CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS

1
CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS 1. Prepare customized temporary abutment to meet your desired emergence profile. 2. The desired emergence profile for the implant will be achieved with the provisional. 3. Now that the emergence profile has been developed, you will now want to capture this same emergence profile when taking a final impression. 4. A stock impression post must be customized to capture soft tissue emergence profile. 13. Unscrew temporary post and trim excess material. Fill any voids, polish and take impression. 14. Notice the matching emergence profile of the temporary abutment and impression post. 15. Screw the custom impression post into the implant and take impression. Once impression material sets, unscrew the impression post and remove impression. The master cast is now ready to be fabricated after the lab analog has been placed into the impression. 5. Connect custom temporary abut- ment and provisional to implant analog. 7. Apply bite registration material to the abutment and analog to ensure a complete impression is taken. 8. Embed the temporary abutment, provisional and implant analog into the bite registration material. Once material sets, remove provisional and temporary abutment. 6. Fill small vessel with bite registration material, such as Blu-Mousse ® . 9. Notice the transfer of the shape of the temporary into the material. Mark the buccal position for orientation. 11. Fill the impression with cold cure or auto-polymerizing rapid cure temporary material. 12. Let temporary material cure. 10. Connect impression coping to implant analog in bite registration material. 025.4202 RC Impression post, with guide screw 024.4370 RC Temporary meso abutment D 7.0 mm 025.4101 RC Implant analog 025.2202 NC Impression post, with guide screw 024.2370 NC Temporary meso abutment D 5.0 mm 025.2101 NC Implant analog RC COMPONENTS © Straumann USA, LLC 2009 Straumann products are CE marked USLIT 269 2/09 Straumann ® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved. Blu-Mousse ® is a registered trademark of Parkell Products, Inc. All rights reserved. NC COMPONENTS Photos courtesy of: Samuel Zfaz, DDS – Fred Norkin, DMD – Jeffrey Ganeles, DMD

Transcript of CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS

CUSTOMIZED IMPRESSION POST FOR BONE LEVEL IMPLANTS

1. Prepare customized temporary abutment to meet your desired emergence profile.

2. The desired emergence profile for the implant will be achieved with the provisional.

3. Now that the emergence profile has been developed, you will now want to capture this same emergence profile when taking a final impression.

4. A stock impression post must be customized to capture soft tissue emergence profile.

13. Unscrew temporary post and trim excess material. Fill any voids, polish and take impression.

14. Notice the matching emergence profile of the temporary abutment and impression post.

15. Screw the custom impression post into the implant and take impression. Once impression material sets, unscrew the impression post and remove impression.The master cast is now ready to be fabricated after the lab analog has been placed into the impression.

5. Connect custom temporary abut- ment and provisional to implant analog.

7. Apply bite registration material to the abutment and analog to ensure a complete impression is taken.

8. Embed the temporary abutment, provisional and implant analog into the bite registration material. Once material sets, remove provisional and temporary abutment.

6. Fill small vessel with bite registration material, such as Blu-Mousse®.

9. Notice the transfer of the shape of the temporary into the material. Mark the buccal position for orientation.

11. Fill the impression with cold cure or auto-polymerizing rapid cure temporary material.

12. Let temporary material cure.10. Connect impression coping to implant analog in bite registration material.

025.4202 RC Impression post, with guide screw

024.4370 RC Temporary meso abutment D 7.0 mm

025.4101 RC Implant analog

025.2202 NC Impression post, with guide screw

024.2370 NC Temporary meso abutment D 5.0 mm

025.2101 NC Implant analog

RC COMPONENTS

© S

traum

ann

USA,

LLC

200

9

Stra

uman

n pr

oduc

ts ar

e C

E m

arke

d

USL

IT 26

9

2/0

9 St

raum

ann®

is a

regi

stere

d tra

dem

ark

of S

traum

ann

Hol

ding

AG

, or i

ts af

filia

tes.

All

right

s re

serv

ed.

Blu-M

ouss

e® is

a re

giste

red

trade

mar

k of

Par

kell

Prod

ucts,

Inc.

All

right

s re

serv

ed.

NC COMPONENTS

Photos courtesy of: Samuel Zfaz, DDS – Fred Norkin, DMD – Jeffrey Ganeles, DMD