CR8-CAMERA POLE...• Category 2.5 terrain in accordance with AS1170.2 Wind Loads to AS/NZS 4600:...
2
“Creating automated security solutions” Unit 9/17 Rivergate Place, Murarrie, Qld 4172 P 07 3390 5050 F 07 3390 5405 E [email protected] W createsecurity.com.au CR8-CAMERA POLE Create Security can supply aesthetically pleasing camera poles and brackets for security cameras, security lighting and other applications requiring external support. Our octagonal columns are manufactured using mild steel ranging in wall thickness from 2-10mm, all poles are seamed/fillet after folding and then Hot Dip Galvanised to finish. Designed to reduce pole movement due to high winds, Creates camera poles and mounting posts are manufactured to Australian standards and are ideal for all types of external camera mountings. OPTIONS: • Flanged base mounted c/w Rag bolts • Powder coated finish • Poles and brackets can be made to order based on your specific design • Camera fittings to suit most applications • Cantilever units • 4mm deflection in 46m/s wind category • All sizes from 3.0m-8.0m • Installation available One Camera Fit-out Two Camera Fit-out Four Camera Fit-out
Transcript of CR8-CAMERA POLE...• Category 2.5 terrain in accordance with AS1170.2 Wind Loads to AS/NZS 4600:...
-
“Creating automated security solutions”Unit 9/17 Rivergate Place, Murarrie, Qld 4172 P 07 3390 5050 F 07 3390 5405 E [email protected] W createsecurity.com.au
CR8-CAMERA POLECreate Security can supply aesthetically pleasing camera poles and brackets for security cameras, security lighting and other applications requiring external support.
Our octagonal columns are manufactured using mild steel ranging in wall thickness from 2-10mm, all poles are seamed/fillet after folding and then Hot Dip Galvanised to finish.
Designed to reduce pole movement due to high winds, Creates camera poles and mounting posts are manufactured to Australian standards and are ideal for all types of external camera mountings.
OPTIONS:
• Flangedbasemountedc/wRagbolts
• Powdercoatedfinish
• Polesandbracketscanbemadetoorderbasedonyourspecificdesign
• Camerafittingstosuitmostapplications
• Cantileverunits
• 4mmdeflectionin46m/swindcategory
• Allsizesfrom3.0m-8.0m
• Installationavailable
One Camera Fit-out
Two Camera Fit-out
Four Camera Fit-out
-
“Creating automated security solutions”Unit 9/17 Rivergate Place, Murarrie, Qld 4172 P 07 3390 5050 F 07 3390 5405 E [email protected] W createsecurity.com.au
CR8-CAMERA POLE
SPECIFICATIONSStandard Design Data of a standard camera poles:
• ColumnHeight:3-6mFlangeMounted
• Location-BrisbaneAustraliaRegion“B”asperAS/NZS1170.2
• TerrainCategory:2.5-Mzcat0.87@5m(interpolated)asperAS/NZS1170.2
• Returnperiod:100years=V100
• CalculatedSiteWindSpeed(Vsit)=41.76m/sasperAS/NZS1170.2
• Standarddesigndeflectionatthetopofthecolumn=12mm
• Category2.5terraininaccordancewithAS1170.2WindLoadstoAS/NZS4600:1996
–Cold-formedsteelstructuresdesignstandard,AS/NZS4676:2000
–Structuraldesignrequirementsforutilityservicespoles,AS/NZS4680:1999
–HotDipGalvanized(Zinc)CoatingsonFabricatedFerrousArticles,
–QualityAssurance:camerapostsaremanufacturedunderISO9001
