Ctp trade show p.p.final revision
-
Upload
kelly-morris -
Category
Business
-
view
110 -
download
1
Transcript of Ctp trade show p.p.final revision
RETROFIT ANCHORING
OFMASONRY AND STONE FACADES
Failure should NOT
happen
Prevent Disaster
Missing panel
It fell 17 stories…
IT’S THE OBVIOUS
THAT GETS ATTENTION
Applications for CTP Restoration Anchors
Brick Veneer Cavity Walls with:• Insufficient Ties• Corroded Ties• Concrete Back-Up• Metal Stud Back-Up• Wind Load Fortification
Applications for CTP Restoration Anchors
• Composite Walls where header brick have failed
• Soft Brick or Mortar• Deep Reaching Mulit-wythe
connections
Applications for CTP Restoration Anchors
Peripheral areas around bulges in walls or areas to
be removed
Applications for CTP Restoration Anchors
Non-Brick Facades such as:• Limestone• Granite • Precast
Stitch-Tie Grip –Tie Series
Façade-Tie Bracket
CTP Products For Restoration
• No Tension Stresses Between Connecting Wythes
Engineered Lead Angle (both Ends)
Axial Core:Provides In-Plane Ductile Strength and Bridging Stiffness for Hole Alignment
Drive Point (Either End)
Helical Pitch
• Load Distributed over the contact Area of Anchor
CTP Stitch-TieTM
Stitch-TieTM Product Application
Stitch-Tie Grip –Tie Series
Façade-Tie Bracket
CTP Products For Restoration
Stabilizing Grip
Torque 50-100 in-lbs.
Shaft:304 S.S
Mechanical Grip
• Manufactured with Corrosion Resistant Materials
CTP Grip-Tie
Stitch-Tie Grip –Tie Series
Façade-Tie Bracket
CTP ProductsFor Restoration
Bracket Attachment
In-Plane Movement
Out of Plane Restraint
X Positive Mechanical Anchorage in Brick
or Mortar Joint
No Exterior Veneer Hole
Corrosion resistant material
Installs from INTERIOR
Can ALSO use Helical Anchorage in Brick or Mortar Joint
CTP Façade-Tie Bracket
CTP Façade-Tie Bracket
Installs from INTERIOR
We also
specialize in
Masonry Ties
for Brick
Construction
CTP5801 Veneer Tie CTP-16
CTP ProductsFor Brick Construction
Performance
Seismic Reinforcement
½” In-Plane Movement
Safe Edges
Single Screw
1-1/2” Adjustability
No Mortar Bridging
CTP-16
CTP5801 Veneer Tie
CTP-16
CTP Products
3”, 4”, 5”, 6”,& 7” Ties
Stainless Steel or
Hot Dip Galvanized Assembly
CTP Masonry Fastener Positive Mechanical
Anchorage
Fits Narrow ½” cavity
Plate Adjusts Vertically 1 ¼”
up/down
CTP 5801 Veneer Tie
Other Accessories Available at CTP
CTP Insulation Retainer
Plate
CTP
MAD 2000
Stone Anchors
Stone Grip-Tie
Construction Tie Products, Inc.
is Proud to Be AN AMERICAN COMPANY