CV - Philip Turner [Photo] - Nov 2015

CURRICULUM VITAE – Philip Turner DOB 19-Jun-1966Principal Mechanical Engineer BEng (Hons)Email : [email protected] : +44 (0) 7510 905528

Confident, versatile and highly motivated, 25 years plus experience, in oil & gas, petrochemical, power generation and nuclear industries

Solid capabilities in technical and project engineering, vendor package management and development of technical project documentation including specifications, project definitions, bid evaluation reports, data sheets etc.

Strong leadership and team player skills as a Lead or Principal Senior Engineer Considerable experience and knowledge in a wide range of packaged, rotating and static equipment Adaptable and flexible with strong transferable skill capabilities, enabling employment on a wide

range of UK and overseas projects Offshore and onshore project experience including topside upgrades, gas turbine packages,

petrochemical projects, materials handling projects, power station construction projects including coal-fired, combined-cycle, hydro and nuclear projects

Worked for several large engineering enterprises including Petrofac, Jacobs, Foster Wheeler, Fluor, Aker Solutions, Mitsubishi, Poyry Group (Electrowatt Ekono), Day & Zimmermann, Simon Carves, Snamprogetti, Rolls Royce Power, and Alstom

Graduated from Sheffield University in1990 with BEng(Hons) in Mechanical Engineering Technician apprenticeship & university graduate training background

EXPERIENCE AND KNOWLEDGE PROFILEI have extensive experience in both EPC and PMC type work. My main areas of speciality are in mechanical equipment and packages (rotating machinery, package and static equipment) for oil & gas, petrochemicals, pharmaceutical, plastics, nuclear and power generation industries. I have undertaken multi-discipline project engineering from initiation stages and early FEED development through to Detail Design and Construction, Post Construction activities including commissioning and plant handover. Rotating Equipment knowledge includes centrifugal & PD pumps for water, chemicals, oil and sludge; reciprocating, rotary screw & centrifugal compressors for both gas and air applications; small gas turbine packages (RB211s); associated auxiliary systems for rotating equipment including seals, cooling and filtration systems.Package equipment knowledge includes chemical injection systems, HVAC systems, plate heat exchangers, various crane systems, bespoke handling systems, cooling tower packages, pellet extruders, boiler packages.

KEY SKILLS Vendor package management, preparation of technical specifications, data sheets, tender bid analysis reports, supplier documentation reviews, HAZOP and risk assessment reviews, assessment of requirements for regulatory directives (CE marking, PED, ATEX, Machinery Directive), project and interdisciplinary co-ordination, discipline manhour (EESe books/CTRs) and project scheduling assessments, technical support to clients and site personnel during construction & commissioning activities. Solid familiarity of industrial standards for wide range of equipment (ISO/EN/BS/API/ASME/DIN etc)

OVERSEAS EXPERIENCEI have worked extensively overseas in mostly PMC type roles and some EPC, particularly from 2003 through to end of 2010 and includes the following countries; Egypt, UAE, Saudi Arabia, Iran, Vietnam, China, India and Netherlands. These were mostly petrochemical, oil refinery and power generation projects.

CAREER HISTORYPage 2 – Most Recent Employment History – February 2013 to CurrentPage 3 – Employment History with Jacobs Engineering & Foster Wheeler – April 2005 to Feb 2013Page 4 & 5 – Older Employment History – 1982 to 2005

of 5

CURRICULUM VITAE – Philip Turner – Principal Mechanical Engineer

Most Recent Employment History – February 2013 to Current

Highlights with PETROFAC OP&O, Aberdeen – Feb 2013 to Present (2 years 9 mths +) : From June 2013 to January 2014 I was the lead engineer assigned to the Seawater Injection Upgrade FEED project for Apache’s Beryl Alpha. This involved issuing formal enquiries and completing bid evaluations for several major mechanical packages including 3x 3MW barrel type injection pumps.From April 2015 to October 2015 I was appointed lead engineer for Chevron projects covering the Alba and Captain assets. The main activities included the issue of formal enquiries and bid evaluation for 6 off pumps and 1 off vessel internals for the Reject Oil Processing Project for Chevron’s Alba Northern asset.I also undertook the vendor management of several mechanical packages from order placement through to installation and commissioning stages – including 2 x HVAC packages, instrument air compressor package, 2 x chemical injection packages, 2 x pig trap vessels, crane crab replacement and lifeboats.

