CUSTOM MANUFACTURING CAPABILITIES AND EQUIPMENT...
-
Upload
vuongthuan -
Category
Documents
-
view
216 -
download
0
Transcript of CUSTOM MANUFACTURING CAPABILITIES AND EQUIPMENT...
3324 Chelsea Avenue Memphis, TN 38108
Toll Free: 1-877-895-PENN
Fax: 901-320-4007
[email protected] www.pennakem.com
CUSTOM MANUFACTURING CAPABILITIES
AND EQUIPMENT
Pennakem Custom Manufacturing
Page 2 of 27
CONTENTS SITE INFORMATION LOCATION
EXPERIENCE
TYPES OF SERVICES AVAILABLE
TRANSPORTATION
UTILITIES
OVERVIEW OF AVAILABLE UNITS EQUIPMENT LISTS FOR AVAILABLE UNITS
Pennakem Custom Manufacturing
Page 3 of 27
SITE INFORMATION LOCATION Northeast section of Memphis, Tennessee
Contact: Tom Colanero at 1-901-320-4071
E-mail: [email protected] EXPERIENCE 50 years of hydrogenation reactions experience using a variety of copper and
nickel based catalysts at conditions ranging from 5-400 psi and 100-300°F.
40 years of de-carbonylation reaction experience using precious metal-based catalysts at pressures ranging from 40-80 psi and temperatures from 300-450°F.
40 years of strong acid catalyst-based polymerization reaction and processing
experience.
50 years experience in steam and high-purity hydrogen generation.
Up to 20 years experience in the following: Reductive animations Condensation reactions Oxidations Esterifications Neutralizations Solvent stripping Air stripping of waste water Recovery of precious metals catalyst Pressure and vacuum distillations Blending
ISO 9001:2000 Certified and PSM/RMP covered site.
Pennakem Custom Manufacturing
Page 4 of 27
Experience with both large and small clients. TYPES OF SERVICES AVAILABLE Batch distillations at pressures ranging from full vacuum to 200 psi. Single and multi-column continuous distillations at pressures ranging from full
vacuum to 100 psi. Reactions including but not limited to: Liquid phase hydrogenations from atmospheric up to 500 psi Liquid phase de-carbonylations at temperatures up to 500°F Aminations Esterifications Oxidations
Blending and packaging operations ranging from bulk to 5-gallon pails. Filtrations. Full service QA/QC laboratory. R&D facilities with an extensive array of equipment and expertise. Pilot plant with a large assortment of equipment and capabilities. Other - Specific needs/requirements can be discussed in detail by inquiry. TRANSPORTATION Rail - CSX switchyard directly across the street from site. Railcar
loading/unloading facilities on-site. 3+ miles of on-site track. Truck - Serviced by all major truck lines. Located ½ mile off I-240. Bulk truck
loading/unloading facilities. Drum/ pail filling, handling and shipping facilities. Barge - Service available via tank car shuttle between the site and the barge
terminal located downtown on the river.
Pennakem Custom Manufacturing
Page 5 of 27
OVERVIEW OF AVAILABLE UNITS UNIT 1 (Bldg 84)
Original Use: Purification and recovery distillation system. Consists of two vacuum distillation columns (one available 100% of time and
one 70%) with associated ancillary equipment, including vessels, pumps, vacuum pumps, exchangers, receivers, etc.
UNIT 2 (Bldg 78) Note: This process currently operates approximately 4 months/yr on a campaign basis. It is idle/unused for approximately 8 months each year. The parallel small reactor noted below is not used in this operation. It, along with its hot oil system, etc, is idle/unused 100% of the time. However, it is still currently connected to and coupled with the operating process. Original Use: Continuous liquid phase endothermic reaction (50-75
psi/400-45°F) process with feed pretreatment and post reaction purification.
Consists of:
A feedstock reactant treatment system with hold tanks. Two vacuum distillation columns with associated ancillary equipment,
including vessels, pumps, vacuum pumps, exchangers, receivers, etc. Originally used for purification of the feed to the reactor.
Two parallel reactors (one large, one small) with distillation columns flanged to the heads and condensers, vessels, pumps, etc., for purification of the vapor out-flow, internal coils with hot-oil recirculation systems, including vessels, pumps, gas fired heaters, etc., for heating the reactors. (See Note above regarding small reactor)
Three pressure distillation columns with associated ancillary equipment, including vessels, pumps, exchangers, receivers, etc., for recovery of the feedstock exiting the reactor and purification of the product.
Two scrubbing columns with associated ancillary equipment, including vessels, exchangers, pumps, receivers, etc., for removing and recovering the product from the waste non-condensable gas stream that exits the reactor.
A system for collection of all the waste streams from the process and recovery of the feedstock contained in them via a vacuum distillation column with its associated ancillary equipment, including vessels, pumps, vacuum pumps, exchangers, receivers, etc.
A centrifuge system and a parallel filtration system for recovery of the catalyst used in the reactor, which in the original use was a precious metal-based material. Includes feed and filtrate vessels, pumps, etc.
Pennakem Custom Manufacturing
Page 6 of 27
Two gas-fired hot-oil (550°F) recirculation systems for heating the reactors. Includes expansion tanks, pumps, gas-fired heaters, etc. (See note above regarding the small reactor and oil system)
UNIT 3 (Bldg 54) Note: A portion of the equipment in this area is currently 100% utilized for another project. The Detailed Equipment List reflects only the specific equipment that is currently available.
Original Use: Reaction of a ring compound to a chain polyol with subsequent
processing and purification of the polyol.
Consists of: An agitated, jacketed CSTR system with vent condenser, cooling,
pumps, exchangers, etc. Parallel Teflon lined batch still pots with Hastalloy steam spargers and
Teflon lined distillation columns for recovery of the unreacted feedstock.
Neutralization and distillation system for purification of the recovered feedstock including columns, reboilers, vessels, exchangers, pumps, etc.
Teflon lined neutralization and decant vessels with pumps, etc. Dehydration system consisting of distillation columns with associated
periphery equipment. Parallel filtration systems with precoat tanks and body feed systems. Two stage solvent stripping system with each stage consisting of an
evaporator and a stripper. The second stage operates under a vacuum.
4 stage steam jet vacuum system capable of 10 mm Hg abs. Solvent recovery and purification system consisting of two distillation
towers with associated reboilers, reflux drums, pumps, etc. Waste water air stripping system consisting of tower, air blower and
preheater, overheads condenser, tanks, pumps, etc.
UNIT 4 (Bldg 45) Original Use: This unit was designed and constructed to be a multi-purpose
pilot plant scale reaction and processing facility.
Consists of small-scale multiple reactors, specialized equipment, and vessels of varying materials of construction and design conditions. By rerouting of piping and hoses, a wide variety of processing configurations can be obtained. Specific needs or requirements can be discussed upon inquiry.
Pennakem Custom Manufacturing
Page 7 of 27
UNIT 5 (Bldg 85)
Original Use: Dehydrolysis or “dewatering” reaction of a diol to form H2O and product with subsequent drying and purification of the product.
Consists of:
A large kettle type high alloy reactor with a distillation column flanged to the top with a condenser, reflux drum and pump, etc. Rx equipped with an internal bayonet type U-bundle for heating.
A small tank and pump system for feeding liquid catalyst to the reactor and a small neutralization system for treating the blowdown waste from the reactor.
A drying and purification system downstream of the reactor consisting of three large, very tall, tray columns with associated reboilers, exchangers, vessels, pumps, etc.
First column - Dewatering column: Removed the bulk of the water from the reaction by a solvent stripping distillation.
Second column - Solvent drying column: Removed the water from the solvent from the first column and returned the solvent back to the first column. Operated under vacuum provided by a vacuum pump. System includes solvent storage and supply system and a waste blowdown collection system.
Third column – Purification column: Completed drying and purification of the overhead product from the first (dewatering) column.
A product work tank system consisting of two large “day” tanks with a system for adding inhibitor to the product before transferring to storage.
A vent collection and scrubbing system.
UNIT 6 (Bldg 55)
Original Use: Reaction of a ring compound to a chain polyol with subsequent processing and purification of the polyol.
Consists of:
An agitated, jacketed CSTR system with vent condenser, cooling, pumps, exchangers, etc.
