Craniofacial Instrument and Module Systemssynthes.vo.llnwd.net/o16/LLNWMB8/US Mobile/Synthes North...
Click here to load reader
Transcript of Craniofacial Instrument and Module Systemssynthes.vo.llnwd.net/o16/LLNWMB8/US Mobile/Synthes North...
Craniofacial Instrument and ModuleSystems. Complete selection ofinstruments and cases.
Modular system forcomplete selectionof implants andinstruments
Implant modulessupported by a set of universalinstruments
Color-coded modules and instruments
Introduction
Product Information
Table of Contents
Synthes
AO Principles 2
Craniofacial Instrument and Module Systems 3
1.0 mm Module 4
1.3 mm Module 6
1.5 mm Module 8
2.0 mm Module 10
Craniofacial Graphic Cases (690.652 and 690.654) 12
Instrument Insert Trays (for 690.652 and 690.654) 13
Craniofacial Graphic Cases (690.005 and 690.601) 17
Cruciform and PlusDrive Screws 19
2 Synthes Craniofacial Instrument and Module Systems
AO Principles
In 1958, the AO formulated four basic principles which havebecome the guidelines for internal fixation.1
Anatomic reductionThe craniofacial plates are available in a wide variety of shapesand sizes. All plates can be contoured to allow reduction ofcraniofacial fractures.
Stable fixationMultiple screw sizes and a range of plate strengths allow thesurgeon to choose the construct which will provide appropriatestability for a particular fracture.
Preservation of blood supplyCompact plate design minimizes the need to strip the periosteum, thereby maintaining the blood supply to the bone.
Early, active mobilizationPlate and screw features combined with AO technique createan environment for bone healing, facilitating the return tooptimal function.
1. M. E. Müller, M. Allgöwer, R. Schneider, and H. Willenegger. Manual of Internal Fixation, 3rd Edition. Berlin: Springer-Verlag. 1991.
Craniofacial Instrument and Module Systems (690.652 and 690.654)
Synthes 3
FeaturesComplete modularity—choose modules according to your needs:– 1.0 mm, 1.3 mm, 1.5 mm, 2.0 mm
– Mesh
– Orthognathic Plate
– Orthognathic Pre-Bent Plate
– Orthognathic Screw
– Self-Drilling Screw
Two- or four-module craniofacial graphic cases are available: – Two-module (690.652)
– Four-module (690.654)
Implant modules are supported by a set of universal instruments stored in removable trays.
All modules and product labeling are color-coded accordingto screw size for easy identification.1.0 mm = Green1.3 mm = Gold1.5 mm = Red2.0 mm = Blue
Screw length markers are used to customize each module by preferred screw type and lengths: choose self-drilling or self-tapping, length and quantity.
BenefitsHospitals can build a system for specific requirements and easily expand the system as their needs change.
Modules hold a full complement of implants, permitting multiple surgeries without restocking.
Simplifies intraoperative use when combining multiple implant sizes.
Replaces multiple implant systems, thereby reducing hospital inventory.
Note: For additional information, please refer to package insert.For detailed cleaning and sterilization instructions, please refer tohttp://us.synthes.com/Medical+Community /Cleaning+and+Sterilization.htmor to the below listed inserts, which will be included in the shipping container:– Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays
and Graphic Cases—DJ1305– Processing Non-sterile Synthes Implants—DJ1304
1.0 mm Module
Module will hold*:– Drill Bits with stop (12)
– Screwdriver Blades (2)
– Screws (170)
– Emergency Screws (34)
Module, Markers and Labels304.663 1.0 mm Module
304.102W, Screw Length Markers, for self-drilling screws,
304.103W (white, 2 mm –3 mm)
306.663 1.0 mm Screw Length Marker Kit (black, 2 mm –8 mm)
304.663P Label Sheet for 1.0 mm Craniofacial Module
304.700S1 Label Sheet for Maxillofacial Screws
304.700S2 Label Sheet for Maxillofacial Screwdriver Blades
Instruments0.70 mm Drill Bits
316.03 Universal /Hall coupling, 3 mm stop
316.13 Stryker J-latch coupling, 3 mm stop
316.23 Mini quick coupling, 3 mm stop
0.76 mm Drill Bits
316.05 Universal /Hall coupling, 5 mm stop
316.08 Universal /Hall coupling, 8 mm stop
316.014 Universal /Hall coupling, 14 mm stop
316.15 Stryker J-latch coupling, 5 mm stop
316.18 Stryker J-latch coupling, 8 mm stop
316.114 Stryker J-latch coupling, 14 mm stop
316.25 Mini quick coupling, 5 mm stop
316.28 Mini quick coupling, 8 mm stop
316.214 Mini quick coupling, 14 mm stop
4 Synthes Craniofacial Instrument and Module Systems
* Contents not included, must be ordered separately.