Summary of Responsibilities as Principal / Lead Mechanical Engineer:Manage and assign project tasks within the mechanical discipline teamManage project manhour budgets and report to Planning & ProjectsReview Client’s Scope of Requirements (SORs) Prepare manhour estimates for Initiation, FEED and Detail Design phases of a project as appropriatePrepare scope definitions and materials estimates for a projectPrepare, review and approve mechanical discipline deliverables including:Requisitions, Specifications, Data Sheets, Technical Notes, Bid Evaluation Reports, SchedulesParticipation in project design reviews including HAZOPs and constructability reviewsLiaison and support to Projects, Procurement, Planning, Engineering & QA disciplinesConduct management of vendor packages and services including:technical documentation review, attendance of kick-off meetings, pre-production meetings, factory acceptance testing, installation and commissioning support activities

Projects & Packages:Brownfield projects including maintenance overhauls, replacements, upgrades, & facility extensions.Chevron – Alba Northern, Reject Oil Processing, FEED, Centrifugal OH2 & VS6 Pumps & Vessel Internals,Alba Northern, Diesel Improvement Project, Initiation Study, Diesel Centrifuge PackageCaptain WPPA, Polymer Injection Facility Extension, FEED & Detail Design, Double Diaphragm Pump Head (SPX)Captain FPSO, FEED & Detail Design, Calorifier Replacement, Two new calorifier vessels (Termojet)Apache – Beryl Alpha, Seawater Injection Upgrade, FEED, 3x3MW Injection Pumps , 3xBooster Pumps, Plate Heat Exchangers, Chemical Dosing Packages, Electrochlorination Package, Seawater Filtration PackageBeryl Bravo, MCC2 Equipment Cooling Enhancement & Delta V Equipment Room, Detail Design, HVAC Equipment (Condensing Units & Fan Coil Units - Tyco)Beryl Bravo, Instrument Air Upgrade, Detail Design, 2x Electric Screw Compressors, 1 Dryer Package, 1xDiesel Compressor (MB-Air Systems)Forties Alpha, Bacchus Scale Inhibitor Facilities, Detail Design, 1x Scale Inhibitor Dosing Package (SMS)Forties Bravo, Lifeboats & Davits Replacement, Detail Design, Lifeboats & DavitsForties Charlie, NGL Compressor Replacement, Detail Design, 2x Condensate Pumps (HMD), Gas Residue Cooler Fin Fans (Spiro-Gills), Gas Turbine Enclosure (Bomar), Turbine Air Intake Ducting (AAF), NGL Crane Crab (Enermech)SAGE & Beryl Alpha, PIG Trap Replacement, Detail Design, PIG Receiver & PIG Launcher vessels (Glapwell)Forties Alpha AVIAT, MEG Injection Facilites, FEED & Detail Design, MEG Injection Pump Package (LEWA) Total – Laggan Tormore, Sullom Voe SGP - HCl Acid Dosing Plant, FEED, drain pumps (vertical Mag-drive centrifugal - Axflow), MEG mixing & transfer pumps (Horizontal OH2 – PFA lined - Richter), HCL Dosing Package 2x DD – Hastelloy – SPX)Maersk – Janice, Additional Crude Oil Basket Strainer, Detail Design, Basket Strainer (Barton Firtop)

of 5


Employment History with Jacobs and Foster Wheeler – April 2005 to Feb 2013

JACOBS E&C Ltd (Aker Solutions) – Warrington, UK – Apr 2011 to Feb 2013 (1 year 10 mths)

Highlights: I worked on the Tails Management Facility (TMF) Project for Urenco’s Capenhurst facility. The facility was designed to handle the tail end processes arising from the deconversion of depleted uranium to uranium oxide.I was responsible for the package management of several major packages including; hydraulic wash stands for UF6 cylinders, In-drum dryer package, heels removal vacuum package, degasser unit & vacuum package, paddle dryer vacuum package, site wide supply of glove box sampling cabinets, site wide supply of safety showers and eyewash stations. These packages were managed from enquiry through to order placement and then vendor management.

Summary of Responsibilities as Senior Mechanical Engineer:Review Client’s Specifications Prepare, review and approve mechanical discipline deliverables including:Requisitions, Specifications, Data Sheets, Technical Notes, Bid Evaluation Reports, SchedulesParticipation in project design reviews including HAZOPs and constructability reviewsLiaison with the client project management teamLiaison and support to Project Management, Procurement, Planning, Engineering & QA disciplinesConduct management of vendor packages and services including:technical documentation review, attendance of kick-off meetings, pre-production meetings

FOSTER WHEELER – UK, Netherlands, China, Saudi Arabia, India - Apr 2005 to Dec 2010 (5+ years)

Highlights: I initially began work with Foster Wheeler in Reading working on the Sharq3 Expansion and Rabigh Development FEEDs for the first 4 months before agreeing to an assignment that lasted more than 4 years on the YANSAB Polyolefins Project joining the client’s (SABIC) resident team undertaking a PMC role as a materials handling specialist. I remained on the project throughout the three main phases, Basic Design Phase at Aker Solution’s offices in Zoetermeer, Netherlands, Detailed Design Phase at Sinopec’s offices in Shanghai and then finally the Construction Phase in Yanbu, Saudi Arabia. In 2009 I was assigned to the Paradip Refinery Project to provide support and supervision of the EPC work at Foster Wheeler’s Chennai offices.

