Curriculum Vitae YUNN-LIN HWANG, Ph.D.hwang.nfu.edu.tw/English/cv-hwang.pdf · Curriculum Vitae...

1

Curriculum Vitae

YUNN-LIN HWANG, Ph.D.

PERSONAL INFORMATION Work Address:

National Formosa University

Department of Mechanical Design Engineering

64, Wen-Hua Road, Huwei

Yunlin 63201, Taiwan, R. O. C.

Telephone: +886-56315339

Fax: +886-56363010

E-mail: [email protected] or [email protected]

PRESENT ACADEMIC RANK AND POSITION

Distinguished Professor, National Formosa University, Department of Mechanical Design

Engineering

EDUCATION

Ph.D., Mechanical Engineering; 1992

University of Illinois at Chicago, Chicago, Illinois, U.S.A.

Dissertation: Recursive Projection Methods in Flexible Multibody Dynamics

Advisor: Professor Ahmed A. Shabana MS., Mechanical Engineering; 1987

University of Colorado at Boulder, Boulder, Colorado, U.S.A. B.Sc., Mechanical Engineering; 1984

Tamkang University, Tamsui, Taipei, Taiwan, R.O.C.

HONORS/AWARDS 1. Outstanding Students Award, Tamkang University, 1984

2. Excellent Young Investigator Award, Yunlin County, 1993

3. National Yunlin Polytechnic Institute Travel Award (1995)

4. Excellence in Engineering teaching Award, National Formosa University (2000)

5. Excellent Paper Award of the 5th Precision Manufacturing Congress of the Society of

6. Manufacturing Engineers (2006)

7. Graduate-School 2nd prize on 2011 Intelligent Machine-tools topic competitions (2011)

8. Excellence Award on 1st Xutai Science and Technology Paper Award and High Speed

Spindle Innovation Application Implementation Contest (2015)

9. Excellence Award on 2nd Xutai Science and Technology Paper Award and High Speed

Spindle Innovation Application Implementation Contest (2016)

PREVIOUS PROFESSIONAL POSITIONS AND APPOINTMENTS Graduate Teaching Assistant

Department of Mechanical Engineering, The University of Colorado at Boulder, Boulder,

Colorado, 1986-1987

Department of Mechanical Engineering, The University of Illinois at Chicago, Chicago,

Illinois, 1988-1992

Graduate Research Assistant

mailto:[email protected]:[email protected]

2

Department of Mechanical Engineering, The University of Illinois at Chicago, Chicago,

Illinois, 1990-1992

Associate Professor

National Yunlin Polytechnic Institute, Department of Mechanical Design Engineering,

Yunlin, Taiwan, 1992-1998

Department Chairman

National Yunlin Polytechnic Institute, Department of Mechanical Design Engineering,


Associate Professor

National Huwei Institute of Technology, Department of Mechanical Design Engineering,


Associate Professor

National Formosa University, Department of Mechanical Design Engineering,


Visiting Professor

University of Oregon, Department of Human Physiology,

Eugene, Oregon, U.S.A., 2008/7/1-2008/12/31

Professor


Yunlin, Taiwan, R.O.C., 2008-now

Distinguished Professor


Yunlin, Taiwan, R.O.C., 2019-now

PROFESSIONAL PERMANENT MEMBERSHIPS AND SOCIETIES

1. American Society of Mechanical Engineers

2. Chinese Society of Mechanical Engineers

3. Taiwan Society of Tribology Technology

4. Taiwan Association of Engineering and Technology Innovation

5. Society of Theoretical and Applied Mechanics of the Republic of China

6. Chinese Society of Sound and Vibration EDUCATIONAL ACTIVITIES

Courses Taught at National Formosa University

Graduate courses:

Mechanical Vibrations, Dynamics of Multibody Systems, Nonlinear System Analysis,

Dynamics of Machinery Systems, Design and Analysis of Mechanical Systems

Undergraduate courses:

Statics, Dynamics, Kinematics and Dynamics of Machinery, Theory of Mechanisms,

Homepage Design and Image Processing, Mechanical Vibration Measurement and Analysis,

Computer Network, Engineering Program Design, 3D Dynamic Graphing, Computer Graphic

Application, Introduction of Finite Element Analysis, Mechanism Design, Theory of Robotics,

Computer-Aided Sketch, Gear Design, Mechanical Design, Mechanics of Materials,

Thermodynamics, Mathematics of Engineering, Mechanical Engineering Experiment (I): Solid

Mechanics, Materials of Mechanical Engineering, Machine Tools, Analysis and Experiment of

Dynamic Systems

3

Research Trainees at National Formosa University Ph.D. Students:

1. Van-Thuan Truong, Ph.D. (2015): The Dynamic Analysis and Control of Multibody

Systems

2. Thi-Na Ta, Ph.D. (2019): The Investigation of Frictional Contacts on Dynamic Analysis,

Control, and Optimization of Rigid-Flexible Coupled Multi-Body Systems

3. Jung-Kuang Cheng, Ph.D. (Candidate): The Dynamic Analysis and Research of Multi-

body Vehicle Systems

Master Students:

1. Zhen-You Wei, MS (2008): Inverse dynamics analysis and control for deformable

robotic manipulators

2. Hsin-Hua Chen, MS (2009): The Vibration Analysis and Research of Rotor Dynamic

Systems

3. Tzu-Shi Yang, MS (2009): The gait analysis and simulation of biped robot

4. Chih-Wei Liao, MS (2010): Computer aided engineering in the structural design and

flexible mechanism analysis of the door-type machine tools

5. Guan-Lun Hwang, MS (2010): Dynamic Analysis and Application in Beam and Plate

Structure Products with CAE Technology

6. Wen-Chen Chiang, MS (2011): Dynamic Analysis and Study of Machine Center

Structure Effected by Cutting Processing

7. Chi-Wei Chou, MS (2011): The investigation of simulating spectrum analysis

instrument by using NI hardware and software

8. Zhao-Yu Liu, MS (2011): The Dynamic Control Simulation and Research of the

Human Motion Systems

9. Yu-Chang Chang, MS (2011): The investigation in the dynamic stiffness of the

structures and mechanisms of double column machining center

10. Guang-Yi Fan, MS (2012): Dynamic structural characteristic analysis, testing and

improved design of the CNC machine tool

11. Cheng-Yu Yang, MS (2012): CAE Technology Used in the Dynamic Analysis of Wind

Turbine

12. Yan-Hau Hwang, MS (2012): LS-DYNA Simulation, Analysis and Application

13. Duc Nhat Chu, MS (2012): Using Nonlinear Recursive Formulation on Dynamic

Analysis of Multi-body Systems

14. Shi-Hua Zhuang, MS (2012): Dynamic simulation and structural analysis of the CD-

ROM drive

15. Xuan Mai Nguyen, MS (2013): The dynamic control analysis of biomimetic

humanoid robot system

16. Pei-Hsuan Lai, MS (2013): The Dynamic Characteristic Analysis of Rigid-Flexible

Coupling Structures of Virtual Machine-Tool

17. Chun-Wei Chang, MS (2013): The Dynamic Contact Analysis and Simulation of

Virtual Machine-Tool

18. Cheng-Yang Song, MS (2013): The Application of CAE Fluid-Solid Coupling

Analysis on Large-Scale Wind Turbine

19. Thanh-Dat Pham, MS (2014): The Dynamic Analysis and Control of Industrial

Robotic Manipulators

20. Hong-Jhih Ke, MS (2014): The Computer-Aided Design and Analysis of Mechanical

Energy Transform Machine

21. Xian-Ming Xu, MS (2014): The Computer-Aided Design and Dynamic Analysis of

CNC Machine Tools

22. Tei-Wei Chen, MS (2014): The computer-aided design and analysis of precision

4

carbide CNC band saw

23. Guan-Lin Lai, MS (2014): The Human Multi-Body Dynamic Analysis and Research

24. Thi-Na Ta, MS (2014): The walking gait simulation and control of biomimetic

humanoid robot system

25. Bo-Ming Lin, MS (2015): The Computer-Aided Design and Analysis of High

Efficiency CNC Type Steel Manufacturing Process Plant Export Band Saw Machine

26. Sin-Hao Liao, MS (2015): The Computer-Aided Design and Dynamic Analysis of

Large Door-Type CNC Machine Tools

27. Yu-Xuan Liu, MS (2015): The Multibody Dynamic Analysis of 3-axis CNC Machine

Tools

28. Cao-Sang Tran, MS (2016): Dynamic Analysis and Control of Hydraulic Machine

System and Industrial Robotic Manipulator

29. Van-Minh Dang, MS (2016): The Modal and Dynamic Analysis of CNC Machine

Tools System

30. Jian-Fu Lai, MS (2016): The Computer-Aided Design and Dynamic Analysis of

Vertical CNC Machine Tools

31. Wei-Sin Lin, MS (2017): The Computer-Aided Design, Analysis and Research of

Power Chuck and Mechanical Particle Systems

32. Jie-Cih Peng, MS (2017): The Rigid-body and Flexible-body Dynamic Analysis of

Vertical CNC Machine Tools

33. Yi-Ling Liu, MS (2017): The Rigid-Body and Flexible-Body Dynamic Analysis of

CNC Double Column Machining Centers

34. Siang-Syun Lai, MS (2017): The Computer-Aided Design and Vibration Modal

Analysis of Ultra-High-Speed Cutting Intelligent CNC Band Saw and Double-Stroke

Mechanism

35. Yu-Wei Wu, MS (2018): Order Tracking Analysis and Modal Experiment of Multi-

body Rotor Dynamic Systems

36. Jia-Hong Lin, MS (2018): Using Computer Aided Engineering Analysis Softwares on

the Application of Multibody Dynamic Systems

37. Yu-Siang Jhong, MS (2018): The Computer-Aided Design and Dynamic Analysis of

Vertical Machining Centers

Book Editor

1. Area Editor for Dynamics of Multibody Systems, John Wiley & Sons, New York, 1st ed., 1992.

2. The Applications of RecurDyn Software in Multibody Dynamics, Wu-Nan Publication Company, 1st edition, 2009.

3. The General Introduction and Practical Training of Mechanical Vibrations, Wu-Nan Publication Company, 1st edition, 2009.