Indications
1.0 mm Titanium T-Plates
420.70 5 holes base x 5 holes shaft
420.71 5 holes base x 7 holes shaft
1.0 mm Titanium H-Plates
420.84 3 holes each side x 0 holes bridge
420.85 5 holes each side x 1 hole bridge
1.0 mm Titanium Plates
420.10 Adaption Plate, 100 mm length, 34 holes
420.21 Orbital Rim Plate, 11 holes
420.81 X-Plate, 5 holes
Implants1.0 mm Titanium Mesh Plates
420.00 29 mm x 40 mm, 4.5 mm x 5 mm holespacing, 0.5 mm thickness
420.02 38 mm x 42 mm, 4 mm x 4 mm holespacing, 0.4 mm thickness
420.05 50 mm x 100 mm, 4 mm x 4 mm holespacing, 0.4 mm thickness
420.06 100 mm x 100 mm, 4 mm x 4 mm holespacing, 0.4 mm thickness
420.070 Mesh Screen, 100 mm x 100 mm, 0.1 mm thickness
1.0 mm/1.5 mm Titanium Mesh Plate
420.071 100 mm x 100 mm, 4 mm hole spacing
1.0 mm Titanium Strut Plates
420.01 30 mm length, 16 holes
420.04 42 mm length, 22 holes
1.0 mm Titanium Orbital Mesh Plates◊
420.302 0.2 mm thick
420.303 0.3 mm thick
420.304 0.4 mm thick
1.0 mm Titanium Orbital Floor Plates◊
420.40 Universal
420.401 Anatomic, small
420.402 Anatomic, large
420.403 Anatomic, medium
1.0 mm Titanium Medial Wall Plates◊
420.44 Left
420.45 Right
1.0 mm Titanium L-Plates
420.54 4 holes base x 5 holes shaft, left
420.55 4 holes base x 5 holes shaft, right
1.0 mm Titanium Y-Plates
420.62 2 holes each arm x 5 holes shaft
420.63 3 holes each arm x 7 holes shaft
420.68 Double, 1 hole each arm x 2 holes shaft
Synthes 5
◊ These implants are available nonsterile or sterile-packed. Add “S” to catalog number for sterile product.
1.3 mm Module
Module will hold*:– Drill Bits with stop (12)– Screwdriver Blades (4)– Screws (170)– Emergency Screws (34)
Module, Markers and Labels304.672 1.3 mm Module304.103W– Screw Length Markers, for self-drilling screws,
304.108W (white, 3 mm–8 mm)
306.666 1.3 mm Screw Length Marker Kit (black, 3 mm–6 mm and 8 mm)
304.672P Label Sheet for 1.3 mm Craniofacial Module
304.700S1 Label Sheet for Maxillofacial Screws
304.700S2 Label Sheet for Maxillofacial Screwdriver Blades
Instruments1.0 mm Drill Bits
316.441 Universal /Hall coupling, 4 mm stop
316.442 Universal /Hall coupling, 6 mm stop
316.443 Universal /Hall coupling, 8 mm stop
316.446 Stryker J-latch coupling, 4 mm stop
316.447 Stryker J-latch coupling, 6 mm stop
316.448 Stryker J-latch coupling, 8 mm stop
316.451 Mini quick coupling, 4 mm stop
316.452 Mini quick coupling, 6 mm stop
316.453 Mini quick coupling, 8 mm stop
Implants1.3 mm Titanium Mesh Plates
421.001 38 mm x 53 mm, 5 mm hole spacing
421.006 100 mm x 100 mm, 5 mm hole spacing
421.099 Mesh Screen, 100 mm x 100 mm, 0.2 mm thickness
1.3 mm Titanium Orbital Floor Plates◊
421.040 Universal
421.043 Anatomic, medium
421.048 Anatomic, small
421.049 Anatomic, large
6 Synthes Craniofacial Instrument and Module Systems
Indications
* Contents not included, must be ordered separately.◊ These implants are available nonsterile or sterile-packed.
