CRITICAL INFRASTRUCTURE PROMOTION...Proof of performance CRITICAL INFRASTRUCTURE PROMOTION Until...
Transcript of CRITICAL INFRASTRUCTURE PROMOTION...Proof of performance CRITICAL INFRASTRUCTURE PROMOTION Until...
Proof of performance
CRITICAL INFRASTRUCTURE PROMOTION
Until August 31st, order with these promo codes to receive FREE accessories.
2% of the revenue will go to the WHO Solidarity Response Fund.
VDV II ProWith FREE numbered remotes (158050)
SAVE$94
Promo Code: R158003PROMO
NaviTEK NT ProWith FREE numbered remotes (150050)
SAVE$386
Promo Code: R151006PROMO
SignalTEK NTWith FREE PoE Pro Tester (R158004)
SAVE$595
Promo Code: R156005PROMO
LanXPLORER ProWith FREE PoE Pro Tester (R158004)
SAVE$595
Promo Code: R150001PROMO
For more information please call 973-957-7700 or visit www.idealnetworks.net
© 2020 IDEAL INDUSTRIES NETWORKS LIMITED. All Rights Reserved. IDEAL Networks, SignalTEK, NaviTEK and LanXPLORER are trademarks or registered trademarks of IDEAL INDUSTRIES NETWORKS LIMITED.
Promotion Code Description RRP Promo Price
TRADE156006 SignalTEK CT TRADE-IN - Data Cable Transmission Tester $ 1,654 $ 1,429
TRADE156005 SignalTEK NT TRADE-IN - Data Cable Transmission Tester $ 2,481 $ 2,256
This promotion is valid between May 1st to August 31st 2020 and cannot be used in conjunction with other offers. Terms and conditions apply. SignalTEK trade-in is valid with all wiremappers. The wiremapper must be returned to IDEAL Networks / distribution partner and the serial number provided at time of purchase. Please
quote the trade-in code when purchasing.
Or trade-in ANY wiremapper for a new SignalTEK CT or SignalTEK NT
NaviTEK IEWith FREE Media Converter and GbE Fibre Kit (R151060 and MGKLX2)
SAVE$455
Promo Code: R151010PROMO
SAVE$225
Proof of performance
For more information please call 973-957-7700or visit www.idealnetworks.net
© 2020 IDEAL INDUSTRIES NETWORKS LIMITED. All Rights Reserved. IDEAL Networks, SignalTEK, NaviTEK and LanXPLORER are trademarks or registered trademarks of IDEAL INDUSTRIES NETWORKS LIMITED.
VDV II ProMore than just a wiremapper
• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Distance to fault using TDR• Cable length measurement • Trace cables with compatible amplifier probe• PoE detection with voltage
FREE GIFTNumbered remotes
Use the 12 wiremap remotes to save time and indicate a pass/fail on both ends of the cabling.
SignalTEK NTMore than a qualifier
• Pinpoint cable faults on copper and fibre cabling• Prove performance of the network to
international standards• Simulate network traffic with CCTV, IPTV, VoIP
and web traffic• Network troubleshooting to identify
configuration errors
FREE GIFTPoE Pro Tester
Use the PoE Pro to pinpoint cable faults on copper cabling and discover the maximum power available. With interfaces for Coax, RJ11/12 and RJ45, the PoE Pro will provide PoE pass/fail to IEEE 802.3af/at/bt, testing up to 90W.
NaviTEK NT ProEliminate Network Downtime
• Advanced wiremap using TDR• PoE detection with voltage• VLAN detection and support• Optical power level with pass/fail indication• Port identification using EDP/CDP/LLDP• Create Professional PDF reports for your clients
FREE GIFTNumbered remotes
Use the 12 wiremap remotes to save time and indicate a pass/fail on both ends of the cabling.
NaviTEK IEEliminate Network Downtime
• Pinpoint cable faults on copper and fibre cabling • Easily configure nodes to resolve connectivity
issues • Prevent network failures with the health check
feature • Locate devices using the device blink feature
FREE GIFTMedia converter and GbE fibre kit
The media converter allows a fibre connection at 100Mbps as well as the 1Gbps that the NaviTEK IE fibre port already has. The fibre Gbe kit includes fibre patch cords and an SFP module to connect to a fibre network.
