CRC 711 Molykote 719 WD-40 726 Cable ties 734 Adhesive .... Maintenance and... · Adhesive cable...
Transcript of CRC 711 Molykote 719 WD-40 726 Cable ties 734 Adhesive .... Maintenance and... · Adhesive cable...
CRC 711
Molykote 719
WD-40 726
SKF 726
Hose clips 727
Pipe clips 730
Ball joints 731
Cotter pins and locking pins 733
Cable ties 734
Adhesive cable clips 738
Universal tape 739
Assortmentcases and -boxes 740
Hand lights 741
Test appliances 742
Battery tester 744
Riveting tools 745
Deel_1_.mif Page 709 Monday, July 14, 2014 11:37 AM
Deel_1_-V1C6-TOC.mif Page 710 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
711Maintenance and workshop*CRCCRCCRC
CRC
CRC 5-56
Eliminates moisture, greases and penetrates. Excellent starter help. Prevents rust formation. Non-conducting, does not stain, does not damage plastics, rubber and paint. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 200 ml CRC 40010Spray can 300 ml with 2-spray CRC 40016Spray can 400 ml CRC 40015Can with 5 l CRC 40020Can with 5 ltr + atomizer CRC 40025Can with 20 ltr CRC 40021
CRC WHITE LITHIUM GREASE
White colour simplifies inspection of the locations to be greased. Protects against rust. Contains PTFE for optimum lubrication, even under high loads.
Description Art.no.Spray can 300 ml CRC 40065
CRC COPPER PASTE
Lubricates and protects against seizing and corrosion. Ensures proper tightening of screw connections and precise adjustment of torque to be applied. Suitable for protecting battery poles.
Description Art.no.Tube 100 gr CRC 40070Spray can 300 ml CRC 40080Can with 500 gr CRC 40081
CRC ADHESIVE LUBRICANT
Adheres tightly to all metal surfaces. Retains adhesive properties at high temperatures. Very suitable for chains under heavy loads and chains that move quickly. Penetrates between pin and sleeve. Protects and lubricates steel cables.
Description Art.no.Spray can 500 ml CRC 40100
CRC ZINC SPRAY
Protects iron and steel against corrosion. Forms a strong, flexible and zinc-rich protective layer, which binds to the underlying metal. CRC ZINC is very suitable for refinishing galvanised surfaces after they have been damaged or worked over.
Description Art.no.Spray can 400 ml CRC 40060
CRC SILICONE SPRAY
Forms a clear, lasting and protective film. Lubricates rubbers and plastic. Is water-repellent.
Description Art.no.Spray can 200 ml CRC 40067Spray can 400 ml CRC 40069
aCRC
Deel_1_6.mif Page 711 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p712
CRC COCKPITSPRAY
Gives a shine to dashboards, spoilers, decorative borders and wood. Cleans vinyl, leather and artificial leather. Keeps rubber strips flexible. Protects plastics against discoloration and hardening. Repels dust and water. Does not stick or stain.
Description Art.no.Spray can 400 ml CRC 40066
CRC GASKET REMOVER/PACKING STRIPPER
Helps free up gaskets and glues that have become stuck. Removes hydrocarbon residues, oil, grease and tar from all metal surfaces. Dissolves resins and lubricating agents. Loosens paints and varnishes.
Description Art.no.Spray can 300 ml CRC 40068
CRC EXHAUST TAPE
Repairs the exhaust system without welding or disassembling. Hardens and attaches during ride. Heat-resistant and gastight. Comes with heat shield for covering larger holes and steel wire to keep the bandage in place while forming a bond.
Description Art.no.Box CRC 40140
CRC EXHAUST REPAIR GUM
Repairs holes and cracks in exhaust systems without welding or disassembling. Hardens and attaches during ride. Heat-resistant and gastight.
Description Art.no.Box 200 gr CRC 40141
CRC EXHAUST PIPE MOUNTING PASTE
Makes installation of exhaust systems simpler. Guarantees a perfect seal. Suitable for exhausts with coupling sleeves or flange connectors. Heat-resistant and gastight.
Description Art.no.Tube 150 gr CRC 40142
CRC VIBRA STOP
Prevents and remedies squeaking disc brakes. Forms a water-resistant and temperature-resistant layer
Description Art.no.Bottle 100 ml CRC 40064
CRC BRAKECLEAN
Removes grease from and cleans disc brakes, drum brakes and parts. Leaves no residue. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 500 ml CRC 40030Can with 5 l CRC 40040Can with 20 l. CRC 40050
CRC QUICKLEEN
Quick and powerful cleaner with many applications. Removes grease, oil, stains, dirt, resin and brake fluid.
Description Art.no.Spray can 500 ml CRC 40160Can with 5 l CRC 40161
aCRC
Deel_1_6.mif Page 712 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
713
CRC ELECTRONIC CLEANER
Cleans precision equipment quickly and efficiently. Removes grease, oil, moisture, dust and dirt. Leaves no residue. Harmless for rubbers, paint, plastics and metals. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 200 ml CRC 40110
CRC ANTISEPTIC HANDCLEANER
Cleans the dirtiest hands. Removes dirt, varnish, lubricating agents, ink, grease, oil and adhesive agents. Helps prevent occupational dermatitis. Prevents infection of wounds. Slows growth of bacteria.
Description Art.no.Tube 150 gr CRC 40091Can of 2 kg CRC 40092
CRC HANDCLEANER DISPENSER
Dosing pump for hand cleaner, to be used in combination with a 2 kg tin.
Description Art.no.Dispenser for CRC 40092 CRC 40093
CRC PENETRATING OIL
Loosens dirt, rust and oxidised salts. Also penetrates into spots that are difficult to access. Forms a lubricating film.
Description Art.no.Spray can 300 ml CRC 40094Can with 5 l CRC 40095
CRC ROST FLASH
The product cools down the rust layer to -40ºC which results in it splitting and allowing the penetrating oil to easily infiltrate. This ensures any rusted up parts can easily be separated. Does not contain any silicones or acids and leaves a protective layer.
Description Art.no.Spray can 500 ml CRC 40115
CRC Hand Sprayer
Description Art.no.Hand sprayer CRC 40130
CRC CARBURETTOR CLEANER
Cleans carburettors and fuel systems without the need for disassembly. Dissolves gum and resins. Removes hydrocarbon residues and varnish
Description Art.no.Spray can 300 ml CRC 40280
CRC ANTI-SPATTER
Prevents welding drops from burning into surface and makes it simple to remove them. Protects the welding heads of automatic and semiautomatic welding equipment. Improves the stability of the welding hook.
Description Art.no.Spray can 500 ml CRC 40090
aCRC
Deel_1_6.mif Page 713 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p714
CRC MOTOR STARTER
Cold-start for petrol- and diesel engines. Recommended in cold and damp circumstances.
Description Art.no.Spray can 200 ml CRC 40129
CRC ENGINE DEGREASER
Removes tar, oil and grease. After applying, rinse with water. Protects against corrosion.
Description Art.no.Spray can 500 ml CRC 40165
CRC UPHOLSTERY CLEANER
Foam cleaner. Cleans textile, PVC and leather.
Description Art.no.Spray can 400 ml CRC 40167
CRC GLASS CLEANER
Removes grease, dirt and insects from windshields, headlights, lacquer and bumper bars. Does not affect rubber and lacquer.
Description Art.no.Spray can 400 ml CRC 40168
CRC AIRCO CLEANER
This cleaner thoroughly cleans the system and removes any bacteria and mould. Suitable for vehicles, home and office air conditioning installations. Also has a pleasant smell.
Description Art.no.Spray can 400 ml CRC 40166
CRC KONTAKT 60
Deoxidising spray. Dissolves layers of corrosion, repairs the metal contact.
Description Art.no.Spraycan, 400 ml. CRC 40361
CRC 2-26
Moisture-repellent. Prevents current leakage. Prevents short-circuits and spark transmission. Lubricates moving parts. Loosens dirt and (calcium) deposits and frees parts that have seized up due to rust etc. Improves operational stability in environments with high moisture and salt content. Protects against corrosion. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 200 ml CRC 40200Spray can 500 ml CRC 40210Can with 5 l CRC 40212
CRC LECTRA CLEAN 2
Removes grease and oil, tar, adhesives and dirt from electrical installations, machines, motors and all metal parts. Evaporates quickly and leaves no residue. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 500 ml CRC 40240Can with 5 l CRC 40245
aCRC
Deel_1_6.mif Page 714 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
715
CRC URETHANE ISOLATION
Isolates electrical and electronic components. Keeps out moisture and dirt. Protects print plates, connections and coils against corrosion. Forms a hard, mold-resistant, flexible, shockproof, durable and non-conducting layer. Oil-resistant. Also contains an ultraviolet tracer for efficient quality control of treated surfaces.
Description Art.no.Spray can transparent 300 ml CRC 40260Spray can red 300 ml CRC 40270
CRC MINUS 50
Hairline cracks in PCB tracks become clearly visible after freezing. Cools heat-sensitive components when soldering. Tests correct operation of thermostats and other heat-sensitive components. Helps remove adhesives by freezing them. Makes it easier to fit metal parts together. Evaporates completely and leaves no residue.