Add “S” to catalog number for sterile product.
1.3 mm Titanium Box Plates
421.095 13 mm x 8 mm, 4 holes
421.096 13 mm x 13 mm, 4 holes
1.3 mm Titanium Orbital Mesh Plates◊
421.302 0.2 mm thick
421.303 0.3 mm thick
421.304 0.4 mm thick
1.3 mm Titanium Plates
421.010 Adaption Plate, 95 mm length, 24 holes
421.021 Orbital Rim Plate, 9 holes, 35 mm length
421.071 T-Plate, 3 holes base x 4 holes shaft
421.080 Strut Plate, 43 mm length, 18 holes, 5 mm hole spacing
421.081 X-Plate, 4 holes
421.085 H-Plate, 5 holes in each side, 1 hole bridge
Implants continued1.3 mm Titanium Medial Wall Plates
421.044 Left
421.045 Right
1.3 mm Titanium Oblique L-Plates
421.050 3 x 3 holes, left
421.051 3 x 3 holes, right
421.052 3 x 4 holes, left
421.053 3 x 4 holes, right
1.3 mm Titanium Y-Plates
421.061 1 hole each arm x 3 holes shaft
421.067 Double, 1 hole each arm x 2 holes shaft, 22 mm
421.068 Double, 1 hole each arm x 2 holes shaft, 15 mm
421.069 Double, 1 hole each arm x 2 holes shaft, 18 mm
1.3 mm Titanium Contourable Mesh Plates,malleable◊
421.004 38 mm x 45 mm
421.007 100 mm x 100 mm
421.015 30 mm diameter
421.016 70 mm diameter
421.017 100 mm diameter
1.3 mm Titanium Contourable Mesh Plates,rigid◊
421.005 38 mm x 45 mm
421.008 100 mm x 100 mm
421.009 200 mm x 200 mm
421.018 30 mm diameter
421.019 70 mm diameter
421.020 100 mm diameter
Synthes 7
◊ These implants are available nonsterile or sterile-packed. Add “S” to catalog number for sterile product.
1.5 mm Module
Module will hold*:– Drill Bits with stop (16)
– Screwdriver Blades (4)
– Screws (190)
– Emergency Screws (38)
Module304.661 1.5 mm Module
304.104W– Screw Length Markers, for self-drilling screws,304.108W (white, 4 mm–8 mm)
306.661 1.5 mm Screw Length Marker Kit (black, 4 mm–12 mm, 2 mm increments)
304.661.29 Label Sheet for 1.5 mm Craniofacial Module
304.700S1 Label Sheet for Maxillofacial Screws
304.700S2 Label Sheet for Maxillofacial Screwdriver Blades
Instruments1.1 mm Drill Bits
317.04 Universal /Hall coupling, 4 mm stop
317.06 Universal /Hall coupling, 6 mm stop
317.08 Universal /Hall coupling, 8 mm stop
317.12 Universal /Hall coupling, 12 mm stop
317.14 Stryker J-latch coupling, 4 mm stop
317.16 Stryker J-latch coupling, 6 mm stop
317.18 Stryker J-latch coupling, 8 mm stop
317.22 Stryker J-latch coupling, 12 mm stop
317.24 Mini quick coupling, 4 mm stop
317.26 Mini quick coupling, 6 mm stop
317.28 Mini quick coupling, 8 mm stop
317.32 Mini quick coupling, 12 mm stop
Implants1.5 mm Titanium Orbital Rim Plates
446.18 8 holes, 34 mm
446.20 10 holes, 41 mm
446.22 12 holes, 49 mm
446.538 Malleable, 8 holes, 34 mm
446.540 Malleable, 10 holes, 41 mm
446.542 Malleable, 12 holes, 49 mm
8 Synthes Craniofacial Instrument and Module Systems
*Contents not included, must be ordered separately.
