CURRICULUM VITAE

PERSONAL DATA

1 FULL NAME: EGBE-NGU NTUI OGORK

2 DATE OF BIRTH: 3RD MARCH, 1964

3 PLACE OF BIRTH: EWELLE-MAMFE, CAMEROON

4 NATIONALITY: CAMEROONIAN

5 CONTACT ADDRESS: DEPT. OF CIVIL ENGINEERING

BAYERO UNIVERSITY,

PMB 3011 KANO, NIGERIA

E-MAIL:egbenguogork@yahoo.com,

enogork.civ@buk.edu.ng

TEL: 08038464283

6 MARITAL STATUS: MARRIED

7 STATE OF HEALTH: GOOD (NO DISABILITY)

8 QUALIFICATIONS: B.Sc (HONS) BUILDING TECHNOLOGY

(1989)

M.Sc (ENG) STRUCTURAL ENGINEERING (1990)

PhD CIVIL ENGINEERING (STRUCTURAL

ENGINEERING) (2015)

9 EDUCATIONAL HISTORY:

a) EDUCATIONAL INSTITUTIONS ATTENDED WITH DATES;

PRIMARY: C.B.C. SCHOOL, EWELLE-CAMEROON

(1971-1978)

SECONDARY: GOVT. HIGH SCHOOL, MAMFE-CAMEROON (1978-

1983)

C.C.A.S., KUMBA-CAMEROON (1983-1985)

TERTIARY: THE VICTORIA UNIVERSITY OF MANCHESTER,

ENGLAND (1986-1989)

THE UNIVERSITY OF LIVERPOOL, ENGLAND (1989-

1990)

BAYERO UNIVERSITY, KANO, NIGERIA (2009-2014)

b) ACADEMIC QUALIFICATIONS WITH DATES:

i FIRST SCHOOL LEAVING CERTIFICATE, 1978

ii GENERAL CERTIFICATE OF EDUCATION (GCE)

ORDINARY LEVEL, 1983

iii GENERAL CERTIFICATE OF EDUCATION (GCE) ADVANCED

LEVEL, 1985

iv B.Sc (HONS) DEGREE IN BUILDING TECHNOLOGY, 1989

v M.Sc (ENG) DEGREE IN STRUCTURAL ENGINEERING, 1990

v PhD CIVIL ENGINEERING (STRUCTURAL ENGINEERING) (2015)

10 EMPLOYMENT HISTORY:

a) Project Manager in the construction of a three storey, eight apartment block, Biyem

Assi, Yaounde, Cameroon (1991-1992)

b) Structural Engineer with Toni Astel and Associates, Zaria, Nigeria

(1993)

c) Lecturer II, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1994 –

1997)

d) Lecturer I, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1997 –

2009)

e) Senior Lecturer, Dept. of Civil Engineering, Bayero University, Kano, Nigeria

(2009 – 2015)

f) Associate Professor, Dept. of Civil Engineering, Bayero University, Kano, Nigeria

(2015 – Till Date)

g) Part time Structural Engineer with COBAG PRIME NIGERIA LTD, Kano,

Nigeria. (2002 – 2007)

11 WORKING EXPERIENCE

a) Supervision of the construction of a three storey, eight apartment block, Biyem

Assi, Yaounde, Cameroon (1991-1992)

b) Design of some medium rise buildings with Toni Astel and Associates, Zaria,

Nigeria (1993)

c) Supervision of many Under Graduate, Post Graduate Diploma and Master in Civil

Engineering projects and dissertations in structural Engineering and Civil

Engineering materials (1994 – till date)

d) Design of some residential apartment buildings, over head steel tanks and towers,

culverts, etc. in Kano and its environs with COBAG PRIME NIGERIA LTD, Kano,

Nigeria. (2002 – 2007)

12 COURSES TAUGHT

CIV 3309: STUCTURAL ANALYSIS I 1994-2002

CIV 3307: DESIGN OF STRUCTURAL ELEMENTS I 1994-1999,2006/2007

CIV 4202: STRUCTURAL ANALYSIS II 1994-2014

CIV 5306: DESIGN OF TIMBER STRUCTURES 1994-TILL DATE

CIV 5405: DESIGN OF STRUCTURAL ELEMENTS III 2007- TILL DATE

TEC 3302: COMPUTATIONAL TECHNIQUES 2005-2013

CIV 8315: ADVANCED REINFORCED CONCRETE STRUCTURES

1999-TILL DATE

CIV 8316: ADVANCED STEEL DESIGN 1999-TILL DATE

CIV 7314 (7306): REINFORCED CONCRETE DESIGN 2000- TILL DATE

CIV 7316: STRUCTURAL STEEL DESIGN 2000-2007

CIV 7308: THEORY OF STRUCTURES 2006-2007

CIV 7304: STRUCTURAL ANALYSIS I 2007-2015

CIV 7305: STRUCTURAL ANALYSIS II 2007-2015

13 RESEARCH INTEREST

Has undertaken and supervised researches in construction materials, and in structural

engineering. This include researches in locally available waste materials for use in

construction of low cost housing, reliability assessment of civil structures, and various

kinds of analytical research in structural engineering.

