CUSTOMIZATION GUIDE... · 2019. 2. 8. · , you’ll see manufacturers bragging about how their...
Transcript of CUSTOMIZATION GUIDE... · 2019. 2. 8. · , you’ll see manufacturers bragging about how their...
// CUSTOMIZATION GUIDE
CHOOSE YOUR PATH TO A COMPLETE AUDIO SYSTEM
OR
ALL-IN-ONE
PGs. 3-4 PGs. 5-9
BUILD YOUR OWN
AUDIO CUSTOMIZATION GUIDE 2VERSION 1.0 // APRIL 2017
Convenient, stand alone Sound Bars or Audio Roof systems with simple, straight ahead installation. Connect to a device via Bluetooth®, add power, and start enjoying
your favorite tunes.
Design your own setup with the scalability and capability you need for the sound quality and power you want.
Determine the right mix of audio components and select a convenient audio system package with everything you
need to install it on your RZR®.
When you research audio solutions for your Polaris RZR®, you’ll see manufacturers bragging about how their audio equipment is “Marine Grade”. Or worse yet, you’ll discover that they are repackaged components built for
automotive applications. Polaris®, combined with MB Quart®, engineers off-road grade audio equipment that’s proven in the harshest conditions. Rain, snow,
mud, heat, cold, dust – any place your RZR® excels, so will your audio.
SANDSNOW
RAINMUD
LOUD LOUDER LOUDESTLOUD LOUDER LOUDEST
SOUND BAR 4 by MB QUART®
• Two mid-range/mid-bass speaker and two dedicated tweeters
• Integrated, self-powered amplifier for easy installation
• Waterproof speakers and controls
• Large, easy to use external controls
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install Sound Bar on the front ROPS using included mounts per installation instructions.
• Run the wiring harness down the inside of the ROPS A-Pillar to the accessory busbar.
• Connect wiring harness to the accessory busbar; connect the power connector on the Sound Bar to the power connector on the wiring harness.
If you are looking for a complete solution with minimal install and wiring, an Audio Roof or Sound Bar is your choice. Simply install the item, supply power and you are ready to go. Each Audio Roof or Sound Bar contains everything you need to enjoy your audio system. Connect your preferred audio source via an AUX input or Bluetooth®.
SOUND BAR 8 by MB QUART®
• Six mid-range/mid-bass speaker and two dedicated tweeters
• Integrated, self-powered amplifier for easy installation
• Waterproof speakers and controls
• Large, easy to use external controls
ALL-IN-ONE SYSTEMS
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install Sound Bar on the front ROPS using included mounts.
• Run the wiring harness down the inside of the ROPS A-Pillar to the accessory busbar.
• Connect wiring harness to the accessory busbar, and then connect the power connector on the Sound Bar to the power connector on the wiring harness.