4. Multibody Dynamics Analysis and Application Based on RecurDyn V9, Wu-Nan Publication Company, 1st edition, 2019.

Invited Reviewer for Scientific Journals

ASME Journal of Vibration and Acoustics, ASME Journal of Mechanical Design, Int.

Journal of Mechanism and Machines Theory, Int. Journal of Computer-Aided Design,

Journal of Material Science Forum, Journal of Nonlinear Mechanics, Int. Journal of

Communications in Numerical Methods in Engineering, Journal of the Chinese Society of

Mechanical Engineers, Int. Journal for Numerical Methods in Engineering, Int. Journal of

Vibroengineering, Int. Journal of Advances in Mechanical Engineering, Journal of Key

Engineering Materials, Journal of Applicd Mechanics and Materials, Journal of Mechanics

5

Editor for Scientific Journals

Guest editor - "Microtribology, Adhesion and Surface Engineering 2018" in Journal

of Micromachines (SCI)

Guest editor - "Tribology of Materials and Analysis" in Journal of Materials (SCI)

Lead guest editor - Special Collection on "Advances in Multibody Dynamics and

Vibrations" in Journal of Advances in Mechanical Engineering (SCI)

Guest editor - Special Issue "Microtribology, Adhesion and Surface Engineering" in

Journal of Micromachines (SCI)

Lead guest editor - Special Issue on “Advances in Engineering Tribology Technology”

in Journal of Advances in Mechanical Engineering (SCI)

Lead editor - Journal of Applied Mechanics and Materials - Engineering Tribolody

and Applied Technology 2017 (EI)

Lead editor - Journal of Applied Mechanics and Materials - Applied Technology and

Tribology (EI)

Lead editor - Journal of Key Engineering Materials - Engineering Tribology and

Applied Technology 2016 (EI)

Lead editor - Journal of Key Engineering Materials - Tribology Engineering 2014 (EI)

Grant Reviewer

National Science Council of Taiwan - Solid Mechanics,

Ministry of Economic of Taiwan - Technology Development Program,

Ministry of Economic of Taiwan - Small Business Innovation Research

National and International Service

Section Co-chair, the Fourth Symposium on Multibody Dynamics and Vibration, ASME

2003 Conference, Chicago, USA, September 2-6, 2003.

Member of Scientific Advisory Committee and Section co-Chair, 2005 International

Conference on Advanced Manufacture, Taipei, Taiwan, December 2-5, 2005.

Section Co-chair, International Conference on Science & Technology: Application in

Industry & Education, Pulau Pinang, Malaysia, December 8-10, 2006.

Member of International Scientific Advisory Committee and Section co-Chair, the Ninth

International Conference on Automation Technology, Taipei, Taiwan, June 13- 15, 2007.

Section Co-chair, Asia Pacific Conference on Optics Manufacture 2007, Hong Kong,

China, January 11-13, 2007

Technical Chairman, The First International Conference on Engineering and Technology

Innovation 2011, Kenting, Taiwan, November 11-15, 2011.

Technical Chairman, The Second International Conference on Engineering and

Technology Innovation 2012, Kaoshiung, Taiwan, November 2-6, 2012.

Technical Chairman, The International Applied Science and Precision Engineering

Conference 2013, Sun Moon Lake, Natou, Taiwan, October 18-22, 2013.

http://www.mdpi.com/journal/micromachines/special_issues/ICETAT_2018http://www.mdpi.com/journal/micromachines/special_issues/ICETAT_2018http://www.mdpi.com/journal/materials/special_issues/Tribology_Materialshttp://journals.sagepub.com/page/ade/call-for-papers/special-issues/advances_in_multibody_dynamicshttp://journals.sagepub.com/page/ade/call-for-papers/special-issues/advances_in_multibody_dynamicshttp://www.mdpi.com/journal/micromachines/special_issues/microtribology_adhesionhttp://www.mdpi.com/journal/micromachines/special_issues/microtribology_adhesionhttp://journals.sagepub.com/doi/full/10.1177/1687814015624304http://journals.sagepub.com/doi/full/10.1177/1687814015624304https://www.scientific.net/AMMhttps://www.scientific.net/AMMhttps://www.scientific.net/KEM.739.-7https://www.scientific.net/KEM.739.-7https://www.scientific.net/KEM.642.-1https://www.scientific.net/KEM.642.-1http://www.scientific.net/KEM.642/bookhttp://www.scientific.net/KEM.642/book

6

RESEARCH INTERESTS Dynamics of Multibody Systems, Mechanical Vibrations and Modal Analysis, Computer-Aided

Design, Computer-Aided Engineering, Biomechanics, Walking Robot, Machine Tools

Technology

RESEARCH GRANT AWARDS: Awarded Extramural Research Grants

“Dynamic decoupling methods for the analysis of closed-loop flexible multibody systems”, National Science Council of Taiwan, NSC 83-0117-C-150-063-E, 8/1/1993-7/31/1994, NT$168,000.

Role: Principal Investigator

“Computer-aided design and manufacture of rotor mechanism utilizing the geometric

differential formulation”, National Science Council of Taiwan, NSC 84-2212-E-150-020 &

NSC 85-2212-E-150-002 , 8/1/1994-7/31/1996, NT$430,700.


“Recursive mapping method using in the computer-aided dynamic analysis of rigid and

deformable multibody systems”, National Science Council of Taiwan, NSC 86-2212-E-150-

002 , 8/1/1996-7/31/1997, NT$215,000.


“Dynamic analysis of spatial linkages mechanism”, National Science Council of Taiwan,

NSC 84-2212-E-150-020 & NSC 87-2212-E-150-011 , 8/1/1997-7/31/1998, NT$384,700.


“Dynamic modeling and analysis of closed-loop flexible mechanisms”, National Science

Council of Taiwan, NSC 90-2212-E-150-012 , 8/1/2001-7/31/2002, NT$164,100.


“Dynamic and modal analysis of vegetable food machine”, National Science Council of

Taiwan, NSC 92-2622-E-150-008-CC3 , 6/1/2003-5/31/2004, NT$529,600.


“Dynamic and modal analysis of vegetable food machine”, National Science Council of

Taiwan, NSC 92-2622-E-150-008-CC3 , 6/1/2003-5/31/2004, NT$529,600.


“Structure dynamic measurement and analysis of food machine”, National Science Council

of Taiwan, NSC 93-2622-E-150-005-CC3 , 5/1/2004-4/30/2005, NT$714,100.


“The dynamic simulation and cycle life test of electric scooter and power wheelchair”,

National Science Council of Taiwan, NSC 94-2622-E-150-003-CC3 , 5/1/2005-4/30/2006,

NT$664,000.


7

“Nonlinear recursive approach for dynamic analysis of flexible mechanical systems”,

National Science Council of Taiwan, NSC 94-2212-E-150-020 , 8/1/2005-7/31/2006,

NT$478,100. Role: Principal Investigator

“Dynamic simulation and vibration modal analysis of multi-function auto-filled machine”,

National Science Council of Taiwan, NSC 95-2622-E-150-012-CC3 , 5/1/2006-4/30/2007,

NT$672,000. Role: Principal Investigator

“CAD, CAM and CAE of multi-function roaster machine”, Ministry of Education of

Taiwan, 5/1/2006-12/31/2006, NT$360,500. Role: Principal Investigator

“Nonlinear recursive method for the inverse dynamic analysis and control of flexible

mechanical systems”, National Science Council of Taiwan, NSC 95-2221-E-150-018,

8/1/2006-7/31/2007, NT$542,000. Role: Principal Investigator

“The CAD, CAM and CAE of LCD skew-angle control mechanism with supported

structure”, National Science Council of Taiwan, NSC 96-2622-E-150-014-CC3 , 5/1/2007-

4/30/2008, NT$537,000. Role: Principal Investigator

Awarded Intramural Research Grants

1. National Formosa University Research Award 2004

“Dynamic analysis and vibration control of flexible structures: Beam structure products”

2. National Formosa University Research Award 2007

“New formulations, applications and experiments in multibody dynamics”

BIBLIOGRAPHY

Full Length, Peer-Reviewed, Original Articles (published & in press)

1. Shabana A. A., Hwang Y. L., and Wehage R. A., 1992, ”Projection Methods in Flexible

Multibody Dynamics. Part I: Kinematics,” International Journal for Numerical Methods in

Engineering, Vol. 35, pp. 1927-1939.

