Cover f - Surgical Devices and Advanced Wound Care products · TC-100 was designed to work beyond...

TC-100™

S C R E W

&

P L A T I N G

S Y S T E M

C A T A L O G

TC-100.Total Compatibility, 100%.

Quality.Familiarity.

No worries about biomechanics or double inventory.

TC-100 was designed to work beyond the industry standard, providing a full range of components, increased cost effectiveness,

and seamless integration with existing inventories.

Use this easy-to-follow reference catalog to find:• Pictures of parts for easy reference• Sizes, lengths and diameters• Primary uses for each plate• Catalog numbers• Set listings• Indexing by catalog number or part name• Removable Screw and Drill Bit Quick Reference Chart

When it comes to choices, quality, cost savings and performance, Smith & Nephew delivers.

Screw & P lat ing System

Working Beyond the Standard

TC -100™

Warning: This device is not approved for screw attachment or fixation to theposterior elements (pedicles) of the cervical, thoracic or lumbar spine.

TC-100 is a trademark of Smith & Nephew, Inc. TC-100 implants bear the CE mark, indicating their conformance with applicable European quality standards.

SCREWS

TC-100

SCREWS

1.5 mm Cortex Screws, Hexagonal Head

M I N I S C R E W S

1-1

Self-Tapping LengthCatalog No. Catalog No. (mm)7116-1506 7114-9106 67116-1507 7114-9107 77116-1508 7114-9108 87116-1509 7114-9109 97116-1510 7114-9110 107116-1511 7114-9111 117116-1512 7114-9112 127116-1514 7114-9114 147116-1516 7114-9116 167116-1518 7114-9118 187116-1520 7114-9120 20N/A 7114-9122 22N/A 7114-9124 24

Self-Tapping LengthCatalog No. Catalog No. (mm)7116-1606 7114-9006 67116-1607 7114-9007 77116-1608 7114-9008 87116-1609 7114-9009 97116-1610 7114-9010 107116-1611 7114-9011 117116-1612 7114-9012 127116-1614 7114-9014 147116-1616 7114-9016 167116-1618 7114-9018 187116-1620 7114-9020 20N/A 7114-9022 22N/A 7114-9024 24

Thread diameter 1.5 mmCore diameter 1.0 mmThread pitch 0.5 mmScrew head diameter 3.0 mm

Cat. No.Tap 1.5 mm 7117-0017Pilot drill 1.1 mm 7117-0001Drill bit for gliding hole 1.5 mm 7117-0003Screwdriver shaft, hex 1.5 mm 7117-0036Screwdriver shaft, cruciate 7117-0037Screwdriver handle, mini, QC 7117-0013Self-holder for screwdriver, 1.5 mm screws 7117-0035Depth gauge, 38 mm 7117-0038Washer, 4.5 mm 7114-3104

1.5 mm Cortex Screws, Cruciate Head

0.5Pitch

CruciformRecessDrive

3.0Head

Diameter

1.5Hex Drive

1.0Core

Diameter

The length of the screw is measured from the top of the head to the tip of the screw. Generally, the last few digits of a screw’scatalog number indicate its overall length (i.e., the 1.5 mm diameter x 10 mm length cortex screw has a catalog number of 7116-1510. The catalog number for the same 1.5 mm cortex screw, with a length of 20 mm, is 7116-1520). Self-tappingscrews (2.7 mm, 3.5 mm and 4.5 mm only) are marked with laser etching on the heads. Conforms to ISO 5835, 6475 and5832. Produced from 316LVM stainless steel. WARNING: These devices are not approved for screw attachment orfixation to the posterior elements (pedicles) of the cervical, thoracic, or lumbar spine. See package insertsfor labeling limitations.

1 .5 mm Cortex Screws — Hexagonal or Cruciate HeadUsed to fix fracture fragments in the phalanges, metacarpals and small bones in the foot. These screws may be used independently as lag screws or through a plate.

1.2Cruciate

1.6Hex

M I N I S C R E W S

1-2

Self-Tapping LengthCatalog No. Catalog No. (mm)7116-2206** 7114-9306 67116-2008 7114-9308 87116-2010 7114-9310 107116-2012 7114-9312 127116-2014 7114-9314 147116-2016 7114-9316 167116-2018 7114-9318 187116-2020 7114-9320 207116-2022 7114-9322 227116-2024 7114-9324 247116-2026 7114-9326 267116-2028 7114-9328 287116-2030 7114-9330 307116-2032 7114-9332 327116-2034* 7114-9334 347116-2036* 7114-9336 367116-2038* 7114-9338 38

Thread diameter 2.0 mmCore diameter 1.3 mmThread pitch 0.6 mmHex screw head diameter 4.0 mmCruciate screw head diameter 3.4 mm

Cat. No.Tap 2.0 mm 7117-0019Pilot drill 1.5 mm 7117-0003Drill bit for gliding hole 2.0 mm 7117-0005Screwdriver shaft, hex 1.5 mm 7117-0036Screwdriver handle, mini, QC 7117-0013Self-holder for screwdriver, 2.0 mm screws 7117-0034Depth gauge, 38 mm 7117-0038Screwdriver shaft, cruciate 7117-0037Washer, 4.5 mm 7114-3104

*Sterile**Special part number, out of sequence

*Sterile

2.0 mm Cortex Screws — Hexagonal or Cruciate HeadUsed to fix fracture fragments in the proximal and middle phalanges and metacarpals and for foot surgery.

0.6Pitch

1.3Core

Diameter

1.5Hex Drive

Self-Tapping LengthCatalog No. Catalog No. (mm)7116-2106 7114-9206 67116-2108 7114-9208 87116-2110 7114-9210 107116-2112 7114-9212 127116-2114 7114-9214 147116-2116 7114-9216 167116-2118 7114-9218 187116-2120 7114-9220 207116-2122 7114-9222 227116-2124 7114-9224 247116-2126 7114-9226 267116-2128 7114-9228 287116-2130 7114-9230 307116-2132 7114-9232 327116-2134* 7114-9234 347116-2136* 7114-9236 367116-2138* 7114-9238 38

2.0 mm Cortex Screws, Hexagonal Head 2.0 mm Cortex Screws, Cruciate Head

1.55Cruciate

1.9Hex

3.4Cruciate Head

Diameter

4.0Hex HeadDiameter

CruciformRecess Drive

M I N I S C R E W S

1-3


Cat. No.Tap 2.7 mm 7117-0021Pilot drill 2.0 mm 7117-0005Drill bit for gliding hole 2.7 mm 7117-0007Screwdriver, hex 2.5 mm 7117-0029Self-holder sleeve 7117-0031Self-holder sleeve 7117-0167Depth gauge, 50 mm 7117-0039Washer, 7.0 mm 7114-3107

1.0Pitch

2.4Head

1.9Core

Diameter

2.5Hex Drive

5.0Head

Diameter

2.7 mm Cortex ScrewsUsed in the metacarpal and metatarsal bones and also in certain indications in the radius and ulna.

2.7 mm Cortex Screws

*Sterile

Self-Tapping LengthCatalog No. Catalog No. (mm)7122-0006 7114-9406 67122-0008 7114-9408 87122-0010 7114-9410 107122-0012 7114-9412 127122-0014 7114-9414 147122-0016 7114-9416 167122-0018 7114-9418 187122-0020 7114-9420 207122-0022 7114-9422 227122-0024 7114-9424 247122-0026 7114-9426 267122-0028 7114-9428 287122-0030 7114-9430 307122-0032 7114-9432 327122-0034 7114-9434 347122-0036 7114-9436 367122-0038 7114-9438 387122-0040 7114-9440 407122-0045* 7114-9445 457122-0050* 7114-9450 507122-0055* 7114-9455 55

1-4

S M A L L S C R E W S

Self-Tapping LengthCatalog No. Catalog No. (mm)7122-2010 7114-9510 107122-2012 7114-9512 127122-2014 7114-9514 147122-2016 7114-9516 167122-2018 7114-9518 187122-2020 7114-9520 207122-2022 7114-9522 227122-2024 7114-9524 247122-2026 7114-9526 267122-2028 7114-9528 287122-2030 7114-9530 307122-2032 7114-9532 327122-2034 7114-9534 347122-2036 7114-9536 367122-2038 7114-9538 387122-2040 7114-9540 407122-2045 7114-9545 457122-2050 7114-9550 507122-2055 7114-9555 + 557122-2060 7114-9560 + 607122-2065 7114-9565 + 657122-2070 7114-9570 + 707122-2075 7114-9575 + 757122-2080 7114-9580 + 80

3.5 mm Cortex Screws 3.5 mm Shaft Screws, Self-Tapping, Sterile

Thread diameter 3.5 mmCore diameter 2.4 mmShaft diameter (shaft screws only) 3.5 mmThread pitch 1.25 mmScrew head diameter 6.0 mm

Cat. No.Tap 3.5 mm 7117-0077Pilot drill 2.5 mm 7117-0071Drill bit for gliding hole 3.5 mm 7117-0073Screwdriver hex 2.5 mm 7117-0029Washer, 7.0 mm 7114-3107

Self-Tapping LengthCatalog No. Catalog No. (mm)7122-2085 7114-9585 + 857122-2090 7114-9590 + 907122-2095 7114-9595 + 95 7122-2100 7114-9600 + 1007122-2105 7114-9605 + 1057122-2110 7114-9610 + 1107122-2115 7114-9615 *+ 1157122-2120 7114-9620 *+ 1207122-2125 7114-9625 *+ 1257122-2130 7114-9630 *+ 130

ThreadLength Length

Catalog No. (mm) (mm)7122-5716 16 67122-5718 18 67122-5720 20 67122-5722 22 67122-5724 24 107122-5726 26 107122-5728 28 107122-5730 30 107122-5732 32 127122-5734 34 127122-5736 36 127122-5738 38 127122-5740 40 127122-5745 45 157122-5750 50 15

3.5 mm Cortex ScrewsUsed for interfragmentary compression (lag technique), plate fixation or both. The 55 mm and longer self-tapping screws have a deeper hex recess for better control in pelvic applications.

3.5 mm Shaf t ScrewsA stronger screw for lag techniques.

2.4Core

Diameter

*For 55 mm to 130 mm length screws, head height is 3.25 mm.