ALL-IN-ONE SOUND BARS
Busbar Harness required. See page 10 Busbar Harness required. See page 10
PRODUCT # PRODUCT NAME US MSRP CAN MSRP
2881230 Sound Bar 4 $37999 $49499
2882280 Sound Bar Harness $6999 $9499
TOTAL $44998 $58998
PRODUCT # PRODUCT NAME US MSRP CAN MSRP
2881465 Sound Bar 8 $64999 $83999
2882280 Sound Bar Harness $6999 $9499
TOTAL $71998 $93498
AUDIO CUSTOMIZATION GUIDE 3VERSION 1.0 // APRIL 2017
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2882064 S4 Audio Roof $99999 $1,28999
TOTAL $99999 $1,28999
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2882066 S10-L Extreme Audio Roof $1,99999 $2,57999
TOTAL $1,99999 $2,57999
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2882065 S8-L Extreme Audio Roof $1,49999 $1,93499
TOTAL $1,44999 $1,93499
S10-L EXTREME AUDIO ROOF • Two 6" x 9" coaxial speakers, plus four 6.5" component speakers with
mids & tweeters with 4-channel 400-watt amp
• Built-in 200-watt, LED push-button stereo head unit
• Pro Armor® Dual Row 30" Combo
• Bluetooth®, AM/FM radio and AUX input
2-SEAT MODELS ONLY | XP TURBO EPS MY 16-17, XP 1000 EPS MY 14-17,
1000 S EPS MY 16-17, 900 MY 15-17
S4 AUDIO ROOF • Four 6.5" coaxial speakers
• Built-in 160-watt, LED push-button stereo head unit
• Bluetooth, AM/FM radio and AUX input
2-SEAT MODELS ONLY | XP TURBO EPS MY 16-17, XP 1000 EPS MY 14-17,
1000 S EPS MY 16-17, 900 MY 15-17
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• The wiring harness is integrated into the Roof. Follow instructions for installation and run wiring harness down the inside of the ROPS A-Pillar to the accessory busbar.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• The wiring harness is integrated into the Roof. Follow instructions for installation and run wiring harness down the inside of the ROPS A-Pillar to the accessory busbar.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• The wiring harness is integrated into the Roof. Follow itnstructions for installation and run wiring harness down the inside of the ROPS A-Pillar to the accessory busbar.
S8-L EXTREME AUDIO ROOF • Four 6.5" component speakers with mids & tweeters with 4-channel
400-watt amp
• Built-in 200-watt, LED push-button stereo head unit
• Pro Armor® Single Row 33" Combo
• Bluetooth®, AM/FM radio and AUX input
2-SEAT MODELS ONLY | XP TURBO EPS MY 16-17, XP 1000 EPS MY 14-17,
1000 S EPS MY 16-17, 900 MY 15-17
ALL-IN-ONE AUDIO ROOFSAn audio roof serves two purposes. First, it offers protection from the elements. Second, it is an excellent all-in-one solution for your audio needs. Includes the head unit, amplifier and speakers – all sealed from the elements. Choose from two options that include Pro Armor® light bars, offering superior durability and ultimate performance.
Busbar Harness required. See page 10
Busbar Harness required. See page 10
Busbar Harness required. See page 10
AUDIO CUSTOMIZATION GUIDE 4VERSION 1.0 // APRIL 2017
This is the heart of your audio system.
The head unit controls all components
and determines the capability and the
make up of your system.
Pitch perfect power that bumps from your
doors, self-powered audio pods complete
with accent lighting, or for full-on audio
immersion with both. You have options
depending on the choice of head unit.
Select the kit with your head unit and
speakers of choice and you’ve got
everything you need to install your
MB Quart® audio solution into your RZR®.
Polaris® and MB Quart® bring powerful, scalable, crystal clear audio to your RZR® with a collection of rugged, off-road grade audio components. Build the system of your choosing with convenient system kits that include all the required components needed for installation. No matter if your looking for a wild or mild audio system, it’s as easy as, choosing a kit with a head unit and speakers that deliver for you.
BUILD YOUR OWN
HEAD UNITSPG. 6
SPEAKERSPG. 6
SYSTEM KITSPGs. 7-8
DETERMINE YOUR AUDIO COMPONENTS CHOOSE A KIT
AUDIO CUSTOMIZATION GUIDE 5VERSION 1.0 // APRIL 2017
BLUETOOTH®, APPLE® CONTROL, AM/FM DASH STEREO BY MB QUART® • A seamlessly integrated source unit to control all your audio needs
• Waterproof
• Easy installation and great fit and finish
• Remote mounted USB / 3.5mm plug for external device connection
BLUETOOTH® AUDIO REMOTE BY MB QUART®
• Keep your phone stowed away and play your favorite tunes through your RZR®
• Bluetooth® technology allows you to play music through speakers of choice
• Mount anywhere and control music with easy to use push-button pad
DOOR SPEAKERS
• High performance 6.5" component speakers with 0.75" titanium dome tweeters
• Works with Polaris® lower doors or Polaris® aluminum doors
• Requires Audio Amplifier
EXTREME AUDIO PODS
• Two 8" coaxial speakers with 1" titanium tweeters in weatherproof enclosures
• Self-amplified 200-watt per speaker output
AUDIO AMPLIFIER
• This amplifier is a TDA-based full range class D amplifier with fixed connections for power, ground and turn-on and Delphi connectors for speaker.