Indications
1.5 mm Titanium Contourable Mesh Plates,malleable◊
446.014 38 mm x 45 mm
446.017 100 mm x 100 mm
446.050 30 mm diameter
446.051 70 mm diameter
446.052 100 mm diameter
1.5 mm Titanium Contourable Mesh Plates,rigid◊
446.015 38 mm x 45 mm
446.018 100 mm x 100 mm
446.019 200 mm x 200 mm
446.053 30 mm diameter
446.054 70 mm diameter
446.055 100 mm diameter
1.5 mm Titanium Box Plates
446.096 14 mm x 14 mm, 4 holes
446.097 16 mm x 16 mm, 4 holes
446.916 16 mm x 10 mm, 4 holes
1.5 mm Titanium Adaption Plates
446.10 90 mm length, 20 holes
446.101 Low Profile, 90 mm length, 20 holes
450.101 Malleable, 90 mm length, 20 holes
Implants continued1.5 mm Titanium Oblique L-Plates
446.50 2 x 3 holes, left
446.51 2 x 3 holes, right
446.52 3 x 4 holes, left
446.53 3 x 4 holes, right
1.5 mm Titanium L-Plates, malleable
446.515 2 x 3 holes, right
446.516 2 x 3 holes, left
446.527 3 x 4 holes, left
446.537 3 x 4 holes, right
1.5 mm Titanium Y-Plates
446.61 1 hole each arm x 3 holes shaft
446.611 Low profile, 1 hole each arm x 3 holes shaft
446.614 Double, 1 hole each arm x 2 holes shaft, 18 mm
446.615 Double, 1 hole each arm x 2 holes shaft, 21 mm
450.611 Malleable, 1 hole each arm x 3 holes shaft
1.5 mm Titanium X-Plates
446.81 4 holes
446.811 Low profile, 4 holes
1.5 mm Titanium Orbital Floor Plate◊
446.40 Universal
1.5 mm Titanium Medial Wall Plates◊
446.44 Left
446.45 Right
Synthes 9
◊ These implants are available nonsterile or sterile-packed. Add “S” to catalog number for sterile product.
2.0 mm Module
Module will hold*:– Drill Bits with stop (16)
– Screwdriver Blades (4)
– Screws (140)
– Emergency Screws (56)
Module304.662 2.0 mm Module
304.104W– Screw Length Markers, for self-drilling screws,
304.108W (white, 4 mm–8 mm)
306.662 2.0 mm Screw Length Marker Kit (black, 4 mm–18 mm, 2 mm increments)
304.662.29 Label Sheet for 2.0 mm Craniofacial Module
304.700S1 Label Sheet for Maxillofacial Screws
304.700S2 Label Sheet for Maxillofacial Screwdriver Blades
Instruments1.5 mm Drill Bits
317.54 Universal /Hall coupling, 4 mm stop
317.56 Universal /Hall coupling, 6 mm stop
317.58 Universal /Hall coupling, 8 mm stop
317.62 Universal /Hall coupling, 12 mm stop
317.64 Stryker J-latch coupling, 4 mm stop
317.66 Stryker J-latch coupling, 6 mm stop
317.68 Stryker J-latch coupling, 8 mm stop
317.72 Stryker J-latch coupling, 12 mm stop
317.74 Mini quick coupling, 4 mm stop
317.76 Mini quick coupling, 6 mm stop
317.78 Mini quick coupling, 8 mm stop
317.82 Mini quick coupling, 12 mm stop
10 Synthes Craniofacial Instrument and Module Systems
Indications
*Contents not included, must be ordered separately.