Description Art.no.Spray can 200 ml CRC 40275
CRC CONTACT CLEANER
Quickly and safely cleans contacts and sensitive components. Minimises spark formation, contact-to-contact resistance and wear. Evaporates completely and leaves no residue. Improves the operation and reliability of electronic equipment. Harmless for rubbers, paint, plastics and metals.
Description Art.no.Spray can 300 ml CRC 40230
CRC DUST FREE
Blows dust off electronic, photographic and office equipment. Removes dirt, oxide particles and waste particles from sensitive instruments. Prevents incorrect operation, loss of operating time and damage due to microscopic dust in electronic equipment, servo-accessories and precision apparatus.
Description Art.no.Spray can 200 ml CRC 40250
CRC FAST DRY DEGREASER
Quickly penetrates dirt, soot, grease and impurities, resulting in a better functioning of mechanical equipment.
Description Art.no.Spraycan 500 ml. CRC 40169
CRC 3-36
Moisture-repellent. Protects against corrosion. Loosens parts, bolts and nuts that are stuck and/or rusted. Does not damage metals, paint, varnish and most plastics and rubbers. Lengthens the useful life of treated materials. Changeover valve - permits spraying in all positions.
Description Art.no.Spray can 300 ml CRC 40292Spray can 500 ml CRC 40293Spray can 5 l + Sprayer CRC 40295
CRC SUPERCUT
Makes it easier to work hard metals. Lubricates and cools. Does not stain.
Description Art.no.Spray can 300 ml CRC 40285Can with 5 l CRC 40287
aCRC
Deel_1_6.mif Page 715 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p716
CRC LEAKFINDER
Quickly and reliably localises air and gas leaks. Suitable for all gases. Does not stain. Does not damage plastics and metals.
Description Art.no.Spray can 500 ml CRC 40105
CRC SP 350
Forms a non-drying film that is resistant to high moisture concentrations and protects ad lubricates during storage, transport and use. Retains lubricating properties under heavy loads as well.
Description Art.no.Spray can 300 ml CRC 40150
CRC SP 400
Forms a very moisture-resistant film that dries out and protects during storage and transport.
Description Art.no.Spray can 300 ml CRC 40170
CRC BELT GRIP
Prevents slipping of flat, round, and V-belts. Increases the life span of the belt and associated bearings. Reduces noise levels.
Description Art.no.Spray can 300 ml CRC 40125
CRC INOX 200
Protective coating for masking and repairing discolorations (caused by heat) on stainless steel. Ideal touch-up paint for use after welding; discoloured welding seams are covered and protected.
Description Art.no.Spray can 500 ml CRC 40297
CRC Food Grade Silicone
High grade silicone spray, approved for the food-industry. Reduces friction in metal and non-metal applications. Can be used on most types of plastic and rubber. Harmless to most plastics and rubbers.Temperature range -40 to +200 °C USDA-H1 approved. Colour-, taste- and odourless.
Description Art.no.Spray can 400 ml CRC 40350
CRC FOOD GRADE MACHINE OIL
Eliminates moisture, greases and penetrates. Leaves behind a water-repellent protective layer. Does not contain any silicones. Especially suitable for the food industry. In accordance with the NSF H1 standard no. 017048 USDA 1998 H1.
Description Art.no.Spray can 400 ml CRC 40360
CRC RADIATOR LEAKSTOP
Stops leaks in cooling systems. Prevents deposits of calcium and rust. Guarantees a reliable operation of water pump and auto heater. Does not damage metals, plastics, rubber hoses, gaskets and sealing rings. Can be mixed with all types of radiator anti-freeze and cooling water additives. Also suitable for aluminium radiators.
Description Art.no.Bottle 200 ml CRC 40062
aCRC
Deel_1_6.mif Page 716 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
717
CRC RADIATOR CLEANER
Rust, acids, oil and calcium deposits cause blockage in the radiator. This results in overheating and damage to the motor. CRC Radiator Clean contains cleaning components against oxidation and scale. These remove every form of dirt, rust and calcium deposit and guarantee a good heat transfer. Does not damage metal, plastic and rubber. Radiator Clean is sufficient for 12 litre cooling water and can be used in all types of radiators.
Description Art.no.Bottle à 250 ml CRC 40063
CRC OIL ADDITIVE
Stabilises the oil viscosity at a high level and guarantees a very good viscosity at both high and low temperatures. Covers the metal surfaces in the motor with a lubricating film and therefore protects them against corrosion and wear and tear. Prevents the protective components in the oil from losing their efficacy due to oxidation. Prevents contamination of the motor. Also protects against oil forming clots in the motor.
Description Art.no.Bottle à 250 ml CRC 40131
CRC DIESELCLEAN PLUS
Decreases emission of soot. Prevents smoke formation, cleans the fuel system. For good results at the MOT emission test
Description Art.no.Bottle 250 ml, passenger cars CRC 40137Bottle 250 ml, trucks, concentrated CRC 40138
CRC INJECTOR CLEANER
Consists of a well-balanced combination of ingredients that prevent and dissolve deposits. Guarantees a perfect petrol injection, which leads to less fuel consumption as a result of optimum combustion and improved acceleration. Removes residues from valves and pistons and is suitable for petrol motors. Harmless for the catalytic converter.
Description Art.no.Bottle à 250 ml CRC 40134
aCRC
Deel_1_6.mif Page 717 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p718
CRC VALVE CLEANER
Dissolves unburned petrol residues in the carburettor, which prevent the motor from receiving oxygen and removes dirt deposits from the intake valves and the carburettor. Valve cleaner cleans continuously and therefore ensures an optimum energy utilisation. Minimises pollution.
Description Art.no.Bottle à 250 ml CRC 40135
CRC OIL LEAK STOP
Contains active dissolving and swelling agents, which recondition the motor gaskets and prevent oil loss. Also contains ingredients that protect against corrosion and neutralise acids. This prevents material from accumulating and ensures a clean motor. CRC Oil leak stop stabilises the viscosity of warm oil, which reduces the loss via the piston rings. As a result, oil changes can be done less frequently.
Description Art.no.Bottle à 250 ml CRC 40136
aCRC
Deel_1_6.mif Page 718 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
719*MolykoteMolykoteMolykote
Molykote
Molykote BR2 plus
Heavy-duty grease, based on mineral oil and molybdenum sulphide.
Application:Roller bearings, slide bearings, slide guides, slide plates, wheel support arms and wheel guide points, hinge points, threaded spindles, axle-hub connections.
Temperature range: -30 to +130ºC (briefly up to +150ºC)
Description Art.no.Tube 100 g. MKT 19090Cartridge with 400 g MKT 19091Can of 1 kg MKT 19092Can of 25 kg MKT 19093
Molykote Longterm 2 plus
Extreme pressure mineral oil grease containing molybdenum disuplhide.
Application:High loaded bearings, splines and drive couplings in heavy duty vehicles, tractors, cranes, excavators, bull dozers, conveyors and fork-lift trucks.
Service temperature range:-25 to +110ºC, short-term to +130ºC
Description Art.no.Cartridge 400 gr MKT 19095Can 1 kg MKT 19096Can 5 kg MKT 19097
Molykote BG 20
Synthetic complex grease without solid lubricants.
Application:Rolling-element bearings of electrical motors, oven fans, trains, road vehicles, calenders, clutch release bearings.
Service temperature range:-45 to +180ºC, short-term to +200ºC
Description Art.no.Can with 1 kg MKT 50060
Molykote 33 Medium
Silicone grease for high and very low temperatures.
Application:Windscreen wiper motors, electric clocks, control cables, starters, cameras, optical appliances, fan bearings.
Service temperature range:-73 to + 180ºC
Description Art.no.Tube with 100 gr MKT 19085Can with 1 kg MKT 19086
Molykote 44 Medium
Silicone grease for applications subjected to a wide range of temperatures.
Application:Rolling-element bearings in oven fans, driers, conveyors, clutch release bearings, plastic components.
Service temperature range:-40 to +200ºC
Description Art.no.Tube with 100 gr. MKT 50065
Molykote Longterm W2
White heavy duty mineral oil grease containing solid lubricants for applications where cleanliness is of paramount importance.
Application:Bearings in textile and paper processing machines, household appliances and optical instruments, food industry (USDA H2 rating)
Service temperature range:-30 to +110ºC, short-term to +130ºC
Description Art.no.Cartridge 400 gr MKT 19080Can with 1 kg MKT 19081
aMolykote
Deel_1_6.mif Page 719 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p720
Molykote TP 42
White high pressure fittting compound based on synthetic and mineral oils.
Application:Chuck mechanisms, tool guides, shaft/hub connections.
Service temperature range:-25 to +250ºC
Description Art.no.Cartridge 500 gr MKT 50090Can 1 kg. MKT 50092
Molykote Multilub
Universal mineral oil grease without solid lubricants for moderate to high loads.