Parallel Teflon lined batch still pots with Hastalloy steam spargers and Teflon lined distillation columns for recovery of the unreacted feedstock.
Neutralization and distillation system for purification of the recovered feedstock including columns, reboilers, vessels, exchangers, pumps, etc.
Teflon lined neutralization and decant vessels with pumps, etc. Dehydration system consisting of distillation columns with associated
periphery equipment. Parallel filtration systems with precoat tanks and body feed systems.
Pennakem Custom Manufacturing
Page 8 of 27
Two stage solvent stripping system with each stage consisting of an evaporator and a stripper. The second stage operates under a vacuum.
Combination pump and steam jet vacuum system capable of 5 mm Hg abs operating pressure.
Solvent recovery and purification system consisting of two distillation towers with associated reboilers, reflux drums, pumps, etc.
Waste water air stripping system consisting of tower, air blower and preheater, overheads condenser, tanks, pumps, etc.
Pennakem Custom Manufacturing
Page 9 of 27
UNIT 1 (Bldg 84)
Columns
Size MOC Type Internals
Design Press
Design Temp
Comments 6" x 10' CS 1 8' Pall Ring
Packed Sect 15 psi/FV 300°F Base level tank. No reboiler.
8" x 12' CS 1 8' Pall Ring Packed Sect
15 psi/FV 350°F Base level tank. No reboiler.
3' x 38' 304L SS 2 15' Fleximax Packed Sect
15 psi/FV 400°F Bottom tank integral with column. External thermosiphon reboiler.
6.5' x 72' 304L SS Sieve Tray 30 Trays
15 psi/FV 400°F Bottom tank integral with column. External thermosiphon reboiler.
Exchangers
MOC Design Press
(PSI) Design Area (sq. ft.) / # Passes
# Tubes (All 0.75") Shell Tube Shell Tube Temp Comments
33 / 2 14 CS 304L SS 200/FV 150/FV 400F Insulated 107 / 1 46 CS 304L SS 100/FV 100/FV 350F 228 / 8 208 CS 304L SS 100/FV 100/FV 300F 365 / 2 134 CS 316L SS 200/FV 150/FV 400F Insulated 380 / 2 178 CS 316L SS 200/FV 150/FV 400F Insulated 564 / 1 421 CS 304L SS 100/FV 100/FV 400F Insulated 611 / 2 242 CS 316L SS 200/FV 150/FV 400F Insulated 653 / 1 338 CS 304L SS 100/FV 100/FV 400F 677 / 1 506 CS 304L SS 100/FV 100/FV 400F 1531 / 1 797 CS 304L SS 100/FV 100/FV 400F
Vessels Nom Cap
(gals) Nom
Dimen MOC Design Press Design
Temp Comments
20 2’ x 2.5’ V CS 14 psi/FV 350F 70 2’ x 3’ H CS 14 psi/FV 350F 200 3’ x 4’ H CS 14 psi/FV 350F 250 3’ X 4.5’ V CS 200 psi/FV 400F Insulated 300 3’ X 5’ V CS 14 psi/ -1 psi 350F 350 3.5’ X 5’ V CS 14 psi/FV 350F 350 3.5’ X 5’ V CS 14 psi/FV 350F 600 4’ X 6’ H 304L SS 14 psi/FV 350F
1100 5’ X 7.5’ V 316L SS 20 psi/FV 350F 1100 5’ X 7.5’ V CS 14 psi/ -4 psi 350F 2000 5’ X 14’ V CS 14 psi/ -4 psi 350F 3000 7’ X 10’ H CS 14 psi/ -7 psi 350F 5000 6.5’ X 20’
V 304L SS 14” wc/ -
10”wc 350F
Pennakem Custom Manufacturing
Page 10 of 27
Other One liquid seal ring vacuum pumps. Ductile iron, 15 hp, 1166 rpm, 250 icfm DCS control system. UNIT 2 (Bldg 78)
Columns
Size MOC Type Internals Design Press (psi)
Design Temp
Comments
1' x 18' 304L SS Flexring Pkg 100/FV 350 F Bottom pot integral with column. External thermosiphon reboiler
8"/14" x 28' 304L SS 2 Sections Flexring Pkg
14/ -1 psi 350 F Base level tank. No reboiler.
16"/20"x 32' 304L SS 2 Sections Flexring Pkg
100/FV 350 F Base level tank. No reboiler.
2" x 5.5" 304 SS Pall Ring Pkg 100
450 F No base pot or reboiler. Flanged to small reactor head. Available 100% of time, but still tied to process.
2' x 12' 304L SS IMPT Pkg 100/FV 250 F Base level tank. No reboiler 2' x 15' 304L SS Flexipack Pkg 14/FV 350 F Base level tank. No reboiler 2' x 55' 304L SS 2 Sections
Flexpack Pkg 100/FV 350 F Bottom pot integral with column.
External thermosiphon reboiler 2.5' x 6.5' 304L SS Pall Rings 14/FV 350 F Base level tank. No reboiler 2.5' x 6.5' 304L SS Pall Rings 14/FV 350 F Base level tank. No reboiler 3' x 35' 304L SS 2 Sections
Flexpack Pkg 100/FV 375 F Bottom pot integral with column.
External thermosiphon reboiler 4' x 13' 304L SS Flexring Pkg
100/FV 500 F No base pot or reboiler. Flanged to
large reactor head 4.5' x 72.7' 304L SS Flexivalve Trays
30 Trays 14/FV 350 F Bottom pot integral with column.
External thermosiphon reboiler 5' x 55.5' 304L SS Sieve Tray
20 Trays 14/FV 350 F Bottom pot integral with column.
External thermosiphon reboiler Exchangers
MOC Design Press (psi) Comments Area (sq ft) / # Passes
# Tubes (All 0.75") Shell Tube Shell Tube
Design Temp
6 / 1 5 304L SS 304L SS 75/FV 125/FV 350 F Insulated 20 / 1 5 304L SS 304L SS 100/FV 125/FV 350 F Insulated 21 / 1 27 CS 316L SS 175/FV 100/FV 375 F Insulated 29 / 1 11 304L SS 304L SS 100/FV 100/FV 250 F Insulated 29 / 1 11 304L SS 304L SS 100/FV 100/FV 250 F Insulated 30 / 1 12 304L SS 304L SS 150/FV 150/FV 375 F Insulated 30 / 1 12 304L SS 304L SS 150/FV 150/FV 375 F Insulated 30 / 1 12 304L SS 304L SS 150/FV 150/FV 375 F Insulated 30 / 1 12 304L SS 304L SS 150/FV 150/FV 375 F Insulated 54 / 1 316L SS 316L SS 200/FV 200/FV 600 F Insulated 63 / 4 40 CS 304L SS 75/FV 125/FV 350 F Insulated 79 / 4 40 CS 316L SS 125/FV 100/FV 300 F Insulated
101 / 1 48 CS 316L SS 175/FV 100/FV 375 F Insulated 119 / 6 76 304L SS 304L SS 150/FV 150/FV 425 F Insulated
Pennakem Custom Manufacturing
Page 11 of 27
128 / 1 55 304L SS 304L SS 75/FV 125/FV 350 F Insulated 132 / 2 48 304L SS 304L SS 100/FV 125FV 375 F 136 / 8 88 304L SS 304L SS 75/FV 75/FV 350 F Insulated 145 / 1 69 CS 316L SS 175/FV 100/FV 375 F Insulated 151 / 8 96 CS 304L SS 125/FV 100/FV 250 F 182 / 1 78 304L SS 304L SS 75/FV 75/FV 350 F Insulated 198 / 4 72 CS 304L SS 125/FV 120/FV 250 F 300 / 8 200 CS 304L SS 125/FV 100/FV 250 F Insulated 331 / 2 142 304L SS 304L SS 50/FV 125/FV 300 F Insulated 338 / 6 172 304L SS 304L SS 100/FV 125/FV 250 F Insulated 391/ 2 249 304L SS 304L SS 100/FV 125/FV 425 F Insulated 413 / 1 197 304L SS 304L SS 100/FV 100/FV 425 F Insulated 693 / 1 337 CS 316L SS 175/FV 100/FV 375 F Insulated 783 / 2 404 304L SS 304L SS 50/FV 125/FV 300 F Insulated 1161 / 1 451 CS 316L SS 175/FV 100/FV 375 F Insulated 1348 / 4 572 304L SS 304L SS 100/FV 100/FV 300 F Insulated 1567 / 2 748 CS 316L SS 175/FV 100/FV 375 F Insulated
Vessels Nom Cap
(gals) Nom
Dimens MOC Design
Press Design Temp
Comments
30 1.5' X 2' V CS 150 psi 200 F 30 1.5' X 2' V CS 10" wc 200 F Flat Head 60 2' x 2.5' V 304L SS 14 psi/FV 300 F 90 2.5' x 2.5' V 304 SS 100 psi 200 F 100 1.5' x 7' V 304L SS 100 psi 400 F Insulated 100 2' x 4.5' V 316L SS 14 psi/FV 300 F Column base level tank 100 2' x 4.5' V 304L SS 14 psi/FV 250 F 150 2.5' x 4' V CS 10" wc 200 F Flat Bottom 162 2.5' x 4' V 304 SS 150 psi 400 F 200 2' x 8 ' H 304L SS 14 psi/FV 300 F 300 2.5' x 8' H 304L SS 14 psi/FV 350 F 300 2.5' x 8' H 304L SS 14 psi/FV 300 F 350 4' x 3.5' V CS 50 psi 400 F Agitated, Insulated 450 3' x 8' H 304L SS 100 psi 375 F Vertical Perforated Baffle 450 3' x 8' H CS 100 psi 350 F Vertical Perforated Baffle 500 4' x 5' V CS 150 psi 400 F Insulated 600 3.5' x 8' V 316L SS 14 psi/FV 300 F Column Base Level Tank 750 5' x 4.5' V 304L SS 100 psi 200 F Agitated 800 3.5' x 10.5' H 304L SS 14 psi/FV 350 F Vertical Baffle, Two Chambers
1000 304 SS 100 psi 400 F Insulated 1000 5' x 6.5' V 304L SS 10" wc 300 F Flat Bottom 1770 6' X 7.5' V 304 SS 100 psi 500 F Reactor. Insulated. Agitated, Int Coil.