Implants2.0 mm Titanium Oblique L-Plates
447.50 2 x 3 holes, left
447.51 2 x 3 holes, right
447.52 3 x 4 holes, left
447.53 3 x 4 holes, right
447.54 4 x 6 holes, left
447.55 4 x 6 holes, right
2.0 mm Titanium L-Plates, malleable
447.515 2 x 3 holes, right
447.516 2 x 3 holes, left
447.527 3 x 4 holes, left
447.537 3 x 4 holes, right
2.0 mm Titanium Y-Plates
447.61 1 hole each arm x 3 holes shaft
447.62 2 holes each arm x 4 holes shaft
447.630 Malleable, 2 holes each arm x 3 holes shaft(110°)
447.68 Double, 2 holes each arm
447.681 Double, 1 hole each arm x 4 holes shaft, 38 mm
451.611 Malleable, 1 hole each arm x 3 holes shaft
2.0 mm Titanium X-Plate
447.81 4 holes
2.0 mm Titanium H-Plates
447.85 2 holes each arm x 1 hole bridge
447.86 2 holes each arm x 0 hole bridge
2.0 mm Titanium Zygomatic Plates (DCP)
443.44 4 holes, 22 mm length
443.45 5 holes, 27 mm length
443.46 6 holes, 32 mm length
Synthes 11
2.0 mm Titanium Adaption Plates
447.10 100 mm length, 20 holes
447.38 With broad hole spacing, 193 mm length, 30 holes
449.021 Double, 100 mm length, 2 x 20 holes
451.101 Malleable, 100 mm length, 20 holes
2.0 mm Titanium Orbital Rim Plates
447.18 8 holes, 38 mm length
447.20 10 holes, 46 mm length
447.22 12 holes, 53 mm length
Craniofacial Graphic Cases (690.652 and 690.654)
Graphic Cases690.652 Craniofacial Graphic Case, with storage
for two modules
690.654 Craniofacial Graphic Case, with storage for four modules
Sample set configurations for 690.652 and 690.654
Note: Graphic case holds one Basic Craniofacial Insert Trayand two additional insert trays.
– Basic Craniofacial Insert Tray (690.625)
– Craniofacial Supplement Insert Tray (690.651)
– Orthognathic Trocar Insert Tray (690.657)
12 Synthes Craniofacial Instrument and Module Systems
690.652
690.654
Instrument Insert Trays (for 690.652 and 690.654)
Synthes 13
Ratcheting Screwdriver Insert Tray (690.629) This tray is designed to hold:
– Ratcheting Screwdriver Handles (holds 2)
– Ratcheting Screwdriver Handle, one piece (311.023)
– Ratcheting Screwdriver Body (311.014) with Small Handle(311.016) or Large Handle (311.017)
– Holding Sleeve (313.97)
– Screwdriver Blades with hex coupling (2 slots—each slot will hold 2)
– 1.5 mm blades
– 2.0 mm blades
– 2.4 mm blades
Basic Craniofacial Insert Tray (690.625)This tray is designed to hold:
– Plate Cutter (391.98)
– Mesh Cutter (391.952)
– Combination Bending Cutter /Cutting Pliers (391.965)
– Combination Bending Pliers (347.964)
– Screwdriver Handles (311.005), (311.006) (holds 2)
– T-Handle (03.507.000)
– 3.5 mm Threaded Reduction Tool (03.507.003)
– Drill Bits (holds 4)
– Plate Holding Forceps (347.98)
Note: The metal bracket for the T-Handle ships with the instrument tray and must be secured before use.
Note: Unless otherwise noted, trays will hold one of each indicated item.
