CSB502IoT Raspberry Pi 2 Shield · manufactured by PI 2 Embedded (a division of PI 2 Design), is a...
2
Specifications and Features The CSB502IOT, designed and manufactured by PI 2 Embedded (a division of PI 2 Design), is a professional I/O Shield designed for the low cost Raspberry PI 2 (RPi 2) computer. This shield provides access to virtually any sensor technology available through the multiple Grove and PMOD I/O expansion connectors. Using the high performance Raspberry Pi 2 with Quad Core Cortex-A7 CPU, the CSB502IOT creates a low cost, sensor hub, data collection, storage and gateway device. This powerful combination enables you to deliver on the promise of the “Internet of Things” for real world projects. Introduction and Overview TOP VIEW BOTTOM VIEW CSB502IoT Raspberry Pi 2 Shield www.Pi2Design.com FORM FACTOR – Full Size RPi 2 I/O Shield with 40-Pin stacking or non-stacking connector. BATTERY-BACKED RTC – DS1339 with 16mm coin cell. 10/100 ETHERNET – LAN9514 Combo 10/100 and USB Hub provides an additional Ethernet port for gateway and bridging applications. DUAL USB PORTS – USB2.0 Type A for additional USB expansion. High-Retention sockets provide 2.1A peak (1.5A continuous) for high power peripherals. SSD – PL2571 Controller and M.2 (Next Generation Form Factor) Socket for up to 256GB on-board Storage. WiFi – GWF-3M08 Module (Ralink RT5370) provides 802.11b/g/n for up to 150Mbps. On-Module IPEX connector allows for optimal antenna placement. 50W POWER SUPPLY – Wide-Input 5V @ 10A power supply powers all peripherals as well as the RPi 2. GROVE I/O CONNECTORS – 4 x Analog (via 8-Channel, 10-bit @124Khz ADC), 4 x Digital, 4 x I2C and 1 x UART Grove connectors PMOD I/O CONNECTORS – 2 x SPI and 1 x I2C PMOD Connectors. AUDIO LINE OUT – 24-Bit, 48Khz - 384Khz Audio Out using PCM5102A DAC via RPI 2 I2S Bus.
Transcript of CSB502IoT Raspberry Pi 2 Shield · manufactured by PI 2 Embedded (a division of PI 2 Design), is a...
Specifications and Features
The CSB502IOT, designed and manufactured by PI 2 Embedded (a division of PI 2 Design), is a professional I/O Shield designed for the low cost Raspberry PI 2 (RPi 2) computer. This shield provides access to virtually any sensor technologyavailable through the multipleGrove and PMOD I/O expansion connectors.
Using the high performance Raspberry Pi 2 with Quad Core Cortex-A7 CPU, theCSB502IOT creates a low cost, sensor hub, datacollection, storage and gateway device. This powerful combination enables you to deliver on the promise of the “Internet of Things” for real world projects.
Introduction and OverviewTOP VIEW
BOTTOM VIEW
CSB502IoT Raspberry Pi 2 Shield
www.Pi2Design.com
FORM FACTOR – Full Size RPi 2 I/O Shield with 40-Pin
stacking or non-stacking connector.
BATTERY-BACKED RTC – DS1339 with 16mm coin cell.
10/100 ETHERNET – LAN9514 Combo 10/100 and USB
Hub provides an additional Ethernet port for gateway and bridging applications.
DUAL USB PORTS – USB2.0 Type A for additional USB expansion. High-Retention sockets provide 2.1A peak
(1.5A continuous) for high power peripherals.
SSD – PL2571 Controller and M.2 (Next Generation Form
Factor) Socket for up to 256GB on-board Storage.
WiFi – GWF-3M08 Module (Ralink RT5370) provides
802.11b/g/n for up to 150Mbps. On-Module IPEX
connector allows for optimal antenna placement.
50W POWER SUPPLY – Wide-Input 5V @ 10A power
supply powers all peripherals as well as the RPi 2.
GROVE I/O CONNECTORS – 4 x Analog (via 8-Channel,
10-bit @124Khz ADC), 4 x Digital, 4 x I2C and 1 x UART Grove connectors
PMOD I/O CONNECTORS – 2 x SPI and 1 x I2C PMOD
Connectors.
AUDIO LINE OUT – 24-Bit, 48Khz - 384Khz Audio Out
using PCM5102A DAC via RPI 2 I2S Bus.
40
-Pin
Ex
pa
nsi
on
He
ad
er
CSB502IOT BLOCK DIAGRAM
LAN9514 USB
HUB w/ 10/100
USB-A
HOST
High-Retention
DUAL USB-A
PL2571 SATA
Controller
IPEX (U.FL)
Antenna Jack
PCM5102A
I2S Stereo DAC
3.5MM Stereo
Jack
Left/Right Line Out
12-Pin PMOD
Socket
12-Pin PMOD
Socket
*CS0
*CS1
PCA9518 5-Port
I2C Hub
8-Pin PMOD
I2C Header
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
MAX11603
10-Bit A/D
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
PCA9554
8-Bit GPIO
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
4-Pin Grove
Header
Ex
ten
de
d H
eig
ht
40
-Pin
So
cke
t
Bi-Color
Status LED
USB-A
HOST
USB-A
HOST
USB-A
HOST
10/100 RJ45
w/Transformer
Grove I2C
Grove Analog
Grove Digital
Grove UART
2.5MM
DC Jack
12V @ 5A
Power Brick
10/100 COPPER
SPI
I2C
UPSTREAM PORT
HOST PORT 2
HOST PORT 3
HOST PORT 4
HOST PORT 5
Backpower
Protection
Circuit
UART
+5V
+8V to +24V Input
5V @ 10A
Switching Supply
3V @ 3A Switching
Supply
10/100 RJ45
w/Transformer
TOP
BOTTOM
USB
MICRO-B
USB Port
SATA PortOGEMRAY
GWF-3M08
802.11b/g/n
M.2 (NGFF) 2242
4mm Socket
32GB to 256GB
I2S I2S I/F
HW Control
Analog OutGPIO
I2C EXP 0
I2C 0
I2C 1
I2C EXP 1
I2C 2
I2C 3
I2C 4
I2C I/F
Channel 2-3
Channel 4-5
Channel 0-1
Channel 6-7
I2C I/F
Channel 2-3
Channel 4-5
Channel 0-1
Channel 6-7
ID I2C
GPIO
24AA32T
EEPROM
USB-A to
Micro USB-B
Patch Cable
Raspberry Pi 2
HDMI
DS1339U
Real-Time Clock
© 2016 Pi 2 Design, All rights reserved. Subject to change without notice. All trademarks are property of the respective owners.
