CURRICULUM VITAE PROFESSIONAL INTERESTS · CURRICULUM VITAE _____ PROFESSIONAL INTERESTS Nano and...

Mustafa Yavuz, University of Waterloo, Ontario, Canada, 2015

of 18

CURRICULUM VITAE

___________________________________________________________________________________

PROFESSIONAL INTERESTS

Nano and Micro-fabrication (N/MEMS)

Micro- and nano-joining, packaging and reliability

Quantum Electronic Solids: Superconductors, Metamaterials and Graphene

___________________________________________________________________________________

EDUCATION

Ph.D. Materials Engineering, School of Mechanical, Materials & Mechatronic Engineering, University of

Wollongong, Wollongong, NSW, Australia, 1996

Ph.D. Applied Physics, Institute for Superconducting and Electronic Materials (ISEM), University of Wollongong,

Wollongong, NSW, Australia, 1995

M.Sc. Materials Engineering, Middle East Technical University (METU), Ankara, Turkey, 1991

B.Sc. Materials Engineering, Middle East Technical University, Ankara, Turkey, 1989

Ph.D. Supervisors:

Prof. S.X. Dou, University of Wollongong, NSW-Australia

Prof. H. Maeda, Tohoku University, Sendai-Japan (invented BSCCO superconductors, 1988), Professor Emeritus

Dr. Lou Vance, Australian Nuclear Science and Technology Organization (ANSTO), Lucas Heights, NSW-Australia

___________________________________________________________________________________

PROFESSIONAL EXPERIENCE

University of Waterloo, Waterloo, Ontario, Canada Professor, 2009-present

Associate Professor, 2004 -2009

Department of Mechanical & Mechatronics Engineering

Department of System Design Engineering (Cross Appointed) Department of Electrical & Computer Engineering (Cross Appointed)

Texas A&M University, College Station, Texas, USA Adjunct Professor, Department of Mechanical Engineering, 2004-present

TEES Associate Professor, Department of Mechanical Engineering, 2003 - 2004

TEES Assistant Professor, Department of Mechanical Engineering, 2000 - 2003

Assistant Professor, Department of Physics, 1999-2000 *TEES: Texas Engineering Experimentation Station

Yamagata University, Yonezawa, Yamagata-ken, Japan (山形大学工学部・大学院理工学研究科)

Adjunct Professor, 2006-present

Çankaya University, Ankara, Turkey Adjunct Professor, 2010-present

Accelerator Technology Corp, Bryan, Texas, USA Principal Engineer, 1998-1999

Tohoku University, Institute of Materials, Sendai, Japan (東北大学金材料研究所)

Assistant Professor, Institute for Materials Research (Kinken), 1997-1998


of 18

___________________________________________________________________________________

EDITORSHIP

Deputy Editor-in-Chief, Journal of Engineering Science and Technology (JESTECH), Elsevier, 2013-

Editor, Austin Journal of Nanomedicine & Nanotechnology, 2013-

Editor, Austin Journal of Robotics & Automation, 2014-

Editor, Scholarena Journal of Nanoscience and Nanotechnology (SAJNN), 2014-

Editor, Journal of Nanoscience & Technology (Symbiosis), 2013-

Editor, HSOA Journal of Nanotechnology: Nanomedicine & Nanobiotechnology, 2014-

Editor, OMMEGA Journal of Nanotechnology and Materials Science, 2014-

___________________________________________________________________________________

SCIENTIFIC BOARD MEMBERSHIP AND CONFERENCE CHAIR

Advisory Board Member, Conferences for Nanojoining and Microjoining, NMJ2014, 2014, Switzerland

Advisory Board Member, Journal of Nanoscience & Technology

Conference Chair, 3rd

Nanojoining and Microjoining, Waterloo, Canada, 2016

Member Inter. Advisory Comm., 14th

Inter Symp on Microelec and Packaging (ISMP), Seoul, Korea, 2015

Member, Inter. Advisory Board, 5th

International Conference on Supercond. and Magnetism-ICSM, 2015, Turkey

___________________________________________________________________________________

PROFESSIONAL REGISTRATION

Professional Engineer, PE, Texas, US, January 1998

Professional Engineer, PE, Sendai-Aoba, Japan, September 1997

Chartered Engineer, CEng, NSW, Australia, June 1992

Professional Engineer, PE, Turkey, September 1989

_____________________________________________________________________________________________

HONORS AND AWARDS

Japanese Society for the Promotion and Science (JSPS) Fellowship, 2007

US Pi-Tau-Sigma, National Mechanical Engineering Teaching Award, US, 2003

Honorary Fellow, ISEM, University of Wollongong, New South Wales-Australia, 1999

British Council Partnerships for Excellence Post-doc International Award, UK, 1997

Australian Postgraduate Award, Australian Institute of Nuclear Science & Engineering (AINSE), Australia, 1994-96

Wollongong University Postgraduate Award for Research, Australia, 1994-96

NATO Award, Italy, 1990

NATO Award, Hungary, 1989

RESEARCH CONTRIBUTIONS AND PRACTICAL APPLICATIONS

Dr. Yavuz is the editors for: Austin Journals of Nanomedicine & Nanotechnology and Robotics &

Automation, HSOA Journal of Nanotechnology: Nanomedicine & Nanobiotechnology”, Journal of

Nanoscience & Technology (Symbiosis), Scholarena Journal of Nanoscience and Nanotechnology

(SAJNN), OMMEGA Journal of Nanotechnology and Materials Science, and deputy editor-in-chief for Journal of Engineering Science and Technology (JESTECH), Elsevier since 2013.

Dr. Yavuz’s research area is micro and nanoscale materials design, fabrication and characterization, in 4

(four) key applications areas: a. Design, fabrication and characterization of high temperature (high-TC)

superconducting composite cables and wires used for superconducting magnets and MR tomography; b.

Design, fabrication and characterization of high-TC superconducting thin films for Superconducting

Quantum Interference Devices (SQUID) bio-sensors, and Qubits (Quantum Bits) for quantum information

storage; c. Design, fabrication and characterization of nano-building-blocks (thin films, nanowires,


of 18

nanochannels, nanotubes, nanoparticles) for nano- and micro-electro-mechanical systems (N/MEMS) for

photonic and electro-magnetic applications and ultrafast electronics (graphene-based NEMS), and d.

Packaging (nano- and micro-bonding), testing and reliability of MEMS and Graphene-based NEMS devices and interconnects.

Dr. Yavuz received the British Council Partnerships for Excellence Postdoctoral Bursary International

Award in 1997 for his work on high-TC superconductors. He received the Japanese Society for the

Promotion and Science (JSPS) Fellowship in 2006, 2007 and 2008; and was awarded US Pi-Tau-Sigma,

National Mechanical Engineering Honor Society Award in 2003. He was one of the founding members of

the Texas A&M University Interdisciplinary Graduate Materials Science and Engineering Program

established in 2003, and Nanotechnology Collaborative Graduate Program at the University of Waterloo.

He is currently the director of the Nano/Micro-Systems Research Lab supported by Canada Funding for

innovation (CFI) since 1995.

He is cited as one of the most prominent nano-researchers in Canada by the Ontario Provincial Government,

and was invited in 2007 and 2009 by the Canadian Ambassador for Japan as one of the Canadian Delegation to promote Canadian nanotechnology research in Tokyo, Japan.

Most Significant Contributions to Research and/or to Practical Applications

Developed a production tool that can be used to create templates for nano-electronics. This has been

enabling the fabrication of radically new devices and materials such as quantum computers. He has

developed the idea that vortices (nanoscale non-superconducting domains in a superconducting matrix) in

these templates can be engineered to make for self-assembly manufacture of magnetic particles into new

nano-structured materials and nano-scale electronic devices such as bio-SQUIDs and Qubits (US Patent, M.

Yavuz et al, “Method and System for Storing Information Using Nano-Pinned Dipole Magnetic Vortices in

Superconducting Materials, Jr., # 6,787,798, September 7, 2004).

Pioneered developing smart magnetic thin films for the levitation of N/MEMS (flying MEMS). His

contribution in this research is in developing design and fabrication of magnetic thin films and MEMS

gripper materials using ferromagnetic thin films for the magnetic levitation (US Patent Application, MEMS

Magnetic Levitation, Application No: 60/847934, Sept 29, 2006.

Developed graphene based NEMS devices interconnection packaging, metrology and integrating them

into MEMS and conventional CMOS systems (N. Udayakumar, A. Chakraborty, M. Irannejad, B. Cui, A.

Brzezinski, M. Yavuz “the Effects of Using Buffer Layers on Nanowire Bonding and Conductance

Properties of Graphene Based Electronic Devices”, 14th International Conference on Nanotechnology,

IEEE-Nano2014, 18-21 August, 2014, Toronto, Canada; and N. Udayakumar, A. Chakraborty, M.