Available 100% of time, but still tied to process.
2750 8' x 8' V CS 10" wc 200 F Flat Bottom 2750 8' x 8' V CS 10" wc 200 F Flat Bottom 3400 8.5' x 9' V 304L SS 100 psi 500 F Reactor. Insulated. Agitated, Int Coil 4200 6' x 20' V CS 100 psi 250 F 5000 8' x 14' V CS 14 psi/FV 250 F Agitated 5200 8' x 14' V CS 10" wc 300 F Flat Bottom
Pennakem Custom Manufacturing
Page 12 of 27
5500 8' x 14' V CS 14 psi 500 F Cone Bottom, Insulated 5800 10' x 10' V 304L SS 10" wc 300 F Flat Bottom Insulated 6000 8' x 15' V 304L SS 100 psi 300 F 7000 11' x 10.5' V CS 10" wc 250 F Flat Bottom 7800 11' x 11' V 304L SS 10" wc 300 F Flat Bottom Insulated 8000 10' x 14' V CS 10" wc 350 F Flat Bottom 8000 12' x 8.7' V 304 SS 10" wc 200 F
10,000 10' x 17' V CS 100 psi 350 F 10,000 12.5' x 11' V CS 10" wc 200 F Flat Bottom 15,000 12' x 18' V CS 10" wc 200 F Flat Bottom
Other Two Liquid Seal Ring vacuum pumps. Ductile Iron, 50 Hp, 1170 RPM, 200
ICFM. 80 mm Hg. One Liquid Seal Ring vacuum pump. Ductile Iron, 20 Hp, 1170 RPM, 50
ICFM. 40 mm Hg. One Hot Oil recirculation system including expansion tank, overflow tank,
pump, etc. 15MM BTU/hr capacity. One Hot Oil recirculation system including expansion tank, overflow tank,
pump, etc. 5MM BTU/hr capacity. Available 100% of time, but still tied to process.
One 6 sq meter candle type filtration system One process centrifuge. 10 gpm feed rate.
Single Loop Control System UNIT 3 (Bldg 54) Columns
Size MOC Internals Design Press
Design Temp
Comments
6" x 9' Derakane 470
Random Polypro 14 psi/FV 200F Includes bottom pot
3' x 23' TFE Lined CS
Random Polypro 2 psi/ -1 psi 270F Loose liner
3' x 23' TFE Lined CS
Random Polypro 2 psi 270F Loose liner
14”x 11.5' 316L SS Random SS 14 psi/FV 250F
4' x 40.5' Hetron 980 Random Polypro 6 psi/ -1 psi 200F
Pennakem Custom Manufacturing
Page 13 of 27
32" x 24' 304LSS Sieve Trays 30 psi/FV 350F
2' x 16' 304LSS Random SS 14 psi/FV 250F Includes bottom pot
10" x 14' 304LSS Random SS 14 psi/FV 300F
2' x 15' 304LSS Sieve Trays 14 psi/FV 300F
Sections Bot 1.5' x 32.5’
Mid 2' x 15’ Top 2.5' x 5'
304LSS Random SS 50 psi/FV 350F
Exchangers
Area(sq ft) /# Pass
# Tubes/ Size (")
MOC Shell Tube
Press Shell/Tube
TEMP (F)
Nom Shell Dimens
Comments
400 / 1 145 0.75
CS Alloy 20
100 psi-FV 150 psi-FV
340 15" x 8'
74 / 2 48 0.75
CS CS
100 psi-FV 150 psi-FV
340 12" x 7'
22 / 1 27 0.75
CS 316L SS
100 psi-FV 150 psi-FV
340 6' x 4'
22 / 1 27 0.75
CS 316L SS
100 psi-FV 150 psi-FV
340 6' x 4'
39 / 1 20 0.75
304L SS 304L SS
150 psi-FV 100 psi-FV
340 8" x 10'
181 / 5 ? 0.625
Graphite Block
100 psi-FV 100 psi-FV
360 30" x 8'
734 / 1 ? 0.625
Graphite Block
100 psi-FV 100 psi-FV
360 28" x 15'
734 / 1 ? 0.625
Graphite Block
100 psi-FV 100 psi-FV
360 28" x 15'
22 / 1 29 0.75
CS 316L SS
100 psi-FV 100 psi-FV
340 8” x 4’
22 / 1 29 0.75
CS 316L SS
100 psi-FV 150 psi-FV
340 8” x 4’
36 / 1 31 0.75
CS 316L SS
100 psi-FV 100 psi-FV
340 10” x 6’
36 / 1 31 0.75
CS 316L SS
100 psi-FV 100 psi-FV
340 10” x 6’
123 / 2 (U) 30 0.75
CS 304L SS
200 psi-FV 150 psi-FV
390 12” x 12’
20 / 1 27 0.75
CS 316L SS
100 psi-FV 150 psi-FV
340 8” x 4’
560 / 7 ? 0.625
Graphite Block
100 psi-FV 100 psi-FV
360 28” x 17’
145 / 7 ? 0.625
Graphite Block
100 psi/FV 100 psi-FV
360 24" x 7'
2010 / 1 439 0.875
CS Karbate
100 psi-FV 100 psi-FV
360 38" x 14'
41 / 1 27 0.75
CS 316L SS
100 psi-FV 150 psi-FV
340 8" x 8 '
Pennakem Custom Manufacturing
Page 14 of 27
380 / 1 320 0.75
CS 304LSS
200 psi-FV 150 psi-FV
370 21" x 6'
735 / 1 316 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 21" x12'
440 / 2 160 0.75
CS 304L SS
100 psi-FV 150 psi-FV
340 16" x 8'
296 / 1 195 0.75
CS 304L SS
100 psi-FV 150 psi-FV
340 17" x 8'
75 / 8 24 0.75
CS 304L SS
200 psi-FV 150 psi-FV
400 8" x 16'
98 / 1 31 1.00
CS 304L SS
200 psi-FV 50 psi-FV
400 9" x 12'
214 / 1 55 0.75
CS 304L SS
100 psi-FV 50 psi-FV
300 9" x 20'
---- ---- 304LSS 304LSS
15 psi-FV 150 psi-FV
340 18" x 16' Disc & Donut Falling Film Evap
11 / 1 7 1.00
CS 304L SS
200 psi-FV 50 psi-FV
400 7" x 6'
---- ---- 304LSS 304LSS
15 psi-FV 150 psi-FV
340 18" x 11' Disc & Donut Falling Film Evap
247 / 1 126 0.75
CS 304LSS
100 psi-FV 150 psi-FV
350 13" x 10'
238 / 6 (U) 63 0.50
304LSS 304LSS
150 psi-FV 100 psi-FV
300 13” x 11’
161 / 2 104 0.75
CS 304LSS
200 psi-FV 250 psi-FV
370 14" x 8'
238 / 2 180 0.75
CS 304LSS
200 psi-FV 150 psi-FV
370 17" x 7'
238 / 2 180 0.75
CS 304LSS
200 psi-FV 150 psi-FV
370 17" x 7'
182 / 2 94 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 14" x 10'
59 / 1 51 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 10" x 6'
193 / Bayonet U
136 0.625
316L SS 200 psi-V 390 16" x 4' Reboiler
327 / 1 208 0.75
CS 304LSS
100 psi-FV 150 psi-FV
430 16" x 8'
42 / 4 36 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 9" x 6'
