CS Unitec Reciprocating Saws

REC

IPRO

CA

TIN

GSA

WS

4 • 1-800-700-5919 • Visit our Web site at www.csunitec.com

Reciprocating Air SawsReciprocating Air Saws

PL Saws - For High-volumeProduction Environments p. 5

CL Saws - For DemandingMaintenance Applications p. 6

JP Saws - For Fiberglassand Sheet Metal Production p. 7

Cengar Air Saw Blades

HB300/18HB300/24HB300/32MC220/24MYN150/18MYT150/18

HandHandHandMachineNotched YellowTapered Yellow

18 TPI24 TPI32 TPI24 TPI18 TPI18 TPI

12" L12" L12" L81/2" L6" L6" L

1/2" Wide Bi-metal Blades (for CL50, JP901 and PL905)

MB150/18MB200/10-14MB200/18MB200/24MB250/18MB250/24MB300/10-14MB300/18

MachineMachineMachineMachineMachineMachineMachineMachine

18 TPI10/14 TPI18 TPI24 TPI18 TPI24 TPI10/14 TPI18 TPI

6" L8" L8" L8" L10" L10" L12" L12" L

3/4" Wide Bi-metal Blades (for CL75)

Compact, Quiet & ReliableLow Vibration/Low Air VolumeCut Pipe, Structural Steel, Sheet

Metal, Fiberglass, Plastic and More.

• Piston air motors use low air volume (CFM)while maintaining a fast cutting speed (2000to 10,000 strokes per minute)

• Safe around gas and other flammablematerials; recommended for fire and rescueapplications where high CFM isn't available

• ATEX Certified – for use in hazardous areas• CL and PL saws use standard hand hacksaw

blades; convert to a 3/4" blade size simply bychanging the nosepiece

• Rugged saw bodies constructed of heavy-duty cast steel and aluminum

• Built-in lubrication system automaticallylubricates the motor

• Safety STOP/Isolator button disconnectsair supply

Lubricating Oils (see p. 29)• ProLube™ is a super-premium, low-viscosity

synthetic air tool lubricant

• ProLube-ATL/AF is a special blend preventingfreezing in cold climate conditions

MS Cleaner (MS 9105)• An ideal conditioner for air tools used underwater

ATEX CertifiedATEX Certified

ECO32-T and ECO32-TAKECO32-T and ECO32-TAKReversible motor for drilling and tapping applications

Cuttercapacity 11/4" dia.

REC

IPRO

CA

TIN

G S

AW

S

5• 1-800-700-5919 • Visit our Web site at www.csunitec.com

Reciprocating Air SawsReciprocating Air SawsIdeal for cutting pipe, metals, fiberglass and more

Motor PowerStroke LengthStrokes per Min.WeightLength x Height x WidthAir ConsumptionAir PressureAir ConnectionAir HoseNoise Level (dB)Vibration Level (m/s2)

1 HP7/8"

20005 1/4 lbs.

113/4" x 51/4" x 15/8"4 CFM90 PSI

1/4" NPT1/4" ID

691.73

Model PL905

Low Vibration • Low Noise• Ideal for high-volume production applications

such as cutting steel, repairing wooden pallets,building and repairing truck bodies and cuttingfiberglass

• Also widely used by oil and gas contractors andfire rescue services

• Sturdy cast steel and aluminum saw body

• Low air volume – only 4 CFM

• 7/8" blade stroke, up to2000 strokes per minute

• Fitted with easy-to-useSTOP/Isolator button onthe handle for safety whenchanging blades

• Uses any 1/2" (12mm) wideBi-metal hand, machine oryellow blades

Model PL905Sturdy air saw for continuous use

Standard Equipment:carrying case, fiveMC220/24 saw blades,air tool oil, CD operatingmanual, allen key.

Cengar Saw Blades and Accessories (see page 4)

• 1/2" wide Bi-metal Blades suit a wide range of applications


Cut Sheet Metal

Cut Nails

REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air SawsIdeal for cutting metal, timber and fiberglass

Low Vibration • Low Noise• Workhorses for use in the fabrication,

shipbuilding, ship repair, oil andpetrochemical, boat building andaircraft maintenance fields

• Also utilized by fire and rescueprofessionals

• 13/4" blade stroke, up to 1200 strokesper minute

• Fitted with easy-to-use STOP/Isolatorbutton on the handle for safety whenchanging blades

• CL50 uses any 1/2" (12mm) wide Bi-metal hand or machine blade andcan be easily converted to a CL75 bychanging the nosepiece

• CL75 uses a 3/4" (19mm) wide Bi-metal machine blade

Standard Equipment: carrying case, five MC220/24 saw blades, air tool oil,CD operating manual, allen key.


