CSM SYSMAC-XR P102-E1 5 11 - Omron · 2019-07-23 · FB FB FB FB FB FB FB The Sysmac Library is a...

14
Omron's control expertise changes programming FB Sysmac Library SYSMAC-XR @@@

Transcript of CSM SYSMAC-XR P102-E1 5 11 - Omron · 2019-07-23 · FB FB FB FB FB FB FB The Sysmac Library is a...

Omron's control expertise changes programming

FB

Sysmac LibrarySYSMAC-XR@@@

FB

FB

FB

FB

FB

FB

FB FB

The Sysmac Library is a collection of software functional components that can be used in programs

for the NJ/NX Machine Automation Controllers or Industrial PC Platform NY IPC Machine Controller.

Packed with Omron’s rich technical know-how on control programs, the Sysmac Library makes

advanced control easy. Install the Sysmac Library to use it in the Sysmac Studio.

Omron offers Function Blocks for a wide range of applications: advanced control such as vibration suppression

and temperature control, motion control such as PID feedforward, and connection to servo drives or sensors.

Various software components help reduce

programming time

Components for various devices

2

Linear motors

FHVisionSystemDisplacement Sensor

N-Smart

Servo drives

Inverters

Delta robot

NXSafety Control UnitNX-I/O

NA Programmable Terminal

NJ/NX/NY Controller

SQL-Database

Note. For controllers and versions that can be used for the Sysmac Library, refer to the Version Information.

Temperature uniformity control Temperature gradient control

16014012010080604020 S17

S9

S1

1 4 7 1013

1619

2225

16014012010080604020

S17

S9

S1

14 7 10

1316

1922

25

Integration of the controller, EtherCAT, and Sysmac Library makes various motion control possible.

70605040302010

0-10-20-30

Actual torque+ range- range

Torque error

Vibration suppression

3

Reducing Work

Shortest Recovery

Advanced control

Vibration suppression during and after high-speed material handling prevents vibration, slides, and spilling, significantly reducing machine cycle time.

Temperature controlIn-furnace temperature variations can be reduced (temperature uniformity control), and the temperature can be distributed unevenly (temperature gradient control). A rapid increase in the temperature (rapid temperature increase) without overshoot-ing stabilizes quality and reduces cycle time.

Device operation monitoringYou can easily monitor devices such as air cylinders, sensors, and servo systems that often cause intermittent stoppages. Detecting deteriora-tion over time or errors of devices prevents machines from stopping suddenly in advance, improving operating efficiency. The status of devices before and after the occurrence of an error can be stored on an SD memory card. This allows you to identify the cause of the error.

Reduction of setup, changeover, and maintenance times Function Blocks facilitate the connection of devices to the controller and provide Backup and Restoration functions for quick setting change and recovery.

Reducing Work Various motion control

To production engineers

To production engineers

Productivity improvement

To maintenance engineers

(1)

(3)

(2)

SD memory card

SD memory card

(1) Store parameters on an SD memory card

(2) Replace the device

(3) Restore the parameters stored on the SD memory cardStores status before and after an error

Download

Omron websitesitee

oadDownlo

FB

Install the downloaded Function Blocks to the

Sysmac Studio

4

The Sysmac Library is freely available to download from Omron website.

These software components can be used for the NJ/NX/NY Controller without debugging.

Easy-to-obtain Library

http://www.ia.omron.com/sysmac_library/

Download from

OMRON technical offices across the World

Automation Center Technical office

Kusatsu(JPN),Shanghai(CHN),Barcelona(ESP),Hoffman Estates IL(USA),

Mumbai(IND),Jakarta(IDN),Bangkok(THA),Singapore(SGP),Seoul(KOR)

With our worldwide network for support, Omron will support you to meet your control requirements and solve your

problems by using the Sysmac Library.

We will provide technical support even after the shipment of your products using the Sysmac Library

High quality products with reliable global support

5

Sysmac Library

SYSMAC-XR@@@Sysmac Library for advanced controlThe Sysmac Library for the NJ/NX Machine Automation Controller or Industrial PC Platform NY IPC Machine Controller provides Function Blocks packed with know-how that makes advanced control easy.

