Custom Lockset Division: Design from the Inside Out Levers, … · 2020. 2. 19. · Custom Lockset...

Custom Lockset Division: Design from the Inside Out Levers, Knobs & Escutcheons

www.marksusa.com | 800.645.9445 | Fax: 631.225.6136

MARKS CUSTOM LOCKSET DIVISIONMarks USA Custom Lockset Division product is manufactured with the quality engineered mechanical locksets that carry our Lifetime Mechanical Warranty. These products are non-stocked due to the large array of both designs and finishes and thus require longer lead times and minimum order quantities. This catalogue is only a sampling of the designs that can be supplied. Standard mortise & tubular lock trim are usually stocked and are available in normal lead times.

Lifetime Mechanical Limited WarrantyMARKS USA warrants that its products are free from defects in materials and workmanship. This warranty is limited to the lifetime of the door on which our lock is installed. In the event our product does not conform to this warranty, MARKS USA will repair or replace the product free of charge. This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-MARKS products or parts. We reserve the right to make changes in materials, components or manufacturing methods. Liability under all warranties expressed or implied is limited to replacement of the defective goods. This warranty does not cover nor provide for the reimbursement or payment of incidental or consequential damages. Additionally, the company will not warrant ANSI A156.2 Grade 2 lever product installed in educational facilities and student housing.

Because common pin tumbler cylinders may be compromised by picking, drilling or key bumping, for applications where greater security is required, we created Marks USA HI-SECURITY™, constructed with multiple pin planes and sidebars, that are drill-, pick- and bump-resistant.

Table of Contents

Stainless Steel Cast Levers ................................................................................................2-14

Stainless Steel Tubular Levers..........................................................................................15-19

Standard Mortise & Tubular Lock Trim & Rose Styles ........................................................... 20

Custom Forged Brass Levers ................................................................................................ 21

Turnpieces ............................................................................................................................ 22

Custom Forged Brass Trim ................................................................................................... 23

Custom Escutcheon Plates ..............................................................................................24-26

Additional Custom Designs .............................................................................................27-28

ArchiTech™ Designer Wireless Access Control ..................................................................... 29

HI-SECURITY

5-1/2"

2-3/8"

4-7/16"

2-3/8"

5-9/16"

2-5/8"

5-5/16"

2-3/4"

SF003

SF005 SF006

SF004

5-1/8"

2-9/16"

4-23/32"

2-7/16"

SF001 SF002

5"

3-1/16"

5-5/16"

2-3/16"

SF007 SF008

STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFOR GRADE 1 MORTISE & TUBULAR LOCKSETS

4-11/16"

2-1/2"

SF009

5-1/8"

2-13/16"

SF010

5-15/16"

2-13/16"

SF011

4-5/8"

2-1/2"

SF012

MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USA Page 2

Custom Lockset Division Catalog 2013_Custom Locksets 2/12/13 10:12 AM Page 2

www.marksusa.com | 800.645.9445 | Fax: 631.225.6136 2

STAINLESS STEEL INVESTMENT CAST LEVER HANDLEFor Grade 1 Mortise & Tubular Locksets

MARKS USA • www.marksusa.com • 631-225-5400 • 1-800-526-0233 • Fax: 631-225-6136 • © 2013, Marks USAPage 3


4-13/16"

2-5/8"

SF014

4-1/2"

2-5/8"

SF013

4-3/16"

2-3/4"

SF015 SF016

5-1/8"

2-13/16"

SF018

4-15/16"

2-15/16"

SF017

5-11/16"

2-13/16"

SF019 SF020

5-1/2"

2-5/8"

5-5/16"

2-5/8"

5-5/16"

2-15/16"

SF021 SF022

5-5/16"

2-13/16"

SF023

5-5/16"

2-5/8"

SF024

4-13/16"

2-11/16"


3www.marksusa.com | 800.645.9445 | Fax: 631.225.6136



5"

2-23/32"

SF026

5"

2-15/16"

SF029

5-1/16"

2-1/2"

SF0314-3/4"

2-23/32"

SF030

5-1/8"

