Craig Technologies Corporate Overview

43
craigtechinc.com ctadmc.com BECAUSE IT’S ALL ABOUT THE MISSION ® ENGINEERING | TECHNOLOGY | MANUFACTURING

description

Craig Technologies is a nationwide technology firm that delivers award-winning engineering and technical solutions to both commercial and government clients. Founded in 1999 by CEO, Carol Craig, we are a Woman-Owned, Service-Disabled Veteran-Owned, Minority-Owned, Small Disadvantaged Business that is ISO/AS Certified and ITAR Compliant. We achieve stability through diversity and offer a wide scope of capabilities to include systems engineering; project/program management and analysis; end-to-end engineering, design, prototype, and precision manufacturing; courseware/training products; IT support services; custom software engineering; unmanned vehicles and space systems; and integrated logistics. Our lean management team and industry-leading employee benefits help us deliver exceptional customer-driven solutions at a lower cost. Because It's All About The Mission®

Transcript of Craig Technologies Corporate Overview

Page 1: Craig Technologies Corporate Overview

craigtechinc.comctadmc.com

BECAUSE IT’S ALL ABOUT THE MISSION®

ENGINEERING | TECHNOLOGY | MANUFACTURING

Page 2: Craig Technologies Corporate Overview

c06

Economically Disadvantaged Woman-Owned

Woman-Owned

Service-Disabled Veteran-Owned

Veteran-Owned

Minority-Owned

Small Disadvantaged Business

AS9100C and ISO 9001 Certified

Compliant with NISPOM Guidelines

ITAR Compliant

Government-Approved Financial

Accounting System

The Craig Technologies Difference

2

Our core company values of Family.Integrity.Loyalty.Passion.Community® ensure that every Craig Technologies employee will deliver quality and value in our products and services while listening and actively responding to customer needs.

Page 3: Craig Technologies Corporate Overview

c06

• Software Design and Development• Systems Engineering and Integration• Multidisciplinary Engineering• Training and Courseware Development• Modeling & Simulation• Information Technology Support• Integrated Logistics Support• Research & Development• Program Support

One-Source Solution

3

Engineering | Technical Solutions

• Precision Machining and Fabrication• Specialty Manufacturing• Avionics• Test and Evaluation• Reverse Engineering• Design

Manufacturing/Maintenance, Repair and Overhaul (M/MRO)

Aerospace and Defense Manufacturing Center (ADMC)

Craig Technologies offers a wide portfolio of engineering, technical, design, prototyping and manufacturing services.

Page 4: Craig Technologies Corporate Overview

c06 4

Corporate Culture

• Founded in 1999• Associates present in 21 states• Headquartered in Cape Canaveral, FL• Regional business office in Huntsville, AL

Our Founder/CEO, Carol Craig, uses her engineering and aviation background to provide a unique combination of problem solving and situational awareness to all aspects of the customer process. She stays involved to monitor the progression and success of each project.

Page 5: Craig Technologies Corporate Overview

c06

Nationwide Reach

5

Craig Technologies associates serve a variety of customers nationwide. Our depth and breadth is demonstrated by our geographic, customer and capability diversity.

Headquarters

Corporate Offices

Customer Sites

Kirtland AFB

Cambridge

Patrick AFBHurlburt Field AFBCape Canaveral

Ft. Meade

ArlingtonPatuxent River

SuffolkFt. Eustis

NASA Langley Research Center

NASA Goddard Space Flight Center Manassas

NorfolkFt. KnoxFt. Leavenworth

Ft. Rucker

NASA Marshall Space Flight CenterHuntsville

MechanicsburgNew Cumberland

NASA Ames Research Center

Pittsfield

Davenport

Dobbins AFB

Aberdeen Proving Ground

NASA Kennedy Space CenterCape Canaveral AFS

Louisville

Palo Alto

Hill AFB

Vandenberg AFB

Orlando

Selfridge ANGB

Page 6: Craig Technologies Corporate Overview

c06

• 100% Company-paid Health Care for Employees

• Dental and Vision Family Coverage• Tuition Reimbursement • Employer-matched 401k • Generous Paid Time Off • Dependent Care Insurance • Life Insurance• Long- and Short-term Disability• Accident and Cancer Insurance

