CPT ANSI B73.1 MBN Ring Section Pump Linesheet.pdf• Exceeds standard requirements of ASME B73.1...
Transcript of CPT ANSI B73.1 MBN Ring Section Pump Linesheet.pdf• Exceeds standard requirements of ASME B73.1...
11104 W. Airport #220 Stafford, Tx. 77477
Phone: 281-407-0799 Email: [email protected]
• Capacities to 7,000 GPM (1,600 m3/hr)• Heads to 720 feet (220m)
• Pumping temperatures to 500° F (260° C)
• Exceeds standard requirements of ASME B73.1 standard
• Modular design minimize the spare part inventory costs
• Bearing life exceeds all ANSI requirements
• Single Seals, Tandem w/ Plan 11/52, Double w/ Plan 11/53
• Capacities to 3,080 GPM (700 m3/hr)• Heads to 2,950 feet (900 m)
• Pumping temperatures to 355° F (180° C)
• Working pressures to 1450 PSIG (100 bar)
• High efficiency, low NPSH impellers
• Replaceable stationary PEEK wear parts
•
MBN
Rin
g Se
ctio
nA
hlst
ar A
Pr
oces
sC
PTA
NSI
B73
.1
Balance disc at NDE as balancing device yields max efficiency
• Capacities to 39,600 GPM (9,000 m3/hr)• Heads to 525 feet (160 m)
• Pumping temperatures to 356° F (180° C)
• Working pressures to 360PSIG (25 bar)
• Versatile range of reliable and efficient EnerSave™ impellers
• Robust, reliable and patented Rotokey impeller mounting
• Can be fitted with Degassing and Self-Priming Units
• Capacities to 11,440 GPM (2,600 m3/hr)
• Heads to 1000 feet (300m)
• Pumping temperatures to 800° F (425° C)
• Working pressures to 1450 PSIG (100 bar)
• Meets API - 8th edition standards
• 300# and 600# flange ratings
• Single Seals or Tandem with Plan 11/52
ZE/Z
FA
PI-6
10 8
th
• Chrome Steel, Duplex SS and Super Duplex SS
11104 W. Airport #220 Stafford, Tx. 77477
Phone: 281-407-0799 Email: [email protected]
ZPP
Dou
ble
Suct
ion
• Capacities to 132,000 GPM (30,000 m3/hr)• Heads to 525 feet (160 m)• Pumping temperatures to 194° F (90° C)• Working pressures to 362 PSIG (25 bar)
• Versatile, reliable, high-efficiency hydraulics and material options
• Exceeds requirements of international ISO 5199 standard
• Double suction impeller, with split, staggered and skewed vanesfor high efficiency and low NPSH values.
• JTS Standard Vertical Turbine - 7" to 20" bowls. Flow to 8000gpm and 1000ft TDH• JTS NON API Vertical Can Pumps - 7" to 20" bowls. Flows to 8000gpm and 1000TDH• AHLSTAR NV non-clogging vertical line shaft slide bearing sump pumps
Vertical Turbines & Sumps
• FV Non-clogging Vertical Cantilever Sump Pumps
Agitators
Mixers
Waste Water Pumps Dewatering Pumps Turbo Compressors