LED Control SolutionsSmooth, flicker-free dimming for every application

lutron.comLutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299

Customer AssistanceOnline: lutron.com/help Email: support@lutron.com Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support

Lutron, C·L, Nova T *, Maestro, Diva, Skylark Contour, Skylark, Ariadni, and Caséta are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. GRAFIK T is a trademark of Lutron Electronics Co.

© 10/2017 Lutron Electronics Co., Inc. I P/N 367-2732 REV B

2 | Lutron

Dimmers

3 C•L dimmers

9 Reverse phase dimmers

11 Phase select dimmers

13 Dimmer capabilities

15 0–10 V dimmers

Bulbs & Sensors

21 Testing LED bulb Performance

25 In-wall sensors

Table of Contents

What sets Lutron apart from the restThis guide covers our extensive line of reliable LED controls and the

features that make them stand out from the rest. Whether your job

requires a dimmer, sensor, or both, you can count on the Lutron

difference to give your customers the best LED control experience.

THE LUTRON DIFFERENCE

Satin Colors**

Hot (HT)

Merlot (MR)

Plum (PL)

Turquoise (TQ)

Sea Glass (SG)

Taupe (TP)

Eggshell (ES)

Biscuit (BI)

Snow (SW)

Palladium (PD)

Midnight (MN)

Sienna (SI)

Terracotta (TC)

Greenbriar (GB)

Bluestone (BG)

Mocha Stone (MS)

Goldstone (GS)

Desert Stone (DS)

Stone (ST)

Limestone (LS)

Gloss Colors**

White (WH)†

Ivory (IV) †

Almond (AL) †

Light Almond (LA)

Gray (GR)

Brown (BR)

Black (BL) †

Architectural Metals (GRAFIK T only)

Satin Brass (SB)

Bright Brass (BB)

Bright Chrome (BC)

Satin Chrome (SC)

Satin Nickel (SN)

Bright Nickel (BN)

Architectural Matte (GRAFIK T and Nova T* only)

White (WH)

Beige (BE)

Ivory (IV)

Almond (AL)

Light Almond (LA)

Gray (GR)

Taupe (TP)

Sienna (SI)

Brown (BR)

Black (BL)

Glass(GRAFIK T only)

Clear Glass (CWH)

* Not available for GRAFIK T** For full availability by product refer to

our catalog† Available colors for Caséta Wireless

2 | Lutron

D I M M E R S

2 | Lutron

C•L dimmers are forward phase dimmers specifically designed for controlling dimmable LEDs, incandescent, and halogen bulbs. They’re the result of our commitment to providing the best LED dimming experience to our customers. Part of that commitment also includes working with bulb manufacturers to find and test bulbs that work well with C•L dimmers through our LED Control Center of Excellence (see page 21 for more information).

C•L Dimmers

3 | Lutron

4 | Lutron

THE LUTRON DIFFERENCE

150 W of LED/600 W of incandescent / halogen

A standard LED is 9 W. With a 150 W dimmer, you can dim 16 bulbs on a single dimmer. Most homes have 22 switches and about 50 to 60 bulbs, so you probably won’t need more than 150 W of LED dimming on any one circuit. (If you do, Lutron has a 250 W C•L model that can dim 27 bulbs at 9 W.)

=

1 – 150 W C•L DIMMER

=

1 – 250 W C•L DIMMER

LED CFL Incandescent / Halogen

C•L dimmers can dim these loads

Works with these bulb types:

Dimmable LEDs, dimmable CFLs, incandescent, and

halogen bulbs. You can also mix bulb types with C•L

dimmers — something you can’t do with other dimmers.

5 | Lutron

Eliminate dimmer interaction

This is a common problem that occurs in a home with multiple dimmers. When you adjust one of the dimmers, the lights in the other room(s) with dimmers flicker.

C•L Dimmers

Non C•L dimmersLights in dining room can flicker when dimmer in kitchen is adjusted

XC•L dimmersAlleviate dimmer interaction for smooth, flicker-free dimming ü

THE LUTRON DIFFERENCE

6 | Lutron

With C•L dimmers, there is no neutral required

Easily set the low-end trim

Optimizing the dimmer’s low end is easy. Simply adjust the lever on the side or through button-press programming (for digital dimmers).

Work with all wire temperature ratingsC • L dimmers don’t require 75° C wire to operate,

unlike some other dimmers.