2. Wehage R. A., Shabana A. A., and Hwang Y. L., 1992, ”Projection Methods in Flexible

Multibody Dynamics. Part Ⅱ: Dynamics and Recursive Projection Methods,” International

Journal for Numerical Methods in Engineering, Vol. 35, pp. 1941-1966.

3. Hwang Y. L., and Shabana A. A., 1992, ”Dynamic of Flexible Multibody Space Cranes Using

Recursive Projection Methods,” Computers & Structures, Vol. 43, No. 3, pp. 549-563.

4. Shabana A. A., and Hwang, Y. L., 1993, ”Dynamic Coupling Between the Joint and Elastic

Coordinates in Flexible Mechanism Systems,” International Journal of Robotics Research, Vol.

12, No. 3, 1993, June, pp. 299-306.

5. Hwang, Y. L., and Shabana A. A., 1994, ”Decoupled Joint-Elastic Coordinate Formulation for

8

the Analysis of Closed-Chain Flexible Multibody Systems,” ASME Journal of Mechanical

Design, Vol. 16, pp. 961-963.

6. Hwang, Y. L., 1996, ”Dynamic decoupling methods for the analysis of closed-loop flexible

multibody systems”, Journal of Technology, Vol. 11, No. 3, pp. 355-364.

7. Hwang, Yunn-Lin and Wang, Yueh-Chen, 2002, ”Recursive method for the analysis of open-

loop flexible multibody systems”, Journal of National Huwei Institute of Technology, Vol. 5,

pp. 97-106.

8. Hwang, Yunn-Lin, 2003, ”Kinematic analysis of spatial deformable mechanisms using

Newton-Euler iteration method”, Journal of National Huwei Institute of Technology, Vol. 6, pp.

89-98.

9. Hwang, Yunn-Lin, 2003, ”The vibration measurement and modal analysis of spatial open-

loop deformable mechanisms”, MM Mechanical Technology Magazine, 2003, October, No.

224, pp. 148-155.

10. Hwang, Yunn-Lin, 2004, ”The validation of transverse vibration modal properties for

cantilever beam”, Journal of National Formosa University, Vol. 1, pp. 147-154.

11. Hwang, Yunn-Lin, 2005, ”The vibration modal test and analysis of beam structure products”,

Mechatronics Magazine, 2005, May, No. 81, pp. 136-140.

12. Hwang, Yunn-Lin, 2005, “A new approach for dynamic analysis of flexible manipulator

systems,” Journal of Nonlinear Mechanics, Vol. 40, No. 6, pp. 925-938.

13. Hwang, Yunn-Lin, 2006, “Nonlinear recursive formulation for kinematic and dynamic

analysis of robotic manufacturing systems,” Journal of Material Science Forum, Vols. 505-

507, pp. 553-558.

14. Hwang, Yunn-Lin, and Huang, Shen-Jenn, 2006, “Kinematic and Dynamic Analysis for

Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method,” Journal

of Material Science Forum, Vols. 505-507, pp. 1015-1020.

15. Hwang, S. J., Hwang, Y. L., and Lee, B. Y., 2006, “Using the Taguchi-Grey approach to

optimize high speed end milling with multiple performance characteristics,” Journal of

Material Science Forum, Vols. 505-507, pp. 835-840.

16. Hwang, Yunn-Lin, 2006, “Recursive Newton-Euler formulation for dynamic manufacturing

analysis of open-loop robotic systems,” International Journal of Advanced Manufacturing

Technology, Vol. 29, No. 5, pp. 598-604.

17. Hwang, Yunn-Lin, 2006, “Nonlinear recursive method to solid deformable structure dynamic

problems,” International Journal of Communications in Numerical Methods in Engineering,

Vol. 22, No. 9, pp. 975-1002.

18. Hwang, Yunn-Lin, 2006, “Kinematic and dynamic analysis of open-loop mechanical systems

using nonlinear recursive formulation,” International Journal of Communications in

Numerical Methods in Engineering, Vol. 22, No. 12, pp. 1129-1153.

19. Hwang, Yunn-Lin, 2006, “Dynamic recursive decoupling method for closed-loop flexible

9

mechanical systems,” Journal of Nonlinear Mechanics, Vol. 41, No. 10, pp. 1181-1190.

20. Hwang, Yunn-Lin, 2008, “Decoupling joint and elastic accelerations in deformable

mechanical systems using nonlinear recursive formulations,” International Journal for

Numerical Methods in Engineering, Vol. 73, Issue 2, pp. 273-295.

21. Hwang, Yunn-Lin, 2008, “Analysis of mechanical vibrations and forces using amalgamated

decoupling method in multibody mechanical systems,” International Journal of

Communications in Numerical Methods in Engineering, Vol. 24, No. 11, pp. 1553-1566.

22. Hwang Yunn-Lin, 2008, “Solid deformable multibody dynamic problems in precision

manufacturing systems,” Key Engineering Materials, Vols. 364-366, pp. 873-878.

23. Hwang, Yunn-Lin and Wei, Zhen-You, 2008, “Dynamic analysis and control of 3D flexible

mechanisms using nonlinear recursive method in multibody automation systems,” Journal of

the Chinese Society of Mechanical Engineers, Vol. 29, No. 2, pp. 121-127.


manufacturing systems,” Journal of Key Engineering Materials, Vols. 364-366, pp. 873-878.

25. Hwang Yunn-Lin, 2008, “Analysis of mechanical vibrations and forces using amalgamated

decoupling method in multibody mechanical systems,” International Journal of

Communications in Numerical Methods in Engineering, Vol. 24, No. 11, pp. 1553-1566.

26. Hwang Yunn-Lin, Hwang Shen-Jenn, Huang Zi-Gui, Lin Ming-Tzong, Mao Yen-Chien,

Wang Pei-Yu, 2010, “Computational analysis of multibody dynamic systems using nonlinear

recursive formulation,” Journal of Key Engineering Materials, Vols. 419-420, pp. 289-292.

27. Hwang Yunn-Lin, Hwang Shen-Jenn, 2010, “Solving for dynamic problems in flexible

manufacturing systems,” Journal of Advanced Materials Research, Vols. 156-157, pp. 1501-

1504.

28. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2011, “Circular and noncircular

conjugate tooth profiles generated by a novel rack-cutter,” Journal of Applied Mechanics and

Materials, Vols. 63-64, pp. 948-951.

29. Hwang Yunn-Lin and Hwang Shen-Jenn, 2011, “Dynamic analysis and control of multibody

systems using nonlinear combination methods,” International Journal for Numerical Methods

in Biomedical Engineering, Vol. 27, Issue 10, pp. 1583-1610.

30. Hwang Yunn-Lin, Gau Wei-Hsin, Lin Wen-Huang, Hwang Shen-Jenn, Chen Chien-Hsin,

2012, “Using nonlinear recursive formulation for the kinematic analysis of human

biomechanical systems,” Journal of Advanced Materials Research, Vols. 482-484, pp. 938-941.

31. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2012, “Finite element model updating of

micromachined torsion structures using experimental eigendata,” Journal of Vibro-

Engineering, Vol. 14, Issue 3, pp. 994-1001.

32. Chen Chien-Hsin, Hwang Yunn-Lin, Hwang Shen-Jenn, 2013, “Non-Newtonian Fluid Flow

and Heat Transfer in Microchannels,” Journal of Applied Mechanics and Materials, Vols. 275-

277, pp. 462-465.

10

33. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2013, “Dynamic Characteristics of New

Tooth Profiles Gear Generated By a Novel Rack-Cutter,” Journal of Applied Mechanics and


34. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2013, “Dynamic Characteristics and Finite

Element Model Updating of Micromachined Torsion Structures,” Journal of Applied

Mechanics and Materials, Vols. 284-287, pp. 1831-1835.

35. Chen Chien-Hsin, Hwang Shen-Jenn, Hwang Yunn-Lin, 2013, “Electroosmotic Flow and

Heat Transfer in Microchannels: A Closed Form Solution,” Journal of Applied Mechanics

and Materials, Vol. 319, pp. 462-467.

36. Hwang Shen-Jenn, Li Shin-Tang, Hwang Yunn-Lin, Chen Chien-Hsin, 2013, “Study on

Scroll Profile Design Using Involute of Elliptic for Scroll Compressor,” Journal of Applied

Mechanics and Materials, Vol. 319, pp. 622-628.

