CS1000專業完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

Professional

CS1000

We, Tronco, accumulated over 10 years experiences for development, manufacture as well as production in Automatic Sliding Door System for

CS1000 series. Based on the demand of consumers, we research and develop for new potential products ourselves which passed through

multinational safety standards and have been sold to European and American regions for many years. The motion of door leaves for Tronco

CS1000 series is set up by microprocessor controller and support the security system. The controller has multiple emergency set-up to ensure

the users' safety. CS1000 series adopted DC Brushless Motor with accurate opening and closing action, environmental protection, low noise,

electricity saving and durable rotation rate 1,000,000 times. The low consumption motive power supply system make door wings with elegant

and smooth movement.

All components for Tronco CS1000 series are modular. It makes the installation and overhauling more convenient. In addition, one more

function, LED display, is for your visual inspection when there is a breakdown. Tronco's CS1000 series is applied to doors for garage, usage of

anti-radiation for hospital, warehouse, science and technology factory, barrier-free space, fire prevention, emergency doors, commercial

buildings, salesrooms, craft and has produced widespread favorable comment.

Apply to doors for garage, usage of anti-radiation for hospital, warehouse, science and technology factory, barrier-free space, fire

prevention, commercial buildings, Shopping malls, craft.... etc.

To connect with Safety and Security System.

High performance, sound-dampening, professional solutions for automatic door systems.

Easy installation & easy maintenance.

Automatic Sliding Door System

Electrical & Kinetic Energy

Intimate design for power supply system

CS 1000 series adopted high efficiency

changeable power supply unit which can

input universal voltage 85VAC ~ 265 VAC

and provide extra power source

12VDC/1.5A and 24 VDC/1.5A to satisfy

surrounding electrical requirements of

other electrical appliances and not need to

purchase extra power supply to save cost

and space.

High efficiency circuit design for

electricity saving

It includes RFC design and power rate to

tend towards to perfect 100% so as to

make utilization rate the optimum and the

consumed power of this system is only

25W. This device can operate smoothly

only requiring power supply that is equal to

a energy saving light Bulb or fluorescent

tube.

Safety power supply system for

emergencies

The CS1000 series support UPS and can

connect with rechargeable batteries or

normal batteries. The rechargeable

function is able to turn off as you installed

normal batteries. The controller can

response the volume of power for

emergency. It is also available to set up the

status of door leaves in advance as power

of emergency is going to use up. All up to

your decisions.

A. Regular opening

B. Regular closing

C. Manual opening

D. Regular closing and lock up

The rhythm of opening and closing for

door leaves follow your inclination.

Whatever in commercial buildings or

salesroom, the motion of door leaves

influence the viewpoint of guests and

visitors directly. Tronco always keep an eye

on the most smallest requirements for the

CS1000 series to have you to set up the

motion of door leaves leisurely and

carefree.

To remind the operation status of

equipment

Tronco CS1000 series included monitor

display to make users understanding the

existing operation status easily and below 6

points can be revealed.

A. R.P.M. for Motor at present

B. Position display for door leaves

C. R.P.M. for Motor

D. Speed of Opening and Closing for each

second

E. Power display for batteries in reserve

F. Position display for Opening

Whatever inspection, maintenance,

installation and to save strength easily are

through monitor display to decrease wrong

judgement.

To set up functions in humanistic

opinions

If the set-up for multiple functions of Tronco

CS1000 series is time-consuming ? Or only

need the crossed keystroke on panel of

controller to complete the set-up of

functions. Buttons have sound assistance

and make operators to use more easily.

Simple and easy Menu help you to set up

and test anytime so as to shorten time of

installation.

Tronco's CS1000 series use high efficiency

DC magnetic brushless motors which

developed and researched ourselves with

tiny volume, high rotational speed, low

electricity consumption and not to give out

heat under the temperature 50 degrees

centigrade. It runs quietly and possesses

the functions of overloading protection and

automatic restoration, especially for high

load bearing in sites of salesroom,

hospitals, office buildings.

There are a lot of advantages for traditional

D.C. motor. Such as rapid response, potent

actuating torque, plus linear variation for

voltage and the rotational speed ... etc. For

traditional D.C. motor got respectable

market occupation but a big defect, the

high-speed sliding of brushes and

commutators causes friction each other

and even made the carbon sputtering to

bring unusual electric arcs. And further to

occur unnecessary electrical obstacles and

failures. It needs to adjust and overhaul for

a period of time and also increase the

maintenance cost. To be aimed at this

defect of brushless D.C. motor, we remove

brushes and commutators with shortcom-

ing and choose electronic components

instead. But original advantages for former

D.C. motors can still be reserved.

