Cutting Machines

schoen + sandt machinery GmbH Lemberger Stra e 82 D-66955 Pirmasens Tel: +49 63 31 – 713 100 info@schoen-sandt.de www.schoen-sandt.com

More than 150 yearsof perfect solutionsMore than 150 yearsof

www.schoen-sandt.de

Technical Catalog

Since the beginning – that means for the last 150 years or so – we have specialised in cutting machines, starting with the design,to the manufacture, commissioning and then the maintenance.

Starting out as suppliers to the shoe industry, we soon branched out into other areas such as the automotive industry, rubbers and plastics, home textiles, printing and packaging, textiles and garments, and abrasives

– with machines designed for processing mostly all non-metallic materials.

Cutting Machines

Built to last, economical to use

The elaborate, sturdy construction of our machines supported by computer-controlled automation makes the process extremely accurate.

This enabling us not only to meet the high demands of the market, but also to help our customers improve the effi ciency of their operations.

2

Illustration 3D construction

Examples of cutting materials

with manual placement of material and cutting tools

Hydraulic Swing Arm Cutting Machine Type 1018

Technical data:

Cutting force: 220 kN

Swing arm width: 350, 450 or 550 mm

Size of table: 450 x 900 mm

Benefits:

• Modern PLC control Siemens S7

• Improved forced-feed lubrication for easy moving of the swing arm

• Exact low point switching by absolute encoder

• Control of swing arm uparching and fast die adjustment

• Available with various widths of swing arm

Hydraulic Swing Arm Cutting Machine Type 1028 C

Technical data:

Cutting force: 200 kN

Swing arm width: 550 mm

Size of table: 500 x 1000 mm

Benefits:

• Cost-effective machine with superb price-performance ratio

Cutting Machines

Equipment option:• Table enlargement for sheet material• Side stop for swing arm• Swing arm fixing equipment

Image of machine type 1018

Image of machine type 1018 C

Equipment option:• Additional vacuum pump• Die storage rack

3

Image of machine type 7072 M

Electro-Hydraulic Crosshead Die Cutting Machine Type 7072 M

Technical data:

Cutting force: 250 kN

Size of cutting platen: 650 x 650 mm

Table size usable: 1800 x 650 mm

Table size total: 2250 x 650 mm

Features:

• Easy to use, manually crosshead die cutting machine with servo-controlled crosshead drive and Siemens PLC-control

• Machine for handling of material with a width of max 1800 mm

• Handling of sheet material as well as roll material is possible

• Cost-effective variant

with manual placement of material and cutting toolsCutting Machines

Image of machine type 7072MA

4

Features:

• Easy to use, manually crosshead die cutting machine

with servo-controlled crosshead drive and Siemens PLC-control

• Machine for handling of material with a width of max 1800 mm

• Handling of sheet material as well as roll material is possible

Electro-Hydraulic Crosshead Die Cutting Machine Type 7072MA

Technical data:

Cutting force: 250 kN

Size of cutting platen: 650 x 650 mm

Table size usable: 1800 x 650 mm

Table size total: 2250 x 650 mm

Easy to use, manually crosshead die cutting machine

Handling of sheet material as well as roll material is possible

1800 x 650 mm

2250 x 650 mm

All cutting machines of this type are arranged in solid welded steel construction with centrally adjustable mechanical low point

stops and, depending on the model, they are equipped with Siemens S7 PLC control or industrial PC-control. In addition to

this there is a wide variety of special equipment available for the full spectrum of applications and industries.