6.0Head

Diameter

2.5Hex Drive

1.25Pitch

1.25Pitch

2.6Head*

2.6Head

*Sterile+Deep hex head

4.0 mm Cancellous Screws, Fully Threaded

S M A L L S C R E W S

1-5

4.0 mm Cortex Screws, Fu l ly ThreadedUsed for securing plates to the metaphysis.

4.0 mm Cortex Screws, Part ia l ly ThreadedUsed as a lag screw for fractures in the ankle and wrist. The smooth shaft beneath the head eliminates the need to drill a gliding hole. The same specifications apply to these screws as the fully threaded version.

Thread diameter 4.0 mmCore diameter 1.9 mmShaft diameter 2.4 mmThread pitch 1.75 mmScrew head diameter 6.0 mm

Cat. No.Tap 4.0 mm 7117-0079Pilot drill 2.5 mm 7117-0071Screwdriver 2.5 mm 7117-0029Washer, 7.0 mm 7114-3107

4.0 mm Cancellous Screws, Partially Threaded

Catalog No. Length (mm)7122-3210 107122-3212 127122-3214 147122-3216 167122-3218 187122-3220 207122-3222 227122-3224 247122-3226 267122-3228 287122-3230 307122-3235 357122-3240 407122-3245 457122-3250 507122-3255 557122-3260 607122-3265 657122-3270 707122-3275 757122-3280 807122-3285 857122-3290 907122-3295 957122-3300 100

Catalog No. Length (mm)7122-3010 107122-3012 127122-3014 147122-3016 167122-3018 187122-3020 207122-3022 227122-3024 247122-3026 267122-3028 287122-3030 307122-3032 327122-3035 357122-3036 367122-3040 407122-3045 457122-3050 507122-3055 557122-3060 607122-3065 657122-3070 707122-3075 757122-3080 807122-3085 857122-3090 907122-3095 957122-3100 100

1.75Pitch

2.4Shaft

1.9Core

Diameter

2.5Hex Drive

6.0Head

Diameter

2.9Head

L A R G E S C R E W S

1-6


Cat. No.Tap 4.5 mm 7117-0119Pilot drill 3.2 mm 7117-0111Drill bit for gliding hole 4.5 mm 7117-0113Screwdriver, hex 3.5 mm 7117-0133Washer, 10.0 mm or 13.0 mm 7114-3110,

7114-3113

4.5 mm Cortex Screws

4.5 mm Cortex ScrewsUsed for plate fixation and for interfragmentary compression (lag screws).

1.75Pitch

3.0Core Diameter

3.5Hex Drive

8.0Head

Diameter

4.6Head

Self-Tapping LengthCatalog No. Catalog No. (mm)7122-5060 7114-9760 607122-5062 7114-9762 627122-5064 7114-9764 647122-5066 7114-9766 667122-5068 7114-9768 687122-5070 7114-9770 707122-5072 7114-9772 727122-5076 7114-9776 767122-5080 7114-9780 807122-5085 7114-9785 857122-5090 7114-9790 907122-5095 7114-9795 957122-5100 7114-9800 1007122-5105 7114-9805 1057122-5110 7114-9810 1107122-5115 7114-9815 1157122-5120 7114-9820 1207122-5125 7114-9825 1257122-5130 7114-9830 1307122-5135 7114-9835 1357122-5140 7114-9840 1407122-5145 7114-9845 145

Self-Tapping LengthCatalog No. Catalog No. (mm)7122-5014 7114-9714 147122-5016 7114-9716 167122-5018 7114-9718 187122-5020 7114-9720 207122-5022 7114-9722 227122-5024 7114-9724 247122-5026 7114-9726 267122-5028 7114-9728 287122-5030 7114-9730 307122-5032 7114-9732 327122-5034 7114-9734 347122-5036 7114-9736 367122-5038 7114-9738 387122-5040 7114-9740 407122-5042 7114-9742 427122-5044 7114-9744 447122-5046 7114-9746 467122-5048 7114-9748 487122-5050 7114-9750 507122-5052 7114-9752 527122-5054 7114-9754 547122-5056 7114-9756 567122-5058 7114-9758 58


1-7

4.5 mm Malleolar ScrewsThread diameter 4.5 mmCore diameter 3.0 mmShaft diameter 3.0 mmThread pitch 1.75 mmScrew head diameter 8.0 mm

4.5 mm Shaft ScrewsThread diameter 4.5 mmCore diameter 3.0 mmShaft diameter 4.5 mmThread pitch 1.75 mmScrew head diameter 8.0 mm

ThreadLength Length

Catalog No. (mm) (mm)7122-5225 25 127122-5230 30 157122-5235 35 187122-5240 40 207122-5245 45 227122-5250 50 247122-5255 55 267122-5260 60 287122-5265 65 307122-5270 70 32

ThreadLength Length

Catalog No. (mm) (mm)7122-5822 22 127122-5824 24 127122-5826 26 127122-5828 28 127122-5830 30 127122-5832 32 127122-5834 34 127122-5836 36 127122-5838 38 127122-5840 40 127122-5842 42 127122-5844 44 127122-5846 46 127122-5848 48 127122-5850 50 12

ThreadLength Length

Catalog No. (mm) (mm)7122-5852 52 157122-5854 54 157122-5856 56 157122-5858 58 157122-5860 60 157122-5864 64 187122-5868 68 187122-5872 72 187122-5876 76 187122-5880 80 187122-5885 85 227122-5890 90 227122-5895 95 267122-5900 100 26

4.5 mm Shaft Screws, Self-Tapping, Sterile4.5 mm Malleolar Screws, Sterile

4.5 mm Mal leo lar Screws, Ster i leTrocar point for self-drilling applications. Used to fix fragments in the metaphysis, malleolus, distal humerus and lesser trochanter.

4.5 mm Shaf t Screws, Se l f-Tapping, Ster i leUsed as a lag screw in diaphyseal bone.

8.0Head

Diameter

3.5Hex Drive

1.75Pitch

3.0Shaft

5.0Malleolar

Head

3.0Core Diameter

1.75Pitch

4.5Shaft

3.0Core Diameter

8.0Head

Diameter

3.5Hex Drive

4.6ShaftScrewHead

Thread diameter 6.5 mmShaft diameter 4.5 mmCore diameter 3.0 mmThread pitch 2.75 mmScrew head diameter 8.0 mm

Cat. No.Tap 6.5 mm 7117-0121Pilot drill 3.2 mm 7117-0111Pilot drill (hard bone) 4.5 mm 7117-0113Screwdriver, hex 3.5 mm 7117-0133Washer, 13 mm 7114-3113


1-8

6.5 mm Cancellous Screws, 16 mm Thread Length

6.5 mm Cancel lous ScrewsThe partially threaded screws are used as lag screws in the epiphyseal and metaphyseal areas, where the bone iscancellous and the cortex is thin. Two thread lengths, 16 mm and 32 mm, accommodate different sizes of bonefragments. The fully threaded screws may be used with plates and only the last one or two holes at each end of a 4.5 mm plate will accept these screws. If the bone is very hard, a pilot hole should be drilled with a 4.5 mm drill bit.

LengthCatalog No. (mm)7122-6030 307122-6035 357122-6040 407122-6045 457122-6050 507122-6055 557122-6060 607122-6065 657122-6070 707122-6075 757122-6080 807122-6085 857122-6090 907122-6095 957122-6100 1007122-6105 1057122-6110 1107122-6115 1157122-6120 1207122-6125 1257122-6130 1307122-6135 1357122-6140 1407122-6145 1457122-6150 150

2.75Pitch

4.5Shaft

3.0Core Diameter

3.5Hex Drive

8.0Head

Diameter

4.6Head

Thread diameter 6.5 mmShaft diameter 4.5 mmCore diameter 3.0 mmThread pitch 2.75 mmScrew head diameter 8.0 mm

Cat. No.Tap 6.5 mm 7117-0121Pilot drill 3.2 mm 7117-0111Pilot drill (hard bone) 4.5 mm 7117-0113Screwdriver, hex 3.5 mm 7117-0133Washer, 13 mm 7114-3113


1-9

6.5 mm Cancellous Screws, 32 mm Thread Length

LengthCatalog No. (mm)7122-9025 257122-9030 307122-9035 357122-9040 407122-9045 457122-9050 507122-9055 557122-9060 607122-9065 657122-9070 707122-9075 757122-9080 807122-9085 857122-9090 907122-9095 957122-9100 1007122-9105 1057122-9110 1107122-9115 1157122-9120 1207122-9125 1257122-9130 1307122-9135 1357122-9140 1407122-9145 1457122-9150 150

LengthCatalog No. (mm)7122-8045 457122-8050 507122-8055 557122-8060 607122-8065 657122-8070 707122-8075 757122-8080 807122-8085 857122-8090 907122-8095 957122-8100 1007122-8105 1057122-8110 1107122-8115 1157122-8120 1207122-8125 1257122-8130 1307122-8135 1357122-8140 1407122-8145 1457122-8150 150

6.5 mm Cancel lous Screws (cont inued)

6.5 mm Cancellous Screws, Fully Threaded

2.75Pitch

4.5Shaft

3.0Core Diameter

3.5Hex Drive

8.0Head

Diameter

4.6Head

TC-100

PLATES

PLATES

M I N I P L A T E SPrimary uses kindly provided by Kenneth J. Koval, M.D.Produced from 316LVM Stainless Steel.