Tiny but ingenious, high efficiency, environmental protec-tion DC BRUSHLESS MOTOR

Between opening and closing, everything is under your control

Environmental protection, Safety, Efficient circuit system

Excellent Electrical Functions

Electrical & Kinetic Energy

On the basis of human beings and up to durability.

TRONCO

Applications of space for business affairs To follow more and more prosperous business in the present generation, the requirements of functions for commercial offices are also more

and more various. Tronco CS1000 series Automatic Sliding Door System understand your various commercial demand both in safety and

convenience. CS1000 series can also satisfy your requirements to have a comfortable, convenient and safety official environment.

The function of pressurizing to against vacant spaces

Tronco's door leaves can avoid leaking out of an air

conditioner and pollution of dust and will not have gap

when affected by wind pressure or be fiddled with.

Users need to make use of security card to access the door. The controller will

notify door leaves to open after replying the sensor.

After door opening, the sensor start to operate to react until no objects in the

inducting area and then notify the controller to close door.

After door closing, the sensor stop action and have to use security card to

open it.

This system can co-operate with various Security products easily and to

achieve the result under Security control.

In the circumstances of different levels for Security System, it is available to

install surrounding facilities anytime, such as a remote control, access

controller system, the card swipe machine, Encryption, fingerprint access...

etc.

In support of Security

Set-up for crashproof sensitivity & to examine foreign body automatically

When door leaves closed and struck staffs or foreign bodies, door leaves

will reverse. This function is available to set up sensitivity.

After door leaves reversed and re-closed, the system will close slowly to

ensure without obstacles and to resume to regular speed of opening and

closing.

This function is to assist the infrared crash proof system to avoid invalida-

tion and the injuries of staffs

Set-up for multi-function automatic locking

Substantial offices, such as a Financial Department or MIS server room,

Staffs just need to switch to the 'automatic lock up' mode when leaving. The

door leaves will close and lock up immediately after staffs left.

After staffs came back, it is capable of using key to open door leaves or to

open according to Security to achieve your demand of official safety.

Applications of stores and shopping mallTRONCO CS1000 automatic sliding door system is also applicable for stores and shopping malls, It can be your smart

assistant to manage a shop front for its various anti-rob functions and management ability.

Closing time of door leaves will be adjusted automatically after induction The pause of opening time for Tronco CS1000 series automatic sliding system

is able to set up automatically according to user's demand. Besides, plus the

function of induction and emendation, the microprocessor controller will

increase seconds automatically of opening to match up the actual situation and

reduce repeating opening consumption of door leaves and it is also no

pressure to access for staffs when the pause of opening time that pre-

scheduled is over original system values in actual using condition.

To set up waiting time of closing door in advance, the door leaves will

close according to system set-up values after door leaves opened. The

opening motion each time will follow up this timing to close door.

Waiting time is adjustable from 1~60 seconds.

When it used on doors that come in and go out frequently, especially in

rush hours, the automatic door system will judge intelligently to prolong

the closing time of door leaves automatically. When it resumes to

normal usage, the waiting time of closing will go back to original

system set-up values.

This function is fit for the usage of an Entry and Exit for automatic door

system that come in and go out frequently, such as salesroom,

commercial buildings and hospitals.

The minimum opening distance is 400mm

The minimum opening distance for CS1000

series is 400mm. It means that you can install

bi-parting automatic door systems in the

condition of smaller exits in a golden shop

front in city area.

Only Exit modeThe set-up mode can switch to "only Exit mode" before the closing time of a

shop every day, this mode can make the customers outside unable to enter

but the customers inside be able to go out. This function is also available to

apply to guide the route.

A.P.O. modeFor special circumstances, (for example in the

midnight), if customers want to buy something, you

can switch to APO mode to open door leaves in

smaller range. The staffs of store can proceed

business transactions through a crack between a

door and its frame and prevent mobsters get into.

Tronco CS1000 series automatic sliding door system possesses the function

of closing and locking speedy. When the signal displayed, the door leaves will

close and lock immediately to besiege or prohibit gangsters to prevent the

possessions and staffs from danger.