14 BACHELOR OF ENGINEERING (CIVIL ENGINEERING) PROJECTS SUPERVISED

1) Mohammed Hamisu Garba (1995): Effect of Partial Replacement of Cement with

Makuba on the Strength Properties of Concrete

2) Mahmoud Ahmed Mannir (1996): Properties of Laterized Makuba as a Rendering

Material

3) Nuruddeen Muhammad Musa (1997): An Assessment of the Structural use of Azara

as a Composite Beam in Low Cost Housing

4) Vincent I. Tyoager (1997): Effect of Partial Replacement of Cement with Laterite

on the Characteristic Compressive Strength of Concrete and Water Cement Ratio

Moderation

5) Nasiru Sani Inuwa (1999): Design of Reinforced Concrete Bridge over River

Tatswarki in Dawakin-Kudu Local Government Area, Kano State

6) Mu’azu Mohammed Abdullahi (1999): Design of an indoor Swimming Pool and

Recycling Plant for Water Treatment at Bayero University Sports Complex, Old

Campus

7) Sadiq Rilwan Kadara (1999): An Investigative Study of Improving the Properties

of Laterite with Rice Husk Ash in th Construction of Low Cost Building Blocks

8) Nafiu Hassan Hanga (2000): Design of a Braced Steel Tower supporting an

Elevated Water Tank proposed at Kabuga Housing Estate, Kano

9) Nuhu Mustapha (2000): Design of Pedestrial Timber Bridge at the Bush Canteen

at Mallam Aminu Kano International Airport, Kano

10) Mohammed Hadi Ibrahim (2000): Design of a Structural Steel Warehouse and Bill

of Engineering Measuremnts and Evaluation proposed for Kaduna North Local

Government.

11) Michael Onimisi Salami (2000): Design of the proposed Reinforced Concrete

Dome Mosque at Zango Dakata, Kano State

12) Nurudddeen Yusuf (2001): Analysis and Design of Reinforced Concrete Sub-

surface Water Reservoir at Sabon Gari Market, Kano

13) Jimoh Omoh Sule (2002): Design of Reinforced Concrete Swimming Pool at Sport

Arena, FCE Kano

14) Morou Adam (2003): Analysis and Design of a Reinforced Concrete Double Cell

Box Culvert on Road Niamey-Say, Niger Republic

15) Adamu Hussaini and Ahmed Saleh Hassan (2005): An Investigative Study of the

Influence of Ground Kargo Fruit on the Engineering Properties of Lateritic Soils

(A Case Study of Kano Laterites)

16) Zakari Umar Farouq and Ahmed M. Osman (2005): Design and Performance of a

Modified Septic Tank and Soak Away Sewage System

17) Nasiru Badamasi (2007): Computer Aided Design of a proposed Three Storey

Office Complex for National Union of Teachers (NUT) Kaduna

18) Isyaka Abdulkadir (2008): An Investigation into the Use of Coconut Shell as

Coarse Aggregate in Lightweight Concrete

19) Zainab Ango Murtala (2008): The Bond Strength of Rice Husk Ash Concrete

20) Muhammad Kabir Is’haq (2008): Software Development for the Analysis and

Design of Reinforced Concrete Hollow Block Slab using VISUAL BASIC 6.0

Programming language

21) Haruna Garba Pasali (2008): An Investigation into the use of Katsi as an Admixture

in Mortar

22) Abubakar Alhassan Abubakar (2008): Assessment of the Strength of

Reinforcement Bars used in Nigeria

23) Hassan Ali (2008): Design of proposed Three Storey Shopping Mall at Utako

District, Abuja

24) Abdulkadir Usman Mohammed (2010): Effect of Rice Husk Ash/ Katsi as a

Pozzolana in Mortar

25) Nasir Kabir (2010): Effect of Rice Husk Ash and Katsi as Partial Replacement of

Cement in Cement-Sand Mortar

26) Auwalu Yusuf (2010): Effect of Katsi and Rice Husk Ash as Partial Replacement

of cement in Sandcrete Blocks

27) Abdulqadir Bala Adamu (2010): Effect of Rice Husk Ash/Katsi as a Pozzolana in

Concrete

28) Salisu Abba (2010): Effect of Groundnut Shell Ash and Steel Slag on the Properties

of Mortar

29) Abdurrauf Mukhtar Gora (2011): The use of Calcium Carbide Waste as Admixture

in Mortar

30) Mustapha Nasir Said (2011): The Effect of Corn Cob Ash as Partial Replacement

of Cement in Mortar

31) Abba Lawan Isah and Murtala Sani (2012): The Effect of Sawdust Ash on the

Compressive Strength of Sandcrete Blocks

32) Hafiz Ibrahim (2012): Properties of Corn Cob Ash as Admixture in Sandcrete

Blocks

33) Muhammed Mubarak Haruna and Muhammad Lawal Abdullahi (2012): Properties

of Groundnut Shell Ash Concrete Improved with Bagasse Ash

34) Muhammad Bashir Yusuf and Mohammed Shamsudeen Usman (2012): The use of

Quary Dust as a Partial Replacement of Cement in Concrete

35) Adam Muhammad Sharu and Jibril Nuhu Jibril (2013): Experimental Study of the

Effect of Nominal Size of Coarse Aggregate on the properties of concrete

36) Muda’im Inuwa Dandago (2013): Effect of Guinea Corn Chaff Ash as Partial

Replacement of Cement in Mortar

37) Mubarak Salisu and Usman Ahmad Aliyu (2013): Properties of Laterized Concrete

with Rice Husk Ash as Pozzolana

38) Abubakar Dauda Yahaya and Ahmad Umar Turaki (2013): Properties of Laterized

Concrete with Rice Husk Ash as Pozzolana

39) Mustapha Garba Jama’a and Balarabe Yusuf Mohammed (2014): Effect of

Watermelon Waste Ash as Admixture on the Properties of Concrete

40) Bello Adavize Abel and Ikemefune Mohanye (2014): The Use of Calcium Carbide

Waste as Admixture in Sandcrete Blocks

41) Sadiq Yau (2014): Structural Steel Warehouse Design for Storage

42) Shittu Usman Chidawa (2014): Software Development for Structural Design of

Box Culvert using VISUAL BASIC

43) Luqman Yusuf and Abdullahi Abdulaziz (2014): Reliability Based Assessment of

Timber Beam in Fire

44) Lonping Tazou Olivier and Femi Tosin Lawal (2015): Effect of Aggregate Size on

Rice Husk Ash Concrete

45) Isah Salihu Adeku (2015): Effect of Partial Replacement of Natural Coarse

Aggregate with Coconut Shell Aggregate on the Tensile Strength of Concrete.