2-23/32"

SF032

5-5/16"

2-15/16"

SF033

5-5/8"

2-13/16"

SF034


5-5/16"2-23/32"

SF035A

5-5/16"

2-13/16"

SF025

5-5/16"

2-15/16"

SF027

5-5/16"

2-23/32"

SF035

5-1/8"2-13/16"

SF036





5-5/16"2-13/16"

SF037

5-5/16"

2-7/8"

SF038

5-5/16"2-13/16"

SF041

5-11/16"2-13/16"

SF043

5-5/16"2-13/16"

SF037A

5-3/8"

2-13/16"

SF040

5-5/16"

2-13/16"

SF042

5-1/8"

2-1/4"

SF044

SF045

4-5/8"

2-7/16"

SF046

5-1/8"

2-15/16"

SF047

5-5/16"

2-19/64"

SF048


4-23/32"

2-23/32"





5-11/16"

2-7/8"

SF057

5-1/8"

2-7/8"

SF058


5-1/8"

2-3/8"

SF053

5"

2-7/8"

SF056

5-11/16"

2-7/16"

SF054

5"2-3/32"

SF055

5-1/4"

2-5/16"

SF059

4-1/2"2-7/16"

SF060

5-5/32"2-15/16"

SF049

5-1/8"2-5/16"

SF051

4-23/32"

2-13/16"

SF050

5"

2-7/16"

SF061





5-1/16"

2-3/32"

SF062

4-21/64"

2-3/16"

SF071

5-1/8"

3"

SF067

5-3/16"

3-3/16"

SF0654-7/8"

2-5/8"

SF064

5-1/2"

2-9/16"

SF063

4-15/16"2-7/16"

SF068

4-1/2"2-3/16"

SF070

4-21/64"2-3/16"

SF073

4-21/64"2-9/16"

SF072

5-1/8"

2-3/4"

SF069


5-1/8"2-1/4"

SF074






4-15/16"

2-3/4"

SF082

4-7/8"

2-5/16"

SF0844-7/16"

2-1/8"

SF085

5-1/2"2-3/4"

SF086

4-21/64"

2-3/16"

SF075

4-5/8"2-13/16"

SF077

4-3/4"2-15/16"

SF080

4-11/16"2-3/8"

SF076

5-19/32"2-13/16"

SF078

4-27/32"2-3/4"

SF081

5-7/16"2-3/4"

SF083

5-1/2"

2-13/16"

SF087





SF095

4-23/32"2-7/16"

SF097

SF088

5-1/2"

2-3/16"

SF089

5-5/16"2-11/16"

SF093

5-1/8"2-13/16"

SF091

5-5/16"2-9/16"

SF090

5"2-13/16"

SF092

SF094

SF096

SF098

5-1/16"2-1/16"

5-1/8"2-7/16"

4-7/32"2"

5-9/32"2-3/32"


5-1/8"2-1/2"

SF099

6"2-11/16"






5-5/16"2-3/8"

4-11/16"2-1/2"

4-3/8"2-1/2"

5-13/64"2-21/32"

5-3/16"2-3/4"

5-15/16"

2-3/8"

SF101

SF103

SF105

SF107

SF109

SF100

SF102

SF104

4-1/2"2-3/16"

4-1/2"2-3/16"

6-7/64"2-5/8"

SF106

SF108

SF110

4-5/8"2-7/16"

4-9/16"2-5/8"

5-1/2"2-3/16"

SF111




5-5/16"2-13/16"

5-5/16"2-13/16"

5-1/8"2-7/8"

5-5/16"2-7/8"

5-13/16"2-11/16"

5-5/16"

2-13/16"

4-27/32"

2-7/16"

5-19/32"

2-13/16"

6"

2-13/16"

5-5/16"

2-9/16"

SF113

SF115

SF117

SF119

SF121

SF112

SF114

SF116

SF120

SF122

SF118



2-5/8"

5-9/32"2-13/16"

SF123

5-1/2"

2-3/16"






5"

2-5/8"

5-1/8"2-7/16"

5-3/16"2-5/8"