37. Hwang Yunn-Lin, Chien-Hsin Chen, Hwang Shen-Jenn, Lin Wen-Huang, Nguyen Xuan Mai,

2013, “The dynamic analysis of humanoid robot system,” Journal of Applied Mechanics and


38. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2014, “Optimization of Circular Diamond

Saw Blades with Annular Slots,” Journal of Applied Mechanics and Materials, Vols. 479-480,

pp. 289-293.

39. Hwang Yunn-Lin, Cheng Jung-Kuang, 2014, “The Dynamic Analysis and Simulation of

Electric Scooter,” Journal of Applied Mechanics and Materials, Vols. 479-480, pp. 365-368.

40. Hwang Yunn-Lin, Cheng Jung-Kuang, 2014, “The dynamic behavior and modal analysis of

electric scooter,” Journal of Vibro-Engineering, Vol. 16, Issue 2, pp. 689-696.

41. Gau Wei-Hsin, Chen Kun-Nan, Hwang Yunn-Lin, 2014, “Model Updating and Structural

Optimization of Circular Saw Blades with Internal Slots,” Journal of Advances in Mechanical

Engineering, Volume 2014, Article ID 546496. (SCI)

42. Hwang Yunn-Lin, Van-Thuan Truong, 2015, “DYNAMIC ANALYSIS AND CONTROL OF

MULTI-BODY MANUFACTURING SYSTEMS BASED ON NEWTON-EULER

FORMULATION,” International Journal of Computational Methods, March 2015, Vol. 12, No.

02, 18 pages.

43. Hwang Yunn-Lin, Cheng Jung-Kuang, Truong Van-Thuan, 2014, “Computer-Aided Dynamic

Analysis and Simulation of Multibody Manufacturing Systems,” Journal of Applied

Mechanics and Materials, Vols. 764-785, pp. 757-761.

44. Chen Kun-Nan, Ueng Wen-Der, Hwang Yunn-Lin, 2015, “A New Procedure for Structural

Fault Estimation Using a Prescribed Eigen-structure,” Journal of Applied Mechanics and

11


45. Hwang Yunn-Lin, Truong Van-Thuan, 2015, “A Synchronous Approach for Numerical

Simulation of Machine Tools,” Key Engineering Materials, Vol. 642, pp. 317-322.

46. Chen Kun-Nan, Ueng Wen-Der, Hwang Yunn-Lin, 2015, “Sequential eigen-assignment

technique for structural damage identification,” Journal of Vibro-Engineering, Vol. 17, Issue 3,

pp. 1232-1241.

47. Hwang Yunn-Lin, Ta Thi-Na, Cheng Jung-Kuang, 2016, “The Friction Effects for Contact

Force Analysis of Three Axes CNC Machine Tool,” Key Engineering Materials, Vol. 739, pp.

12-17.

48. Hwang Yunn-Lin, Ta Thi-Na, Tran Cao-Sang, 2018, “The Kinematic and Dynamic Analysis of

Hydraulic Control System Based on the Lagrangian Force Method,” International Journal of

Computational Methods, January 2018, Vol. 15, No. 1, 18 pages.

http://dx.doi.org/10.1142/S021987621850041Xhttp://dx.doi.org/10.1142/S021987621850041X

12

Peer-reviewed Conference Papers

1. Hwang, Y. L., and Shabana, A. A., 1992, “Decoupling Joint and Elastic Accelerations in

Flexible Multibody Vehicle Dynamics”, Proceedings of CSME (Canadian Society of

Mechanical Engineer) FORUM 1992, Montreal, Canada, June 1-4, 1992.

2. Hwang, Yunn-Lin, 1993, “Dynamic Decoupling Methods Between the Joint and Elastic

Coordinates in Flexible Mechanical Systems,” Proceedings of 10th Chinese Mechanical

Engineering Conference, pp. 345-354, Taiwan.

3. Hwang, Yunn-Lin, 1993, “Decoupling Methods in Flexible Multibody Dynamics”,

Proceedings of 1993 ASME International Computers in Engineering Conference, San

Diego, California, USA, August 8-12, 1993, pp. 93-96, Taiwan.

4. Hwang, Yunn-Lin, 1994, “Computer-aided design and manufacture of rotor mechanism

utilizing the geometric differential formulation”, Proceedings of National Science Council

of Taiwan, Hsin-Ju, Taiwan.

5. 黃運琳，2002，"撓性開迴路機械系統的動力分析"，中華民國力學學會第二十六屆

力學研討會論文摘要集， Paper No. L006. (NSC 87-2212-E-150-011)

6. Hwang Y. L., 2003, “Recursive Method for the Dynamic Analysis of Open-Loop

Flexible Multibody Systems”, Proceedings of the Fourth Symposium on Multibody

Dynamics and Vibration, ASME2003 Conference, Paper No. 48368, Chicago, U.S.A.,

September 2-6, 2003. (NSC 90-2212-E-150-012)

7. 黃運琳，林育信，2004，"樑結構產品的振動模態特性驗證"，中華民國 2004 精密機

械與製造技術研討會論文摘要集，Paper No. 9321. (NSC 92-2622-E-150-008-CC3)

8. Hwang Yunn-Lin, Gau Wei-Hsin, 2004, “DYNAMIC RECURSIVE METHOD FOR

THE FLEXIBLE MULTIBODY SYSTEMS”, Proceedings of the second Asian

Conference on Multibody Dynamics (ACMD 2004), Paper No. 100022, pp. 104-111,

Olympic Parktel, Seoul, Korea, August 2-4, 2004. (NSC 90-2212-E-150-012)

9. 黃運琳，林育信，李俊漢，葉權寬，李景成，陳峻宏，2004，"封閉迴路撓性機構的

動力分析"，中國機械工程學會第二十一屆全國學術研討會論文集 C.固力與設計

， Paper No. C0501094, pp. 2695-2700. (NSC 92-2622-E-150-008-CC3)

10. Yunn-Lin Hwang, 2005, “Nonlinear recursive formulation for kinematic and dynamic

analysis of robotic manufacturing systems”, 2005 International Conference on

Advanced Manufacture, Paper No. H002, Taipei, Taiwan. (NSC 90-2212-E-150-012)

11. Yunn-Lin Hwang, Shen-Jenn Huang, 2005, “Kinematic and Dynamic Analysis for

Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method”,

2005 International Conference on Advanced Manufacture, Paper No. P034, Taipei,

Taiwan. (NSC 94-2212-E-150-020)

12. S. J. Hwang, Y. L. Hwang, B. Y. Lee, 2005, “Using the Taguchi-Grey approach to

optimize high speed end milling with multiple performance characteristics”, 2005

13

International Conference on Advanced Manufacture, Paper No. L021, Taipei, Taiwan.

13. 黃運琳，林育信，2005，"簡支樑結構產品的振動分析"，2005 中華民國振動與噪音學

術研討會論文摘要集， Paper No. C8. (NSC 93-2815-C-150-012-E)

14. 黃運琳，葉權寬，李景成，林育信，2005，"食品加工機的振動與模態分析"，2005 中

華民國振動與噪音學術研討會論文摘要集， Paper No. B11. (NSC 93-2622-E-150-005-

CC3)

15. 黃運琳，周旭陽，林哲瑋，邱朝慶，翁祖賢，黃文彬，陳彥伯，黃維秋，2005，"雙

固定端樑結構產品的振動模態分析"，中國機械工程學會第二十二屆全國學術研討會

論文集 C.固力與設計-結構與振動， Paper No. C3-010. (NSC 93-2622-E-150-005-

CC3)

16. 黃運琳，周旭陽，林哲瑋，邱朝慶，翁祖賢，黃文彬，陳彥伯，黃維秋，2005，"食

品機械的動力分析與動態模擬"，第八屆機構與機器設計學術研討會論文集，Paper

No. C06009, pp. 520-527. (NSC 93-2622-E-150-005-CC3)

17. 黃運琳，劉嘉進，邱朝慶，陳彥伯，黃文彬，黃維秋，2006，“電動代步車的電腦輔

助工程分析”, 第十四屆全國自動化科技研討會論文集，Paper No. K03. (NSC 94-

2622-E-150-003-CC3)

18. 劉嘉進，黃運琳，徐政裕，2006，“使用 CAD/CAE/CAM 加速射出成型模之開

發”，第十四屆全國自動化科技研討會論文集， Paper No. K04.