15 POSTGRADUATE DIPLOMA IN CIVIL ENGINEERING PROJECTS SUPERVISED

1) Adediran Akinade David (2001): Structural Design and Detailing of a Three Cell

Box Culvert on Karaye-Kwanyawa Road, Kano State

2) Nuhu Mohammed Otohinoyi (2002): A Comprehensive Design and Detailing of a

Two Storey Office Complex to be situated in Abuja, FCT

3) Thomas Akata Ibu (2002): Reinforced Concrete Design of Bayero University Kano

Shopping Complex

4) Aiyegoro Olalere Frank (2002): Structural Design of an Overhead Steel Tank with

supporting Steel Tower for Senior Staff Quarter, Nigeria Railway Corporation,

Nassarawa, Kano

5) Fadeyi Lawrence Olaniyi (2002): Structural Design and Detailing of a Residential

Building (Duplex) making use of Flat Slab

6) Onuigbo Callistus Chibueze (2002): Design and Analysis of a Two Storey Hostel

Building to BS 8110 (1985) at Bayero University Kano New Site

7) Apeh Ocholi Adejoh Samuel (2002): Structural Design and Detailing of a Lecture

Theatre in Reinforced Concrete to BS 8110 for Federal Polytechnic Idah

8) Isayinka Daniel Olusegun (2002): Design and Detailing of a Storey Building Office

Development

9) Bala Garba Miringa (2003): The Quality of Concrete Mixed with Turbid, Saline

and Non Turbid Water, respectively

10) Mukaila Adejare Adepoju (2003): Reinforced Concrete Design, Detailing and Bill

of Quantities of a Three Storey Training Centre for NNPC at Kaduna to BS 8110

11) Bawa Muhammad Tuga (2003): Computerized Spreadsheet Program for Design of

Simple Beams and Slabs

12) Muhammad Inuwa (2003): Computer Aided Design of One Storey Reinforced

Concrete Residential Building Estate

13) David Adamu Balami (2003): Utilization of Sawdust as Replacement of Sand in

Lightweight Concrete

14) Bilyaminu Usman Abdullbaki (2003): The Quality of Sandcrete Hollow Block for

Floor Production in Kano

15) Popoola S. Raymond (2003): Design of a Reinforced Concrete Bridge Across River

Odo-Otin, Inisa-Ikirun Way, Osun State

16) Gabriel Aderemi Adaramoye (2003): Design, Detailing and Bill of Quantities of a

Three Storey Sixteen Flats Residential Building, Staff Quarter at Federal College

of Education, Kano

17) Samson Kunle Fasein (2005): Analysis and Design of a Two Storey Office

Complex for of Engineering, Kano University of Technology, Wudil Kano State

18) Usman Mohammed Bakundi (2005): Analysis, Design and Detailing of a Ten

Storey Office Complex for Nigerian National Petroleum Corporation (NNPC)

Lagos

19) Abdulai Fatai Ajibade (2005): Structural Design and Detailing of a Two Storey

Shopping Complex on a Water Logged Soil at Garki District, Abuja

20) Abdulazeez Seidu Suleiman (2005): Design of a Cylindrical Reinforced Concrete

Surface Water Reservoir for Lokoja, Kogi State

21) Awosika Olawale (2005): Analysis and Design of a Two Storey Building for NECO

Regional Office, Kano

22) Kalli Mallam Baba (2006): Structural Design of a Three Storey Reinforced

Concrete Office Block at Sharada, Kano

23) Minkailu Mohammed Ibrahim (2006): Structural Design of Overhead Steel Water

Storage Tank for Lokogwoma Housing Estate, Ganaja Road, Lokoja, Kogi State

24) Kabiru Salisu Kiru (2006): Design of a Reinforced Concrete Bridge Across River

Kamanda in Kiru Local Government Area, Kano State

25) Alhaji Aliyu Umar (2006): Design of a Reinforced Concrete Bridge over River

Musa along Bida-Lemu Road, Niger State

26) Rabiu Abdullahi (2006): Design of Flood Control Measures for River Gagare at

(Yarkuka) Area, Isa Town

27) Yusuf Danladi Bello (2006): Design of Two Storey Building at Nigerian Law

School Campus Bagauda, Kano

28) Amamat O. Adeyemi (2006): Design of Overhead Steel Tank Tower for Kabala

West, Kaduna

29) Ijituji Olabanji Henry (2008): Analysis and Design of a Reinforced Concrete Single

Cell Box Culvert along Jikwoyi- Karshi Road, Abuja, FCT

30) Abubakar Salisu (2008): The use of Quarry Dust as a Partial Replacement of Sand

in Concrete

31) Kamaru Kareem (2008): Design of proposed Water Storage Tank on 10 m high

Tower at Bayero University Kano, New Campus

32) Ajayi Oluwarotimi Paul (2008): Design of a Football Stadium of 2000 Seating

Capacity, Bayero University Kano, New Campus

33) Auwal Abubakar Yar’adua (2008): Redesign of Reinforced Concrete Bridge across