Hydraulic Crosshead Cutting Machine Type 2062

Technical data:

Machine bed: 2750 mm x 750 mm

Cutting platen: 650 x 650 mm

Cutting force: 300 kN or 500 kN

Hydraulic Crosshead Cutting Machine Type 2071 BZ

Technical data:

Machine bed: 2400, 2600, 2800 or 3200 mm

Table depth: 700, 900, 1100 or 1400 mm

Cutting platen: 550 x 550 mm - 1200 x 1000 mm

Cutting force: 300 kN, 500 kN, 750 kN or 1000 kN

with motorized cartsCutting Machines

Feeder option:• Clamping beam feeder• Cutting belt unit with cardboard-fabric cutting belt• Roller feeder• Automatic sliding table

Equipment:• Cutting die fixing• Automatic cutting die height adjustment• Mechanical low point stops• Siemens IPC-control Touch Panel

Option: • Rotary Drive• Cutting plate shifting device

Equipment: • Cutting die fixing

Option: • Motorised low point stops • Rotary drive• Pneumatic product ejection

• Dust protection unit for abrasive materials • Automatic cutting board shifting device • Special accessories for various applications

Feeder option:• Automatic sliding table• Roller feeder• Clamping beam feeder• Cutting belt unit• Cardboard cutting belt unit• Suction belt unit

5

Image of machine type 2062

Image of machine type 2071 BZ

6

Hydraulic Cutting Machine Type 2070 Machine with stationary pressure unit

Technical data:

Cutting platen: 550 mm x 550 mm - 1500 x 1400 mm

Cutting force: 300 kN, 500 kN, 750 kN and 1000 kN

Image of machine type 2070

Crosshead Cutting Machines

Feeder options:

• Automatic sliding table

• Roller feeder

• Clamping beam feeder

• Cutting belt unit

• Cardboard cutting belt unit

• Suction belt unit

with manual placement of material and cutting tools

6

Equipment:

• Cutting die fixing (incl.)

• Open side construction (incl.)

Option:

• Motorised low point stops

• Automatic cutting board shifting device

All cutting machines of this type are arranged in solid welded steel construction with centrally adjustable mechanical low point

stops and, depending on the model, they are equipped with Siemens S7 PLC control or industrial PC-control. In addition to

this there is a wide variety of special equipment available for the full spectrum of applications and industries.

Hydraulic Upstroke Cutting Machine Type 5300, 5300A

Technical data:

Dimension / Cutting force: 1200 mm x 800 mm - 630 kN

1600 mm x 800 mm - 800 kN

1700 mm x 1050 mm - 1000 kN

1800 mm x 1050 mm - 1000 kN

Hydraulic Upstroke Cutting Machine Type 5320

Technical data:

Dimension / Cutting force: 2100 mm x 1050 mm – 1000 kN

2500 mm x 1050 mm – 1000 kN

Cutting Machineswith receding beam

Feeder option:

Roller feeder with operation via foot switch

and positioning by the single-turn

Feeder option:

Roller feeder with operation via foot switch

and positioning by the single-turn

Equipment option:

• Low point stops

• Fixed or adjustable die holder

• Die clamping device manual or pneumatic

• Increased daylight

• Automatic cutting board shifting device

• Cutting area illumination

Equipment option:

• Fixed or adjustable die holder

• Die clamping device manual or pneumatic

• Automatic cutting board shifting device

• Cutting area illumination

1800 mm x 1050 mm - 1000 kN

Image of machine type 5300

7

Image of machine type 5320

Benefit:Various table sizes can be combined

Hydraulic Cutting Machine Type 6005 SA

Technical data:

Dimension / Cutting force: 2200 mm x 850 mm - 800 kN

2200 mm x 1050 mm - 1250 kN

2200 mm x 1250 mm - 1250 kN

Hydraulic Cutting Machine Type 5050

Technical data:

Cutting width: 1800, 2200 or 2500 mm

Cutting depth: 1050, 1250, 1600 or 2100 mm

Cutting force: 1250, 1600, 2000 or 2400 kN

for the Leather- and Textile- IndustryCutting Machineswith stationary bridgeLarge Area Cutting Machines

Image of machine type 6005 SA

1250, 1600, 2000 or 2400 kN

Image of machine type 5050

Equipment option: • Fixed or adjustable die holder• Die clamping device manual or pneumatic• Increased daylight • Automatic cutting board shifting device • Die changing rails

Equipment option: • Fixed or adjustable die holder• Die clamping device manual or pneumatic• Increased daylight • Automatic cutting board shifting device • Die changing rails• Steel cutting plate

Feeder option:• Automatic sliding table• Roller feeder• Clamping beam feeder• Cutting belt unit• Belt conveyor• Suction belt unit

