √ - Provide training to new employees and evaluate their performance.

√- To deal & diagnose emergency breakdown as they occur for equipments & machines such as :

1 ) Elematic precast concrete machineries 5 units - Steel Wire Pulling Device ( EN 875 ,) 2 units - Saw Machine ( EL 1300 ) 2 units - Extruder Machine ( EL 900E ) 1 unit - Stressing Device 2 units - Cleaning Machine ( EL 400 ) 7 units - Shuttle Concrete Machine ( EB 405 ) 2 units - Lifting Beam ( 2 X 5T ) ( EN 886/16 )

1 unit - Maturity Control System (EL 490 )5 units - Portable Concrete Shute 5.4T, 380 volt

5 units - Intermediate Hopper EB 120

2 ) Ebawe precast concrete machineries1 unit - Central Shifting Machine

Page 6: CV-RESUME J. C. Bernal-Detailed

2 units - Concrete Distributor Machine 2 units - Tilting Table

2 units – Side Shifting units 2 units – Compacting devices 3 ) Boiler – Make: Viesman, 80 HP – 1 unit, 4 ) Stressing Jack ( CCL ) – for pre-stress beam – 1 unit 5 ) Kone Overhead Crane – 20 units 6 ) 1020 KVA Cummins Generator – 4 units 7 ) 456 KVA Caterpillar Generator – 1 unit 8 ) Synchronizing Panel & Main Distribution Panels

9 ) Batching Plant 1 – one mixer ( 37 KW ) 10) Batching Plant 2 - two mixer ( 2 x 37 KW ) 11) Aggregates Washing Plant no. 1 12) Ice Batcher no. 1 & 2 13) Desalination Plant a) Sedimentation Tank – 2 tank b) Domestic Tank – 2 tank c) Sweet Water Tank – 1 tank d) R.O. Treatment – 200 cu. mtr. capacity e) Domestic Pump (2) with one jockey pump f) Fire Fighting Pump (2) g) Sweet Water Pump (2) with one jockey pump 14) Chiller Plant with 2 units compressor & one chilled Sweet water tank with 2 units pump. 15) Air Compressor Unit a) 4 units Sullar air compressor , 10 bar b) 1 unit Ingressor Rand , 10 bar c) 1 unit Atlas air compressor , 8 bar d) 3 units Champion Piston Type (big) e) 5 units Champion Piston Type (small) 16) Air Conditioning Units a) Split Type – 60 units b) Window Type – 140 units 17) Heavy Duty Miller Welding Machine , 380 ac volt, 63 amp. Max - 36 units & 2 units Heavy Duty MIG 18) Mobile Crane 3 units – Groove 70T (one) & Groove 80T (two) 3 units - Tadano 70T (two) & Tadano 80T (one) 1 unit – Liebherr 130T 19) Haulotte Manlifter , 360 degrees turn (articulation) 20) Genie Manlifter, boom type 21) Wheeloader , 1 unit – Brand: Kawasaki 22) Truck Mixer – 1 unit 23) Forklift (Toyota) – 1 unit 24) Bar Cutting Machine (3 units) & Bar Bending

Page 7: CV-RESUME J. C. Bernal-Detailed

Machine (4 units ) 25) Vibrator / Inverter Machine , 3 phase, 380 V. -3 units 26) Sheering Machine , 380 volts , 3 phase – 1 unit 27) Bending Machine , 380 volts , 3 phase – 1 unit 28) Lathe Machine , 380 volts , 3 phase – 1 unit √ - In- charge for Workshop operation and Vehicle maintenance & repair. √ - To carry out any other duty assigned to by the management from time to time and perform related duties as required such as : 1) Assisting Design Department for the electrical matter of the project and act as the Consultant for the electrical plan. 2) Assisting QA / QC Department for the electrical matter of the project and act as Consultant for the electrical plan. 3) Planning and Scheduling of Building maintenance and repair for office, accommodation and auxiliary building.