Application:Rolling element bearings, sliding-contact bearings, sliding guides, linear motion guides, joints, splined shafts, screw spindles.
Service temperature range:-25 to +120ºC
Description Art.no.Tube with 100 gr. MKT 19075Cartridge 400 gr. MKT 19076Can with 1 kg MKT 50070Can 5 kg MKT 50071
Molykote MKL-N
Chain grease with solid lubricants dispersed in solvent.
Application:High speed power transmission chains such as on motorcycles and farm machinery. Precision chains of all sizes in the industry.
Service temperature range:-25 to +160ºC
Description Art.no.Spray can 400 ml MKT 19070
Molykote 1122
Synthetic grease with solid lubricants for chains and open gears.
Steriliser chains, gear drives in furnace and drying systems, sliding contact bearings in dryers and calenders, wire ropes.
Service temperature range:-10 to +160ºC
Description Art.no.Spray can 400 ml MKT 19065
Molykote PG 54
Silicone grease with wide service temperature range containing solid lubricants.
Application:Silent block bushings, video and audio cassettes, water pump packings, control cables, brake components, washing machines.
Service temperature range:-50 to +180ºC
Description Art.no.Can with 1 kg MKT 19061
Molykote PG 65
Synthetic grease with solid lubricants.
Application:Car window mechanism, side window guides, speed axles, ball systems, control- and sealingelements of injection- and compressed air installations.
Service temperature range: -55 to +130ºC
Description Art.no.Can with 1 kg MKT 19060
aMolykote
Deel_1_6.mif Page 720 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
721
Molykote Polygliss-N
Highly adhesive lubricant dispersed in solvent.
Application:General purpose work shop product for various types of chains, slide rails, open gears and other gearings, hinges, seat and sunroof guides, cranks, joints, door tethers, door lock mechanisms and battery poles.
Service temperature range:-20 to +200ºC
Description Art.no.Spray can 400 ml MKT 19055
Molykote DX
White premium fittting compound based on white solid lubricant.
Application:Sliding surfaces, bushings, slide guides and small moving parts.
Service temperature range:-25 to +125ºC
Description Art.no.Tube 50 gr. MKT 50055Can 250 gr. MKT 50056
Molykote G-rapid plus
Assembly paste based on solid lubricant.
Application:Pistons, piston rings, connecting rod and crankshaft bearings, camshafts, lifters, valve guides, rocker arms, keyway profiles, contact pressure devices.
Service temperature range:-35 to +450ºC
Description Art.no.Spray can 400 ml MKT 50050Tube 50 gr MKT 50051Can 250 gr MKT 50052
Molykote P37
Pure thread paste.
Application:
Particularly suitable for stainless steel connections. Metal-free. Suitable for very high temperatures.
Temperature range: -30 to +1400 ºC
Description Art.no.Can 500 gr. MKT 50037
Molykote P74 Super Anti-Seize
Metal-free fitting compound based on synthetic oil and solid lubricants.
Application:Plain bearings, sliding guides, shaft-hub connections, press-fit joints, catalyst screws, door hinges, flanges, leaf springs, chains, brake parts.
Service temperature range:-40 to +200ºC as paste,up to +1500ºC dry lubrication
Description Art.no.Can 500 gr. MKT 50035
Molykote CU 7439 plus (copper paste)
Fitting compound based on solid lubricants.
Application:Parts exposed to high temperatures, high pressures and corrosive influences such as brakes, flange gaskets, exhauster bolts.
Service temperature range:-30 to +300ºC as paste, to +650ºC dry lubrication
Description Art.no.Spray can 300 ml MKT 50040Tube with 100 gr. MKT 50041Can 500 gr. MKT 50042Can 1 kg. MKT 50043
aMolykote
Deel_1_6.mif Page 721 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p722
Molykote Separator spray
Fat-free silicone solvent and lubricant.
Application:Door seals and coatings, door locks, seat and sunroof guides, hinges and connecting rods.
Service temperature range:-40 to +200ºC
Description Art.no.Spray can 500 ml MKT 50030
Molykote D321R
Anti-friction coating (lubricant paint)
Application:Pistons, piston rings, connecting rod and crankshaft bearings, camshafts, valve seats, valve guides, rocker arms, keyway profiles, running in of high loaded gears.
Service temperature range:-180 to +450ºC
Description Art.no.Spray can 400 ml MKT 50027
Molykote Metalcleaner
Cleaner and degreaser.
Application:Brakes, engine parts, gear boxes, chains, electrical contacts and various kinds of metal surfaces.
Description Art.no.Spray can 400 ml MKT 50025
Molykote M55 plus
Solid lubricant dispersion in mineral oil.
Application:Oil-lubricated gear boxes and high-loaded bearings and sliding surfaces, that need proper lubrication for the purposes of reducing wear.
Service temperature range:Depends on lubricating oil resp. gear oil used
Description Art.no.Can 1 ltr. MKT 50015
Molykote 1000
Solid lubricant paste for thread connections exposed to high temperatures.
Application: Ideal for threaded connections exposed to corrosion and which require frequent disassembly and checking.
Temperature range: -30 to +650 ºC
Description Art.no.Can with 1 kg MKT 50072
Molykote Multigliss
Rust removing, moisture displacing, corrosion protective, lubricating metal care.
Application:Threaded spindles, shaft-hub connections, locks, hinges, switching rods, joint couplings, sports equipment, dismantling of press and screw connections.
Service temperature range:-50 to +50ºC
Description Art.no.Spray can 400 ml MKT 50010
aMolykote
Deel_1_6.mif Page 722 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
723
Molykote 111
High viscosity silicone grease.
Application:Valves and plug cocks on pressure equipments, valves of water softeners, food industry, O-rings in telescopes and LPG loading arms.
Service temperature range:-40 to +200ºC
Description Art.no.Tube with 100 gr MKT 19100Can with 1 kg MKT 19101
Molykote 55
Lubricant based on silicone for O-rings.
Application:Dynamic lubrication between rubber and metal parts in compressed air system.
Temperature range: -65 to + 175ºC
Description Art.no.Tube, 100 g MKT 50064Can of 1 kg MKT 50101
Molykote E
Plastislip paste. Suitable for fibreglass-reinforced plastics and plastic threaded connections. Very good load capacity.
Temperature range: -50 to + 130ºC
Description Art.no.Can of 1 kg MKT 50100
Molykote PTFE-N
Air-curing translucent AF coating with extremely low coefficient of friction for areas of low to medium load.
Application:Rubber guides, sliding doors, furniture hinges, small mechanisms in office machines.
Temperature service range:-180 to +240ºC
Description Art.no.Spray can 400 ml MKT 19105
Molykote CLG
Fluid grease.
Service temperature range: -50 to +120°C
Description Art.no.Can 25 kg. MKT 50086
Molykote M30
Liquid lubricant based on solid lubricants in synthetic oil.
Application:Chains, sprockets.
Service temperature range:Oil lubrication: -40ºC to +200ºCDry lubrication: to 450ºC
Description Art.no.Can 5 ltr. MKT 50098
aMolykote
Deel_1_6.mif Page 723 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p724
Molykote Food Grade Spray Oil
Multifunctional mineral oil for the food industry. Odour- and tasteless. In conformity with FDA standard 21 CFR 178.3570 and USDA H1.
Application:Lubrication of mechanical components in the food industry.
Service temperature range:-10 to +120°C
Description Art.no.Spray can 400 ml MKT 19110
Molykote Omnigliss
Grease for universal use, pressure resistant with excellent penetration properties. Water-repellent.
Application:Suitable for friction contacts during low and medium speeds. Used for gears, connections, levers, chains and movable machine parts.
Service temperature range: -30 up to +80ºC
Description Art.no.Spray can 400 ml MKT 50005
Molykote HSC PLUS
Lubricant paste made from mineral oil, solid lubricants and metal powder.
Application:Bolt and thread connections subject to high temperatures. Especially for gas and steam turbines and turbochargers.
Temperature range: -30°C to +1100°C
Description Art.no.Tube with 100 gr MKT 50062
Molykote Dow Corning DC 340
White silicone paste.
Application:When assembling electronic components on a cool body like transistors and thyristors. Ensures a good heat transfer.
Description Art.no.Tube with 100 gr. MKT 50074
Molykote Dow Corning DC 4
White electrical isolation paste.
Application:For a watertight closure of electrical connections, including connections of multiple sockets, battery clamps, cable shoes and ignition systems.
Service temperature range: -55 up to + 200ºC
Description Art.no.Tube with 100 gr. MKT 50045
Molykote 165 LT
Gear grease.
Application: Highly suitable for lubricating open metal gear connections subject to high loads, suitable for peripheral speeds of up to 2.5 m/s.
Temperature range: -25 to +120 ºC
Description Art.no.Can of 1 kg MKT 50099
aMolykote
Deel_1_6.mif Page 724 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
725
Molykote Dow Corning 732 RTV BLACK
Multifunctional single component silicone compound.
Application:Especially for industrial and maintenance applications.