The function of rapid emergent close-off and lock-up

Applications for medical treatment centerMedical treatment science keeps improving in modern times, the requirements of automatic door systems are also

getting higher and higher. Tronco CS 1000 series automatic systems have attained a lot of good reputation on many

aspects from many medical treatment centers, such as load bearing and the safety during operation, and also

proceeded mutual cooperation. Tronco is an elite of domestic professional automatic door systems.

To supply solutions of load bearing under 1000kgs

The CS1000 series automatic sliding door system can

operate door leaves under load bearing 1000kgs easily

to cooperate with different level transmission accesso-

ries. It can also run smoothly for high carrying capacity

door leaves, such as protection against radiation doors

of medical treatment center or negative pressure doors,

fire prevention doors ... etc.

Applied to negative pressure isolation room

The CS1000 series can apply to negative pressure

isolation room and the system can also react air

pressure automatically and increase R.P.M. of Motor to

let it operate more stable and smooth.

Display of emergent signals

To supply a contact of a relay as 1, The switch over of

signal after door closed. 2, The switch over for operation

of power-driven machine. This connection point can be

cited by other control systems in the condition of

operation and the door leaves have been locked up.

The display function of signal is also capable of connect-

ing Alarm to match up your environmental requirement to

install additional control systems.

Free set-up half-opening distance of door leaves

The opening of door leaves for an operation room of hospital

only need half-open to avoid intrusion of disease germ and

infection of patients to protect their personal safety.

Simple and convenient set-up and just need to move door

leaves to the required size of opening and finish the steps

according to system set-up value.

This function can be applied to the essential exit and

entrance of a sickroom for hospital and laboratory ... etc.

A Button

B Button C Button

Set-up for Logical signals

In order to satisfy more requirements of automatic door systems, this

system can set up to be once for opening and another for closing or

reversing function immediately. It depends on your decisions of the

actual usage.

When the medical staff push a hospital bed into a laboratory. And

then press the Button A to open the door of a sickroom.

After a hospital bed was pushed into a sickroom, press the button

B to close the door leaves.

Press the Button C after finished the examination or to press Button

B to re-open the door leaves.

This function is applied to Hospitals and space of barrier-free.

A.Illustration of multiple-points switch

B.Illustration of two-way reverse at once

In some places that required to have highly

control for the operation of door leaves, it is able

to set up the function to reverse at once. That is

to say, the door leaves can be touched off the

opposite direction movements anytime under the

closing and opening conditions. This function can

satisfy the demand in some places that required

to control completely by person for the opening

and closing of door leaves immediately. Such as

exits or entrances of special warehouse,

government apparatus under control, prisons and

research centers highly regulated.

The best protection of hygiene and healthInfectious diseases are more and more

formidable and easy to infect in the present

generation. To make use of automatic door

systems can avoid being infected at a touch and

disease spreading out.

The living example for application

The amazing longest opening distance 12000mm

The longest opening distance is around 12000mm for CS1000

series, if to collocate with bi-parting automatic door system, the

longest opening distance can reach 24000mm. Its smooth action

and complete functions make it suitable for the applications of

large-scale storage rooms, warehouses... etc.

Level L5 door leaves

(700kgs~1000kgs) belong to

heavy-duty level. It generally be used

as anti-radiation doors or fireproofing

doors... etc. See attached photo AB,

they are the actual testing records of

heavy door leaves with 831kgs that

cooperated with Level L5 accessories

of CS1000 series.

Maximum permissible loading of 1000Kgs

Solutions of Doorway of Small SpaceThe minimum opening distance of CS1000 series is 400mm. That means you can install bi-parting automatic door system in small storefront located at the prime site of downtown area.

Set-up motions for door leaves in a fire accident and ordinary emergency EscapeTronco CS1000 series automatic sliding door system can cooperate with fire prevention door to do fireproof discrimination. There are five

types of emergent movements for door leaves, fire compartment and escape route can be set up in advance. When a fire accident comes up,

these movements will help door leaves to close off the scene of a fire, escape guidance and emergent power supply in reserve ... etc. They

can decrease the loss to the lowest level and protect the safety of your life and property.

