cover page - Saveurja for Streets and Public spaces.pdf · cuStomer SPeak “Wipro Lighting has...
Transcript of cover page - Saveurja for Streets and Public spaces.pdf · cuStomer SPeak “Wipro Lighting has...
�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
cover page
Lighting for StreetS and PubLic SPaceS
�
Turbo .15[WST/H 69]
uno .16[WST/H 71]
Leo .18[WST/H 76]
expreSS .19[WSM/S 24]
expreSS .19[WST/H 25]
WST 65 .23
contentS
customer Speak .06
applications guide .08
product codification .10
Ingress protection (Ip) classification .11
customer benefits .13
Product indeX
WSM 20/21 .26 WSS 20/21 .26
a. Street Light Luminaires [hid]
WSF 15 .28 WSp 11126 .29 WpM/S 27 .31
vecTor .34WFH 51
vecTor .34WFT/ H 52
WFZ 31 .35 WFZ 42 .36 SpecTra [WFZ 66] .37
c. flood Light Luminaires
b. Street Light Luminaires [cfL/ ftL] & Post tops
Lighting for StreetS and PubLic SPaceS
Modern Trends in Street Lighting .38
Lamp Information .42
branch addresses
cuStomer SPeak
“Wipro Lighting has been at the forefront of
offering leading edge technologies. I recommend
Wipro Lighting Products & solutions as they offer
the best value for our clients.”
B. R. V. MUTRHY
Potential Service consultants (P) Ltd., bangalore
We have used Wipro Lighting Solutions and Products for
BCCI offices in Mumbai. The Lighting Solutions, Technical
Support and Designs provided by Lighting Solution Group,
Mumbai is good and innovative. Their Lighting Solutions
have helped us in creating best lighting effects for their
prestigious project. The response time in submitting
designs is also good.
We wish them all the best for the future ahead.
Amol Prabhu
Shashi Prabhu and associates, Mumbai & Pune
It is my privilege to endorse the product
of Wipro Lighting. We have been using
the fitting and the fixtures of Wipro in our
institutional, health care and office building.
We have found the products worthy and have
value for its cost.
sAngeeT sHARMA
S. d. Sharma and associates
Panchkula
We are glad to appreciate the products and
services offered by Wipro Lighting for several
projects. We find that they have very wide range
of products to suit varied needs, which include
interior, exterior and landscape lighting.
We are very much satisfied with the service,
products and especially the post delivery services
offered, and will surely consider them for our
future projects. We wish them all the best.
sUResH PATel,
Sthapati interiors Pvt. Ltd., ahmedabad
�
aPPLicationS guide
Offices(Open-plan Offices, sOftware develOpment centers, call centers, fOyers, cOrridOrs, Office OutdOOrs, etc.)
HOtel & caterinG(Bars, HOtel rOOms, restaurants, canteens, OutdOOrs, etc.)
car parKs
GaraGe
autO sHOwrOOm
HOspitals & clinics(wards, OperatinG tHeaters, General rOOms, HOspital OutdOOrs)
entrance areas
HOmes
scHOOl & lecture Hall
puBlic access & circulatiOn areas(entrance Halls and lOBBies, staircases)
pHarmaceutical plant(cleanrOOm & semi cleanrOOm areas)
receptiOn
swimminG pOOl
mines
cOnveyOr Gallery
auditOrium
facade liGHtinG
statues
Lighting for StreetS and PubLic SPaceS
�
pOrts and dOcKs cOnferences maJOr rOads(HiGHways, BOulevards, cOllectOr rOads, rOundaBOuts, crOssinGs, traffic JunctiOns)
service area
railway statiOn
airpOrts
lOcal rOads(sOciety rOads & sHOppinG streets witH mainly lOcal traffic)
secOndary rOads(urBan & rural rOads)
resOrt
wareHOuses
tHe arts(art Galleries, museums, cinemas, places Of wOrsHip, etc.)
Gardens(parKs, farmHOuses, resOrts, BunGalOws)
spOrts facilities
BanKs & insurance cOmpanies
petrOl pump
fOOd and BeveraGe industry
retail sHOp racKs
manufacturinG plant(prOductiOn plants, wOrKsHOps, laBOratOries, etc.)
Lighting for StreetS and PubLic SPaceS
10
W 6� ��0WIPRO STREET lIghT Mhl WATTAgE
OF lAMPPRODUCT
CODE
S h
Product codification
first letter - cOmmOn fOr all prOducts
w wiprO f fantasy
u urBanO G GalaXy
c cleanrOOm
SECOND lETTER - PRODUCT TYPEc cOmmercial v cOmmerciali industrial H HiGHBay/ midBay/ lOwBays street/ stepliGHt f flOOd liGHtw well Glass/ wall liGHt K BulKHeadp pOst tOp B Ballast/ BOllarda aviatiOn r retailu underwater d driveOver/ walKOvert tracKliGHt G cOntrOl Gear
ThIRD lETTER - TYPE OF lAMPG incandescent lamp: Glsf linear fluOrescent lamp: ftlp cOmpact fluOrescent lamp: cflm HiGH pressure mercury vapOur lamp: Hpmvs HiGH pressure sOdium vapOur (elliptical) lamp: Hpsv-et HiGH pressure sOdium vapOur (tuBular) lamp: Hpsv-tQ tunGsten HalOGen lampn neOn spiral lampH metal Halide lamp: mHl
first two numerals: product code as per design methodologythird numeral: no. of lamps in the luminaire last two numerals: wattage of lamps used in the luminaire
EXCEPTIONSin case of Hid luminaires (mercury/ sodium/ metal Halide) the last three numbers represent the lamp wattage. number of lamps is not indicated.
in case of aviation obstruction luminaire, the numerals do not represent the wattage of the lamp.
NOTE* all trademarks are properties of the respective owners.** innovation and improvement are a way of life at wipro. we reserve the right to modify the product without prior intimation.
Given below is an example to explain the process of codification.
the products are assiGned cataloGue nos. based on product type, lamp type, number of lamps and wattaGe of the lamp used.