Features• For a wide range of applications: advanced control such as vibration suppression and temperature control, motion control such as PID

feedforward, and connecting to servo drives or sensors.• Available to download from OMRON's website. Install the library to use in the Sysmac Studio.

Library specially designed for the NJ/NX Machine Automation Controller or Industrial PC Platform NY IPC Machine Controller reduces programming and debugging time.

• High quality product with reliable global support.

Sysmac Library

6

Ordering InformationSysmac LibrarySysmac Library is POU Libraries (Function Block and Function) provided for NJ/NX/NY-series Controller.Please download it from following URL and install to Sysmac Studio.

http://www.ia.omron.com/sysmac_library/

Product Features Model Standards

MC Test Run Library

The MC Test Run Library is used to perform a test run that the MC Function Module is used.In this library, a processing to operate axes that an MPG (i.e. a manual pulse generator) was used is provided.You can use this library to reduce manpower of programming when creating a test run program that an MPG was used.

SYSMAC-XR001

---

MC Command Table Library

The MC Command Table Library is used to continuously perform positioning that the MC Function Module is used. You can use this library together with motion control instructions of the NJ/NX/NY-series Controller.The program that multiple motion control instructions are used will be unnecessary by using this library.

SYSMAC-XR002

MC Tool Box Library

The MC Tool Box Library is used to implement a program to perform motor control in the user program.The processings such as PID processing and filter processing are provided in this library.You can use this library to reduce manpower of programming when creating a program to perform motor control.

SYSMAC-XR003

EtherCAT G5 Series Library

The EtherCAT G5 Series Library is used to initialize the absolute encoder, back up and restore the parameters for an OMRON G5-series Servo Drive with built-in EtherCAT communications.You can use this library to reduce manpower of programming when implementing the processing for a Servo Drive.

SYSMAC-XR004

EtherCAT N-Smart Series Library

The EtherCAT N-Smart Series Library is used to back up and restore the parameters for an OMRON E3NW Sensor Communications Unit (an EtherCAT type). You can use this library to reduce manpower of programming when implementing the processing for a Sensor Communications Unit.

SYSMAC-XR005

Vibration Suppression Library

The Vibration Suppression Library is used to suppress residual vibration caused by the operation of machines.You can use this library together with motion control instructions of the NJ/NX/NY-series Controller.

SYSMAC-XR006

Temperature Control Library

The Temperature Control Library is used to perform a high-level temperature control.You can use this library together with analog control instructions of the NJ/NX/NY-series Controller. SYSMAC-XR007

Device Operation Monitor Library

The Device Operation Monitor Library is used to monitor the operation of devices such as air cylinders, sensors, motors, and other devices. SYSMAC-XR008

Adept Robot Control Library

The Adept Robot Control Library is used to directly control Adept Robots from NJ/NX-series CPU Unit or NY-series Industrial PC.You can use this library to control any types of robots like parallel, SCARA and articulated from PLC with common instructions and a common programming method.

SYSMAC-XR009

Weighing Control Library

The Weighing Control Library is used to perform weighing control of raw materials for industrial products with NX-series Load Cell Input Unit NX-RS1201. Also, functions that are used to display and correct measurement values are included. You can use this Weighing Control Library to reduce programming work when you implement processing for weighing in each device.

SYSMAC-XR010

EtherCAT 1S Series Library

The EtherCAT 1S Series Library is used to back up and restore parameters, initialize the absolute encoder, clear the Motor Replacement Detected error, and execute the Unit Restart when an OMRON 1S-series Servo Drive with built-in EtherCAT communications is configured and replaced.This library also includes the function block that adjusts gains, helping configure and replace servo drives without using software.

SYSMAC-XR011

Packaging Machine Library

The Packaging Machine Library is used to control various packaging machines with NJ/NX-series CPU Unit or NY-series Industrial PC. The Packaging Machine Library enables accurate and high-speed packaging processing, and reduction of programming man-hour as well as man-hour to start up packaging system.The use of PackML-compliant PackML Support Function Blocks facilitates compliance with the PackML standard.