To close door leaves immediately and enter into the condition of

pushing aside lightly and auto-opening

Upon receipt of the signal for the fire accident, this function will close the

door leaves immediately but can accept the inducting signal of opening

door. For example, if you open door leaves by manual pushing, the door

leaves will open automatically after reacting the thrust. It is applied to a

sidewalk of indoor and in favor of fleeing.

The door leaves will close at once and keep sustained tightening

Upon receipt of the signal for the fire accident, this function will help to

close at once but not lock up. The escapee can exert himself to open door

leaves. The door leaves will close automatically after manual opening. This

function is applied to the non-essential fleeing access or the locations that

easy to occur fire accident or the locations of chief motor room /

warehouse to close off the scene of a fire to cooperate with fire prevention

door to protect significant information and property.

It is applied to the access with lower using frequency for a chief motor

room, treasury or warehouse.

To close door leaves at once and enter into the condition

of manual operation

Upon receipt of the signal for the fire accident, this function will close door

leaves at once but not lock up and enter into the condition of manual

operation. The door leaves can open up and close down easily by hand

whatever old persons and young kids. It is applied to the indoor aisle and in

favor of fleeing.

To open up door leaves to the end without any terms

Upon receipt of the signal for the fire accident, the door leaves will open up

speedy until the signal stop in the chief access of each floor. This function

helps the staff to search out the escape exit rapidly to move off the scene of

fire accident. It is applied to the chief escape exit.

The automatic multi-function set-up of lock upThe CS1000 series support UPS to connect with rechargeable batteries or

normal batteries. The rechargeable function is able to turn off as you

installed normal batteries. The controller can induce the volume of power for

emergency. It is also available to set up the status of door leaves in advance

as power of emergency is going to use up. All up to your decisions.

A. Regular opening

B. Regular closing

C. Manual opening

D. Regular closing and lock up

To close door leaves immediately and accept the signal of openingUpon receipt of the signal for fire accident, this function will close door

leaves immediately and keep sustained tightening but can accept the

signal of opening door. It is able to ignore safety beams and the

function of crashproof foreign body detection.It is applied to the

indoor aisle.

Set up functions easilyTRONCO CS1000 automatic sliding door system make the door leaves can be set up thirteen complex motions on program selector and the operation is easy and convenient.

Under the general mode, door leaves will cover the whole distance when accept the signal of opening or closing, it's the usual condition.

After this mode be actuated, door leaves will lock up after opening or closing, this function can be used at:A, Automatically lock up to be closed after staffs leavingB, Automatically lock up to be opened when carrying somethingLock up at the location of closing

or opening in general mode

Half-opened mode

Button Combination Illustrations of door leaves' motion Description

General mode


After this mode be actuated, door leaves will be half-opened or half-closed as soon as receiving signal and can only accept the go-out signal.

After this mode be actuated, door leaves will be half-opened or half-closed as soon as receiving signal, then only accept the go-out signal and will be locked up in the opened or closed condition.

Lock up in the half-opened mode

Controller will accept the signal of opening or closing and then sustain the door leaves to be half-opened or half-closed and lock up when actuating this mode.

Half-opened and exit-only mode with the door locked up in the opened or

closed condition

Half-opened and exit-only mode

Keep-opening mode

Half-opened mode with the door leaves locked up in the opened or closed condition


Exit-only mode

After this mode be actuated, the door leaves will be closed automatically and lock up, will not be opened even if receive the open-signal.

After this mode be actuated, door leaves will only accept the signal from inside to outside and put into action, the signal from outside to inside will not be accepted. So this mode can used be the route guide and to control the staffs' out and in.

After this mode be actuated, the door leaves will only accept the signal from inside to outside and put into action. The signal from outside to inside will not be accepted when the door leaves are locked up in opened or closed condition

Keep-closing mode with the door leaves locked up in closed condition

A.P.O. Mode

Keep-closing mode

After this mode be actuated, the door leaves will be closed automatically and will not open even if receive the open-signal, this mode can used be route guide.

Exit-only mode with the door leaves locked up in opened or closed condition

If customers want to buy something in the midnight, you can switch to APO mode to open door leaves in small range. The staffs of store can proceed business transactions through a crack between a door and its frame and prevent mobsters break into.

It is capable to set up "Trigger" switching

to "Latch" for 4 sets functional contacts.

This system supply 4 sets functions. A. To

close doors B. To lock up C. Fireproofing

D. The prevention of robbing. It is no

problem to set up functions freely from

"Trigger" switching to "Latch", whatever in

opening or closing mode, it can set up to

be your preferable mode and no need to

purchase new switches and only need to

re-setup system in the process of

installation.