5-5/16"

2-13/16"

5-1/2"

3"2-5/8"

5-5/16"

2-13/16"

5-5/16"

2-13/16"

5-1/8"

2-13/16"

5-5/16"

2-13/16"

4-1/8"

SF125

SF127

SF130

SF132

SF134

SF126

SF128

SF131

SF133

SF135

3"

5-5/16"2-11/16"

5-1/8"2-5/8"

SF136 SF137





4-15/16"2-15/16"

5-15/64"

2-7/16"

5-23/64"

2-1/2"

5-25/64"

2-13/16"

8-1/16"

3-1/16"

5-9/32"

2-13/16"

5-5/64"2-3/4"

4-27/32"

2-15/16"

6-1/2"2-13/16"

SF138

SF140

SF142

SF145

SF147

SF139

SF141

SF144

SF146


5"

2-3/4"

SF149 SF150

4-15/16"2-15/16"

5-1/8"2-5/8"

SF148






SF151

SF153

SF155

SF157

SF160

LH23 LH32

SF161

SF152

SF154

SF156

SF158

5-1/8"2-7/16"

5-3/4"2-23/32"

5-1/2"

2-27/32"

4-21/32"2-7/16"

5-1/2"2-7/16"

5-11/16"

2-23/32"

5-5/32"2-9/16"

5-5/16"

3-3/8"

5-5/16"

2-1/2"

5-1/8"

2-9/16"

5-5/16"

2-1/2"

5"

2"





STAINLESS STEEL TUBULAR LEVERSFOR TUBULAR LOCKSETS

5-1/2"

SD001

5-5/16"

2-13/16"

SD002

5-5/16"

2-13/16"

5-5/16"

2-13/16"

SD002B

SD0045-5/16"

2-15/16"

SD003

5-5/16"

2-13/16"

SD005

4-23/32"

2-7/16"

SD006

2"

5-5/16"

2-13/16"

2-13/16"

SD002A

5-1/2"

2-13/16"

SD007

5-5/16"

2-13/16"

SD008

5-5/16"

2-13/16"

SD009

5-5/16"

2-13/16"

SD010



STAINLESS STEEL TUBULAR LEVERSFor Tubular Locksets



2-7/16"

SD011

5-5/16" 5-5/16"

2-13/16"

SD012

5-1/8"

2-13/16"

5-11/16"

2-13/16"

SD013 SD014

5"

2-13/16"

SD015

5"2-13/16"

SD015A

5-5/16"

2-13/16"

SD018

SD020

5-5/16"2-13/16"

SD019

SD0215-5/16"

2-13/16"

5-5/16"

2-13/16"

5-5/16"

2-13/16"

SD017SD0165-5/16"

2-13/16"

2-7/16"






2-13/16"

SD022

SD024

SD026

SD028

SD030

SD032

5-1/2"

2-13/16"

5-1/2"

2-5/8"5-5/16"

2-13/16"5-5/16"

2-13/16"5-1/2"

3-1/2"5-1/2"

5-1/2"2-13/16"

SD023

SD025

SD027

SD029

SD031

SD033

5-5/16"2-13/16"

5-5/16"2-13/16"

5-29/32"2-13/16" 2-7/16"

3-11/32"2-7/16" 3-29/32"7-23/32"

2-3/4"

2-13/16"5-25/64"






SD034 SD0355-5/16"

2-23/32"

5-5/16"

2-7/8"

5-5/16"

2-13/16"

5-5/16"2-13/16"

5-5/16"2-13/16"

5-5/16"2-5/8"

4-15/16"2-5/8"

4-27/32"2-5/8"

5-5/16"2-13/16"

5-13/16"2-13/16"

5-5/16"2-13/16"

5-29/32"3-3/16"

SD038

SD040

SD042

SD046 SD047

SD043

SD039

SD041

SD036 SD037

2-13/16"






5-5/16"2-1/2"

4-15/16"

3"

5-1/2"

3"

5-1/8"

2-5/8"

5-29/32"2-3/32"

5-1/2"3"

5-5/16"2-13/16"