SYSMAC-XR012

Servo Press Library

The Servo Press Library is used to generate the operation commands and monitor the operations of actuator for servo presses with NJ/NX-series CPU Unit or NY-series Industrial PC. You can use the Servo Press Library to realize the high-speed and high precision servo press control and reduce programming work.

SYSMAC-XR013

Dimension Measurement Library

Dimension Measurement Library is the system which connects the NJ/NX-series CPU Unit or NY-series Industrial PC, ZW-8000/7000/5000 Confocal Fiber Displacement Sensor Controller, and E9NC-TA0 Contact-Type Smart Sensor through EtherCAT communications. It is used when you perform various dimension measurements. When you use the Dimension Measurement Library, you can improve measurement accuracy, enlarge measurement range, and reduce programming work.

SYSMAC-XR014

Safety System Monitor Library

The Safety System Monitor Library is used to monitor the safety system information.You can use this library to manage the information of the running safety system. SYSMAC-XR015

High-Speed Analog Inspection Library

The High-speed Analog Inspection Library records analog input values acquired by the NX-series High-speed Analog Input Units in time. This library provides functions required for product inspections during production processes, including calculation of feature values (e.g., maximum, minimum, and mean), comparison with master data, and data file storage.

SYSMAC-XR016

SLMP Communications Library

The SLMP Communications Library is a collection of functional objects that uses the SLMP communications protocol for the Sequencer made by Mitsubishi Electric to carry out communications control.Various FB types (Device Read, Device Write) are provided for easy incorporation of the OMRON Machine Automation Controller in networks configured by the Sequencer.

SYSMAC-XR017

Visual Feedback Alignment Library

The Visual Feedback Alignment Library is a set of software function components for alignment applications employing visual feedback. SYSMAC-XR018

RFID Communications Library

The RFID Communications Library is used to perform traceability management with NX-series V680 RFID unit.You can use this library to reduce programming work when implement processing for large data communication with RF tags, communication multiple RF tags.

SYSMAC-XR019

Sysmac Library

7

Automation SoftwarePlease purchase a DVD and licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually.The license does not include the DVD.

* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).

ProductSpecifications

Model StandardsNumber of licenses Media

Sysmac StudioStandard EditionVer.1.@@

The Sysmac Studio is the software that provides an integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX Series CPU Units, NY-series Industrial PC, EtherCAT Slave, and the HMI.

Sysmac Studio runs on the following OS.Windows 7 (32-bit/64- bit version) / Windows 8 (32-bit/64-bit version) / Windows 8.1 (32-bit/64-bit version)/ Windows 10 (32-bit/64-bit version)

The Sysmac Studio Standard Edition DVD includes Support Software to set up EtherNet/IP Units, DeviceNet slaves, Serial Communications Units, and Support Software for creating screens on HMIs (CX-Designer).Refer to your OMRON website for details.

---(Media only) DVD SYSMAC-SE200D ---

1 license * − SYSMAC-SE201L ---

Sysmac Library

8

Version Information

Sysmac Library Applicable Models

Product Name Model Version

Bundled library

File

NJ/NX-series CPU Unit NY-seriesIndustrial PC

Sysmac Studio Related Products

NX701-1@@@

NX102-@@@@

NJ501-@@@@

NJ301-@@@@

NJ101-@@@@

NX1P2-@@@@@@(1)

NY5@@-1

NY5@@-5

MC Test Run Library

SYSMAC-XR001 Ver.1.1

OmronLib_MC_TestRun_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later *1

Ver.1.13 or later *3

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• Incremental Encoder Input Unit (NX-EC@@@@, GX-EC0211/EC0241) Ver.1.1 or later

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

• NX-series Pulse Output Unit (NX-PG0@@@) Ver.1.1 or later

MC Command Table Library

SYSMAC-XR002 Ver.1.1

OmronLib_MC_CmdTbl_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later *1 *2

Ver.1.13 or later *3 *4

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

MC Tool Box Library

SYSMAC-XR003 Ver.1.1

OmronLib_MC_Toolbox_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher ---

EtherCAT G5 Series Library

SYSMAC-XR004 Ver.1.1

OmronLib_EC_G5_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.01 or later

Ver.1.01 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

• SD Memory Card (HMC-SD@@@)