To gather up wiring in favor of mainte-

nance.

To be arranged in all kinds of Connecting

sensors, Security control systems, Power

supply, Emergent stopping buttons,

Security switches, Timing controller,

Multiple function expanding facilities to

gather up and fix on the wiring HUB and

make it ordered and be clear at a glance in

favor of construction and examination or

modification for wiring in the future.

Hangers of door leaves are adjustable

for locations "up", "down", "front", "rear".

Hangers of door leaves can process slight

adjustment for locations "up", "down",

"front", "rear" , the vertical and horizontal

height on the rail to achieve accurate

construction in favor of maintenance and

adjustment in the future. Hangers of door

leaves can pass through the underneath of

Motor so as to make the installation and

adjustment of door leaves easy.

Detecting breakdowns and protecting

itself in abnormal situations

This system possesses the function of

detecting breakdowns itself. When the

system out of order, the Led lamp will flash

lights to reveal the anomalous conditions to

remind maintenance staff to survey and

maintenance promptly, for example, if

foreign matter interfere with the process of

operation for door leaves and bring about

extraordinary conditions, the door leaves

will reverse and test automatically. If the

extraordinary conditions still fail to shut out

after several times examination, the system

will stop the operation automatically to

avoid accident and the destroy of automatic

door systems to extend its using life-span.

Learning itself after switching on and

judging itself after operation.

After switching on, the system will learn the

operational logic automatically itself

according to the weight of door leaves and

factors of the scene. It will operate itself

automatically and not need man-made

set-up additionally. This system will also

judge itself automatically to see if in

extraordinary situations or to reveal alarm

signals according to the figures of starting

operation for door leaves.

Led Display

This system displays self-inspection signal

of motor's operation. The maintenance staff

reviews signals to see if the operation of

motor is normal by means of LED (light

emitting diode). Upon receipt of any

extraordinary signals of automatic door

systems, the maintenance staff will do

suitable handling for failures on-site directly.

The function of buzzer is adjustable.

This system included the function of buzzer.

It will alarm and remind automatically in

below 4 conditions and you got 4 choices to

set up the status and to adjust according to

the demand of exact environment. A. The

first time detecting stroke B. To reset the

location of switch-on C. The alarm of

knocking against foreign matters. D.

Warning signal of abnormality.

Full accessories, modular, speedy

installation and easy maintenance

Tronco CS1000 series automatic sliding

door system is modulize for full compo-

nents, easy examination, easy maintenance.

In addition, its high compatibility is available

to collocate with other brand components.

To load and unload is very easy for RJ45

connecting wire

The signal wire hole for Tronco CS1000

series automatic sliding door system is

RJ45 wire hole. Easy to obtain and easy to

install.

Easy installation, Easy maintenance

Installation

Microcomputer digital controller

Intelligent digital controller that is micro computerized completely. The regular function circuit is controlled by the computer

indication with fixed-point switch free. The door position adjustment, tracking distance set-up, various energy strength, open

and closing speed are all controlled by the microcomputer. In a long time operation, the open and closing ction is still precise.

Auto-detection by the microcomputer improves the using safety: When the auto-door is opening and closing, if the door hits

something while functioning, the digital control system will reverse moving immediately and get into safety protection condition

with a continuous warning sound to avoid the accidence of any damage to human body or broken machine parts and increase

the entering safety

Drive belt

Hi flexible function is provided with superior anti-gland feature that can be repeated uses without getting loosen and fatigued

resilience after long term sing.

Drive motor

Hi efficiency permanent magnet brushless serve motor, which is small volume, Hi-RPM and low power consumption that will not

heat after continuous using. It makes the door open and close quickly and silent during whole functioning period. For the

reason of strong twist distance, the door can execute the mission of the door open, close, slow speed, and stop correctly.

Precise interior, intelligence includedLow-resistance power transmission system

Aluminum alloy housing

Strong alloy housing with the flexible using may easily combine with other accessory parts after cutting. The alloy housing is

one-unit shaping that has beautified profile and smooth track would not get deformed or worn down after long term using.

Increasable entrance guard system available

Good quality of the CS series has super-elasticity expended functions with entrance guard system together allow only

inhabitants or management open the auto-door that prevent other people enters to the department. It did achieve a target of the

intelligent auto door can accept inhabitants or specified people entrance.