EXTREME AUDIO POD MOUNTING BAR
• Provides additional mounting locations for RZR® 900 MY 15-17
BUILD YOUR OWN HEAD UNITS
BUILD YOUR OWN SPEAKERS
AUDIO CUSTOMIZATION GUIDE 6VERSION 1.0 // APRIL 2017
SYSTEM KITS COMING SOON
AUDIO CUSTOMIZATION GUIDE 7VERSION 1.0 // APRIL 2017
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
BLUETOOTH®, APPLE® CONTROL, AM/FM DASH STEREO by MB QUART® with DOOR SPEAKERS
BLUETOOTH®, APPLE® CONTROL, AM/FM DASH STEREO by MB QUART® with EXTREME AUDIO PODS
BLUETOOTH®, APPLE® CONTROL, AM/FM DASH STEREO by MB QUART® with 2 SETS OF EXTREME AUDIO PODS
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Door Speakers, 2) Audio Amp, 3) Bluetooth® Dash Radio per installation instructions.
• The Door Speakers include wires that connect directly to the Audio Amp. Connect power to the Audio Amp via the accessory busbar with included wiring.
• NOTE: if the machine does not have a busbar harness, install the busbar harness in conjunction with the Door Speaker wiring, see page 10 for busbar harness information.
• Connect white (JST) connectors from the Audio Amp and Bluetooth® Dash Radio together, and the blue “Remote On” wires together.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Extreme Audio Pods, 2) Rear Audio Harness, 3) Bluetooth® Dash Radio per installation instructions.
• Extreme Audio Pods require rear audio harness. Connect pods to harness and run power supply and audio connection wiring to the front of the vehicle through the ROPS and down the inside of the A-Pillar. Connect Extreme Audio Pods power wiring to existing vehicle accessory busbar.
• Connect white (JST) connectors from the Rear Audio Harness and Dash Radio together, and the blue “Remote On” wires together.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Extreme Audio Pods [4 total], 2) Line-Out Harnesses [2], 3) Ultimate Harness, 3) Bluetooth® Dash Radio per installation instructions.
• Run power and audio wiring for the Ultimate Harness per the installation manual, and connect power to the existing vehicle accessory busbar.
• Connect the blue “Remote On” wires from the ultimate harness and the Dash Radio together.
• Chain together the two Line-Out Audio Harnesses so you can reach the rear of the vehicle, connecting the female adapter to the Dash Radio using the male adapter of the Line-Out Audio Harnesses.
• Once at the rear of the vehicle, connect the female adapter of the Line-Out Audio Harness to the male adapter of the Audio Y-Harness.
• Extreme Audio Pods require Ultimate Audio Harness. Connect pods to harness and, run power supply and audio connection wiring to the front of the vehicle through the ROPS and down the inside of the A-Pillar. Connect Extreme Audio Pods power wiring to existing vehicle accessory busbar.
• Connect the adapter from the Ultimate Harness to the connector on the Extreme Audio Pods and then use the Y Audio harness to the Audio Connectors on the Extreme Audio Pods.