• Flexible Spending Account• Financial and Travel Planning Assistance• Emergency Travel Insurance• Legal Aid and Identity Theft Protection• Employee Assistance Program (EAP)• Employer Support of the Guard and Reserve

(ESGR)

6

People First

Craig Technologies has developed a specialized team of employees who are the company’s most valued asset and offers an industry-leading benefits package which includes:

Photo credit: NLMPhotography.com

Page 7: Craig Technologies Corporate Overview

c06 7

Community

• American Cancer Society• American Heart Association• American Red Cross• Arthritis Foundation• Boy Scouts of America• FIRST Robotics• Girl Scouts of America• Habitat for Humanity• Junior Achievement• Meals on Wheels• Rotary International• Sentinels of Freedom• Special Olympics• United Way• Volunteers in Medicine• Wounded Warriors• YMCA

CT Serves is Craig Technologies’ Corporate Community Service Initiative. Craig Technologies is committed to the idea of community and believes that corporate support of civic initiatives is imperative to economic development. Craig Technologies proudly supports:

Page 8: Craig Technologies Corporate Overview

c06 8

Customer BaseUS Navy• US Navy Naval Air Warfare Center Aircraft Division

(NAWCAD)• US Navy Naval Sea Systems Command (NAVSEA)• US Navy Commander Operational Testing & Evaluation

(COMOPTEVFOR)• US Navy Space and Naval Warfare Systems (SPAWAR)• US Navy Naval Air Systems Command (NAVAIR)

US Marines• US Marine Corps College of Continuing Education (CCE)• US Marine Corps Systems Command Program Manager

for Training Systems (PMTRASYS)

US Army• US Army Combined Arms Center - Training (CAC-T)• US Army Mission Command (MCCoE)• US Army Training and Doctrine Command (TRADOC)• US Army Capabilities Integration Center (ARCIC)

US Air Force• US Air Force Space Command (AFSPC)• US Air Force Special Operations Command (AFSOC)• US Air Force Technical Applications Center (AFTAC)• US Air Force Institute of Technology (AFIT)• US Air Force Materiel Command (AFMC)• US Air Force Reserve 94th Airlift Wing, Dobbins AFB

Other Agencies• Department of Transportation (DOT) • Department of Veterans Affairs (VA)

Other DoD• Defense Logistics Agency (DLA)• Defense Information Systems Agency (DISA)• Defense Enterprise Computing Center (DECC) Mechanicsburg• National Guard Bureau

NASA• NASA Ames Research Center• NASA Kennedy Space Center• NASA Langley Space Center• NASA Marshall Space Flight Center• NASA Goddard Space Flight Center

Commercial• ATK• Boeing• Conoco Philips• GE Aviation• Harris• Industrial Lighting Products• Lockheed Martin• Matrix Composites• PaR Systems, Inc.

• Port Canaveral• Siemens Energy• Sierra Nevada Corporation• Space Systems / Loral• SpaceX• Teledyne Brown Engineering• Toshiba• Vencore

Page 9: Craig Technologies Corporate Overview

c06 9

Quality Team and Processes

ISO9001:2008 | AS9100 Rev. C

FM583352Manufacture and assembly

of precision machined components

FM583353Provision of full life-cycle

systems development

Customer Approvals and Certifications

*NADCAP Accreditation in progress

Page 10: Craig Technologies Corporate Overview

c06

Full Lifecycle Integration

10

Craig Technologies supports your projects from concept to real-world application or any scalable solution in-between.

We provide technical services, analysis, and business support for projects large and small.

We engineer, validate, and integrate software systems to match the capability of custom hardware platforms.

We manufacture, maintain, repair and overhaul to extend the life of mission-critical systems.

We design, prototype, manufacture, and perform final acceptance testing for a wide variety of avionics and electromechanical systems and components.

REQUIREMENTS DEFINITION

AGILE ENGINEERING

M/MRO VERIFICATION & TESTING

Page 11: Craig Technologies Corporate Overview

c06

Responsive Development

11

Craig Technologies actively listens and responds to our customers needs to help develop solutions with the lowest cost and highest quality.