Remains flexible from -50°C to +220°C.
Description Art.no.Tube with 90 gr. MKT 50075
Molykote Dow Corning 732 RTV WHITE
Multifunctional single component silicone compound.
Application:Especially for industrial and maintenance applications.
Remains flexible from -50°C to +220°C.
Description Art.no.Tube with 90 gr. MKT 50076
Molykote Dow Corning Mastic Blue
Ready-to-use single component silicone paste.
Especially developed for industrial applications.
Description Art.no.Tube with 90 gr. MKT 50080
Molykote Dow Corning 7096
Transparent silicon kit.
Application:
Specially for industrial maintenance and repair requirements.
Remains flexible from -50 to +150 ºC
Description Art.no.Cartridge with 310 ml. MKT 50095
aMolykote
Deel_1_6.mif Page 725 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p726
*WD-40WD-40WD-40
SKFSKFSKF Bearing greases
WD-40
WD-40Repels liquids, lubricates and cleans. Protects against corrosion and dissolves rust. Removes glue residue from labels and inhibitor from rims.
Description Packing Art.no.WD-40 250 ml box with 36 pcs WD 40-250MLWD-40 450 ml "Smart Straw" Box with 24 pcs WD 40-450MLWD-40 5 litre jerry can with sprayer WD 40-5LITERWD-40 25 litre jerry can WD 40-25LITER
SKF Bearing greases
SKF SERIES VKG 1 GREASESGood lubrication is very important, as incorrect lubrication causes ca 50% of bearing failures. The grease must be precisely matched to the load, speed, temperature and environment in which the bearing operates.
VKG1 has a temperature range of -30ºc to 140º c and up to even 200º c for periodic use.
Description Packing Art.no.Tube à 200 gr VKG1/0,2Cartridge à 400 gr VKG1/0,4Tin with brush à 500 gr SKF LGAF 3E/05Can à 1 kg VKG1/1Can à 5 kg VKG1/5Barrel à 18 kg VKG1/18
aWD-40 / SKF Bearing greases
Deel_1_6.mif Page 726 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
727Fastening materials
Hose clips
ABA hose clips
For creating a leakproof and reliable connection. Swedish quality - perfection down to the smallest detail, such as:- One-piece construction, without welds or seams.- Edges folded over and smooth inside.- Swedish steel, electrolytic galvanisation.
Size Type Width Packing Art.no.8-14 mm 15 9 mm pack with 10 pcs 23000
11-17 mm 17 9 mm pack with 10 pcs 2300113-20 mm 22 9 mm pack with 10 pcs 2300215-24 mm 25 12 mm pack with 10 pcs 2300319-28 mm 28 12 mm pack with 10 pcs 2300422-32 mm 32 12 mm pack with 10 pcs 2300526-38 mm 40 12 mm pack with 10 pcs 2300632-44 mm 45 12 mm pack with 10 pcs 2300738-50 mm 51 12 mm pack with 10 pcs 2300844-56 mm 56 12 mm pack with 10 pcs 2300950-65 mm 65 12 mm pack with 10 pcs 2301058-75 mm 75 12 mm pack with 10 pcs 2301168-85 mm 85 12 mm pack with 10 pcs 2301277-95 mm 95 12 mm pack with 10 pcs 23013
87-112 mm 112 12 mm pack with 10 pcs 23014104-138 mm 140 12 mm pack with 10 pcs 23015130-165 mm 165 12 mm pack with 10 pcs 23016150-180 mm 180 12 mm pack with 10 pcs 23017175-205 mm 205 12 mm pack with 10 pcs 23018200-231 mm 231 12 mm pack with 10 pcs 23019226-256 mm 260 12 mm pack with 10 pcs 23020251-282 mm 282 12 mm pack with 10 pcs 23021277-307 mm 310 12 mm pack with 10 pcs 23022
ABA hose clips stainless steel
Size Type Width Packing Art.no.15- 24 mm 24 12 mm pack with 10 pcs 2310319- 28 mm 28 12 mm pack with 10 pcs 2310422- 32 mm 32 12 mm pack with 10 pcs 2310526- 38 mm 38 12 mm pack with 10 pcs 2310632- 44 mm 44 12 mm pack with 10 pcs 2310738- 50 mm 50 12 mm pack with 10 pcs 2310844- 56 mm 56 12 mm pack with 10 pcs 2310950- 65 mm 65 12 mm pack with 10 pcs 2311058- 75 mm 75 12 mm pack with 10 pcs 2311168- 85 mm 85 12 mm pack with 10 pcs 2311277- 95 mm 95 12 mm pack with 10 pcs 2311387-112 mm 112 12 mm pack with 10 pcs 23114
104-138 mm 138 12 mm pack with 10 pcs 23115130-165 mm 165 12 mm pack with 10 pcs 23116
150-180 mm 180 12 mm pack with 10 pcs 23117175-205 mm 205 12 mm pack with 10 pcs 23118200-231 mm 231 12 mm pack with 10 pcs 23119226-256 mm 256 12 mm pack with 10 pcs 23120251-282 mm 282 12 mm pack with 10 pcs 23121277-307 mm 307 12 mm pack with 10 pcs 23122
ABA Nova hose clips
Universal clamp for a simple and leakproof connection. Edges folded over and smooth inside edge. Swedish carbon steel.
Size Type Width Packing Art.no.11-17 mm 17 9 mm pack with 50 pcs 2303813-20 mm 20 9 mm pack with 50 pcs 2303915-24 mm 25 9 mm pack with 50 pcs 2304019-28 mm 28 9 mm pack with 50 pcs 2304122-32 mm 32 9 mm pack with 50 pcs 2304226-38 mm 40 9 mm pack with 50 pcs 2304332-44 mm 45 9 mm pack with 50 pcs 2304438-50 mm 51 9 mm pack with 50 pcs 2304544-56 mm 56 9 mm pack with 50 pcs 2304650-65 mm 65 9 mm pack with 50 pcs 2304758-75 mm 75 9 mm pack with 25 pcs 2304868-85 mm 85 9 mm pack with 25 pcs 23049
ABA spring clip
Hose clip with an extra inside ring. The inside ring is very resilient, so that even with large temperature fluctuations a constant pressure is exerted on the hose/pipe and leakage is prevented. Very suitable for silicon hose. Hose clip from high-quality Swedish carbon steel. Inside ring of stainless steel.
Size Type Width Packing Art.no.32 - 44 mm 45 12,2 mm pack with 10 pcs 2303038 - 50 mm 51 12,2 mm pack with 10 pcs 2303144 - 56 mm 56 12,2 mm pack with 10 pcs 2303250 - 65 mm 65 12,2 mm pack with 10 pcs 2303358 - 75 mm 75 12,2 mm pack with 10 pcs 2303468 - 85 mm 85 12,2 mm pack with 10 pcs 2303577 - 95 mm 96 12,2 mm pack with 10 pcs 23036
87 - 112 mm 112 12,2 mm pack with 10 pcs 23037
Size Type Width Packing Art.no.
aHose clips
Deel_1_6.mif Page 727 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p728
ABA mini hose clips
ABA mini hose clips, for small diameters, characteristics:- Edges folded over along the entire border.- One-piece construction, without welds.- M4 bolt with 7 mm hexagonal head.- Swedish SS304 stainless steel
Size Type Width Packing Art.no.6- 8 mm 8 9 mm pack with 50 pcs 232037- 9 mm 9 9 mm pack with 50 pcs 232048-10 mm 10 9 mm pack with 50 pcs 232059-11 mm 11 9 mm pack with 50 pcs 23206
10-12 mm 12 9 mm pack with 50 pcs 2320711-13 mm 13 9 mm pack with 50 pcs 2320812-14 mm 14 9 mm pack with 50 pcs 2320913-15 mm 15 9 mm pack with 50 pcs 2321014-16 mm 16 9 mm pack with 50 pcs 2321115-17 mm 17 9 mm pack with 50 pcs 23212
ABA Robust hose clips
Made from Swedish carbon steel. A heavy, solid clip which exerts a strong but measured clamping force on hoses. The edges of the inner lip below the bolt are curved for extra reinforcement. The bolts and nuts are manufactured from 8.8 steel. All components are galvanised.