Irannejad, B. Cui, A. Brzezinski, M. Yavuz “Effects of using 2D-materials buffer layer on the wirebonding

of grapheme based devices”, Graphene conference, 6-9 May, 2014, Toulouse, France)

1. Published/Accepted/Pending Journal Articles (among 92, 2015-2008 only)

(Yavuz’s students and postdocs in boldface)

1.1. Pending [J92] R. Alharbi, M. Irannejad, M. Yavuz, and E. Abdel-Rahman “The Effects of Surface Morphology on the

Optical Properties of Thin Aluminum Films”, Photonics Research, pending, 2015

[J91] J Zhang, M Irannejad, M Yavuz and B Cui “Enhanced Sensitivity of Smooth Gold Nanohole Array by

Thermal Annealing”, ACS Photonics, pending, 2015


of 18

[J90] J. Zhang, M. Irannejad, M. Yavuz, B. Cui “Bowtie Nano-Antenna with Single Digit Nanometer Gap for

Surface Enhanced Raman Scattering (SERS)”, Optics Express, pending, 2015

[J89] J. Zhang, M. Irannejad, M. Yavuz, B. Cui “Ultrasmooth Gold-Nanohole Array by Annealing for Sensitivity

Enhancement of Extraordinary Optical Transmission Biosensing”, Journal of Physical Chemistry C,

pending, 2015

[J88] M. Eltaher, M. Khater, S. Park, E. Abdel-Rahman, M. Yavuz “Higher-Order Analysis of Nano-beam Static

Stability”, Physica E: Low-dimensional Systems and Nanostructures (Elsevier), pending, 2015

1.2. Published/Accepted

2015-2014

[J87] M. Irannejad, B. Cui, and M. Yavuz “The Effects of Varying Dielectric Spacer Height in the Reflection

Resonance Spectrum of Gold Nanorod-on-Mirror Grating Structure”, DOI: 10.1007/s11468-015-9878-5,

2015

[J86] M. Khater, S. Akhtar, S. Park, S. Ozdemir, E. Abdel-Rahman, C. P. Vyasarayani and M. Yavuz, "Contact

damping in microelectromechanical actuators", Applied Physics Letter, 10.1063/1.4905057, vol. 105, no. 25,

2014

[J85] X. Bai X, D. Wen, C. Con, J. Zhang, M. Yavuz and B. Cui, “Research on Fabrication and Electronic

Characteristics of Dual-Extended Nano Structure Memristor”, Key Engineering Materials, vol. 609-610, pp.

728-733, 2014

[J84] F. Saffih, C. Con, A. Alshammari, M. Yavuz, and B. Cui, “Fabrication of silicon nanostructures with large

taper angle by reactive ion etching”, J. Vac. Sci. Technol. B, vol. 32, 06FI04, 2014

[J83] M. Yavuz, M. Irannejad, K. Alici, E. Abdel-Rahman, A. Brzezinski and B. Cui, “Editorial: Graphene Based

Nano Electromechanical Interconnects”, Austin Journal of Nanomedicine & Nanotechnology, vol.2, issue 6,

pp.1-2, 2014

[J82] R. Alharbi, E. Abdul-Rahman, M. Irannejad, and M. Yavuz, “Optical Properties of Thin Aluminum Films”,

Special Issue on Packing and Reliability of Nano and Micro-electro-mechanical-system (N/MEMS) Devices:

Austin Journal of Nanomedicine & Nanotechnology, Accepted, 2014 [J80] M. Khater, M. Eltaher, E. Abdel-Rahman, and M. Yavuz, “Surface and Thermal Load Effects on the

Buckling of Curved Nanowires”, Engineering Science and Technology (JESTECH, Elsevier), in press, 2014

[J79] S. Ozdemir, O.E. Gunal, M.E. Khater, R. Saritas, H. Nafissi, S. Park, E. Abdel-Rahman and M. Yavuz,

“Measuring Quality Factor for MEMS devices”, Special Issue on Packing and Reliability of Nano and Micro-electro-mechanical-system (N/MEMS) Devices: Austin Journal of Nanomedicine & Nanotechnology,

Accepted, 2014

[J78] M. Yilmaz, B. A. Tunkar, S. Park, K. Elrayes, M. A.E. Mahmoud, E. Abdel-Rahman, M. Yavuz "Passive

Full-Wave MOSFET Rectifiers for Electromagnetic Energy Harvesting", Journal of Applied Physics,

10.1063/1.4896668, vol. 16, Sep 30, 2014

[J77] B. Xiaohui, W. Dianzhong, C. Con, J. Zhang, M. Yavuz, B. Cui “Research on Fabrication and Electronic

Characteristics of Dual-extended Nano Structure Memristor”, Key Engineering Materials, vols. 609-610, pp

728-733, 2014

[J76] F. Aydinoglu, M. Alhazmi, B. Cui, O. M. Ramahi, M. Irannejad, A. Brzezinski, and M. Yavuz, “Higher

Performance Metal-Insulator-Metal Diodes using Multiple Insulator Layers, Austin Journal of Nanomedicine & Nanotechnology, vol. 1, Issue 1, Accepted in 2013, 2014

[J75] M. Yavuz, A. Brzezinski, B. Cui and E. Abdel-Rahman, “Editorial: Trends in Nano and Micro-Electro-

Mechanical Systems and Training Recommendations for Highly Qualified Personnel (HQP) in This Field”,

Austin Journal of Nanomedicine & Nanotechnology, vol.2, issue 1, 2014, 2 pages, 2014

[J74] M. Yavuz, M. Irannejad, A. Brzezinski, B. Cui, and E. Abdel-Rahman, “Editorial: An Outlook to

Nanotechnology”, Nanoscience & Technology (Symbiosis), 2013, vol. 1, Issue 1, 2 pages, 2014

[J73] M. Alhazmi, F. Aydinoglu, B. Cui, O. M. Ramahi, M. Irannejad, A. Brzezinski, and M. Yavuz,

“Comparison of the Effects of Varying of Metal Electrode in Metal-insulator-metal Diodes with Multi-

Dielectric Layers”, Austin Journal of Nanomedicine & Nanotechnology, vol. 2, Issue 2, Accepted in 2013,

2014

[J72] A.S. Abbas, M. Yavuz and B. Cui, “Polycarbonate Electron Beam Resist Using Solvent Developer”,

Microelectronic Eng, vol. 113, pp. 140–142, 2014 [J71] A.S. Abbas, S. Alqarni, B.B. Shokouhi, M. Yavuz, and B. Cui “Water soluble and metal-containing electron

beam resist poly (sodium 4-styrenesulfonate)”, Mater. Res. Express, vol. 1, 045102, 2014


of 18

[J70] M. Irannejad, J. Zhang, M. Yavuz and B. Cui, “Numerical Study of Optical Behavior of Nano-Hole Array

With Non-Vertical Sidewall Profile”, Plasmonics (Springer), vol.9, pp. 537–544, 2014

2013

[J69] C. Con, A. S Abbas, M. Yavuz and B. Cui, “Dry Thermal Development of Negative Electron Beam Resist

Polystyrene”, Advances in Nano Research, vol. 1, pp. 105-109, 2013

[J68] M. Irannejad, M. Yavuz and B. Cui, “Finite Difference Time Domain (FDTD) Study of Light Transmission

through Multi-Hole Nanostructure in Metallic Film”, Photonics Research, vol. 1, no.4, pp. 154-157, 2013

[J67] T. Degirmenci, M.F. Yegul, S.F. Erenay, S. Striepe, M. Yavuz “Standardization and Certification in Lean

Manufacturing”, Journal of Enterprise Transformation, vol. 3, pp. 211–232, 2013

[J66] H. A. Alarifi, M. Atiş, C. Özdoğan, A. Hu, M. Yavuz, Y. Zhou, “Determination of Complete Melting and

Surface Premelting Points of Silver Nanoparticles by Molecular Dynamics Simulation”, Journal of Physical Chemistry Part C: Physical Processes in Nanomaterials and Nanostructures, 117 (23), pp. 12289-12298,

2013

[J65] H. A. Alarifi, M. Atiş, C. Özdoğan, A. Hu, M. Yavuz, Y. Zhou, “Molecular Dynamics Simulation of

Sintering and Surface Premelting of Silver Nanoparticles”, Materials Transaction, The Japan Institute of

Metals and Materials, vol. 54, no. 6, pp. 884-89, 2013

[J64] N. Topaloglu, P.M. Nieva, M. Yavuz, J.P. Huissoon “An Effective Thermal Conductance Tuning Mechanism

for Uncooled Microbolometers”, Infrared Physics & Technology (Elsevier), Vol. 57, pp.81–88, 2013

[J63] O. Alshehri, M. Yavuz, T. Tsui “Manifestation of External Size Reduction Effects on the Yield Point of

Nanocrystalline Rhodium Using Nanopillars Approach”, Acta Materialia (Elsevier), vol. 61, issue 1, pp. 40-

50, 2013

2012 [J62] W. Liu, M. Ferguson, M. Yavuz, B. Cui “Porous TEM Windows Fabrication using CsCl Self-assembly”, J.