EtherCAT N-Smart Series Library

SYSMAC-XR005 Ver.1.2

OmronLib_EC_E3NW_V1_2.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.01 or later

Ver.1.01 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• N-SmartSensor Communications Unit (E3NW-ECT) Ver.1.03 or later (The E3NX-CA0 is supported for Ver.1.06 or later.)Distributed Sensor Unit (E3NW-DS) Smart Fiber Amplifier Unit (E3NX-FA0)Color Fiber Amplifier Unit (E3NX-CA0)Smart Laser Amplifier Unit (E3NC-LA0)Smart Laser Amplifier Unit (CMOS type)(E3NC-SA0)Contact-Type Smart Amplifier Unit (E9NC-TA0)

• SD Memory Card (HMC-

Vibration Suppression Library

SYSMAC-XR006 Ver.1.0

OmronLib_VS_Toolbox_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later *1

Ver.1.13 or later *3

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher ---

Temperature Control Library

SYSMAC-XR007 Ver.1.0

OmronLib_TC_Toolbox_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.02 or later

Ver.1.02 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher ---

Device Operation Monitor Library

SYSMAC-XR008 Ver.1.0

OmronLib_BC_DeviceMonitor_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.01 or later

Ver.1.01 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

• N-SmartSensor Communications Unit (E3NW-ECT) Ver.1.03 or laterDistributed Sensor Unit (E3NW-DS) Smart Fiber Amplifier Unit (E3NX-FA0)Smart Laser Amplifier Unit (E3NC-LA0)Smart Laser Amplifier Unit (CMOS type)(E3NC-SA0)Contact-Type Smart Amplifier Unit (E9NC-TA0)

• SD Memory Card (HMC-SD@@@)

Sysmac Library

9

Adept Robot Control Library

SYSMAC-XR009 Ver.2.0

OmronLib_EIP_Adept_V2_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.01 or later

Ver.1.01 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.15 or higher

• SCARA RobotCobra 450/500/650eCobra 600/800 Ver.2.3.C or later

• Parallel RobotHornet 565 Ver.2.3.C or laterQuattro 650H/HS Ver.2.3.C or later, 800H Ver.2.3.C or later

• Articulated RobotViper 650/850 Ver.2.3.C or later

• SmartController EX Ver.2.3.C or later

• T20 Pendant Ver.2.2.2.1 or later

Weighing Control Library

SYSMAC-XR010 Ver.1.0

OmronLib_WC_Toolbox_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.05 or later

Ver.1.05 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.16 or higher

• NX-series LoadCell I/F Unit (NX-RS0@@@@) Ver.1.0 or later

EtherCAT 1S Series Library

SYSMAC-XR011 Ver.2.0

OmronLib_EC_1S_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.01 or later

Ver.1.01 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.16 or higher

• 1S-series Servo Drive (R88D-1SN@@@-ECT) Ver.1.0 or later(R88D-1SAN@-ECT) Ver.1.0 or later

• SD Memory Card (HMC-SD@@@)

Packaging Machine Library

SYSMAC-XR012 Ver.2.0

OmronLib_PKG_RK_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later *1

Ver.1.13 or later *3

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

• 1S-series Servo Drive (R88D-1SN@@@-ECT) Ver.1.0 or later

OmronLib_PKG_WU_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later *1

Ver.1.13 or later *3

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

OmronLib_PackML30_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.14 or higher

OmronLib_PackML30_V2_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

Servo Press Library

SYSMAC-XR013 Ver.2.0

OmronLib_ServoPress_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later *1

--- Ver.1.12 or later

Ver.1.18 or later

Ver.1.16 or higher

• G5-series Servo Drive (R88D-KN@@@-ECT) Ver.2.10 or later

• NX-series LoadCell I/F Unit (NX-RS0@@@@) Ver.1.0 or later

OmronLib_ServoPress_V2_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later *1

Ver.1.18 or later *3

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

Dimension Measurement Library

SYSMAC-XR014 Ver.2.0

OmronLib_DIM_Measurement_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.15 or higher*5 • N-Smart

Sensor Communications Unit (E3NW-ECT) Ver.1.03 or laterContact-Type Smart Amplifier Unit (E9NC-TA0)