Size Width Packaging Art.no.17- 19 mm 18 mm pack of 10 2308021- 23 mm 18 mm pack of 10 2308123- 25 mm 18 mm pack of 10 2308227- 29 mm 18 mm pack of 10 2308329- 31 mm 18 mm pack of 10 2308431- 34 mm 18 mm pack of 10 2308534- 37 mm 18 mm pack of 10 2308637- 40 mm 18 mm pack of 10 2310240- 43 mm 18 mm pack of 10 2308743- 47 mm 20 mm pack of 10 2308847- 51 mm 20 mm pack of 10 2308951- 55 mm 20 mm pack of 10 2309055- 59 mm 20 mm pack of 10 2309159- 63 mm 20 mm pack of 10 2309263- 68 mm 20 mm pack of 10 2309368- 73 mm 20 mm pack of 10 2309473- 79 mm 20 mm pack of 10 2309579- 85 mm 20 mm pack of 10 2309685- 91 mm 20 mm pack of 10 2309791- 97 mm 20 mm pack of 10 2309897-104 mm 20 mm pack of 10 23099
104-111 mm 20 mm pack of 10 23100111-118 mm 20 mm pack of 10 23101125-132 mm 20 mm pack of 10 23402132-139 mm 20 mm pack of 10 23403139-146 mm 20 mm pack of 10 23404153-160 mm 20 mm pack of 10 23405167-174 mm 20 mm pack of 10 23406
174-187 mm 30 mm pack of 10 23407187-200 mm 30 mm pack of 10 23408200-213 mm 30 mm pack of 10 23409213-226 mm 30 mm pack of 10 23410226-239 mm 30 mm pack of 10 23411239-252 mm 30 mm pack of 10 23412
Wall rack hose clips
Wall rack filled with 144 hose clips, 100 mini clips and 1 screwdriver.Size 65 x 15 x 23.4 cm.
Contents:
Hose clips:12 clips 8-14 mm, type 15 (23000)12 clips 11-17 mm, type 17 (23001)12 clips 13-20 mm, type 22 (23002)24 clips 15-24 mm, type 25 (23003)12 clips 19-28 mm, type 28 (23004)12 clips 22-32 mm, type 32 (23005)12 clips 26-38 mm, type 40 (23006)12 clips 32-44 mm, type 45 (23007)12 clips 38-50 mm, type 51 (23008)12 clips 44-56 mm, type 56 (23009)12 clips 50-65 mm, type 65 (23010)
Mini clips:10 mini clips 6- 8 mm, type 8 (23203)10 mini clips 7- 9 mm, type 9 (23204)10 mini clips 8-10 mm, type 10 (23205)10 mini clips 9-11 mm, type 11 (23206)10 mini clips 10-12 mm, type 12 (23207)10 mini clips 11-13 mm, type 13 (23208)10 mini clips 12-14 mm, type 14 (23209)10 mini clips 13-15 mm, type 15 (23210)10 mini clips 14-16 mm, type 16 (23211)10 mini clips 15-17 mm, type 17 (23212)
Screwdriver:1 screwdriver, 250 mm long, SW 7mm(23300)
Description Art.no.Wall rack complete 23310
Size Width Packaging Art.no.
aHose clips
Deel_1_6.mif Page 728 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
729
Assortment case complete
Plastic case filled with 270 hose clips and 1 screwdriver.Size 40 x 27 x 8.5 cm.
Contents:
Hose clips:50 mini clips 8-14 mm, type 15 (23000)50 mini clips 11-17 mm, type 17 (23001)50 clips 13-20 mm, type 22 (23002)25 clips 15-24 mm, type 25 (23003)25 clips 19-28 mm, type 28 (23004)20 clips 22-32 mm, type 32 (23005)15 clips 26-38 mm, type 40 (23006)15 clips 32-44 mm, type 45 (23007)10 clips 38-50 mm, type 51 (23008)10 clips 44-56 mm, type 56 (23009)
Screwdriver:1 screwdriver, 250 mm long, SW 7mm(23300)
Description Art.no.Assortment case complete 23311
Assortment box complete
Box with 500 hose clips and 1 screwdriver. Box is portable and also easy to hang.Size 36 x 17 x 47 cm.
Contents:
Hose clips:75 clips 8-14 mm, type 15 (23000)
100 clips 11-17 mm, type 17 (23001)100 clips 13-20 mm, type 22 (23002)100 clips 15-24 mm, type 25 (23003)
30 clips 19-28 mm, type 28 (23004)25 clips 22-32 mm, type 32 (23005)25 clips 26-38 mm, type 40 (23006)20 clips 32-44 mm, type 45 (23007)15 clips 38-50 mm, type 51 (23008)10 clips 44-56 mm, type 56 (23009)
Screwdriver:1 screwdriver, 250 mm long, SW 7mm(23300)
Description Art.no.Assortment box complete 23312
Flexible screwdriver
Description Art.no.25 cm long. 7 mm hexagon socket. 23300
ABA Dynatool torque socket spanner
Can be adjusted to provide the proper torque. ABA guarantees 10,000 tightening cycles, after which it can be calibrated anew. Plastic handle specially designed to provide a good grip. The recommended torque levels for the 9 and 12 mm. Wide hose clips are listed in a table on the handle. When the chosen torque is reached, a signal is heard.
Length : 265 mmHexagonal : 7 mm
Description Art.no.ABA Dynatool torque socket spanner 23301
aHose clips
Deel_1_6.mif Page 729 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p730
*Pipe clipsPipe clips*Pipe clips
Pipe clips
Pipe clips
Galvanised steel. Oil-resistant rubber. Upper lip has an oval hole (8 x 6.8 mm), which makes installation easier.Bottom lip 6.8 mm Ø hole. Clip width 12.7 mm.
Size Packing Art.no. 5 mm pack with 100 pcs 05705 6 mm pack with 100 pcs 05706 8 mm pack with 100 pcs 05708 10 mm pack with 100 pcs 05710 13 mm pack with 100 pcs 05712 14 mm pack with 100 pcs 05713 16 mm pack with 100 pcs 05715 18 mm pack with 50 pcs 05718 19 mm pack with 50 pcs 05720 22 mm pack with 50 pcs 05722 25 mm pack with 50 pcs 05725 29 mm pack with 50 pcs 05728 30 mm pack with 50 pcs 05730 32 mm pack with 50 pcs 05732 33 mm pack with 50 pcs 05733 35 mm pack with 50 pcs 05735 38 mm pack with 50 pcs 05738 41 mm pack with 50 pcs 05739 45 mm pack with 25 pcs 05740 51 mm pack with 25 pcs 05742 54 mm pack with 25 pcs 05743 60 mm pack with 25 pcs 05744 65 mm pack with 25 pcs 05745 75 mm pack with 25 pcs 05746110 mm pack with 25 pcs 05748
Assortment pipe clips
This box contains a total of 180 clips.
Contents:
40 x 5706 : 6 mm40 x 5708 : 8 mm30 x 5710 : 10 mm30 x 5712 : 13 mm20 x 5715 : 16 mm20 x 5718 : 18 mm
Description Art.no.Assortment pipe clips 05750
Hella Chassis fastener
Chassis fastener for plate thickness 3-6 mm.
Length : 43 mm
Description Packing Art.no.Hella Chassis fastener pack with 100 pcs 8HS 071 414-001
aPipe clips
Deel_1_6.mif Page 730 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
731
Ball joints
Ball joints
Metal. With hexagonal nut and retaining spring. Type AS. DIN 71802.
Size Thread Art.no.M 5 x 0.8 right-hand thread 05605M 6 x 1 right-hand thread 05606M 8 x 1.25 right-hand thread 05608M10x1.5 right-hand thread 05610M12 x 1.75 right-hand thread 05612M14x1.5 right-hand thread 05614M 5 x 0.8 left-hand thread 05625M 6 x 1 left-hand thread 05626M 8 x 1.25 left-hand thread 05628M10x1.5 left-hand thread 05630
Assortment ball joints
Metal. Right-hand thread. This box contains a total of 31 ball joints.
Contents:
10 x 0560510 x 05606 5 x 05608 2 x 05610 2 x 05612 2 x 05614
Description Art.no.Assortment ball joints 05650
aBall joints
Deel_1_6.mif Page 731 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p732
Deel_1_6.mif Page 732 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
733
Cotter pins and locking pins
Cotter pins SINGLE
Size Packing Art.no.2 mm Ø pack with 100 pcs 081023 mm Ø pack with 100 pcs 081034 mm Ø pack with 100 pcs 081045 mm Ø pack with 50 pcs 081056 mm Ø pack with 25 pcs 081067 mm Ø pack with 25 pcs 08107
Cotter pins DOUBLE
Size Packing Art.no.2 mm Ø pack with 100 pcs 082023 mm Ø pack with 50 pcs 082034 mm Ø pack with 25 pcs 082045 mm Ø pack with 25 pcs 082056 mm Ø pack with 20 pcs 082067 mm Ø pack with 10 pcs 08207
ASSORTMENT Cotter pins SINGLE
This box, with a transparent cover, contains a total of 300 single cotter pins.
Contents:100 x 08102100 x 08103 50 x 08104 35 x 08105 10 x 08106 5 x 08107
Description Art.no.Assortment cotter pins single 08150
Locking pins
Description Packing Art.no.4.5 mm Ø pack with 10 pcs 08304 6 mm Ø pack with 10 pcs 08306 8 mm Ø pack with 10 pcs 08308 10 mm Ø pack with 10 pcs 08310 11 mm Ø pack with 10 pcs 08311
aCotter pins and locking pins
Deel_1_6.mif Page 733 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p734
*Cable tiesCable tiesCable ties
Cable ties
Cable ties "INSULOCK" (black)
One-piece construction. Manufactured from durable flexible nylon type 66. Extremely strong and practically indestructible. Can be attached quickly and easily with or without tools.