5-25/64"2-11/16"

5-5/16"2-23/32"

SD051

SD053

SD056

SD058

SD049SD048

SD050

SD052

SD054

SD057

SD062 SD063

SD064

SD066

4-23/32"

2-9/16"

5-3/16"

2-13/16"

5-5/16"

2-23/32"

5-1/2"2-7/8" 2-9/32"

5-5/16"2-11/16"





STANDARD MORTISE & TUBULAR LOCK TRIM& ROSE STYLES

RROOuuNNDD 1100

RROOSSEE RRRR RROOSSEE RRww RROOSSEE RRSS RROOSSEE RRxx

ppllaazzaa 8822

BBaallll 2200//3300

MMaaDDiiSSOONN 5522

DDaayyttoonn 8833MMOONNaaccOO 5577

ccRREESSccEENNTT 8866TTOOwwNNEE 7722

aaMMEERRiiccaaNN 9922

4"

2-1/2"

7/16"

2-9/16"

2-1/2"

2-1/4"

7/16"

2-9/16"

TTiiTTaaNN 9966

4-1/2"7/16"

2-9/16"

2-7/8"OOMMNNii 7788

4-1/4"7/16"

2-9/16"

2-5/8"

MMaaxxwwEEllll 7777

4-1/4"7/16"

2-9/16"

2"

7/16"

2-9/16" 2-3/16"

3"

1/2"

7/16"

2-9/16"

3"

4-1/2"

4-1/2"7/16"

2-9/16"

2-3/4"

2-1/2"

7/16"

2-9/16"

2-3/4"

1/2"

4-1/2"7/16"

2-9/16"

3-1/8"

4"

2-1/2"

7/16"

2-1/4"

2"

4-1/2"7/16"

2-9/16"

2-3/4"

7/16"

2-9/16"

2"

3-3/4"

2-9/16"

7/16"

2-9/16"

7/16"

2-9/16"

7/16"7/16"

2-1/4"

RROOSSEE RRQQ

7/16"

2-1/4"

EEcclliippSSEE 6600

SSTTaaNNhhOOppEE 55664444

NOTE: Roses are available in a wide variety of finishes



STANDARD MORTISE & TUBULAR LOCK TRIM & ROSE STYLES


CUSTOM FORGED BRASS LEVERS

5321 5601

4-3/4"

2-7/16"

4-3/8"

2-1/2"

4-3/16"

3-15/16"

5671

3-1/2"

2-13/16"

5681

PL-AL

PL-AR

4-1/2"

2-5/16"

5636

4-1/4"

2-5/16"

5678

5"

2-5/16"4-5/8"

2-7/16"

5-5/8"

2-11/16"

5-5/8"

2-11/16"

5348 BA-L





TURNPIECES

1-3/4"

1-3/16"

2-5/16"

1-7/16"

OPTION CODE T4Base Metal: Brass & Stainless Steel

OPTION CODE T5Base Metal: Stainless Steel


OPTION CODE T3Base Metal: Zinc


OPTION CODE T1Base Metal: Brass & Stainless Steel

OPTION CODE T7Base Metal: Brass




15/16"

15/16"

27/32"

1-3/8"

1-5/8"

15/16"

1-1/2"

15/16"

1-3/4"

15/16"

1-15/16"

1-11/16"

1-3/4"

15/16"

1-15/16"

1-11/16"



TURNPEICES


CUSTOM FORGED BRASS TRIM

CUSTOM 1

19"

3"

2-1/4"

7-5/8"

4"

8"

CUSTOM 2





CUSTOM ESCUTCHEON PLATES

FIGURE 5FIGURE 3

FIGURE 2FIGURE 1

FIGURE 4

17"

3"

17"

3"

19"

2-3/4"

16-7/8"

3"

17"

2"






FIGURE 10FIGURE 9FIGURE 8

17"

2-3/4"

17"

2" 2"

17"

12"

2-1/2"

FIGURE 6 FIGURE 7

2-3/4"

17"






FIGURE 15

FIGURE 14FIGURE 13

10-1/2"

2-1/2"