1 .5 mm Stra ight P latePrimary uses: Metatarsal, metacarpal and phalanx fixationScrew size: 1.5 mm cortex

1 .5 mm T-PlatesPrimary uses: Metatarsal, metacarpal and phalanx fixationScrew size: 1.5 mm cortex

1 .5 mm H-PlatePrimary uses: Metatarsal and metacarpal fixationScrew size: 1.5 mm cortex

Length Catalog No. (mm) Holes7114-5020 100 20

Catalog No. Holes Description7114-5026 7 Left7114-5028 7 Right

1 .5 mm Condylar P lates Primary use: Metacarpal osteotomiesScrew size: 1.5 mm cortex

Thickness: 0.9 mm

Thickness: 0.9 mmWidth: 3.8 mmLength: 49 mm

Thickness: 0.9 mmWidth: 3.8 mmHole Spacing: 5 mm

Thickness: 0.9 mmWidth: 3.5 mmLength: 36 mm

Holes in Holes inCatalog No. Head Shaft7114-5022 3 97114-5024 4 9

Catalog No. Holes7114-5030 4

2-1

M I N I P L A T E S

2.0 mm Stra ight P latesPrimary use: Phalanx fixationScrew size: 2.0 mm cortex

2.0 mm T-Plates, 9 Ho lePrimary uses: Proximal phalanx fixation and osteotomiesScrew size: 2.0 mm cortex

2.0 mm T-Plate, 2 Ho lePrimary uses: Metatarsal, metacarpal and phalanx fixation and osteotomiesScrew size: 2.0 mm cortex

Length Catalog No. (mm) Holes7114-6020 17 37114-6022 23 47114-6024 29 57114-6026 35 67114-6028 100 20

Holes inCatalog No. Shaft Description7114-6036 2 Oblique Right7114-6038 2 Oblique Left7114-6044 2 Right7114-6046 2 Left

2.0 mm L-P lates Primary uses: Metatarsal, metacarpal and phalanx fixation and osteotomiesScrew size: 2.0 mm cortex

Thickness: 0.9 mmWidth: 5 mmHole Spacing: 6 mm



FOR 20 HOLE PLATEThickness: 1.2 mmWidth: 5 mmHole Spacing: 5 mm


Holes in Holes inCatalog No. Head Shaft7114-6030 3 97114-6032 4 9

Holes in Holes inCatalog No. Head Shaft7114-6034 2 2

2-2

2-3

M I N I P L A T E S

2.0 mm H-PlatePrimary uses: Metacarpal and phalanx fixationScrew size: 2.0 mm cortex

2.0 mm Condylar P latesPrimary use: Metacarpal osteotomiesScrew size: 2.0 mm cortex

Quarter-Tubular P latesPrimary uses: Metatarsal, metacarpal fixation and osteotomiesScrew size: 2.7 mm cortex

Catalog No. Holes7114-6048 4

Catalog No. Holes7114-7012 7Mult i fragment P late

Primary uses: Metatarsal and metacarpal fixationScrew size: 2.7 mm cortex

Thickness: 1 mmWidth: 7 mmHole Spacing: 8 mm

Thickness: 1.2 mmWidth: 5 mmLength: 39 mm

Thickness: 1.2 mm

Thickness: 0.9 mm


Length Catalog No. (mm) Holes7114-8003 23 37114-8004 31 47114-8005 39 57114-8006 47 67114-8007 55 77114-8008 63 8

2-4

M I N I P L A T E S

2.7 mm Smal l Compression P latesSterile

Primary uses: Metatarsal, metacarpal and phalanx fixation and osteotomiesScrew size: 2.7 mm cortex

2.7 mm L-P latesPrimary uses: Metatarsal, metacarpal and phalanx fixation and osteotomiesScrew size: 2.7 mm cortex

2.7 mm T-PlatePrimary uses: Metatarsal, metacarpal and phalanx fixation and osteotomiesScrew size: 2.7 mm cortex

Length Catalog No. (mm) Holes7114-1900 20 27114-1902 26 27114-1904 36 47114-1905 44 57114-1906 52 67114-1907 60 77114-1908 68 87114-1909 76 97114-1910 84 107114-1912 100 12

Holes Catalog No. in Shaft Description7114-7003 3 Left7114-7001 3 Right7114-7002 3 Oblique Left7114-7004 3 Oblique Right


Holes Holes Catalog No. in Head in Shaft7114-7006 2 3

2.7 mm Condylar P latesPrimary uses: Metacarpal and distal radius osteotomiesScrew size: 2.7 mm cortex

Thickness: 1.2 mmWidth: 7 mmHole Spacing: 8 mmLength: 32 mm

Thickness: 1.2 mmWidth: 7 mmHole Spacing: 8 mmLength: 35 mm

Thickness: 2 mm (2-6 hole)2.5 mm (7-12 hole)

Width: 8 mm

Thickness: 1.4 mmWidth: 7 mmLength: 57 mm

2-5

S M A L L P L A T E S3.5 mm Smal l Compression P latesPrimary uses: Radius, ulna, distal humerus and fibula fixationand forearm osteotomiesScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

One-Third Tubular P lates with Co l larPrimary uses: Distal ulna and fibula fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

Length Holes in Holes inCatalog No. (mm) Head Shaft7114-0403 50 3 3 7114-0404 56 4 4 7114-0405 67 3 5 7114-0406 78 4 6

Length Holes in Holes inCatalog No. (mm) Head Shaft7114-0503 53 3 3

7114-0504 63 3 4

7114-0505 73 3 5

Thickness (Shaft): 1.5 mmWidth (Shaft): 10 mm

Length Catalog No. (mm) Holes7114-0202 25 27114-0203 37 37114-0204 49 47114-0205 61 57114-0206 73 67114-0207 85 77114-0208 97 87114-0209 109 97114-0210 121 107114-0212 145 127114-0214 169 147114-0216 194 167114-0218 217 187114-0220 242 207114-0222 265 22

Thickness: 3.4 mmWidth: 10 mmHole Spacing: 12 mm & 16 mm

Thickness: 1.1 mmWidth: 9 mmHole Spacing: 12 mm & 16 mm

Thickness (Shaft): 1.2 mmWidth (Shaft):

10 mm for 3 Hole Head11 mm for 4 Hole Head

Length Catalog No. (mm) Holes7114-0302 25 27114-0303 37 37114-0304 49 47114-0305 61 57114-0306 73 67114-0307 85 77114-0308 97 87114-0309 109 97114-0310 121 107114-0312 145 12

Smal l T-P lates, Ob l iquePrimary uses: Distal radius fixation and osteotomiesScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

Smal l T-P lates, R ight AnglePrimary uses: Distal radius and tibial plateau fixation and distal radius osteotomiesScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

S M A L L P L A T E S

Cloverleaf P latesPrimary uses: Distal tibial and proximal humerus fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

Thickness (Shaft): 2 mmThickness (Head): 1.2 mmWidth (Shaft): 15 mm

Length Holes inCatalog No. (mm) Shaft7114-0603 88 37114-0604 104 47114-0625* 120 57114-0626* 136 67114-0627* 152 77114-0628* 168 87114-0629* 184 9

*Sterile

2-6

2-7

C A L C A N E A L P L A T E S

Calcaneal P lates with TemplatesSterileAlso referred to as the Galveston Plate

Primary use: Calcaneus fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

Calcaneal P lates with TemplatesSterile

Primary use: Calcaneus fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

Catalog No. Length7114-4010 60 mm7114-4011 70 mm

Catalog No. Holes7114-4012 991-3886* 891-1123* 6

*Special Order

Thickness: 1.2 mm

Thickness: 1.2 mm

L A R G E F R A G M E N T S T R A I G H T P L A T E S

Semi-Tubular P latesPrimary uses: Additional plate on proximal or distal tibiaScrew sizes: 4.5 mm cortex, 6.5 mm cancellous, 4.5 mm malleolar and 4.5 mm shaft screws

Thickness: 1 mmWidth: 11.7 mmHole Spacing: 16 mm & 26 mm

Thickness: 5 mmWidth: 16 mmHole Spacing: 16 mm & 25 mm

Thickness: 4 mmWidth: 12 mmHole Spacing: 16 mm & 25 mm

4.5 mm Broad Compression P latesPrimary uses: Femur or humerus shaft fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, 6.5 mm cancellous in outside holes

4.5 mm Narrow Compression P latesPrimary uses: Tibia shaft or small humerus shaft fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, 6.5 mm cancellous in outside holes

Catalog No. Length (mm) Holes7114-1302 39 27114-1303 55 37114-1304 71 47114-1305 87 57114-1306 103 67114-1307 119 77114-1308 135 87114-1309 151 97114-1310 167 107114-1311 183 117114-1312 199 12

Catalog No. Length (mm) Holes7114-1206 103 67114-1207 119 77114-1208 135 87114-1209 151 97114-1210 167 107114-1212 199 127114-1214 231 147114-1216 263 167114-1218 295 187114-1220 326 207114-1222 358 227114-1224 390 247114-1226 423 26

Catalog No. Length (mm) Holes7114-1402 39 27114-1403 55 37114-1404 71 47114-1405 87 57114-1406 103 67114-1407 119 77114-1408 135 87114-1409 151 97114-1410 167 107114-1411 183 117114-1412 199 127114-1413 215 137114-1414 231 147114-1415 247 157114-1416 263 167114-1418 295 187114-1420 326 207114-1422 358 227114-1424 390 24

2-8

L A R G E P L A T E S

T-Buttress P latesPrimary use: Lateral tibial plateau fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, and 6.5 mm cancellous in head holes

Length Holes inCatalog No. (mm) Shaft7114-1603 68 37114-1604 84 47114-1605 100 57114-1606 116 67114-1608 148 8

Length Holes inCatalog No. (mm) Shaft Description7114-0804 86 4 Angled Left for

Right Tibia 7114-0904 86 4 Angled Right for

Left Tibia

Lateral T ib ia l Head Buttress P lates Primary uses: Lateral tibial plateau or proximal tibia fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, and 6.5 mm cancellous in head holes

Length Holes inCatalog No. (mm) Shaft Description7114-1003* 87 3 Right

7114-1103* 87 3 Left

7114-1005 118 5 Right

7114-1105 118 5 Left

7114-1007 149 7 Right

7114-1107 149 7 Left

7114-1009 181 9 Right

7114-1109 181 9 Left

7114-1011 214 11 Right

7114-1111 214 11 Left

7114-1013 246 13 Right

7114-1113 246 13 Left

Thickness: 2 mmWidth (Shaft): 16 mm

Thickness (Shaft): 4 mmWidth (Shaft): 14 mmHole Spacing: 16 mm



Length Holes inCatalog No. (mm) Shaft7114-0704 80 47114-0705 96 57114-0706 112 6

Large T-P latesPrimary uses: Proximal humerus or medial tibial plateau fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, and 6.5 mm cancellous in head holes

L-Buttress P latesPrimary use: Lateral tibial plateau fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, and 6.5 mm cancellous in head holes

*Sterile 2-9

L A R G E S P E C I A LT Y P L A T E S

Hook P latePrimary use: Greater trochanter fixation associated with total hip arthroplastyScrew sizes: 4.5 mm cortex, 4.5 mm shaft screws and 6.5 mm cancellous in head holes

Cobra Head P latesPrimary use: Hip fusionScrew sizes: 4.5 mm cortex, 4.5 mm shaft screws and 6.5 mm cancellous in head holes