Black = weather-resistant and heat-resistant up to 105ºC continuous
Length Width Type Packing Art.no. 96 mm 2,6 mm T18R pack with 100 pcs 08650140 mm 3,6 mm T30R pack with 100 pcs 08651146 mm 4,8 mm T50S pack with 100 pcs 08652191 mm 3,6 mm T30L pack with 100 pcs 08653197 mm 4,8 mm T50R pack with 100 pcs 08654266 mm 4,8 mm LK2A pack with 100 pcs 08658300 mm 7,6 mm T120i pack with 100 pcs 08655381 mm 4,8 mm T50L pack with 100 pcs 08657381 mm 7,9 mm T120R pack with 100 pcs 08656540 mm 12,7 mm LK5 pack with 50 pcs 08670
Cable ties "INSULOCK" (transparent)
One-piece construction. Manufactured from durable flexible nylon type 66. Extremely strong and practically indestructible. Can be attached quickly and easily with or without tools.
Transparent = standard
Length Width Type Packing Art.no. 96 mm 2,6 mm T18R pack with 100 pcs 08660140 mm 3,6 mm T30R pack with 100 pcs 08661146 mm 4,8 mm T50S pack with 100 pcs 08662191 mm 3,6 mm T30L pack with 100 pcs 08663197 mm 4,8 mm T50R pack with 100 pcs 08664266 mm 4,8 mm LK2A pack with 100 pcs 08668300 mm 7,6 mm T120i pack with 100 pcs 08665381 mm 4,8 mm T50L pack with 100 pcs 08667381 mm 7,9 mm T120R pack with 100 pcs 08666540 mm 12,7 mm LK5 pack with 25 pcs 08669
Cable ties "INSULOCK
One-piece construction. Made of durable flexible nylon type 66. Extremely strong and practically indestructible. Can be attached quickly and easily with or without tools. Available in several colours.
Length Width Type Packing Art.no.96 mm 2,6 mm T18R red pack with 100 pcs 8020096 mm 2,6 mm T18R yellow pack with 100 pcs 8020196 mm 2,6 mm T18R green pack with 100 pcs 8020296 mm 2,6 mm T18R blue pack with 100 pcs 8020396 mm 2,6 mm T18R grey pack with 100 pcs 80205
197 mm 4,8 mm T50R red pack with 100 pcs 80210197 mm 4,8 mm T50R yellow pack with 100 pcs 80211197 mm 4,8 mm T50R green pack with 100 pcs 80212197 mm 4,8 mm T50R blue pack with 100 pcs 80213197 mm 4,8 mm T50R brown pack with 100 pcs 80216
Cable ties "INTERTRUCK" (black)
One-piece construction. Made of durable flexible nylon type PA66. Extremely strong and practically indestructible. Can be attached quickly and easily with or without tools. Temperature range -40ºC - 105ºC.
Black : UV-resistant
Pulling strength:2.5 to 3.2 mm : 9 kg3.6 mm : 18 kg4.8 mm : 28 kg7.8 mm : 60 kg
12.5 mm : 110 kg
Length Width Packing Art.no.98 mm 2,5 mm pack with 100 pcs 38650
140 mm 3,6 mm pack with 100 pcs 38651160 mm 4,8 mm pack with 100 pcs 38652200 mm 3,6 mm pack with 100 pcs 38653200 mm 4,8 mm pack with 100 pcs 38654290 mm 4,8 mm pack with 100 pcs 38658300 mm 7,8 mm pack with 100 pcs 38655360 mm 4,8 mm pack with 100 pcs 38657365 mm 7,8 mm pack with 100 pcs 38656500 mm 12,5 mm pack with 50 pcs 38659540 mm 7,8 mm pack with 100 pcs 38670
Cable ties "INTERTRUCK" (transparent)
One-piece construction. Made of durable flexible nylon type PA66. Extremely strong and practically indestructible. Can be attached quickly and easily with or without tools. Temperature range -40ºC - 105ºC.
Transparent : standard
Pulling strength:2.5 to 3.2 mm : 9 kg3.6 mm : 18 kg4.8 mm : 28 kg7.6 mm : 60 kg
12.7 mm : 110 kg
Length Width Packing Art.no.98 mm 2,5 mm pack with 100 pcs 38660
140 mm 3,6 mm pack with 100 pcs 38661160 mm 4,8 mm pack with 100 pcs 38662200 mm 3,6 mm pack with 100 pcs 38663200 mm 4,8 mm pack with 100 pcs 38664290 mm 4,8 mm pack with 100 pcs 38668300 mm 7,8 mm pack with 100 pcs 38665360 mm 4,8 mm pack with 100 pcs 38667365 mm 7,8 mm pack with 100 pcs 38666500 mm 12,5 mm pack with 100 pcs 38669
aCable ties
Deel_1_6.mif Page 734 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
735
Tightening tool
Plastic, for tightening cable ties. After tightening, the excess strip end is cut off by turning the tool 90 degrees.
Description Art.no.For cable ties up to 4.8 mm 08640For cable ties from 4.0 to 7.6 mm 08641
Tightening tool MK7
Glassfibre reinforced polyester housing, for tightening cable ties up to 4.8 mm.Adjustable tightening force.
Description Art.no.Tightening tool 08643
Tightening tool MK9
Glassfibre reinforced polyester housing, for tightening cable ties up to 13.5 mm.Adjustable tightening force.
Description Art.no.Tightening tool 08642
Cable ties DH series
Cable tie with a double closing piece, can also connect an extra cable in addition to its normal function. Available in various lengths, colour black.
Length Width Type Packing Art.no.210 mm 4,6 mm T50RDH pack with 500 pcs 80015306 mm 4,6 mm T50IDH pack with 100 pcs 80016
Cable ties RT100/140/250 series
Releasable cable tie, for securing hoses, cables and wires. Available in various lengths, colour black.
Length Width Type Packing Art.no.140 mm 9,0 mm RT140 pack with 100 pcs 80021250 mm 9,0 mm RT250 pack with 100 pcs 80022
Cable ties RLT series
Releasable cable tie. Available in black and transparent.
Length Width Type Packing Art.no.772 mm 8,9 mm RLT150, transparent pack with 50 pcs 80145772 mm 8,9 mm RLT150, black pack with 50 pcs 80135
Cable ties REL series
Releasable cable tie, especially suitable if regular disconnections are likely. Available in various lengths, colour black and transparent.
Length Width Type Packing Art.no.140 mm 7,5 mm REL140, transparent pack with 100 pcs 80140140 mm 7,5 mm REL140, black pack with 100 pcs 80130250 mm 7,5 mm REL250, transparent pack with 100 pcs 80141250 mm 7,5 mm REL250, black pack with 100 pcs 80131
Cable ties RT50RSF series
Releasable cable tie, can be mounted in an 8 mm ø hole. Colour black.
Length Width Type Packing Art.no.215 mm 4,6 mm RT50RSF pack with 100 pcs 80150
aCable ties
Deel_1_6.mif Page 735 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p736
Cable ties T18/T50/REL series
Cable tie with protective edge for dust and dirt, for mounting in a hole. Available in various lengths. Type REL can be removed. Colour black.
Length Width Type Hole ø Packaging Art.no.100 mm 2.5 mm T18RDP5 4.9-5.1 mm pack with 500 pcs 80045165 mm 5.0 mm REL30SDP6 6.3-7.0 mm pack with 500 pcs 80047170 mm 5.10 mm T50SDP6 6.3-7.0 mm pack with 500 pcs 80048
Cable ties with mounting eye
Cable tie with mounting eye. Available in several lengths. Colour transparent or black.
Length Width Type Hole Ø Packing Art.no.110 mm 2,3 mm T18MR tr. 3,3 mm pack with 100 pcs 80010110 mm 2,3 mm T18MR bl. 3,3 mm pack with 100 pcs 80000160 mm 3,5 mm T30MR tr. 4,4 mm pack with 100 pcs 80011160 mm 3,5 mm T30MR bl. 4,4 mm pack with 100 pcs 80001215 mm 4,6 mm T50MR tr. 5,4 mm pack with 100 pcs 80012215 mm 4,6 mm T50MR bl. 5,4 mm pack with 100 pcs 80002400 mm 7,6 mm T120MR tr. 6,4 mm pack with 50 pcs 80013400 mm 7,6 mm T120MR bl. 6,4 mm pack with 50 pcs 80003
Cable ties EdgeClip series
Cable tie equipped with a special clip which can be pushed onto a plate of 1-3 mm thickness. Various types available. The clip can be mounted to either the top or the side of the cable, parallel to the plate or at right angles. Please refer to the description in the text. Available in several lengths. Colour black.