Lighting for StreetS and PubLic SPaceS
��
ingreSS Protection (iP) cLaSSification - degree of Protection
Lighting for StreetS and PubLic SPaceS
DegRee of PRoTecTion inDicATeD BY THe fiRsT cHARAcTeRisTic nUMeRAl (DUsT PRoTecTion)
DescRiPTion sHoRT DefiniTion
0 Non-protected No special protection
1 Protected against solid objects greater than 50 mm
A large surface of the body, such as a hand (but no protection against deliberate access). Solid objects exceeding 50 mm diameter
2 Protected against solid objects greater than 12 mm
Finger or similar objects not exceeding 80 mm in length. Solid objects exceeding 12 mm in diameter
3 Protected against solid objects greater than 2.5 mm
Tools, wires etc of diameter or thickness greater than 2.5 mm. Solid objects exceeding 2.5 mm in diameter
4 Protected against solid objects greater than 1 mm
Wires or strips of thickness greater than 1.0 mm. Solid objects exceeding 1.0 mm in diameter
5 Dust-protected Ingress of dust is not totally prevented. But dust does not enter in sufficient quantity to interfere with satisfactory operation of the equipment
6 Dust-tight No ingress of dust
DegRee of PRoTecTion inDicATeD BY THe seconD cHARAcTeRisTic nUMeRAl (MoisTURe PRoTecTion)
DescRiPTion sHoRT DefiniTion
0 Non-protected No special protection
1 Protected against dripping water
Dripping water (vertically falling drops) shall have no harmful effect
2 Protected against dripping water when tilted up to 15O
Vertically falling drops shall have no harmful effect when the object is tilted to any angle upto 15O from its normal position
3 Protected against splashing water
Water falling as a spray at an angle up to 60O from the vertical shall have no harmful effect
4 Protected against splashing water
Water splashed against the enclosure from any direction shall have no harmful effect
5 Protected against water jets
Water projected by a nozzle against the enclosure from any direction shall have no harmful effect
6 Protected against heavy seas
Water from heavy seas or water projected in heavy jets shall not enter the enclosure in harmful quantities
7 Protected against the effect of immersion
Ingress of water in a harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time
8 Protected against submersion
The equipment is suitable for continuous submersion in water under conditions which shall be specified by the manufacturer. Note: Normally this will mean that the equipment is hermetically sealed. However with certain types of equipment it can mean that water can enter but only in such a manner that it produces no harmful effects
�3Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
cuStomer benefitS
SimPLe moduLaritY
VaLue for moneY
aeSthetic
0�enhancedefficiencY
LuminaireS with different ShaPeS and formS, enhanceS the oPticaL quaLitY of Surrounding areaS
high ingreSS Protection LuminaireS
•
•
VarietY of aeSthetic LuminaireS makeS StreetS PLeaSing bY daY and Stunning bY night
high quaLitY materiaLS and unique finiSh, ProVideS the range, SPeciaL StYLe and eLegance
•
•
high corroSion reSiStance and Longer Life
wide range of LuminaireS for Varied aPPLicationS
•
•
03
02
04
wide and uniform Light diStribution
integrateS weLL with anY kind of Site and architecturaL eLementS
•
•
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
14
Turbo [WST 69/ WSH 69]
��Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
SPECIFICATIONSdie cast aluminium compact and aesthetic housing with
electrochemically brightened high purity anodised aluminium pot optics reflector
ip 66 optically sealed lamp compartment with flat toughened glass totally sealed to reflector using silicon sealant ensuring ip and long life performance
top maintainable product with hingeable top cover with loss proof thumb screw giving access to control gear and lamp compartment
anti corrosive stainless steel clamps with gasket totally seals lamp holder cap and facilitates easy lamp replacement
special air breathing filter is provided in lamp holder cap for better ventilation to ensure longer lamp life
lamp position adjustment to control distribution of light on street side and kerb side of road
removable control gear for ease of maintenanceintegral pole mounting arrangementHeavy duty copper wound ballast, pf capacitor and electronic
ignitor per-wired upto terminal block.conforms to is 10322 part 5/ sec 1: 19�7
ACCESSORIES4 way 10 amps Gfp mains connectorlamp holder base e40 porcelain body with silver contacts
INSTAllATIONinstallation to suit 60 mm diameter pole
•
•
•
•
•
•
•••
•
••
•
turbo [ wSt 69/ wSh 69 ]DIe-caST aLuMInIuM Top MaInTaInabLe STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor
electrical data cat.no lamp rated voltage (v) mains current (a) approx weight (kg) case lot (in nos)WST 69150 1 x 150 W HPSV (T) 230/ 240 0.8 8.70 01WST 69250 1 x 250 W HPSV (T) 230/ 240 1.3 10.00 01WSH 69250 1 x 250 W MHL (T) 230/ 240 1.3 10.00 01
suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps
DIMenSIon DraWIng WST 69/ WSH 69
160
582
302
lamp cOmpartment: ip 66Gear cOmpartment: ip 54
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
16
uno [ wSt 71/ wSh 71 ]DIe-caST aLuMInIuM Top MaInTaInabLe STreeT LIgHT LuMInaIre WITH curveD TougHeneD gLaSS
SPECIFICATIONSpressure die cast, compact and aesthetic housing
with electrochemically brightened high purity anodized aluminium pot optics reflector
ip 66 sealed lamp compartment with curved toughened glass totally sealed to reflector using silicon sealant
top maintainable product with quick release lamp holder assembly
anti corrosive, stainless steel quick release toggle facilitates easy opening of top cover and gives instant access to lamp compartment
