Cross pinning implants by Mike Tapealava
-
Upload
mike-tapealava -
Category
Technology
-
view
130 -
download
0
Transcript of Cross pinning implants by Mike Tapealava
Mike Tapealava
The Cross Pin System
Official consultants for Bredent Products.
Impulsedent Australia50 Natale RoadBuccan QLD 4207
(07) 3200 303 638
The confirmation gig ready for clinic dispatch.
Used impression copings
Pattern Resin from GC
Confirming the milling model
This model will be sectioned for milling
The solid model
Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorationsBritish Dental Journal 2006;201(9)
Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorations British Dental Journal 2006;201(9)
Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorations British Dental Journal 2006;201(9)
Diagnostic wax up
The silicone matrix
The survey
O degree taper for single units
2 degree taper for bridges
Gervais MJ, Hatzipanagiotis P, Wilson PR. Cross pinning: The philosophy of retrievabilityApplied to fixed, implant- supported prostheses. Australian Dental Journal 2008; 53
The abutment casted with the 0 degree taper.
Confirming the path of insertion.
Single cut tungsten
Cross cut tungsten
The telescopic walls are manually polished.
Diatit-Multidrill with stop.
Facing cutter to shape the
Inside surface of the coping.
4L2.5 Necks 4L1.5 Incisal
Managing retrievable qualities with multi unit implant systems.
Gervais MJ, Hatzipanagiotis P, Wilson PR. Cross pinning: The philosophy of retrievabilityApplied to fixed, implant- supported prostheses. Australian Dental Journal 2008; 53
Chee.W and Jivraj S. Designing abutments for cement retained implant supported restorationsBritish Dental Journal 2006;201(9)
Provisional's constructed by Reza Shahmiri
Official consultants for Bredent Products.
Impulsedent Australia50 Natale RoadBuccan QLD 4207
(07) 3200 303 638
Official consultants for Bredent Products.
Impulsedent Australia50 Natale RoadBuccan QLD 4207
(07) 3200 303 638