Length Width Type Packing Art.no.200 mm 4,6 mm T50ROSEC4A
EdgeClip 4 right-angledpack with 500 pcs 80057
200 mm 4,6 mm T50ROSEC4BEdgeClip 4 parallel
pack with 500 pcs 80055
150 mm 3,5 mm T30REC4AEdgeClip 4 right-angled
pack with 500 pcs 80058
150 mm 3,5 mm T30REC4BEdgeClip 4 parallel
pack with 500 pcs 80056
200 mm 4,6 mm T50ROSEC5AEdgeClip 5 right-angled
pack with 500 pcs 80061
200 mm 4,6 mm T50ROSEC5BEdgeClip 5 parallel
pack with 500 pcs 80060
Cable ties BHT/CT series
Cable tie with round (Type BHT) or rectangular (Type CT) head. Especially suitable for mounting in metal sheeting and chassis. Can be mounted in a hole ø 8 mm. Available in various lengths. Colour black.
Length Width Type Temp. Packaging Art.no.200 mm 7.6 mm CT203 105ºC max pack with 50 pcs 80068375 mm 7.6 mm CT375 85ºC max pack with 50 pcs 08649
Cable ties Speedy Tie
Releasable and heavy-duty cable tie. Particularly suitable for the temporary mounting of heavy parts, can be loaded up to 88 kg. Colour yellow.
Length Width Type Packing Art.no.750 mm 12 mm SpeedyTie OEM-pack pack with 25 pcs 80080750 mm 12 mm SpeedyTie Dispenser-box 12x5 pcs 80090
Coiled hose SP161
Plastic, available in various colours. With flat spiral. For bundling loose cables. Universally applicable.
Bundle range Type Packing Art.no.1,6 - 8,0 mm SP161 I, transparent roll with 30 m 801605,0 - 20,0 mm SP161 I, transparent roll with 30 m 80161
20,0 - 100,0 mm SP161 I, transparent roll with 30 m 801621,6 - 8,0 mm SP161 II, white roll with 30 m 801655,0 - 20,0 mm SP161 II, white roll with 30 m 80166
20,0 - 100,0 mm SP161 II, white roll with 30 m 801675,0 - 20,0 mm SP161 III, black roll with 30 m 80170
20,0 - 100,0 mm SP161 III, black roll with 30 m 80171
aCable ties
Deel_1_6.mif Page 736 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
737
Coiled hose SPS
Plastic, colour black. With round spiral. For bundling loose cables. Not suitable for bundling larger cables than stated in the first column.
Max. cable diam. ø Type Packing Art.no.10 mm SPS10 1 m 8018015 mm SPS15 1 m 8018120 mm SPS20 1 m 8018225 mm SPS25 1 m 8018330 mm SPS30 1 m 8018435 mm SPS35 1 m 8018540 mm SPS40 1 m 8018650 mm SPS50 1 m 80187
Coiled hose SPF
Plastic, colour black. With flat spiral. For bundling loose cables. Not suitable for bundling larger cables than stated in the first column.
Max. cable diam. ø Type Packing Art.no.10 mm SPF10 1 m 8019015 mm SPF15 1 m 8019120 mm SPF20 1 m 8019225 mm SPF25 1 m 8019330 mm SPF30 1 m 8019435 mm SPF35 1 m 8019540 mm SPF40 1 m 8019650 mm SPF50 1 m 80197
aCable ties
Deel_1_6.mif Page 737 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p738
*Adhesive cable clipsAdhesive cable clipsAdhesive cable clips
Adhesive cable clips
Adhesive cable clips
Galvanised metal, with an acrylic adhesive layer. Excellent adhesion. Type C can be used for guiding cable or pipes; type D is meant to be used for fastening the cable ties.
Description Packing Art.no.Type C, max cable diameter 12 mm Ø pack with 100 pcs 08674Type D, max cable tie width 10 mm pack with 100 pcs 08675
Adhesive cable clips
Plastic, mounting with screws or adhesive type, except 80112 and 80113. Only suited for screw mounting. Available in various versions. Suitable for securing cable ties in place.
Length Width Type Packing Art.no.19 mm 19 mm MB3A transparent pack with 100 pcs 8010619 mm 19 mm MB3A black pack with 100 pcs 8010528 mm 28 mm MB4A transparent pack with 100 pcs 8010720 mm 14 mm TY3G1 transparent pack with 100 pcs 8011220 mm 14 mm TY3G1S transparent pack with 100 pcs 8010920 mm 14 mm TY3G1S black pack with 100 pcs 8010832 mm 25 mm TY8G1 transparent pack with 100 pcs 8011332 mm 25 mm TY8G1S transparent pack with 100 pcs 8011132 mm 25 mm TY8G1S black pack with 100 pcs 80110
Cable clip LKC
Plastic, for mounting with screws. Various models available.
Length Width D Type Packing Art.no.25 mm 17 mm 5 mm Ø LKC, black pack with 100 pcs 8011425 mm 17 mm 5 mm Ø LKC, transparent pack with 100 pcs 8011540 mm 19 mm 6 mm Ø LKCSF1,
transparentpack with 100 pcs 80116
Cable clip KR
Plastic, for mounting with screws. Various models available.
Length Width D Type Packing Art.no.18 mm 12 mm 4,5 mm Ø KR6G5,
transparentpack with 100 pcs 80117
18 mm 12 mm 4,5 mm Ø KR6G5, black pack with 100 pcs 8011825 mm 14,5 mm 6 mm Ø KR8G5,
transparentpack with 100 pcs 80119
Cable clip NY
Plastic, for mounting with screws. Various models available.
Length Width D Type Packing Art.no.13,5 mm 12 mm 3 mm Ø NY3256,
transparentpack with 1000 pcs 80120
Cable clip WPC
Plastic, transparent. Can be mounted in a 4.7 mm ø hole. Releasable, ensuring additional cables can be added at a later stage.
Length Height Type Packing Art.no.15 mm 12,7 mm WPC5 pack with 100 pcs 8010015 mm 17,7 mm WPC10 pack with 500 pcs 8010115 mm 22,7 mm WPC15 pack with 500 pcs 8010215 mm 27,7 mm WPC20 pack with 500 pcs 80103
aAdhesive cable clips
Deel_1_6.mif Page 738 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
739*Universal tapeUniversal tape*Universal tape
Universal tape
Foam tape
Double-sided foam tape, white. With acrylic adhesive layer. For securing various different materials including PVC, glass and metal objects.
Temperature range : -40ºC up to +70ºCMounting temperature : +15ºC and upLength : 50 m or 66 mWidth : 19/25 or 50 mmThickness : 0.8 mm
Description Length Art.no.Foam tape, 19 mm 50 m 19995Foam tape, 25 mm 50 m 19996Foam tape, 50 mm 66 m 19997
Adhesive tape
Polyethylene coated mesh, available in various colours. Rubber adhesive layer. For sealing of joints, fixing of cables, bundling or packaging.
Temperature range : -35 up to + 90 °CLength : 50 mWidth : 50 mmNominal thickness : 0.32 mmStretch (longitudinal) : 20%
Description Length Art.no.Adhesive tape, brown 50 m 19972Adhesive tape, white 50 m 19974Adhesive tape, black 50 m 19973Adhesive tape, grey 50 m 19975Adhesive tape, red 50 m 19976Adhesive tape, green 50 m 19982Adhesive tape, blue 50 m 19983Adhesive tape, yellow 50 m 19984
Aluminium tape
Aluminium foil with acrylic adhesive layer. For sealing of joints of e.g. ventilation and heating pipes. Also suitable to protect electro-magnetic radiation and as a heat reflector.
Temperature range : -40ºC up to +130ºCMounting temperature : +15ºC up to + 30ºCLength : 50 mWidth : 50 mmThickness : 65 mu (micron)
Description Length Art.no.Aluminium tape 50 m 19985
aUniversal tape
Deel_1_6.mif Page 739 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p740
*Assortmentcases and -boxesAssortmentcases and -boxesAssortmentcases and -boxes
Assortmentcases and -boxes
Assortment case
Plastic with transparent cover and various fixed partitions. The size of the compartments can be determined as desired by means of separate partitions. Available in single- or double-sided version.
Description Art.no.Assortment case, single-sided365 x 280 x 60 mm. 24 compartments
05761
Assortment case, double-sided365 x 280 x 120 mm. 48 compartments
05762
aAssortmentcases and -boxes
Deel_1_6.mif Page 740 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
741*Hand lightsHand lightsHand lights - Hella
Hand lights - Intertruck
Hand lights - Hella
Hella 001 974
Hand light with electronic ballast. Handle, cover and hook of blue rubber. Oil and petrol resistant. Provided with 5 meter cable and earthed plug. IP69.
Length : 545 mm
Description Art.no.Hand Light 2XM 001 974-041
Hella 001 974
Hand light with TL-Light 8W, not replacable, with electronic ballast. Hand grip, cover and hook made of blue rubber. Oil and petrol resistant. Provided with 5 meter cable and push-on tab. IP20.
Length : 475 mm
Description Art.no.Hand Light 2XM 001 974-151
Hand lights - Intertruck
LED Hand light
Wireless. With 30 LEDs for bright light. With UV Light function to detect fluorescent dyes which are used to detect leaks. With Multi-positioning head for directional lighting. Including 2 integrated hooks and magnet for handsfree usage. Works with Li-ion battery. Just 5 hours of charging time. Maximum operation time after recharging 6 hours in continuous use. Polycarbonate lens. Rechargeable using supplied 220V adapter or 12V charging cable.