Summary of Responsibilities as PMC Mechanical Engineer on the YANSAB project: (Aug 2005 to May 2009)Review EPC contractor’s mechanical discipline deliverables including:Requisitions, Specifications, Data Sheets, Technical Notes, Bid Evaluation Reports, SchedulesParticipation in project design reviews including HAZOPs and constructability reviewsLiaison with EPC Contractor’s Project Management, Procurement, Planning, Engineering & QA disciplinesMonitor EPC Contractor’s vendor management including:technical documentation review, attendance of kick-off meetings, pre-production meetings, FATsSupport PMC Construction Manager in monitoring the EPC contractor’s site activities for the mechanical packages.Turn Over and Mechanical Completion manager and review the turnover and mechanical completion packs.

Main Equipment Reviewed: Extruders & pellet water systems, Product purge & additive feed systems, product handing unit and pneumatic conveying, jumbo bag & sack filling, palletising. Cycle Gas Compressors, Refrigeration Compressor, Nitrogen Compressor, Various pump packages, various heat exchangers and vessels, other miscellaneous equipment.

Paradip project - India, Chennai - Jun 2009 – Dec 2009: Supervision & support of Mechanical dept. packaged equipment discipline – specifications, data sheets, requisitions, TBAs

Sharq3 Expansion and Rabigh Development Projects, Reading, UK - Apr 2005 – Aug 2005: Preparation of requisitions, bid conditioning for U&O boiler package, Air compressors, PE Additives Feed System.: Preparation of specifications/requisitions and bid conditioning for the following equipment; Marine Loading arms, Cooling Towers, Decanter Centrifuge, Wet Electrostatic Precipitators, Vacuum Column Ejector Package.

of 5


Older Employment History - 1982 to 2005

ELECTROWATT EKONO April 2004 to April 2005UONG BI Thermal Power Plant 300MW Extension ProjectBalance of Plant Discipline Lead Engineer based in Hanoi, VIETNAMUong Bi Thermal Power Plant 300 MW Extension Project. Team leader for the Balance of Plant discipline carrying out PMC supervision of main EPC contractor. Packages handled within the discipline included cooling water system, fire fighting & protection system, waste & water treatment, hydrogen generation and compressed air plants, fuel oil storage system and interplant piping. Towards end of detailed engineering phase undertook role of building services and layout coordinator for the entire project.

SNAMPROGETTI February 2003 to March 2004PMC Mechanical Engineer based in Tehran & Assaluyeh, IRANAs the sole site-based PMC mechanical engineer undertook supervision and review of EPC Contractors deliverables for Petrochemical complex utility centre. Responsibilities included review of detailed design documents and supervision of mechanical erection for 6x123MW CHP plant; air separation plant; desalination plant; water and waste treatment plants; cooling water pumping facility; port topsides process unloading facility; process & utility interconnections; and utility interfaces. Part of commissioning advisory team for Unit 1 Gas turbine. Set up of overall project document register & correspondence database.

DAY & ZIMMERMANN & ROLLS ROYCE - August 2000 to February 2003Lead Mechanical EngineerEnquiry/specification of mechanical equipment for several projects including materials handling with clients such as Dupont and Rhodia, taking lead role on projects for mechanical discipline including preparation of manhour & cost estimates, project progress tracking, bid appraisals and vendor package management. Equipment involved includes spiral incline conveyor, mill grinder, FIBC dischargers, sack tipper, pneumatic conveying equipment, silos, agitators, reactor vessels, rotary valves, rotary gear pumps, centrifugal pumps, and gas turbine packages (for Rolls Royce). Other responsibilities included overseeing HVAC and Fire Prevention projects, preparation of mechanical scope of work documents. Supervision of dismantling, matchmarking of shrink film making plant.

On secondment to Rolls Royce; Project & design engineering of RB211 gas turbine packages for power generation and compression on oil and gas projects including acoustic packages, lube oil units, hydraulic starters, fire suppression systems, dry and wet gas seal systems, and foundation loading analysis.

SIMON CARVES LIMITED February 2000 to August 2000 Mechanical Machinery EngineerPreparation of specifications/requisitions on Titanium Dioxide Expansion Project, bid conditioning, vendor meetings, document review for rotating equipment and mechanical plant including end suction pumps, metering pumps, liquid ring compressors, blowers, bag filters, steam microniser, demister vessel, acid pump, vertical slurry pump, sump & vessel agitators, scrubber fan, bin dischargers, air vibrators, vibrating screen, screwfeeders.