1 HP1 3/4"1200

51/2 lbs.153/4" x 51/4" x 15/8"

53/4 CFM90 PSI

1/4" NPT1/4" ID

833.69

Models CL50 & CL75

Models CL50 & CL75Rugged air saws for versatile applications



• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications

• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075



REC

IPRO

CA

TIN

G S

AW

S


Reciprocating Air SawsReciprocating Air SawsIdeal for cutting fiberglass, light-gauge metal & fiberboard

Low Vibration • Low Noise• Ideal for cutting fiberglass,

light-gauge metal and fiberboard up to 3/8" (10mm) thick

• Utilized by boat builders and in theconstruction and repair of car, bus and truck bodies

• Low air consumption – only 4 CFM

• 3/8" blade stroke, up to 10,000 strokesper minute

• Has automatic lubrication and an easy-to-use STOP/Isolator button on thehandle for safety when changing blades

• JP901 uses any 1/2" (12mm) wide Bi-metal hand, machine or yellowblades and can be easily converted to use 3/4" blades by simply changingthe nosepiece

Standard Equipment: carrying case, five MYN150/18saw blades, five MYT150/18 saw blades, air tool oil,CD operating manual, allen key.


1 HP3/8"

10,00031/2 lbs.

103/4" x 23/4" x 15/8"4 CFM75 PSI

1/4" NPT1/4" ID

691.23

Model JP901

Model JP901Speedy, lightweight air saw for repair and construction environments



• 1/2" and 3/4" wide Bi-metal Blades suit a widerange of applications

• To fit our 3/4" Bi-metal blades, order 3/4"nosepiece – Part. No. 5075

REC

IPRO

CA

TIN

G S

AW

S

8

Portable Reciprocating SawsPortable Reciprocating Saws

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

The most powerfulin the industry!

Hand-held or clamp-on cuttingin tough environments

Pneumatic • Hydraulic • Electric Ideal for a wide range of industries,

including subsea, gas utilities,offshore oil, petrochemical, power

generation, industrial plantmaintenance and construction

• Fast cutting of pipe, structural steel,bolts, nails, pallets and other material

• The best power-to-weight ratios in the industry

• Compact size allows cutting inconfined spaces

• ANC gear drive reduces friction andincreases gear life and power output

• Cut steel pipe and channel up to 6" dia. (or plastic pipe up to 8" dia.)

• 90˚ cuts with optional clamps

The CAT - 1.3 HP PneumaticReciprocating Saw p. 10

The WOLF - 1.6 HP PneumaticReciprocating Saw p. 11

The SHARK - 2 HP HydraulicReciprocating Saw p. 12

Pipe Clamps for 90˚ CuttingCut faster by increasing

your leverage 5xwhile safely

securing thesaw with our

Pipe Clamps.

Pipe Clamp for Pipes & Profiles

1/2" - 2" Pipe Vise Clamp – Model No. 259.9832 1/2" - 4" Pipe Vise Clamp – Model No. 563.1001/2" - 6" Pipe Chain Clamp – Model No. 251.259

The FOX - 9.5 and 12 AmpElectric Reciprocating Saws p. 12

Two Models:Spade (below) or D-handle(right) available.

90˚Model No. CP1 Universal Clamp• Easily attaches to recip saws and

portable hacksaws for 90˚ cuts intight spaces

• Self-aligning feet adjust tothe form of the workpiece(round, square and angled)

• 1/2" to 6" capacity with recipsaws – see page 16 for usewith portable hacksaws


REC

IPRO

CA

TIN

G S

AW

S


The New Generation Gear HeadANC = All-round Needle-bearing Crank Drive

Reciprocating SawsReciprocating Saws

ANC Gear Drive: Low Friction • High TorqueThe new, unique design of the ANC gear:

• reduces friction and wear, resulting in lessheat and longer service life.

• resists dust and water, making the gear headmaintenance free.

• allows for aggressive high-torque cutting,providing good chip flow and long blade life.

CS Unitec's reciprocating saws cut faster and last longerthan other saws in their class.The ANC gear drive and heavy-duty air or electric motor provide the best power-to-weight ratio in the industry.

ANC geardrive

Ergonomicallyshaped

housing grip

Universal 1/2" tang, double-tang or M-Tooth blade moves in aggressive orbital action

Patentedsaw blade

mount

Patentedsquare lift rod

Powerful, heavy-duty pneumatic

or electric motor

Siliconegasket

Pipeclamp

connection

Reciprocating Saw Blades

Extremely versatile, CS Unitec'sreciprocating saws use the universal 1/2" tang or special double-tang saw blades (see page 13).Our extra-thick saw blades resist bending and cut pipe at right angleswith a pipe clamp.