Utility Control Captain / Yakult Philippines Incorporated ( Food & Beverages Manufacturing ) Facilities Engineer Bo. Makiling , Calamba , Laguna , Philippines ( Aug. ’98 – July ‘ 08 ) Certified ISO 9001, 14001,OHSAS 18001 & HACCP

Duties and Responsibilities:

√ - To restore and retain plant equipment, to ensure the safely, availability and reliability of the plant and equipment through well-design system categorized as routine, preventive and predictive maintenance along their life cycle. √ - Supervision & Preparation of activities for Engineering Staffs

√ - Supervision of Building Maintenance and repair by Staffs

√ - Supervision of Operation and Maintenance & Troubleshooting of Facility Machineries such as : ● Substation & Switchgear room

1) Transformer 2000 KVA2) 2000 KVA Caterpillar Generator3) 500 KVA Caterpillar Generator4) Capacitor Cells ( for unity power factor )5) Main Distribution Panelboards

● Intake & Exhaust Systems ● Airconditioning Units

Page 8: CV-RESUME J. C. Bernal-Detailed

1) 4 units Centralized Type2) 15 units Split Type3) 10 units Window Type

● Air compressor systems1) 2 units Atlas , 11 kw2) 1 units Atlas , 22 kw3) 2 units Atlas , 44 kw4) 4 units Atlas Air Dryer

● Water Treatment Facilities

1) 2 tank- Sedimentation Tank2) 2 units- Deepwell pump3) 2 units- Sand Filter4) 2 tank- Cistern Tank5) 2 units- Chlorine Dosing pump6) 1 unit- Chlorine Analyzer7) 1 tank- Accumulator Tank8) 1 tank- Hydro-pneumatic Tank9) 2 units- Softener Tank10) 2 units- Carbon Filter Tank11) 1 lot – Chilled Bank (treated water) with

Cooling system (glycol)12) 3 units- Sand filter Pump13) 1 unit – Accumulator Pump14) 3 units Hydro-pneumatic Pump15) 1 unit – Booster Pump

● Boiler’s

2 units – Enertec Horizontal tube w/ wet back 150 hp & 80 hp ● Chilled water Systems – glycol cooling in chill with 2 units – condensing unit ● Cooling tower system 2 units - Big & Small Cooling tower ● Motor & Pumps systems ● Waste Water Treatment Facilities

1) Biological Activated Sludge System- aerobic2) 500 cu. meter treatment capacity3) Laboratory for BOD , COD , Tss/MLss ,

Oil & Grease , P/N testing4) Control Room5) Submersible Pumps & Motors for :

a) Lifting b) Transferc) Cleaning (portable)

Page 9: CV-RESUME J. C. Bernal-Detailed

6) Aeration Tank7) Clarification Tank w/ motor scraper8) Chlorine Contact Chamber w/ chlorine

dosing Pump

9) Sludge Thickener Tank with feed pump10) Sludge Holding Tank with transfer pump11) 3 units – 50 HP Root type Air Blower12) 1 unit – Sludge Belt-Press Machine with

Chemical pump & tanks ● Lighting Systems

√ - Supervision of Preventive Maintenance of All Electrical Machines & Equipments. √ - Supervision of mechanical & electrical controls troubleshooting for Machineries & Equipments. √ - Assigned as SAFETY OFFICER of the factory and member of the HEALTH & SAFETY COMMITTEE OF THE COMPANY & performed the duties as follows :

a.) Anticipate , identify & evaluate hazardous conditions & practices.

b.) Develop hazard control designs , methods , procedures & programs.

c.) Implement , administer & advise others on hazard control programs.

d.) Measure , audit and evaluate the effectiveness of hazard control programs.

e.) Draft a future safety plan & statement based on real time experiences and facts.

f.) Implement industrial hygiene & toxicology , fire protection system , system & process safety , education & training methods and measurement of safety performance.

√ - Supervised the Expansion Project of the factory regarding additional electrical design & construction.

Maintenance Supervisor Foodlinks Incorporated ( Fast food Chain Restaurant’s )(March ’98 – Aug. ‘98) Tektite Tower, Ortigas Center, Pasig , Philippines

Duties and Responsibilities: √ - Supervision for the operation , maintenance & troubleshooting of fast food equipment & machineries such as :

Page 10: CV-RESUME J. C. Bernal-Detailed

a) Soft-drink Dispenser Machineb) Ice Maker Machinec) Refrigeration Cabinet (chest type & upright)d) Food Warmere) Dishwashing Machine f) Air-conditioning unitsg) Intake & exhaust system w/ motor’sh) Coffee Maker Machinei) Chilled Cabinetsj) Microwave Ovenk) Water pumps & motorsl) Lighting System & fixturesm) Generatorsn) Ice Cream Maker Machineo) Chicken & French Fries Fryerp) Burner ( gas & electric )

√ - Supervision for the electrical & mechanical troubleshooting.