• ZW-8000 Series Confocal Fiber Type Displacement Sensor Ver.3.00 or later

• ZW-7000 Series Confocal Fiber Type Displacement Sensor Ver.2.03 or later

• ZW-5000 Series Confocal Fiber Type Displacement Sensor Ver.2.10 or later

OmronLib_DIM_PointMeasurement_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.15 or higher *5

OmronLib_DIM_LineMeasurement_V1_1.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later *1

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.15 or higher *5

OmronLib_DIM_LineMeasurement_V2_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later *1

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

Sysmac Library Applicable Models

Product Name Model Version

Bundled library

File

NJ/NX-series CPU Unit NY-seriesIndustrial PC

Sysmac Studio Related Products

NX701-1@@@

NX102-@@@@

NJ501-@@@@

NJ301-@@@@

NJ101-@@@@

NX1P2-@@@@@@(1)

NY5@@-1

NY5@@-5

Sysmac Library

10

*1. This Library is not available for NJ101-90@@ CPU Units.*2. When you use this function block with NJ101-10@@, you can use a maximum of two real servo axes.*3. This Library is not available for NX1P2-90@@@@ CPU Units.*4. When you use this function block with NX1P2-10@@@@, you can use a maximum of two real servo axes.*5. When you use ZW-5000, Sysmac studio is supported for Ver.1.18 or higher.

When you use ZW-8000, Sysmac studio is supported for Ver.1.22 or higher.

Related Catalogs

Safety System Monitor Library

SYSMAC-XR015 Ver.1.0

OmronLib_SF_Monitor_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.07 or later

Ver.1.07 or later

Ver.1.10 or later --- Ver.1.12

or laterVer.1.18 or later

Ver.1.14 or higher

• NX-seriesSafety Control Unit (NX-SL3@@@) Ver.1.00 or later

• NX-seriesCommunications Coupler Unit (NX-ECC201) Ver.1.2.1 or laterCommunications Coupler Unit (NX-ECC202) Ver.1.2.1 or laterCommunications Coupler Unit (NX-ECC203) Ver.1.3 or later

High-Speed Analog Inspection Library

SYSMAC-XR016 Ver.1.0

OmronLib_NX_HAD_V1_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

• NX-series High-speed Analog Input Unit (NX-HAD@@@) Ver.1.0 or later

OmronLib_DataRecorder_V1_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

SLMP Communications Library

SYSMAC-XR017 Ver.1.0

OmronLib_SLMP_Comm_V1_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher ---

Visual Feedback Alignment Library

SYSMAC-XR018 Ver.1.0

OmronLib_VF_Alignment_V1_0.slr

Ver.1.10 or later

Ver.1.30 or later

Ver.1.08 or later

Ver.1.08 or later

Ver.1.10 or later *1 *2

Ver.1.13 or later

Ver.1.12 or later

Ver.1.18 or later

Ver.1.18 or higher

• Vision System FH-series (FH-@@@@) Ver.5.50 or later

RFID Communications Library

SYSMAC-XR019 Ver.1.0

OmronLib_NX_V680_V1_0.slr

Ver.1.18 or later

Ver.1.30 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.18 or later

Ver.1.23 or higher

• NX-series RFID Unit (NX-V680C@) Ver.1.0 or later

Product Name Models Cat. No.

MC Test Run Library SYSMAC-XR001 P093

MC Command Table Library SYSMAC-XR002 P092

MC Tool Box Library SYSMAC-XR003 P098

EtherCAT G5 Series Library SYSMAC-XR004 P095

EtherCAT N-Smart Series Library SYSMAC-XR005 P094

Vibration Suppression Library SYSMAC-XR006 P099

Temperature Control Library SYSMAC-XR007 P100

Device Operation Monitor Library SYSMAC-XR008 P101

Adept Robot Control Library SYSMAC-XR009 P106

Weighing Control Library SYSMAC-XR010 P109

EtherCAT 1S Series Library SYSMAC-XR011 P110

Packaging Machine Library SYSMAC-XR012 P111

Servo Press Library SYSMAC-XR013 P112

Dimension Measurement Library SYSMAC-XR014 P113

Safety System Monitor Library SYSMAC-XR015 P119

High-Speed Analog Inspection Library SYSMAC-XR016 P132

SLMP Communications Library SYSMAC-XR017 P131

Visual Feedback Alignment Library SYSMAC-XR018 P135

RFID Communications Library SYSMAC-XR019 P136

Sysmac Library Applicable Models

Product Name Model Version

Bundled library

File

NJ/NX-series CPU Unit NY-seriesIndustrial PC

Sysmac Studio Related Products

NX701-1@@@

NX102-@@@@

NJ501-@@@@

NJ301-@@@@

NJ101-@@@@

NX1P2-@@@@@@(1)