Length Holes inCatalog No. (mm) Shaft7114-1505 100 57114-1506 120 6

Length Holes inCatalog No. (mm) Shaft7114-1704 123 4

Length Holes inCatalog No. (mm) Shaft7114-1808 170 87114-1809 186 97114-1810 202 107114-1811 218 11

Length Holes inCatalog No. (mm) Shaft Description7114-2007 158 7 Left 7114-2107 158 7 Right 7114-2009 190 9 Left 7114-2109 190 9 Right7114-2011 221 11 Left 7114-2111 221 11 Right7114-2013 253 13 Left 7114-2113 253 13 Right 7114-2015 285 15 Left7114-2115 285 15 Right

Thickness (Shaft): 5.8 mmWidth (Shaft): 16.2 mm

Thickness (Shaft): 5 mmWidth (Shaft): 16 mm

Thickness (Shaft): 2 mmWidth (Head): 34 mm

Thickness (Shaft): 4.8 mmWidth (Shaft): 16 mmHole Spacing: 16 mm

Spoon P latesPrimary use: Distal tibia fixationScrew sizes: 4.5 mm cortex, 4.5 mm malleolar and 4.5 mm shaft screws, and 6.5 mm cancellous in head holes

Condylar Buttress P latesPrimary use: Comminuted intra-articular distal femur fixationScrew sizes: 4.5 mm cortex, 4.5 mm shaft screws and 6.5 mm cancellous in head holes

2-10

R E C O N S T R U C T I O N P L A T E S

4.5 mm Reconstruct ion P latesPrimary uses: SI joint fusion, symphyseal fusionsScrew sizes: 4.5 mm cortex, 4.5 mm malleolar, 4.5 mm shaft screws and 6.5 mm cancellous

Catalog No. Length (mm) Holes7114-0003 45 37114-0004 61 47114-0005 77 57114-0006 93 67114-0007 109 77114-0008 125 87114-0009 141 97114-0010 157 107114-0011 173 117114-0012 189 127114-0013 205 137114-0014 221 147114-0015 237 157114-0016 253 16

Catalog No. Length (mm) Holes7114-0104 46 47114-0105 58 57114-0106 70 67114-0107 82 77114-0108 94 87114-0109 106 97114-0110 118 107114-0111 130 117114-0112 142 127114-0113 154 137114-0114 166 147114-0115 178 157114-0116 190 167114-0118 214 187114-0120 238 207114-0122 263 22

Catalog No. Length (mm) Holes7114-0606 70 67114-0608 94 87114-0610 118 107114-0612 142 127114-0614 166 147114-0616 190 167114-0618 214 18




3.5 mm Reconstruct ion P latesPrimary uses: Acetabular, SI joint, pelvic, distal humerus,olecranon and fibula fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

3.5 mm Curved Reconstruct ion P latesPrimary use: Acetabular fixationScrew sizes: 3.5 mm cortex and 4.0 mm cancellous

2-11

2-12

B L A D E P L A T E S

BladeLength Displacement Height

Catalog No. (mm) (mm) (mm)7122-5610 30 5 497122-5611 35 5 54

Chi ld Osteotomy, 3 Ho lesPrimary use: Proximal femoral osteotomiesScrew size: 4.5 mm cortex

BladeAngle Length Displacement

Catalog No. (degrees) (mm) (mm)7122-5620 80 35 87122-5621 80 45 87122-5622 90 35 87122-5623 90 45 87122-5624 100 35 87122-5625 100 45 8

BladeLength Displacement

Catalog No. (mm) (mm)7122-5600 25 77122-5601 25 127122-5602 32 77122-5603 32 12

90° Infant Osteotomy, 3 Ho lesPrimary use: Proximal femoral osteotomiesScrew size: 3.5 mm cortex

Height: 46.5 mmShaft: 10.5 mm x 2 mmT-Blade: 2 mm x 8 mmHole Spacing: 10 mm

Height: 74.5 mmShaft: 11.5 mm x 3.9 mmT-Blade: 4.5 mm x 11.5 mmHole Spacing: 16 mm

115° Bifurcated Infant B lade P latePrimary use: Proximal femoral osteotomiesScrew size: 3.5 mm cortex

Shaft: 10.9 mm x 1.1 mm

2-13


130° Angled B lade P late , Smal l StaturePrimary use: Proximal femoral osteotomiesScrew size: 4.5 mm cortex

Blade ShaftLength Length

Catalog No. (mm) (mm) Holes7122-5430 40 92 57122-5431 50 92 57122-5432 60 92 57122-5433 70 92 57122-5434 40 124 77122-5435 50 124 77122-5436 60 124 77122-5437 70 124 77122-5438 40 156 97122-5439 50 156 97122-5440 60 156 97122-5441 70 156 9


Catalog No. (mm) (mm) Holes7122-5530 50 60 47122-5531 60 60 47122-5532 70 60 47122-5533 80 60 47122-5534 50 104 67122-5535 60 104 67122-5536 70 104 67122-5537 80 104 67122-5538 50 152 97122-5539 60 152 97122-5540 70 152 97122-5541 80 152 9

Shaft: 14 mm x 4.5 mmT-Blade: 5.1 mm x 11.7 mmHole Spacing: 16 mm

Shaft: 14 mm x 4.5 mmT-Blade: 5.1 mm x 11.7 mmHole Spacing: 13 mm and 16 mm

95° Condylar P late , Smal l StaturePrimary uses: Subtrochanteric fixation, proximaland distal femoral osteotomiesScrew sizes: 4.5 mm cortex and 6.5 mm cancellous

Adult Osteotomy, 4 HolesPrimary use: Proximal femoralosteotomiesScrew size: 4.5 mm cortex


Catalog No. (degrees) (mm) (mm)7122-5320 90 40 107122-5321 90 50 107122-5322 90 55 107122-5323 90 60 107122-5324 90 65 107122-5325 90 70 107122-5326 90 80 107122-5327 90 40 157122-5328 90 50 157122-5329 90 55 157122-5330 90 60 157122-5331 90 65 157122-5332 90 70 157122-5333 90 75 157122-5334 90 80 157122-5335 90 50 207122-5336 90 60 207122-5337 90 70 207122-5338 90 75 207122-5339 100 50 107122-5340 100 60 10


Catalog No. (degrees) (mm) (mm)7122-5341 110 65 N/A7122-5342 110 75 N/A7122-5343 110 85 N/A7122-5344 120 65 N/A7122-5345 120 75 N/A7122-5346 120 85 N/A7122-5347 130 65 N/A7122-5348 130 70 N/A7122-5349 130 75 N/A7122-5350 130 80 N/A7122-5351 130 85 N/A7122-5352 130 90 N/A7122-5353 130 95 N/A 7122-5354 130 100 N/A7122-5355 130 105 N/A7122-5356 130 110 N/A


90° Adolescent Osteotomy, 3 Ho lesPrimary use: Proximal femoral osteotomiesScrew size: 4.5 mm cortex

BladeLength Displacement

Catalog No. (mm) (mm)7122-5640 40 107122-5641 40 157122-5642 50 107122-5643 50 157122-5644 60 15

Height: 80 mmShaft: 14 mm x 4.5 mmT-Blade: 5.3 mm x 11.7 mmHole Spacing: 16 mm

Shaft: 16.1 mm x 6 mmU-Blade: 6.6 mm x 16.1 mmHole Spacing: 16 mm

2-14


Catalog No. (mm) (mm) Holes7122-5400 50 92 57122-5401 60 92 57122-5402 70 92 57122-5403 80 92 57122-5404 50 124 77122-5405 60 124 77122-5406 70 124 77122-5407 80 124 77122-5408 50 156 97122-5409 60 156 97122-5410 70 156 97122-5411 80 156 97122-5412 50 204 127122-5413 60 204 127122-5414 70 204 127122-5415 80 204 127122-5416 50 235 147122-5417 60 235 147122-5418 70 235 147122-5419 80 235 147122-5420 60 267 167122-5421 70 267 167122-5422 80 267 167122-5423 60 299 187122-5424 70 299 187122-5425 80 299 18


95° Adult Condylar P latePrimary use: Proximal femoral osteotomiesScrew sizes: 4.5 mm cortex and 6.5 mm cancellous

Shaft: 16.1 mm x 6 mmU-Blade: 6.6 mm x 16.1 mmHole Spacing: 16 mm

2-15


Catalog No. (mm) (mm) Holes7122-5500 50 60 47122-5501 60 60 47122-5502 70 60 47122-5503 75 60 47122-5504 80 60 47122-5505 85 60 47122-5506 90 60 47122-5507 95 60 47122-5508 100 60 47122-5509 105 60 47122-5510 110 60 47122-5511 50 104 67122-5512 60 104 67122-5513 70 104 67122-5514 80 104 67122-5515 90 104 67122-5516 70 152 97122-5517 80 152 97122-5518 90 152 97122-5519 70 200 127122-5520 80 200 127122-5521 90 200 12


130° Adult Angled P latePrimary use: Proximal femoral osteotomiesScrew size: 4.5 mm cortex

Shaft: 16.1 mm x 6 mmU-Blade: 6.6 mm x 16.1 mmHole Spacing: 13 mm and 16 mm

2-16

TC-100

INSTRUMENTS

INSTRUMENTS

3-1

I N S T R U M E N T S

Dri l l B i ts , Qu ick Coupl ing

Dri l l B i ts , Non-Quick Coupl ingSterile

EffectiveDiameter Length Length

Catalog No. (mm) (mm) (mm)7117-6511 1.1 45 N/A 7117-6516 1.5 95 N/A 7117-6521 2.0 110 N/A 7117-6525 2.5 (Gold) 95 N/A 7117-6528 2.7 110 977117-6532 3.2 130 115 7117-6533 3.2 180 165 7117-6535 3.5 95 807117-6537 3.5 180 165 7117-6545 4.5 130 115 7117-6547 4.5 180 165