50%Homes built before 1980

Temp rating: 60° C – 75° C

50%Homes built after 1980

Temp rating: 75° C

X

THE LUTRON DIFFERENCE

7 | Lutron

Diva Maestro Skylark Contour Skylark

150 W 250 W 150 W 150 W 150 W 150 W

Model numberDVCL-153P DVCL-253P MACL-153M CTCL-153P CTCL-150 SCL-153P

DVSCCL-153P DVSCCL-253P

Voltage 120 V 120 V 120 V 120 V 120 V 120 V

Single pole • • • • • •

3-way • • • • •

Multi-location* •

600 W inc / halogen150 W LED / CFL

• • • • •

600 W inc / halogen 250 W LED / CFL

•

Prevents dimmer interaction

• • • • • •

Low-end trim • • • • • •

Mixed loads • • • • • •

C•L Dimmers

Po

le/

Wir

ing

Max

imum

C

apac

ity

*Dim from up to 10 locations

8 | Lutron

Ariadni Nova T* GRAFIK T Maestro Sensor

150 W 250 W 250 W 150 W 250 W 150 W

Model numberAYCL-153P AYCL-253P NTCL-250 GT-150 GT-250M MSCL-OP153M

Voltage 120 V 120 V 120 V 120 V 120 V 120 V

Single pole • • • • • •

3-way • • • •

Multi-location* • •

600 W inc / halogen150 W LED / CFL

• • •

600 W inc / halogen 250 W LED / CFL*

• • •

Prevents dimmer interaction

• • • • • •

Low-end trim • • • • • •

Mixed loads • • • • • •

Po

le/

Wir

ing

Max

imum

C

apac

ity

Reverse phase dimmers control dimmable LEDs and CFLs, as well as

incandescent, halogen, and ELV loads.

Reverse Phase Dimmers

Reverse Phase Control9 | Lutron

10 | Lutron

Nova T* Diva Skylark Contour

250 W 250 W 250 W

Model numberNTRP-250 DVRP-253P CTRP-253P

DVSCRP-253P

Voltage 120 V 120 V 120 V

Single pole • • •

3-way • •

250 W LED / CFL 500 W Inc./Hal./ELV

• • •

Po

le/

Wir

ing

Max

imum

C

apac

ity

Reverse phase dimmers require a neutral and do not have low-end trim.

CanTrackLED CFL

Works with these loads

Incandescent / Halogen

Electronic low-voltage

You can program phase select dimmers to work in either forward or reverse phase,

for optimal performance. They were specifically designed for the pro and control

dimmable LEDs and CFLs, as well as incandescent, halogen, and ELV loads.

Phase Select Dimmers

11 | Lutron

12 | Lutron

GRAFIK T Caséta

250 W 250 W

Model number GT-5NEM PD-5NE

Voltage 120 V 120 V

Single pole • •

3-way • •*

Multi-location • •*

250 W LED / CFL 400 VA MLV500 W Inc. / Hal./ELV

• •

Phase select dimmers require a neutral and have low-end trim.

Po

le/

Wir

ing

Max

imum

C

apac

ity

*3-way dimming requires a Pico.

Works with these loads

CanTrackLED CFL Incandescent / Halogen

Electronic low-voltage

Dimmer Capabilities

LED bulbsNo dimmer currently on the market is designed to work with all LED bulbs. That’s why Lutron is committed to testing LED bulb and dimmer performance through its LED Control Center of Excellence.

LED

13 | Lutron

14 | Lutron

Comparing Dimmer CapabilitiesThe chart below compares the three dimmer types we just covered, as well as “universal” dimmers from others.

Lutron C•L

Lutron Reverse Phase

Lutron Phase Select

Universal by others

Requires a neutral wire No Yes Yes Depends on the product

Forward / Reverse phase Forward Reverse Either Depends on the product

Prevents dimmer interaction Yes No Yes No

Low-end calibration Easy No Easy Difficult

Easy to select phase Forward only Reverse only Easy You may not have an option

Allows mixed loads Yes No Yes No

0-10V dimmers have two separate communication wires that send a signal to the

fixture indicating the light level that needs to be achieved. These dimmers, which

require a 0-10V ballast or driver, are used extensively in commercial buildings.

0–10 V Dimmers

15 | Lutron

16 | Lutron

Pendant Troffer Recessed Fixture

How is a 0–10 V dimmer different from other dimmers?

It has additional wires that communicate with the fixture by sending signals between 0 volts and 10 volts.

These signals correlate to a brightness level for the fixture.