19. 黃運琳，陳志詳，邱朝慶，黃維秋，黃文彬，陳彥伯，2006，”電動代步車的動態應

力模擬與振動模態分析” ，第十四屆中華民國振動與噪音工程學術研討會論文集，

Paper No. C10_44, pp. C60-C69. (NSC 94-2622-E-150-003-CC3)

20. 黃運琳，王慧綺，吳柏毅，林乘鵬，柯忠志，陳冠廷，馮昶欽，劉嘉進，2006，”

懸臂平板結構產品的振動模態分析”，第十四屆中華民國振動與噪音工程學術研討會

論文集，Paper No. D8_54, pp. D52-D59. (NSC 94-2212-E-150-020)

21. Hwang Yunn-Lin, 2006, “Nonlinear recursive approach for the dynamic analysis and

simulation of flexible automation mechanical systems”, Paper No. 0021a, pp. 359-366,

Proceedings of 2006 ISFA, 2006 International Symposium on Flexible Automation,

Osaka, Japan, July 10-12, 2006. (NSC 94-2212-E-150-020)

22. 魏禎佑，黃運琳，邱朝慶，2006，”電動代步車的機構動態與結構模態分析”，第五

屆精密製造學術研討會論文集，Paper No. B3_000009, pp. 951-957. (NSC 94-2622-E-

150-003-CC3)「實務專題製作與成果競賽組第二名」。

23. 黃運琳，王慧綺，吳柏毅，林乘鵬，柯忠志，陳冠廷，馮昶欽，2006，"立式 CNC 工

具機之結構動態剛性分析"，中國機械工程學會第二十三屆全國學術研討會論文集 C.

固力與設計，Paper No. C3-040. (NSC 95-2622-E-150-012-CC3)

24. 黃運琳，童景隆，2006，"晶片表面黏著載帶快速成型機的動力分析與動態模擬"，中

國機械工程學會第二十三屆全國學術研討會論文集 C.固力與設計， Paper No.

C5-005. (NSC 95-2815-C-150-006-E)

14

25. 謝文祥，黃運琳，彭千誠，陳宗毅，2006，"仿生水母縮放推進機構之撓性運動模擬

"，中國機械工程學會第二十三屆全國學術研討會論文集 C.固力與設計， Paper

No. C1-003. (NSC 93-2212-E-150-028)

26. 劉嘉進，黃運琳，楊湘琪，陳建安，張國達，2006，"搪桿細長比之研究"，中國機械

工程學會第二十三屆全國學術研討會論文集 D.III，Paper No. D10-005.

27. Hwang Yunn-Lin, 2006, “DYNAMIC ANALYSIS METHOD FOR THE FLEXIBLE

MULTIBODY SYSTEMS IN ENGINEERING EDUCATION”, Paper No. 91,

Proceedings of 2006 International Conference on Science & Technology: Application in

Industry & Education, Pulau Pinang, Malaysia, December 8-10, 2006. (NSC 95-2221-E-

150-018)


manufacturing systems,” Paper No. 216TW, Proceedings of Asia Pacific Conference on

Optics Manufacture 2007 (APCOM2007), Hong Kong, China, January 11-13, 2007.

(NSC 95-2221-E-150-018)

29. Hwang Yunn-Lin, Wei Zhen-You, 2007, “Analysis of mechanical vibrations and forces

using amalgamated decoupling method in multibody automation systems,” Paper No.

CAMD 15, Proceedings of the Ninth International Conference on Automation

Technology (Automation2007), June 13-15, 2007, Taipei, Taiwan. (NSC 95-2221-E-150-

018)

30. 魏禎佑，黃運琳，2007，"車載式探照燈受風壓之結構設計分析"，2007ANSYS/Fluent

年度應用研討會論文集(2007/11/8-2007/11/9)，Paper No. 10, 台北世貿中心。

31. 黃運琳，魏禎佑，2007，"撓性機械臂之逆向動力學分析與控制"，中國機械工程學會

第二十四屆全國學術研討會論文集(2007/11/23-2007/11/24)，Paper No. B10-0016, 桃園

中原大學。 (NSC 95-2221-E-150-018)

32. 黃運琳，林伯煒，柯耀涵，林立駿，魏書繁，2007，"懸臂板產品之振動量測與模態

分析 "，中國機械工程學會第二十四屆全國學術研討會論文集 (2007/11/23-

2007/11/24)，Paper No. B11-0017, 桃園中原大學。 (NSC 95-2622-E-150-012-CC3)

33. 黃運琳，魏禎佑，2007，"疊代分析法運用於 3D 撓性機械臂之逆向動力學分析與控制

"，第十屆全國機構與機器設計學術研討會論文集(2007/11/30)，Paper No. I03, 台中中

興大學。

34. 黃運琳，林伯煒，柯耀涵，林立駿，魏書繁，2007，"拉伸試驗機台之振動量測與模

態分析"，第十屆全國機構與機器設計學術研討會論文集(2007/11/30)，Paper No. F06,

台中中興大學。

35. 黃運琳，魏禎佑，陳信樺，楊子羲，2007，"電動輪椅之動態應力量測與振動模態分

析"，2007 年彰雲嘉大學校院聯盟論文集(2007/12/20)，pp. 34-39，國立虎尾科技大

學。(NSC 94-2622-E-150-003-CC3)

36. 黃運琳，陳信樺，2007，"牽引機的排氣系統受外力激振響應之研究"，中華民國力學

15

學會第三十一屆力學研討會論文集(2007/11/21-2007/11/22)，Paper No. H15，義守大

學。 (NSC 95-2622-E-150-012-CC3)

37. 黃運琳，王士銘，康銘儀，張欽宇，劉昭雨，2008，"平面與空間結構的動態剛性分

析"，中國機械工程學會第二十五屆全國學術研討會論文集(2008/11/21-2008/11/22)，

Paper No. B10-06 (CSME25-330), 彰化大葉大學。 (NSC 96-2622-E-150-014-CC3)

38. 黃運琳，陳信樺，楊子羲，2009，”轉子動態系統振動量測之信號處理分析”，第

十七屆中華民國振動與噪音工程學術研討會論文集(2009/6/6)，Paper No. D-09, pp.

368-374，北台灣科學技術學院。 (NSC 95-2221-E-150-018)

39. 黃運琳，王威竣，楊政育，黃彥豪，范光儀，2009，”平板與箱型冷氣之動態剛性分

析”，第十七屆中華民國振動與噪音工程學術研討會論文集(2009/6/6)，Paper No. D-

05, pp. 340-345，北台灣科學技術學院。(NSC 96-2622-E-150-014-CC3)

40. 吳松澤，王培郁，黃運琳，2009，"嬰兒安全座椅之結構強度動態衝擊分析"，中華民

國 2009精密機械與製造科技研討會論文集(2009/5/23-2009/5/24)， Paper No. G46，墾

丁福華大飯店。 (NSC 97-2622-E-150-005-CC3)

41. Hwang Yunn-Lin, Hwang Shen-Jenn, Huang Zi-Gui, Lin Ming-Tzong, Mao Yen-Chien,

Wang Pei-Yu, 2009, “Computational analysis of multibody dynamic systems using

nonlinear recursive formulation,” Paper No. NTU153, Proceedings of 2nd International

Conference on Advanced Design & Manufacture (ADM2009), Harbin, China,

September 24-26, 2009. (NSC 95-2221-E-150-018)

42. 黃運琳，廖志維，黃冠倫，江文楨，2009，"電動車輛之動態模擬與振動模態分析"，

中華民國第十四屆車輛工程學術研討會論文集(2009/10/30)，Paper No. A06，國立虎尾

科技大學。(NSC 96-2622-E-150-014-CC3)

43. 黃運琳，楊子羲，廖志維，劉昭雨，林泓伯，2009，"二足機器人的步態控制、模擬

與分析"，中華民國力學學會第三十三屆力學研討會論文集(2009/11/13-2009/11/14)，

Paper No. E1-144，苗栗國立聯合大學。(NSC 95-2221-E-150-018)

44. 黃運琳，陳信樺、黃冠倫、周志委，2009，"轉子動態系統振動之分析與研究"，中國

機械工程學會第二十六屆全國學術研討會論文集(2009/11/20-2009/11/21)，Paper No.

B10-006, 台南成功大學。 (NSC 96-2622-E-150-014-CC3)

45. Huang Zi-Gui, Hwang Yunn-Lin, Wang Pei-Yu, Mao Yen-Chieh, 2009, “TUNABLE

BAND GAPS OF ACOUSTIC WAVES IN TWO-DIMENSIONAL PHONONIC

CRYSTALS WITH RETICULAR BAND STRUCTURES”, Proceedings of ASME

International Mechanical Engineering Congress & Exposition (IMECE2009), Paper No.

13102, Lake Buena Vista, Florida, U.S.A., November 13-19, 2009. (NSC 97-2218-E-150-

006)

46. 黃運琳，黃冠倫，周志委，2010，”運用雷射位移計量測及分析樑結構產品的動態特

性”，第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12)，Paper No. C-

149，明志科技大學。(NSC 98-2221-E-150-046)

16

47. 黃運琳，宋正揚，張晉睿，陳宇青，湯佶勳，2010，”平板結構產品的動態特性分

析”，第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12)，Paper No. I-

149，明志科技大學。(NSC 98-2622-E-150-080-CC3)

48. 黃運琳，王威竣，楊政育，黃彥豪，范光儀，2010，”箱型冷氣之動態剛性與噪音分

析”，第十八屆中華民國振動與噪音工程學術研討會論文集(2010/6/12)， Paper No.

