SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIASOLMAX.COM

Covering the world.Protecting the Earth.

Rev

05.1

6

Covering the world.Protecting the Earth.

NORTH AMERICAN PLANT2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234Toll free in North America: 1.800.571.3904

ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600

SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999

CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA

Solmax is not a design professional and has not performed any design services to determine if Solmax's goods comply with any project plans or speci�ications, or with the application or use of Solmax's goods to any particular system, project, purpose, installation or speci�ication.

At Solmax, we understand that a flexible and weathering resistant geomembrane is in-line with our clients’ needs. But also, that factory-fabricated geomembranes hold tremendous advantages. They are cost-effective, time-efficient and improve the project’s overall quality. High-quality seams performed in a controlled environment are instrumental in completing an installation job successfully and in a timely fashion.

With that in mind, Solmax brings to the market the F3 SERIES, geomembranes specifically formulated for fabricated polyethylene panels.

Due to its outstanding FLEXIBILITY, the F3 SERIES is easy to FABRICATE and easy to FOLD and is sure to benefit the industry:

Excellent Flexibility Properties Excellent Weathering Resistance Proven Installation Efficiency Proven Folding Capabilities

2

Using a special blend of high quality resins, Solmax’s F3 Series is the best long-lasting and flexible material currently available in the industry. With multi-axial deformation greater than 90%*, the specially formulated resin used in the F3 Series makes this series of geomembranes the most flexible non-reinforced PE geomembrane available on the market as of today. The proprietary resin blend has high tensile strength and exhibits high impact and puncture resistance. It also has great environmental stress-cracking resistance and multiaxial stress resistance.

Solmax’s F3 Series is perfectly suited for projects completed in cold climates, difficult site conditions and subgrades. In fact, Solmax tested the F3 Series under the Large Scale Hydrostatic Puncture Testing to evaluate the real behavior of the material on the field.

F FOR FLEXIBLE

F3 Series 30 mils / 0.75 mm F3 Series 40 mils / 1 mm

Multi-Axial Testing ASTM D-5617 > 90 % > 90 %

Critical Cone Height ASTM D-5514 1.5 in 1.5 in

Factory fabrication allows for large panel deployment. Such panels can be customized to each project, saving as much as 80%* of the installation time. High-quality seams are performed and tested in a climate controlled facility ensuring that no destructive testing is done.

As shown in the table below, factory fabrication enables the reduction of the material used by up to 67%** since the quantities lost to bad seams, destructive testing and cutting of the first layers of the roll are eliminated. Factory fabricated panels can also be customized to the project’s exact quantities provided that the initial take-off has been performed as per specifications.

Factory fabrication of geomembranes is key to many projects. However, not all geomembranes can be fabricated and folded due to their lack of flexibility. Solmax’s F3 Series can be fabricated and engineered into the specific requirements for a project providing installers and engineers the best performing product for any given site conditions.

Solmax’s F3 Series is made with of a special blend of high quality resins that can be easily prefabricated and packaged.

F FOR FABRICATION

Fabricated Field Assembly

Installation 23 panels 29 rolls

Field Seam Length 15,400 lf 46,800 lf

*(Stark et Al, 2011)

**Fabricated Geomembrane Institute

3

The stiffer a geomembrane is, the higher the chances of creasing it during the folding process is. Folding can result in a weakness that could become the starting point of cracking and/or accelerated aging. The F3 Series is flexible enough that it can be factory seamed into large panels, folded, transported and unfolded without undergoing any damage, even in the harshest weather conditions, as shown by the data below.

Data obtained by these test methods have been used to predict the behavior of plastic sheeting at low temperatures.

The quick deployment of folded, prefabricated panels allows large areas of the prepared subgrade to be covered quickly to prevent degradation due to weather and installation operations.

Fabricators using the F3 Series of geomembranes can fold and ship panels that range from 1,816 kg (4,000 lbs) to 2,724 kg (6,000 lbs) covering an area of 2,950m2 (30,770 ft2).

F FOR FOLDABLE

F3 Series 30 mils / 0.75 mm F3 Series 40 mils / 1 mm

Low Temperature Impact ASTM D-1790 -94°F / -70 °C -94°F / -70 °C

Low Temperature Brittleness ASTM D-746 -106 °F / - 77 °C -106 °F / - 77 °C

4

In cold temperatures, the F3 Series behaves the same way as the best available LLDPE geomembrane.

In 2014, Solmax published “A Case Study on the Installation of LLDPE Geomembranes in Cold Weather” for the Mining Geosynthetics conference held in Vancouver, Canada.

A Case Study on the Installation of LLDPE Geomembranes in Cold Weather

As a world leader in geomembrane innovation, Solmax is proud to offer the F3 Series, a liner solution in-line with Solmax’s core values: Offering the best containment solutions that meet customers’ needs.

For additional information on the F3 Series or any other products, please contact your local representative.

F FOR FREEZING POINT

5

Property Test Method Unit Metric/Imp. F3 SERIES

Thickness ASTM D-5199 mils/mm 0.75/30 1.0/40

Sheet Density ASTM D-1505 g/cm3 ≤ 0.939 ≤ 0.939

Physical

Roll Width m/ft 6.8-8/22.3-26.2 6.8-8/22.3-26.2

Roll Length (min-max) m/ft 104-191/341-628 96-176/314-577

Dimensions

Tensile Properties (min. avg.) ASTM D-6693

Strength at Break kN/m / ppi 20/114 27/152

Elongation at Break % 800 800

Tear Resistance ASTM D-1004 N / lbf 70/16 100/22

Large Scale Hydrostatic Puncture ASTM D-5514 in 1,5 1,5

Multi-Axial Tensile ASTM D-5617 % 90 90

2% Modulus (max.) ASTM D-5323 kN/m / ppi 315/1800 420/2400

Mechanical

Carbon Black Content ASTM D-4218 % 2.0-3.0 2.0-3.0

Carbon Black Dispersion ASTM D-5596 Category Cat. 1 & Cat. 2 Cat. 1 & Cat. 2

OIT - Standard (avg.) ASTM D-3895 min 100 100

Oven Aging @85 °C - % Retained after 90 days ASTM D-5721

STD OIT (min avg.) ASTM D-3895 % 35 35

HP OIT (min avg.) ASTM D-5885 % 60 60

UV Resistance - % Retained after 1600 hours ASTM D-7238

HP OIT (min avg.) ASTM D-5885 % 35 35

Low Temperature Impact ASTM D-1790 °C / °F (-) 70/94 (-) 70/94

Low Temperature Brittleness ASTM D-746 °C / °F (-) 106/77 (-) 106/77

Dimensional Stability ASTM D-1204 % ± 2 ± 2

Endurance

6

SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIASOLMAX.COM

Covering the world.Protecting the Earth.

Rev

05.1

6

Covering the world.Protecting the Earth.

NORTH AMERICAN PLANT2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234Toll free in North America: 1.800.571.3904

ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600

SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999

CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA

Solmax is not a design professional and has not performed any design services to determine if Solmax's goods comply with any project plans or speci�ications, or with the application or use of Solmax's goods to any particular system, project, purpose, installation or speci�ication.