IMF Screw Compact Insert Tray (690.631) This tray is designed to hold:
– Precut cerclage wire (holds 20)
– 0.5 mm (291.230.98)
– 0.6 mm (291.240.98)
– 1.5 mm Drill Bits, with 12 mm stop (holds 2)
– 2.4 mm/3.0 mm Cruciform Screwdriver Blade, hex coupling (313.939)
– Holding Sleeve (313.97)
– 2.0 mm IMF Screws, self-drilling
– 8 mm (201.928) (holds 15)
– 12 mm (201.932) (holds 15)
Craniofacial Supplement Insert Tray (690.651)This tray is designed to hold:
– Plate Holding Instruments (347.986), (347.987) (holds 2)
OR
– Plate Holding Forceps, locking (399.001)
AND
– Screwdriver Handles (311.005), (311.006) (holds 2)
– Screwdriver Blades (holds 8)
Note: Tray comes preconfigured to hold cruciform and/or PlusDrive blades. Additional brackets are provided for installation of holding sleeve blades.
14 Synthes Craniofacial Instrument and Module Systems
Instrument Insert Trays (for 690.652 and 690.654)
Synthes 15
Orthognathic Trocar Insert Tray (690.657)This tray is designed to hold:– Universal Trocar Handle (397.211)
– 2.0 mm Cheek Retractor Ring (397.43)
– Malleable C-Retractor (397.232)
– 2.0 mm Cheek Retractor Blade (397.42)
– 2.0 mm Cannula and Obturator (397.213)
– 1.5 mm (blue) Drill Guide (397.216)
– Depth Gauge (319.007)
– Standard Drill Bits (holds 3)
– Trocar Drill Bits (holds 3)
Note: Lid and brackets (not shown) can be removed if not needed.
Basic Trocar Insert Tray (690.644) This tray is designed to hold:
– Cheek Retractor Ring (03.506.002)
– 1.5 mm/1.8 mm/2.4 mm Drill Guide (03.506.004)
– 1.5 mm Threaded Drill Guide (312.158)
– 1.5 mm/1.8 mm Insert Drill Guide (312.172)
– 1.8 mm/2.4 mm Threaded Drill Guide (312.173)
– Drill Bits, with Stryker J-latch
– 1.5 mm (312.157)
– 1.8 mm (397.283)
– 2.4 mm (397.284)
– Cannula and Obturator (397.208 )
– Universal Trocar Handle (397.211)
– 2.4 mm Cheek Retractor Blade (397.22)
– Malleable C-Retractor (397.232)
16 Synthes Craniofacial Instrument and Module Systems
Instrument Insert Trays (for 690.652 and 690.654)
Auxiliary Insert Tray (690.638)This tray is designed to function as an auxiliary bin. It is anempty tray with a mat.
Lid, for quarter-size insert trays (690.640)The lid allows individual insert trays to be stored separatelyoutside of the set, while keeping the items in the tray securelycovered. The translucent lid allows contents of the tray to be seen.
Synthes 17
Craniofacial Graphic Cases (690.005 and 690.601)
Graphic Cases690.005 Craniofacial Modular Fixation System
Graphic Case, with storage for 4 modules
690.601 Craniofacial Modular Fixation System Graphic Case, with storage for 2 modules
Instrument Trays (for 690.601 and 690.005)The four chosen implant modules are supported by a set ofuniversal instruments stored in lightweight, removable trays.
Craniofacial Graphic Cases accommodate one full size instrument tray. Order tray and instruments separately.
690.008 Standard Instrument Tray, for CraniofacialModular Fixation System
690.611 Instrument/Trocar Tray, for Modular FixationSystems
690.011S1 Label Sheet for Instrument Trays
304.700S2 Label Sheet for Maxillofacial ScrewdriverBlades
InstrumentsScrewdriver Handles, mini quick coupling
311.03 Small
311.01.98 Large
Screwdriver Handles, hex coupling
311.005 Small
311.006 Medium
Ratcheting Screwdriver and Handles, hex coupling
311.014 Ratcheting Screwdriver Body
311.016 Small Handle, for 311.014
311.017 Large Handle, for 311.014
311.023 Ratcheting Screwdriver Handle
Contents not included, must be ordered separately.For screwdriver blades, see page 19 to 21.