EffectiveDiameter Length Length

Catalog No. (mm) (mm) (mm)7117-6011* 1.1 60 35 7117-0001 1.1 60 35 7117-6015* 1.5 85 60 7117-0003 1.5 85 60 7117-6016* 1.5 110 857117-6020* 2.0 100 75 7117-0005 2.0 100 75 7117-6021* 2.0 125 1007117-6025* 2.5 (Gold) 110 85 7117-0071 2.5 (Gold) 110 85 7117-6026* 2.5 (Gold) 180 1557117-6027* 2.7 100 75 7117-0007 2.7 100 75 7117-6028* 2.7 125 1007117-0111 3.2 145 120 7117-6032* 3.2 145 120 7117-6033* 3.2 195 1707117-6035* 3.5 110 85 7117-0073 3.5 110 85 7117-6037* 3.5 195 1707117-0147 3.5 195 1707117-0113 4.5 145 120 7117-6045* 4.5 145 120 7117-6047* 4.5 195 1707117-0149 4.5 195 170

*Sterile


3-2

Taps

Catalog No. Description7117-0009 Countersink for 1.5 mm/

2.0 mm Screws7117-0075 Countersink for 2.7 mm/3.5 mm/

4.0 mm Screws7117-0115 Countersink for 4.5 mm/

6.5 mm Screws

Catalog No. Description7117-0017 Tap, 1.5 mm 7117-0019 Tap, 2.0 mm7117-0021 Tap, 2.7 mm7117-0077 Tap, 3.5 mm for Cortex

Bone Screws, Gold7117-0079 Tap, 4.0 mm for Cancellous

Bone Screws7117-0119 Tap, 4.5 mm7117-0121 Tap, 6.5 mm7117-0157 Tap, 3.5 mm, Calibrated 7117-0159 Tap, 4.5 mm, Calibrated

Three-F luted Dr i l l B i ts , Qu ick Coupl ingEffective

Diameter Length LengthCatalog No. (mm) (mm) (mm)7117-6125* 2.5 230 205 7117-0153 2.5 230 205 7117-6132* 3.2 230 2057117-0155 3.2 230 2057117-0151 4.5 196 1707117-6145* 4.5 196 170

*Sterile

Countersinks

3-3


Double Dr i l l S leeve, 2 .0 mm/2.7 mmCatalog No. 7117-0027


Double Dr i l l S leeve, 1 . 1 mm/1.5 mmCatalog No. 7117-0023





3-4

Insert Dr i l l S leeve, 4 .5 mm/3.2 mmCatalog No. 7117-0125

Paral le l Dr i l l Gu ide/Sleeve, 2 .0 mmCatalog No. 7117-0083

Dri l l Gu ide, Neutra l & Load, 2 .7 mmCatalog No. 7117-0081


Insert Dr i l l S leeve, 2 .5 mm/3.5 mmCatalog No. 7117-0089


3-5


Universal Dr i l l Gu ide, 3 .5 mmCatalog No. 7117-0087

Universal Dr i l l Gu ide, 4 .5 mmCatalog No. 7117-0131

Quick Connect Adaptor for Jacobs ChuckCatalog No. 7117-0072

Quick Coupl ing T-Handle , Smal lCatalog No. 7117-0117


3-6

Quick Coupl ing Handle , Smal lCatalog No. 7117-0015

Cruci form Screwdriver Shaf t , Min i(For use with Quick Coupling Handles, 7117-0013 or 7117-0014)

Catalog No. 7117-0037

Quick Coupl ing Handle , Bu lb Min iCatalog No. 7117-0014

Hex Screwdriver Shaf t , Min i(For use with Quick Coupling Handles, 7117-0013 or 7117-0014)


Quick Coupl ing Handle , Min iCatalog No. 7117-0013

Hex Screwdriver Shaf t , Smal l , 100 mmCatalog No. 7117-0033

Hex Screwdriver Shaf t , Smal l , Long with Groove, 165 mmCatalog No. 7117-0169

3-7


Hex Screwdriver, LargeCatalog No. 7117-0133

Hex Screwdriver, Large, LongCatalog No. 7117-0161

Hex Screwdriver Shaf t , Smal l with Groove, 135 mmCatalog No. 7117-1035

Hex Screwdriver, Smal lCatalog No. 7117-0029

Hex Screwdriver, Smal l , LongCatalog No. 7117-0165


3-8

Hold ing S leeve for Hex Screwdriver, LargeCatalog No. 7117-0135

Hold ing S leeve for Hex Screwdriver, Smal lCatalog No. 7117-0167

Spl i t Ho ld ing S leeve for Hex Dr iver, Smal lCatalog No. 7117-0031

Self-Hold ing S leeve for Min i Shaf t , Cruc i form & Hex 1 .5 mm Min i ScrewsCatalog No. 7117-0035

Hex Screwdriver Shaf t , Large, Long with Groove, 165 mmCatalog No. 7117-0163

Hex Screwdriver Shaf t , Large, 100 mmCatalog No. 7117-0137

Hold ing S leeve for Min i Shaf t , Cruc i form & Hex 2.0 mm Mini ScrewsCatalog No. 7117-0034

3-9


Plate Cutt ing Forceps, Shear Cut(For use with mini plates only)


Plate/Bone Hold ing ForcepsCatalog No. 7117-0056

Plate/Bone Hold ing Forceps with FootCatalog No. 7117-0054

Plate Cutt ing Forceps, Center Cut(For use with mini plates only)



3-10

Reduct ion Forceps with Po ints, BroadCatalog No. 7117-0051

Reduct ion Forceps with Po ints, NarrowCatalog No. 7117-0049

Reduct ion Forceps with Po ints,130 mm, RatchetCatalog No. 7117-0052

Stagbeet le Forceps, 120 mm Catalog No. 7117-0053

3-11


Reduct ion Forceps, 205 mm Catalog No. 7117-0044

Verbrugge Sel f-Center ing Forceps with Speed LockCatalog No. Size (mm)7117-0046 2407117-0215 2607117-0048 280

Verbrugge Sel f-Center ing Forceps, S ize 0Catalog No. 7117-0091

Self-Center ing Forceps, 150 mmCatalog No. 7117-0092

3-12

Reduct ion Forceps with Serrated JawsCatalog No. 7117-0093


Reduct ion Forceps for use with ScrewsCatalog No. 7117-0211

Catalog No. Size (mm)7117-0217 1707117-0050 240

Reduct ion Forceps with Speed Lock

Farabeuf ForcepsCatalog No. Size (mm)7117-0195 1907117-0197 250


3-13

Reduct ion Forceps, 3-Pointed Bal l T ipsCatalog No. Size (mm)7117-0209 400

Reduct ion Forceps, Angle Po int Ba l l T ipsCatalog No. Size (mm)7117-0205 250

Reduct ion Forceps, Po inted Bal l T ips

Catalog No. Size (mm)7117-0199 2007117-0203 2407117-0207 400

Asymmetr ic Pe lv ic Reduct ion ForcepsCatalog No. 7117-0213

3-14


Wire Cutter, 175 mm(Maximum capacity: Ø 1.6 mm)


Bending Iron for 2.7 mm and 3.5 mm Plates, Lef t Catalog No. 7117-0101

Wire Cutter, 220 mm(Maximum capacity: Ø 2.5 mm)


Bending Iron for 2.7 mm and 3.5 mm Plates, R ight Catalog No. 7117-0103


3-15

Bending Iron for 3.5 mm and 4.5 mm Reconstruct ion P latesCatalog No. 7117-0173

Bending Iron for Min i P lates Catalog No. 7117-0068

Bending Iron for 1 .25 mm-2.0 mm K-Wires Catalog No. 7117-0099

Large Bending Press Catalog No. 7117-0176

Bending (Twist ing) Iron for 4.5 mm Plates (For use with large Bending Press, 7117-0176)



3-16

Pl iers for 1 .5 mm & 2.0 mm PlatesCatalog No. 7117-0061

Bending P l iers for 2.7 mm & 3.5 mm PlatesCatalog No. 7117-0076

Bending P l iers for 3.5 mm & 4.5 mm Reconstruct ion P latesCatalog No. 7117-0175

3-17


Wire Bending P l iers, 140 mmCatalog No. 7117-0063

Bending Templates

Blunt Pe lv ic RetractorCatalog No. 7117-0191

Hohmann RetractorCatalog No. Width (mm)7117-0055 67117-0057 87117-0095 15

Catalog No. Description7117-0105 Template, 5 Holes, Large7117-0107 Template, 7 Holes, Large 7117-0109 Template, 9 Holes, Large 7117-0112 Template, 12 Holes, Large 7117-0177 Template, 3.5 mm

Reconstruction Plate, Straight 7117-0179 Template, 3.5 mm

Reconstruction Plate, Curved 7117-0181 Template, 4.5 mm

Reconstruction Plate, Straight 7117-1005 Template, 5 Holes, Small 7117-1007 Template, 7 Holes, Small 7117-1009 Template, 9 Holes, Small 7117-1012 Template, 12 Holes, Small


3-18

Volkman Bone Hook, MediumCatalog No. 7117-0185

Bone Hook, LargeCatalog No. 7117-0187

Straight Ba l l Sp ikeCatalog No. 7117-0189

Periosteal E levatorCatalog No. Width (mm) Description7117-0059 3 Straight Edge7117-0097 6 Curved Edge7117-0098 6 Straight Edge

Spiked D iskCatalog No. 7117-0193

3-19


Depth Gauge for 1 .5 mm/2.0 mm Screws, 30 mmCatalog No. 7117-0041

Depth Gauge for 1 .5 mm/2.0 mm Screws, 38 mmCatalog No. 7117-0038

Depth Gauge for 4.5 mm/6.5 mm Screws, 110 mmCatalog No. 7117-0139

Depth Gauge for Smal l & Large Pe lv ic Screws, 120 mmCatalog No. 7117-0171

Universal Chuck with T-HandleCatalog No. 7117-0183

Sharp HookCatalog No. 7117-0043

Depth Gauge for 2.7 mm/3.5 mm/4.0 mm Screws, 50 mmCatalog No. 7117-0039


3-20

Art icu lated Tension Device with GaugeCatalog No. 7117-0145

Screw Forceps, Min iCatalog No. 7117-0002

Combinat ion Wrench, 11 mmCatalog No. 7117-0141

Screw Forceps, StandardCatalog No. 7117-0045

Socket Wrench with Un iversal Jo int , 1 1 mmCatalog No. 7117-0143

3-21

B L A D E P L A T E I N S T R U M E N T S

Trip le Dr i l l Gu ide*Catalog No. 7117-5013

Seat ing Ch ise l , Adult , 320 mm*Catalog No. 7117-5132

Seat ing Ch ise l , Infant , 260 mm*Catalog No. 7117-5126

Router, Qu ick Coupl ing*Catalog No. 7117-5015

Chise l Gu ide with Adjustable Angle*Catalog No. 7117-5100

*Included in Blade Plate Instrument Set (Catalog No. 7117-6009)