Our customers are involved at every step of development to ensure the end product effectively meets user requirements. High-level customer goals are defined in the planning process and are used as inputs to refine the set of requirements. Our agile development process results in a very “active” project with a great amount of feedback and interaction between our development team and end-user communities.

REQUIREMENTS DEFINITION

AGILE ENGINEERING

M/MRO VERIFICATION & TESTING

Page 12: Craig Technologies Corporate Overview

c06

• Software Design and Development• Systems Engineering and Integration• Multidisciplinary Engineering• Training and Courseware Development• Modeling & Simulation• Information Technology Support• Integrated Logistics Support• Research & Development• Program Support

Engineering and Technical Solutions

12

Craig Technologies achieves stability through diversity and offers a wide scope of award-winning engineering and technical solutions.

Page 13: Craig Technologies Corporate Overview

c06

Software Design and Development

13

Craig Technologies offers full System Lifecycle development utilizing best practices. We employ an agile software development process allowing us to rapidly produce customized solutions upon any platform utilizing any language.

• Client/Server Application Development• Mobile Application Development• Web Development• Enterprise Portal Development• Data Architecture Services

(pat. pend.) is a cutting-edge software tool for business development pipeline and capture management.

More than a CRM tool, individual opportunities are selected for pursuit and tracked using a user-friendly interface to facilitate the capture management process with timelines and tasking.

ProDash™ also provides a comprehensive executive management dashboard with financial snapshots for existing business, contract status reports, and value of the opportunity pipeline in one centralized location.

Page 14: Craig Technologies Corporate Overview

c06

• Requirements Development and Traceability

• Model Based Data (MBD) Control• Integrated Verification and Validation• Integrated Project and Risk Management• Life Cycle Analysis and Management

Systems Engineering and Integration

14

Craig Technologies defines quality objectives and product requirements as appropriate for any new products, processes, or projects requested by our customers.

Page 15: Craig Technologies Corporate Overview

c06

Craig Technologies takes care to provide a horizontally-integrated approach to all projects and programs by applying a wide-range of engineering disciplines. Our team of experts help us to meet complex requests with a customer-centric and value-added process.

• Electrical/Mechanical Engineering

• Fluids and Propulsion• Design Engineering• Systems Engineering and

Integration• Design for Life Cycle Cost and

Manufacturing• Technical Analysis and

Investigation• Rapid Prototyping and

Development Test

Multidisciplinary Engineering

15

Page 16: Craig Technologies Corporate Overview

c06

• Integrate Simulation, Modeling and Gaming into training materials

• Conduct computer application design and development

• Provide instructor led/collaborative training

• Integrate Sharable Content Object Reference Model (SCORM) conformant Interactive Multimedia Instruction (IMI) into Learning Management Systems (LMS)

• Develop applications and learning materials that are 508 compliant and meet the technical standards of the proponent.

16

Training and Courseware Development

ROTC eBooks Demo at http://vimeo.com/73945792

Craig Technologies’ team of Instructional System Designers and Training Specialists develop all levels of instructional media.

Page 17: Craig Technologies Corporate Overview

c06

• Operational Applications • Testing & Evaluation (lessons learned,

processes, procedures and applications) • Scenario & Process Evaluation • What If & Impact Analysis • Validation of Operational Processes &

Procedures• Training Application Development• Rapid 3D Modeling & Animation

Generation • Rapid Courseware / Training Prototyping

Modeling & Simulation

17

Craig Technologies’ team of engineers can conceptually capture the requirements, and model the parameters in a platform neutral environment and integrate them with other systems in support of acquisition / procurement strategy and training.

Page 18: Craig Technologies Corporate Overview

c06

• Operating System/ Platform Support – Windows– Linux– Unix– Sharepoint– SQL Server– Oracle– DB2– Informix

• Legacy Data Migration

• Legacy Application Support and Development

• Information Assurance (IA) Engineering Support & Architecture Design

• Desktop Support and Implementation• IT Infrastructure Review • Centralized IT Help/Service Desk,

Network & Data Center Operations • Operation and Maintenance of Distance

Learning Systems • Network Administration • Mobile Application Development

18

Information Technology Support

Craig Technologies provides Information Technology system support to a diverse customer base. We meet the technological demands with a mastery of security protocols, infrastructure expertise, and network support allowing our customers to operate in a secure and agile environment.