Vac. Sci. Technol. B, vol. 30, pp. 06F201, 2012

[J61] W.M. Chen, J. Xuchuan, S. Kambe, M. Yavuz “Abnormal Activation Energy of Bi-2223 Crystal Growth and

Challenges of Crystal Growth Kinetics Suffered”, Journal of Applied Superconductivity and Electromagnetics, vol. 3, no.1, pp.29-34, 2012

[J60] C. Con, R. Dey, M. Ferguson, J. Zhang, R. Mansour, M. Yavuz, B. Cui “High Molecular Weight Polystyrene

as Very Sensitive Electron Beam Resist”, Microelectronic Engineering (Elsevier), vol. 98, pp.254-257, 2012

[J59] C. Con, J. Zhang, Z. Jahed, TY Tsui, M. Yavuz, B. Cui “Thermal Nano-Imprint Lithography Using

Fluoropolymer Mold”, Microelectronic Engineering(Elsevier), vol. 98, pp.246-249, 2012

2011 [J58] S. Ma, C. Con, M. Yavuz, B. Cui “Polystyrene Negative Resist for High Resolution Electron Beam

Lithography”, Nanoscale Research Letters (Springer), vol.6, pp.446 (6 pages), 2011

[J57] J. Zhang, M. Fouad, M. Yavuz, B. Cui “Charging Effect Reduction In Electron Beam Lithography with nA

Beam Current”, Microelectronic Engineering (Elsevier), vol. 88, Issue 8, pp.2196-2199, 2011

[J56] H. Alarifi, A. Hu, M. Yavuz, Y. N. Zhou “Silver Nanoparticle Paste for Low-Temperature Bonding of

Copper”, J. Elec. Mater. (Springer), vol. 40, No.6, pp.1394-1402, 2011

[J55] W.M. Chen, M. Yavuz, S. Kambe “Growth Kinetics and Morphological Transformation of Bi-2223

Crystals”, Solid State Communications (Elsevier), vol. 151, Issue 6, pp.495–498, 2011

2010 [J54] M. Fouad, M. Yavuz, B. Cui “Nanofluidic Channels Fabricated by E-beam Lithography and Polymer Reflow

Sealing”, J. Vac. Sci. Technol. B, vol. 28, no. 6, pp. C6/11-C6/13, 2010

[J53] N. Topaloglu, P. M. Neiva, M. Yavuz, J. P. Huissoon “Thermal Conductance Modeling of an Uncooled

Microbolometer Pixel”, Sensors and Actuators A (Elsevier), vol. 157, Issue 2, pp.235-245, 2010

[J52] M. F. Yegul, M. Yavuz, K. Agpak "Two-Sided Assembly Line Balancing with Cross-Over", CSME Transactions, vol.34, no.1, 12-pages, 2010


of 18

2009 [J51] C. Elbuken, M. B. Khamesee, M. Yavuz “MechMN: Design and Implementation of a Micromanipulation

System using a Magnetically Levitated MEMS Robot”, IEEE/ASME Transaction on Mechatronics: Focused

section on for Mechatronics for MEMS and NEMS, TMECH, vol. 14, no. 4, pp.434-445, 2009

[J50] C. Elbuken, N. Topaloglu, P. M. Nieva, M. Yavuz, J. P. Huissoon “Modeling and Analysis of a 2-DOF

Bidirectional Electro-thermal Actuator”, Journal of Microsystems Technologies (Springer), vol. 15, no.5, pp.

713-722, May 2009

[J49] W. M. Chen, M. Yavuz and S. Kambe and J.X. Jing, “Precursor Size Effects on Kinetics Parameters of Bi-

2223 Growth”, The Open Superconductors Journal, vol. 1, no.8, pp. 8-14, 2009

2008 [J48] W. M. Chen, S. S. Bao, M. Yavuz, S. Kambe and J. X. Jin, “Bi-2223 Crystal Growth Kinetics and Phase

Mean Lifetimes”, Nature Sciences, vol. 3, no. 1, pp. 7-11, 2008

[J47] W. M. Chen, J.X. Jing and M. Yavuz, “Physical Effects of Mechanical Processes on Bi-2223 Tapes”,

Journal of Electronic Science and Technology (China), vol.6, no.2, pp. 185-190, June 2008

[J46] W. M. Chen, J.X. Jing and M. Yavuz, “Temperature Dependence of Growth Mechanism for Nanoscale High

TC Superconductors”, Journal of Electronic Science and Technology (China), vol.6., no.2, pp. 175-180, June

2008

[J45] W. Wu, A. Hu, X. Li, J.Q. Wei, K.L. Wang, M. Yavuz, N. Zhou “Vacuum Brazing of Carbon Nano Tube

Bundles”, Materials Letter (Elsevier), vol. 62, pp.4486-4488, August 2008 (NSREC-ENGAGE)

[J44] C. Elbuken, L. Gui, C.L. Ren, M. Yavuz, M.B. Khamesee “Design and Analysis of a Polymeric Photo-

thermal Micro-actuator”, Sensors & Actuators A (Elsevier), vol. 147, pp.292-299, May 2008 (UWaterloo)

[J43] C. Elbuken, M. Yavuz, M.B. Khamesee “Development of Crystalline Magnetic Thin Films for Micro-

levitation”, Journal of Applied Physics (American Institute of Physics-AIP), vol.104, Issue 4, pp. 044905 -

044905-7, August 2008; selected for Sept 8, 2008 issue of Virtual Journal of Nanoscale Science &

Technology (UWaterloo)

[J42] S. Abe, S. Kambe, T.V. Chong, H. Kawaji, T. Atake, S. Ishii, M. Yavuz “Strong Correlation Between y’/x

and superconductivity of Nax(H3O)zCoO2.y’H2O”, Journal of the Ceramic Society of Japan, vol.116, no.5,

pp.641-644, February 2008 (UWaterloo and Japanese Ministry of Education)

2. Refereed Conference Articles: (among 107; full review of full paper; 2014 only)

2014

[C107] M. Yavuz, M. Irannejad, A. Brzezinski, B. Cui and E. Abdel-Rahman “Nano-bonding and Packaging

Graphene-based NEMS Devices”, SINC 2014, Riyadh, Dec 1-3, 2014

[C106] W. Alyalak, M. Yavuz, and B. Cui “Neutral surface prepared by vapor phase coating for polystyrene-b-

PMMA self-assembly”, 40th

International Conference on Micro- and Nano-Engineering (MNE), Lausanne,

Switzerland, 2014

[C106] T. Dagdelen, M. Khater, S. Park, R. Saritas, E. Abdel-Rahman, and M. Yavuz “Displacement Analysis of

Bonding Wires under DC Current”, 2nd

International Conference on Nanojoining and Microjoining (NMJ 2014), Emmetten, Switzerland, December 7-10, 2014

[C105] S. Park, M. Khater, B. Li, M. Al-Ghamdi, A. A. Aziz, E. M. Abdel-Rahman, and M. Yavuz “Experimental

Evidence of Intermittency Route to Chaos in Electrostatic MEMS”, IEEE MEMS, Avenida Amaral, Estoril,

Portugal, Jan 18-22, Accepted, 2015

[C104] H. A. Alarifi, M. Ati, C. Özdogan, A. Hu, M. Yavuz, Y. Zhou “Stability and Melting of FCC Truncated

Octahedral Ag Nanoparticles by Molecular Dynamics Simulation”, 2nd

International Conference on

Nanojoining and Microjoining (NMJ 2014), Emmetten, Switzerland, December 7-10, 2014

[C103] A. S. Abbas, M. Yavuz and B. Cui “Metal and Organic Nanostructure Fabrication by Electron Beam

Lithography and Dry Liftoff”, 14th

International Conference on Nanotechnology (IEEE-Nano), Aug. 18-21,

Toronto, Canada, 2014

[C102] S. Alqarni, A. S. Abbas, M. Yavuz, B. Cui “Water Soluble and Developable E-Beam Resist Sodium PSS”,

58th

International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN

2014), May 27-30, Washington, DC, USA, 2014


of 18

[C101] J. Zhang, M. Irannejad, M. Yavuz, B. Cui “Smooth Au Film by Annealing for Enhanced Extraordinary

Optical Transmission”, 58th

International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2014), May 27-30, Washington, DC, USA, 2014

[C100] A. Alshammari, C. Con, M. Yavuz, B. Cui “Benchtop Fabrication Method on Non-Planar Surface Using

SAM as E-Beam Resist”, 58th


[C99] F. Saffih, A. Alshammari, M. Yavuz, B. Cui “Fabrication of Silicon Nanostructures with Large Taper Angle

by Reactive Ion Etching”, 58th


[C98] A. Alshammari, M. Yavuz, B. Cui “Improved Anti-Adhesion FOTS Coating for Imprint Mold”, 58th

International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN

2014), May 27-30, Washington, DC, USA, 2014

[C97] S. Alqarni, A. S. Abbas, M. Yavuz, B. Cui “Dry Liftoff of Metal and Organic Materials”, 58th

International

Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2014), May 27-30,

Washington, DC, USA, 2014

[C96] M. Eltaher, M. Khater, E. Abdel-Rahman, and M. Yavuz “A Model for Nano Bonding Wires under

Thermal Loading”, 14th

International Conference on Nanotechnology (IEEE-Nano), August 18-21, Toronto,

Canada, 2014

[C95] D. Effa, E. Abdel-Rahman, and M. Yavuz “Cantilever Beam Microgyroscope Based on Frequency

Modulation”, ASME 2014 International Design & Engineering Technical Conferences and Computers &

Information in Engineering Conference (IDETC/ CIE 2014), Buffalo, NY, August 17-20 , Accepted, 2014

[C94] B. Tunkar, M. Bendame, E. Abdel-Rahman, and M. Yavuz “Wave Rectification in Electromagnetic Energy

Harvesters”, ASME 2014 Conference on Smart Materials, Adaptive Structures, and Intelligent Systems,

September 8-10, Newport-Rhode Island, Accepted, 2014

[C93] S. Park, M. Al-Ghamdi, M. Khater, E. Abdel-Rahman, and M. Yavuz “Adjustable Sensitivity MEMS

Magnetic Sensor”, ASME 2014 International Design & Engineering Technical Conferences and Computers

& Information in Engineering Conference (IDETC/ CIE 1014), Buffalo, NY, August 17-20 , 2014

[C92] M. Xie, S. Park, E. Abdel-Rahman, M. Yavuz “Actuation of a Frequency Modulated MEMS Gyroscope”,

ASME 2014 International Design & Engineering Technical Conferences and Computers & Information in

Engineering Conference (IDETC/ CIE 1014), Buffalo, NY, August 17-20 , 2014

[C91] S. Park, H. Nafissi, M. Khater, M. Korkmaz, E. Abdel-Rahman, and M. Yavuz “Micromirror Coupled with