In addition, CS Unitec's Mega SharpM-Tooth saw blades (see page 13) have a unique, patented tooth geometry that allows these blades to cut quickly with each stroke,forward and back, saving timeand money.

Standard BladesAll CS Unitec reciprocating saws can usethe widely available standard reciprocatingblades with the 1/2" universal tang.

Heavy-duty BladesThese blades are much thicker thanstandard blades and have a strongerdouble-tang mount for heavy-dutycutting, either free-hand or with a clamp.

M-Tooth BladesUnique tooth geometry allowsthese blades to cut in bothdirections – twice as fast!

Cut inBoth Directions!

REC

IPRO

CA

TIN

G S

AW

S


1.3 HP Pneumatic Reciprocating Saw1.3 HP Pneumatic Reciprocating SawIdeal for cutting pipes, structural steel, pallets and more

Saw Kit (5 1217 0060)includes saw, 6" pipe clamp,case and five No. 1001heavy-duty blades.

Model 5 1217 0020 includes carrying caseand two No. 1001 heavy-duty blades.

Reciprocating Saw Blades and Accessories (see page 13)

• Universal saw blades

• Thicker, heavy-duty double-tang blades for 90˚ cuts

• M-Tooth blades to cut onforward and back stroke

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.3 HP1 1/8"

0-18009 lbs.15 7/8"

46 CFM90 PSI

1/2" NPT (ID)Order Model 5 1217 0060

Model 5 1217 0020

Model 5 1217 0020Use hand-held or with a clamp

TheCAT

Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting

• Cuts steel pipe and channel 1/2" to 4" dia., plasticpipe to 8" dia.

• Ideal for the toughest use in refineries, chemicalplants, gas utilities, construction, offshore oil,mining, marine and demolition industries

• 1.3 HP air motor provides more power thanconventional air saws

• 11/8" blade stroke for fast, efficient cutting

• Can be mounted on a pipe clamp to make 90˚ cuts

• Variable speed of 0-1800 strokes per minute

• Accepts universal saw blades or thicker, heavy-duty double-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip

• One-year warranty




REC

IPRO

CA

TIN

G S

AW

S


1.6 HP Pneumatic Reciprocating Saw1.6 HP Pneumatic Reciprocating SawIdeal for cutting pipe, structural steel and other materials

• Cuts steel pipe and channel 1/2" to 6" dia., plastic pipeto 8" dia.

• Powerful 1.6 HP motor with reciprocating action for steel and long orbital stroke for cutting soft materialsincluding wood, plastic and aluminum

• Can be mounted on a pipe clamp to make 90˚ cuts

• 11/8" blade stroke for fast, efficient cutting

• Selector switch changes stroke setting to eitherstraight or orbital

• Variable speed from 0-2200 strokes per minute

• Accepts universal saw bladesor thicker, heavy-duty double-tang saw blades (see page 13)

• Molded rubber boot for ergonomic grip; sidehandle included

• One-year warranty

Saw Kit (5 6005 0060) includes saw, 6" pipeclamp, case, side handle and five No. 1001 heavy-duty blades.

Motor PowerStroke LengthStrokes per Min.WeightLengthAir ConsumptionAir PressureAir ConnectionSaw Kit

1.6 HP1 1/8"

0-220010 3/4 lbs.

17 3/4" 51 CFM90 PSI

1/2" NPT (ID)Order Model 5 6005 0060

Model 5 6005 0010

TheWOLF

Pipe Clamps for Straight Cutting up to 6" dia.• Increase leverage

5x for faster cutting

• Safely secure thesaw while cutting






Shown with side handle

Selector switch forstraight or orbital stroke


Cuttercapacity 2" dia.

REC

IPRO

CA

TIN

G S

AW

S


Subsea, mining, utility and construction applications

The FOXmini hacksaws –

industry's most powerfulelectric recip saws!

Single Speed5 6002 0000Variable Speed5 6002 6000**5 6002 7000**

* 220 Volt also available ** 5 6002 6000 with speed control dial, 5 6002 7000 with variable-speed trigger.

9.5 Amp, 110V*

12 Amp, 110V*

9.5 Amp, 110V*

Power

2200

0-2200

0-2200

Strokesper Min.

StrokeLength

11/8"

11/8"

11/8"

Spade

Spade

D-handle

19"

19"

19"

Handle Style

6

6

6

Length Weight(lbs.)Model No.

Model 5 6002 7000 with D-handle variable-speed trigger.