River Dannakola along Katsina-Daura Road, Daura Local Government Area,

Katsina State

34) Ahmed Abdullahi (2008): Structural Design and Detailing of a Three Cell Box

Culvert on Garo-Godiya Road, Kabo Local Government Area, Kano State

35) Jimoh Sanusi (2008): Design of Reinforced Concrete Bridge across River Kaduna

in Rafin-Guza, Kawo Kaduna

36) Nura Usman (2008): Design of a Reinforced Concrete Bridge across River Muduru

along Katsina-Daura Road, Katsina State

37) Ikeh Josephine (2008): Characteristic Strength of Indigenous Steel Bars Produced

in Nigeria

38) Amina Ebimari Saidu (2008): Investigation on Coconut Shell as Coarse Aggregate

in Lightweight Concrete

39) Suleiman Lawal (2008): Design of a Reinforced Concrete Bridge at Makurda along

Katsina-Daura Road, Katsina State

40) Umar Olushola Wahab (2008): Design of Telecommunication Steel Tower (Mast)

Station at Gwarzo village, Kano State (A Complete Cell Site 50 m high Tower)

41) Saka Abdul Fatai (2008): Redesign of a Reinforced Concrete Bridge across River

Oyun, Offa Local Government Area, Kwara State

42) Idris Shuaibu (2008): Computer Aided Reinforced Concrete Design of Three

Storey Secondary School Building at Okene, Kogi State

43) Kabiru Rogo Usman (2010): An Investigation on the use of Stone Dust as Partial

Replacement of Laterite in Block

44) Ashhabu Elkaseem (2010): An Investigation in the use of Poliostigma Thonningi

(Kalgo) Pod Ash as an Admixture in Mortar

45) Ogunlade Musibau Oladele (2011): The Impact of Performance Bonds on

Construction Projects Successful Delivery in Nigeria (A case study of FCT and

neighbouring States)

46) Abdullahi Abubakar (2011): Effect of Dyeing Waste Water on the Quality of

Concrete

47) Igboro Kayode Olu (2011): Properties of Groundnut Husk Ash Concrete with

Ground Granulated Blast Furnace Slag as Improver

48) Owabor Iguodeyala Michaelking (2012): Performance of Crushed Palm Kernel

Shell as Partial Replacement for Sharp Sand in Sandcrete Blocks

49) Yakubu Nuhu Danja (2012): Effect of Guinea Corn Chaff Ash (GCA) as Partial

Replacement of Cement on the Properties of Concrete

50) Ogbonna Nnamdi P. (2012): Software Development for Analysis and Design of

Reinforced Concrete Beams

51) Aliyu Idris Ibrahim (2012): Software Development for the Design of Reinforced

Concrete Rectangular Solid Slab

52) Babangida Mainasara (2012): Effect of Burnt Tyre Ash on the Quality of Sandcrete

Blocks

53) Momoh Imoudu (2013): Investigation of the Properties of Recycled Asphaltic

Concrete Aggregate Concrete

54) Adebayo Sumola Elizabeth (2013): Effect of Partial Replacement of Sand with

Laterite on the Properties of Sandcrete Blocks

55) Nura Adamu (2013): Effect of Guinea Corn Chaff Ash (GCA) as Admixture on the

Properties of Concrete

56) Yakubu Ali (2014): An Investigation on the causes of cracks in the T-Block

Building, Faculty of Engineering, Bayero University Kano.

57) Gbolahan Oluwashola Samuel (2015): An Investigation into the causes of cracks in

Building: A case study of Resurrection power building Kano

58) Abdulaziz Dayyabu (2015): Reliability Based Assessment of Expansion Joints in

Reinforced Concrete Slabs under the Effect of loads and Temperature Variations.

59) Akpe-Ekanem Ekanem (2016): Properties of Concrete made with Coconut Husk

Fibre as Additives.

60) Mohammadu Iliyas (2016): Properties of Concrete made with Silica Sand.

16 MASTER IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING)

DISSERTATIONS SUPERVISED

1) Muhammad Kabir Rimi (June, 2005): An Investigation into the Admixture

Properties of Kargo (Poliostigma Thonningi) Fruits Powder in Concrete.

2) Bilyaminu Usman Abdulbaki (March, 2008): Properties of Gum Arabic Mixed

Laterite.

3) Nura Mu’azu (December, 2008): Probabilistic Limit State Design Format for Hot-

Rolled Steel Beam-Column to BS 5950 (1985)

4) David Adamu Balami (November, 2008): Investigation on Rice Husk Ash Concrete

Properties.

5) Thomas Akata Ibu (November, 2008): The Effect of Curing Medium on Makuba

Concrete.

6) Hassan Othman Mohammed (December, 2008): Software Development for Design

of Timber Slab Formwork, Wall Formwork and Falsework in Accordance with BS

5268 (1991) and BS 5975 (1984).

7) Muhammed Tuga Bawa (December, 2008): Software Development for Analysis of

some Structural Elements using Finite Element Method (FEM).

8) John Wasiu (December, 2008): Reliability Based Design Format for Hollow Block

Floor.

9) Nasir Mohammed Sala Koko (November, 2008): Investigation on Katsi Residue as

Admixture in Concrete.

10) Usman Mohammed Bakundi (November, 2009): Computer Model of Beam-

Masonry Wall Interaction.

11) Jibrin Abubakar Suleiman (June, 2009): Effect of Curing Methods on Quality of

Concrete.

12) Suleiman Mohammed Laya (May, 2009): Properties of Recycled Concrete

Aggregate Concrete in Aggressive Environment.

13) Ifeolorun Monyomi Olofin (June 2009): Computer-Aided Analysis and Design of

a Simply Supported Long Span Highway Reinforced Concrete Bridge Deck/Beam

System.

14) Godwin Omofonma (March, 2010): Effects of Polypropylene Fibres on Properties

of High Strength Concrete.