234 / 1 85 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 11" x 14'
177 / 1 392 0.625
304LSS 304LSS
100 psi-FV 150 psi-FV
340 18" x 3'
193 / Bayonet U
90 0.75
316L SS 200 psi-FV 390 15" x 5' Reboiler
325 / 1 392 0.625
CS 304L SS
100 psi-FV 150 psi-FV
340 18" x 10'
57 / 1 121 0.625
304L SS 304L SS
200 psi-FV 150 psi-FV
340 11" x 3'
193 / Bayonet U
90 0.75
316L SS 200 psi/FV 390 15" x 5' Reboiler
Pennakem Custom Manufacturing
Page 15 of 27
174 / 1 121 0.625
304L SS 304L SS
100 psi-FV 150 psi-FV
340 15" x 9'
108 / 1 55 0.75
CS 304LSS
100 psi-FV 150 psi-FV
340 9" x 10'
32 / 8 24 0.75
CS 304LSS
100 psi-FV 150 psi-FV
370 9" x 7'
25 / 1 24 0.75
CS 304L SS
100 psi-FV 150 psi-FV
340 9" x 5'
133 / 6 43 0.75
CS 304L SS
200 psi-FV 150 psi-FV
370 9" x 7'
42 / 2 72 0.75
CS CS
200 psi-FV 150 psi-FV
390 11" x 3'
Vessels Nom Cap
(gals)
Nom Dimen Orient
MOC Design Press
Design Temp (F)
Comments
15,000 12' x 14' H CS 150 psi/FV 300 400 4' x 5' H CS 100 psi/FV 300 300 3.5' x 4' V 304 SS 14 psi / -1 psi 250 4000 8' x 10' V TFE Lined CS 2 psi / -1 psi 270 Loose liner. Hastalloy Sparger 4000 8' x 10' V TFE Lined CS 2 psi / -1psi 270 Loose liner. Hastalloy Sparger 600 4' x 6.5' H TFE Lined CS 2 psi / -1psi 270 Loose liner 600 4' x 6.5' H TFE Lined CS 2 psi / -1psi 270 Loose liner 1500 6.5' x 8.5' V CS 100 psi/FV 250 1000 5' x 7' V 316L SS 14 psi / -1 psi 250 With agitator 1000 5' x 7' V 316L SS 14 psi / -1 psi 250 With agitator
10,000 11' x 14' V Kynar lined Hetron
2 psi -1psi 220
500 4' x 5' V Kynar lined Hetron
2 psi / -1psi 220
1000 5' x 8' V Hetron 922 14 psi / -1 psi 220 700 5' x 8' V Kynar line CS 14 psi / -1 psi 250 Tefzel coated 316SS Agitator
5000 9' x 14' V 316L SS 14 psi / -1 psi 250 500 4' x 5' V HETRON 980 14 psi / -1 psi 220 300 3.5' x 6' V Derakane 411 14 psi / -1 psi 180
4000 8' x 10' V TFE Lined CS 2 psi / -1psi 270 Loose liner. With Agitator 900 5' x 8' V 304L SS 30 psi/FV 350 Column Base 750 4' x 8' H 304L SS 14 psi/FV 250
1000 5' x 7' V 304 SS 14 psi / -1psi 200 With Agitator 1000 5' x 7' V 304 SS 14 psi / -1psi 200 With Agitator 200 3' x 4’ V 304 SS 14 psi / -1psi 340 With Agitator 200 3' x 4' V 304 SS 14 psi / -1psi 340 With Agitator
2300 7' x 8' V 304 SS 14 psi / -1psi 300 20 2' x 2' V 304 SS 14 psi / -1psi 300
50,000 V 304L SS 12" wc/ -4"wc 250 With Side Mount Agitator 26,000 V 304L SS 12" wc/ -4"wc 250 With Side Mount Agitator 12,000 V 304L SS 12" wc/ -4"wc 300 With Side Mount Agitator 1200 5' x 8' V 304L SS 14 psi / -1psi 250 500 4' x 5' V 304L SS 14 psi/FV 300 500 3.5' x 7' H 304L SS 14 psi/FV 300
4000 8' x 10' V 304L SS 14 psi / -1psi 250 With Agitator
Pennakem Custom Manufacturing
Page 16 of 27
300 3.5'x4' V 304L SS 14 psi/FV 300 500 3.5 'x 7' H 304L SS 14 psi/FV 250 200 3' x 4' H 304 SS 50 psi 350 Column Base 2000 6.5' x 8' V CS 20"wc/ -6"wc 150 100 2.5' x 3' V CS 14 psi/FV 250 500 4' x 5.5' V Alloy 20 Vessel 14
psi/FV Jckt 100 psi
350 CS Jacketed with Agitator
Other 4 stage steam jet vacuum system capable of 10 mm Hg abs.
Vertical leaf filter. 100 psi, 304SS, 350F, 100 sq ft.
Vertical leaf filter. 100 psi, 304SS, 350F, 200 sq ft.
UNIT 4 (Bldg 45) Columns
Size MOC Type Internals Design Press
Design Temp
Comments
8" x 304 SS 150 psi 500 F 25 Theoretical Stages
Exchangers
MOC Design Press Comments Area (sq ft) # Passes
# Tubes Diam Shell Tube Shell Tube
Design Temp
34 / 1 3/8" CS SS 150 psi 150 psi 350 F 65 / 1 84 ¾" CS 316 SS 150 psi 150 psi 350 F
Vessels Nom Cap
(gals) Nom
Dimens MOC Design
Press Design Temp
Comments
15
12" x 27" V 316 SS 600 psi 500 F Reactor. Agitated, jacketed, insulated, gas sparge ring.
20
18" x 16" V Glass Lined
200 psi 500 F Not installed. Reactor. Agitated, jacketed, 20 sq ft overhead condenser - 75 psi Des press. 26 3/4" SS tubes.
20
20" x 15" V 316L SS 150 psi 350 F Not installed. Reactor. Agitated, jacketed, 34 sq ft overhead condenser - 150 psi design press. 3/8" SS tubes
35 16" x 43" V SS 150 psi 200 F Receiver 35 16" x 43" V SS 150 psi 200 F Receiver
50
24" x 25" V 316L SS 150 psi 350 F Reactor. Jacketed. Scraped wall agitator, 34 sq ft overhead condenser - 150 psi design press. 3/8" SS tubes. Inclds 25 stage column listed above.
50 24" x 27" V Glass 150 psi 650 F Agitated, jacketed, reactor. 3" 5 stage column
Pennakem Custom Manufacturing
Page 17 of 27
Lined flanged to head. 14 sq ft thimble style Glasteel overhead condenser. 150 psi design press.
50 Glass Lined
125 psi 500 F Receiver
100 32" x 64" V Glasslined 150 psi 450 F Not installed. Agitated, insulated jacketed Rx 150 40" x 28" V 316 SS 75 psi Not installed. Agitated, insulated jacketed
reactor 350 45" x 51" V 316L SS 300 psi 350 F Reactor. Var speed agitator, jacketed,
insulated. Gas sparge ring. 20 gpm recirc pump. 8" diam column with 12 theor stages - Atm press or vac only. Includes 65 sq ft exchanger listed above.
