CPU Maximum Operating Temps
-
Upload
api-3774955 -
Category
Documents
-
view
763 -
download
0
description
Transcript of CPU Maximum Operating Temps
From http://www.gen-x-pc.com/cputemps.htm
CPU Maximum Operating Temps
The temperatures specified for AMD CPUs max case surface temperatures. These CPUsdo not have an internal diode to measure CPU temperature. The accuracy of the CPUtemperature measurement depends on the motherboard; therefore, it is possible that theCPU overheats even though the CPU temperature reported by the motherboard is belowthe specified maximal temperature. AMD Athlon XP
Processor Specifications Model Number Operating Frequency (MHz) NominalVoltage Max Die Temperature
1500+ 1333 1.75V 90 Degrees Celsius
1600+ 1400 1.75V 90 Degrees Celsius
1700+ 1467 1.75V 90 Degrees Celsius
1800+ 1533 1.75V 90 Degrees Celsius
1900+ 1600 1.75V 90 Degrees Celsius
2000+ 1667 1.75V 90 Degrees Celsius
2100+ 1733 1.75V 90 Degrees Celsius
Athlon 64
3400+Athlon 64
3500+Athlon 64 FX-
53Athlon 64
3800+Temperature, Idle,C 40 38 38 41
Temperature, Burn,C 60 58 60 64
Athlon 64 X2
Model Clock speed L2 cache K Process Temp °CAthlon 64 X2 4800+ 2400 2х 1024 90 nm 65°CAthlon 64 X2 4600+ 2400 2х 512 90 nm 65°CAthlon 64 X2 4400+ 2200 2х 1024 90 nm 65°CAthlon 64 X2 4200+ 2200 2х 512 90 nm 65°CAthlon 64 X2 3800+ 2000 2х 512 90 nm 65°C
CPU Critical Temperature
AMD Athlon Series AMD Athlon (socket) up to 1Ghz 90°CAMD Athlon (slot) all speeds 70°CAMD Athlon Thunderbird 1.1Ghz+ 95°C
AMD Athlon MP 1.33Ghz+ 95°CAMD Athlon XP 1.33Ghz+ 90°CAMD Athlon XP T-Bred up to 2100+ 90°CAMD Athlon XP T-Bred over 2100+ 85°CAMD Athlon XP Barton 85°C
AMD Duron Series AMD Duron up to 1Ghz 90°CAMD Duron 1Ghz+ 90°CAMD Duron Applebred 85°C
AMD K6 Series AMD K6/K6-2/K6-III (All except below) 70°CAMD K6-2/K6-III (model number ending in X) 65°CAMD K6-2+/K6-III+ 85°C
Intel Pentium III Series Pentium III Slot 1 500-866Mhz 80°CPentium III Slot and socket 933Mhz 75°CPentium III Slot 1 1Ghz 60-70°C depending on modelPentium III Slot 1 1.13Ghz 62°C
Intel Celeron Series Intel Celeron 266-433Mhz 85°CIntel Celeron 466-533Mhz 70°CIntel Celeron 566-600Mhz (Coppermine) 90°CIntel Celeron 633-667Mhz 82°CIntel Celeron 700Mhz+ 80°C
Intel Pentium II Pentium II 1st Generation 72-75°CPentium II 2nd Generation 266-333 65°CPentium II 350-400Mhz 75°CPentium II 450Mhz 70°C
Thermal Information Intel® Pentium III™ Processors Max recommended fan inlet temperature is measured at 0.3 inches above the centerof the fan inlet area (the fan center has a circular hologram). This is an ambient airspecification. Pentium® 4 Processor Temperatures
ProcessorCoreFrequency(GHz)
ProcessorPackage
MaximumCaseTemperature(oC)
MaximumRecommendedFan InletTemperature(oC)
ProcessorThermalDesignPower (W)
*Notes
1.30 423-pin OOI 69 40 48.9 1, 3, 51.30 423-pin OOI 70 40 51.6 1, 3, 61.40 423-pin OOI 70 40 51.8 1, 3, 51.40 423-pin OOI 72 40 54.7 1, 3, 6
1.40 478-pin FC-PGA 72 40 55.3 2, 4, 6
1.40 478-pin FC-PGA 72 40 55.3 2, 4, 7
1.50 423-pin OOI 72 40 54.7 1, 3, 51.50 423-pin OOI 73 40 57.8 1, 3, 61.50 423-pin OOI 73 40 57.8 1, 3, 7
1.50 478-pin FC-PGA2 73 40 57.9 2, 4, 6
1.50 478-pin FC-PGA2 73 40 57.9 2, 4, 7
1.50 478-pin FC-PGA2 71 40 62.9 2, 4, 7, 10
1.60 423-pin OOI 75 40 61.0 1, 3, 61.60 423-pin OOI 75 40 61.0 1, 3, 7
1.60 478-pin FC-PGA2 75 40 60.8 2, 4, 6
1.60 478-pin FC-PGA2 75 40 60.8 2, 4, 7
1.60A 478-pin FC-PGA2 66 40 46.8 4, 8, 9, 10
1.70 423-pin OOI 76 40 64.0 1, 3, 61.70 423-pin OOI 76 40 64.0 1, 3, 7
1.70 423-pin FC-PGA2 76 40 63.5 2, 4, 6
1.70 478-pin FC-PGA2 76 40 63.5 2, 4, 7
1.70 478-pin FC-PGA2 73 40 67.7 2, 4, 7, 10
1.80 423-pin OOI 78 40 66.7 1, 3, 61.80 423-pin OOI 78 40 66.7 1, 3, 7
1.80 478-pin FC-PGA2 77 40 66.1 2, 4, 6
1.80 478-pin FC-PGA2 77 40 66.1 2, 4, 7
*Notes:
1. These specifications are from the Pentium® 4 Processor in the 423-pin PackageDatasheet.
2. These specifications are from the Pentium® 4 Processor in the 478-pin PackageDatasheet.
3. This processor is in the 423-pin OLGA on Interposer (OOI) package.
4. This processor is in the 478-pin FC-PGA2 package.
5. These specifications apply to processors based on the B2 stepping (1.70V).
6. These specifications apply to processors based on the C1 stepping (1.75V).
7. These specifications apply to processors based on the D0 stepping (1.75V).
8. These specifications are from the Pentium® 4 Processor with 512KB L2 Cache on0.13 Micron Process Datasheet.
9. These specifications apply to processors based on the B0 stepping (1.50V).
10. Some processors at this frequency have specifications that differ from those in thedatasheet. These parts are distinguishable by their S-Spec number. Refer to theProcessor Spec Finder tool for the detailed specifications and for the specific S-Specsassociated with these different specifications.
11. These specifications apply to processors based on the C1 stepping (1.525V)
12. These specifications apply to processors based on the C1 stepping (1.550V).
13. Some processors at this frequency have different VIDs. These specifications arebased on the highest VID for this processor frequency. See the Intel® Pentium® 4Processor Datasheet for details.
14. These specifications apply to processors based on the D1 stepping (1.550V).
15. These specification apply to processor based on the D1 stepping (1.525V).