top cover link mechanism enables holding top cover in open state during maintenance
variable optics arrangement to control distribution of light on street and kerb side of road
lamp compartment is totally sealed near lamp holder assembly using silicon gasket
special air breathing filter is provided for better heat ventilation to facilitate longer lamp life
Heavy duty copper wound ballast, pf capacitor and electronic ignitor pre-wired upto terminal block
conforms to is 10322/ part 5/ sec 1: 19�7
INSTAllATIONinstallation to suit 52 mm diameter pole
•
•
•
•
•
•
•
•
•
•
•
suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps
DIMenSIon DraWIng WST 71/ WSH 71
electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot ( in nos)WST 71150 1 x 150 W HPSV (T) 230/ 240 0.8 9.70 02WST 71250 1 x 250 W HPSV (T) 230/ 240 1.3 11.00 02WSH 71250 1 x 250 W MHL (T) 230/ 240 1.3 11.00 02
52
635
lamp cOmpartment: ip 66Gear cOmpartment: ip 54
uno [WST 71/ WSH 71]
195
270
�7Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
uno [WST 71/ WSH 71]
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
1�
lamp cOmpartment: ip 66Gear cOmpartment: ip 54Leo [ wSt 76/ wSh 76 ]
DIe caST aLuMInIuM STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor
SPECIFICATIONSpressure die cast, compact and aesthetic housing with
electrochemically brightened high purity anodized aluminium pot optics reflector
ip 66 optically sealed lamp compartment with curved toughened glass totally sealed to reflector using silicon sealant
anti corrosive, die cast quick release toggle facilitates easy opening of top cover and gives instant access to lamp compartment
lamp compartment is totally sealed near lamp holder assembly using silicon gasket
variable optics arrangement to control distribution of light on street and kerb side of road
special air breathing filter is provided for better heat ventilation to facilitate longer lamp life
Quick release lamp holder assemblyHeavy duty copper wound ballast, pf capacitor and electronic
ignitor per-wired upto terminal block.conforms to is 10322/ part 5/ sec 1: 19�7
INSTAllATIONside and bottom pole mounting optionsinstallation to suit maximum 60 mm diameter pole
•
•
•
•
•
•
••
•
••
electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (Kg.) case lot (in nos.)WST 76150 1 x 150 W HPSV (T) 230/ 240 0.80 11.00 02WST 76250 1 x 250 W HPSV (T) 230/ 240 1.30 12.20 02WST 76400 1 x 400 W HPSV (T) 230/ 240 2.10 13.30 02WSH 76250 1 x 250 W MHL (T) 230/ 240 1.30 12.20 02WSH 76400 1 x 400 W MHL (T) 230/ 240 2.10 13.30 02
suitable for 150/ 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps
DIMenSIon DraWIng WST 76/ WSH 76
Leo [WST 76/ WSH 76]
258
60
76 778
348
348
��Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
eXPreSS [ wSm/ S 24 ]eXPreSS [ wSt/ h 25 ]poT opTIcS Ip 65 Deep DraWn aLuMInIuM STreeT LIgHT LuMInaIre
SPECIFICATIONSsingle piece deep drawn aluminium housing with built
in electrochemically brightened, anodised high purity aluminium pot optics reflector
die cast aluminium pole mounting system with option of side and bottom entry
silverized finish from outsideHinged toughened glass shieldanti corrosive ss togglesepdm gasketcomplete with heavy duty copper wound ballast, pf capacitorHeat and abrasion resistant Xlpe wiresconforms to is 10322/ part 5/ sec 1 : 19�7
ACCESSORIESlamp Holders es (e40) porcelain10 amps G.f.p mains connector for 2.5 sq. mm
and pf improvement capacitorinternal earthing terminal for 14 swG earthing wirethree wire electronic ignitor; super imposed pulse
type ignitor offered on request
OPTIONAl FEATURESexternal earthing terminalpost top mounting suitable for outer dia: 40-50 mm
(wsm/ s 24 series) & 45-55 mm (wst/ H 25 series)
INSTAllATION
suitable for side bracket mounting on pole with outer dia. 40-50 mm (in wsm/ s 24 series) and 45-55 mm (wst/ H 25 series)
PACkINg CASE lOT Housing: 1 no. Ballast: 4 nos.
•
•
•••••••
••
••
••
•
••
wsm/ s 24 - suitable for 80/ 125 w hpmv and 70 w hpsv (e) lampswst/ h 25 - suitable for 150/ 250 w hpsv (t) and 250 w mhl (t) lamps
DIMenSIon DraWIng WSM/ S 24 DIMenSIon DraWIng WST/ H 25
WSM/ S 24
WST / H 25
electrical data cat. no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot ( in nos)WSM 24080* 1 x 80 W HPMV (BC Lampholder) 230/ 240 0.43 4.10 01 WSM 24125* 1 x 125 W HPMV (BC Lampholder) 230/ 240 0.66 4.50 01WSS 24070 1 x 70 W HPSV (E)(with internal starter) 230/ 240 0.46 4.50 01 WSS 24071 1 x 70 W HPSV (E)(without internal starter) 230/ 240 0.46 4.50 01 WST 25150 1 x 150 W HPSV (T) 230/ 240 0.80 8.70 01 WST 25250 1 x 250 W HPSV (T) 230/ 240 1.30 8.70 01 WSH 25250 1 x 250 W MHL (T) 230/ 240 1.30 8.70 01*In case required with ES cap, suffix ES to the cat. no.
ip 65
480
145
260 600325
185
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
22
WST 65
23Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
wSt 65DIe caST aLuMInIuM STreeT LIgHT LuMInaIre WITH poT opTIcS reFLecTor
SPECIFICATIONSsingle piece die cast aluminium stove enamelled black housing
with electrochemically brightened, anodised high purity aluminium, pot optics parabolic reflector
complete with heavy duty copper wound ballast, pf correction capacitorHingeable acrylic bowlanti corrosive ss togglesepdm gasketconforms to is 10322/ part 5/ sec.1 : 19�7
ACCESSORIESlamp Holder Ges (e40) skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (inside)three wire electronic ignitor
INSTAllATIONsuitable for mounting on pole with outer dia < 60 mmcable entry through bracket from side
OPTIONAl FEATURESepoxy paintingexternal earthing terminal
PACkINg CASE lOT Housing: 1 no acrylic (wsa 65): 10 nos.Ballast: 4 nos.