Resonant Drive Circuit Excited by Amplitude Modulated Signal”, ASME 2014 International Design & Engineering Technical Conferences and Computers & Information in Engineering Conference (IDETC/ CIE

1014), Buffalo, NY, August 17-20 , 2014

[C90] T. Dagdelen, K. Elrayes, S. Park, M. Khater, R. Saritas, E. M. Abdel-Rahman and M. Yavuz “Fatigue Test

for Thick Wire Bonds”, ASME 2014 International Design & Engineering Technical Conferences and

Computers & Information in Engineering Conference (IDETC/ CIE 1014), Buffalo, NY, August 17-20 , 2014

[C89] D. Effa, E. Abdel-Rahman and M. Yavuz “Analysis of Thermal Noise in Frequency Modulated Gyroscopes”,

ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Nov 14-20, Montreal,

Canada, 2014

[C88] R. Saritas, M. Khater, H. Nafissi, S. Park, T. Dagdelen, E. Abdel-Rahman and M. Yavuz “Model

Response of Bonding Wires under Thermal Loading”, 14th

International Conference on Nanotechnology

(IEEE-Nano), August 18-21, Toronto, Canada, 2014

[C87] M. Irannejad, A. Chakraborty, N. Udayakumar, B. Cui, A. Brzezinski, E. Abdel-Rahman and M. Yavuz

“Numerical Study of Contact Resistance of Double Graphene/Graphene Like Materials”, ASME International Mechanical Engineering Congress and Exposition (IMECE 2014), Nov 14-20, Montreal, Canada, 2014

[C86] N. Udayakumar, A. Chakraborty, M. Irannejad, A. Brzezinski and M. Yavuz “Effect of Using Buffer

Layers on Nanowire Bonding and Conductance Properties of Graphene Based Electronic Devices”, 14th

International Conference on Nanotechnology (IEEE-Nano), August 18-21, Toronto, Canada, 2014

[C85] K. Ibrahim, M. Irannejad, A. Ramadhan, W. Alayak, J. Sanderson, B. Cui, A. Brzezinski, M. Yavuz

“Ultrafast Light Interaction with Graphene Oxide Aqueous Solution”, 14th

International Conference on Nanotechnology (IEEE-Nano), 18-21 August, Toronto, ON, Canada, 2014

[C84] N. Udayakumar, A. Chakraborty, M. Irannejad, B. Cui, A. Brzezinski, M. Yavuz “Effects of using 2D-

Materials Buffer Layer on the Wirebonding of Grapheme Based Devices, Graphene Conference, Toulouse,

France, May 6-9, 2014


of 18

[C83] M. Irannejad, J. Zhang, M. Yavuz, Bo Cui “Numerical Investigation of Optical Behavior of Nano-hole

Array with Non-vertical Sidewall Profile”, 58th

International Conference on Electron, Ion, and Photon Beam Technology and Nanofabrication (EIPBN 2014), May 27-30, Washington, DC, USA, 2014.

[C82] M. Irannejad, K. M. Ibrahim, F. Alussail, A. Ramadhan, W. Alyalak, J. Sanderson, G. Jose, A. Jha, B.

Cui, A. Brzezinski and M. Yavuz “Short Pulsed Laser Interaction with Graphene Oxide Solution”, 6th

International Conference on Optical, Optoelectronic and Photonic Materials and Applications (ICOOPMA), July 27- Aug 1, Leeds, UK, 2014

[C81] M. Irannejad, J. Zhang, M. Yavuz, A. Brzezinski and B. Cui “Sensitivity Enhancement of Gold Nano-hole

Array”, 6th

International Conference on Optical, Optoelectronic and Photonic Materials and Applications (ICOOPMA), July 27- Aug 1, Leeds, UK, 2014

3. Patents [P7] US Patent Application, Nano-joining for Dissimilar Nano-Building Blocks, Inventors: W. Wu, N. Zhou and

M. Yavuz, submitted on Jun 20, 2008

[P6] US Patent Application, MEMS Magnetic Levitation, Inventors: B. Khamesee, C. Elbuken, M. Yavuz,

Application No: 60/847934, Sept 29, 2006

[P5] US Patent: Method and System for Storing Information Using Nano-Pinned Dipole Magnetic Vortices in

Superconducting Materials, Inventors: M.J. Andrews, J.H. Ross, Jr., J.C. Slattery, M. Yavuz, A. Beskok, K.T.

Hartwig, Jr., No. 6,787,798, September 7, 2004

[P4] US Patent, Nano-Pinned Quantum Magnetic Flux for High Capacity Computer Memory,

Inventors: M. Andrews, A. Beskok, J. Chen, J. Ross, J. Slattery, M. Yavuz, No.1694TEES01, 2003

[P3] US Patent Application, Laminar Ceramic-Metal Composite and Method for Fabrication, Inventors: M.

Yavuz and P. McIntyre, December 2002

[P2] US Patent Disclosure, Hot processing of Bi-based Superconducting Metal-matrix Ceramic Composite Tapes,

Wires, Cables, and Coils, Inventors: M. Yavuz and P. McIntyre, Patent Application No: 50/231,400, Jan 1999

[P1] US Patent Disclosure, A Smart Skin: Micro-machined Un-cooled YBCO Bolometers on Flex Substrates,

Inventors: M. Yavuz, A. Yaradanakul and Y. Kuo, TAMUS 1922A, July 2002

4. Books and Chapters

[B3] S. Sahin, M. Yavuz, N. Zhou, Handbook of Microjoining and Nanojoining, “Chapter 18: Introduction to

Nanojoining”, 70 pages, editor: N. Zhou, Woodhead Publishing Ltd., 2007, also published in Chinese and

Indian

[B2] P. McIntyre and M. Yavuz, Physica C, Chapter edited on “Special Symposium on Cable Technology Focus”,

6th International Conference on Materials and Mechanisms of Superconductivity and High-Temperature

Superconductors, IEEE Transactions on Applied Superconductivity, Houston, Texas-USA, 2000

[B1] M. Yavuz, H. Kalebozan and E. Selcuk, “Materials Laboratory”, Middle East Technical University Press,

51-pages, Ankara-Turkey, 1991

_________________________________________________________________________________

INVITED SIGNIFICANT SEMINARS OR LECTURES (among 40; 2014-2008 only)

1. M. Yavuz, “Nano and Micro-Electro-Mechanical-Systems (N/MEMS) Packaging and Reliability”, Turkish M.

Yavuz “Nano-bonding and Packaging Graphene-based NEMS Devices”, SINC 2014, Riyadh, Dec 1-3, 2014

2. M. Yavuz “Displacement Analysis of Bonding Wires under DC Current”, 2nd

International Conference on

Nanojoining and Microjoining (NMJ 2014), Emmetten, Switzerland, December 7-10, 2014

3. M. Yavuz, “Nano and Micro-Electro-Mechanical Systems (N/MEMS)”, Gebze Yuksek Technology Institute,

Gebze, Turkey, July 15, 2014

4. M. Yavuz “Nano and Micro-Electro-Mechanical-Systems (N/MEMS) Packaging and Reliability”, Turkish

Scientific Organization (TUBITAK), Gebze, Turkey, July 10, 2014 (Seminar Series I)

5. M. Yavuz “Nanofabrication and Nano-Electro-Mechanical-Devices (NEMS)”, Turkish Scientific Organization (TUBITAK), Gebze, Turkey, July 16, 2014 (Seminar Series II)

6. M. Yavuz “Packaging and Reliability of Nano-Electro-Mechanical-Devices (NEMS)”, Turkish Scientific

Organization (TUBITAK), Gebze, Turkey, August 19, 2014 (Seminar Series III)


of 18

7. M. Yavuz “Training Highly Qualified Personnel (HQP) for Nano And Micro-Electro-Mechanical Systems”,

Turkish Scientific Organization (TUBITAK), Gebze, Turkey, August 22, 2014 (Seminar Series IV)

8. M. Yavuz, “Nano and Micro-Electro-Mechanical Systems (N/MEMS) and Their Packaging and Reliability”,

Alfred University, Alfred, NY, USA, Oct 22, 2013

9. M. Yavuz, “Materials for NMEMS”, ISEM, Wollongong University, Wollongong, Australia, July 12, 2013

10. M. Yavuz. “Materials for N/MEMS”, Scientific and Technological Research Council of Turkey, Ankara,

Turkey, Aug 1, 2013

11. M. Yavuz, “Joining of Carbon-Nano-Tubes by Vacuum Brazing and Their Structural Evaluation”, Tsinghua

University, Beijing, China, Dec 4, 2012

12. M. Yavuz, “Design, Fabrication and Packaging of N/MEMS Devices”, Multimedia Technologies Research

and Development Laboratory, Ankara, Turkey, July 12, 2012

13. M. Yavuz, “Novel Nano and Micro-Electro-Mechanical Systems (N/MEMS) and Their Packaging, Reliability

Tests and Applications”, Scientific and Technological Research Council of Turkey, Ankara, Turkey, Aug 8,