Works with these loadsA 0-10V ballast or driver

Black

Ground

Line / Hot

120–277 V~ 50 / 60 Hz

RedSwitched Hot

Purple (+)

Gray (-) 0–10 V-

Ballast / Driver

Red / WhiteTo 3-way connection

Communication wires

0-10V fixtures require separate low-voltage wiring connected to the dimmer (separate from the power) to dim

17 | Lutron

Patented technology extends relay life more than 10 years

No derating for 277V installations

Low- and high-end trim in one product

Diva 0-10 V

Spec grade with heavy-duty components for surge protection and long life

No derating for 277V installations

Low- and high-end trim in one product

Nova T * 0-10 V

NONEUTRAL REQUIRED

NONEUTRAL REQUIRED

THE LUTRON DIFFERENCE

18 | Lutron

Miswire and load incompatibility alert

Lens will flash red if control is miswired or connected to an incompatible fixture

Optimized dimmer performance with selectable dimming curve and smooth fade to on and off

Maestro 0-10 V dimmer sensor

Lutron’s XCT sensing technology

Smart ambient light detection learns user’s preferred light level and keeps lights off when sufficient daylight is available

Lutron’s Adaptive Zero-Cross Switching extends relay lifetime

NEUTRAL OPTIONAL

THE LUTRON DIFFERENCE

19 | Lutron

Diva Nova T* Maestro

Model number DVSTV DVTV* NTSTV MS-Z101

Voltage 120 V - 277 V 120 V - 277 V 120 V - 277 V 120 V - 277 V

Single pole • • • •

3-way • • •

8A • • •

16A* • •

Po

le/

Wir

ing

Max

imum

C

apac

ity

*Requires an external powerpack

B U L B S & S E N S O R S

20 | Lutron

We test bulbs on an ongoing basis for performance with our dimmers, and receive hundreds of test

requests annually. Through our LED Control Center of Excellence, we test each bulb across multiple

parameters before listing it as compatible.

Testing LED Bulb Performance

21 | Lutron

22 | Lutron

We first test bulbs for UL safety. A bulb must pass this test in order to move on to performance testing.

Each bulb is then tested for:

Minimum and maximum load Flicker/shimmer

Buzzing/audible noise Stability from line noise

Start-up time Electrical properties

Bulb manufacturers

Here are just some of the many bulb manufacturers that participate in Lutron’s compatibility testing:

23 | Lutron

LED compatibility tool

Easily find an LED bulb for a C•L dimmer or a C•L dimmer for an LED bulb lutron.com/bulbselector

Once a bulb is deemed compatible we add it to our LED tools:

24 | Lutron

LED product selector tool

• Detailed results of fixture / bulb performance for dimming controls

• Ideal for specification lutron.com/ledtool

In-Wall SensorsLutron occupancy / vacancy sensors are engineered with robust components,

combined with an award-winning design.

25 | Lutron

26 | Lutron

Tamper-resistant lens

Extended relay lifetime (250,000 on / off switch cycles)

Any voltage, any phase(120 V-only sensors also available)

Ambient light detection(set to learnable or fixed)

Available in 27 colors

Electronic low-voltage

Fluorescent / LED

Low-voltage LED

CFL Incandescent / Halogen

Magnetic low-voltage

LED

Works with all lighting loads

THE LUTRON DIFFERENCE

27 | Lutron

Major motion coverage

Minor motioncoverage

Coverage patterns

PIR beam diagram (for reference only)

Ultrasonic coverage (for reference only)

0

10 ft

(3

m)

10 ft

(3

m)

20 ft

(6

m)

20 ft

(6

m)

5 ft

(1.5

m)

5 ft

(1.5

m)

0

10 ft

(3

m)

10 ft

(3

m)

20 ft

(6

m)

20 ft

(6

m)

30 ft

(9

m)

30 ft

(9

m)

10 ft (3 m)

20 ft (6 m)

30 ft (9 m)

4 ft (1.2 m)

0 10 ft (3 m)

20 ft (6 m)

4 ft (1.2 m)

0

28 | Lutron

Easy installation

Easily reassign Change circuit with button press; no rewiring

* Dual-tech, no-neutral models require line-and load-specific wiring

Simplified wiringMistake-proof wiring — no polarity for line- or load-side wiring

Black

Black

Any voltage 120 V & 120 V – 277 V

Any phase Phase A, B, or C

Single-circuit (including dimming)

Any voltage 120 V – 277 V

Any phase Phase A, B, or C

Circuit 1

Circuit 2

Dual-circuit

28 | Lutron

29 | Lutron

Easy setup

No dip switches or dials

Easy-to-see LEDs and asettings button

Mode

• Occupancy

• Ambient light detection

• Vacancy

Simple button- press changes settings

• Timeout • Sensitivity

Sensor mode settings

30 | Lutron

0–10 V dimmers and dual-tech models feature easy-to-see LEDs to indicate settings

Dual-Circuit models feature independent settings per circuit

30 | Lutron

31 | Lutron

2A PIRsingle circuit

5A PIRsingle circuit

6A PIRsingle circuit

PIRdual circuit

Model number

MS-OPS2 MS-OPS5M MS-OPS6M2-DV MS-OPS6-DDV

MS-OPS6M2N-DV neutral model

Technology XCT PIR XCT PIR XCT PIR XCT PIR

Coverage (sq ft) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor)

Timeout 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes

Voltage 120 V 120 V 120-277 V 120-277 V

Amperage/wattage 2 A lighting5 A lighting

3 A fan6 A lighting

3 A (120 V) fan6 A lighting per circuit

4.4 A fan (120 V) per circuit

Single pole, 3-way, Multi-location

Single poleSingle pole / 3-way

Multi-location3-way/Multi-location Single pole

Ambient light detection Smart Smart Smart Smart

Tamper resistant lens • • • •

† Neutral models only. No neutral models are single pole only.