•
•••••
••••
••
••
•••
60 hoLe
365 648
345
suitable for 1 x 150 w/ 250 w hpsv (t) lamps
DIMenSIon DraWIng WST 65
electrical data cat. no. lamp rated voltage (v) main current (a) approx. weight (kg) case lot (in nos)WST 65150 1 x 150 W HPSV (T) 230/ 240 0.80 8.20 01WST 65250 1 x 250 W HPSV (T) 230/ 240 1.30 9.40 01
WST 65
ip 55
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
26
SPECIFICATIONSsingle piece deep drawn aluminium stove enamelled black
outside and white inside housingHigh purity anodised aluminium side reflectorsHingeable acrylic diffuser: wsa 20 for wsm/ s 20
and wsa 21 for wsm/ s 21epdm foam gasketanti corrosive ss toggles for acrylic bowl clampingcomplete with heavy duty copper wound ballast,
pf correction capacitorconforms to is 10322/ part 5/ sec. 1: 19�7
ACCESSORIESlamp holder 3 pin Bc / es 27 porcelain for wsm/s 20;
and Ges (e40), skirted porcelain for wsm/s 212 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (inside)three wire electronic ignitor (for Hpsv lamps only)all accessories are pre-wired upto terminal block
OPTIONAl FEATURESepoxy paintingexternal earthing terminal
INSTAllATIONsuitable for mounting on pole with-
Outer dia < 50 mm for wsm 20/ wss 20 (with adjustable ‘u’ clamps) Outer dia < 55 mm for wsm 21/ wss 21 (with adjustable ‘u’ clamps)
PACkINg CASE lOT Housing: 1 no. acrylic (wsa 20/ 21): 10 nos.Ballast: � nos. for wsm/ s 20 and 4 nos. for wsm/ s 21
•
••
•••
•
•
••••
••
•
•••
wSm/ S 20wSm/ S 21SIngLe pIece STreeT LIgHT WITH SIDe reFLecTor
WSM/ S 20/ 21
DIMenSIon DraWIng WSM/ S 20 DIMenSIon DraWIng WSM/ S 21
wsm/ s 20 - suitable for 80/ 125 w hpmv and 70 w hpsv (e) lampswsm/ s 21 - suitable for 250 w hpmv and 150/ 250 w hpsv (e) lamps
electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WSM 20080* 1 x 80 W HPMV (BC Lamp holder) 230/ 240 0.43 4.20 01WSM 20125* 1 x 125 W HPMV (BC Lamp holder) 230/ 240 0.66 4.30 01WSS 20070 1 x 70 W HPSV (E) (with Internal Starter) 230/ 240 0.46 4.50 01WSS 20071 1 x 70 W HPSV (E) (without Internal Starter) 230/ 240 0.46 4.50 01WSM 21250 1 x 250 W HPMV 230/ 240 1.30 6.40 01WSS 21150 1 x 150 W HPSV (E) 230/ 240 0.80 6.30 01 WSS 21250 1 x 250 W HPSV (E) 230/ 240 1.30 7.10 01* In case required with ES cap, suffix ES to the cat. no.
ip 43
627
225
355
50 PoLe entrY
43455 PoLe entrY
628
270
27Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
WSM/ S 20/ 21
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
2�
cat. no. a B c d (inner diameter)WCP 15140 1340 120 105 35WCP 15240 1345 145 125 43
SPECIFICATIONSsheet aluminium stove enamelled grey housing fitted
with gear trayclear ribbed acrylic coverslim open type low loss copper wound ballast,
pf correction capacitorconforms to is 10322/ part 5/ sec. 1: 19�7
ACCESSORIESsleek snap fit rotor holder & starter seatpinch type starter with r.f. suppression capacitor2 way 5 amps Gfp mains connector for 1 sq. mm incoming cableearthing terminal for 14 swG earthing wire all accessories are pre-wired upto terminal block
INSTAllATIONprovision for mounting through pole with -
pipe outer dia < 35 mm for wsf 15140 pipe outer dia < 43 mm for wsf 15240
cable entry from side through rubber piercing plug
OPTIONAl FEATURESsuper low loss ballastepoxy paintingexternal earthing terminal
•
••
•
•••••
•
•
•••
wSf 15SeconDarY roaD FLoureScenT STreeT LIgHT LuMInaIre
a
b
cd
suitable for 36 w/ 40 w ftl (t8) lamps
electrical data cat. no. lamp rated voltage (v) main current (a) approx. weight (kg) case lot (in nos)WSF 15140 1 x 36/40 W FTL (T8) 230/ 240 0.23 3.80 08WSF 15240 2 x 36/40 W FTL (T8) 230/ 240 0.43 4.50 06
DIMenSIon DraWIng WSF 15
WSF 15
ip 44
2�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
SPECIFICATIONS long life silverised finish aluminium housinglong life epdm foam gasketfitted with stainless steel toggles for easy
maintainance of productremovable gear tray helps faster maintainancecable entry from side through rubber piercing plugdeep drawn aluminium housing fitted with gear trayclear acrylic coverslim open type low watt loss copper wound ballastconform s to is 10322/ part 5/ sec. 1: 19�7
ACCESSORIESsleek pBt lamp holder & starter seatpinch type starter2 way 5 amps Gfp. mains connector for 1.0 sq. mm. incoming
cable internal earthing terminal for 14 swG earthing wire
INSTAllATIONprovision for mounting through pole with pipe outer diameter
from 20 to 32 mm
OPTIONAl FEATURESexternal earthing terminal
•••
••••••
•••
•
•
wSP 11136SILverISeD FInISH coMpacT FLuoreScenT (cFL) STreeT LIgHT
WSp 11136
DIMenSIon DraWIng WSp 11136
suitable for 1 x 36 w cfl (tc-l ) lamps
electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WSP 11136 1 x 36 W CFL (TC-L) 230/ 240 0.23 1.50 08
490 105
105
ip 54
3�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
590
380
100
inner diameter 60
SPECIFICATIONS rota moulded double conical shaped Hdpe domecast aluminium spigot fitted with gear tray, heavy duty copper
wound ballast, with or without p. f. capacitorHeat and ageing resistant gasket between spigot and domea bracket fixed to gear tray supports the lamp holder for fixing
lamp in cap-up positionsconforms to is 10322/ part 5/ sec. 1: 19�7
ACCESSORIESlamp holder 3 pin Bc/ es 27 porcelain 2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wire (internal)three wire electronic ignitor (for Hpsv lamps only)all accessories are pre-wired upto terminal block
INSTAllATIONsuitable for mounting on pole with outer dia < 60 mmcable entry through pole from bottom
PACkINg CASE lOTspigot assembly : 1 no., dome : 1 no., Ballast : � nos
••
••
•
•••••
••
•
wPm 27/ wPS 27DecoraTIve DoubLe conIcaL InTegraL poST Top LuMInaIre
WpM 27/ WpS 27
DIMenSIon DraWIng WpM 27/ WpS 27
suitable for 80/ 125 w hpmv and 70 w hpsv (e) lamps
electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WPM 27080* 1 x 80 W HPMV (BC lamp holder) 230/ 240 0.43 5.20 01WPM 27125* 1 x 125 W HPMV (BC lamp holder) 230/ 240 0.66 5.60 01WPS 27070 1 x 70 W HPSV (E) (with internal starter) 230/ 240 0.46 5.60 01WPS 27071 1 x 70 W HPSV (E) (without internal starter) 230/ 240 0.46 5.60 01* In case required with ES cap, suffix ES to the cat. no.
