M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

A multi-skilled individual looking for a challenging job as a fire protection engineer in learning

environment for the enlargement of the organization with increased profit level.

1. Good command over the Testing and Maintenance requirement of Fire protection systems.

2. Expert in Integrity testing. Certified Level 3 Tester.

3. Mere Knowledge in Fire alarm systems and other life safety requirements.

4. Expert in Design of Low pressure Clean Agent systems.

5.

1. Hardworking with good communication skills

2. Quick Learner

3. Flexible to work in any stage of a project ( design, sales, Installation and testing and

commissioning)

4. Good Planning skills with knowledge of MS project.

5. MS office

6. Good Negotiation skills

7. Involved in Estimation and sales for short period

8. Involved in procurement coordinating with vendors.

2013 – Training for Integrity test by Building Doctor (Level 3 Certified Tester)

Qatar UPDA certified Engineer and Qatar Civil Defense approved Engineer

1

Career objective

Trainings & Certifications

Technical Skills

Personal Skills

M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

1. 2011 – Till date:

Fire protection Engineer - M/s JBK Controls WLL

♦ Multiple Skilled Individual - Coordinating at all stages of a project (from design to commissioning).

♦ A Designer:

1. Detailed knowledge in the design, installation and testing commissioning of FM200, NOVEC system.

2. Detailed knowledge in carrying out hydraulic calculation for FM200 and NOVEC systems with TYCO, KIDDE software:

3. Preparing Technical submittals as per the project specification, NFPA and local regulations

4. Preparing shop drawings for all the Firefighting system as per the local civil defense, NFPA requirements and coordinating with consultant/ local AHJ for the approval.

♦ A Planner

1. Preparing Project schedule using MS Project.

♦ Estimator and Sales Person

1. Involved in Estimation and sales for a brief period of time.

2. Involved in the site survey to collect the data required for the design and estimation for tenders.

3. Coordinating with Client and contractor meet their requirements

♦ Procurement Coordinator:

1. Coordinating with the local and international vendors for the materials related to firefighting projects.

2. Negotiation the prices to meet the project cost.

♦ Testing and Handing Over:

1. Conducting Enclosure Integrity test, certified Level 3 Technician. Carried out more than integrity testing of more than 300 rooms and few rooms with more than 5000 cu.m volume.

2. Carrying out inspections with consultant and local AHJ during project handover.

2

Work Experience

M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

3. Preparing close out documents like (fire pump acceptance checklist, contractor material test certificates, T&C certificate etc.,) of all the firefighting projects.

4. Preparing checklists as per NFPA, local and manufacturer requirements for the maintenance activities.

♦ A Trainer

1. Providing End user training to the Client for firefighting system with the use of power point presentation.

Major Projects worked in Doha – Qatar:

- Proposed hypermarket at West Nuaija – Installation of fire pumps, sprinklers system, fire hose reel network and clean agent system. (Role – Project Engineer)

- Worker hospital and Integrated Health center – Installation of firefighting system which includes underground(GRE), above ground piping, fire pump, FM200 system, Helipad Foam system, Deluge preaction system. (Role – Design, procurement, Installation coordination and project still in process)

- Smeet Precast Factory – Life safety package 3 – Installation of Above ground and underground piping (HDPE) for sprinkler and hydrant system and FM200 system. (Role – Design, procurement, Installation coordination and project still in process)

- New Doha International Airport – CP17 – Installation, Testing and commissioning of FM200 system (Role – Design, Installation, Testing & commissioning)

- Pearl Qatar Viva Bahariya 22 and 23 – Installation, testing and commissioning of FM200 system (Role – Testing & commissioning)

- Helipad at HMC Multistorey Car park building – Installation, Testing and commissioning of balanced proportion Foam system with pump skid and oscillating monitors, Fire pump systems. (Role – Design, procurement, Installation coordination)

- OOREDOO Customer care and Technical Building at Mesaimeer – Installation, Testing and commissioning of NOVEC system (Role – Design, procurement, Installation coordination)

- Equipment rooms of Ministry of Interior – 20 locations – Installation, Testing and commissioning of FM200 systems (Role – Design, procurement, Installation coordination, testing and commissioning)

- Ashghal O&M warehouse at salwa road – Installation of firefighting system which includes fire pump, above ground and underground (Ductile Iron) piping, Fire hose reel and Fire pumps. (Role – Project Engineer)

- Barwa city phase I – Installation of 48 sets of fire pumps for 48 residential buildings along with FM200 systems for the utility building. (Role – Project Engineer)

3

M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

- Kidde fire protection system – clean agent systems

- TYCO – MACRON fire safety products – clean agent systems

- Chemguard – Foam systems

- Pentair – Fairbank Morse, Aurora

- Retrotec Certified Level 3 Technician for Integrity Test

2. September 2009 –2011 :

Site Engineer – EEPL - Erection, Testing and Commissioning of Secondary Cycle Piping

Package for Nuclear Power Corporation of India Ltd (NPCIL), at Kudankulam Nuclear Power

Project (Unit 2 x 1000 MWe ), Tamilnadu (Under the Sub Contractor of M/s. BHARAT HEAVY

ELECTRICALS LIMITED – Southern Region

Responsibility as Erection Engineer:

1. Co-ordination with Quality Control department, planning of daily welding and radiography activities based priorities and testing schedules.

2. Identification of required materials as per Approved Erection and Fabrication drawings.

3. Co-ordination with Client for defects in materials, routing deviations, erection constraints, approvals, etc.

4. Sub-contractor Labor management

5. Presentation of daily, weekly and monthly progress reports to Client

6. Leading a team of supervisors

7. Identifying extra works, extra material / manpower supply and claim contractually

Responsibility as QC Engineer:

8. Ensuring the fit up inspection in pipelines.9. Verifying all Nondestructive testing procedures and getting approval from clients.

10. Preparation of welding inspection record (WIR) for entire pipe lines.

11. Monitoring all QC & NDT activities as per project quality plan and inspection test plan

and controlling activities of all NDT and QC technicians and coordinating with all QC and

NDT inspectors.

4

Products/Systems Specialization

M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

12. Conducting all NDT, Mechanical, QC inspections and creating inspection records and

getting signed from all relevant parties and sending properly to document or record

control department.

Nationality: INDIAN

Passport #:H9987438

Language Known: Tamil, Hindi and English (To read, write and speak)

5

Personal Details

M. Mubarak Ali Email: jmubarak@gmail .com Mob: 00974 – 33769142, 00974-33286388

12. Conducting all NDT, Mechanical, QC inspections and creating inspection records and

getting signed from all relevant parties and sending properly to document or record

control department.

Nationality: INDIAN

Passport #:H9987438

Language Known: Tamil, Hindi and English (To read, write and speak)

5

Personal Details