CustomerSurface Equip 4

8/10/2019 CustomerSurface Equip 4

1/19

HALLIBURTON

PRESSURE CONTROLSURFACE EQUIPMENT

All the components we are about to see are

necessary for Halliburton or any Slickline service

company to perform Slickline work efficiently

and safely

Pressure equipment is also there to provide us a

means of inserting or removing Subsurface Flow

Control Devices from the wellbore.

So with those few words, Starting from the topof our Rig up lets begin.


2/19

HALLIBURTON

Manual Stuffing Box

Lubricator Stack

The Entry/Exit point of

the slickline

Designed for heavy duty

operations with

Emphasis on SAFETY,with a 16 sheave to

allow the wire to rotate

180 into the well.

Top packing gland

Stuffing box packing

Bottom packing

gland

Blow-out preventer

Blow-out preventer

retainer
http://localhost/var/www/apps/Abu%20Dhabi/day1/Stuffing%20box.pps


3/19

HALLIBURTON

Hydraulic Stuffing Box

Lubricator Stack

The Entry/Exit point of

the slickline

Designed for heavy duty

operations with

Emphasis on SAFETY,with a 16 sheave to

allow the wire to rotate

180 into the well.

Top packing gland

Stuffing box packing

Bottom packing

gland

Blow-out preventer

Blow-out preventer

retainer

Lets look at this in more

Detail


4/19

HALLIBURTON

Hydraulic Packing Nut

Lubricator Stack

Piston Brass/Carbon

Steel

Return Spring

Hydraulic Oil

feed/return from

pump


5/19

HALLIBURTON

Lower Packing Gland

Grease Packoff

Lubricator Stack

emove the bottom packing

gland and insert grease

packoff, remove the

Blowout preventer as well


6/19

HALLIBURTON

Slickline Grease

Packoff

Lubricator Stack

Inserted directly below

Stuffing box designed for

High temp/High pressure

wells

Grease injection

point

Check valve

Return line


7/19

HALLIBURTON

Grease Injection head

Lubricator Stack

Grease injection head is used when

you have to rig up Braided line.

The grease is pumped from the

injection point above the last flow

tube and take returns from the top.

You also have a Pack Off situated

at the top, this is used when theline is stationery to preserve grease

and pumped up to a maximum of

3000 psi.

The sheave is optional, you maywish to hang from a tugger on the

rig floor.


8/19

HALLIBURTON

Liquid Injection

Chamber

Lubricator Stack

Optional piece of

equipment directly belowthe stuffing box,

Allows you the option of

pumping Lubricants,

Inhibitors or Chemicals

(Methanol, Glycol e.t.c.)


9/19

HALLIBURTON

Liquid Injection

Chamber

Injection point

Felt washers


10/19

HALLIBURTON

Tool Catcher

Lubricator Stack

Used when Braided line

has been rigged up, serves

in 2 purposes

Firstly, it allows you to

rig up the toolstring andbraided line safely.

Secondly, it stops the

toolstring from falling into

the well when the ropesocket hits the bottom of

the Greasehead


11/19

HALLIBURTON

Upper/ Middle

Lubricator Sections

Lubricator Stack

The Upper sections are there too

take up the length of the

complete toolstring and allow

you to close the Wireline valve

if required.

The top most section has the

same quick union connection asthe Stuffing box or Grease head.


12/19

HALLIBURTON

Lower Lubricator

Section

Lubricator Stack

The lower section has to have

an ID capable of taking thelargest Subsurface flow

control device to be run in

the Well

It also incorporates a needle

valve to allow you to bleeddown after you have

performed the task


13/19

HALLIBURTON

Manual Wireline Valve

Lubricator Stack

Used directly above the tree connection

normally on small Rig ups for easy

access to Handles


14/19

HALLIBURTON

Hydraulic Wireline

Valve

Lubricator Stack


15/19

HALLIBURTON

Manual/Hydraulic

Wireline Valve Rams


16/19

HALLIBURTON

Manual/Hydraulic

Wireline Valve Rams


17/19

HALLIBURTON

Tool Trap

Lubricator Stack

Used with any type of wireline

(Slickline or Braided) to eliminatethe possibility of dropping the

toolstring down the well


18/19

HALLIBURTON

Pump-In Sub

Lubricator Stack

Used to allow youto kill or bleed

down the well

pressure.

Normally installed

above the Swab

valve to allow you

to bleed down the

lubricator.


19/19

CustomerSurface Equip 4

Documents

Transcript of CustomerSurface Equip 4