FLOMAT BAGFILLA LIMITED (October 99 TO February 2000)Senior Engineer Preparation of technical documentation of FIBC filling & weighing systems for client submittal, translation of French technical documents into English.

KAISER ENGINEERS LIMITED (March 99 TO September 99) Ezz Heavy IndustriesPiping & Services Project Engineer (Cairo based) Ain Sukna, EgyptCo-ordination and review of project correspondence, design information and contractor drawings, review of P&IDs and piping/equipment arrangement drawings, and progress monitoring of Erection Contractor.

of 5


FLUOR DANIEL LIMITED (January 98 TO February 99)Mechanical Design Engineer

Projects Client LocationPharmaceutical plant (on-site) WARNER LAMBERT Cork, Rep. of IrelandCompounder facility LAPORTE Melton Mowbray, UKFungicides facility DUPONT Asturias, SpainChemical Process facility ALLIED COLLOIDS West Memphis, USA

Preparation of requisitions, bid evaluations, on-site technical support, P&ID mark-ups, vendor management of rotating equipment and mechanical plant including compounders, pelletizing system, fired-boiler package, cooling towers, CW pumps, CW treatment package, compounder cooling package, rotary gear pumps, ribbon blenders, sieve classifiers, compressor plant, loss-in-weight feeder package, hopper mixer, storage silos, blower fans and pumps.

FOSTER WHEELER (JUL 97 TO DEC 97)Packaged Equipment Engineer AMOCO, Geel, BelgiumParaxylene Production Plant project for Amoco. Preparation of requisitions for packaged equipment including vendor management of cooling tower, elevated flare and chemical dosing packages. Equipment review meetings with client. Technical review and kick off meetings with vendors. Review of vendor documentation.

MITSUBISHI CONSORTIUM (June/July 97)Design Services Co-ordination Engineer Dubai based, DEWA, UAEWorking on a Gas Turbine Combined Cycle Power Project, responsibilities included the co-ordination of Contractor services for gas reception facility and preparation of construction dossiers for Client approval.

GEC ALSTOM POWER PLANTS LIMITED (SEP 82 TO MAY 97)Mechanical Project Engineer (April 91 to May 97)Equipment calculation & selection, preparation of specs/requisitions, bid appraisals, presentations to clients, technical support / trouble shooting service to site, design reviews, documentation review and vendor management.

Project Client PeriodPergau Hydro Power Station (Malaysia) SMEC Jul 96 - May 97Smurfit Townsend Paper Mill CHP Plant Scottish Hydro Jul 96 - May 97Shajiou C Coal fired Power Station (China) Hopewell Holdings Jul 96 - May 97Connahs Quay Combined Cycle Plant PowerGen Jun 93 - Mar 97BlackPoint Combined Plant (Hong Kong) China Light & Power Jun 92 - Jul 96Little Barford Combined Cycle PlantNational Power Apr 91 - Dec 93Barking Reach Combined Cycle Plant Barking Power Dec 91 - Sep 94

Summary of equipment requisitions handled on above listed projects:-Main & Auxiliary cooling water pumping systems; Boiler feedwater & condensate extraction pumping systems; Site waste water & drainage systems; Fuel gas heating plant; Air compressor plant, storage and distribution; Gas generation, compression, storage & distribution; Chemical handling, dosing & sampling systems; Mechanical handling including overhead cranes, hoists, fork-lift trucks; Workshop, stores & laboratory equipment; Fire detection and prevention systems; Pre-treatment, demineralisation, effluent treatment plants.

Graduate Training (Sept 90 to Apr 91) Training periods in Purchasing, Mechanical Dept, Tendering and Pipe design. Undergraduate Training (July/Aug 88 & 89) Training periods during university vacations in Tendering Department.Mechanical / Electrical Draughtsman (Jun 86 to Oct 87) Preparation of piping/plant layouts, P&IDs, vessel drawings.Technician Apprentice (Sept 82 to Jun 86) Broadbased engineering training school, training in various machine shop and factory departments, Drawing office training.

QUALIFICATIONS:BEng (Hons) in Mechanical Engineering (1990), HNC & ONC (BTech) in Mechanical & Production Engineering. (1982 to 1986), ‘A’ level Applied Mathematics (1986), 10 ‘O’ levels including Mathematics & English Language. (1981/82)

of 5

CV - Philip Turner [Photo] - Nov 2015

Documents

Transcript of CV - Philip Turner [Photo] - Nov 2015