Door fixing hanger

The door system is adapted the hanger type of the fixing hardware with small resistance and smooth turning that is easy to

open and close. It equips with stopper wheel to prevent the door from slipping down.

Rails and Hangers

L1 L2 L3 L5L4

90~150Kg 150~240Kg 700~1000Kg400~700Kg240~400Kg

L1-S/L1-SA L3-DDAL2-DDA/L2-DSA L4-DBW L5-DBW

90Kg X 1

75Kg X 2

150Kg X 1

120Kg X 2

240Kg X 1

200Kg X 2

400Kg X 1

350Kg X 2

700Kg X 1

500Kg X 2

The structural drawing of Rails

Max. Capacity of Bi-parting

185

mm

91mm

221m

m

L5 level rails and hangers (700kgs~1000kgs)

L5 level rails and accessories are special designed for door leaves that

belong to the load between 700kgs and 1000kgs. To collocated with the

formidable functions of CS1000 series, they can satisfy the professional

demands for fire-prevention doors, anti-radiation doors ... etc. The main

structure is all-in-one shaped right-angled material. The interior space can

accommodate mechanical operation of automatic door systems and the

design makes hanger operate smoothly without any affections of motor's

configuration.

The key material of the rails, where the most track stress produced,

adopted heavy-duty extruded Aluminum, the thickness is over 11mm so to

supply the requirements of 700Kg-1000Kg capacity. Besides, in order to

supply better protection from abrasion, the sliding rail of hanger wheel, we

adopted special compound material - carbon steel material to decrease

abrasion and increase the life-span.

DBW hangers adopted high strength steel material to compose double

wheels self-leveling and loading type hanger. It is applied to the usage of the

operation for level L4 ~ L5 door systems. L5 rails and accessories passed

through the national endurance test and acquired widespread reverberation.

Hanger CatalogueLevel

Weight Range

Max. Capacity of Single

Hanger

Carbon Steel

Width:700~1500mm↓

Height:1900~2400mm↓

(Max)Width:5000mm↓ Height:3500mm↓

(Min)Width:450mm↑Height:Up to exact design-for special dimensions,

please contact with the commercial agent.

150-650 mm/sec (Adjustable) 150-450 mm/sec (Adjustable)

Output Power

Motor

Watt

Case Dim.

Ambient temperature

Capacity

Power supply

Tracking

Door Fitting Size(Min&Max)

Level

Speed

Door Fitting Size

Consumption

Temp. range

CS1000 specification

Please refer to the right side and confirm with

the commercial agent(manufacturer)upon

manufacturing and using

Please refer to the right side and confirm with

the commercial agent(manufacturer)upon

manufacturing and using

CS1000-L1 CS1000-L2 CS1000-L3 CS1000-L4 CS1000-L5

ActivatorDrive unit and control

Emergency stoppushbuttonclose to door

Programswitches

Safety Beam

Outside:Key switch,code card readerwith floatingcontact or similar

Inside:Pushbutton

Touchless SensorSwitch

Power Supply

AC 110V 60HZ

AC 110V 50HZ

Connections

Max

. cab

le le

ngth

100

m

Four steps to easily purchase the automatic door system tally with your requirements

A. Choose the functions you need. Tronco automatic door systems offer you multiple functions to choose from according to your

environmental and functional requirements.

B. Make sure of the capacity code. After ensuring the door leaves' type(Single or Bi-parting) and weight, you can decide your capacity

code referring to the Table 'Hanger Catalogue'.

C. Make sure of the accessory code. We enumerated many different combined solutions in accordance with customers' needs, such as

SS, SB, PS1...etc. You can refer to the Table 'Purchase Guidance' on the next page and choose the suitable solution according to your

budget and actual situation.