Page 19: Craig Technologies Corporate Overview

c06

• Design Interface• Maintenance Planning• Supply Support• Manpower and Personnel• Training and Training Devices• Technical Data• Computer Resources Support• Support and Test Equipment• Facilities• Packaging, Handling, Storage, and

Transportation

19

Integrated Logistics Support

Craig Technologies provides an integrated management and technical life cycle process to include supportability and logistic support considerations so that all elements of logistic support are planned, acquired, tested, and provided in a timely and cost-effective manner.

Page 20: Craig Technologies Corporate Overview

c06 20

Research and Development

Craig Technologies develops prototype solutions to customer problems within the aerospace, energy, aviation and manufacturing industries. Our diverse focus areas drive innovation in the areas of design engineering, software development and process automation to eliminate repetitive processes within the product life cycle.

• Advanced Life Support• Cryogenics• Polymer Science• Surface Systems

Page 21: Craig Technologies Corporate Overview

c06

• Configuration and Data System Management (CM/DM)• Quality Management Systems (QMS)• Occupational and Environmental Safety Management • Hazard Analysis• Systems and Reliability Analysis• Earned Value Management System (EVMS)• R&D/Prototype development• Lab support• Hardware Installation and Maintenance

21

Program Support

Craig Technologies provides dedicated and comprehensive program management support and contract oversight through the entire technical life cycle process.

Page 22: Craig Technologies Corporate Overview

c06

Lifecycle within a Lifecycle

22

Craig Technologies supports your mission-critical hardware from concept to operations with repair, manufacturing, overhaul, and test capabilities.

Craig Technologies’ consolidated design-to-production capability provides a quick and cost-effective solution to any priority need by supporting multiple product lines under one roof at our 161,000 sq. ft. facility in Cape Canaveral, FL. Our team is supported by an inventory of over 2,000 pieces of manufacturing, test and specialty laboratory equipment.

REQUIREMENTS DEFINITION

AGILE ENGINEERING

M/MRO VERIFICATION & TESTING

Page 23: Craig Technologies Corporate Overview

c06

Complete Value Stream

23

Craig Technologies can support your needs whether you require an individual capability or an integrated system solution.

AVIONICS

PRECISION

MACHINING ASSEMBL

Y AND TESTING

INSPECTION

SPECIALTY MFG

NDT AND EVALUATI

ON

DESIGN ENGINEE

RING

• M/MRO• NEW PRODUCT ENTRY

• REVERSE ENGINEERING

• CONTRACT MANUFACTURING

Page 24: Craig Technologies Corporate Overview

c06

Aerospace & Defense Manufacturing Center (ADMC)

24

Precision Machining and Fabrication• CNC Turning and Milling• CNC Sheet Metal Fabrication• EDM Wire and Sinker Machining• Waterjet Cutting• Welding and Brazing

Specialty Manufacturing• CNC Tube Bending• Composites• Hydraulic and Pneumatic Systems• Corrosion Control

Avionics• Cable and Harness Fabrication• Digital and Analog Electronics Testing• Antenna and Transmitter

Characterization• Control Panel Fabrication and

Assembly

Test and Evaluation• Non-destructive Evaluation (NDE)• CMM, VCMM Quality Inspection• Materials and Process Evaluation• Class 100,000 Clean Room Assembly

and Testing• Environmental Testing

Reverse Engineering• Test and Evaluation (Destructive and

Non-destructive)• Modeling• Remanufacture• Acceptance Testing

Design• Requirements Development• Proof of Concept• Prototype Development• Test Planning• Acceptance Testing