LanXPLORER ProEliminate Network Downtime
• Pinpoint cable faults on copper and fibre cabling• Troubleshoot VOIP devices with QoS and Jitter• Monitor traffic between two devices using in-line
mode• Troubleshoot Wi-Fi with dBm, SNR and other
tools• PoE/PoE+ verification with voltage
FREE GIFTPoE Pro Tester
Use the PoE Pro to pinpoint cable faults on copper cabling and discover the maximum power available. With interfaces for Coax, RJ11/12 and RJ45, the PoE Pro will provide PoE pass/fail to IEEE 802.3af/at/bt, testing up to 90W.
Easy to use data cable testers that check the integrity of copper cables in voice, data and video applications.
www.idealnetworks.net
VDV II SeriesMore than just a wiremapper
DESIGNED FOR:Data cable installers and IT Network Technicians
KEY FEATURES:
• Coax, RJ11/12 and RJ45 interfaces
• Wiremap for miswires, split pairs, shorts and opens
• Cable tracing with compatible probe
• VDV II Plus – all the features of VDV II as well as:
• Larger backlit 2.9” display
• Port blink to visually trace cables
• Cable length
• Distance to open
• Carry case & cables
• VDV II Pro – all the features of the VDV II Plus as well as:
• Distance to open / short (TDR)
• PoE detection with voltage information
• Media service detection
• Ethernet detection with network rate
• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Distance to fault using TDR• Cable length measurement• PoE detection with voltage• Trace cables with compatible amplifier probe
What does the VDV II Pro do?
Wiremap with troubleshooting information
PoE detection with voltage information
Wiremap test (TDR) with length and pass/fail
Display switch speed and duplex information
Digital and analogue tone for cable tracing
PBX Service detection
Prove network performance
Network summary information
Wiremap test (TDR)
Wiremap fault analysis
Simulate actual network traffic
Ping and traceroute
Prove the performance of your cabling and networks by simulating actual network traffic to Gigabit Ethernet standards.
Proof of Performance
SignalTEK NTMore than a qualifier
DESIGNED FOR:Data cable installers and IT Network Technicians
KEY FEATURES:
• RJ45 and fibre interfaces
• Network performance test to IEEE802.3ab
• Wiremap for open, shorts, miswires and split pairs (TDR)
• Simulate load - CCTV/IPTV/VoIP/Web
• PoE/PoE+ verification
• Check switch speed 10/100/1000 Mb/s
• Verify network configuration
• Switch port identification via LLDP/CDP
• Cable tracing with compatible probe
• Optical power indication
• Port blink to visually trace cables
• Identify network connection problems
• Ping local network devices and Internet URL’s
• Generate PDF reports to prove performance
• Send reports with the free IDEAL AnyWARE app
• Pinpoint cable faults on copper and fibre cabling• Prove performance of the network to IEEE standards• Simulate network traffic with CCTV, IPTV, VoIP and web • Network troubleshooting to identify configuration errors• PoE/PoE+ verification with voltage• Create Professional PDF reports for your clients• Send reports anywhere using the IDEAL AnyWARE app
What does the SignalTEK NT do?
VLAN detection & operation
CDP/LLDP/EDP port information
Port & network summary info
Fibre cabling – pass/fail indication
RJ45 wiremap with distance to fault
Real time broadcast network traffic
Replace your cumbersome laptop with an all-in-one cable and network tester that keeps your network running.