Seat ing Ch ise l , Adult , 284 mmCatalog No. 7117-5128

Router, Jacob’s ChuckCatalog No. 7117-5017

B L A D E P L A T E I N S T R U M E N T SSeat ing Ch ise l , Adolescent , Ch i ld & Smal l Statured Adult*Catalog No. 7117-5114

Inserter/Extractor, Adult/Smal l Statured Adult*Catalog No. 7117-5200

Impactor*Catalog No. 7117-5350

Inserter/Extractor, Adolescent/Chi ld*Catalog No. 7117-5210


Inserter for B i furcated Infant P late*Catalog No. 7117-5225

3-22

3-23


Triangular Posit ion ing P late , Smal l 90° /50° /40° *Catalog No. 7117-5400

Tr iangular Posit ion ing P late , Smal l 1 10° /60° /10° *Catalog No. 7117-5430

Tr iangular Posit ion ing P late , Smal l 80° /70° /30° *Catalog No. 7117-5410

Tr iangular Posit ion ing P late , Smal l 100° /60° /20° *Catalog No. 7117-5420


Slotted Hammer*Catalog No. 7117-5300

Quadrangular Posit ion ing P late , 1 10° /90° /90° /70° *Catalog No. 7117-5450

Condylar P late Gu ide*Catalog No. 7117-5460

Dri l l Gu ide, H ip , Neutra l & Load, 4 .5 mm*Catalog No. 7117-5545



Hammer, 500gCatalog No. 7117-5325

3-24

3-25

Chise l B lade, 10 mmCatalog No. 7117-5510



Chise l HandleCatalog No. 7117-5500



TC-100

TRAYS/SETS

TRAYS/SETS

4-1

T R A Y S

Smal l Fragment Tray for Instrumentat ion & ImplantsCatalog No. 7117-2001

Mini Fragment Tray for Instrumentat ion & ImplantsCatalog No. 7117-1001

Large Screw Caddy for 4.5 mm/6.5 mm ScrewsCatalog No. 7117-3003

4-2

T R A Y S

Large Instrument TrayCatalog No. 7117-3001

Large P late TrayCatalog No. 7117-3005

Pelv ic Instrumentat ion TrayCatalog No. 7117-4001

4-3

T R A Y S

Pelv ic Reduct ion Instrumentat ion TrayCatalog No. 7117-4003

Pelv ic Implant TrayCatalog No. 7117-4005

Blade P late Instrumentat ion TrayCatalog No. 7117-5005

S E T L I S T I N G S

4-4

Catalog No. Description7117-1000 Mini Instrumentation/Implant Set, Hexagonal Screws7117-1003 Mini Instrumentation Set7116-5000 Mini Implant Set, Hexagonal Screws7116-5003 Mini Implant Set, Cruciate Screws7116-5001 Mini Cruciate Screw Set7117-6001 Mini Self-Tapping Instrumentation/Implant Set, Hexagonal Screws7116-6000 Mini Self-Tapping Implant Set, Hexagonal Screws7116-6004 Mini Self-Tapping Implant Set, Cruciate Screws7116-6002 Mini Self-Tapping Hexagonal Screw Set7116-6006 Mini Self-Tapping Cruciate Screw Set7117-2000 Small Instrumentation Implant Set7117-2003 Small Instrumentation Set7116-5002 Small Implant Set7117-6004 Small Self-Tapping Instrumentation/Implant Set7116-6003 Small Self-Tapping Implant Set7117-3000 Large Instrumentation/Implant Set7117-3007 Large Instrumentation Set7116-5004 Large Screw Caddy Set7116-5006 Large Plate Set7117-6006 Large Self-Tapping Instrumentation/Implant Set7116-6005 Large Self-Tapping Screw Caddy Set7117-4000 Pelvic Instrumentation/Implant Set7117-4006 Pelvic Instrumentation Set7116-5008 Pelvic Implant Set7117-4002 Pelvic Reduction Instrumentation Set7117-6008 Pelvic Self-Tapping Instrumentation/Implant Set7116-6007 Pelvic Self-Tapping Implant Set7117-6009 Blade Plate Instrumentation Set

TC-100

ACCESSORIES

ACCESSORIES

A C C E S S O R I E S

5-1

I.D. O.D.Catalog No. (mm) (mm) Packaged7114-3104 2.2 4.5 Nonsterile 7114-3107 3.7 7.0 Nonsterile 7114-3110 4.7 10.0 Nonsterile 7114-3113 6.6 13.0 Nonsterile 7114-3004 2.2 4.5 Sterile 7114-3007 3.7 7.0 Sterile 7114-3010 4.7 10.0 Sterile 7114-3013 6.6 13.0 Sterile

Washers6 per Package

Nut for 4.5 Cortex ScrewsSterile


WiresSterile, 6 per Package (Not Shown)

Wrench for NutCatalog No. 7117-0142

Diameter LengthCatalog No. Description (mm) (mm)7116-3006 Cerclage Wire 0.6 1757116-3008 Cerclage Wire 0.8 2007116-1066 K-Wire, Trocar Point 0.6 707116-1008 K-Wire, Trocar Point 0.8 707116-1010 K-Wire, Trocar Point 1.0 1507116-1012 K-Wire, Trocar Point 1.25 1507116-1016 K-Wire, Trocar Point 1.6 1507116-1020 K-Wire, Trocar Point 2.0 150

Schanz ScrewDiameter Length

Catalog No. Description (mm) (mm)7117-0315 Diamond Point 6.0 190

A C C E S S O R I E S

5-2

Support Mater ia lsCatalog No. Description7198-0425 Autoclavable Labels, Mini Trays7198-0426 Autoclavable Labels, Small Trays7198-0427 Autoclavable Labels, Large Trays7198-0428 Autoclavable Labels, Blade Plate Trays7198-0429 Autoclavable Labels, Pelvic Trays7117-5526 Radiographic Templates, Blade Plates7118-0312 Training Book, “A Guide to Fracture Management”7118-0046 TC-100 CD-ROM Training Software7118-0057 TC-100 Bin Labels, Mini Fragment7118-0058 TC-100 Bin Labels, Small Fragment7118-0059 TC-100 Bin Labels, Large Fragment7118-0060 TC-100 Bin Labels, Pelvic Fragment7118-0061 TC-100 Bin Labels, Angled Blade Plates7118-0321 Inventory Control Sheets, Mini Fragment7118-0320 Inventory Control Sheets, Small Fragment7118-0319 Inventory Control Sheets, Large Fragment7118-0318 Inventory Control Sheets, Pelvic Fragment7118-0325 Inventory Control Sheets, Blade Plates

TC-100

INDEXES

INDEXES

N U M E R I C A L I N D E X

6-1

91-1123 calcaneal plate, 6 hole, special order 2-791-3886 calcaneal plate, 8 hole, special order 2-7

71140003 4.5 mm reconstruction plate, 3 holes, 45 mm 2-1171140004 4.5 mm reconstruction plate, 4 holes, 61 mm 2-1171140005 4.5 mm reconstruction plate, 5 holes, 77 mm 2-1171140006 4.5 mm reconstruction plate, 6 holes, 93 mm 2-1171140007 4.5 mm reconstruction plate, 7 holes, 109 mm 2-1171140008 4.5 mm reconstruction plate, 8 holes, 125 mm 2-1171140009 4.5 mm reconstruction plate, 9 holes, 141 mm 2-1171140010 4.5 mm reconstruction plate, 10 holes, 157 mm 2-1171140011 4.5 mm reconstruction plate, 11 holes, 173 mm 2-1171140012 4.5 mm reconstruction plate, 12 holes, 189 mm 2-1171140013 4.5 mm reconstruction plate, 13 holes, 205 mm 2-1171140014 4.5 mm reconstruction plate, 14 holes, 221 mm 2-1171140015 4.5 mm reconstruction plate, 15 holes, 237 mm 2-1171140016 4.5 mm reconstruction plate, 16 holes, 253 mm 2-11

71140104 3.5 mm reconstruction plate, 4 holes, 46 mm 2-1171140105 3.5 mm reconstruction plate, 5 holes, 58 mm 2-1171140106 3.5 mm reconstruction plate, 6 holes, 70 mm 2-1171140107 3.5 mm reconstruction plate, 7 holes, 82 mm 2-1171140108 3.5 mm reconstruction plate, 8 holes, 94 mm 2-1171140109 3.5 mm reconstruction plate, 9 holes, 106 mm 2-1171140110 3.5 mm reconstruction plate, 10 holes, 118 mm 2-1171140111 3.5 mm reconstruction plate, 11 holes, 130 mm 2-1171140112 3.5 mm reconstruction plate, 12 holes, 142 mm 2-1171140113 3.5 mm reconstruction plate, 13 holes, 154 mm 2-1171140114 3.5 mm reconstruction plate, 14 holes, 166 mm 2-1171140115 3.5 mm reconstruction plate, 15 holes, 178 mm 2-1171140116 3.5 mm reconstruction plate, 16 holes, 190 mm 2-1171140118 3.5 mm reconstruction plate, 18 holes, 214 mm 2-1171140120 3.5 mm reconstruction plate, 20 holes, 238 mm 2-1171140122 3.5 mm reconstruction plate, 22 holes, 263 mm 2-11

71140202 3.5 mm small compression plate, 2 holes, 25 mm 2-571140203 3.5 mm small compression plate, 3 holes, 37 mm 2-571140204 3.5 mm small compression plate, 4 holes, 49 mm 2-571140205 3.5 mm small compression plate, 5 holes, 61 mm 2-571140206 3.5 mm small compression plate, 6 holes, 73 mm 2-571140207 3.5 mm small compression plate, 7 holes, 85 mm 2-571140208 3.5 mm small compression plate, 8 holes, 97 mm 2-571140209 3.5 mm small compression plate, 9 holes, 109 mm 2-571140210 3.5 mm small compression plate, 10 holes, 121 mm 2-571140212 3.5 mm small compression plate, 12 holes, 145 mm 2-571140214 3.5 mm small compression plate, 14 holes, 169 mm 2-571140216 3.5 mm small compression plate, 16 holes, 194 mm 2-571140218 3.5 mm small compression plate, 18 holes, 217 mm 2-571140220 3.5 mm small compression plate, 20 holes, 242 mm 2-571140222 3.5 mm small compression plate, 22 holes, 265 mm 2-5