Other 15 Ton Chilled Water System. Two 1-tube fixed bed vapor reactor systems. Includes vaporizers,
condensers, receivers, and pumps. Tubes are 1.25" x 6'. Vacuum pump system Tolhurst basket centrifuge. 20" Diam. 5 sq ft. 316 SS 11 sq ft Sparkler pressure leaf filter. 304 SS. 60 psi @ 350 F. 18 sq ft Sparkler pressure leaf filter. 304 SS. 60 psi @ 350 F. 26 sq ft
Sparkler horizontal pressure leaf filter. 304 SS. 60 psi @ 400 F. Steam jacketed.
2 weigh scales. 1000 lb capacity 50 KW hot oil system. 316 SS Two 304 SS vacuum pumps 2” SS Pope Wiped Film Evaporator 0.35 sq ft. 6” 316SS Jacketed Pope Wiped Film Evaporator 2.35 sq ft. Also have glass
body for unit. BTRS-90 unit for vapor phase studies Pilot scale operation. Control system is a mix of single loop and manual
controls
Pennakem Custom Manufacturing
Page 18 of 27
UNIT 5 (Bldg 85) Note – This list arranged alphanumerically by equipment #.
Design Conditions
Equip # Service Qty SIZE OR TYPE Design Cap Press.
PSIGTemp
°F
Materials Of Construction HP MOTOR
ENCL
A610 INHIBITOR TANK AGITATOR 1 3.5' IMPELER 1/3 TEFC
D101 Feedstock Storage Tank 1 48'ID x 31' 419,629
gal 0.4 200 CS W/LINER -- --
D200 REACTOR HEAVIES 1 4'ID X 8' T/T -- 50/FV 400 DUPLEX 2205 -- --
D201 REACTOR REFLUX DRUM 1 5'ID X 7' 6'T/T -- 50/FV 350 316L SS -- --
D202 REACTOR B.D.NEUT. DRUM 1 3' ID X 6' -1 "T/T -- 50/FV 350 316L SS -- --
D301 SOLVENT STRIPPER REFLUX DRUM 1 HORIZONTAL
4' 6" ID X 12' T/T -- 50/FV 350 CS -- --
D401 SOLVENT STRIPPER REFLUX DRUM 1 4'ID X 6' T/T -- 14/FV 350 304L SS -- --
D404 Solvent Storage Tank 1 8'-6"ID X 19'H -- .5/-.36 350 304L SS -- --
D501 LIGHTS REMOVAL COL.REFLUX DRUM 1 4'6" ID X 12' T/T -- 50/FV 350 CS -- --
D502 PRODUCT K.O.DRUM 1 24" OD X 6' T/T -- 150/FV 350 CS -- --
D503 PRODUCT PUMP SUCTION DRUM 1 36"ID X 4'6" T/T -- 200/FV 400 CS -- --
D600 A/B
PRODUCT STORAGE TANK 2 12'ID X 15' T/T -- 14/6"
VAC 250 CS -- --
D610 INHIBITOR TANK 1 2'-6"OD X 2' 10"wc/ -6"wc 350 CS
D900 CONDENSATE FLASH DRUM 1 6'ID X 9' T/T -- 14 280 CS -- --
100/FV 300 CS
E101 Feedstock Storage Tank Heater 1 AEL 13-120
209 sq.ft. 114,000 BTU/HR
100/FV 350
304L SS
--- ---
Pennakem Custom Manufacturing
Page 19 of 27
14/FV CODE HASTELLOY B3
E200 REACTOR HEATER 1 U-TUBE 1113 sq.ft.
7.6 MM BTU/HR
150/FV CODE HASTELLOY B3
--- ---
100/FV 400 CS
E201 REACTOR O.H.
CONDENSOR 1 BEU 32-96 971 sq.ft.
6.39 MM BTU/HR
100/FV 400 DUPLEX 2205
--- ---
100/FV 300 / 300 CS
E202 NEUTRALIZATION
DRUM COOLER 1 AEM 6-72 18.8 sq.ft.
15299 BTU/HR
100/FV 250 / 250 316L SS
--- ---
150/FV400 / 350 CS
E300 DEHYDRATOR
COLUMN REBOILER 1 AEL 17-96 410 sq.ft.
5.98 MM BTU/HR
100/FV 400 / 350 304L SS
--- ---
100/FV 350 / 350 304L SS
E301 DEHYRATOR COLUMN CONDENSER
1 AJM 19-144 634 sq.ft.
4.22 MM BTU /HR
100/FV 300 / 300
304L SS TUBES/ CS CHANNEL
--- ---
100/FV400 / 350 304L SS
E400 SOLVENT STRIPPER REBOILER 1 BKU 40/27 -144
1232 sq.ft. 6.64 MM BTU/HR
150/FV
400 / 350
304L SS TUBES/ CS CHANNEL
--- ---
100/FV 250/250 304L SS
E401 SOLVENT STRIPPER CONDENSER 1 AJM 23-144
994 sq.ft. 6.64MM BTU/HR
100/FV 300 / 300
304L SS TUBES/ CS CHANNEL
--- ---
150/FV 400 / 350 304L SS
E402 SOLVENT STRIPPER BOTTOMS COOLER 1 AFM 12-240
416 sq.ft.. 2.58 MM BTU/HR
100/FV 300 / 300
304L SS TUBES/ CS CHANNEL
---
E404 Solvent Storage Tank 1 BEU 6-120 0.415 MM --- ---
Pennakem Custom Manufacturing
Page 20 of 27
150/FV
420 / 350 CS
Heater 33 sq.ft. BTU/HR
75 190 304L SS
150/FV 400 / 350 CS
E500 LIGHTS REMOVAL COLUMN REBOILER 1 AEL 17-96
423 sq.ft. 8.65MM BTU/HR
75/FV 300 / 300
304L SS TUBES/ CS CHANNEL
--- ---
100/FV350/35
0 CS
E501
LIGHTS REMOVAL COLUMN CONDENSER
1 AEM 25-144 1065 sq.ft.
6.24 MM BTU/HR
100/FV
300 / 300 CS
--- ---
200/FV 390 CS
E502 PRODUCT
CONDENSER 1 AEL 15-132 384 sq.ft.
