Crossing the Impossible · Ryujin™ Plus 1.25 mm 0.0186" 0.0195" 0.0200" 0.0215" 0.0246" 1.0 1.0...

2
CORONARY BALLOON Crossing the Impossible 1.0 mm Designed specifically for CTO

Transcript of Crossing the Impossible · Ryujin™ Plus 1.25 mm 0.0186" 0.0195" 0.0200" 0.0215" 0.0246" 1.0 1.0...

CORONARY BALLOON

Crossing the Impossible

1.0 mmDesigned specifically for CTO

For more information please visit our website at www.OrbusNeich.com or contact us:

#G-70-0088 Rev03

CORPORATE HEADQUARTERS 13th Floor, Harcourt House 39 Gloucester RoadWanchai, Hong KongPhone +852.2802.2288Fax +852.2507.3532

EMEA HEADQUARTERSDrs. W. van Royenstraat 5 3871 AN HoevelakenThe NetherlandsPhone +31.33.254.1150 Toll Free Phone 00800.0254.1150*Fax +31.33.254.1151 Toll Free Fax 00800.0254.1151*

* Belgium, Denmark, France, Germany, Ireland, Netherlands, Norway, Sweden and UK

Radiopaque Markers

Exit Markers

Proximal Shaft with PTFE Coating (1.9F)

Transition ZoneRx Port

Distal Shaft: 2.36F for 1.0 mm

Hub

Catheter Working Lengths (140 cm and 150 cm)

Sapphire II1.0 mm

NIC Nano®

0.85 mmSprinter® Legend

1.25 mmFalcon 1.0 mm

Ryujin™ Plus 1.25 mm

0.0186" 0.0200" 0.0215"0.0195" 0.0246"

1.0

1.0

Pressure atm Ø (mm)

Compliance Chart

NP*

RBP**

24681012141618

* Nominal Pressure. The nominal in vitro device specifications do not take into account any lesion resistance.* * Rated Burst Pressure. Do not exceed RBP.

1.00.910.961.001.041.091.131.171.221.26

Ordering InformationLength (mm)Ø (mm)

140 cm working length

150 cm working length

15

234-R-1015

234-RL-1015

-

-

12

234-R-1010

234-RL-1010

10

234-R-1008

234-RL-1008

8

234-R-1005

234-RL-1005

5

Ultimate Smallest crossing Profile*

Sapphire II and OrbusNeich are Registered Trademarks of OrbusNeich Medical.All data and photos on file. Illustrations are not to be considered as engineering drawings or photos.*Data on file, for 1.0 mm diameter balloons.

© 2018 OrbusNeich Medical. All rights reserved. Not available for sale in the USA.