71140302 1/3 tubular plate with collar, 2 holes, 25 mm 2-571140303 1/3 tubular plate with collar, 3 holes, 37 mm 2-571140304 1/3 tubular plate with collar, 4 holes, 49 mm 2-571140305 1/3 tubular plate with collar, 5 holes, 61 mm 2-571140306 1/3 tubular plate with collar, 6 holes, 73 mm 2-571140307 1/3 tubular plate with collar, 7 holes, 85 mm 2-571140308 1/3 tubular plate with collar, 8 holes, 97 mm 2-571140309 1/3 tubular plate with collar, 9 holes, 109 mm 2-571140310 1/3 tubular plate with collar, 10 holes, 121 mm 2-571140312 1/3 tubular plate with collar, 12 holes, 145 mm 2-5

71140403 small T-plate, right angle, 3 head, 3 shaft holes, 50 mm 2-571140404 small T-plate, right angle, 4 head, 4 shaft holes, 56 mm 2-571140405 small T-plate, right angle, 3 head, 5 shaft holes, 67 mm 2-571140406 small T-plate, right angle, 4 head, 6 shaft holes, 78 mm 2-571140503 small T-plate, oblique, 3 head, 3 shaft holes, 53 mm 2-571140504 small T-plate, oblique, 3 head, 4 shaft holes, 63 mm 2-571140505 small T-plate, oblique, 3 head, 5 shaft holes, 73 mm 2-5

71140603 cloverleaf plate, 3 holes, 88 mm 2-671140604 cloverleaf plate, 4 holes, 104 mm 2-6

71140606 3.5 mm curved reconstruction plate, 6 holes, 70 mm 2-1171140608 3.5 mm curved reconstruction plate, 8 holes, 94 mm 2-1171140610 3.5 mm curved reconstruction plate, 10 holes, 118 mm 2-1171140612 3.5 mm curved reconstruction plate, 12 holes, 142 mm 2-1171140614 3.5 mm curved reconstruction plate, 14 holes, 166 mm 2-1171140616 3.5 mm curved reconstruction plate, 16 holes, 190 mm 2-1171140618 3.5 mm curved reconstruction plate, 18 holes, 214 mm 2-11

71140625 cloverleaf plate, 5 holes, 120 mm, sterile 2-671140626 cloverleaf plate, 6 holes, 136 mm, sterile 2-671140627 cloverleaf plate, 7 holes, 152 mm, sterile 2-671140628 cloverleaf plate, 8 holes, 168 mm, sterile 2-671140629 cloverleaf plate, 9 holes, 184 mm, sterile 2-6

71140704 T-buttress plate, 4 holes, 80 mm 2-971140705 T-buttress plate, 5 holes, 96 mm 2-971140706 T-buttress plate, 6 holes, 112 mm 2-9

71140804 l-buttress plate, 4 holes angled left, 86 mm 2-971140904 l-buttress plate, 4 holes angled right, 86 mm 2-9

71141003 lateral tibial head buttress plate, 3 holes right, sterile 2-971141005 lateral tibial head buttress plate, 5 holes right, 118 mm 2-971141007 lateral tibial head buttress plate, 7 holes right, 149 mm 2-971141009 lateral tibial head buttress plate, 9 holes right, 181 mm 2-971141011 lateral tibial head buttress plate, 11 holes right, 214 mm 2-971141013 lateral tibial head buttress plate, 13 holes right, 246 mm 2-971141103 lateral tibial head buttress plate, 3 holes left, sterile 2-971141105 lateral tibial head buttress plate, 5 holes left, 118 mm 2-971141107 lateral tibial head buttress plate, 7 holes left, 149 mm 2-971141109 lateral tibial head buttress plate, 9 holes left, 181 mm 2-971141111 lateral tibial head buttress plate, 11 holes left, 214 mm 2-971141113 lateral tibial head buttress plate, 13 holes left, 246 mm 2-9

71141206 4.5 mm broad compression plate, 6 holes, 103 mm 2-871141207 4.5 mm broad compression plate, 7 holes, 119 mm 2-871141208 4.5 mm broad compression plate, 8 holes, 135 mm 2-871141209 4.5 mm broad compression plate, 9 holes, 151 mm 2-871141210 4.5 mm broad compression plate, 10 holes, 167 mm 2-871141212 4.5 mm broad compression plate, 12 holes, 199 mm 2-871141214 4.5 mm broad compression plate, 14 holes, 231 mm 2-871141216 4.5 mm broad compression plate, 16 holes, 263 mm 2-871141218 4.5 mm broad compression plate, 18 holes, 295 mm 2-871141220 4.5 mm broad compression plate, 20 holes, 326 mm 2-871141222 4.5 mm broad compression plate, 22 holes, 358 mm 2-871141224 4.5 mm broad compression plate, 24 holes, 390 mm 2-871141226 4.5 mm broad compression plate, 26 holes, 423 mm 2-8

71141302 semi-tubular plate, 2 holes, 39 mm 2-871141303 semi-tubular plate, 3 holes, 55 mm 2-871141304 semi-tubular plate, 4 holes, 71 mm 2-871141305 semi-tubular plate, 5 holes, 87 mm 2-871141306 semi-tubular plate, 6 holes, 103 mm 2-871141307 semi-tubular plate, 7 holes, 119 mm 2-871141308 semi-tubular plate, 8 holes, 135 mm 2-871141309 semi-tubular plate, 9 holes, 151 mm 2-871141310 semi-tubular plate, 10 holes, 167 mm 2-871141311 semi-tubular plate, 11 holes, 183 mm 2-871141312 semi-tubular plate, 12 holes, 199 mm 2-8

71141402 4.5 mm narrow compression plate, 2 holes, 39 mm 2-871141403 4.5 mm narrow compression plate, 3 holes, 55 mm 2-871141404 4.5 mm narrow compression plate, 4 holes, 71 mm 2-871141405 4.5 mm narrow compression plate, 5 holes, 87 mm 2-871141406 4.5 mm narrow compression plate, 6 holes, 103 mm 2-871141407 4.5 mm narrow compression plate, 7 holes, 119 mm 2-871141408 4.5 mm narrow compression plate, 8 holes, 135 mm 2-871141409 4.5 mm narrow compression plate, 9 holes, 151 mm 2-871141410 4.5 mm narrow compression plate, 10 holes, 167 mm 2-871141411 4.5 mm narrow compression plate, 11 holes, 183 mm 2-871141412 4.5 mm narrow compression plate, 12 holes, 199 mm 2-871141413 4.5 mm narrow compression plate, 13 holes, 215 mm 2-8

Catalog No. Description Page No. Catalog No. Description Page No.

6-2

71141414 4.5 mm narrow compression plate, 14 holes, 231 mm 2-871141415 4.5 mm narrow compression plate, 15 holes, 247 mm 2-871141416 4.5 mm narrow compression plate, 16 holes, 263 mm 2-871141418 4.5 mm narrow compression plate, 18 holes, 295 mm 2-871141420 4.5 mm narrow compression plate, 20 holes, 326 mm 2-871141422 4.5 mm narrow compression plate, 22 holes, 358 mm 2-871141424 4.5 mm narrow compression plate, 24 holes, 390 mm 2-8

71141505 spoon plate, 5 holes in shaft, 100 mm 2-1071141506 spoon plate, 6 holes in shaft, 120 mm 2-10

71141603 T-plate, 3 holes in shaft, 68 mm 2-971141604 T-plate, 4 holes in shaft, 84 mm 2-971141605 T-plate, 5 holes in shaft, 100 mm 2-971141606 T-plate, 6 holes in shaft, 116 mm 2-971141608 T-plate, 8 holes in shaft, 148 mm 2-9

71141704 hook plate, 4 holes, 123 mm 2-10

71141808 cobra head plate, 8 holes, 170 mm 2-1071141809 cobra head plate, 9 holes, 188 mm 2-1071141810 cobra head plate, 10 holes, 202 mm 2-1071141811 cobra head plate, 11 holes, 218 mm 2-10

71141900 2.7 mm small compression plate, 2 holes, 20 mm, sterile 2-471141902 2.7 mm small compression plate, 2 holes, 26 mm, sterile 2-471141904 2.7 mm small compression plate, 4 holes, 36 mm, sterile 2-471141905 2.7 mm small compression plate, 5 holes, 44 mm, sterile 2-471141906 2.7 mm small compression plate, 6 holes, 52 mm, sterile 2-471141907 2.7 mm small compression plate, 7 holes, 60 mm, sterile 2-471141908 2.7 mm small compression plate, 8 holes, 68 mm, sterile 2-471141909 2.7 mm small compression plate, 9 holes, 76 mm, sterile 2-471141910 2.7 mm small compression plate, 10 holes, 84 mm, sterile 2-471141912 2.7 mm small compression plate, 12 holes, 100 mm, sterile 2-4

71142007 condylar buttress plate, 7 holes left, 158 mm 2-1071142009 condylar buttress plate, 9 holes left, 190 mm 2-1071142011 condylar buttress plate, 11 holes left, 221 mm 2-1071142013 condylar buttress plate, 13 holes left, 253 mm 2-1071142015 condylar buttress plate, 15 holes left, 285 mm 2-1071142107 condylar buttress plate, 7 holes right, 158 mm 2-1071142109 condylar buttress plate, 9 holes right, 190 mm 2-1071142111 condylar buttress plate, 11 holes right, 221 mm 2-1071142113 condylar buttress plate, 13 holes right, 253 mm 2-1071142115 condylar buttress plate, 15 holes right, 285 mm 2-10

71143004 4.5 mm washer (6/box), sterile, 2.2 mm I.D. 5-171143007 7.0 mm washer (6/box), sterile, 3.7 mm I.D. 5-171143010 10.0 mm washer (6/box), sterile, 4.7 mm I.D. 5-171143013 13.0 mm washer (6/box), sterile, 6.7 mm I.D. 5-171143045 nut for 4.5 mm cortical screws, sterile 5-171143104 4.5 mm washer (6/box), 2.2 mm I.D. 5-171143107 7.0 mm washer (6/box), 3.7 mm I.D. 5-171143110 10.0 mm washer (6/box), 4.7 mm I.D. 5-171143113 13.0 mm washer (6/box), 6.7 mm I.D. 5-1