1.95 MM BTU/HR
150/FV 390 316L SS
--- ---
EJ201 NEUTRALAZATION DRUM EDUCTOR 1 2" 88 GPM
F202 A/B FILTER 2 SIMPLEX 40 GPM 150 250 316 SS
P100 RAILCAR UNLOADING PUMP 1 VERTICAL
3 X 4 - 10 ANSI 200 GPM -- 70 316 SS 7.5 TEFC
P101 A/B
Feedstock Storage Pumps 2 VERTICAL
3 X 4 - 10 ANSI 300 GPM -- 70 316 SS 30 TEFC
P102 A/B Catalyst Feed Pumps 2 METERING
PUMP 0.27 GPH -- 140 ALLOY 20 1/3
P103 Catalyst Charging Pump 1 AIR
DIAPHRAGM 2.4 GPM -- 140 TEFLON -- --
P109 PROCESS SUMP PUMP 1 HORIZONTAL
1 X 1.5 - 6 ANSI 40 GPM -- 100 DI / 316 SS 7.5 TEFC
P200A/B
REACTOR BOTTOMS PUMPS 2
VERTICAL 1.5 X 3 - 13
ANSI 126 GPM -- 264 HASTELLOY
B3 10 TEFC
P201 A/B
REACTOR REFLUX PUMPS 2 VERTICAL
1.5 X 2 - 6 ANSI 55 GPM -- 250 316 SS 7.5 TEFC
P202 A/B
REACTOR NEUT. PUMPS 2 HORIZONTAL
1 X 1.5 - 6 ANSI 40 GPM -- 264 316 SS 7.5 TEFC
P300 A/B
DEHYDRATOR COL BOTTOMS PUMPS 2 VERTICAL
1.5 X 2 - 8 ANSI 55 GPM -- 450 316 SS 3 TEFC
P301 A/B
DEHYDRATOR COL.REFLUX PUMPS 2 VERTICAL
1.5 X 3 - 8 ANSI 70 GPM -- 400 316 SS 10 TEFC
Pennakem Custom Manufacturing
Page 21 of 27
P400 A/B
SOLVENT STRIPPER BOTTOMS PUMPS 2 VERTICAL
1.5 X 2 - 8 ANSI 70 GPM -- 400 316 SS 15 TEFC
P401 A/B
SOLVENT STRIPPER REFLUX PUMPS 2 VERTICAL
1.5 X 2 - 6 ANSI 20 GPM -- 450 316 SS 7.5 TEFC
P404 A/B Solvent Storage Pumps 2 VERTICAL
1.5 X 2 - 6 ANSI 50 GPM -- 120 316 SS 7.5 TEFC
P500A/B
LIGHTS REMOVAL COL. BOTTOMS PUMPS
2 HORIZONTAL 1 X 1.5 - 8 ANSI 10 GPM -- 300 CS 3 TEFC
P501 A/B
LIGHTS REMOVAL COL.REFLUX PUMPS 2 VERTICAL
1.5 X 3 - 8 ANSI 100 GPM -- 300 316 SS 10 TEFC
P502 A/B PRODUCT PUMPS 2 VERTICAL
1.5 X 2 - 8 ANSI 30 GPM -- 120 316 SS 3 TEFC
P600 A/B Work Tank Pumps 2 VERTICAL
1.5 X 3 - 8 ANSI 75 GPM -- 200 316 SS 15 TEFC
P700 A/B
VENT SCRUBBER PUMPS 2 HORIZONTAL
1 X 1.5 - 8 ANSI 10 GPM -- 250 316 SS 7.5 TEFC
P900 CONDENSATE FLASH TANK PUMP 1 VERTICAL
1.5 X 3 - 6 ANSI 100 GPM -- 270 DI / 316 SS 10 TEFC
P975 A/B
PLANT DRAINAGE SUMP PUMPS 2 HORIZONTAL
3 X 3 - 10 ANSI 100 GPM -- 120 DI / 316 SS 7.5 TEFC
PK403 SOLVENT STRIPPER VACUUM SYSTEM 1 6' X 1'-6" 80 LB/HR 316 SS 7.5 TEFC
R200 REACTOR 1 10'ID X 22' T/T -- 50/FV 400 DUPLEX 2205 -- --
T200 REACTOR SCRUBBER 1 48"ID X 18'6"
T/T -- 50/FV 400 DUPLEX 2205 -- --
T300 DEHYDRATOR COLUMN 1 48"ID X 110'3"
T/T -- 50/FV 400 304L SS -- --
T400 SOLVENT STRIPPER 1 60"ID X 50'6" T/T -- 50/FV 400/35
0 304L SS -- --
T500 LIGHTS REMOVAL COL. 1 54"ID X 103'3"
T/T -- 50/FV 400/350 CS -- --
T700 VENT SCRUBBER 1 8"/24" DIA X 22' T/T -- 50 400 304L SS -- --
UNIT 6 (Bldg 55) Columns TAG # SIZE MATRL TYPE TEMP PRESS Comments T110 6" X 9' Derakane 470 Dumped Polypro packing 200 14psi/fv Includes bottom pot
T201A 3'X23' TFE Lined CS Dumped Polypro packing 270 2psi/-1psi Loose liner
Pennakem Custom Manufacturing
Page 22 of 27
T201B 3'X23' TFE Lined CS Dumped Polypro packing 270 2psi/-1psi Loose liner T211 14"X11.5' 316L SS Dumped SS packing 250 14 PSI/FV T213 4'X40.5' Hetron 980 Dumped PP packing 200 6 PSI/-1 PSI T303 32"X24' 304LSS SIEVE TRAYS 350 30 PSI/FV T702 2'X16' 304LSS Dumped SS packing 250 14 PSI/FV Includes bottom potT703 10"X14' 304LSS Dumped SS packing 300 14 PSI/FV T706 2'X15' 304LSS SIEVE TRAYS 300 14 PSI/FV
T802
Sect 1.5',2',2.5'
X32.5' 304LSS Dumped SS packing 350 50 PSI/FV T805 2'X41' 304LSS Dumped SS packing 390 150 PSI/FV Exchangers
TAG # AREA (sq ft) /
# PASS # TUBES /
SIZE (") PRESS: SHELL /
TUBE TEMP (F)Nom Shell
Dimens MATRL: SHELL / TUBE E101 400 / 1 145 / 0.75 100 PSI-FV/150 PSI-FV 340 15" x 8' CS/Alloy 20 E102 653 / 1 273 / 0.75 100 PSI-FV/150 PSI-FV 340 34" x 8' CS/316L SS E103 1141 / 1 555 / 1.00 100 PSI-FV/150 PSI-FV 340 36" x 8' CS/316L SS
E105A 74 / 2 48 / 0.75 100 PSI-FV/150 PSI-FV 340 12" x 7' CS/CS E107 22 / 1 27 / 0.75 100 PSI-FV/150 PSI-FV 340 6' X 4' CS/316L SS E108 22 / 1 27 / 0.75 100 PSI-FV/150 PSI-FV 340 6' X 4' CS/316L SS E109 39 / 1 20 / 0.75 150 PSI-FV/100 PSI-FV 340 8" X 10' 304L SS/304L SS E201 181 / 5 / 0.625 100 PSI-FV/100 PSI-FV 360 30" X 8' Graphite Block
E202A 734 / 1 /0.625 100 PSI-FV/100 PSI-FV 360 28" x 15' Graphite Block E202B 734 / 1 /0.625 100 PSI-FV/100 PSI-FV 360 28" x 15' Graphite Block E204A 22 / 1 29 / 0.75 100 PSI-FV/150 PSI-FV 340 8" x 4' CS/316L SS E204B 22 / 1 29 / 0.75 100 PSI-FV/150 PSI-FV 340 8" x 4' CS/316L SS E206A 36 / 1 31 / 0.75 100 PSI-FV/100 PSI-FV 340 10" x 6' CS/316L SS E206B 36 / 1 31 / 0.75 100 PSI-FV/100 PSI-FV 340 10" x 6' CS/316L SS E207 123 / 2 (U) 30 / 0.75 200 PSI-FV/150 PSI-FV 390 12" x 12' CS/304L SS E208 20 / 1 27 / 0.75 100 PSI-FV/150 PSI-FV 340 8" x 4' CS/316L SS E210 560 / 7 /0.625 100 PSI-FV/100 PSI-FV 360 24" x 17' Graphite Block E212 145 / 7 /0.625 100 PSI-FV/100 PSI-FV 360 24" x 7' Graphite Block
E214 2010 / 1 439 / 0.875 100 PSI-FV/100 PSI-FV 360 38" x 14' CS/Karbate
E301 41 / 1 27 / 0.75 100 PSI-FV/150 PSI-FV 340 8" x 8 ' CS/316L SS E303 380 / 1 320 / 0.75 200 PSI-FV/150 PSI-FV 370 21" x 6' CS/304LSS E304 735 / 1 316 / 0.75 100 PSI-FV/150 PSI-FV 340 21" x12' CS/304LSS E402 440 / 2 160 / 0.75 100 PSI-FV/150 PSI-FV 340 16" x 8' CS/304L SS E405 296 / 1 195 / 0.75 100 PSI-FV/150 PSI-FV 340 17" x 8' CS/304L SS E501 75 / 8 24 / 0.75 200 PSI-FV/150 PSI-FV 400 8" x 16' CS/304L SS E502 98 / 1 31 / 1.00 200 PSI-FV/50 PSI-FV 400 9" x 12' CS/304L SS E503 214 / 1 55 / 0.75 100 PSI-FV/50 PSI-FV 300 9" x 20' CS/304L SS
E504 ---- ---- 15 PSI-FV/150 PSI-FV 340 18" x 16' 304LSS/304LSS Disc&Donut Evap