Feeder option:• Automatic sliding table• Roller feeder• Clamping beam feeder• Cutting belt unit• Belt conveyor• Suction belt unit

8

Hydraulic Cutting Machine Type 6005BA

Technical data:

Dimension / Cutting force: 1600 mm x 850 mm - 800 kN

2060 mm x 1050 mm - 1250 kN

2060 mm x 1250 mm - 1250 kN

2200 mm x 1100 mm - 1000 kN

Equipment option: • Fixed or adjustable die holder• Die clamping device manual or pneumatic• Automatic cutting board shifting device• Steel cutting plate• Cutting area illumination

Feed units optional

Hydraulic Cutting Machine Type 6050

Technical data:

Dimension / Cutting force: 1800 mm x 1250 mm - 1600 kN

1800 mm x 1250 mm - 2000 kN

1800 mm x 1250 mm - 2400 kN

2200 mm x 1250 mm - 2000 kN

2200 mm x 1250 mm - 2400 kN

Equipment option: • Fixed or adjustable die holder• Die clamping device manual or pneumatic• Automatic cutting board shifting device• Steel cutting plate• Cutting area illumination

Feed units optional

2200 mm x 1100 mm - 1000 kN

Image of machine type 6005 BA

9

Image of machine type 6050

with receding beamLarge Area Cutting Machines

Roller Cutting Machine Type 7320This machine is for cutting either half or whole leather hides. It uses the sandwich-method and is suited for higher batch

sizes. It is equipped with Siemens S7 PLC control, incl. touch panel. Additionally, there is separate blade height adjust-

ment for each table.

Technical data:

Roller width: 1400 mm, 2600 mm

Table dimension: 1300 x 3000 mm or 2500 x 3000 mm

Building: 2, 4, 6, 8 or 10 preparation tables

Image of machine type 7320Image of machine type 7320

for the Leather- and Textile- IndustryCutting Machines

Equipment option:• Additional vacuum pump• Die storage rack

Features:

• Roller cutting machine

• Transport tables with friction wheels

• Cutting Cover board

• Vacuum lifting devices for sandwich board

• Preparation tables in solid welded steel construction

Depending on plate size and arrangement of tables:

• Pneumatic transfer devices for preparation tables

• Pneumatic guide bars

10

https://schoen-sandt.com/fileadmin/user_upload/Bilder/Produkte/Automatischer_Schiebetisch_Typ_2084.jpg https://schoen-

sandt.com/fileadmin/user_upload/Bilder/Produkte/Automatischer_Schiebetisch_Typ_2084.jpg

Automatic sliding tables

Roller feed separately

Clamp feeder

Peripherie

Auto transport and delivery systems

11

Roller feed for attachment to machine

Clamp feeder with transport or cutting belt

Contact Europe, USA and Asia

More Information

www.schoen-sandt.deinfo@schoen-sandt.de

Germany Hungary

Jürgen SchneiderManaging Director e-mail: j.schneider@schoen-sandt.dephone: +49 6331 - 713 - 100

Bernd HeitzmannManaging Director e-mail:bernd.heitzmann@schoen-sandt.dephone: +49 6331 - 713 - 150

www.schoen-sandt.de

Gabor SchmidtManaging Director e-mail: sg@schoen-sandt.huphone: +36 36 511 615

Bernd HeitzmannManaging Director e-mail:bernd.heitzmann@schoen-sandt.dephone: +36 36 511 644

www.schoen-sandt.hu

USA

Ed Skoniecki President

American & Schoen Machinery Companye-mail: eskoniecki@asm-schoen.comphone: +1-978-524-0168

Jerry HughesVice PresidentAmerican & Schoen Machinery Companye-mail: jhughes@asm-schoen.comphone: +1-573-546-7802

www.asm-schoen.com

Asia

Bernd JueckmannRegional Director, Asiene-mail: b.jueckmann@schoen-sandt.demobile Manila I (main) + 63 906 290 0958mobile Manila II + 63 917 853 6633home Office + 63 280 721 84

12