I-143，明志科技大學。 (NSC 98-2815-C-150-009-E)

49. 黃運琳，王威竣，楊政育，黃彥豪，范光儀，2010，"平板之振動模態分析及箱型冷

氣機之動態剛性與噪音分析” , 第十八屆全國自動化科技研討會論文集(2010/6/25-

2010/6/26)，Paper No. D01-0020, pp. 1018-1025，中原大學。 (NSC 98-2815-C-150-

009-E)

50. Hwang Yunn-Lin, Gau Wei-Hsin, 2010, “USING NONLINEAR RECURSIVE

METHOD FOR THE DYNAMIC ANALYSIS OF OPEN-LOOP FLEXIBLE

MULTIBODY SYSTEMS”, Proceedings of the 5th Asian Conference on Multibody

Dynamics (ACMD 2010), Paper No. 56670, Kyoto, Japan, August 22-26, 2010. (NSC 95-

2221-E-150-018 & NSC 98-2622-E-150-080-CC3)

51. Hwang Yunn-Lin, Hwang Shen-Jenn, 2010, “Solving for dynamic problems in flexible

manufacturing systems”, Proceedings of the 2010 International Conference on

Advances in Materials and Manufacturing Processes (ICAMMP2010), Paper No. P640,

Shenzhen, China, November 6-8, 2010. (NSC 99-2221-E-150-003)

52. 黃運琳，劉昭雨，周志委，2010，"撓性機械臂之逆向動力學分析與控制"，中華民國

力學學會第三十四屆力學研討會論文集(2010/11/19-2010/11/20)，台灣雲林，Paper No.

E2009，國立雲林科技大學。 (NSC 95-2221-E-150-018)\

53. 黃運琳，林文煌，許育翰，林建廷，林文煥，張浚瑋，2010， "羽球練習機的機構設

計與運動分析"，中華民國力學學會第三十四屆力學研討會論文集 (2010/11/19-

2010/11/20)，台灣雲林，Paper No. J0034，國立雲林科技大學。(NSC 98-2622-E-150-

080-CC3)

54. 黃運琳，陳宇青，宋正揚，張晉睿，湯佶勳，2010，"等效懸臂樑結構的動態剛性分

析"，中華民國第十五屆車輛工程學術研討會論文集(2010/11/26)，Paper No. A-013，

台南私立南台科技大學。(NSC 92-2622-E-150-008-CC3)

55. 黃運琳，周志委，劉昭雨，2010，"農用機械車輛系統受外力激振響應之研究"，中國

機械工程學會第二十七屆全國學術研討會論文集(2010/12/10-2010/12/11)，Paper No.

BB0-016, B-動力與控制組論文集，pp. 803-808，國立台北科技大學。 (NSC 98-2622-

E-150-080-CC3)

56. Liu Zhao-Yu, Jou Chih-Wei, Chang Yu-Chang, Hwang Yunn-Lin, 2010, “Using

Recursive Formulation for Dynamic Analysis of Open-Loop Deformable Multibody

Manufacturing Systems”, Proceedings of International Conference on Manufacturing

and Engineering Systems (ICMES 2010), Paper No. 289, pp. 97-102, Tainan, Taiwan,

17

R. O. C., December 16-18, 2010. (NSC 98-2221-E-150-046)

57. Li Shin-Tang, Hwang Shen-Jenn, Hwang Yunn-Lin, 2010, “Parametric design of the

cross sections and rapid prototyping of scroll compressor”, Proceedings of International

Conference on Manufacturing and Engineering Systems (ICMES 2010), Paper No. 284,

pp. 446-451, Tainan, Taiwan, R. O. C., December 16-18, 2010.

58. 黃運琳，范光儀，黃彥豪，莊世樺，2011，”平板結構之動態特性分析及驗證”，第

十九屆中華民國振動與噪音工程學術研討會論文集(2011/6/25)，Paper No. B-06, pp.

73-80，大葉大學。 (NSC 98-2221-E-150-046)

59. 黃運琳，楊政育，張裕昌，2011，”工具機切削動態行為之研究與模擬”，第十九屆

中華民國振動與噪音工程學術研討會論文集(2011/6/25)，Paper No. D-07, pp. 177-

183，大葉大學。(NSC 98-2622-E-150-080-CC3)

60. Tsai Yi-Hung, Hwang Shen-Jenn, Hwang Yunn-Lin, 2011, “Circular and noncircular

conjugate tooth profiles generated by a novel rack-cutter,” Proceedings of International

conference on Mechanical Engineering Industry and Manufacturing Engineering 2011

(MEIME2011), Paper No. 363, Beijing, China, P. R. O. C., July 23-24, 2011.

61. Hwang Yunn-Lin, Gau Wei-Hsin, 2011, “The dynamic characteristic analysis of the

constrained beams,” Proceedings of 7th International Symposium on Precision

Engineering Measurement and Instrumentation (ISPEMI2011), Paper T-QET-004,

Lijiang, Yunnan, China, P. R. O. C., August 7-11, 2011.

62. 黃運琳，劉昭雨，賴佩瑄，2011，”人體運動系統之動態控制模擬與研究”，2011 國

際生物力學研討會論文集(2011/10/20-2011/10/21)，Paper No. TSB2011-015，國立交通

大學。 (NSC 99-2622-E-150-003)

63. 黃運琳，周志委，宋正揚，2011，”以 NI 軟硬體模擬頻譜分析儀之研究”，第十四

屆全國機構與機器設計學術研討會論文集(2011/11/4)，Paper No. E-014，國立中央大

學。 (NSC 99-2622-E-150-023-CC3)

64. 黃運琳，莊世樺，朱德日，2011，”挖土機的履帶系統的動力分析與研究”，中華民

國第十六屆車輛工程學術研討會論文集(2011/11/11)，Paper No. A1-013，國立台北科

技大學。 (NSC 98-2221-E-150-046)

65. 黃運琳，黃苡婷，王彥昇，王偉帆，陳笛瑋，2011，”2D 與 3D 結構的振動與模態分

析”，中華民國第十六屆車輛工程學術研討會論文集(2011/11/11)，Paper No. A1-

014，國立台北科技大學。 (NSC 98-2622-E-150-080-CC3)

66. 黃運琳，楊政育，張浚瑋，2011，”板材彎曲成形行為與參數設計的研究”，中華民

國力學學會第三十五屆全國力學會議論文集(2011/11/18-2011/11/19)，Paper No. F1-

009，國立成功大學。(NSC 98-2622-E-150-080-CC3)

67. 黃運琳，范光儀，莊世樺，2011，"拓樸最佳化運用於工具機動態結構之分析與應用

"，中國機械工程學會第二十八屆全國學術研討會論文集 (2011/12/10-2011/12/11)，

Paper No. C08-006，國立中興大學。 (NSC 99-2622-E-150-023-CC3)

18

68. 黃運琳，黃彥豪，范光儀，楊政育，2011，"材料拉伸試片之應力應變分析模擬"，中

國機械工程學會第二十八屆全國學術研討會論文集(2011/12/10-2011/12/11)，Paper No.

C10-006，國立中興大學。 (NSC 98-2622-E-150-080-CC3)

69. Hwang Yunn-Lin, Gau Wei-Hsin, Lin Wen-Huang, Hwang Shen-Jenn, Chen Chien-

Hsin, 2012, “Using nonlinear recursive formulation for the kinematic analysis of human

biomechanical systems,” Proceedings of the International Conference on Advances in

Materials and Manufacturing Processes (ICAMMP2012), Paper No. V9540, Xiamen,

China, P. R. O. C., March 27-30, 2012. (NSC 99-2221-E-150-003)

70. 黃運琳，范光儀，賴佩瑄，2012，”基於硬軌接觸面參數的工具機動態結構特性分

析”，第二十屆中華民國振動與噪音工程學術研討會論文集(2012/6/16)，Paper No. D-

06，大葉大學。(NSC 100-2622-E-150-026-CC3)

71. 黃運琳，楊政育，宋正揚，2012，”CAE 技術運用於風力發電機的動態分析研究”，

2012台灣風能學術研討會論文集(2012/12/19)，Paper No. D-10，國立交通大學。(NSC

100-2622-E-150-026-CC3)

72. 賴佩瑄，黃運琳，范光儀，2012，”工具機結構動態特性分析與模擬”，中華民國力

學學會第三十六屆全國力學會議論文集(2012/11/16-2012/11/17)，Paper No. Z-015，國

立中央大學。( NSC 100-2622-E-150-026-CC3)

73. Chen Chien-Hsin, Hwang Yunn-Lin, Hwang Shen-Jenn, 2012, “Non-Newtonian Fluid

Flow and Heat Transfer in Microchannels,” Proceedings of the International

Conference on Applied Mechanics and Materials (ICAMM2012), Paper No. MM1640,

Sanya, China, P. R. O. C., November 24-25, 2012. (NSC 101-2221-E-150-025)