2012

14. M. Yavuz, “MEMS Packaging and Nano-joining”, ASELSAN, Turkey, Ankara, Aug 3, 2011

15. M. Yavuz, “MEMS Packaging and Nano-joining”, Bilkent, Turkey, Ankara, 2011

16. M. Yavuz, “Research Held at Waterloo Institute for Nanotechnology (WIN), Tokyo University of Science,

Feb15, 2010

17. M. Yavuz, “Nanojoining and Fabrication of Nanojunctions and Nano-Bio SQUIDs, Yamagata University,

Yonezawa, Japan, Feb16, 2010

18. M. Yavuz, “Joining of Nano-Building-Blocks and Fabrication of Nanojoints”, Cankaya University, Ankara-

Turkey, July 26 2010

19. M. Yavuz, “Nanojoining and Fabrication of Nanojunctions and Nano-Bio SQUIDs” North Dakota State

University, Fargo, USA, April 14, 2009

20. M. Yavuz, “Joining of Nano-Building-Blocks and Fabrication of Nanojoints”, Texas A&M University,

College Station, TX, March 10, 2009

21. M. Yavuz, “Nanojoining and Fabrication of Nanojunctions”, Canada-Japan Workshop on Nanomaterials, Tokyo-Japan, Feb13-21, 2009

22. M. Yavuz, “Nanojoining and Fabrication of Nanojunctions for Nanoelectronics”, 2nd

Tokyo University of

Science International Collaboration Workshop on Nanomaterials, Tokyo-Japan, December 10-12, 2008

23. M. Yavuz, “Developing Continuous Wrapping Tantalum Barriers for Internal-Nb3Sn Multi-Filamentary Wires

for ~20T Superconducting Magnets”, ICSM (International Conference on Superconductivity and Magnetism), Side-Antalya-Turkey, August 20-25, 2008

___________________________________________________________________________________

TECHNICAL CONSULTING

1. W.L. Gore and Associates-USA, 2011-present

2. Magna International, Ontario, Canada, 2007-present

3. Lumerics Solutions, Inc., British Columbia, Canada, 2013-present

4. Tornado Spectral Systems, Ontario, Canada, 2012-present

5. Christie Digitals, Ontario, Canada, 2012-present

6. Smarter Alloys Inc., Waterloo, Canada, 2014-present

7. Blackberry (RIM), Waterloo, Canada, 2006-present

8. ASELSAN (Turkish Military Industry Corp), Ankara, Turkey, 2009- present

9. Sumitomo Electric Ltd, Japan, 2007-present

10. Metal Manufacturers (MM), Sydney, NSW, Australia, 2000-2003

11. JM Clipper, Nacogdoches, Texas, 2003-2004

12. Accelerator Technology Corporation, Bryan, Texas, 2000-2004

13. IGC Advanced Superconductor, Waterbury, Connecticut, 1998-2004

14. IRDI and Weber, Midland, Ontario, Canada, 2004 – 2006


of 18

______________________________________________

RESEARCH AND VISTING FELLOWS SUPERVISED OR COSUPERVISED

1. Dr. Mehmet Canturk, Visiting Scholar, project title: “Nanomechanical Resonators”, IQC (Institute for

Quantum Computing), UW, Oct 2014-present

2. Dr. Mehrdad Irannejad, post-doctoral fellow (PDF), project title: “Finite difference time domain (FDTD)

study of light transmission through multi-hole nanostructure in gold film”, UW, 2012-present

3. Dr. Mohamed Eltaher (PDF), project title: “Effect of Area Contact on the Quality factor of MEMS

Actuators”, UW, 2013-2014

4. Dr. Mahmoud Khater (PDF), project title: “MEMS Packaging and Reliability”, UW, 2012-present

5. Dr. Sangtak Park (PDF), project title: “Low Voltage Actuation and Control of an Electrostatic Micromirror”,

UW, 2012-present

6. Dr. Yavuz Bayam, Visiting Scholar, project title: ”Nanofabrication”, University of Waterloo (UW), Jun-Sept

2014

7. Dr. Homeira Faramarzi (PDF), project title: “Laser Ablation of Graphite in Liquid”, UW, 2013-2014

8. Dr. W.M. Chen (Research Professor), project title: “Bi-based Superconducting Wires”, UW, 2005-present

9. Dr. A. Dahash Ali (Visiting Prof.), project title: “High-temperature superconductors”, UW, 2012

10. Dr. Benhür Satir, Post-Doctoral-Fellow (PDF), project title: “Logistic in Nanotechnology”, UW, 2011

11. Dr. Ahmet Kiliç (PDF), project title: “Nano-fabrication”, UW, 2010-2011

12. Mr. Mustafa Kiliç (Res. Assoc.): project title: "RF MEMS Filter Fabrication by E-Beam Lithography", 2011

13. Dr. Kürşad Alpaǧ (PDF), project title: “Logistic in Nanotechnology”, UW, 2009

14. Dr. Oleksa Hulko (Senior Research Engineer), project title: “Vacuum Fabrication, Microscopy and

Spectroscopy of Nanostructures for Superconducting SQUIDs and Qubits”, UW, July 2008-Dec 2008

15. Dr. Shiro Kambe (Visiting Prof and Professor of Human Sensing, University of Yamagata,

Japan), project title: “Nano-bio-sensors”, UW, Sept. 2007-2008

16. Dr. Nurten Ermis (Visiting Scholar and Asst. Professor of Electrical Engineering, University of Sakarya-

Turkey), project title: “Dynamic focusing Using PZT Materials for Bio-systems”, UW, 2006 - 2007

17. Dr. Kemal Ermis (Visiting Scholar & Asst. Professor of Mechanical Engineering, University of Sakarya-

Turkey), project title: “Hydrogen Storage through Carbon Nano Tubes”, UW, 2006 – 2007

18. Dr. Salim Sahin (Research Asst. Prof.), project title: “Nanojoining and junctions Using Carbon- Nano-

Tubes”, UW, 2006 – 2007.

19. Dr. Said Farahat (Visiting Professor and Professor of Mechanical Engineering, Baluchistan & Sistani

University-Iran), project title: “Dynamic focusing Using PZT Materials for Bio-systems”, UW, 2005 – 2006

20. Dr. Bob Fu (Postdoctoral Research Associate), project title: “Bi-Sr-Ca-Cu-O Superconductors”, Texas A&M

(TAMU) University and UW, 2002 – 2005

21. Dr. A. Yaradanakul (post-doctoral fellow), project title: “Uncooled Y-Ba-Cu-O IR Micro-bolometers”,

TAMU, 2001-2003

22. Dr. N. Tarim (Visiting Scholar and Professor of Mechanical Engineering, University of Sakarya-Turkey)

project title: “Radar Absorption Materials”, TAMU, 2002-2003

______________________________________________________________________________________________

SUPERVISION/CO-SUPERVISION OF GRADUATE STUDENTS

Doctoral

Current 1. Raed Alharbi, PhD thesis title: “Graphene-based Nano-Bio-Sensors ”, MME, UW, 2015

2. Amirool Abu Bakar, PhD thesis title: “Shape Memory Actuators ”, MME, UW, 2015

3. Andrew Michael, PhD thesis title: “Simulation of Mechanical Properties of MMM Shape Memory

Alloys”, MME, UW, 2014-present

4. Salamat Burzhuev, PhD thesis title: “Graphene-based Photo-detectors, MME, UW, 2014-present

5. David Effa, PhD thesis title: “Frequency-Modulated MEMS Gyroscopes”, MME, UW, 2011-present

6. Omar Alshehri, PhD thesis title: “Quantum Electronic Solids”, MME, UW, 2012-present

7. Turker Dagdelen, PhD thesis title: "Reliability of Wire Bonding ", MME, UW, 2013-present

8. Savas Ozdemir, PhD thesis title: “3D Printing, Packaging and Reliability”, UW, 2015


of 18

Completed 9. Dr. Fatih M. Yegul, PhD thesis title: “Logistics in Nanotechnology Industry”, MME, UW, completed, 2014

10. Mustafa Korkmaz, PhD thesis title: “N/MEMS and System Feedback”, Systems Design Engineering

Department (SDE), UW, 2013-2014, not completed

11. Dr. Hani Alarifi, PhD thesis title: “Ag Nanoparticles and Their Application in Low-Temperature Bonding

of Cu”, MME, UW, completed, 2013. Assistant Professor, KACST, Riyadh, Saudi Arabia

12. Dr. Nezih Topaloglu, Ph.D. thesis title: “Modelling & Optimization of Uncooled Micro-machined

Bolometers, MME, UW, completed May 6, 2009. Assist. Professor, Yeditepe University, Istanbul, Turkey

13. Dr. Caglar Elbuken, PhD thesis title “Magnetic Levitation of Polymeric Photo-Thermal Micro-grippers”,

Mechanical & Mechatronics Engineering Department, University of Waterloo, completed, 2008. Assistant

Professor, UNAM, Bilkent University, Ankara, Turkey

14. Dr. Said Boybay, thesis title: “Theory and Fabrication of Vortices in Diamagnetic Materials for Nano-scale

Manufacturing”, MME, UW, not-completed, 2004-2006. Assistant Prof, Antalya University, Turkey

