Custom Test Rig & Instrumentation Development...test rig development: • Hardware selection and...
Transcript of Custom Test Rig & Instrumentation Development...test rig development: • Hardware selection and...
453 Kinns Road Clifton Park New York 12065 US Ph:518-312-1466 www.endeavos.com
Custom Test Rig & Instrumentation Development
ENDEAVOS
Innovations
Introduction
2 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
Testing is the best way to validate engineering models and complex physical phenomena. However, test rig development is an expensive and time consuming process which involves design, analysis, fabrication and instrumentation. These steps often require use of valuable resources which could otherwise be used on the main project. At Endeavos Innovations, we have expertise in all aspects of test rig development:
• Hardware selection and development of P&ID (piping & instrumentation diagram).
• Use pre-built, modular Labview data acquisition & control code for quick implementation.
• Advanced FEA & CFD analysis.
• Custom thermo-fluid analysis code to quickly evaluate piping systems including valves, pumps, heat exchanger etc.
• Detailed CAD design and drawings of test rig.
• Machining Facility.
• Facility to house & test small rigs
Please see examples of recent projects
ENDEAVOS
Innovations
Piping & Instrumentation Diagram
3 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
Develop piping and instrumentation diagram in consultation with client. This step involves appropriate instrumentation & hardware selection
ENDEAVOS
Innovations
Analysis of Piping systems
4 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
Rigs often require complex pipe flow analysis. We have developed a software tool that allows quick flow and thermal analysis of piping systems including dynamic loads. A simplified version can also be embedded in NI Labview for control design.
ENDEAVOS
Innovations
Test Rig Design
5 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
Detailed CAD design for Machining, Assembly fitment and Advanced FEA & CFD Analysis
Recent Project Examples
ENDEAVOS
Innovations
Advanced Analysis
6 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
CFD Analysis Coupled Thermal & Structural Analysis
Gasket Contact Analysis
• Conduct FEA and CFD analysis required during rig development. Here are some examples from recent projects.
• Develop Custom Lumped Parameter System Models
ENDEAVOS
Innovations
Instrumentation & Data Acquisition
7 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
Examples of Data Acquisition and Control Applications Developed at Endeavos Innovations for our clients
ENDEAVOS
Innovations
Machining
8 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
We are co-located with AMT (Advanced Manufacturing Techniques). So most of the rig fabrication can be handled easily in one location. We also have contacts with local vendors for piping, valves, rotor systems and miscellaneous hardware.
ENDEAVOS
Innovations
In-house Testing
9 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
We have space to house test rigs of 2’ x 4’ x 4’ volume if needed by clients. All testing and data processing can be conducted at Endeavos Innovations. Additionally, we have SenTech ovens for testing any material sample within 10” x 12” x 8” volume, Max temp = 1600 𝑜𝐶 . Cyclic temperature testing is possible between ambient and preset high temperature. Ideally suited for testing gaskets, seals etc.
ENDEAVOS
Innovations
Customers
10 453 Kinns Road Clifton Park New York 12065 US Ph: 518-312-1466 www.endeavos.com
www.amt-machine.com
GE Global Research
www.prousa.us
www.sdmarge.com