ip 55
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
34
electrical data cat no. lamp rated voltage (v) mains current (a) approx. weight (kg) case lot (in nos)WFH 51070 1 x 70 W MHL (HIT-DE ) 230/ 240 0.41 4.10 02WFH 51150 1 x 150 W MHL (HIT-DE) 230/ 240 0.84 5.10 02WFT 52150 1 x 150 W HPSV (T) 230/ 240 0.80 7.80 01WFT 52250 1 x 250 W HPSV (T) 230/ 240 1.30 9.20 01WFT 52400 1 x 400 W HPSV (T) 230/ 240 2.10 10.20 01WFH 52250 1 x 250 W MHL (T) 230/ 240 1.30 9.20 01WFH 52400 1 x 400 W MHL (T) 230/ 240 2.10 10.20 01
Vector [ wfh 51 ] Vector [wft/ h 52 ] InTegraL FLooDLIgHT WITH aSYMMeTrIc beaM reFLecTor
SPECIFICATIONS die cast aluminium stove enameled housing with adjustable
mounting cradleHigh purity anodized aluminium reflector with bright hammered
finish for wide beam light distributionanti corrosive stainless steel togglesHeat resistant hingeable toughened glass and silicon
gasket assemblyZinc passivated removable control gear tray with a separate
chamber for efficient heat dissipationip 65 - dust, water and insect proofHeavy duty copper wound ballast and all accessories
pre-wired upto terminal blockconforms to is 10322/ part5/ sec. 1: 19�7
ACCESSORIESlamp holder e40 base porcelain (wfZ 52) and rx-7s base (wfZ 51)10 amps Gfp mains connector for 2.5 sq. mm cablepf improvement capacitorexternal double compression cable glandthree wire electronic ignitor
•
•
••
•
••
•
•••••
405
445
305
290
160
140
220
105
105
295
195
120
wfh 51 - suitable for 70/ 150 w mhl (hit-de) lampswft/ h 52 - suitable for 150/ 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps
DIMenSIon DraWIng WFH 51
WFH 51
DIMenSIon DraWIng WFT/ H 52
WFT/ H 52
ip 65
3�Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
SPECIFICATIONSdie cast aluminium oxy-metallised lamp holder housing with
cooling fins, spun high purity anodised aluminium parabolic reflector
Heat resistant toughened glass sealed with silicon sealantmounting cradle along with protractorconforms to is 10322/ part 5/ sec 1 : 19�7
ACCESSORIES
lamp Holder base Ges (e 40), skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableXlpe internal wiring with class ‘H’ insulationearthing terminal for 14 swG earthing wiresuitable for 19 mm et cable entrylamp holder is pre-wired upto terminal block
INSTAllATIONmounting with 3 nos. of m-12 bolt on mounting cradle
note : distance of control Gear Box from iuminaire should be less than 30 mtrs. for proper re-ignition
OPTIONAl FEATURESepoxy paintingexternal earthing terminal
PACkINg CASE lOTflood light : 1 no., c. G. Box: 4 nos., Ballast : 4 nos
•
•••
••••••
•
••
•
wfz 31non-InTegraL SYMMeTrIc FLooD LIgHT LuMInaIre
495
510
14 hoLe3 noS. 5050
WFZ 31
DIMenSIon DraWIng WFZ 31
suitable for 1 x 250 w and 1 x 400 w hpmv/ hpsv (e/t)/ mhl lamps
ip 65
electrical data cat.no lamp type rated voltage (v) mains current (a) approx. weight (Kg) case lot cG BoxWFZ 31250 1 x 250 W HPMV 230/ 240 1.3 6.0 01 WGM 56250/16250WFZ 31250 1 x 250 W HPSV (E/T) 230/ 240 1.3 6.0 01 WGS 56250/16250WFZ 31250 1 x 250 W MHL 230/ 240 1.3 6.0 01 WGH 56250/16250WFZ 31400 1 x 400 W HPMV 230/ 240 2.1 6.0 01 WGM 56400/16400WFZ 31400 1 x 400 W HPSV (E/T) 230/ 240 2.1 6.0 01 WGS 56400/16400WFZ 31400 1 x 400 W MHL 230/ 240 2.1 6.0 01 WGH 56400/16400
Please order suitable control gear box
Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
36
wfz 42HeavY DuTY non-InTegraL SIngLe LaMp aSYMMeTrIc WIDe beaM FLooD LIgHT LuMInaIre
SPECIFICATIONS die cast aluminium painted black housing with
mounting cradle along with protractorHigh purity anodized aluminium reflector with
bright hammered finishtoughened glass permanently fixed to housing
using silicon sealantnarrow beam distribution can be offered on requestconforms to is 10322/ part 5/ sec. 1: 19�7
ACCESSORIESlamp Holder base Ges (e 40), skirted porcelain2 way 10 amps Gfp mains connector for 2.5 sq. mm incoming cableearthing terminal for 14 swG earthing wiresuitable for 19 mm et cable entrylamp holder is pre-wired upto terminal blocksilicon insulation internal wiring
INSTAllATION mounting with 3 nos. m-12 bolt on mounting cradle
note : distance of control Gear Box from iuminaire should be less than 30 mtrs. for proper re-ignition.
OPTIONAl FEATURESepoxy paintingexternal earthing terminal
PACkINg CASE lOTflood light (wfZ 40) : 1 no., c. G. Box: 4 nos., Ballast : 4 nos
•
•
•
••
••••••
•
••
•suitable for 250/ 400 w hpsv (t) and 250/ 400 w mhl (t) lamps
WFZ 42
electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot cG BoxWFZ 42250 1 x 250 W HPSV (T) 230/ 240 1.3 4.1 01 WGS 56250/16250WFZ 42400 1 x 400 W HPSV (T) 230/ 240 2.1 4.1 01 WGS 56400/16400WFZ 42250 1 x 250 W MHL (T) 230/ 240 1.3 4.1 01 WGH 56250/16250WFZ 42400 1 x 400 W MHL (T) 230/ 240 2.1 4.1 01 WGH 56400/16400
Please order suitable control gear box
DIMenSIon DraWIng WFZ 42
406145
72.53 nos.
300
139
ip 65
37Lighting for StreetS and PubLic SPaceSAll Dimensions are in mm., Tolerance ±2mm, Images are not to scale
SPectra [wfz 66]non-InTegraL SYMMeTrIc WIDe beaM FLooD LIgHT LuMInaIre
SPECIFICATIONS extruded ribbed anodised aluminium compact and aesthetic
housing with pdc oxy-metallised aluminium end caps for better heat dissipation
specially designed pre-anodized super high purity aluminium reflector
Heat resistant toughened glass and epdm gasketanti corrosive stainless steel toggles for tool less
lamp replacementmounting cradle with protractorconforms to is 10322/ part 5/ sec. 1: 19�7
INSTAllATION mounting with 2 nos., m10 bolts on cradle
PACkINg CASE lOTfloodlight: 1 no.; c.G. Box: 4 nos.; Ballast: 4 nos.