Masters

Current

1. Abdullah Alshehri, Master thesis title: “N/MEMS Graphene Templates for Nanoelectronics”, MME, UW,

2015-present

2. Cemalettin Kaplan, Master thesis title: “Shape Memory Actuators”, MME, UW, 2015-present

3. M. Rasid Atelge, Master thesis title: “N/MEMS Packaging and Reliability”, MME, UW, 2014-present

4. Ridha Almikhlafi, Master thesis title: “MEMS Gyroscope Fabrication”, SDE, UW, 2014-present

5. Khaled Hussein, Master thesis title: “Ultrafast Light Interaction with Graphene Oxide Aqueous Solution”,

MME, UW, 2013-present

6. Apratim Chakraborty, Master thesis title: “Design and Fabrication of Graphene-based Transistors”, MME,

UW, 2014-present

7. Dawood Alsaedi, Master thesis title: “Packaging of Graphene-based Transistors”, Electrical & Computer

Engineering Department (ECE), UW, 2014-present

8. Bassam Tunkar, Master thesis title: “Wave Rectification in Electromagnetic Energy Harvesters”, MME,

UW, 2013-present

Completed

9. Michael Xie, Master thesis title: "Actuation of a Frequency Modulated MEMS Gyroscope ", MME, UW,

completed, 2015

10. Mervat Alamri, Master thesis title: “Graphene Film Fabrication”, SDE, UW, completed, 2015

11. Wadha Alyalak, Master thesis title: "Nano-fabrication using E-beam and Nano-imprinting ", MME, UW,

completed, 2015

12. Fatimah Alusail, Master thesis title: "Fabrication of Nano-Building Blocks via Nano-imprinting and E-

beam", MME, UW, completed, 2015

13. Savas Ozdemir, Master thesis title: “Quality Factor for MEMS devices”, MME, UW, completed, 2015

14. Resul Saritas, Master thesis title: "Packaging and Reliability of NMEMS”, MME, UW, completed, 2015

15. Raed A. Alharbi, Master thesis title: “Effect of Film Thickness on Reflection of Aluminum Nano-Films”,

MME, UW, completed, 2014

16. Alanoud Shammari, Master thesis title: " Improved Anti-adhesion FOTS Coating for Imprint Mold ",

MME, UW, not completed, 2012-2014

17. Manal Alhazmi, Master thesis title: "Fabrication and Characterization of Metal-Insulator-Metal Diode and

Gray Scale Lithography", MME, UW, completed, 2013

18. Ahmet Camlica, Master thesis title: “Least-Square Based Adaptive Source Localization Algorithm”, MME,

UW, completed, 2013

19. Mehmet Yilmaz, Master thesis title: "Passive Full-Wave MOSFET Rectifiers for Electromagnetic

Harvesting", ECE, UW, completed, 2013

20. Turker Dagdelen, Master thesis title: "Failure Analysis of Thick Wire Bonds", MME, UW, completed, 2013

21. Arwa Abbas, Master thesis title: "Nanofabrication Using Electron Beam Lithography: Novel Resist and

Applications", MME, UW, completed, 2013


of 18

22. Mohammad Alusail, Master thesis title: "Residual Stress Analysis by X-ray diffraction", MME, UW,

completed, 2013

23. Ferhat Aydinoglu, Master thesis title: "Metal-Insulator-Metal Diodes", MME, UW , completed, 2013

24. M. Ali Yurtalan, Master thesis title, “High Temperature DC SQUID Fabrication on Bicrystal YBCO Thin

Films”, MME, UW, completed, 2012

25. Omar D. Alshehri, Master thesis title: “Mechanical Behaviour of Nanocrystalline Rhodium Nanopillars

under Compression”, MME, UW, completed, 2012

26. Celal Con, Master thesis title, “Design and Characterization of Resist and Mold Materials for Electron-

Beam and Nanoimprint Lithography”, MME, UW, completed, 2011

27. Feyruz Kitapli, “Fabrication of Nanoscale Josephson Junctions and Superconducting Quantum Interference

Devices”, MME, UW, completed, 2011

28. Wei Wu, Master thesis title “Vacuum Brazing of Carbon Nanotube Strands”, MME, UW, completed, 2009

29. Qais Al-Rawi, Master thesis title: “Nanofabrication by PVD”, MME, UW, not completed, 2007-2009

30. Tamer Degirmenci, Master thesis title: “Standardization and Certification in Lean Manufacturing”, MME,

UW, completed, 2008, Chief Engineer, Turkey

31. Dr. O. Anderoglu, Master thesis title: “Residual Stress Measurement using X-Ray Diffraction”, Mechanical

Engineering Department (ME), Texas A&M University (TAMU), completed, 2004. Research Scientist, at

LANL, USA

32. Dr. G. Subramanian, Master thesis title: “Bi-Sr-Ca-Cu-O Thin Film Grown by Flash Evaporation and Pulse

Laser Ablation”, ME, TAMU, completed, August 2003, Post-doctoral Fellow at Florida University-USA

33. S. Kandahar, Master thesis title: “Surface Profiling & Vortex Engineering by Atomic Force Microscopy”,

ME, TAMU, completed, December 2003

34. Dr. B. Basaran, Master thesis title: “Optimization Studies on Thermal and Mechanical Manufacturing

Processes for Multifilament Superconducting Tape and Wire”, ME, TAMU, completed, 2003, Assistant at

Prof. at Türk Hava Kurumu Üniversitesi, Ankara, Turkey

35. K. M. Alam, Master thesis title: “Semiconductor Quantum Dots in Glasses”, ME, TAMU, completed,

August 2002

36. A. Ertekin, Master thesis title: “Effect of Doping in Bi-Sr-Ca-Cu-O Superconductor Composites”, ME,

TAMU, May 2001 (He is a project engineer in the Turkish Petroleum Corp.)

37. P. Paliwal, Master thesis title: “Bi-Sr-Ca-Cu-O Thin Films”, ME, TAMU, not completed, 2001-2002

___________________________________________________________________________________

TECHNICAL PERSON SUPERVISED

1. R. Fagan, project title “Magnetron Sputtering System”, Nano and Micro-Systems Research Lab, Mechanical

& Mechatronics Engineering Department, 2006-

2. J. Sajewski, project title “Bi-based Superconducting Composite Cables”, Texas A&M University, Mechanical

Engineering Department, 2001-2003.

_________________________________________________________________________________

HIGH SCHOOL TEACHERS TRAINED (USA-NSF GK-12 PROGRAM)

(http://peer.tamu.edu/nsfpages/nsf_fellowsgrad.shtml)

_________________________________________________________________________________

PH.D. COMMITTEE MEMBERSHIPS (NOT INCLUDING OWN STUDENTS) 1. Member PhD Comprehensive, Robert Liang, University of Waterloo (UW), Mechanical and Mechatronics

Engineering (MME), Feb 4, 2015

2. Member PhD Comprehensive Jingyi Wang, UW, MME, Oct15, 2014

3. Member PhD Comprehensive, Ehsan Marzbanrad, UW, MME, Sept 10, 2014

4. Member PhD Comprehensive, Martin Blake, UW, MME, Sept 12, 2014

5. Member PhD Defense Mohammed AlShareef, UW, Electrical and Computer Eng (ECE), Sept17, 2014

6. Member PhD Defense, Amirreza Shibadi, UW, MME, July 31, 2014

7. Member PhD Defense, Jian Zhang, UW, MME, Feb 27, 2014

8. Member PhD Defense, George Shaker, UW, ECE, Nov 20, 2013

9. Member PhD Defense, Lihua Liao, UW, MME, Nov 13, 2013

10. Member PhD Defense, Hai Jiang, UW, MME, Nov 7, 2013

http://peer.tamu.edu/nsfpages/nsf_fellowsgrad.shtml


of 18

11. Member PhD Comprehensive, Daniel Jordan Frebrowski, UW, ECE, Sept 24, 2012

12. Member PhD Defense, Jian Zhang, University of Waterloo, UW, ECE, Sept27, 2011

13. Member PhD Defense, Morvarid Karimi Ghovanlou, UW, MME, Sept 9, 2011

14. Member PhD Comprehensive, Ahmed Abdellatif, UW, ECE, Nov 24, 2011

15. Member PhD Comprehensive, Hai Jiang, UW, MME, Nov 3, 2011

16. Member PhD Defense, Minchul Jang, UW, MME, Nov 15, 2011

17. Member PhD Comprehensive, Li Hua Liao, UW, MME, Dec 5, 2011

18. Member PhD Defense, Paul Laforge, UW, ECE, 2010

19. Member PhD Defense, Khatije Bayat, UW, UW, ECE, May 08, 2009

20. Member PhD Comprehensive, Minchul Jang, UW, MME, Dec.9, 2008

21. Member PhD Defense, Jae-Sik Lee, UW, MME, July 18, 2008

22. Member PhD Comprehensive, Aashish S. Shah, UW, MME, March 20, 2008

23. Member PhD Defense, Bruce Williams, UW, MME, Oct 27, 2007

24. Member PhD Comprehensive, Khatije Bayat, UW, ECE, Sep 27, 2006

25. Member PhD Comprehensive, Paul Laforge, UW, ECE, Jul 25, 2005

26. Member PhD Comprehensive, Bruce Williams, UW, MME, April 18’05

27. Member PhD Comprehensive, Jae-Sik Lee, UW, MME, Jun 07, 2005

28. Member PhD Comprehensive, Chun Chiu, UW, MME, 2004

29. Member PhD Defense, Hasan Coskun, Texas A&M University, Mathematics, 2003

30. Member PhD Comprehensive, Taner Sumesaglam, Texas A&M University, Electrical Eng, 2002

External Reviewer PhD Defense Examination Committee 1. Keekyoung Kim, University of Toronto, Mechanical & Industrial Eng. Dept., Nov.20, 2008

2. Ko-Lun Brandon Chen, University of Toronto, Mechanical & Industrial Eng. Dept., Sept 3, 2013

3. Jonathan Lueke, UAlberta, Mechanical Eng. Dept., March 12, 2014

4.