Traditional Troubleshootingwith a Laptop
Troubleshooting using aNaviTEK NT Pro
Long login time and boot upAwkward in tight spacesNo RJ45 cable testNo fibre SFP portNo PoE testNo reporting
No login for faster operationEasy to carry with rugged casingRJ45 wiremap with pass/failFibre testing with pass/fail (SM/MM)PoE/PoE+ detectionPDF generation
www.idealnetworks.net
NaviTEK NT ProEliminate network downtime
DESIGNED FOR:IT Managers and Systems Integrators
KEY FEATURES:
• Advanced wiremap for split pairs, opens and shorts (TDR)
• PoE/PoE+ detection
• Tone generator for cable tracing
• Hub blink for port identification
• Switch speed detection - 10/100/1000 Mb/s
• Touchscreen
• Detailed network information
• Port identification using EDP/CDP/LLDP
• VLAN detection and support
• Traffic utilisation bar graph
• Optical power level with pass/fail indication
• Generate test reports (PDF or CSV)
• IDEAL AnyWARE mobile app
• Use the Active Remotes to save time and indicate a pas/fail on both ends of the cabling
Health check to identify issues
Configure network nodes
M12 and RJ45 cable testing
Configure network nodes
Event log – find intermittent issues
Display node details quickly
The only all-in-one Profinet cable and network tester that prevents downtime in Industrial Ethernet networks.
Proof of Performance
NaviTEK IEEliminate network downtime
DESIGNED FOR:Industrial Ethernet IT Managers and Systems Integrators
KEY FEATURES:
• All the features of the NaviTEK NT Pro
• M12 PROFINET Cable Testing
• PROFINET Fibre Cable Testing
• Traffic light network health check
• Device LED flash to locate devices
• NETMAP compare – identify changes
• Configure node settings
• List all network node details
• Reset devices to factory defaults
• Device alarm/error detection
• Industrial Ethernet PDF Reports
• Create professional PDF reports for your clients
• Send reports anywhere using the free IDEAL AnyWARE app
• Pinpoint cable faults on copper and fibre cabling • Easily configure nodes to resolve connectivity issues • Prevent network failures with the health check feature • Locate devices using the device blink feature • Find mis-configured devices using the comparison tool • Find rogue devices using the 48 hour event log• Send reports anywhere using the IDEAL AnyWARE app
What does the NaviTEK IE do?IE
Wi-Fi – resolve Wi-Fi network issues faster
VoIP – monitor data between the phone and network
Cable – wiremap test for open, shorts, miswires and
split pairs
Troubleshooting – monitor network traffic between
two devices
The all-in-one RJ45, fibre and Wi-Fi network tester that prevents network downtime.
www.idealnetworks.net
LanXPLORER ProNetwork Troubleshooter with Bandwidth Monitoring and Performance Diagnostics
DESIGNED FOR:IT Managers and Systems Integrators
LanXPLORER Test ReportJob Name: MyJob
Date Tested: February 9 2016Time Tested: 11:03
Info 1 : Info 2: Info 3: Info 4: Info 5: Info 6: Info 7: Info 8:
Owner: testerCompany: fgAddress 1 : cvAddress 2: vb
City: hkState: tai
Zip: 45tu7Country: rt
Phone #1 : 12356Phone #2: 67890
FAILtest001 0
ESN: 001606-880002
Setup ResultsPortLine RateDuplexIPv4IPv6
Auto RJ45Auto 1000 Mb/sAuto Full DuplexDHCP Assigned 172.20.254.2Disabled
Detected VLAN IDs-
PoE54V
Setup ResultsPoELoad
Pair 1 2-36 Pair 45-78PoEType
Min. Pwr(W) Voltage
(V)Current(mA)
Power(W)
Voltage(V)
Current(mA)
Power(W)PoE 5
54 285 15 0 0 0Ping Destination
AddressPause(ms)
Length(Bytes)
Tx(Frames)
Rx(Frames)
Min RTT(ms)
Avg RTT(ms)
Max RTT(ms)
IPv4 www.google.com 1000 64 0 0 0 0 0www.bbc.com 0 0 0 0 0www.yahoo.com 0 0 0 0 0www.youtube.com 0 0 0 0 0
Netmap ScanAddress
ScanRange
IPv6 HostsFound
172.20.254.2 Class C /24 Enabled 3MAC Address IP Address Name Services00:04:5A:CE:6F:2B The Linksys Group172.020.254.001 http00:16:06:88:13:1E Ideal Industriesfe80::216:6�:fe88:131e -4C:9E:FF:F4:78:7A -fe80::4e9e:��:fef4:787a http
NetVerify
Map HostsFound
testnet 3
Hosts FoundUnchanged Changed New Missing3 0 0 0
MAC Address IP Address Name Services00:04:5A:CE:6F:2B The Linksys Group172.020.254.001 http00:16:06:88:13:1E Ideal Industriesfe80::216:6�:fe88:131e -4C:9E:FF:F4:78:7A -fe80::4e9e:��:fef4:787a http
Conflicts ScanAddress
ScanRange
ConflictsFound0
172.20.254.2 Class C/24
Created: February 10 2016 08:37 Page 12 of 19
KEY FEATURES:
• Monitor PoE power consumption in-line
• List all networks devices
• Identity changes on the network
• VoIP QoS and signal testing (in-line)
• Wi-Fi site survey @2.4/5GHz
• Top 10 bandwidth talkers and listeners
• Discover IP address conflicts
• Traffic statistics - network and devices
• Pinpoint cable faults on copper and fibre cabling• Troubleshoot VOIP devices with QoS and Jitter• Monitor traffic between two devices using in-line mode• Troubleshoot Wi-Fi with dBm, SNR and other tools• PoE/PoE+ verification with voltage• Create Professional PDF reports for your clients• Send reports anywhere using the IDEAL AnyWARE app
What does the LanXPLORER Pro do?