Length : 280 mm
Description Art.no.Hand light 17173Charging cable 12V 17171
LED Hand light
Wireless. With 6 LEDs for bright light. Suitable for outside usage. Settings for low and high power.Torch function of high power. Including integrated hook, belt clip and magnet for handsfree usage. Works with Li-ion battery. Just 2,5 hours of charging time. Maximum operation time after recharging 8 hours in continuous use. Polycarbonate lens. Rechargeable using supplied 220V adapter.
Length : 205 mm
Description Art.no.Hand Light 17175
aHand lights - Hella / Hand lights - Intertruck
Deel_1_6.mif Page 741 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p742
*Test appliancesTest appliancesTest appliances
Test appliances
Test plug 7-pin (for 12V socket)
Suitable for 12 and 24 Volt. Plug fits only 12 Volt socket DIN 72577 Equipped with LED's.
Description Art.no.Test plug complete 22140
Test plug 7-pin with cable (for 12V socket)
Suitable for 12 and 24 Volt. Plug fits only 12 Volt socket DIN 72577. 5 metres cable. Equipped with LED's.
Description Art.no.Test plug complete 22144
Test plug 7-pin (for 24V socket)
Suitable for 12 and 24 Volt. Plug fits only 24 Volt socket ISO 1185, DIN 72579. Equipped with LED's.
Description Art.no.Test plug complete 22141
Test plug 7-pin (for electro coil)
Suitable for 12 and 24 Volt. For testing the electro coil that is fitted with a 24 Volt plug ISO 1185, DIN 72579. Equipped with LED's.
Description Art.no.Test plug complete 22142
Test plug 7-pin with memory button (for 24V socket)
Suitable for 12 and 24 Volt. Plug fits only 24 Volt socket ISO 1185, DIN 72579. Equipped with memory button for brake lights.
Description Art.no.Test plug complete 22141/M
aTest appliances
Deel_1_6.mif Page 742 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
743
Test plug 13-pin
Suitable for 12 and 24 Volt. Plug fits only 12 Volt socket ISO 11446, DIN 72570. Equipped with LED's. With flexible adapter for easily reading the data.
Description Art.no.Test plug complete 22146
Adapter 13-pin test plug
Suitable for use with testunit 22147, which enables the unit to also test systems with Multicon/West sockets and standard 7-pin sockets.
Description Art.no.Adapter 22139
Test plug ABS 24V
Suitable for 24 Volt. Plug fits all ABS sockets ISO 7638. TÜV approved. For testing the functions of the ABS system. Equipped with LED.
Description Art.no.Test plug complete 22341
Test plug 15-pin
Suitable for 24 Volt. Plug fits only 24 Volt socket IS0 12098, DIN 72570. Suitable for vehicles with or without CAN-BUS/electronic control system. With 80cm cable.
Description Art.no.Test plug complete 22342
Test unit CAN-bus
Test unit for vehicles with or without CAN-bus system. Available in 12V or 24V. 12 Volt version with plug 13-pin according to ISO 11446. 24 Volt version with plug 15-pin according to ISO 12098. With 20 m cable.
Description Art.no.Test unit 13-pin 12V 22147Test unit 15-pin 24V 22343
Test unit
Operates on 220 Volt. Suitable for 12 and 24 Volt vehicles. With this test unit, the lighting of a trailer or a semi-trailer can be put on. Protected with a thermal fuse in the 12 and 24 volt system. A fuse is fitted in the 220 volt connection, which also contains a spare fuse.Dimensions: 300 x 250 x 135 mm
Description Art.no.Test unit complete 22143Test unit for LED 22148Fuse 2 A Slow 22145Automatic fuse 6A 22138Automatic fuse 7A 22135
aTest appliances
Deel_1_6.mif Page 743 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p744
Battery testerBattery testerBattery tester
Test unit
Operates on 220 Volt. Suitable for 24V vehicles. Fitted with 7-terminal socket, ISO 1185, and 15-pin socket, ISO 12098.
Testing trailer or semitrailer:Connect the cable to the socket and position the switch of the relevant function to the right.
Testing trucks:Connect the cable to the socket and position the switches to the left. The relevant diode will light up when, for example, the lighting is switched on.
Dimensions: 300 x 250 x 135 mm
Description Art.no.Test unit complete 22149
Hella
Voltage tester 6/12/24V.
Description Art.no.Voltage tester 8PD 003 798-001
Battery tester
Batteries - Midtronics "EXP-1000" Battery tester
Tester for individual batteries of 6/12V and battery sets, also tests starter and charging systems of 12V and 24V. In addition to the simple battery test function, it is also possible to test the functioning of two batteries in series. In this 24V truck application, the balance between the two batteries is indicated. The measurement range is 100-3000 EN/SAE and 100-1000 DIN/IEC. The tester has a 3 m cable.
Description Art.no.Battery tester complete 84200
Batteries - Midtronics "ChargeXpress PRO 25" Battery charger
Charger for 12V batteries with a charge current of 25A and a power rating of 300W. Suitable for 12V lead acid and Ca-Ca batteries, AGM, Spiral and Gel batteries. Supply is 230V-50Hz /16A. Cable length is 3m.
Description Art.no.Battery charger complete 84210
Batteries - Midtronics "ChargeXpress PRO 50-2" Battery charger
Charger for 12V batteries or a set of two 12V batteries with a charge current of 50A and a power rating of 600W. Two batteries can be charged simultaneously in order to avoid an uneven charge between two batteries in series. For this, the batteries must be disconnected from each other. Suitable for 12v lead acid and Ca-Ca batteries, AGM, Spiral and Gel batteries, 24C heavy duty battery set (2x12V) Supply is 230V-50Hz /16A. Equipped with kelvin-charging cables (2x500cm).
Description Art.no.Battery charger complete 84220
aTest appliances / Battery tester
Deel_1_6.mif Page 744 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p
745*Riveting toolsRiveting toolsRiveting tools
Riveting tools
Riveting machine JURID
Riveting machine JURID
Intertruck Benelux can supply all parts of Jurid riveting machines. If you require more information and support in the selection of products, you are invited to contact our sales department.
Pneumatic riveting machine for assembly and disassembly of brake lining.
A number of separate components are also available for older models.
Description Art.no.Riveting machine JU 984000JHose coupling JU 8021006000Locking pin JU 8021010000Connecting plate JU 8022005000Foot pedal OEM equipment JU 8022027000Pressure gauge JU 8022032000Spring-brake JU 8022056000Tension spring JU 8022057000Piston rod JU 8022071000Axle JU 8022072000Connecting plate JU 8022075000
Riveting tools
Set drift punches and rivet headers in sizes 5, 6, 8 and 10 mm.
Description Art.no.Set Riveting tools JU 8025001000
Rivet header
Description Art.no.Rivet header 4 mm JU 8025114000Rivet header 5 mm JU 8025115000Rivet header 6 mm JU 8025116000Rivet header 6.35 mm JU 8025117001Rivet header 8 mm JU 8025118000Rivet header 8 mm JU 8025120000
Rivet feet
Description Art.no.Rivet foot 4 mm JU 8025124000Rivet foot 5 mm JU 8025125000Rivet foot 6 mm JU 8025136000Rivet foot 8 mm JU 8025138000Rivet foot 10 mm JU 8025140000
Distance rings
Description Art.no.Distance ring 5 mm JU 8025155000Distance ring 10 mm JU 8025160000
aRiveting tools
Deel_1_6.mif Page 745 Monday, July 7, 2014 6:07 PM
Mai
nten
ance
and
wor
ksho
p746
Drift punches
Description Art.no.Drift punch 4 mm JU 8025164000Drift punch 5 mm JU 8025165000Drift punch 6 mm JU 8025166000Drift punch 6.35 mm JU 8025163001Drift punch 8 mm JU 8025168000Drift punch 10 mm JU 8025170000
Pressure pedestal
Description Art.no.Pressure pedestal JU 8025199000
Drift punches with interchangeable pin
Description Art.no.Drift punch complete 5 mm JU 8025185000Drift punch complete 6 mm JU 8025186000Drift punch complete 6.35 mm JU 8025180001Drift punch complete 8 mm JU 8025188000Drift punch complete 10 mm JU 8025190000
Tension bolt
Description Art.no.Tension bolt JU 8025188020
Holder
Description Art.no.Holder 5 mm JU 8025185030Holder 6 mm JU 8025186030Holder 6.35 mm JU 8025180003Holder 8 mm JU 8025188030Holder 10 mm JU 8025190030
Pins
Description Art.no.Pin 5 mm JU 8025185010Pin 6 mm JU 8025186010Pin 6.35 mm JU 8025180002Pin 8 mm JU 8025188010Pin 10 mm JU 8025190010
aRiveting tools
Deel_1_6.mif Page 746 Monday, July 7, 2014 6:07 PM