_________________________________________________________________________________

SUPERVISION OF UNDERGRADUATE STUDENTS

(79 students including 46 UW Nanorobotic Team Members)

1. Waterloo-Nano-Robotics Team (46 students), project title: “Developing novel methods of manipulating

micron sized robots with unparalleled precision”, the group was ranked 1st in Shanghai at ICRA2011, 1

st in

Germany at ICRA2123, and 3rd

in Alaska at ICRA2010 and award IEEE Canadian Chapter award,

http://www.uwnrg.org/, Nanotechnology Engineering (NT), UW, 2007-present

2. Marshall Mykietyshyn, project title: “MEMS”, UW, MME, Jan, 2015-present

3. Kojo Adjei-Afriyie (co-op), project title: “Nanofabrication”, UW, Chem. Eng, NIMS, Japan-UWaterloo

Exchange Program, Sept, 2014-present

4. Aravind Bathini Ramaraju (co-op), project title: “Nanofabrication”, UW, Chem. Eng, NIMS, Japan-

UWaterloo Exchange Program, Sept, 2014-present

5. Beichen Li (co-op), project title: “Design of a Gas Sensor”, UW, MME, May 2014-present

6. Ken Wong (co-op), project title: “Design of a Vibrometer for Fatigue Testing”, UW, MME, May-Sept, 2014

7. Jeongcheol (JC) Seok (co-op), project title: Design of a Vibrometer for Fatigue Testing”, UW, MME, May-

Sept, 2014

8. Jerry Han (co-op), project title: “NEMS Packaging” UW, MME, May-Sept, 2014

9. Evan Li (co-op), “NEMS Packaging”, ECE, May-Sept, 2014

10. Ryan Joseph (co-op), project title: NEMS Packaging”, UW, NT, May-Sept, 2014

11. Nirushan Udayakumar (co-op, RA), project title: “Graphene for Speed Electronics for Avionics and Space

Applications” UW, NT, Sep 2013-

12. Apratim Chakraborty (co-op, RA), project title: “Graphene for Speed Electronics for Avionics and Space

Applications” UW, ECE, Sept 2013-Sept 2014

13. Yasir Sawadi (co-op), project title: “Non-Destructive-testing for MEMS”, UW, MME, May 2013-September

2013

14. M. Mehdi Kamla (co-op), project title: “Frequency Modulated MEMS Gyroscope Fabrication”, UW-MME,

May 2013-September 2013

http://www.uwnrg.org/


of 18

15. Paul Kaufhold (co-op), project title: “System Feedback for Frequency Modulated MEMS Gyroscope”, UW-

MME, May 2013-September 2013

16. Wuhan Liu, (NSREC-USRA): project title: “Nano-imprinting”, UW-MME, Sept. 2011-2012

17. Max Palumbo (JSPS Fellow), project title: “Y-Based Nano SQUIDs”, UW-MME, Sept 2011-2012

18. Mina Fouad, (NSERC-USRA), project title: “Fabrication of Nanowires & Tubes Using Magnetron

Sputtering”, UW-MME, Jan 2009-May 2009; Sept 2010-Jan 2011

19. Michael Kwan (NSREC-USRA): project title: “Nanoscale Materials Manufacturing Using Vacuum

Technology”, UW-MME, Jan 2009-May 2009

20. Zeynep Saka (Computer Engineering undergrad research co-op student), project title: “Lab-View Simulation

for MEMS Levitation”, UW-MME, Jan 2009-May 2009

21. Victor Shadbolt, (URA-Undergraduate Research Assistant), project title: “the Design and Simulation of an

Ultra-High Frequency Oscillator”, UW-Nanotechnology Eng, Jan 2008- May 2008

22. Jessie Brenneman (ME 481), project title: “Brazing of CNTs for Light Bulbs”, University of Waterloo, UW-

MME, Jan 2008 – May 2008

23. Andrew Cheng (ME 481), project title: “Brazing of CNTs for Light Bulbs”, University of Waterloo, UW-

MME, Jan 2008- May 2008

24. Brian Langelier (ME 481), project title: “Dispersion of Carbon –Nano-Tube Bundles”, UW-MME, completed

on August 2007

25. P. Enns (ME 482), project title: “Electro-deposition of Magnetic Films”, UW-MME, completed on May 2007

26. E. Wang (ME 482), project title: “Separation & Joining of Carbon Nano Tubes”, UW-MME, Graduate

student at Management Science of University of Waterloo, completed on May 2007

27. R. Zhou (ME 482), project title: “Separation & Joining of Carbon Nano Tubes”, UW-MME, completed on

May 2007

28. A. Pai (ECE 499), project title: “Setting the Foundation for Photon Detection with Superconductors, UW-

Electrical and Computer Engineering, completed on August 2005.

29. S. Manji (ME 481, project title: “High Temperature Superconducting Thin Films”, UW-MME, completed on

August 2005

30. R. Samy (ME 482), project title: “Theoretical Simulation of Failure Analysis in Ni-Thin Films Fabricated by

NVD”, UW-MME, completed on December 2005

31. S. Abdallah, exchange student from American Beirut University, project title: “Optimization of

Optical Computer Switches”, UW-System Design Engineering, completed on August 2004

32. J. Morrison, B.Sc. graduation project, project title: “Evaluation of Current Welding Procedures for Control of

Weld Metal and Heat Affected Zone in Normalized AISI 4130 Thin-Walled Tubing”, Texas A&M University

(TAMU), Mechanical Engineering Department (ME), completed on August 2003

33. J. Monson, B.Sc. graduation project, project title: “Finite Element Model Selection for Ceramic Fiber

Reinforced Metal Matrix Composites”, TAMU-ME, completed on August 2003

34. J. Noel, senior year project, project title: “Self-assemble Large Arrays of Magnetic Particles, TAMU-ME,

completed on May 2003

________________________________________________________________________________

COURSES TAUGHT

Undergraduate

University of Waterloo, Ontario, Canada Winter 2015, Mechanical Engineering (ME) 115: Structure & Proper of Materials, 0.5 credits, 119 students

Winter 2015, Mechanical Engineering (ME) 596: Introduction to Nano Structures, 0.5 credits, 16 students

Fall 2014, Mechanical Engineering (ME) 235: Materials Science and Engineering, 0.5 credits, 59 students

Winter 2014, Mechanical Engineering (ME) 596: Introduction to Nano Structures, 0.5 credits, 15 students

Fall 2013, Mechanical Engineering (ME) 235: Materials Science and Engineering, 0.5 credits, 56 students

Winter 2013, Mechanical Engineering (ME) 115: Structure & Proper of Materials, 0.5 credits, 115 students

Winter 2012, ME 533: Non-metallic and Composite Materials, 0.5 credits, 59 students

Spring 2011, Mechatronics Engineering (MTE) 111: Structure & Proper of Materials, 0.5 credits, 127 students

Spring 2009, ME 596: Introduction to Nano Structures (Developed), 0.5 credits, 4 students

Spring 2009, ME 435: Industrial Metallurgy, 0.5 credits, 39 students


of 18

Fall 2008, ME 596: Introduction to Nano Structures (Developed), 0.5 credits, 4 students

Spring 2008, MTE 111: Structure & Proper of Materials, 0.5 credits, 115 students

Fall 2007, ME 435: Industrial Metallurgy, 0.5 credits, 40 students

Spring 2007, MTE 111 (Revised): Structure & Proper of Materials, 0.5 credits, 107 students

Spring 2007, ME 215: Structure & Properties of Materials, First Time Taught, 0.5 credits, 106 students

Fall 2006, ME 435: Industrial Metallurgy (Revised), 35 students

Spring 2006, MTE 111: Structure & Properties of Materials, 116 students

Spring 2006, ME 435: Industrial Metallurgy, First Time Taught, 40 students

Fall 2005, ME 230: Control of Properties of Materials, First Time Taught, 0.5 credits, 83 students

Spring 2005, MTE 111 Structure & Properties of Materials, 114 students

Spring 2004, MTE 111: Structure & Properties of Materials, First Time Taught, 108 students

Texas A&M University, Texas, USA Summer 2003, Engineering (ENGR) 213: Introduction of Materials Engineering, 3 credits, 80 students

Spring 2003, Mechanical Engineering (MEEN) 360 (Revised): Materials and Manufacturing Selection in Design, 4

credits, 80 students

Fall 2003, MEEN 360: Materials and Manufacturing Selection in Design Lab, 96 students

Fall 2002, MEEN 467: Mechanical Behavior of Materials, First Time Taught, 3 credits, 40 students

Spring 2002, MEEN 360: Materials and Manufacturing Selection in Design, 90 students

Fall 2001, MEEN 360: Materials & Manufacturing Selection in Design, First Time Taught, 80 students

Summer 2001, ENGR 213: Introduction of Materials Engineering, First Time Taught, 3 credits 78 students

Spring 2001, MEEN 340: Structure & Mechanical Properties of Materials, First Time Taught, 4 credits, 90 students

Fall 2000, ENG 111: Introduction to Engineering, First Time Taught, 2 credits, 120 students

Summer 2000, Physics (PHY) 218: Freshmen Mechanics, 4 credits, 100 students

Spring 2000, PHY 218: Freshmen Mechanics, 100 students

Fall 1999, PHY 218: Freshmen Mechanics, First Time Taught, 100 students

Graduate

University of Waterloo, Ontario, Canada Fall 2014, ME 738: Materials for Nano- & MEMS, 0.5 credits, 8 students

Winter 2014, ME 739: NEMS Packaging, 0.5 credits, 6 students

Fall 2013, ME 738: Materials for Nano- & MEMS, 0.5 credits, 7 students

Fall 2012, ME 632: Experimental Methods in Materials Engineering, 0.5 credits, 14 students


Fall 2011, ME 632: Experimental Methods in Materials Engineering, 0.5 credits, 14 students