>> ALL UNDER ONE ROOF <<

Page 25: Craig Technologies Corporate Overview

c06 25

Precision Machining and Fabrication

• Automatic Tube Welding (Astro Arc) • Tungsten-Inert Gas (TIG) Welding (Automated and Manual)• Resistance Welding (Spot) • Plasma Arc Cutting • Shield Metal Arc Welding (SMAW) • Metal Inert Gas (MIG) Welding• Induction Brazing (Manual and Vacuum Bell Jar)• Painting and Alodine (Chem Film) Treatment

(MIL-C-5541)• Salt Fog Test

• 3D Modeling Printer (10”x10”x12”)• 80x WaterJet Cutting (180”x90”)• 6-Axis CNC Lathe (24” swing x 72”)• 5-Axis CNC Mill (13”x13”x13”)• EDM Wire and Sinker (24”x24”x18”)• Manual Mills, Lathes

Precision Machining

Welding, Brazing and Corrosion Control

Craig Technologies can machine a wide selection of materials from hardened metals such as Inconel® and titanium to processing of composites from Kevlar® and fiberglass, using the latest in CNC equipment and SOLIDWORKS, Mastercam, and GibbsCAM® software.

Page 26: Craig Technologies Corporate Overview

c06

Satellite Parts - Fabrication of complex and satellite transmission devices requires the use of multiple high tolerance CNC tools:

• EDM Wire• EDM Plunge• 5-Axis Vertical Milling• Multi-Axis Turning• CMM Inspection• Laser marking• Chemical Conversion Coatings• High Emissivity Primer

Project Highlight

26

Page 27: Craig Technologies Corporate Overview

c06

Gaseous Nitrogen Purge Quick Disconnects - Fabrication and assembly of nitrogen purge disconnects requires the use of multiple disciplines:

• CNC Machining• Complex Component Assembly• CMM FAI Inspection • Chemical Conversion Coatings• Anodizing• Electron beam welding• Precision cleaning

Project Highlight

27

www.nasaspaceflight.com

www.wiredforspace.com

Page 28: Craig Technologies Corporate Overview

c06

T-0 Frangible Bolts (Flight Hardware) - Fabrication requires the use of multiple disciplines:

• CNC Machining• NDE (Dye Penetrant)• Tensile Testing• Anodizing• CMM FAI Inspection

Project Highlight

28

• Fracture Critical Certified

Page 29: Craig Technologies Corporate Overview

c06 29

Specialty Manufacturing

Oven and Furnace

• Material ranging from 1/8” to 3”

• CNC Hydraulic and Manual Benders

• Infrared Vector Scanner

• High Pressure Hydrostatic Testing

• Titanium Tube Autofrettage Treating to 20,000 psi

• Three-Axis CNC Bender

• Automatic Tube Welding (Astro Arc)

• Autoclave 5’ x 9’ Chamber, 650F, 29.9” Hg Vacuum to 125 psi

• Grieve Oven72” x 72” x 117” - operating to 1250F

• Lunaire Vacuum Oven48” H x 48” W x 48” D +300o F Operating Temperature at x10-5 Torr Vacuum

• Tenney Programmable Oven (Located in Class 100,000 Clean Room) 24” H x 28” W x 40” D -240 to +195o Fahrenheit Operating Temperature

Craig Technologies has the ability to design and fabricate tubes to your specifications or CAD 3D Models for cryogenics, hydraulics and high pressure systems.

We can manufacture various composite structures, and stress relieve materials to meet your industry needs and specifications.

Tube Fabrication

Page 30: Craig Technologies Corporate Overview

c06

High Pressure Fluid Control Panels - Fabrication of multiple media pneumatic/hydraulic fluid distributions systems requires the use of multiple disciplines:

• AWS Welding• CNC Machining• CNC Tube Bending• Component Assembly• Chemical Conversion Coatings

Project Highlight

30

Page 31: Craig Technologies Corporate Overview

c06 31

Avionics

Temperature and Humidity Controls: Avionics Lab environment is controlled through the use of steam injectors to maintain temperature and humidity at 72 degrees and between 40%-60% RH

Battery Backup Power (Uninterruptible Power System): UPS Power supplies steady voltages to test equipment to prevent damage to hardware under test in the event that commercial power is lost

Craig Technologies’ electronics M/MRO Avionics Lab has the environmental controls in place to keep your system or end item safe during every phase of incoming inspection, test, tear down and repair.