74. 黃運琳，張浚瑋，阮春梅，2012，"疊代法運用於工業機器人動力學的分析研究與實

驗"，中國機械工程學會第二十九屆全國學術研討會論文集(2012/12/7-2012/12/8)，

Paper No. 1954，國立中山大學。 (NSC 100-2221-E-150-006)

75. Chen Chien-Hsin, Shen-Jenn Hwang and Yunn-Lin Hwang, 2013, “Electroosmotic Flow

and Heat Transfer in Microchannels: A Closed Form Solution,” Proceedings of the 2013

2nd International Conference on Chemical, Mechanical and Materials Engineering

(CMME 2013), Melbourne, Australia, January 20-21, 2013. (NSC 101-2221-E-150-025

and NSC 100-2221-E-150-075)

76. Hwang Yunn-Lin, Chen Chien-Hsin, Hwang Shen-Jenn, Lin Wen-Huang, Mai Nguyen

Xuan, 2013, “The dynamic analysis of humanoid robot system,” Proceedings of the

2013 International Conference on Mechatronics, Robotics and Automation (ICMRA

2013), Paper No. RA4187, Guangzhou, China, P. R. O. C., June 13-14, 2013. (NSC 101-

2511-S-150-002)

77. 黃運琳，賴佩瑄，張浚瑋，張文順，2013，”虛擬工具機剛柔耦合結構之動態特性分

析”，第二十一屆中華民國振動與噪音工程學術研討會論文集(2013/6/29)，Paper No.

D-0016，國立台北科技大學。(NSC 100-2622-E-150-026-CC3 & NSC 101-2622-E-150-

19

019-CC3)

78. 黃運琳，陳政平，蔡亞辰，黎育翔，蘇鴻林，2013，”1D 與 2D 結構之動態特性分析

及驗證”，第二十一屆中華民國振動與噪音工程學術研討會論文集(2013/6/29)，Paper

No. D-0017，國立台北科技大學。(NSC 101-2622-E-150-019-CC3)

79. 黃運琳，宋正揚、柯竑志、林仁輝，2013，”流固耦合 CAE 分析應用於大型風力發

電機”， 2013 第一屆台灣磨潤科技研討會論文集(2013/10/6)，Paper No. 50，劍湖山

世界(國立虎尾科技大學主辦)。(NSC 101-2622-E-150-019-CC3 & NSC 102-2218-E-

150-001)

80. Yunn-Lin Hwang, Van-Thuan Truong, Cheng-Yang Chen, Fang-Chun Chou, Thanh-

Dat Pham, Thi-Na Ta, 2013, “Dynamic simulation and control of machine tools,”

Proceedings of Automation 2013 The 12th International Conference on Automation

Technology, Paper No. I004, Kun Shan University, Tainan, Taiwan, R. O. C., November

1-2, 2013. (NSC 101-2622-E-150-019-CC3)

81. 黃運琳、賴冠霖、林文煌，2013，"人體多體動力學之分析與研究"，中國機械工程學

會第三十屆全國學術研討會論文集(2013/12/6-2013/12/7)，Paper No. 1763，國立宜蘭

大學。 (NSC 101-2511-S-150-002)

82. Chen Chien-Hsin, Hwang Yunn-Lin, 2014, “Viscous Heating Effects in

Electrokinetically Driven Flow of Non-Newtonian Fluids Through a Slit Microchannel,”

Proceedings of the 2014 International Conference on Mechanical Design, Manufacture

and Automation Engineering (MDMAE2014), Paper No. M062, Phuket, Thailand,

January 11-12, 2014. (NSC 101-2221-E-150-025 and NSC NSC 102-2221-E-150 -047)

83. 黃運琳，許憲銘，賴冠霖，陳笛瑋，柯竑志，2014，”小型 CNC 工具機的電腦輔助

工程分析”，第二十二屆中華民國振動與噪音工程學術研討會論文集 (2014/6/7)，

Paper No. B1-6，國立彰化師範大學。(NSC 101-2622-E-150-019-CC3)

84. Yunn-Lin Hwang, Jung-Kuang Cheng, Van-Thuan Truong, 2014, “Computer-Aided

Dynamic Analysis and Simulation of Multibody Manufacturing Systems,” Proceedings

of 2014 International Conference on Engineering and Technology Innovation

(ICETI2014), Paper No. Y-1035, Kenting, Taiwan, R. O. C., November 1-3, 2014. (NSC

100-2221-E-150-006 & NSC 101-2622-E-150-019-CC3)

85. Yunn-Lin Hwang, Van-Thuan Truong, 2014, “A Synchronous Approach for Numerical

Simulation of Machine Tools,” Proceedings of International Conference on Engineering

Tribology Technology 2014 (ICETT2014), Paper No. CETT-006, Nantou, Taiwan, R. O.

C., November 21-23, 2014. (NSC 100-2221-E-150-006 & NSC 101-2622-E-150-019-CC3)

86. 劉宇軒、廖信豪、林柏銘、黃運琳，2014，”精密 CNC 鎢鋼帶鋸床之振動模態實驗

與分析”，中華民國力學學會第三十八屆全國力學會議論文集 (2014/11/21-

2014/11/22)，Paper No. Z-015，國立臺灣海洋大學。( NSC 103-2622-E-150-006-CC3)

87. 黃運琳，謝氏娜，2014，" Kinematic Analysis and Control of a Humanoid Robot "，

20

中國機械工程學會第三十一屆全國學術研討會論文集(2014/12/6-2014/12/7)，Paper No.

02876，逢甲大學。 (NSC 99-2221-E-150-003 & MOST 103-2622-E-150-006-CC3)

88. 林柏銘、廖信豪、劉宇軒、黃運琳，2015，”高效 CNC 型鋼製程帶鋸床之電腦輔

助工程與結構振動分析”，第二十三屆中華民國振動與噪音工程學術研討會論文集

(2015/6/27)，Paper No. A-4，明志科技大學。(MOST 103-2622-E-150-006-CC3, MOST

104-2622-E-150-003)

89. Yunn-Lin Hwang, Cao-Sang Tran, Jeng-Haur Horng，2015，”Using CAE Techniques

on The Hydraulic Control System of CNC Machine Tools”，第二十三屆中華民國振動

與噪音工程學術研討會論文集(2015/6/27)，Paper No. J-9，明志科技大學。(MOST

103-2622-E-150-006-CC3, MOST 104-2622-E-150-003)

90. Yunn-Lin Hwang, Chien-Hsin Chen, Thi-Na Ta, Kun-Nan Chen, 2015, “Using Zero

Moment Point Preview Control Formulation to Generate Nonlinear Trajectories of

Walking Patterns on Humanoid Robots,” Proceedings of 12th International Conference

on Fuzzy Systems and Knowledge Discovery (FSKD 2015), Paper No. P1467,

Zhangjiajie, China, August 15-17 2015. (MOST 103-2622-E-150-006-CC3, MOST 104-

2622-E-150-003)

91. 黃運琳，林柏銘、賴湘焄、賴建甫、鄧文明、陳高創，2015，”高效 CNC 型鋼製程

帶鋸床之電腦輔助工程分析”， 2015 第二屆臺灣磨潤科技研討會暨海峽兩岸學術研

討會論文集(2015/10/31-2015/11/1)，Paper No. CTTT069，雲林縣斗六市劍湖山世界

(國立虎尾科技大學主辦)。(MOST 104-2221-E-150-062)

92. Yunn-Lin Hwang, Thi-Na Ta, Siang-Syun Lai，2015，”Numerical and Experimental

Dynamic Analysis of Machine Tool Spindle Systems”， 2015 1st Spintech Technology

Thesis Award (2015/11/27)，高速主軸創新應用實作類別優等獎，屏東縣墾丁福華渡假

飯店。(MOST 104-2221-E-150-062)

93. 黃運琳、賴建甫、鄭敬駱、劉羿伶、彭介慈，2015，"多體機械系統動力學分析以工

具機為例"，中國機械工程學會第三十二屆全國學術研討會論文集 (2015/12/11-

2015/12/12)，國立高雄應用科技大學，高雄市蓮潭會館。 (MOST 103-2622-E-150-

006-CC3)

94. Yunn-Lin Hwang, Thi-Na Ta, Siang-Syun Lai, Wei-Sin Lin，2016，”Numerical and

Experimental Modal Analysis of Machine Tool Spindle System”，第二十四屆中華民

國振動與噪音工程學術研討會論文集(2016/6/25)，正修科技大學。(MOST 104-2622-E-

150-009-CC3, MOST 105-2622-8-150-001-TE3)

95. 黃運琳、謝氏娜、賴湘焄、林韋昕，2016，”高速主軸之動態特性分析與實驗”，

2016 2nd Spintech Technology Thesis Award (2016/10/1)，高速主軸創新應用實作類別

優等獎，屏東縣墾丁福華渡假飯店。(MOST 104-2622-E-150-009-CC3)

96. Yunn-Lin Hwang, Thi-Na Ta, Jung-Kuang Cheng, 2016, “The Friction Effects for

Contact Force Analysis of Three Axes CNC Machine Tool,” Proceedings of

21

International Conference on Engineering Tribology and Applied Technology 2016

(ICETAT2016), Paper No. CETATS 086, Taipei, Taiwan, R. O. C., November 4-6, 2016.