E505 11 / 1 7 / 1.00 200 PSI-FV/50 PSI-FV 400 7" x 6' CS/304L SS
E506 ---- ---- 15 PSI-FV/150 PSI-FV 340 18" x 11' 304LSS/304LSS Disc&Donut Evap
E508 247 / 1 126 / 0.75 100 PSI-FV/150 PSI-FV 350 13" x 10' CS/304LSS E509 8 / 2 100 PSI-FV/150 PSI-FV 430 CS/304LSS
Pennakem Custom Manufacturing
Page 23 of 27
E510 238 / 6 (U) 63 / 0.50 150 PSI-FV/100 PSI-FV 300 13" x 11' 304LSS/304LSS E606 161 / 2 104 / 0.75 200 PSI-FV/150 PSI-FV 370 14" x 8' CS/304LSS E608 238 / 2 180 / 0.75 200 PSI-FV/150 PSI-FV 370 17" x 7' CS/304LSS E609 238 / 2 180 / 0.75 200 PSI-FV/150 PSI-FV 370 17" x 7' CS/304LSS E701 182 / 2 94 / 0.75 100 PSI-FV/150 PSI-FV 340 14" x 10' CS/304LSS E702 59 / 1 51 / 0.75 100 PSI-FV/150 PSI-FV 340 10" x 6' CS/304LSS
E703 193 / Bayonet
U 136 / 0.625 200 PSI/FV 390 16" x 4' 316L SS
E704 327 / 1 208 / 0.75 100 PSI-FV/150 PSI-FV 430 16" x 8' CS/304LSS E706 42 / 4 36 / 0.75 100 PSI-FV/150 PSI-FV 340 9" x 6' CS/304LSS E707 234 / 1 85 / 0.75 100 PSI-FV/150 PSI-FV 340 11" x 14' CS/304LSS
E801 177 / 1 392 / 0.625 100 PSI-FV/150 PSI-FV 340 18" x 3' 304LSS/304LSS
E802 193 / Bayonet
U 90 / 0.75 200 PSI/FV 390 15" x 5' 316L SS
E803 325 / 1 392 / 0.625 100 PSI-FV/150 PSI-FV 340 18" x 10' CS/304L SS
E804 57 / 1 121 / 0.625 200 PSI-FV/150 PSI-FV 340 11" x 3' 304L SS/304L SS
E805 193 / Bayonet
U 90 / 0.75 200 PSI/FV 390 15" x 5' 316L SS
E806 174 / 1 121 / 0.625 100 PSI-FV/150 PSI-FV 340 15" x 9' 304L SS/304L SS
E807 108 / 1 55 / 0.75 100 PSI-FV/150 PSI-FV 340 9" x 10' CS/304LSS E808 32 / 8 24 / 0.75 100 PSI-FV/150 PSI-FV 370 9" x 7' CS/304LSS E809 25 / 1 24 / 0.75 100 PSI-FV/150 PSI-FV 340 9" x 5' CS/304L SS E902 133 / 6 43 / 0.75 200 PSI-FV/150 PSI-FV 370 9" x 7' CS/304L SS E904 42 / 2 72 / 0.75 200 PSI-FV/150 PSI-FV 390 11" x 3' CS/CS
Vessels TAG # NOM CAP MATRL PRESS TEMP DIMEN COMMENTS D66B 15,000 gal CS 150psi/FV 300 F 12' x14' H D66C 15,000 gal CS 150psi/FV 300 F 12' x14' H D104
A 4000 GAL Tefzel Lined CS 14 psi/-1 psi 250 8'x10' V With agitator D104
B 4000 GAL Tefzel Lined CS 14 psi/-1 psi 250 8'x10' V With agitator D105 200 GAL CS 14PSI/FV 250 3'x4' V D107 400 gal CS 100 psi/FV 300 4'X5' H D109 300 GAL 304 SS 14 psi/-1 psi 250 3.5'X4' V D201
A 4000 GAL TFE Lined CS 2psi/-1psi 270 8'x10' V Loose liner. Hastalloy Sprager
D201B 4000 GAL TFE Lined CS 2psi/-1psi 270 8'x10' V
Loose liner. Hastalloy Sparger
D202A 600 GAL TFE Lined CS 2psi/-1psi 270 4'X6.5' H Loose liner
D202B 600 GAL TFE Lined CS 2psi/-1psi 270 4'X6.5' H Loose liner
D203 1500 GAL CS 100 PSI/FV 250 6.5'X8.5' V D204
A 1000 GAL 316L SS 14 psi/-1 psi 250 5'x7' V With agitator
Pennakem Custom Manufacturing
Page 24 of 27
D204B 1000 GAL 316L SS 14 psi/-1 psi 250 5'x7' V With agitator
D206A 4000 GAL TFE Lined CS 2psi/-1psi 270 8'x10' V Loose liner.
D206B 4000 GAL TFE Lined CS 2psi/-1psi 270 8'x10' V Loose liner.
D208 10,000 GAL Kynar lined Hetron 2psi/-1psi 220 11'x14' V D209 500 GAL Kynar lined Hetron 2psi/-1psi 220 4'x5' V D210 1000 GAL Hetron 922 14psi/-1 PSI 220 5'x8' V D211 700 GAL Kynar lined CS 14psi/-1 PSI 250 5'x8' V Tefzel coated 316SS AgitD212 5000 GAL 316L SS 14psi/-1 PSI 250 9'x14' V D213 500 GAL HETRON 980 14psi/-1 PSI 220 4'x5' V D214 300 GAL Derakane 411 14psi/-1 PSI 180 3.5'x6'V D301 4000 GAL TFE Lined CS 2psi/-1psi 270 8'x10' V Loose liner. With AgitatorD302 4000 GAL 304L SS 14psi/-1psi 340 8'x10' V With Agitator D303 900 GAL 304L SS 30psi/FV 350 5'x8' V COLUMN BASE D304 750 GAL 304L SS 14psi/FV 250 4'x8' H D323 110,000 gal CS 10" wc/-6" wc 200 F 25.5'x29.5' V D401
A 1000 GAL 304 SS 14psi/-1psi 200 5'x7' V With Agitator D401
B 1000 GAL 304 SS 14psi/-1psi 200 5'x7' V With Agitator D402 200 GAL 304 SS 14psi/-1psi 340 3'x4' V With Agitator D403 200 GAL 304 SS 14psi/-1psi 340 3'x4' V With Agitator D405 1700 GAL 304 SS 14psi/-1psi 300 6'x8' V D501 2300 GAL 304 SS 14psi/-1psi 300 7'x8' V D508 20 GAL 304 SS 14psi/-1psi 300 2'x2' V D601 4000 GAL 304L SS 14psi/-1psi 250 8'x10' V With Agitator D602 4000 GAL 304L SS 14psi/-1psi 250 8'x10' V With Agitator D603 4000 GAL 304L SS 14psi/-1psi 250 8'x10' V With Agitator D606 120,000 GAL 304L SS +12"wc/-4"wc 250 25'x33' V With Side Mount AgitatorD608 120,000 GAL 304L SS +12"wc/-4"wc 250 25'x33' V With Side Mount AgitatorD609 26,000 GAL 304L SS +12"wc/-4"wc 300 15'x20' V With Side Mount AgitatorD701 20,000 GAL 304L SS +20"wc/-3"wc 250 16'x16' V D702 1200 GAL 304L SS 14psi/-1 PSI 250 5'x8' V D703 500 GAL 304L SS 14psi/FV 300 4'x5' V D704 500 GAL 304L SS 14psi/FV 300 3.5'x7' H D705 4000 GAL 304L SS 14psi/-1psi 250 8'x10' V With Agitator D706 300 GAL 304L SS 14psi/FV 300 3.5'x4' V D707 500 GAL 304L SS 14psi/FV 250 3.5'x7' H D801 5000 GAL CS 14psi/FV 250 8.5'x12' V With Agitator D802 200 GAL 304 SS 50 psi/FV 350 3'x4' H COLUMN BASE D803 200 GAL 304 SS 50 psi/FV 350 3'x4' V D804 900 GAL 304 SS 14psi/FV 250 5'x6' V D805 375 GAL 304 SS 150psi/FV 390 4'x4' H COLUMN BASE D806 200 GAL CS 150psi/FV 300 3'x4' H D807 5000 GAL CS 14psi/FV 250 8.5'x12' V D901 2000 GAL CS +20"wc/-6"wc 150 6.5'x8' V D904 100 GAL CS 14psi/FV 250 2.5'x3' V
R101 500 GAL ALLOY 20 14PSI/FV Jkt 100
psi 350 4'x5.5' V CS Jacketed with Agitator
Pennakem Custom Manufacturing
Page 25 of 27
R102 4000 GAL 316SS 14PSI/FV Jkt 100
psi 350 8'x10' V CS Jacketed with Agitator
R103 2000 GAL 316SS 14PSI/FV Jkt 100
psi 350 6.5'x8' V CS Jacketed with Agitator Pumps TAG