Eliminate guesswork when installing, maintaining and troubleshooting networks where PoE is deployed.
Proof of Performance
PoE ProVerify data cabling and Power over Ethernet
DESIGNED FOR:Anyone installing or maintaining PoE devices and networks
KEY FEATURES:
• All the features of the VDV II Pro
• Validate PoE/PoE+/PoE++ for your device & network
• Supports 802.3bt High Power PoE (up to 90 watts)
• Compatible with most non-standard PoE injectors
• Identifies PSE Type (af/at/bt)
• Identifies PSE Class – 0 to 8
• Determines maximum power available (watts)
• Displays voltage
• Displays which pairs have PoE
• Detects network switch speed up to 1G
• Pinpoint cable faults on copper cabling• Interfaces for Coax, RJ11/12 and RJ45• Provide PoE pass/fail to IEEE 802.3af/at/bt• High power PoE testing up to 90W• Discover the Maximum power available• Detects network switch speed up to 1G
What does the PoE Pro do?
Wiremap test (TDR) with length and pass/fail
Display switch speed up to 1G and duplex information
Type(af/at/bt)
Pin and Polarity
PSE Class
Pass/Fail
PoE Detected
Maximum Power Available (Voltage displayed while test is in progress)
Number of pairs supplying PoE (2Pr or 4Pr)
www.idealnetworks.net
DATA CABLE TESTING NETWORK TESTING INDUSTRIAL
ETHERNET
PoE Pro VDV II SignalTEK NT NaviTEK NT LanXPLORER
Pro NaviTEK IE
By
feat
ures
req
uire
d(C
op
per
cab
le/L
AN
net
wo
rk)
Wiremap testing o o o o o o
Determine distance to fault o Pro o o o o
Tonegenerator o o o o o o
CDP/LLDP/EDP decoding o Plus & Pro o o
Hub blink o Plus & Pro o o o o
Determine cable length o Plus & Pro o o o o
Ping and traceroute test o o o o
PoE service detection o Pro o o o o
PoE load test (up to 90W) o o Plus & Pro o o
Service detection PBX and ISDN o Pro o o o o
Ethernet transmission testing - cable o
Ethernet transmission testing - network o
VoIP diagnostics o
QoS monitoring o
Advanced network troubleshooting o
Network auditing/mapping of IP devices o
PROFINET testing/ troubleshooting o
By
feat
ures
re
qui
red
(F
ibre
cab
le/
LAN
net
wo
rk) PROFINET testing/
troubleshooting o
CDP/LLDP/EDP decoding o Pro o o
Hub blink o Pro o o
Ping and traceroute test o Pro o o
By
feat
ures
req
uire
d
(Tel
eco
m/W
AN
N
etw
ork
)
RFC2544 test, jitter, delay, latency, frame loss, throughput test
Y.1564, NetSAM test
SLA, SLA-Tick & BERT test, traffic generation
Loop back Pro o o
Rep
ort
img PDF Reporting o Plus & Pro o o
IDEAL AnyWARE Cloud / Desktop
IDEAL AnyWARE Mobile App o Plus & Pro o o
SELECTION GUIDE