BUILD YOUR OWN BLUETOOTH®, APPLE® CONTROL, AM/FM DASH STEREO BY MB QUART®
SYSTEM KITS
Busbar Harness required. See page 10
Busbar Harness required. See page 10
Busbar Harness required. See page 10
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881988Bluetooth®, Apple® Control, AM/FM
Dash Stereo by MB Quart® $39999 $54999
2882122 Audio Amp $15999 $20999
2881989 Door Speakers $39999 $51999
TOTAL $95997 $1,27999
ALL XP 1000 EPS MY 14-17, ALL XP TURBO EPS MY 16-17, 1000 S EPS MY 16-17, ALL 900 MY 15-17
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881988Bluetooth®, Apple® Control, AM/FM
Dash Stereo by MB Quart® $39999 $54999
2881227 Extreme Audio Pods $79999 $1,03499
2882167 Rear Audio Harness $6999 $9499
TOTAL $1,26999 $1,67997
ALL XP 1000 EPS MY 14-17, ALL XP TURBO EPS MY 16-17, 1000 S EPS MY 16-17, ALL 900 MY 15-17
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881988Bluetooth®, Apple® Control, AM/
FM Dash Stereo by MB Quart® $39999 $54999
2881227 Extreme Audio Pods (2) $79999 each $1,03499 each
2881617 Ultimate Harness $11999 $15599
2881652 Line-Out Audio Harness (2) $999 each $1499 each
2881651 Y-Audio Harness $1999 $2999
TOTAL $2,15993 $2,83593
ONLY 2-SEAT MODELS
XP 1000 EPS MY 14-17, XP TURBO EPS MY 16-17, 1000 S EPS MY 16-17, 900 MY 15-17
AUDIO CUSTOMIZATION GUIDE 8VERSION 1.0 // APRIL 2017
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
LOUD LOUDER LOUDEST
BLUETOOTH® AUDIO REMOTE by MB QUART® with DOOR SPEAKERS
BLUETOOTH® AUDIO REMOTE by MB QUART® with EXTREME AUDIO PODS
BLUETOOTH® AUDIO REMOTE by MB QUART® with 2 SETS OF EXTREME AUDIO PODS
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Door Speakers, 2) Audio Amp, 3) Ride Bluetooth® Audio Remote per installation instructions.
• Connect the Bluetooth® Audio Remote to the existing vehicle accessory busbar.
• The Door Speakers include wires that connect directly to the Audio Amp. Connect power to the Audio Amp via the accessory busbar with included wiring.
• NOTE: if the machine does not have a busbar harness, install the busbar harness in conjunction with the Door Speaker wiring, see page 10 for busbar harness information.
• Connect white (JST) connectors from the Audio Amp and Bluetooth® Audio Remote together, and the blue “Remote On” wires together.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Extreme Audio Pods, 2) Rear Audio Harness, 3) Ride Bluetooth® Audio Remote per installation instructions.
• Extreme Audio Pods require rear audio harness. Connect pods to harness and run power supply and audio connection wiring to the front of the vehicle through the ROPS and down the inside of the A-Pillar. Connect Extreme Audio Pods power wiring to existing vehicle accessory busbar.
• Connect white (JST) connectors from the Rear Audio Harness and Bluetooth Remote Control together, and the blue “Remote On” wires together.
I N S T A L L A T I O N O V E R V I E W
• If vehicle does not currently have a busbar harness, install appropriate busbar harness from the battery to the accessory busbar, see page 10.
• Install in the following order: 1) Extreme Audio Pods [4 total], 2) Line-Out Audio Harnesses [2], 3) Ultimate Harness, 3) Bluetooth® Audio Remote per installation instructions.
• Run power and audio wiring for the Ultimate Harness through the ROPS and down the inside of the A-Pillar, and connect power to the existing vehicle accessory busbar.
• Connect the blue “Remote On” wires from the Ultimate Harness and the Bluetooth® Audio Remote together.
• Chain together the two Line-Out Audio Harnesses so you can reach the rear of the vehicle, connecting the female adapter to the Bluetooth Audio Remote using the male adapter of the Line-Out Audio Harnesses.
• Once at the rear of the vehicle, connect the female adapter of the Line-Out Audio Harness to the male adapter of the Audio Y-Harness.
