CRUISE 7 INSTALLATION GUIDE - Hudson Marine
2
2. Parts included 1. Display unit 2. Corner clips 3. Bracket mounting kit • Bracket • 2x knobs • 4x screws, self-tapping #10 X 3/4 PN HD SS 4. Cable and fuse kit • Power cable • Fuse and fuse holder 5. Skimmer transducer 6. Document package *988-12382-002* CRUISE 7 INSTALLATION GUIDE Details IPX6 IPX7 -15°C to +55°C +5°F to +131°F 60°/50°, top/bottom 70°/70°, left/right 0.96 Kg 2.12 lbs Sunlight readable Kg 263.0 mm (10.35“) 236.3 mm (9.30“) 30.5 mm (1.20“) 248.2 mm (9.77“) 145.5 mm (5.73“) 83.3 mm (3.28“) 100.0 mm (3.58“) 163.0 mm (6.42“) Wiring A. Installation Manual Installation Manual Installation Manual Installation Manual 1. 3. 4. 1x card reader slot Micro SD TM 10.4 to 17.0 V DC < 16.3 W (3 A fuse) B. 5. Compliance statements The relevant Declaration of conformity is available in the product’s section at: www.simrad-yachting.com This product complies with: • CE under RED Directive 2014/53/EU • the requirements of level 2 devices of the Radio communications (Electromagnetic Compatibility) standard 2017 Warning The user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Accessories (sold separately) A. Sun cover Part no.: 000-15068-001 B. Panel mounting kit Part no.: 000-15071-001 6.
Transcript of CRUISE 7 INSTALLATION GUIDE - Hudson Marine
2.Parts included1. Display unit2. Corner clips3. Bracket mounting kit
• Bracket• 2x knobs• 4x screws, self-tapping
#10 X 3/4 PN HD SS4. Cable and fuse kit
• Power cable• Fuse and fuse holder
5. Skimmer transducer6. Document package
*988-12382-002*
CRUISE 7INSTALLATION GUIDE
Details
IPX6IPX7
-15°C to +55°C +5°F to +131°F
60°/50°, top/bottom70°/70°, left/right
0.96 Kg2.12 lbsSunlight readable Kg
263.0 mm(10.35“)
236.3 mm(9.30“)
30.5 mm(1.20“)
248.2 mm(9.77“)
145.
5 m
m(5
.73“
)83.3 mm
(3.28“)
100.0 mm(3.58“)
163.
0 m
m(6
.42“
)
Wiring
A.
ENGLISH
Installation Manual
bandg.com
ENGLISH
Installation Manual
bandg.com
ENGLISH
Installation Manual
bandg.com
ENGLISH
Installation Manual
bandg.com
1.
3. 4.
1x card reader slotMicro SD
TM
10.4 to 17.0 V DC< 16.3 W (3 A fuse)
B.
5.
Compliance statementsThe relevant Declaration of conformity is available in the product’s section at:
www.simrad-yachting.com
This product complies with:• CE under RED Directive 2014/53/EU• the requirements of level 2 devices
of the Radio communications (Electromagnetic Compatibility) standard 2017
WarningThe user is cautioned that any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Accessories (sold separately)A. Sun cover
Part no.: 000-15068-001B. Panel mounting kit
Part no.: 000-15071-001
6.
Bracket mounting Panel mounting
3
1
2
4
1 2
4
3
5
Material 10# screw
Soft materials e.g. Plywood Ø 3.7-4.0 mm (5/32”)
Hard materials e.g. Fiberglass, Acrylic, Hardwoods Ø 4.1-4.7 mm (3/16”)
Recommended pilot holes.
See panel mounting template for drilling and cutting details.Panel mounting kit is sold separately.