Craniofacial Graphic Cases (690.005 and 690.601)
Instruments continuedPlate Holding Forceps
347.98 For 1.0 mm–2.4 mm plates
348.98 Locking, for 1.0 mm and 1.3 mm plates
399.001 Locking, for 1.5 mm and 2.0 mm plates
Benders and Cutters
329.14 Universal Bending Pliers, for 1.0 mm–2.0 mmplates
347.962 Right Angle Bender, for 1.0 mm–2.0 mmplates
347.964 Combination Bending Pliers, for 1.0 mm–2.0 mm plates
391.965 Combination Bending/Cutting Pliers, for 1.0 mm–2.0 mm plates
391.952 Mesh Cutter, for 1.0 mm–1.3 mm meshplates
391.98 Plate Cutter, for 1.0 mm–2.0 mm plates
Taps, quick coupling
311.15 For 1.5 mm Cortex Screws
311.19 For 2.0 mm Cortex Screws
311.206 For 2.0 mm Coarse Pitch Screws
311.21.98 For 2.0 mm Cortex Screws, long
Taps, hex coupling
311.209 For 2.0 mm Coarse Pitch Screws
311.211 For 2.0 mm Cortex Screws
Drill Bits (Refer to Synthes CMF Catalog for complete listing.)
Trocar SystemsUniversal Trocar System:
397.211 Universal Trocar Handle
397.232 Malleable C-Retractor
(2.0 mm Accessories)
397.213 2.0 mm Cannula and Obturator
397.216 1.5 mm Drill Guide
397.42 2.0 mm Cheek Retractor Blade
397.43 2.0 mm Cheek Retractor Ring
18 Synthes Craniofacial Instrument and Module Systems
Trocar Systems continued(2.4 mm Accessories)
397.212 2.4 mm Cannula and Obturator
397.262 1.8 mm Drill Guide
397.22 2.4 mm Cheek Retractor Blade
397.23 2.4 mm Cheek Retractor Ring
Basic Trocar System:
03.506.002 Cheek Retractor Ring
03.506.003 Cheek Retractor Forceps
03.506.004 1.5 mm/1.8 mm/2.4 mm Drill Guide
312.158 1.5 mm Threaded Drill Guide
312.172 1.5 mm/1.8 mm Insert Drill Guide
312.173 1.8 mm/2.4 mm Threaded Drill Guide
Drill Bits, with Stryker J-latch
312.157 1.5 mm
397.283 1.8 mm
397.284 2.4 mm
397.208 Cannula and Obturator
397.211 Universal Trocar Handle
Cruciform and PlusDrive Screws
Synthes 19
1.0 mm Screws with Cruciform Recess400.502– 1.0 mm Titanium Cortex Screws, self-tapping,400.514 with cruciform recess, 2 mm–12 mm, 14 mm
400.602– 1.2 mm Titanium Emergency Screws, with400.614 cruciform recess, 2 mm–12 mm, 14 mm
1.3 mm Screws with Cruciform Recess400.623– 1.3 mm Titanium Cortex Screws, self-tapping,400.638 with cruciform recess, 3 mm–12 mm, 14 mm,
16 mm, 18 mm
400.653– 1.7 mm Titanium Emergency Screws, with400.668 cruciform recess, 3 mm–12 mm, 14 mm,
16 mm, 18 mm
1.5 mm Screws with Cruciform Recess400.734– 1.5 mm Titanium Cortex Screws, self-tapping,400.748 with cruciform recess, 4 mm–12 mm, 14 mm,
16 mm, 18 mm
400.784– 2.0 mm Titanium Emergency Screws, with400.798 cruciform recess, 4 mm–12 mm, 14 mm,
16 mm, 18 mm
2.0 mm Screws with Cruciform Recess401.154– 2.0 mm Titanium Cortex Screws, self-tapping,401.174 with cruciform recess, 4 mm –12 mm,
14 mm–24 mm (2 mm increments)
401.305– 2.4 mm Titanium Emergency Screws, with401.318 cruciform recess, 5 mm–12 mm, 14 mm,
16 mm, 18 mm
Cruciform Screwdriver Blades, self-retainingHex coupling
313.917 1.3 mm
313.935 1.5 mm/2.0 mm, short
313.936 1.5 mm/2.0 mm, long