• Extreme Audio Pods require Ultimate Audio Harness. Connect pods to harness and, run power supply and audio connection wiring to the front of the vehicle through the ROPS and down the inside of the A-Pillar. Connect Extreme Audio Pods power wiring to existing vehicle accessory busbar.
• Connect the adapter from the Ultimate Harness to the connector on the Extreme Audio Pods and then use the Audio Y-harness to connect the audio connectors to the Extreme Audio Pods.
BUILD YOUR OWN BLUETOOTH® AUDIO REMOTE BY MB QUART®
SYSTEM KITS
Busbar Harness required. See page 10
Busbar Harness required. See page 10
Busbar Harness required. See page 10
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881470Bluetooth® Audio Remote by
MB Quart®$9999 $12999
2882122 Audio Amp $15999 $20999
2881989 Door Speakers $39999 $51999
TOTAL $65997 $85997
ALL XP 1000 EPS MY 14-17, ALL XP TURBO EPS MY 16-17, 1000 S EPS MY 16-17, ALL 900 MY 15-17
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881470Bluetooth® Audio Remote by
MB Quart®$9999 $12999
2881227 Extreme Audio Pods $79999 $1,03499
2882167 Rear Audio Harness $6999 $9499
TOTAL $96997 $1,25997
ALL RZR® MODELS
PRODUCT NUMBER PRODUCT NAME US MSRP CAN MSRP
2881470Bluetooth® Audio Remote by
MB Quart®$9999 $12999
2881227 Extreme Audio Pods (2) $79999 each $1,03499 each
2881617 Ultimate Harness $11999 $15599
2881652 Line-Out Audio Harness (2) $999 each $1499 each
2881651 Y-Audio Harness $1999 $2999
TOTAL $1,85993 $2,41593
ALL 2-SEAT RZR® MODELS
AUDIO CUSTOMIZATION GUIDE 9VERSION 1.0 // APRIL 2017
Brings battery power to the accessory busbar for easy accessory installation.
LINE-OUT AUDIO HARNESS
• JST (audio signal) extension
• Harness transfers audio signal from source unit to audio component
• *Important* audio harness only - no power or remote-on connection
SOUND BAR HARNESS
• Power connection for Sound Bars. Used to connect Sound Bar to accessory busbar for power.
Y-AUDIO HARNESS
• Y-Harness splits the audio signal to allow for additional audio components to be added
ULTIMATE HARNESS
• Allows for multiple audio components (3) as well as LED lights (2) to be connected using one harness
• Runs through the ROPS so the wires do not obstruct your view or additional accessories
REAR AUDIO HARNESS
• Harness designed to connect audio components mounted on the rear of the vehicle. Contains power connection as well as audio (JST and remote on) connections. Recommended for audio pods
• Works on 4-seat
BUSBAR & AUDIO HARNESSES
Connect power and signals to your audio system components. Depending on your vehicle model, you may need to add a busbar harness and the specific audio harnesses to your vehicle.
BUSBAR HARNESSES
AUDIO HARNESSES
© 2017 Polaris Industries, Inc. Prices and availability are subject to change at any moment. MB Quart® is a registered trademark of Maxxsonics USA Inc. Bluetooth® is a registered trademark of Bluetooth Sig, Inc. All rights reserved.
VEHICLE FITMENT PRODUCT NUMBER US MSRP CAN MSRP
XP TURBO MY16-17, XP 1000 MY16-17, S 1000 MY16-17, 900/S 900/900 XC MY16-17 2881551 $4999 $6999
XP 1000 MY14-15, 900/S 900/900 XC MY15 2882862 $5999 $8399
XP 4 TURBO MY16-17, XP 4 1000 MY16-17, 4 900 MY16-17 2881646 $5999 $8399
XP 4 1000 MY14-15, 4 900 MY15 2882861 $5999 $8399
2-S
EA
T4
-SE
AT
AUDIO CUSTOMIZATION GUIDE 10VERSION 1.0 // APRIL 2017