D. Confirmed the codes of product and place order to us.

Code rules of products

Capacitycode

Accessory code

Function code

The items remaked on Table 'Purchase Guidance' mean these related products are available and the details please refer to P.36 ; P.37 ; P.38.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Bottom Guides have a great variety and please refer to P.36 to select the suitable type according to fitting-on enviroment

CS1000

Motor Brushless DC electric motor

Rail L3R/L3C

Accessory code

Door leaves Type

Controller

Belt

Railaccessory

Hanger

Beltconnection

Idler pulley

Beltaccessory

Hangerguide

Door stop

Side Cover

Fixingaccessory

Har

dwar

e ac

cess

ory

Toothed belt 4.5 m X 1

Toothed belt 8 m X 1





Bottom guide

Program selector

Signal connection

Wire

Sensor

Safety device

Security

Electric lock

Wireless

UPS

Alarm & Voice

Switch

Rel

ated

pro

duct

s

CS1000-L1 Purchase Guidance

BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09

BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09

BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09

L2-DDA

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A


CS1000

Motor Brushless DC electric motor

Rail L3R/L3C

Accessory code

Door leaves Type

Controller

Belt

Railaccessory

Hanger

Beltconnection

Idler pulley

Beltaccessory

Hangerguide

Door stop

Side Cover

Fixingaccessory

Har

dwar

e ac

cess

ory







Bottom guide

Program selector

Signal connection

Wire

Sensor

Safety device

Security

Electric lock

Wireless

UPS

Alarm & Voice

Switch

Rel

ated

pro

duct

s


BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09

BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09

BA11

BA01

BA04

BA09

BA11

BA06

BA01

BA04

BA09


HG-09

L3-DDA

CS1000

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

L5R

Motor

Rail

Accessory code

Door leaves Type

Controller

Belt

Railaccessory

Hanger

Beltconnection

Idler pulley

Beltaccessory

Hangerguide

Door stop

Side Cover

Fixingaccessory

Har

dwar

e ac

cess

ory

Bottom guide

Program selector

Signal connection

Wire

Sensor

Safety device

Security

Electric lock

Wireless

UPS

Alarm & Voice

Switch

Rel

ated

pro

duct

s




Brushless DC electric motor







33


CS1000

Toothed belt W:15mmL:4.5m

Toothed belt W:15mmL:8m




N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

L5R

Motor

Rail

Accessory code

Door leaves Type

Controller

Belt

Railaccessory

Hanger

Beltconnection

Idler pulley

Beltaccessory

Hangerguide

Door stop

Side Cover

Fixingaccessory

Har

dwar

e ac

cess

ory

Bottom guide

Program selector

Signal connection

Wire

Sensor

Safety device

Security

Electric lock

Wireless

UPS

Alarm & Voice

Switch

Rel

ated

pro

duct

s





CS1000






N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

L5R

Motor

Rail

Accessory code

Door leaves Type

Controller

Belt

Railaccessory

Hanger

Beltconnection

Idler pulley

Beltaccessory

Hangerguide

Door stop

Side Cover

Fixingaccessory

Har

dwar

e ac

cess

ory

Bottom guide

Program selector

Signal connection

Wire

Sensor

Safety device

Security

Electric lock

Wireless

UPS

Alarm & Voice

Switch

Rel

ated

pro

duct

s






Optional AccessoriesBottom guide

Signal connection

Program selector

Wire

NO.

Detection Method: Infrared

Detectable Distance: Within 3Meters

Adjustable Angle:

5-22 Degree Spiral fine-tuning

Power Supply

Watt. Consumption

Size

Work Temperature

NO.

Detection Method: K Wave Band

Detectable Distance

Detectable Area: or

Operation Voltage:

Size

Work Temperature

Action Induction Rate: Rate

NO.:

Set-up Distance:

Rising Edge Rate:

Falling Edge Rate:

Power Supply

Power Consumption:

Work Temperature:

Voltage Input

Work Temperature:

Size

NO.:

Work Range:

Protected Height:

Optical Eyes Amount:

Light Beam Amount:

79 beams of Cross Light

Maximum Anti-environmental light:

Work Voltage:

Size:

Cable Length:

Protection Level:

Work Temperature:

Action: Restorable

Capacity

Conjunction Points:

Switch Type:

Imported V-Type Micro-switch

Cable Spec:

NO.:

Power Supply

Power Consumption:Below 3.0VA

Detectable Distance: Within 5M

Reflection Time:0.1 Second

Dwell Time (Adjustable)

Detectable Object

Work Temperature

Weight:

Related ProductsSensor Switch

CS1000專業完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

Documents

Transcript of CS1000專業完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

CS1000專業 完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

Documents

Transcript of CS1000專業 完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

CS1000專業完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...

Transcript of CS1000專業完稿 P1 - RAC Hardwarerachardware.in/Download/Tronco_CS1000.pdf · CS1000 series is...