Models 5 6002 0000 and 5 6002 6000with spade handle. Model 5 6002 6000has variable-speedcontrol dial.

Hydraulic Reciprocating SawHydraulic Reciprocating Saw

• Cut steel pipe and channel 1/2" to 4" dia., plastic pipe to 8" dia.

• Powerful 9.5 and 12 Amp motors,110 Volt/60Hz (or 220 Volt/50Hz)

• Ideal for plumbing and electricalcontractors as well as demolitionjobs, pallet cutting and more

• 11/8" blade stroke for fast cutting

• 0-2200 variable stroke speed for models 5 6002 6000 and 5 6002 7000





Standardequipmentincludes 2"pipe clamp(#259.983),

carrying caseand two No.1001 blades

Accept universalsaw blades orthicker, heavy-

duty double-tangsaw blades (see

page 13)

Motor PowerOil PressureOil FlowStrokes per Min.WeightHydraulic ConnectionHose ID*

* Hoses are not included

2 HP2000 PSI

6 GPM (up to 13)1700

13.2 lbs.M 18 x 1.5 Male

1/2" ID with 1/2" FF Couplings

Model 5 1219 0010

• Marine, mining, utility andconstruction applications

• Operate on 2000 PSI / 6 GPM(up to 13 GPM) hydraulic oil

• Cut wood up to 6" dia., metalup to 3/4" dia.


Electric Reciprocating SawElectric Reciprocating Saw

The SHARK

• 1-800-700-5919 • Visit our Web site at www.csunitec.com

REC

IPRO

CA

TIN

G S

AW

BLA

DES

13

Reciprocating Saw BladesReciprocating Saw BladesSuper quick and precise for pipe, steel, plastic, etc.**Use ProLube™ Specialty Lubricants with your Reciprocating Saw Blades to help your

tools work cooler, longer and more efficiently. ProLube Lubricants are non-toxic andideal for stainless steel and hard metal cutting applications. See page 31 for details.**

No. 1001No. 1002No. 007D/200** 007D/200 has universal 1/2" tang • Ask for special blades to cut stainless steel.

Cuts pipe up to 2"Cuts pipe up to 4"Cuts pipe up to 4"

8 TPI8 TPIM-Tooth

6" L x 1" W x .060" T8" L x 1" W x .060" T8" L x 1" W x .050" T

Extra-thick Blades for 90˚ Cutting with a Pipe Clamp, Double Shank*

General-purpose Bi-metal Saw Blades with Universal 1/2" Shank

No. 007/150No. 007/200No. 007/280

Metal 1/8" and ThickerM-ToothM-ToothM-Tooth

6" L x 3/4" W x .035" T8" L x 3/4" W x .035" T12" L x 3/4" W x .035" T

No. 006/150No. 006/250

Metal up to 1/8" ThickM-ToothM-Tooth

6" L x 3/4" W x .035" T7" L x 3/4" W x .035" T

Cast Steel, Ductile Iron, Ceramics and Glass Fiber ProductsNo. D12/200 Tungsten Carbide Coarse 8" L x 3/4" W

No. 1005No. 1003No. 1004

10/14 TPI10/14 TPI10/14 TPI

6" L x 1" W x .035" T8" L x 1" W x .035" T12" L x 1" W x .035" T

Heavy-duty HSS-Bi-metal Blades for Freehand Sawing, Double Shank

Made of tough, resilient steel with 10/14 variable tooth pitch. The large blade width and double-shank mountdeliver excellent cutting performance and durability.

Mega Sharp M-Tooth Saw Blades for Freehand Cutting with Standard 1/2" Shank

CUTS TWICE AS FAST!M42 Bi-metal for cutting steel and stainless steel

The patented M-Tooth sawblade cuts 2x faster than ordinaryblades. The teeth are designedto cut on the forward and backstrokes, thereby saving time.

Cuts inBoth Directions!

No. 3013/150No. 3013/200No. 3018/280

Metal 1/8" and Thicker14 TPI14 TPI10 TPI


No. 3021/150No. 3021/225No. 3021/300

Plastic, Wood, Plasterboard6 TPI6 TPI6 TPI


No. 810C/150No. 810C/225

All Woods with Steel (i.e. Embedded Nails)8/10 TPI8/10 TPI

6" L x 3/4" W x .035" T9" L x 3/4" W x .035" T

Metal up to 1/8" ThickNo. 3014/150 18 TPI 6" L x 3/4" W x .035" T

Metal up to 1/8" Thick (for Curved Cuts)No. 3017/90 18 TPI 35/8" L x 5/16" W x .035" T

CS Unitec Reciprocating Saws

Technology

Transcript of CS Unitec Reciprocating Saws