NY5@@-1

NY5@@-5

Sysmac Library

11

Related ManualsThe followings are the manuals related to this product. Use these manuals for reference.

Cat. No. Model number Manual Application Description

W546 SYSMAC-XR001Sysmac Library User’s Manual for MC Test Run Library

Learning about the specifications of the function blocks in the MC Test Run Library

Describes the information that is necessary to use the function blocks in the MC Test Run Library.

W545 SYSMAC-XR002Sysmac Library User’s Manual for MC Command Table Library

Learning about the specifications of the function blocks in the MC Command Table Library

Describes the information that is necessary to use the function blocks in the MC Command Table Library.

W547 SYSMAC-XR003Sysmac Library User’s Manual for MC Tool Box Library

Learning about the specifications of the function blocks in the MC Tool Box Library

Describes the information that is necessary to use the function blocks in the MC Tool Box Library.

W548 SYSMAC-XR004Sysmac Library User’s Manual for EtherCAT G5 Series Library

Learning about the specifications of the function blocks in the EtherCAT G5 Series Library

Describes the information that is necessary to use the function blocks in the EtherCAT G5 series Library.

W549 SYSMAC-XR005Sysmac Library User’s Manual for EtherCAT N-Smart Series Library

Learning about the specifications of the function blocks in the EtherCAT N-Smart Series Library

Describes the information that is necessary to use the function blocks in the EtherCAT N-Smart series Library.

W550 SYSMAC-XR006Sysmac Library User’s Manual for Vibration Suppression Library

Learning about the specifications of the function blocks in the Vibration Suppression Library

Describes the information that is necessary to use the function blocks in the Vibration Suppression Library.

W551 SYSMAC-XR007Sysmac Library User’s Manual for Temperature Control Library

Learning about the specifications of the function blocks in the Temperature Control Library

Describes the information that is necessary to use the function blocks in the Temperature Control Library.

W552 SYSMAC-XR008Sysmac Library User’s Manual for Device Operation Monitor Library

Learning about the specifications of the function blocks in the Device Operation Monitor Library

Describes the information that is necessary to use the function blocks in the Device Operation Monitoring Library.

W575 SYSMAC-XR009

NJ/NX-series Sysmac Library User’s Manual for Adept Robot Control Library

Learning about the specifications of the function blocks in the Adept Robot Control Library

Describes the information that is necessary to use the function blocks in the Adept Robot Control Library

W569 SYSMAC-XR010Sysmac Library User’s Manual for Weighing Control Library

Learning about the specifications of the function blocks in the Weighing Control Library

Describes the information that is necessary to use the function blocks in the Weighing Control Library.

W571 SYSMAC-XR011Sysmac Library User’s Manual for EtherCAT 1S Series Library

Learning about the specifications of the function blocks in the EtherCAT 1S Series Library

Describes the information that is necessary to use the function blocks in the EtherCAT 1S series Library.

W572 SYSMAC-XR012Sysmac Library User’s Manual for Packaging Machine Library

Learning about the specifications of the function blocks in the Packaging Machine Library

Describes the information that is necessary to use the function blocks in the Packaging Machine Library.

W573 SYSMAC-XR013Sysmac Library User’s Manual for Servo Press Library

Learning about the specifications of the function blocks in the Servo Press Library

Describes the information that is necessary to use the function blocks in the Servo Press Library.

W574 SYSMAC-XR014Sysmac Library User's Manual for Dimension Measurement Library

Learning about the specifications of instructions for the function blocks in the Dimension Measurement Library

Describes the information that is necessary to use the function blocks in the Dimension Measurement Library.