15) Vincent Emhotso Michael Audu (July, 2010): Cocoa Pod Husk Ash as Admixture

in Concrete.

16) Najiyu Abubakar (August, 2010): Development of Software for the Analysis and

Design of Composite Steel Beam and Concrete Floor.

17) Muazu Bawa Samaila (August, 2010): Software Development for the Analysis,

Design and Detailing of Reinforced Concrete Slabs Based on BS 8110 (1997).

18) Araga Adamu Odovidi (July, 2010): Cassava Peel Powder as Admixture in

Concrete.

19) Modibbo Mohammed Tahir (August, 2010): Reliability Based Assessment of

Composite Steel Beam and Concrete Floor.

20) Shakir-Deen Adeshina Akinloye (August, 2010): Reliability Assessment of

Telecommunication Towers in Northen Nigeria.

21) Kudu Mohammed (August, 2010): Reliability Based Design Format of Waffle

Floor Slab to BS 8110 (1997).

22) Tsamiya Sani Ibrahim (March, 2012): Properties of Concrete made with Calcium

Carbide Waste as Admixture.

23) Isah Musa Safana (May, 2012): Reliability Based Assessment of Reinforced

Concrete Shear Wall to BS 8110 (1997).

24) Nuhu Otohinoyi Mohammed (May, 2012): An Investigation into the use of Cow

Bone Ash as Admixture in Concrete.

25) Mara Wazumtu (November, 2014): Groundnut Shell Ash as Admixture in

Concrete.

26) Solomon Ayuba (May, 2015): Properties of Concrete with Sawdust Ash as

Admixture.

27) Isyaka Abdulkadir (May, 2015): Properties of Scrap Tyre Steel Fibre Reinforced

High Performance Concrete with Rice Husk Ash.

28) Abubakar Mohammed (May, 2015): Development of a Design Program for

Reinforced Concrete Foundations using JAVA.

29) Murtala Zainab Ango (September, 2015): Reliability –Based Assessment of Timber

Footbridge Truss to Eurocode 5 (2005).

30) Abdurrazaq Kamal Nakore (September, 2015): Reliability–Based Assessment of

Timber Floor System.

31) Abdulkarim Muhammad Auwal (October, 2016): Effects of Corn Cob Ash in Self-

Compacting Concrete (SCC).

32) Haruna Daud Gussau (October, 2016): The Effect of Partial Replacement of Coarse

Aggregate with Waste Metal Bottle Caps on the Properties of Concrete

33) Aminu Maiyama Musa (June, 2017): Investigation of Ironstone Gravel as Coarse

Aggregate in Concrete

34) Rabiu Shehu Bilyaminu (June, 2017): Effect of Ironstone chippings as Substitute

for Fine Aggregate in Sandcrete Block Production

35) Nurudeen Isah Yakubu (On going): Reliability Based Evaluation of Reinforced

Concrete Bridge Columns Subjected to Dynamic Load

36) Jibrin Ishaka Jibrin (On going): Truss design optimization using Harmony Search

Method

37) Emmanuel Arubi (On going): The behavior of High Performance Polypropylene

Fibre Reinforced Cement Composite Containing Rice Husk Ash (RHA)

38) Mustapha Garba Jama’a (On going): Effect of Coconut Shell Ash as Admixture on

the Properties of Concrete

39) John Smith Abutu Simon (On going): Suitability of Date Palm Seed Ash (DPSA)

for Concrete Production

40) Usman Ahmad Aliyu (On going): Properties of Laterized Concrete using Neem

Seed Husk Ash as Admixture

41) Safiyanu Ishaq Muhammad (On going): Properties of Particle Board Produced from

Mahogany Leaves

17 PhD IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING) THESIS SUPERVISED

a) Abubakar Mohammed (On going): Properties of polypropylene fibre reinforced self

compacting concrete modified with millet husk ash

18 INTERNAL EXAMINER OF MASTER IN CIVIL ENGINEERING (STRUCTURAL

ENGINEERING) DISSERTATIONS

1) Peter W. Ominijei (2003): Gum Arabic as an Admixture in Concrete.

2) Alhassan Ibrahim Marke (Sept, 2003): Strength Assessment of Colcrete

3) Taiye W.E. Adejumo (Aug, 2004): Torsional Analysis of Shear Core, Frame Tube

and Tube-in Tube Structures

4) Akilu Muhammad (Dec, 2005): Reinforced Concrete Detailing Software

Development using Autolisp.

5) Aliyu Yau Muhammad (2005): An Investigation into the Effect of Industrial Waste

Contaminated Fine Aggregate on Concrete (A case study of Rivers Challawa, Kano

and Tatsawarki Fine Aggregates)

6) Adekia Abiola (2005): Two Dimensional Modeling of Minimum Energy Loss

Culverts using Finite Elements Method

7) Mamman Mas’udu (April, 2008): Influence of Fine Aggregate Zones on the

Compressive Strength of Concrete

8) Gabriel Aderemi Adaramoye (Feb, 2009): Three Dimensional Modeling of

Minimum Energy Loss Culverts using Finite Elements Method

9) Aaron Aboshio (Feb, 2009): Dynamic Study of Communication Masts in Northern

Nigeria

10) Musa Abdul (Feb, 2009): Development of Computer Aided Design Environment

11) Mustapha Muhammad Lawan (May, 2010): Evaluation of the Effect of Type of

Water on the Compressive Strength of Concrete

12) Pam Billy Fom (May, 2010): Evaluation of the Compressive Strength of Cement-

Cow Dung Stabilized Bricks

13) Bishir Kado (2011): Probabilistic Design for steel Beam-Column Bolted End Plate

Connection

14) Ahmed Ahmed (2012): Reliability Based Assessment of steel Plate Girder Design

to BS 5950

15) Mukhtar Mustapha Jogana (2012): Computer-Aided Analysis, Design and

Detailing of Reinforced Concrete Beam to BS 110 (1997)

16) Muhammad Idris Haruna (2012): Reliability Based Assessment of Composite

Beam under fire using Euro code 4

17) Mohammed Lawan Magaji (2012): An Investigation into the effect of Temperature

variation on the compressive Strength of Concrete.