Spring 2011, ME 738: Materials for Nano- & MEMS, 0.5 credits, 5 students

Fall 2010, NANO 701E: Nano-mechanics, First Time to be taught, 0.5 Credits

Spring 2009, ME 632: Experimental Methods in Materials Engineering, First Time Taught, 0.5 credits, 27 students


Fall 2007, ME 747 (developed): Logistics in Nanotechnology, First Time Taught, 0.5 credits, students,

Fall 2007, ME 738 (developed): Special Topics in Materials: Materials for Nano- & MEMS, 0.5credits,

Fall 2006, ME 738: Materials for Nano- & MEMS, 3 students

Fall 2005, ME 738: Materials for Nano- & MEMS, 5 students

Texas A&M University, Texas, USA Fall 2003, Materials Science and Engineering (MSEN) 601: Materials Science and Engineering I, 4 credits

Fall 2003, Mechanical and Aerospace Engineering-Mechanics and Materials (MEMA) 614 (revised): Physical

Phenomena in Materials, 3 credits, 21 students

Spring 2003, MEMA 609 (revised): Materials Microstructure & Property Relations, 3 credits 18 students

Fall 2002, MEMA 614: Physical Phenomena in Materials, 20 students

Spring 2002, MEMA 609: Materials Microstructure & Property Relations 17 students

Fall 2001, MEMA 614: Physical Phenomena in Materials, First Time Taught, 21 students

Spring 2001, MEMA 609: Materials Microstructure & Property Relations, First Time Taught, 20 students


of 18

Spring 2000, PHY 689a (developed): Experimental Techniques in Materials Science, 3 credits, 7 students

Fall 1999, PHY 689b (developed): Structural Imperfections in High-TC Superconducting Oxides, 3 credits, 10

students

_______________________________________________________________________________

SERVICE

Professional 1. UW Faculty Mentor for Canadian Mechanical Engineering Society for Student Chapter, 2008-

2. Member of IEEE, 2005-

3. Deputy Editor-in-Chief, Journal of Engineering Science and Technology (JESTECH), Elsevier, 2013-

4. Editor, Scholarena Journal of Nanoscience and Nanotechnology (SAJNN), 2014-

5. Editor, Austin Journal of Nanomedicine & Nanotechnology, 2013-

6. Editor, Austin Journal of Robotics & Automation, 2014-

7. Editor, Journal of Nanoscience & Technology (Symbiosis), 2013-

8. Editor, HSOA Journal of Nanotechnology: Nanomedicine & Nanobiotechnology, 2014-

9. Editor, OMMEGA Journal of Nanotechnology and Materials Science, 2014-

10. Editor, Journal of Science and Engineering, Cankaya University, Ankara, Turkey, 2010-present

11. Advisory Board Member, Conferences for Nanojoining and Microjoining, http://www.nmj2014.org/

12. Member of Pi-Tau-Sigma, US National Mechanical Engineering Honors Society, 2003

13. Member American National Society of Professional Engineers, 1998-

14. Member of American Physics Society, 1998 -

15. Member of Aoba-Sendai Industrial Association, 1997 - 1998

16. Member of American Society for Materials, 1994 –

17. Honorary Member ISEM, University of Wollongong, 1994 -

18. Member of Institution for Engineers, Australia, 1992 –

19. Member of International Union for Crystallographers, 1989 -

20. Member of Turkish Electron Microscopy Society, 1989 -

21. Member of Turkish Chambers of Engineering, 1989 –

University

22. Internal Reviewer, University Waterloo-Wilfrid Laurier University Join Graduate Program on Geography,

2015

23. Member Collaborative Graduate Nanotechnology Program Technical Committee, UW, 2006-

24. Founding Member of Collaborative Nanotechnology Graduate Program, 2008-

25. Member Graduate Program Reviewers, UW, 2014-

26. Member Faculty of Math Council, UW, 2010-

27. Faculty Mentor, UW-Nano-robotic Group (46 undergraduate students), 2007-

28. Coordinator Academic Exc. Program Between ETU, Turkey and Waterloo Universities, 2006-

29. Coordinator Acad. Exc. Program Between Yamagata, Japan and Waterloo Universities, 2007-

30. Coordinator Acad. Exc. Program Between Tokyo University of Science TUS, Japan and University of

Waterloo, 2008–

31. Member Engineering Graduate Studies Committee, UW, 2005 –2009

32. Member Faculty Search Committee, DACA-E&CE for Photonics & Nanotechnology Faculty Searches, UW,

2005-present

33. Member Faculty Search Committee, DACA-E&CE for Nano-Faculty Search, UW, 2008-

34. Member CFI Leading Edge Proposal Preparation Committee for Nano/Quantum Proposal, UW, 2005

35. Co-PI for Strategic Research Initiative on Nanotechnology Proposal (ORF), UW, 2005

36. Member Faculty of Engineering Council, UW, 2004-2009

37. Member LIAR Engineering Faculty, UW, 2004-present

38. Coordinator Academic Exchange Program Between Bilkent University (Turkey) & UW, 2004 -

39. Founding Graduate Faculty Member of Mat. Sci. & Eng. Program, TAMU, 2003 – present

40. Member of Graduate Faculty (Adjunct) of the Mechanical Eng. Dept., TAMU, 2003 – present

41. Faculty Member of Texas Engineering & Experimentation Station (TEES), 2000 -2004

42. Faculty Member of Electron Microscopy Center, TAMU, 2000 - 2004


of 18

Departmental

1. Member Tenure and Promotion Committee, Mech. & Mechatronics Eng. Dept., UW, 2011

2. Member Tenure and Promotion Committee, Mech. & Mechatronics Eng. Dept., UW, 2014

3. Member (Non-voting) Nanomaterials Faculty Hire Recruitment Committee, Mech. & Mechatronics Eng.

Dept., UW, 2014

4. Member Chair Pool for PhD Comprehensive and Defense Exams, 2011-present

5. TA Workshop Supervisor, Mech. & Mechatronics Eng. Dept., UW, August, 2007

6. Coordinator, Collaborative Nanotechnology Graduate Program, Mech. & Mechatronics Eng. Dept., UW,

2009-present

7. Mechatronics Engineering 1B Class Teacher, Mech. & Mechatronics Eng. Dept., UW, 2004-06

8. Member Industrial Training Program Committee, Coop in Mech. & Mechatronics Engineering International

Exposure, Mech. & Mechatronics Eng. Dept., UW, 2005

9. Member Mechatronics Engineering Program Research Committee, Mech. Eng. UW, 2004-pres

10. Course coordinator MTE 111, Mech. & Mechatronics Eng. Dept., UW, 2004-present

11. Course coordinator MEEN 360, Mech. Eng. Dept., TAMU, 2000 – 2004



14. Materials Division Committee Member for Ph.D. Qualifying Exam, Mech. Eng. Dept., TAMU, 2000-04

15. Departmental Coordinator for the Materials Science & Engineering Graduate Program, Mech. Eng. Dept.,

TAMU, 2002-2004

16. Departmental Coordinator for the Texas Charter School Program, Mech. Eng. Dept., TAMU, 2002-04

17. Coordinator Undergraduate Research Web Site, Mech. Eng. Dept., TAMU, 2000-04

18. Condensed Matter Division Committee Member for Ph.D. Qualifying Exam, Physics Dept., TAMU, 1999-00

________________________________________________________________________________

REVIEW OF JOURNAL OR CONFERENCE PAPERS & RESEARCH PROPOSALS

Journal Papers

1. Physica C, Elsevier, 1997-

2. IEEE Transaction on Applied Superconductivity, 2000-

3. IEEE Sensor Journal, 2006-

4. Superconducting Science and Technology, Institute of Physics, 1998-

5. Journals of Alloys and Compounds, Elsevier, 1998-

6. Australian Ceramic Society Journal, 1998-

7. Turkish Electron Microscopy Journal, 1998-

8. Nanotechnology, Institute of Physics, 2006-

9. Measurement Science and Technology, Institute of Physics, 2005-

10. Composite Science & Technology, Elsevier, 2007-

11. Journal of Physics D, Institute of Physics, 2006-

12. Euro-physics Letters, Institute of Physics, 2007

13. IEEE Transaction on Electronic Packaging Manufacturing, 2010-

Conference Papers 1. European Conference on Applied Superconductivity (EUCAS), 2005

2. Applied Superconductivity Conference (ASC), 2004

3. Applied Superconductivity Conference, 2002

4. Applied Superconductivity Conference, 2000

Research Proposals& CRC Applications 1. MITECS, 2014-present

2. NSREC Industrial Research Chair (IRC) Report Review, École Polytechnique, 2013

3. NSREC-Strategic Grants, INRS, July 2013-present

4. NSREC, EWR Steacie Memorial Fellowship, 2011-present


of 18

5. NSREC Industrial Research Chair (IRC) Application, École Polytechnique, Site Visit to Montreal, August 3,

2011

6. NSREC-Strategic Grants, University of Toronto, July 2011-present

7. NSREC, EWR Steacie Memorial Fellowship, McGill University, Montreal, October 2011

8. BCIC-Young Investigators, 2010-present

9. Canadian Research Chair (CRC) Tier I and II Applications, 2008-present

10. NSREC-Discovery, 2007-present

11. The Europe 7th Framework Program for Research & Technology Development Proposals for Y2007-13, Feb

2007-present

CURRICULUM VITAE PROFESSIONAL INTERESTS · CURRICULUM VITAE _____ PROFESSIONAL INTERESTS Nano and...

Documents

Transcript of CURRICULUM VITAE PROFESSIONAL INTERESTS · CURRICULUM VITAE _____ PROFESSIONAL INTERESTS Nano and...