W582 SYSMAC-XR015Sysmac Library User’s Manual for Safety System Monitor Library

Learning about the specifications of the function blocks in the Safety System Monitor Library

Describes the information that is necessary to use the function blocks in the Safety System Monitor Library.

W607 SYSMAC-XR016Sysmac Library User's Manual for High-Speed Analog Inspection Library

Learning about the specifications of instructions for the function blocks in the High-Speed Analog Inspection Library

Describes the information that is necessary to use the function blocks in the High-Speed Analog Inspection Library.

W597 SYSMAC-XR017Sysmac Library User's Manual for SLMP Communications Library

Learning about the specifications of instructions for the function blocks in the SLMP Communications Library

Describes the information that is necessary to use the function blocks in the SLMP Communications Library.

W608 SYSMAC-XR018

Sysmac Library User's Manual for Visual Feedback Alignment Library

Learning about the specifications of instructions for the function blocks in the Visual Feedback Alignment Library

Describes the information that is necessary to use the function blocks in the Visual Feedback Alignment Library.

W608 SYSMAC-XR019Sysmac Library User's Manual for RFID Communications Library

Learning about the specifications of instructions for the function blocks in the RFID Communications Library

Describes the information that is necessary to use the function blocks in the RFID Communications Library.

W501

NX701-1@@@NX102-1@@@NX102-90@@NX1P2-1@@@@@NX1P2-90@@@@NJ501-@@@@NJ301-1@@@NJ101-10@@NJ101-90@@

NJ/NX-series CPU Unit Software User’s Manual

Learning how to program and set up an NJ/NX-series CPU Unit. Mainly software information is provided.

The following information is provided on a Controller built with an NJ/NX-series CPU Unit.• CPU Unit operation• CPU Unit features• Initial settings• Programming language specifications and programming with

the IEC 61131-3 standard. Use this manual together with the NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500).

Sysmac Library

12

W502

NX701-1@@@NX102-1@@@NX102-90@@NX1P2-1@@@@@NX1P2-90@@@@NJ501-@@@@NJ301-1@@@NJ101-10@@NJ101-90@@

NJ/NX-series Instructions Reference Manual

Learning about the specifications of the instruction set that is provided by OMRON

The instructions in the instruction set (IEC 61131-3 specifications) are described.Use this manual together with the NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500) and NJ/NX-series CPU Unit Software User’s Manual (Cat. No. W501).

W504 SYSMAC-SE2@@@@

Sysmac Studio Version 1 Operation Manual

Learning about the operating procedures and functions of the Sysmac Studio.

Describes the operating procedures of the Sysmac Studio.

W507

NX701-1@@@NX102-1@@@NX102-90@@NX1P2-1@@@@@NX1P2-90@@@@NJ501-@@@@NJ301-1@@@NJ101-10@@

NJ/NX-series CPU Unit Motion Control User’s Manual

Learning about motion control settings and programming concepts

The settings and operation of the CPU Unit and programming concepts for motion control are described.Use this manual together with the NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500) and NJ/NX-series CPU Unit Software User’s Manual (Cat. No. W501).

W508

NX701-1@@@NX102-1@@@NX102-90@@NX1P2-1@@@@@NX1P2-90@@@@NJ501-@@@@NJ301-1@@@NJ101-10@@

NJ/NX-series Motion Control Instructions Reference Manual

Learning about the specifications of the motion control instructions that are provided by OMRON

The motion control instructions are described.Use this manual together with the NJ-series CPU Unit Hardware User’s Manual (Cat. No. W500), NJ/NX-series CPU Unit Software User’s Manual (Cat. No. W501) and NJ/NX-series CPU Unit Motion Control User’s Manual (Cat. No.W507).

W558

NY532-1500NY532-1400NY532-1300NY532-5400NY512-1500NY512-1400NY512-1300

NY-seriesIPC Machine ControllerIndustrial Panel PC / Industrial Box PCSoftware User's Manual

Learning how to program and set up the Controller functions of an NY-series Industrial PC.