313.943 1.5 mm/2.0 mm, medium
Mini quick coupling
313.911 1.0 mm, wedge
313.916 1.3 mm, wedge
313.922 1.5 mm/2.0 mm, wedge, short
313.923 1.5 mm/2.0 mm, wedge, long
313.922
313.916
313.911
20 Synthes Craniofacial Instrument and Module Systems
Cruciform and PlusDrive Screws
1.0 mm PlusDrive Screws400.402– 1.0 mm Titanium Cortex Screws, self-tapping,400.414 with PlusDrive recess, 2 mm–12 mm, 14 mm
400.422, 1.0 mm Titanium Cortex Screws, self-drilling, 400.423 with PlusDrive recess, 2 mm and 3 mm
400.462– 1.2 mm Titanium Emergency Screws, with 400.474 PlusDrive recess, 2 mm–12 mm, 14 mm
1.3 mm PlusDrive Screws400.433– 1.3 mm Titanium Cortex Screws, self-tapping,400.448 with PlusDrive recess, 3 mm–10 mm, 12 mm,
14 mm, 16 mm, 18 mm
400.453– 1.3 mm Titanium Cortex Screws, self-drilling, 400.456 with PlusDrive recess, 3 mm–6 mm
400.483– 1.7 mm Titanium Emergency Screws, with 400.498 PlusDrive recess, 3 mm–10 mm, 12 mm,
14 mm, 16 mm, 18 mm
PlusDrive Screwdriver Blades, self-retainingHex coupling314.485 1.0 mm, 75 mm
313.805 1.3 mm, 52 mm
313.806 1.3 mm, 76 mm
Cruciform Screwdriver Blades with Spring Holding SleeveCompatible with 1.0 mm PlusDrive screws314.481 1.0 mm
314.482 1.0 mm, hex coupling
Compatible with 1.3 mm PlusDrive screws314.413 1.3 mm
314.491 1.3 mm, hex coupling
314.485
313.805
Synthes 21
1.5 mm PlusDrive Screws400.034– 1.5 mm Titanium Cortex Screws, self-tapping,400.048 with PlusDrive recess, 4 mm–8 mm, 10 mm,
12 mm, 14 mm, 16 mm, 18 mm
400.054– 1.5 mm Titanium Cortex Screws, self-drilling, 400.058 with PlusDrive recess, 4 mm–8 mm
400.274– 2.0 mm Titanium Emergency Screws, with 400.288 PlusDrive recess, 4 mm–8 mm, 10 mm,
12 mm, 14 mm, 16 mm, 18 mm
2.0 mm PlusDrive Screws401.041– 2.0 mm Titanium Cortex Screws, self-tapping,401.044 with PlusDrive recess, 4 mm–8 mm
401.045– 2.0 mm Titanium Cortex Screws, coarse pitch,401.052 self-tapping, with PlusDrive recess,
10 mm–24 mm (2 mm increments)
401.061– 2.0 mm Titanium Cortex Screws, self-drilling, 401.065 with PlusDrive recess, 4 mm–8 mm
401.791– 2.4 mm Titanium Emergency Screws, with 401.799 PlusDrive recess, 5 mm, 6 mm–18 mm
(2 mm increments)
PlusDrive Screwdriver Blades, self-retainingHex coupling313.252 1.5 mm/2.0 mm, 96 mm
313.253 1.5 mm/2.0 mm, 76 mm
313.254 1.5 mm/2.0 mm, 52 mm
Cruciform Screwdriver Blades with Spring Holding SleeveCompatible with 1.5 mm PlusDrive screws314.651 1.5 mm, short, hex coupling
314.667 1.5 mm, short
314.668 1.5 mm, long
314.682 1.5 mm, long, hex coupling
Compatible with 2.0 mm PlusDrive screws314.672 2.0 mm, short
314.673 2.0 mm, long
314.675 2.0 mm, short, hex coupling
314.684 2.0 mm, long, hex coupling
313.252
313.253
313.254
Synthes CMF1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056
Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185
© 2007 Synthes, Inc. or its affiliates. All rights reserved. PlusDrive and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 7/10 J6168-B
www.synthes.com