CSC 2405: Computer Systems II
description
Transcript of CSC 2405: Computer Systems II
1
CSC 2405: Computer Systems II
Spring 2012Dr. Tom Way
2
Facilities for Programming
• Unix cluster– Machines: csgate, tanner, degas, cezanne,
picasso,rodin, cassatt, gauguin, matisse– List displayed when logging into csgate
• Linux machines– felix, helix
• Logging in to the machines remotely– SSH available for download from the CSC website
3
Key to Success• Start early to allow time for debugging.
4
Policies: Write your own codeProgramming in an individual creative process much like
composition. You must reach your own understanding of the problem and discover a path to its solution. During this time, discussions with friends are encouraged. However, when the time comes to write code that solves the problem, such discussions are no longer appropriate
– The program must be your own work –
5Villanova University
Memory Hierarchy
Cache PrincipleThe more frequently data is accessed, the faster the
access should be.
6Villanova University
Central Processing Unit (CPU)• Runs the loop
Fetch-Decode-Execute
Fetch NextInstructionSTART Execute
Instruction
ExecuteInstruction
ExecuteInstruction
HALT
Fetch Cycle Execute Cycle
DecodeInstructionSTART
Decode Cycle
Fetch the next instruction from memory Decode the instruction to figure out what to do Execute the instruction and store the result
7Villanova University
Fetch-Decode-Execute• Where is the “next instruction” held in the machine?
– a CPU register called the Program Counter (PC) holds the address of the instruction to be fetched next
• Fetch cycle– Copy instruction from memory into Instruction Register (IR)
• Decode cycle– Decode instruction and fetch operands, if necessary
• Execute cycle– Execute the instruction– Increment PC by the instruction length after execution
(assuming that all instructions are the same length)
8Villanova University
Device Controller• Special-purpose processor• In charge of a particular
device type• Has registers
(data, control, status)• Has local buffer storage
• I/O is from the device to local buffer of controller• CPU moves data from/to memory to/from local
buffer• I/O devices and CPU can execute concurrently
9Villanova University
I/O Operation Example
CPU
Keyboard Controller
Keyboardc = getchar();
10Villanova University
Input / Output (I/O)
• To start an I/O operation, the CPU tells the controller:– The chunk size be transferred (eg, one character)– Goes off to do something else
• The device controller:– Checks registers to determine what to do (read, write)– Transfers data to/from device from/to local buffer– Informs the CPU when transfer is complete (HOW?)
11Villanova University
• Hardware may trigger interrupts at any time by sending a signal to the CPU by way of system bus
• When the CPU is interrupted– Stops what it is doing– Transfers control to a fixed memory location (Interrupt
Vector)
Hardware Interrupts
12Villanova University
• A table of pointers (addresses) at a fixed memory location
• Contains addresses of interrupt service routines• Indexed by a
unique devicenumber– Given with the
interrupt request
Interrupt Vector
Interruptvector
0
OS code for disk interrupt
OS code for divide by zero trap
12...
13Villanova University
Interrupt Handling• The interrupt architecture
– Must save the Program Counter (PC) prior to transferring control to the interrupt service routine (interrupt handler)
– Restore PC upon returning from interrupt
• Interrupt handler– Save registers that are to be modified onto the stack– Service request (eg, copy data from local buffer in memory)– Mark the process blocked on I/O as ready to run– Restore registers from the stack
• Interrupted computation resumes as the point it left off.
14Villanova University
When does the CPU Check for Interrupts?
Fetch NextInstructionSTART Execute
Instruction
ExecuteInstruction
ExecuteInstruction
HALT
Fetch Cycle Execute Cycle
DecodeInstructionSTART
Decode Cycle
???
15Villanova University
• Interrupts must be handled quickly
• Interrupts are a critical part of a computer system– They allow a program to be interrupted, so the computer may
deal with an urgent event• All modern computer systems are interrupt-driven
CPU Cycle with Interrupts
STARTSTART ExecuteExecuteInstruction
Check forInterrupt:
Process Interrupt
Check forInterrupt:
Process Interrupt
Fetch Cycle Decode Cycle Execute Cycle Interrupt Check
Interrupts disabled
InterruptsEnabled
FetchInstruction
DecodeInstruction
STARTHALT
16Villanova University
Direct Memory Access I/O• To start an I/O operation, the CPU tells the DMA controller:
– The chunk size to be transferred (eg, 4096 bytes of data)– The memory address where the chunk ought to be stored
• The DMA controller– Accesses the device via its controller– Transfers the chunk from/to device to/from system MEMORY– Interrupts CPU when transfer is complete
• Benefits– The CPU is only involved at the start and end of transfer– Interrupts are now less frequent – Hence, CPU can do a lot of work between interrupts
17Villanova University
count = read(fd,buffer,nbytes);DMA Example
CPU Disk Controller
Disk driveMemory
18Villanova University
Where Does the OS Fit?
Operating System
System CallsUsers and User Programs
WebBrowser
MusicPlayer
InterruptsDevice Control
19Villanova University
• Software may trigger interrupts by system calls or illegal operations (such as invalid memory access, divide by zero)
Software Interrupts
Hardware
Operating System
Users and User ProgramsSystem Calls
20Villanova University
System Call Example (1)• What happens when a user executes a system call such as read?
In Unix, for instance:count = read(fd,buffer,nbytes)
which reads up to nbytes from the file described by fd into buffer. The actual number of bytes read is returned
• Steps:1. Push third parameter on to the stack. 2. Push second parameter on to the stack. 3. Push first parameter on to the stack. 4. Call the library routine, which involves pushing the return address on
to the stack and jumping to the routine.
21Villanova University
System Call Example (2)
22Villanova University
System Call Example (3)
5. Machine/OS dependent actions. One is to put the system call number for read in a well defined place, e.g., a specific register. This requires assembly language.
6. Trap to the kernel (assembly language). This enters the operating system properly and shifts the computer to privileged mode.
7. The envelope uses the system call number to access a table of pointers to find the handler for this system call.
8. The read system call handler processes the request (see below).
23Villanova University
System Call Example (4)
9. Some magic instruction returns to user mode and jumps to the location right after the trap.
10.The library routine returns (count is also returned).
11.The stack is popped (ending the function call read).
24Villanova University
The Operating SystemResource Principle
An Operating Systems is a set of algorithms that allocates resources to processes.
Beautification PrincipleAn Operating Systems is a set of algorithms that hide the
details of the hardware and provide a more pleasant environment
25Villanova University
DMA ExerciseSuppose that a user program requests the following
data transfer:
Read 4096 bytes of data from file “test”
into array “mybuffer”
Describe in detail all steps involved:OS activitiesDMA controller activitiesCPU activities
26Villanova University
Summary
• Main computer system components:– CPU, Memory, I/O Devices
• Fetch-Decode-Execute-InterruptCheck cycle• I/O device controllers
– Special processors– Use local buffers for I/O transfer
• Software interrupts (system calls, traps) vs. hardware interrupts
• Interrupt handling steps • Interrupt-Driven I/O with DMA