The following information is provided on NY-series Machine Automation Control Software.• Controller operation• Controller features• Controller settings• Programming based on IEC 61131-3 language

specifications

W560

NY532-1500NY532-1400NY532-1300NY532-5400NY512-1500NY512-1400NY512-1300

NY-series Instructions Reference Manual

Learning detailed specifications on the basic instructions of an NY-series Industrial PC.

The instructions in the instruction set (IEC 61131-3 specifications) are described.

W559

NY532-1500NY532-1400NY532-1300NY532-5400NY512-1500NY512-1400NY512-1300

NY-seriesIPC Machine ControllerIndustrial Panel PC / Industrial Box PCMotion Control User's Manual

Learning about motion control settings and programming concepts of an NY-series Industrial PC.

The settings and operation of the Controller and programming concepts for motion control are described.

W561

NY532-1500NY532-1400NY532-1300NY532-5400NY512-1500NY512-1400NY512-1300

NY-seriesMotion Control Instructions Reference Manual

Learning about the specifications of the motion control instructions of an NY-series Industrial PC.

The motion control instructions are described.

I586 R88M-1@R88D-1SN@-ECT

AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT Communications User’s Manual

Learning how to use theServomotors/Servo Driveswith built-in EtherCAT Communications.

Describes the hardware, setup methods and functionsof the Servomotors/Servo Drives with built-inEtherCAT Communications.

I576 R88M-K@R88D-KN@-ECT

G5-series AC Servomotors/Servo Drives (Built-in EtherCAT Communications) User's Manual

Learning how to use the AC Servomotors/Servo Drives with built-in EtherCAT Communications.

Describes the hardware, setup methods and functions of the AC Servomotors/Servo Drives with built-in EtherCAT Communications.

E429 E3NW-ECT

E3NW-ECT EtherCAT Digital Sensor Communication Unit Operation Manual

Learning how to use E3NW-ECT EtherCAT Digital Sensor Communication Unit

Provides the specifications of and describes application methods for E3NW-ECT EtherCAT Digital Sensor Communication Unit.

Z362 ZW-8000@/7000@/5000@

Confocal Fiber Type Displacement Sensor ZW-8000/7000/5000 series User's Manual

To learn how to set-up of Confocal Fiber Type Displacement Sensor of ZW-8000/7000/5000 series

Describes how to set-up of Confocal Fiber Type Displacement Sensor of ZW-8000/7000/5000 series.

Z930NX-SL@@@@NX-SI@@@@NX-SO@@@@

NX-series Safety Control Unit User's Manual

Learning how to use the NX-series Safety Control Units.

Describes the hardware, setup methods, and functions of the NX-series Safety Control Units.

Cat. No. Model number Manual Application Description

Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products.Windows is a registered trademark of Microsoft Corporation in the United States and other countries.EtherCAT® is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.EtherNet/IP™ is a trademark of the ODVA.The SD logo is a trademark of SD-3C, LLC.Other company names and product names in this document are the trademarks or registered trademarks of their respective companies.

Authorized Distributor:

In the interest of product improvement, specifications are subject to change without notice.

Cat. No. P102-E1-12 0619(1115)

© OMRON Corporation 2015-2019 All Rights Reserved.

OMRON Corporation Industrial Automation Company

OMRON ELECTRONICS LLC2895 Greenspoint Parkway, Suite 200 Hoffman Estates, IL 60169 U.S.A.Tel: (1) 847-843-7900/Fax: (1) 847-843-7787

Regional HeadquartersOMRON EUROPE B.V.Wegalaan 67-69, 2132 JD HoofddorpThe NetherlandsTel: (31)2356-81-300/Fax: (31)2356-81-388

Contact: www.ia.omron.comKyoto, JAPAN

OMRON ASIA PACIFIC PTE. LTD.No. 438A Alexandra Road # 05-05/08 (Lobby 2), Alexandra Technopark, Singapore 119967Tel: (65) 6835-3011/Fax: (65) 6835-2711

OMRON (CHINA) CO., LTD.Room 2211, Bank of China Tower, 200 Yin Cheng Zhong Road, PuDong New Area, Shanghai, 200120, ChinaTel: (86) 21-5037-2222/Fax: (86) 21-5037-2200

Note: Do not use this document to operate the Unit.

CSM_5_11_0619