(MOST 104-2622-E-150-009-CC3)

97. Thi-Na Ta, Yunn-Lin Hwang，2016，”Gait Analysis and Simulation of Biomimetic

Humanoid Robot”，中華民國力學學會第四十屆全國力學會議論文集(2016/11/25-

2016/11/26)，Paper No. Z-1028，國立交通大學。( MOST 104-2221-E-150-062)

98. 黃運琳、林韋昕、謝氏娜、賴湘焄，2016，" CNC工具機高速主軸之動態特性分析與

實驗"，中國機械工程學會第三十三屆全國學術研討會論文集(2016/12/3-2016/12/4)，

工業技術研究院，新竹市。 (MOST 105-2622-8-150-001-TE3, MOST 104-2622-E-150-

009-CC3)

99. 黃運琳、林韋昕、賴湘焄、鍾宇翔、莊凱翔，2017，”自動倉儲架的電腦輔助工程分

析與模態測試”，第二十五屆中華民國振動與噪音工程學術研討會論文集(2017/6/3)，

長庚大學。(MOST 104-2622-E-150-062, MOST 105-2622-8-150-001-TE3)

100. 黃運琳、彭介慈、劉羿伶、鍾宇翔、莊凱翔、林家弘，2017，”CNC 工具機的電腦

輔助設計與動態模擬分析”，第二十五屆中華民國振動與噪音工程學術研討會論文集

(2017/6/3)，長庚大學。(MOST 104-2622-E-150-009-CC3, MOST 105-2622-8-150-001-

TE3)

101. Yunn-Lin Hwang, Thi-Na Ta, Van-Thuan Truong，2017，”Numerical Control of

Multi-Body Dynamic Systems Based on Recursive Method”， 2017第三屆臺灣磨潤

科技研討會論文集(2017/10/6-2017/10/7)，Paper No. CTTT001，崑山科技大學，台南

市。(MOST-105-2622-E-150-007-CC3)

102. Yunn-Lin Hwang, Thi-Na Ta, 2017, “The Stick-Slip Friction Effect on Motion Accuracy

of Multibody Systems - CNC Machine Tools,” Proceedings of The 1st Japan-Taiwan

International Tribology Symposium 2017 (JTTS2017), Kagoshima, Japan, from

October 13-16, 2017. (MOST 106-2622-E-150-007-CC3 and MOST 106-2622-8-150-001-

TE3)

103. 黃運琳、林家弘、鍾宇翔、莊凱翔、吳昱緯，2017，”人體多體系統的動態分析與模

擬”，中華民國第二十屆全國機構與機器設計學術研討會論文集 (2017/11/17-

2017/11/18)，Paper No. 62，國立彰化師範大學。(MOST 106-2622-E-150-007-CC3,

MOST 106-2622-8-150-001-TE3)

104. 黃運琳、莊凱翔、吳昱緯、林家弘、鍾宇翔，2017，”應用多體動力學軟體於倒單擺

機械系統的控制與分析”，中華民國力學學會第四十一屆全國力學會議論文集

(2017/11/24-2017/11/25)，Paper No. 1145，國立成功大學。(MOST 106-2622-E-150-

007-CC3, MOST 106-2622-8-150-001-TE3)

105. 黃運琳、鍾宇翔、莊凱翔、吳昱緯、林家弘，2017，”汽車懸吊系統的耐久度分析與

研究”，中華民國第二十二屆車輛工程學術研討會會議論文集(2017/11/24)，Paper No.

F102，國立台北科技大學，台北市。(MOST 106-2622-E-150-007-CC3, MOST 106-

22

2622-8-150-001-TE3)

106. 黃運琳、吳昱緯、林家弘、鍾宇翔、莊凱翔，2017，" 多功能氣動砂磨機之電腦輔助

工程分析"，中國機械工程學會第三十四屆全國學術研討會論文集 (2017/12/1-

2017/12/2)，國立勤益科技大學，台中市。 (MOST 106-2622-E-150-007-CC3, MOST

106-2622-8-150-001-TE3)

107. 黃運琳、吳昱緯、鍾宇翔、林家弘，2018，”多功能氣動砂磨機之轉子平衡塊設計與

振動分析研究”，第二十六屆中華民國振動與噪音工程學術研討會論文集

(2018/6/30)，國立清華大學，新竹市。 (MOST 106-2622-E-150-007-CC3, CTSP-

105AG04, MOST 106-2622-8-150-001-TE3)

108. Yunn-Lin Hwang, Thi-Na Ta, 2018, “The influence of the friction force on the sliding

stability of controlled multibody systems - CNC machine tool,” Proceedings of The 6th

Asia International Conference on Tribology (ASIATRIB2018), Paper No. 316, Kuching,

Sarawak Malaysia, from September 17-20, 2018. (MOST 106-2622-E-150-007-CC3 and

MOST 106-2622-8-150-001-TE3)

109. Yunn-Lin Hwang, 2018, “The Dynamic Analysis and Control of Hydraulic Machine

System and Industrial Robotic Manipulators,” Proceedings of International Conference

of Fluid Machinery and Automation Systems (ICFMAS2018), Paper No. 1, Hanoi, Viet

Nam, October 27-28, 2018. (MOST 104-2622-E-150-062 and MOST 105-2622-E-150-

007-CC3)

110. Yunn-Lin Hwang, Thi-Na Ta, Jung-Kuang Cheng, 2018, “Uncertainty Analysis of CNC

Machine Tools Based on Monte Carlo Method,” Proceedings of International

Conference on Engineering Tribology and Applied Technology 2018 (ICETAT2018),

Paper No. CETAT-A027, Taipei, Taiwan, R. O. C., November 16-18, 2018. (MOST 107-

2221-E-150-011, MOST 107-2622-8-150-001-TE3)

111. Van-Thuan Truong, Yunn-Lin Hwang, Jung-Kuang Cheng, 2018, “Dynamics Analysis

and Numerical Simulation of Large-scale Hydraulic Cylinder Actuator,” Proceedings of

International Conference on Engineering Tribology and Applied Technology 2018

(ICETAT2018), Paper No. CETAT-A108, Taipei, Taiwan, R. O. C., November 16-18,

2018. (MOST 107-2221-E-150-011, MOST 107-2622-8-150-001-TE3)

112. 黃運琳、陳靖廷、鍾宇翔、劉素莉，2019，”立式加工中心機的電腦輔助模態分析與

實驗模態分析”，台灣機電工程國際學會第四屆全國學術研討會論文集(2019/2/15-

2019/2/16)，國立高科技大學，高雄市。(MOST 107-2622-E-150-006-CC3， CTSP-

105AG04，MOST 107-2622-8-150-001-TE3)

113. Sook-ruadee Lawaroon, Yunn-Lin Hwang, 2019， ”Dynamic analysis of vibration

and durability on multibody landing gear systems” , The 10th Asian-Pacific

Conference on Aerospace Technology and Science & The 4th Asian Joint Symposium on

Aerospace Engineering Venue:第十屆亞洲航太工程研討會論文集 (2019/8/28-

23

2019/8/31)，Paper No. 2019-19-001，國立交通大學，新竹市。

114. Yunn-Lin Hwang, Thi-Na Ta, Jeng-Haur Horng，2019，”Experimental Investigation

of Friction-Vibration Correlation”， 2019 第四屆臺灣磨潤科技研討會論文集

(2019/10/25-2019/10/26)，Paper No. CTTT044，國立成功大學，台南市。(MOST-107-

2622-E-150-011)

115. 陳靖廷、黃運琳，2019，”運用 RecurDyn 軟體進行鋼纜動力學分析”，中華民國第

二十二屆全國機構與機器設計學術研討會論文集(2019/11/22-2019/11/23)，Paper No.

12，國立中正大學。(MOST 107-2622-E-150-006-CC3)

116. Sook-ruadee Lawaroon, Yunn-Lin Hwang, Kuo-Chiang Shang，2019，” The virtual

model analysis of multibody systems”，中華民國力學學會第四十三屆全國力學會議

論文集(2019/11/29-2019/11/30)，Paper No. 10001，逢甲大學。( MOST 107-2622-E-

150-006-CC3)

Curriculum Vitae YUNN-LIN HWANG, Ph.D.hwang.nfu.edu.tw/English/cv-hwang.pdf · Curriculum Vitae...

Documents

Transcript of Curriculum Vitae YUNN-LIN HWANG, Ph.D.hwang.nfu.edu.tw/English/cv-hwang.pdf · Curriculum Vitae...