•
•
••
••
•
•
suitable for 2 x 250 w and 2 x 400 w hpsv (t) and mhl (t) lamps
SpecTra [WFZ 66]
electrical data cat.no lamp rated voltage (v) mains current (a) approx. weight (kg) case lot cG BoxWFZ 66250 2 x 250 W HPSV (T) 230/ 240 2.6 7.2 01 WGS 56250/16250 (2 nos)WFZ 66400 2 X 400 W HPSV (T) 230/ 240 4.2 7.2 01 WGS 56400/16400 (2 nos)WFZ 66250 2 X 250 W MHL (T) 230/ 240 2.6 7.2 01 WGH 56250/16250 (2 nos)WFZ 66400 2 X 400 W MHL (T) 230/ 240 4.2 7.2 01 WGH 56400/16400 (2 nos)
Please order 2 nos suitable control gear box
DIMenSIon DraWIng WFZ 66
ip 65
cat. no. DiM-AWFZ 66250 675WFZ 66400 735
168diM-a
180 c/c
335
422
Ø 10.5 mm holes, 2 nos.
3�
modern trendS in Street Lighting
NEED FOR STREET lIghTINg
a. IMproveS vISuaL conDITIonS on roaD DurIng nIgHTas darkness increases, visual performance deteriorates. road
lighting restores lost performance, enabling shapes and colours to be adequately made out.
a research, focusing on road lighting and accidents, shows that good road lighting improves visual performance and considerably reduces the number of accidents – by 30% overall and by 45% on country roads, and at crossroads and accident black spots.
b. IMproveS nIgHT TIMe SaFeTYwe rely on our eyes for more than �0% of the sensory impressions
we register. so poor visual conditions obviously reduce the amount of information that reaches our brain. that, in road traffic, is extremely dangerous. road lighting thus makes for greater safety at night, because it helps or even actually enables us to fill the gaps in the information we receive.
it is not enough just to maintain the correct lighting level. Brightness also needs to be distributed evenly so that visual tasks – including the “navigational tasks” – can be properly performed. dark patches act as camouflage, making obstacles and hazards hard to make out or completely concealing them from view. camouflage zones occur where too few luminaires are installed or individual luminaires are deactivated or defective.
c. reDuceS nIgHT TIMe accIDenTSGood road lighting improves visual performance and considerably
reduces the number of accidents. doubling the average roadway luminance significantly reduces the number of accidents, that happen at night.
despite lighter traffic, accidents on the roads at night are both more frequent and more serious than during the day. although night time motoring accounts for only 25% of all kilometers driven, nearly 50% of fatal accidents occur during the hours of darkness.
D. reDuceS crIMe DurIng nIgHTGood, correct lighting also prevents crime. experience has
shown that acts of violence and crimes against property are mostly committed in dark, secluded places. those who commit them are less inhibited in such places because there is less risk of being identified and because potential victims are insecure and more vulnerable.
Higher horizontal illuminance – together with high vertical illuminance where the presence of pedestrians is pronounced – makes for better visual perception: suspicious movements are spotted farther away, details and the intentions of approaching figures are made out more clearly. Higher lighting level gives residents a greater sense of security, which makes for a better neighbourhood and a better quality of life.
e. FacILITaTeS TraFFIc FLoWGood street lighting gives the vehicles correct direction, especially
important on country roads. when one is travelling alone on unfamiliar roads, street lighting helps in giving a cue on where one needs to proceed.
•
•
•
•
•
•
•
•
•
daylight – visual performance at peak
night time – visual performance deteriorates
Lighting for StreetS and PubLic SPaceS
3�
ADDITIONAl PlANNINg REQUIREMENT FOR STREET lIghTINg there are certain supplementary factors which need to be considered while planning lighting for the streets:
conFLIcT areaSconflict areas include all areas where road users typically travel
at speed exceeding 30 km/h and where motorised traffic streams intersect one another or overlap areas frequented by other types of road user. examples are crossroads and t-junctions, pedestrian crossings, cycle path crossings and roundabouts.
conflict areas require a lighting level at least as high as that of the approach road with the highest luminance. where the requirements of the road are generally low, conflict area lighting needs to be raised more than for roads with generally high requirements.
veHIcLeS parkeD aT SIDe oF roaDlighting, here, should aid orientation, and make people, vehicles,
boundaries and obstructions easier to distinguish. Besides, a good level of lighting with high vertical illuminance acts as a deterrent for burglars, car thieves and assailants.
the risk of accidents is reduced by arrangements of supplementary luminaires delivering higher illuminance.
coMpLexITY oF vISuaL FIeLDSthe impact of road lighting can be affected by visual elements in
the visual field, such as advertising boards, roadside kiosks, side trees etc., which may distract or disturb the road user while driving.
aMbIenT ILLuMInancevery bright surroundings, e.g. an illuminated sports facility in the
vicinity, can interfere with visual perception on the road, due to the contrast in lighting levels.
crIMe rISk In areathis is assessed as the ratio of the crime rate in the actual traffic
area to the crime rate in the wider area around it. Higher horizontal illuminance, together with high vertical
illuminance where the presence of pedestrians is pronounced, makes for better visual perception: suspicious movements are spotted farther away, details and the intentions of approaching figures are made out more clearly. fast and reliable identification gives us more time to prepare for danger and react accordingly. a higher lighting level gives residents a greater sense of security, which makes for a better neighbourhood and a better quality of life.
FacIaL recognITIon requIreMenTSpedestrian areas are accepted as “safe” where it is possible to
recognize approaching persons, anticipate their intentions and identify any potential threat.
peDeSTrIan croSSIngSHigh vertical illuminance is required for both the crossing itself
and the waiting areas at either side. this can be delivered by supplementary lighting.