18) Ogu Caleb Ikechukwu (May, 2015): An Investigation of the Flexural Strength of

Compressed Stabilized Reinforced Earth Beam

19) Asumba Sylvia Ozulu (May, 2015): An Investigation on the Engineering Properties

of higher and Lesser Known Timber Species in Kano market.

20) Garba Suleiman (September, 2015): Properties of Millet Husk Ash-Bitumen

Stabilized Lateritic Block.

21) Barambu Abubakar Umar (June, 2016): Reliability Based Calibration of safety

factors for the Design of a Simply Supported Steel Beam based on BS 5950 (2000)

22) Naziru Muhsin Inuwa (October, 2016): Artificial Neural Network Based Model for

Analysis of Non-Prismatic Fixed End Beams and Cantilevers using Simple

Prismatic Beams

23) Hildi Gideon Shuaibu (June, 2017): Investigation on Rice Husk Ash Concrete with

Periwinkle Shell as Coarse Aggregate

24) Mohammed Sani Abdullahi (June, 2017): Reliability Analysis of Reinforced

Concrete Bridge Deck Strengthened with Carbon Fibre Reinforced Polymer

(CFRP) subject to Corrosion.

19 RESPONSIBILITIES

a) Level Coordinator 1995-2002

b) Departmental Examination Officer 1997-1999, 2003

c) Faculty Examination Officer 2004-2006

d) Departmental PGD Coordinator 2006-2012

e) Departmental PG (M.Eng/Ph.D) Coordinator 2014/2015- Till date

f) Faculty Representative to University Committee on Examination Malpractice

and Leakages 2007-2011

g) Faculty Representative to University Committee on Qualification Irregularities

2014-Till date

20 COMMUNITY SERVICE

a) Financial Secretary Cameroon Community Association Kano, Nigeria 2001

b) President Cameroon Community Association Kano, Nigeria 2002-2006

c) Patron Cameroon Community Association Kano, Nigeria 2007-Till date

d) Member of Council St Stephen Catholic Chaplaincy Bayero University Kano,

Nigeria 2011-2012

e) Adviser Justice and Peace Committee St Peter Military Chaplaincy Janguza Barrack

Kano, Nigeria 2016- Till date

21 SEMINARS

i) Egbe-Ngu Ntui Ogork (2014): Effects of Groundnut Husk Ash (GHA) in Cement

Paste and Mortar. Ph.D Seminar presented in the Department of Civil Engineering,

Bayero University Kano, 9th April, 2014

ii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) on

Concrete Properties. Ph.D Seminar presented in the Department of Civil

Engineering, Bayero University Kano, 14th May, 2014

iii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) Admixed

with Rice Husk Ash (RHA) on Concrete in Normal and Aggressive Environments.

Ph.D Seminar presented in the Department of Civil Engineering, Bayero University

Kano, 24th July, 2014

22 CONFERENCE PROCEEDINGS

i) Rufai, I.A.; Uche, O.A.U. and Ogork, E.N. (2012): Biosilica from rice husk ash as

a new engineering raw material in Nigeria. The Nigeria Society of Engineer,

National Engineering Conference Exhibition and Annual General Meeting,

“HARMONY 2012”, pp. 1-20

ii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):

Multiple Regression Models for Strength Prediction of Groundnut Shell Ash

(GSA)-Rice Husk Ash (RHA) Concrete. Proceedings of the National Conference

on Bridging the Gap between Academia and Industry in Nigeria-Refocusing the

Engineering Discipline, Organized by Faculty of Engineering, Bayero University,

Kano, 9th – 11th November 2014, pp. 78-88

iii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015):

Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in

Cement Paste and Concrete. Proceedings of the International Conference on Key

Engineering Materials V, Singapore, 21st – 23rd March 2015. Published in

Advanced Materials Research, vol. 1119, pp. 662-671, (2015) Trans Tech

Publications, Switzerland, www.scientific.net

iv) Abubakar Mohammed and Egbe-Ngu Ntui Ogork (2015): Development of JAVA

Application Software for Design of Concrete Foundations. Book of Proceedings of

1st Annual International Conference on ‘Science and Technology: Tools for

Achieving National Development’, Faculty of Science, Northwest University,

Kano, Nigeria, 8th – 12th November, 2015, pp. 50-55, www. Nwusciaic.com

v) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Properties of Scrap Tyre

Steel Fibre Reinforced High Performance Concrete (STSFRHPC). Proceedings of

1st International Conference on Green Engineering for Sustainable Development

(IC-GESD2015), Faculty of Engineering, Bayero University, Kano, Nigeria, in

collaboration with the Faculty of Engineering, Tanta University, Egypt, 8th – 10th

December, 2015, pp. 49-53.

vi) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Effects of Rice Husk Ash on

the Properties of Scrap Tyre Steel Fibre Reinforced High Performance Concrete.