9-1/4"

2-1/4"

8"

2-1/2"

8"

2"

8"

2"

8"

2"

FIGURE 11 FIGURE 12

FIGURE 16




53 16

21 2

51 8

27 16

47 16

21 2

51 8

25 16

47 8

29 16

411 16

25 16

412

178

438

11516

5

29 16

5

23 4


Additional Custom Designs

5322 5641

5637 5647

5691 5690

5679 5697

LH22 WS600

43 16

23 4

13 4

13 8

29 16"

716"

21 16"

27 16"

21516

212

101 4

25 8

81 2

27 16


Additional Custom Designs

Option Code T15

WP02

9633 9691

W04

5697

(left) Marks USA custom escutcheon plate and lever used throughout the Trump® International Hotel in Washington D.C.

• All Applications and Doors - Cylindrical and Mortise models for wood and metal doors, for new and existing applications, with wireless surface mount or mortised-in electronics and batteries. Surface-Mount or Mortised-in Electronics and Battery Pack

• Customize To Match Any Aesthetic Look, For Every Décor - Over 300 locks, levers, roses and finishes to choose from, durable ANSI/BHMA Grade 1 hardware. Over 300 locks, levers, roses and finishes available in mortise version.

• Future-Proof Multi-Technology Access ID Credentials Replace Cumbersome Keys – HID® Prox, Mag Stripe, Smart Cards, PIV, keyfobs, enabled iLock® App and remote buttons. 5000 Users, 500 Scheduled Events & 40,000 Event Audit Trail

• Emergency Lock-Down option via lock, button, keyfob or server (where networked). (Global Unlock via server too.)

• Proven, Low Maintenance, Wireless Installation And Unsurpassed Battery-Life with Advanced Power- Saver circuit, with years of use in even high-traffic areas, using off-the-shelf AA batteries, 3 year battery life, typ. using advanced Power-Saver circuit.

• Auto-Deadbolt option for automatic keyless locking of deadbolt upon exiting, ideal for residential applications

• Flexible System Programming Locally using a USB Gateway or remotely across a wireless network (using free Alarm Lock DL-WINDOWS Windows- based software) or integrated on an enterprise class IT environment, in realtime, using LENEL

• Networking Choices – Choose 802.11 or Ethernet network, with wireless encrypted bi-directional gateways, in which many locks communicate to a single gateway, expander, or use a wireless RF USB Gateway equivalent. For entry door applications and the like, used in conjunction with strikes and mags, use with Networx NetPanels. Or, use as a single-door control, in real time, as part of the IT-Network environment, with Continental Access CA4K®, Lenel OnGuard® Integrated Access Control & Video Security or Software House Connected Partner Program® Platforms.‡

ArchiTech Networx Features:

MORTISED NETWORX

CONTROL UNIT

PROXIMITY READER

(OVAL AND RECTANGULAR)

DOOR CONTACT MAGNET

(TWO TYPES)

SURFACE-MOUNTED NETWORX

CONTROL UNIT

DOOR CONTACT SENSOR

PROXIMITY READER


DOOR CONTACT MAGNET

(TWO TYPES)


CONTROL UNIT DOOR

CONTACT SENSOR

PROXIMITY READER


(rear) (front)

DOOR CONTACT MAGNET

(TWO TYPES)


CONTROL UNIT DOOR

CONTACT SENSOR

PROXIMITY READER

(OVAL AND RECTANGULAR) (outside)

(inside)

DOOR CONTACT MAGNET

(TWO TYPES)