•
•
•
•
•
•
•
•
•
•
CRITERIA FOR STREET lIghTINg AND lAMP SElECTION
crITerIa For SeLecTIng LaMpS:luminous efficacy of lamp – lumens / wattlamp life – service lifelumen maintenancecolour rendering index
crITerIa For SeLecTIng LuMInaIreS:economical Operation (Higher efficiency, proper photometric distribution)
lighting Quality and functionalitymechanical and electrical reliability
(ip protection, lamp-Ballast compatibility)
longer life (material selection, suitability in difficult environmental conditions)
maintenance friendly featureslight control (light pollution and light trespass)
lIghT COlOUR AND COlOUR RENDERINg OF lAMPS
light colour describes the colour of the light radiated by a lamp. colour rendering refers to the effect its light has on the appearance of coloured objects. in outdoor lighting, these two characteristics are of relatively minor importance. even so, it is still advisable to use lamps with good colour rendering properties so that discernible colour contrasts are perceived and information intake is thus maximized.
lamps with poor colour rendering properties, such as low- pressure sodium vapour lamps, are only suitable for pedestrian crossing, seaport and security lighting.
kEY CRITERIA FOR ThE ClASSIFICATION OF ROADS
main users of roadspeed of trafficdensity of trafficOther users and excluded usersintersection densitydifficulty of navigational task
••••
•••
•
••
•
•
••••••
Lighting for StreetS and PubLic SPaceS
40
Classification Type of Road Average Maintained Illuminance (Lux) Uniformity (Emin/Eavg)
grouP a1 high traffic speed and density 30 0.40
grouP a2 mixed traffic speed and density 15 0.40
grouP b1 considerable traffic – medium speed and density 08 0.33
grouP b2 light traffic and low density 04 0.33
Transverse variation of illuminance for A1 & A2 roads is 33% & for B1 & B2 it is 20% (Emin/Emax)
ROAD ClASSIFICATION – INDIAN PRACTICE
ROAD ClASSIFICATION – INTERNATIONAl PRACTICE
Situation/ Road Classification
Speed of Main User Main Users Other Allowed Users Excluded Users Application Examples
a1 > 60 Km/ hr motorised traffic - slow moving vehicles, cyclists, pedestrians
motorways, roadways for vehicles only
a2 > 60 Km/ hr motorised traffic slow moving vehicles cyclists, pedestrians major country roads with separate cycle roads and footpath
a3 > 60 Km/ hr motorised traffic slow moving vehicles, cyclists, pedestrians
- minor country roads
b1 30-60 Km/ hr motorised traffic, slow moving vehicles
cyclists, pedestrians - trunk roads, through roads, distributor roads
b2 30-60 Km/ hr motorised traffic, slow moving vehicles, cyclists
pedestrians - -
c1 5-30 Km/ hr cyclists pedestrians motorised traffic, slow moving vehicles
cycle paths/ cycle/ footpath
d1 5-30 Km/ hr motorised traffic, pedestrians
slow moving vehicles, cyclists
motorway service areas
d2 5-30 Km/ hr - slow moving vehicles, cyclists
- station forecourts, bus stations, car parks
d3 5-30 Km/ hr motorised traffic, cyclists
slow moving vehicles, pedestrians
- local access & residential streets with speed limit 30 Km/hr, mostly with footpaths
d4 5-30 Km/ hr motorised traffic, slow moving vehicles, cyclists, pedestrians
- - local access and residential streets with speed limit 30 Km/hr, mostly without footpaths
e1 walking speed pedestrians - motorised traffic, slow moving vehicles, cyclists
pedestrian shopping precincts
e2 walking speed - motorised traffic, cyclists
pedestrian & shopping precincts with loading & feeder traffic, home Zones
a1-a2-a3 classified roads b1-b2 classified roads c1 classified roads d1-d2-d3-d4 classified roads
Lighting for StreetS and PubLic SPaceS
4�
lIghTINg FOR ‘A’ CATEgORY ROADS
objecTIveHigher illumination and uniformityHigh intensity light sourcesno luminaires should be positioned on central verge on bends;
and closer spacing on bends for better visual guidance lighting should be geared up for visual comfort of motoristsroad sides, carriage way and potential hazards should be
clearly visiblespecial attention need to be given to roundabouts
LuMInaIre recoMMenDaTIonS:luminaires with High wattage Hid lamps should be used
- Hpsv lamps - mHl lamps
recommended wattages – 250 w/ 400 w Hpsv/mHlluminaires should have High ingress protection
- ip 65 and aboveluminaires should have sharper cut-Off
- low light pollution - low light trespass
lIghTINg FOR ‘B’ CATEgORY ROADS
objecTIveHigher illumination and uniformityHigh intensity light sourcesluminaires need to be more functional in naturelighting should be geared up more for visual comfort of
motorist as well as pedestrianroad sides, carriage way and possible hazards should be
clearly visibledecorative luminaires can be used on class B roads passing
through residential areas
LuMInaIre recoMMenDaTIonS: luminaires with High wattage Hid lamps should be used.
- Hpsv lamps - mHl lamps
recommended wattages – 150 / 250 w Hpsv/mHlluminaires should have High ingress protection
- ip 65 and aboveluminaires should have sharper cut-Off
- low light pollution - low light trespass
•••
••
•
•
••
•
••••
•
•
•
••
•
lIghTINg FOR ‘C’ AND ‘D’ CATEgORY ROADS
objecTIvecomparative lower illumination but higher uniformitymedium intensity light sourceslighting should be done considering visual
requirements of slow moving users sufficient illuminations on side footpaths/ roads for prevention of crimeroad sides, carriage way, possible hazards should be clearly visibleavoid light trespass in residential buildingsuse luminaires with urban design
LuMInaIre recoMMenDaTIonS:luminaires with medium wattage Hid lamps should be used
- Hpsv lamps - mHl lamps
recommended wattages – 70/ 150 w Hpsv/ mHlluminaires should have High ingress protection - ip 65 and aboveluminaires with vandal resistant design should be preferred
lIghTINg FOR TRAFFIC CAlM ROADS (E1/E2 CATEgORY)
lighting should be mainly for protection of walking pedestrianit should be provided to get better facial expression it should be with urban style lightingroad symbols should be more prominently displayedarchitectural and decorative aspects need to be considered
while selecting light fitting
•••
••••
•
•••
•••••
Lighting for StreetS and PubLic SPaceS
42
International Code Wattage (W) Length (mm) Diameter (mm) Lamp Holder Luminous Flux (Lumen)/ Intensity (Cd)
Colour Temp. (K) Colour RenderingIndex (CRI Group)
COMPACT FlUORESCENT lAMPS
tc-L 36 411 - 2G11 2750 6500 1b36 411 - 2G11 2900 4000 1b36 411 - 2G11 2900 3000 1b36 411 - 2G11 2900 2700 1b
FlUORESCENT lAMPS (TRI-BAND PhOSPhOR TYPE)
t8 36 1200 - G13 3250 6500 1b36 1200 - G13 3350 4000 1b
METAl hAlIDE lAMPS
hPSV (e) 70* 156 72 e27 5600 2000 20150 227 92 e40 14500 2000 20250 227 92 e40 27000 2000 25400 292 122 e40 48000 2000 25
hPSV (t) 150 211 47 e40 15000 2000 25250 257 47 e40 28000 2000 25400 283 47 e40 48000 2000 25
hQi-e/ MhL (e) 250 226 90 e40 19000 5200 1a400 285 120 e40 34000 4400 2b400 290 120 e40 26000 5500 1a
hQi-t/ MhL (t) 250 225 46 e40 20000 5200 1a400 273 46 e40 34000 4000 2b
400 285 62 e40 27000 5900 1b
hit-de/ hQi-tS 70 114.2 20 rx7s 5100 3000 2a70 114.2 20 rx7s 5700 4200 1b150 132 23 rx7s-24 11700 3000 2a150 132 23 rx7s-24 12000 4200 1b
hPMV 80 152 70 e27 3500 4200 48125 173 75 b-22d3 6200 4100 46125 173 75 e27 6200 4200 46250 227 90 e40 12700 4100 45400 290 120 e40 22000 3900 45
* 70 w hpsv (e) lamps are available with both internal starter as well as without internal starter
data provided is indicative. please refer lamp manufacturer’s data for lighting design calculations.