Our team is fully capable of completing the most stringent qualification or acceptance test procedure.

Page 32: Craig Technologies Corporate Overview

c06 32

Wire Harness Manufacture and Test

Types of Harnesses: HO (power), ML (data), and RF (semi rigid)

Connectors: General purpose, rectangular, high density, miniature, power, commercial, coax (TNC, SMA, HN and Tri-axial)

Terminations: Stripping (thermal and mechanical), soldering (NASA STD – 8739.4, NHB 5300 and MIL-STD 454), crimping, butt and parallel splices up to 2/0 AWG

Contacts & Terminals: From 32 AWG up to 4/0 AWG, flag terminals up to 4/0 AWG

Mechanical: -500 to +25,000 lbs for pull test requirements to certify/verify good crimps/splices (performed on test samples)

Testing: DC Hipot (manual to 3000 Volts Direct Current (VDC) and automatic to 1500VDC), Alternating Current (AC) dielectric (manual to 3000 VAC), continuity (manual and automatic). Automatic testing is performed on DIT-MCO 9503-12B analyzer.

Chemical Mix Crib: OSHA approved laboratory vent hoods, two multiple ovens for elevated temperature chemical cures, and a deaeration station for performing certified processes such as conformal coating, staking, bonding, potting, etc.

Page 33: Craig Technologies Corporate Overview

c06 33

Project Highlights

Space Craft Wire Harnesses- Fabrication of variable configurations to include flight developmental and Ground Support Equipment (GSE) cable:

• Terminations• Molding• Potting• Testing

Page 34: Craig Technologies Corporate Overview

c06

• Real time radiography• Computed Tomography• Boroscope Inspection • Dye Penetrant• Magnetic Particle• Ultrasonic and Eddy Current

34

Test & Evaluation

• Non-contact Video Coordinate Measurement Devices

• Optical Comparators• Mass Spectrometer Leak Detection: Five

stations for helium trace gas measurement.• Multiple CMM systems up to 86” x 46” x 36”

Advanced Non-Destructive Evaluation (NDE)

Inspection

Page 35: Craig Technologies Corporate Overview

c06

Vibration Testing: Two independent Vibration stations rated to 6,000 lbs force

Thermal Testing: Multiple thermal test stations including the ability to enclose the vibration station in a thermal test chamber for full environmental testing

High Pressure Test Cell: Capability to perform static pneumatic proof pressure testing up to 10,000 psi. The cell is contained within blast walls for safety

RF Shielded Room: Used to isolate the Unit Under Test (UUT) from any stray RF signals generated by local television (TV) stations, radio transmissions, etc. to ensure these signals are not interfering with the UUT circuitry during testing/evaluation

Anechoic Chamber: Frequency Range – 1.8 GHz to 40 GHz (S, C, X, and Ku)

35

Test & Evaluation

Page 36: Craig Technologies Corporate Overview

c06 36

Test & Evaluation

Inorganic materials: Viscosity, nonvolatile residue (NVR), specific gravity, and acidity

Metallurgy: Optical microscopy, detailed hardness testing, and non-destructive testing using Dye/Fluorescent Penetrant Inspection (FPI), X-ray radiography and ultrasonic inspection techniques

Corrosion parameters: Salt Fog test, analyzing heat treated materials

Craig Technologies performs materials-related evaluations and assists in failure analysis of hardware. The M&P Laboratory has the capability to evaluate chemical, physical, and mechanical properties of materials, as well as perform shelf life and acceptance testing of the various materials used in manufacture and repair.