Standard Configurations


Designer Wireless Access Control Standalone, Networked, or Enterprise

ArchiTech™ is the best of both worlds, combining infinite combinations of Marks Custom Lock, Grade 1 styles, hardware choices and architectural finishes, with sister Division Alarm Lock’s Trilogy® Networx™ Lock Wireless Access Control electronics, class-leading for low-maintenance, longest battery life and breadth of line for every door type. Advanced electronics can be concealed within the door, or neatly on back, and are available in cylindrical, mortise, narrow stile and exit trim, matching in look and function, whether the application is standalone PIN/Prox or Multi-Technology ID Card access, networked and controlled from the server, or centrally-managed in realtime, including area-specific or global lockdown in seconds, with enterprise class software solutions with integrated platforms, including Continental CA4K®, Software House® or Lenel®. Easily networked for every building’s construction, Architech Access Locks offer a choice of technologies, Ethernet, WiFi &/or POE Gateways & Extenders, each controlling over 60 locks. And, for every access control client, from multi-dwelling residential to campus, and institutions or corporate security, these keyless access control locks, support a multi-user hierarchy for service staff, users and managers, as well as a vast variety of ID Credentials, including cards, fobs and mobile Smart App.

Plus, for coordinating the look for an entire building, Marks offers identical matching interior tubular locksets for passage, privacy and closets (dummy locksets). Visit Marks’ www.designalock.com website and create, spec and share your own vision.

Concealed electronics

Cylindrical; Surface Mounted Electronics (back box not shown)

Mortise; Surface Mounted Electronics

Mortised-in electronics and batteries

Mag Stripe Reader

Keypad


Designer Wireless Access Control Standalone, Networked, or Enterprise

Verizon 12:55 PM 79%

The Key is Your Smartphone & More Secure Technology: Use the iLock® App to unlock your Networx ArchiTech™ Bluetooth® Series Door Lock in seconds!

iLock, the easy smartphone mobile solution for unlocking your Trilogy® ArchiTech Bluetooth Series Designer Access Control Locks from up to 30 feet away with any smart device, without the need to carry cumbersome ID cards or keys. Password protected access is secure through the use of Bluetooth LE® and proprietary encryption. For even greater security users can add an optional passcode, entered on their phone App.

Coming soon: emailable digital eKeys for guests or service temporary access, too.

iLock App is available from both iTunes and the Google Play Store

Networx Configuration Options (multi-technology ID card/credential readers available in multiple shapes & colors)

Wired Gateway POE Gateway 802.11 Gateway

Networx Gateways Options (no Panel or PIM required)1 Networx Gateway controls up to 63 wireless Networx locks (repeaters also available for extending range).

Create your own custom lock looks www.designalock.comCreate, spec & share a custom lock vision for any space or building with www.designalock.com interactive site for trying out various lock looks for locks inside and out. Ideal for Architects, Designers and Building Operating Management who want their access control and locking “look” to be as welcome as the security they provide.

365 Bayview Ave. • Amityville, NY 11701 • USA • 800-645-9445 • Fax: [email protected] • www.marksusa.com

Marks USA is a Division of NAPCO Security Technologies, Inc. (NASDAQ:NSSC): • NAPCO • Alarm Lock • Continental Access • Marks USAArchiTech, Trilogy, Networx and iLock are trademarks of NAPCO Security. Other trademarks listed are properties of their respective companies. Lifetime warranty limited to mechanical lock (excluding finish). See full details Pg 1 &/or at www.marksusa.com

©Marks USA, 2020 A768 (2.20)

ABOUT US: MARKS USA was established in 1977 to serve a growing demand for a mortise lock manufacturing company who would satisfy the needs of an expanding market. Since then, the product line has grown to include residential and commercial locksets to meet and exceed the most stringent UL and BHMA/ANSI specifications. In 1989, the Custom Lockset Division was created to accommodate customers with special requirements of either lock function or design. Custom locksets have been developed for numerous municipal and commercial applications, including those shown.. These are various custom locksets developed to accommodate our customers needs. This is only a sampling of our solutions. We at the Custom Lockset Division welcome the opportunity to respond to special applications requiring a custom engineered lock product. Marks USA makes compliance with the Buy American Act (BAA) and American Recovery & Reinvestment Act (ARRA) easy, as an American manufacturer of quality door hardware products with manufacturing facilities in Long Island, NY.

Custom Lockset Division: Design from the Inside Out Levers, … · 2020. 2. 19. · Custom Lockset...

Documents

Transcript of Custom Lockset Division: Design from the Inside Out Levers, … · 2020. 2. 19. · Custom Lockset...