LamP information
Lighting for StreetS and PubLic SPaceS
branchaddreSSeS
NORTh
F-16, okhla Industrial area, phase I, new delhi - 110 020Tel: 011-41708121 - 30; Telefax: 011 - 41708121email: [email protected]
S.c.o. - 188-190, Sector - 34a, chandigarh - 160 022Tel: 0172-2661355/ 2660714/ 2667586; Fax: 0172 - 2648426email: [email protected]
e/149, Transport nagar,Lucknow kanpur road, lucknow - 226012Tel: 0522-2434734/ 2434352email: [email protected]
b-16/17, palsania complex, near T b Hospital, Subhash nagar Shopping centre, Jaipur - 320016Tel: 0141-2280014/ 2280289email: [email protected]
6-j, compound, Lasudia Mori, opp.police Station, indore - 457371Tel: 0731-2802463, 5023486email: [email protected]
western up/ uttarakhandHaridwaremail: [email protected]
SOUTh
no.139, 7th cross, n S palya, off: bannerghatta road, Bangalore - 560076Tel.: 080-41503260 - 68. Fax: 080 - 26781232email: [email protected]
Door no 33 & 34, pvg complex,gk Industrial estate, ganesh nagar, alapakkam chennai - 600116Tel: 044-32518016/ 24769653email: [email protected]
no.41, chokkampudur Main road, Sriram nagar, Telungupalayam post, coimbatore - 641039Tel: 0422-2477841/ 2478751 email: [email protected]
2nd Floor, kummancherry Hardwares building, opp. Hotel Sea gate, pathadipalam,South kalamassery, changampuzha nagar po, cochin - 682033Tel: 0484-4014556 - 57email: [email protected]
madurai (Tamilnadu)email: [email protected]
mangalore (karnataka)email: [email protected]
EAST
3, pretoria Street, 3rd Floor, Kolkata - 700071Tel: 033-22828489/ 9891; Fax: 033 - 22825912 email: [email protected]
WEST
Wilson House, 3rd Floor, nagardas road, andheri (e), mumbai - 400069Tel: 022 - 66941056 - 8, Fax: 022 - 66941060 email: [email protected]
203/ 204, Hindustan kohinoor complex, next to Hcc, LbS Marg, vikhroli - West, mumbai - 400083Tel: 022- 67213755email: [email protected]
CENTRAl
bhosale Heights, 1195/5, Fergusson college road, pune - 411005Tel: 020 - 25510583/ 25535081; Fax: 020 - 25535401email: [email protected]
a/210, Fairdeal House, opp. St. xavier’s Hostel, Swastik char rasta, navrangpura, ahmedabad - 380009Tel: 079 - 26400809/ 66051628email: [email protected]
311, pujer complex, Subhanpura, Baroda - 390023Tel: 0265 - 2395830/ 35/ 36/ 41/ 45; Fax: 0265 - 2331459email: [email protected]
103, Shriniketan apartments, nargunkar layout, Deo nagar, khamla road nagpur - 440015.Telefax: 0712 - 2233562email: [email protected]
plot no., 13 a/ 1, road no 9, IDa east Division nacharam, r. r. District,Hyderabad - 500074Tel: 040 - 27178906/ 27178905email: [email protected]
D. no. 1 - 99, Sirigudinagar, Yendada,visakhapatnam - 530045Tel: 0891 - 2720030/ 2528420email: [email protected]
cu4, advani business centre, neelkamal arcade,atmaram broker road, above Federal bank, panjim, Goa - 403001Tel: 0832 - 6650404email: [email protected]
c/o. Hindustan agenciesplot no. 135, Mancheswar Industrial estate,Bhubaneshwar - 751010Tel.: 0674 - 6450804email: [email protected]
rajkot email: [email protected]
khasra no.1470/81, p H no.106,ring road no.1, near jagdamba Mandir,opp Hotel new relax, kushalpur,raipur - 492001Tel: 0771 - 2426601/ 4056137email: [email protected]
buSIneSS oFFIce:
wipro Lighting5th Floor, godrej eternia - c,old pune - Mumbai road, Shivaji nagar,pune - 411 005Tel : +91.20.6609 8700Fax : +91.20.6609 8777email : [email protected]
regISTereD oFFIce:
wipro LimitedDoddakannelli, Sarajpur road,bangalore - 560 035Tel : +91.80.2844 0011Fax : +91.80.2844 0057
www.wiprolighting.comInnovation and Improvement are a way of life at Wipro. We reserve the right to modify the product without prior intimation.
WIPRO lIghTINg ADVANTAgE
innovative lighting solutions for streets & public spaces through:
• energy saving solutions with latest international technologies
• capability to service multi-locational accounts
• service commitment : more than 20 branches and over 150 dedicated stockists
• ease of contact through help-line (toll free) and website
• trustworthiness and reliability of wipro