Page 37: Craig Technologies Corporate Overview

c06 37

Test & Evaluation

Clean Room and Clean Work Area Capabilities: 100,000 class Clean Room, certified to Federal Standard 209

Physical chemistry of paints and chemicals: Fourier Transform Infrared (FTIR) Spectrophotometer (with microscope), Ultraviolet (UV) visible spectrophotometer 

Electrical testing: Resistivity chamber, Hipotronics Model No. D125/S meter, and other industry standard electrical current measuring meters

Instron Materials Testing: Machines capable of testing tension, compression, flexure, peel, shear and friction used for material qualification testing and for force vs. deflection testing on hardware details (variable compression with maximum of 45,000 pounds)

Page 38: Craig Technologies Corporate Overview

c06 38

Project Highlights

Antenna characterization testing – Utilized anechoic chamber for developmental omni-directional and medium gain spacecraft and ground antenna:

• S-band characterization for beam shape and gain• Transmit: 2200-2290 MHz / Receive: 2025 - 2210 MHz  • Complete test report with setup, data and calibration information

Page 39: Craig Technologies Corporate Overview

c06

Reverse Engineering and Analysis

39

MATERIALS AND

PROCESSING (M&P)

CROSS-REFERENCE

NON-DESTRUCTIV

E EVALUATION (NDE) LAB

DESIGN TEAM

GEOMETRIC DIMENSIONIN

G AND TOLERANCES APPLICATION

SUBMIT ENGINEERING PACKAGE

TO CUSTOMER

SUBMIT PACKAGE TO

MFG.

Identify material, temper, finish

Known/suspected application materials

Analyze hidden features and

material properties

Incorporate data and scanned model; Note observations,

suggestions and improvement

areas for future parts

Ensure proper form, fit and

function

Approval Create replacement part;

Inspection and quality control

DELIVER PART TO CUSTOM

ER

RECEIVE OBSOLETE OR DMS PART

YES

NO

We address obsolete platforms and Diminishing Manufacturing Sources and

Material Shortages (DMSMS) with component MRO, reverse engineering, and

fabrication of hard-to-find parts.

Page 40: Craig Technologies Corporate Overview

c06

Project Highlight

40

Electronic Switches • Test, disassemble and evaluate (TD&E)• RF Board reverse engineering and

replacement

Receiver Matrix• Reverse engineer and new build• TD&E

Rotary Joint • Disassemble and Evaluate• Reverse engineer test fixture for

acceptance

Matrix Assembly• Test, disassemble and evaluate (TD&E)• RF Board reverse engineering and

replacement

Photo: US Army

Page 41: Craig Technologies Corporate Overview

c06

2014 NASA’s Kennedy Space Center Small Business Subcontractor of the Year2013 NASA's Shared Services Center Small Business Subcontractor of the Year for providing

comprehensive support services to the NASA Enterprise Applications Competency Center (NEACC)

2013 NASA Silver Achievement Award for employee support to Kennedy Space Center FY 2013 Space Technology Center Innovation Fund (CIF) Researchers and Technology Team

2013 & 2011 Best Companies to Work For, Florida Trend Magazine2012 & 2010 Top Simulation & Training Company, Military Training Technology Magazine 2012 NASA Agency Honor Awards for outstanding employee significant, specific achievement 2012 SMART Award in IT Category, Association for Corporate Growth Orlando2011 NASA Silver Snoopy Award for outstanding employee supporting International Space Station

(ISS) Program2010 NASA’s Kennedy Space Center Honor Awards for exemplary employee performance of the

Constellation Ground Systems Board and Panel management and initiative 2010 NASA Customer Service Award presented to employee nominated by the Executive Director

of NASA Headquarters Operations for exceptional customer service 2010 Alfred P. Sloan Award for Business Excellence in Workplace Flexibility in the greater

Washington, DC and Melbourne, FL communities

41

Award-Winning Services

Page 42: Craig Technologies Corporate Overview

c06

Craig Technologies offers:

• High-end, low-cost, solutions • Quality processes with a lean six sigma focus• Proven and solid management combined

with best practices• Stability through diversity • National reach with local community

involvement• High retention rates with industry-leading

benefits

Innovative Approaches + Focused Oversight = Exceptional Results

42

BECAUSE IT’S ALL ABOUT THE MISSION®

BIG ENOUGH TO SUCCEED, SMALL ENOUGH TO CARE.

BIG ENOUGH TO SUCCEED, SMALL ENOUGH TO CARE.

Page 43: Craig Technologies Corporate Overview

[email protected]

@CraigTechInc

Craig Technologies

Craig Technologies

CraigTechVideos

CraigTechInc

craigtechinc.com

Rev. 04/15