Proceedings of 1st International Conference on Green Engineering for Sustainable

Development (IC-GESD2015), Faculty of Engineering, Bayero University, Kano,

Nigeria, in collaboration with the Faculty of Engineering, Tanta University, Egypt,

8th – 10th December, 2015, pp. 66-70

vii) E.N. Ogork and A.M. Auwal (2016): Mechanical Properties of Self Compacting

Concrete (SCC) made with Corn Cob Ash (CCA). Book of Proceedings of the 15th

Annual International Conference/ Nigerian Materials Congress (NIMACON 2016),

Ahmadu Bello University, Zaria, Nigeria, 21st – 25th November, 2016, pp. 379-383

viii) Aboshio A., Uche O.A.U. and Ogork E.N. (2016): Reliability Based Calibration of

Safety Factors for Reinforced Concrete Staircase Designed to BS 8110 (1997).

Proceedings of 2nd National Engineering Conference on Bridging the Gap between

Academia and Industry in Nigeria-Refocusing the Engineering Discipline- 2,

Organized by Faculty of Engineering, Bayero University, Kano, Nigeria 6th – 8th

December 2016, pp. 14-18

ix) Egbe-Ngu N. Ogork and Daud G. Haruna (2016): Mechanical Properties of

Concrete made from Waste Metal Bottle Caps as Partial Replacement for Coarse

Aggregate. Proceedings of 2nd National Engineering Conference on Bridging the

Gap between Academia and Industry in Nigeria-Refocusing the Engineering

Discipline- 2, Organized by Faculty of Engineering, Bayero University, Kano,

Nigeria 6th – 8th December 2016, pp. 290-296

23 PEER REVIEWED JOURNAL ARTICLES

1) Ogork, E.N. and Rimi, M.K. (2007): ‘Kargo’ (Poliostigma thonningi) fruits powder

as admixture in concrete. Journal of Engineering and Technology, vol. 2, No. 1, pp.

9-15, Faculty of Technology, Bayero University, Kano, Nigeria.

2) Ogork, E.N. (2008): A modified septic/soak-away system with available local

materials as filters. Journal of Engineering and Technology, vol. 3, No. 1, pp. 113-

119, Faculty of Technology, Bayero University, Kano, Nigeria.

3) Ogork, E.N. and Ibu, T.A. (2009): Properties of powdered locust bean pod

(‘Makuba’) concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 32-

37, Faculty of Technology, Bayero University, Kano, Nigeria.

4) Gambo, A.H.; Ogork, E.N. and Aboshio, A. (2009): Wind-induced dynamic study

of communication masts in northern Nigeria. Journal of Engineering and

Technology, vol. 4, No. 2, pp. 67-78, Faculty of Technology, Bayero University,

Kano, Nigeria.

5) Aboshio, A.; Ogork, E.N. and Balami, D.A. (2009): Rice husk ash as admixture in

concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 97-103, Faculty

of Technology, Bayero University, Kano, Nigeria.

6) Ogork, E.N. and Koko, N.M.S. (2010): ‘Katsi’ (dye residue ash) as an admixture

in concrete. Journal of Engineering and Technology, vol. 5, No. 1, pp. 81-89,

Faculty of Technology, Bayero University, Kano, Nigeria.

7) Ogork, E.N.; Aboshio, A. and Balami, D.A. (2010): Durability assessment of

concrete made with rice husk ash as admixture. Journal of Engineering and

Technology, vol. 5, No. 1, pp. 90-98, Faculty of Technology, Bayero University,

Kano, Nigeria.

8) Ogork, E.N. and Wasiu, J. (2010): Reliability-based assessment of simply

supported hollow-pot slabs. Journal of Engineering and Technology, vol. 5, No. 2,

pp. 85-94, Faculty of Technology, Bayero University, Kano, Nigeria.

9) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):

A study on groundnut husk ash (GHA) -concrete under acid attack, International

Journal of Modern Engineering Research (IJMER), vol. 4, Iss. 7, July 2014, pp. 30-

35, www.ijmer.com

10) Ogork, E.N.; Uche, O.A.U. and Elinwa, A.U. (2014): Strength prediction models

of groundnut husk ash (GHA) concrete, American Journal of Civil and Structural

Engineering, vol. 1, no. 4, pp. 104-110, www.sciknow.org

11) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effect of particle size of

groundnut husk ash (GHA) in cement paste and mortar, International Journal on

Recent and Innovation Trends in Computing and Communication (IJRITCC), vol.

2, Iss. 9, September 2014, pp. 2764-2769, http://www.ijritcc.org

12) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effects of groundnut husk

ash (GHA) in cement paste and mortar, International Journal of Civil Engineering

and Technology (IJCIET), vol. 5, Iss. 10, October 2014, pp. 88-95,

www.iaeme.com/Ijciet.asp

13) Egbe-Ngu Ntui Ogork and Solomon Ayuba (2014): Influence of Sawdust Ash

(SDA) as Admixture in Cement Paste and Concrete. International Journal of

Innovative Science, Engineering & Technology, vol. 1, Iss. 10, December 2014,

pp. 736-743, www.ijiset.com

14) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):

Performance of groundnut husk ash (GHA) - Rice husk ash (RHA) modified

concrete in acidic environment, International Journal of Engineering Research and

Application (IJERA), vol. 4, Iss. 11, November 2014, pp. 71-77, www.ijera.com

15) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa 2015):

Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in

Cement Paste and Concrete. Advanced Materials Research, vol. 1119, pp. 662-671,

(2015) Trans Tech Publications, Switzerland, www.scientific.net

16) Mara Wazumtu and Egbe-Ngu Ntui Ogork (2015): Assessment of Groundnut Shell

Ash (GSA) as Admixture in Cement Paste and Concrete. International Journal of

Innovative Science, Engineering & Technology, vol. 2, Iss. 2, February 2015, pp.