√ - Supervision for the implementation of preventive maintenance of all electrical equipment & machineries.

√ - Supervision for building maintenance and repair by subordinates.

Officer in Charge (Gen. Maintenance Dept.) Emerald Pizza Incorporated ( Pizza Hut Restaurant’s )(Feb. ’91 - March ’98) Annapolis Greenhills , San Juan City , Philippines

Duties and Responsibilities:

√ - Supervise & Monitor the maintenance staff & technicians for their specific task & duties to be properly done. √ - Supervision for the staff’s work during building maintenance and repair. √ - Supervise the troubleshooting of all electrical equipments & machineries. √- Supervision of the operation, maintenance & troubleshooting for all electrical equipments & machineries such as :

a) Pizza Oven ( conveyor & gas type )b) Dough Mixerc) Dough Rollerd) Dishwashing Machinee) Chiller unitf) Refrigeration Cabinet

Page 11: CV-RESUME J. C. Bernal-Detailed

g) Microwave Machineh) Freezer cabinet ( chest & upright freezer )i) Air-conditioning unit ( centralized , split type &

window type )j) Intake & exhaust motorsk) Ice Maker Machinel) Chicken & French fries Fryerm) Soft-drink Dispensern) Drainage Systemo) Coffee Maker Machinep) Water Pumps & Motorsq) Generators

√ - Preparation & Implementation of the Preventive maintenance Schedule of all electrical equipments & machineries. √ - Ensure the implementation of Health & Safety Policies of the company. √ - Prepare the electrical design and installation for the construction of additional Pizza Hut Restaurant’s.

Industrial Electrician Cosmos Bottling Corporation ( Food & Beverages Manufacturing )(July ’90 – Jan ‘ 91) Mc Arthur Highway , Bulacan , Philippines

Duties and Responsibilities:

√ - Assigned as Shift Industrial Electrician √ - Performed building maintenance and repair such as plumbing ,carpentry , painting , electrical , drainage system , ac units , welding & acytheline works etc. √ - Troubleshooting of electrical wiring & controls , Pump & Motor & Motor controls.

√ - Installation of electrical wires, lighting fixtures & electrical controls. √ - Operation & Maintenance and troubleshooting of generators.

Electrician/Technician 680 Home Appliances Incorporation(Jan ’87 – May ’88) (Home Appliances Commercial Establishment) Edsa, Quezon City, Philippines

Duties and Responsibilities: √ - Assigned as Electrician / Technician

Page 12: CV-RESUME J. C. Bernal-Detailed

√ -Assigned for the building maintenance and repair works such as electrical, mechanical, painting, carpentry, ac units, plumbing, drainage system , welding works , etc. √ - Operation, Maintenance & Troubleshooting of generator. √ - Troubleshooting of electrical panel, wires & appliances. √ - Installation of electrical wires & control’s & lighting fixtures.

REFERENCE:

1) Marlon FrondaHSE OFFICERAL KIFAH PRECAST COMPANYAbqaiq Road, New 2nd Industrial City, Ad Dammam, Saudi ArabiaTel. : +96638029144-9166; +96638082766-2799 ext. 092Mobile No: +966548506405

2) Mark SantanaIMS-MR / LEAD AUDITORAL KIFAH PRECAST COMPANYAbqaiq Road, New 2nd Industrial city, Ad Dammam, Saudi ArabiaTel. : +96638029144-9166 ext. 092Mobile No: +966566249482

3) Rolando “rolly” PenaUTILITY DEPARTMENT SUPERVISORYAKULT PHILIPPINES INCORPORATEDBo. Makiling, Calamba City, Laguna, PhilippinesMobile No: +639198252580 or +639173070448

4) Roberto AlmorfeAGRI / ADMINISTRATION MANAGERESSENTIAL FRUITS INCORPORATED (EFI)Km. 80 , Brgy. Malatgao, Narra PalawanMobile no. +639175770320