# CAPACITY MATRL SEAL
PURGE HP RPM TYPE B100 600 SCFM@5"wc FRP --- 1 Exhaust vent fan B101 1400 SCFM@9"wc FRP --- 5 Exhaust vent fan B213 3300 SCFM@ 5PSI CS NO 125 2213 BLOWER P101
A 75 GPM@100'TDH ALLOY 20 NO 7.5 1800 Pos Displac Dbl Mech SealP101
B 75 GPM@100'TDH ALLOY 20 NO 7.5 1800 Pos Displac Dbl Mech SealP102
A 75 GPM@130'TDH 316 SS NO 7.5 1800 Pos Displac Dbl Mech SealP102
B 75 GPM@130'TDH 316 SS NO 7.5 1800 Pos Displac Dbl Mech SealP103
A 150 GPM@290'TDH 316 SS NO 25 1800 Pos Disp Dbl Mech Seal VFD
P103B 150 GPM@290'TDH 316 SS NO 25 1800
Pos Disp Dbl Mech Seal VFD
P105 25 GPM @220'TDH 316 SS NO 15 3350 Sealless Mag drive Centrifugal
P107 5 GPM@100'TDH 316 SS NO 5 3350 Canned P201
A 150 GPM@60'TDH TFE Lined DI Yes 5 1800 Centrifugal, single mech seal
P201B 150 GPM@60'TDH TFE Lined DI Yes 5 1800
Centrifugal, single mech seal
P202A 30 GPM@70'TDH 316 SS NO 3 1800
Sealless Mag drive Centrifugal
P202B 30 GPM@70'TDH 316 SS NO 3 1800
Sealless Mag drive Centrifugal
P203 20 GPM@100'TDH 304 SS NO 2 3500 Sealless Mag drive Centrifugal
P204A 40 GPM@65'TDH 316 SS NO 5 3350
Sealless Mag drive Centrifugal
P204B 40 GPM@65'TDH 316 SS NO 5 3350
Sealless Mag drive Centrifugal
P206A 200 GPM@60'TDH TFE Lined DI NO 7.5 3500
Sealless Mag drive Centrifugal
P206B 200 GPM@60'TDH TFE Lined DI NO 7.5 3500
Sealless Mag drive Centrifugal
P208 80 GPM@130'TDH TFE Lined DI NO 5 3500 Sealless Mag drive Centrifugal
P209 50 GPM@60'TDH TFE Lined DI NO 3 3500 Sealless Mag drive Centrifugal
P210 90 GPM@75'TDH Tefzel Lined
CS NO 5 3550 Sealless Mag drive Centrifugal
P211 120 GPM@60'TDH Tefzel Lined
CS NO 5 3550 Sealless Mag drive Centrifugal
P212 100 GPM@125'TDH 316 SS NO 10 3550 Sealless Mag drive
Pennakem Custom Manufacturing
Page 26 of 27
Centrifugal
P213 90 GPM@125'TDH 316 SS NO 5 1800 Sealless Mag drive Centrifugal
P301A 50 GPM@65'TDH 316 SS NO 5 1800
Sealless Mag drive Centrifugal
P301B 50 GPM@65'TDH 316 SS NO 5 1800
Sealless Mag drive Centrifugal
P302A 30 GPM@90'TDH 316 SS NO 7.5 3350
Sealless Mag drive Centrifugal
P302B 30 GPM@90'TDH 316 SS NO 7.5 3350
Sealless Mag drive Centrifugal
P303A 480 GPM@90'TDH 316 SS NO 20 1800
Sealless Mag drive Centrifugal
P303B 480 GPM@90'TDH 316 SS NO 20 1800
Sealless Mag drive Centrifugal
P304 30 GPM@80'TDH 316 SS NO 7.5 3350 Sealless Mag drive Centrifugal
P401A 200 GPM@210'TDH 316 SS NO 20 3350
Sealless Mag drive Centrifugal
P401B 200 GPM@210'TDH 316 SS NO 20 3350
Sealless Mag drive Centrifugal
P403A 3 GPM@90'TDH TEFLON NO 0.75 --- Metweing Diaphraghm
P403B 3 GPM@90'TDH TEFLON NO 0.75 --- Metweing Diaphraghm
P405 50 GPM@60'TDH 316 SS NO 5 3500 Sealless Mag drive Centrifugal
P501 60 GPM@300'TDH 316 SS NO 40 3350 Sealless Mag drive Centrifugal
P504 10 GPM@228'TDH 316 SS NO Pos Displac Var Freq DriveP506 10 GPM@228'TDH 316 SS NO Pos Displac Var Freq Drive
P508
Nash Liquid Seal Ring Vacuum pump. 316 SS. 4 mm Hg Abs Press 10 1170
P601 100 GPM@250'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P602 100 GPM@250'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P603 100 GPM@250'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P606 100 GPM@300'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P608 100 GPM@300'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P609 100 GPM@300'TDH 316 SS NO 15 1750 Pos Displac Single Mech Seal
P610 12 GPM@125'TDH 316 SS NO 1.5 1750 Centrifugal, single mech seal
P701A 100 GPM@140'TDH 316 SS NO 15 3550
Sealless Mag drive Centrifugal
P701B 100 GPM@140'TDH 316 SS NO 15 3550
Sealless Mag drive Centrifugal
P702 25 GPM@100'TDH 316 SS NO 10 3350 Sealless Mag drive Centrifugal
P703 15 GPM@70'TDH 316 SS NO 5 3550 Sealless Mag drive
Pennakem Custom Manufacturing
Page 27 of 27
Centrifugal
P704 30 GPM@90'TDH 316 SS NO 7.5 3350 Sealless Mag drive Centrifugal
P705 15 GPM@120'TDH 316 SS NO 15 3550 Sealless Mag drive Centrifugal
P706 20 GPM@90'TDH 316 SS NO 7.5 3350 Sealless Mag drive Centrifugal
P708 15 GPM@70'TDH 316 SS NO 5 1800 Sealless Mag drive Centrifugal
P801 20 GPM@180'TDH 316 SS NO 15 3550 Sealless Mag drive Centrifugal
P803 25 GPM@120'TDH 316 SS NO 10 3550 Sealless Mag drive Centrifugal
P804 20 GPM@375'TDH 316 SS NO 40 3550 Sealless Mag drive Centrifugal
P806 20 GPM@100'TDH 316 SS NO 7.5 3550 Sealless Mag drive Centrifugal
P807 15 GPM@85'TDH 316 SS NO 7.5 3550 Sealless Mag drive Centrifugal
P810 15 GPM@75'TDH 316 SS NO 7.5 3350 Sealless Mag drive Centrifugal
P901 600 GPM@175'TDH DI NO 40 1750 Centrifugal, single mech seal
P902 P903
P904 200 GPM@150'TDH 316 SS NO 20 3550 Sealless Mag drive Centrifugal
Filters F401A Horizontal leaf centrifugal discharge Funda filter. 440 sq ft. 304SS. 100 psi/fv. 300 F F401B Horizontal leaf centrifugal discharge Funda filter. 440 sq ft. 304SS. 100 psi/fv. 300 F F606A Basket with 5u felt sleeve. 100 gpm, 150 psi, 304 SS. F606B Basket with 5u felt sleeve. 100 gpm, 150 psi, 304 SS. F608A Basket with 5u felt sleeve. 100 gpm, 150 psi, 304 SS. F608B Basket with 5u felt sleeve. 100 gpm, 150 psi, 304 SS.
Misc. M800 Solids Conveyor. 16000 lbs/hr. 3 hp. CS. M400 Filter hydraulic unit. 25 hp 1800 rpm X901 Water Chiller Refrigeration Unit. 262 tons. 600 gpm flow. Outlet temp 38 F. 120 hp 3600 rpm X907 Low Press Stm Gen. 483 sq ft. Shell 304SS, 100 psi/fv, 390F. Tube 304SS, 200 psi/fv, 390F
For additional information please contact Tom Colanero at 901-320-4071 or [email protected].