77-86, www.ijiset.com

17) Olekwu Benjamin Elah, Gabriel Amode and Egbe-Ngu Ntui Ogork (2015):

Strength prediction models for Laterized Concrete Incorporating Used Engine Oil

as Admixture. American Journal of Civil and Structural Engineering, vol. 2, No. 2,

pp. 11-15, www.sciknow.org

18) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015):

Hydrochloric Acid Aggression in Groundnut Shell Ash (GSA)-Rice Husk Ash

(RHA) Modified Concrete. Scholars Journal of Engineering and Technology

(SJET), vol. 3, Iss. 2A, pp. 129-133, www.saspuplisher.com

19) Ogork, E.N. and Araga, A.O. (2015): Potentials of cassava peel powder (CPP) as

admixture in concrete. Bayero Journal of Engineering and Technology, vol. 10, No.

1, pp. 7-15, Faculty of Engineering, Bayero University, Kano, Nigeria,

www.bayerojet.com

20) Ogork, E.N. and Audu, V.E.M. (2015): Cocoa Pod Husk Ash (CPHA) Concrete in

Aggressive Environment. Bayero Journal of Engineering and Technology, vol. 10,

No. 1, pp. 35-43, Faculty of Engineering, Bayero University, Kano, Nigeria,

www.bayerojet.com

21) Egbe-Ngu Ntui Ogork and Suleiman Mohammed Laya (2015): Effect of Recycled

Concrete Aggregates on Concrete. Nigerian Journal of Engineering, vol. 22, No. 1,

pp. 26-35, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria

22) Egbe-Ngu Ntui Ogork and Godwin Omofonma (2015): Mechanical Properties of

High Strength Polypropylene Fibre Concrete. Nigerian Journal of Engineering, vol.

22, No. 1, pp. 64-71, Faculty of Engineering, Ahmadu Bello University, Zaria,

Nigeria

23) Ogork, Egbe-Ngu Ntui and Omofonma, Godwin (2016): Durability assessment of

polypropylene high strength concrete in marine environment. Bayero Journal of

Engineering and Technology, vol. 11, No. 1, pp. 40-48, Faculty of Engineering,

Bayero University, Kano, Nigeria, www.bayerojet.com

24) E.N. Ogork and Z M. Ango (2016): Reliability Assessment of a Timber Pinned

Jointed Footbridge Truss. Nigerian Journal of Engineering, vol. 23, No. 1, pp. 35-

43, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria

25) E.N. Ogork and A. K. Nakore (2016): Reliability Estimates of a Simply Supported

Timber Floor. Nigerian Journal of Engineering, vol. 22, No. 2, pp. 50-57, Faculty

of Engineering, Ahmadu Bello University, Zaria, Nigeria

26) E.N. Ogork and A K. Nakore (2017): Reliability Analysis of a Two Span Floor

Designed According to Eurocode 5. Nigerian Journal of Technology (NIJOTECH),

vol. 36, No. 1, pp. 18-25, Faculty of Engineering, University of Nigeria, Nsukka,

Nigeria

27) E. N. Ogork and T. S. Ibrahim (2017): Properties of Cement Paste and Concrete

Containing Calcium Carbide Waste as Additive. Nigerian Journal of Technology

(NIJOTECH), vol. 36, No. 1, pp. 26-31, Faculty of Engineering, University of

Nigeria, Nsukka, Nigeria

28) Ogork, E.N. and Suleiman, J.A. (2017): Assessment of the Effectiveness of Various

Curing Methods on the Quality of Concrete. Bayero Journal of Engineering and

Technology, vol. 12, No. 1, pp. 21-27, Faculty of Engineering, Bayero University,

Kano, Nigeria

29) Ogork, E.N. and Dayyabu, A. (2017): Safety Level Assessment of Expansion Joints

in Reinforced Concrete Slabs to Temperature Variations. Bayero Journal of

Engineering and Technology, vol. 12, No. 1, pp. 44-51, Faculty of Engineering,

Bayero University, Kano, Nigeria

30) Egbe-Ngu Ntui Ogork and Abdulkarim Muhammad Auwal (2017): Durability

Characteristics of Self-Compacting Concrete Incorporating Corn Cob Ash. CARD

International Journal of Engineering and Emerging Scientific Discovery (IJEESD),

vol. 2, No. 1, pp. 29-41, Centre for Advanced Research and Development, Rivers

State University of Science and Technology, Port Harcourt, Nigeria

31) Egbe-Ngu Ntui Ogork and Daud Gussau Haruna (2017): Durability of Waste Metal

Bottle Caps Aggregate Concrete. CARD International Journal of Engineering and

Emerging Scientific Discovery (IJEESD), vol. 2, No. 1, pp. 1-14, Centre for

Advanced Research and Development, Rivers State University of Science and

Technology, Port Harcourt, Nigeria

32) E. N. Ogork and T. S. Ibrahim (Accepted May 2017): Effects of Calcium Carbide

Waste (CCW) on the Durability of Concrete. Bayero Journal of Engineering and

Technology, Faculty of Engineering, Bayero University, Kano, Nigeria

33) E. N. Ogork and Y.N. Danja (Accepted May 2017): Evaluation of Properties of of

Cement and Concrete Containing Sorghum Chaff Ash. Bayero Journal of

Engineering and Technology, Faculty of Engineering, Bayero University, Kano,

Nigeria

24 REFEREES

1) Engr. Dr. M.O.A. Mtallib

Head, Department of Civil Engineering

Bayero University,

Kano, Nigeria

Tel: 08037019138

2) Engr. Prof. M.H. Bichi

Department of Civil Engineering

Bayero University,

Kano, Nigeria

Tel: 08036353001

3) Engr. G.A. Bichi

M.D. COBAG PRIME NIGERIA LTD

334 Aminu Kano Way, Kano, Nigeria

Tel: 064-641347