32 | Lutron

C•L dimmer sensor

0–10 V dimmer sensor

Single-circuit dual tech

Dual-circuit dual tech

Model number

MSCL-OP153M MS-Z101 MS-A102 MS-A202

MS-B102 neutral model

MS-B202 neutral model

Technology XCT PIR XCT PIRXCT dual-technology (PIR and ultrasonics)

XCT dual-technology (PIR and ultrasonics)

Coverage (sq ft) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor) 900 (Major) 400 (Minor)

Timeout 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes 1/5/15/30 minutes per circuit

Voltage 120 V 120-277 V 120-277 V 120-277 V per circuit

Amperage/wattage600 W inc/halogen

150 W LED/CFL8 A lighting

neutral optional6 A lighting

4.4 A fan (120 V) per circuit6 A lighting per circuit

4.4 A fan (120 V) per circuit

Single pole, 3-way, Multi-location

3-way/Multi-location 3-way/Multi-location 3-way/Multi-location † 3-way †

Ambient light Smart Smart or fixed Smart or fixed Smart or fixed

Tamper resistant lens • • •

† Neutral models only. No neutral models are single pole only.

33 | Lutron

SkylarkAriadni Diva Skylark Contour Skylark Contour slide-to-off

GRAFIK T Nova T*Lumea

Lutron dimmers available in a range of styles and colors

Maestro Maestro sensor dimmer

Maestro Wireless dimmer and Radio Powr Savr wireless occupancy sensor

Caséta Wireless in-wall dimmer with Pico remote

Caséta Wireless lamp dimmer with Pico remote

Standalone dimmers Architectural dimmers

Digital dimmers Wireless controls

2 | Lutron

Dimmers

3 C•L dimmers

9 Reverse phase dimmers

11 Phase select dimmers

13 Dimmer capabilities

15 0–10 V dimmers

Bulbs & Sensors

21 Testing LED bulb Performance

25 In-wall sensors

Table of Contents

What sets Lutron apart from the restThis guide covers our extensive line of reliable LED controls and the

features that make them stand out from the rest. Whether your job

requires a dimmer, sensor, or both, you can count on the Lutron

difference to give your customers the best LED control experience.

THE LUTRON DIFFERENCE

Satin Colors**

Hot (HT)

Merlot (MR)

Plum (PL)

Turquoise (TQ)

Sea Glass (SG)

Taupe (TP)

Eggshell (ES)

Biscuit (BI)

Snow (SW)

Palladium (PD)

Midnight (MN)

Sienna (SI)

Terracotta (TC)

Greenbriar (GB)

Bluestone (BG)

Mocha Stone (MS)

Goldstone (GS)

Desert Stone (DS)

Stone (ST)

Limestone (LS)

Gloss Colors**

White (WH)†

Ivory (IV) †

Almond (AL) †

Light Almond (LA)

Gray (GR)

Brown (BR)

Black (BL) †

Architectural Metals (GRAFIK T only)

Satin Brass (SB)

Bright Brass (BB)

Bright Chrome (BC)

Satin Chrome (SC)

Satin Nickel (SN)

Bright Nickel (BN)

Architectural Matte (GRAFIK T and Nova T* only)

White (WH)

Beige (BE)

Ivory (IV)

Almond (AL)

Light Almond (LA)

Gray (GR)

Taupe (TP)

Sienna (SI)

Brown (BR)

Black (BL)

Glass(GRAFIK T only)

Clear Glass (CWH)

* Not available for GRAFIK T** For full availability by product refer to

our catalog† Available colors for Caséta Wireless

LED Control SolutionsSmooth, flicker-free dimming for every application

lutron.comLutron Electronics Co., Inc., 7200 Suter Road, Coopersburg, PA 18036-1299

Customer AssistanceOnline: lutron.com/help Email: support@lutron.com Phone: 1.844.LUTRON1 (588.7661) — includes 24/7 technical support

Lutron, C·L, Nova T *, Maestro, Diva, Skylark Contour, Skylark, Ariadni, and Caséta are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. GRAFIK T is a trademark of Lutron Electronics Co.

© 10/2017 Lutron Electronics Co., Inc. I P/N 367-2732 REV B