71144010 calcaneal plate w/template, 60 mm, sterile 2-771144011 calcaneal plate w/template, 70 mm, sterile 2-771144012 calcaneal plate w/template, 9 hole, sterile 2-7

71145020 1.5 mm straight plate, 20 holes 2-171145022 1.5 mm T-plate, 3 holes in head, 9 holes in shaft 2-171145024 1.5 mm T-plate, 4 holes in head, 9 holes in shaft 2-171145026 1.5 mm condylar plate, 7 holes, left 2-171145028 1.5 mm condylar plate, 7 holes, right 2-171145030 1.5 mm H-plate, 4 holes 2-1

71146020 2.0 mm straight plate, 3 holes 2-271146022 2.0 mm straight plate, 4 holes 2-271146024 2.0 mm straight plate, 5 holes 2-271146026 2.0 mm straight plate, 6 holes 2-271146028 2.0 mm straight plate, 20 holes, 100 mm 2-2

71146030 2.0 mm T-plate, 3 holes in head, 9 holes in shaft 2-2

71146032 2.0 mm T-plate, 4 holes in head, 9 holes in shaft 2-271146034 2.0 mm T-plate, 2 holes in head, 2 holes in shaft 2-2

71146036 2.0 mm L-plate, oblique, right 2-271146038 2.0 mm L-plate, oblique, left 2-271146040 2.0 mm condylar plate, 7 holes, left 2-371146042 2.0 mm condylar plate, 7 holes, right 2-371146044 2.0 mm L-plate, right 2-271146046 2.0 mm L-plate, left 2-271146048 2.0 mm H-plate, 4 holes 2-3

71147001 2.7 mm L-plate, right 2-471147002 2.7 mm L-plate, 3 holes, oblique left 2-471147003 2.7 mm L-plate, left 2-471147004 2.7 mm L-plate, 3 holes, oblique right 2-471147006 2.7 mm T-plate, 3 holes 2-471147008 2.7 mm condylar plate, 7 holes, left 2-471147010 2.7 mm condylar plate, 7 holes, right 2-4

71147012 multi-fragment plate, 7 hole 2-3

71148003 quarter-tubular plate, 3 holes 2-371148004 quarter-tubular plate, 4 holes 2-371148005 quarter-tubular plate, 5 holes 2-371148006 quarter-tubular plate, 6 holes 2-371148007 quarter-tubular plate, 7 holes 2-371148008 quarter-tubular plate, 8 holes 2-3

71149006 1.5 mm x 6 mm self-tapping screw, cruciate socket 1-171149007 1.5 mm x 7 mm self-tapping screw, cruciate socket 1-171149008 1.5 mm x 8 mm self-tapping screw, cruciate socket 1-171149009 1.5 mm x 9 mm self-tapping screw, cruciate socket 1-171149010 1.5 mm x 10 mm self-tapping screw, cruciate socket 1-171149011 1.5 mm x 11 mm self-tapping screw, cruciate socket 1-171149012 1.5 mm x 12 mm self-tapping screw, cruciate socket 1-171149014 1.5 mm x 14 mm self-tapping screw, cruciate socket 1-171149016 1.5 mm x 16 mm self-tapping screw, cruciate socket 1-171149018 1.5 mm x 18 mm self-tapping screw, cruciate socket 1-171149020 1.5 mm x 20 mm self-tapping screw, cruciate socket 1-171149022 1.5 mm x 22 mm self-tapping screw, cruciate socket 1-171149024 1.5 mm x 24 mm self-tapping screw, cruciate socket 1-1

71149106 1.5 mm x 6 mm self-tapping screw, hex socket 1-171149107 1.5 mm x 7 mm self-tapping screw, hex socket 1-171149108 1.5 mm x 8 mm self-tapping screw, hex socket 1-171149109 1.5 mm x 9 mm self-tapping screw, hex socket 1-171149110 1.5 mm x 10 mm self-tapping screw, hex socket 1-171149111 1.5 mm x 11 mm self-tapping screw, hex socket 1-171149112 1.5 mm x 12 mm self-tapping screw, hex socket 1-171149114 1.5 mm x 14 mm self-tapping screw, hex socket 1-171149116 1.5 mm x 16 mm self-tapping screw, hex socket 1-171149118 1.5 mm x 18 mm self-tapping screw, hex socket 1-171149120 1.5 mm x 20 mm self-tapping screw, hex socket 1-171149122 1.5 mm x 22 mm self-tapping screw, hex socket 1-171149124 1.5 mm x 24 mm self-tapping screw, hex socket 1-1

71149206 2.0 mm x 6 mm self-tapping screw, cruciate socket 1-271149208 2.0 mm x 8 mm self-tapping screw, cruciate socket 1-271149210 2.0 mm x 10 mm self-tapping screw, cruciate socket 1-271149212 2.0 mm x 12 mm self-tapping screw, cruciate socket 1-271149214 2.0 mm x 14 mm self-tapping screw, cruciate socket 1-271149216 2.0 mm x 16 mm self-tapping screw, cruciate socket 1-271149218 2.0 mm x 18 mm self-tapping screw, cruciate socket 1-271149220 2.0 mm x 20 mm self-tapping screw, cruciate socket 1-271149222 2.0 mm x 22 mm self-tapping screw, cruciate socket 1-271149224 2.0 mm x 24 mm self-tapping screw, cruciate socket 1-271149226 2.0 mm x 26 mm self-tapping screw, cruciate socket 1-271149228 2.0 mm x 28 mm self-tapping screw, cruciate socket 1-271149230 2.0 mm x 30 mm self-tapping screw, cruciate socket 1-271149232 2.0 mm x 32 mm self-tapping screw, cruciate socket 1-271149234 2.0 mm x 34 mm self-tapping screw, cruciate socket 1-271149236 2.0 mm x 36 mm self-tapping screw, cruciate socket 1-271149238 2.0 mm x 38 mm self-tapping screw, cruciate socket 1-2

N U M E R I C A L I N D E XCatalog No. Description Page No. Catalog No. Description Page No.

6-3

71149306 2.0 mm x 6 mm self-tapping screw, hex socket 1-271149308 2.0 mm x 8 mm self-tapping screw, hex socket 1-271149310 2.0 mm x 10 mm self-tapping screw, hex socket 1-271149312 2.0 mm x 12 mm self-tapping screw, hex socket 1-271149314 2.0 mm x 14 mm self-tapping screw, hex socket 1-271149316 2.0 mm x 16 mm self-tapping screw, hex socket 1-271149318 2.0 mm x 18 mm self-tapping screw, hex socket 1-271149320 2.0 mm x 20 mm self-tapping screw, hex socket 1-271149322 2.0 mm x 22 mm self-tapping screw, hex socket 1-271149324 2.0 mm x 24 mm self-tapping screw, hex socket 1-271149326 2.0 mm x 26 mm self-tapping screw, hex socket 1-271149328 2.0 mm x 28 mm self-tapping screw, hex socket 1-271149330 2.0 mm x 30 mm self-tapping screw, hex socket 1-271149332 2.0 mm x 32 mm self-tapping screw, hex socket 1-271149334 2.0 mm x 34 mm self-tapping screw, hex socket 1-271149336 2.0 mm x 36 mm self-tapping screw, hex socket 1-271149338 2.0 mm x 38 mm self-tapping screw, hex socket 1-2

71149406 2.7 mm x 6 mm self-tapping screw, hex socket 1-371149408 2.7 mm x 8 mm self-tapping screw, hex socket 1-371149410 2.7 mm x 10 mm self-tapping screw, hex socket 1-371149412 2.7 mm x 12 mm self-tapping screw, hex socket 1-371149414 2.7 mm x 14 mm self-tapping screw, hex socket 1-371149416 2.7 mm x 16 mm self-tapping screw, hex socket 1-371149418 2.7 mm x 18 mm self-tapping screw, hex socket 1-371149420 2.7 mm x 20 mm self-tapping screw, hex socket 1-371149422 2.7 mm x 22 mm self-tapping screw, hex socket 1-371149424 2.7 mm x 24 mm self-tapping screw, hex socket 1-371149426 2.7 mm x 26 mm self-tapping screw, hex socket 1-371149428 2.7 mm x 28 mm self-tapping screw, hex socket 1-371149430 2.7 mm x 30 mm self-tapping screw, hex socket 1-371149432 2.7 mm x 32 mm self-tapping screw, hex socket 1-371149434 2.7 mm x 34 mm self-tapping screw, hex socket 1-371149436 2.7 mm x 36 mm self-tapping screw, hex socket 1-371149438 2.7 mm x 38 mm self-tapping screw, hex socket 1-371149440 2.7 mm x 40 mm self-tapping screw, hex socket 1-371149445 2.7 mm x 45 mm self-tapping screw, hex socket 1-371149450 2.7 mm x 50 mm self-tapping screw, hex socket 1-371149455 2.7 mm x 55 mm self-tapping screw, hex socket 1-3

71149510 3.5 mm x 10 mm self-tapping screw, hex socket 1-471149512 3.5 mm x 12 mm self-tapping screw, hex socket 1-471149514 3.5 mm x 14 mm self-tapping screw, hex socket 1-471149516 3.5 mm x 16 mm self-tapping screw, hex socket 1-471149518 3.5 mm x 18 mm self-tapping screw, hex socket 1-471149520 3.5 mm x 20 mm self-tapping screw, hex socket 1-471149522 3.5 mm x 22 mm self-tapping screw, hex socket 1-471149524 3.5 mm x 24 mm self-tapping screw, hex socket 1-471149526 3.5 mm x 26 mm self-tapping screw, hex socket 1-471149528 3.5 mm x 28 mm self-tapping screw, hex socket 1-471149530 3.5 mm x 30 mm self-tapping screw, hex socket 1-471149532 3.5 mm x 32 mm self-tapping screw, hex socket 1-471149534 3.5 mm x 34 mm self-tapping screw, hex socket 1-471149536 3.5 mm x 36 mm self-tapping screw, hex socket 1-471149538 3.5 mm x 38 mm self-tapping screw, hex socket 1-471149540 3.5 mm x 40 mm self-tapping screw, hex socket 1-471149545 3.5 mm x 45 mm self-tapping screw, hex socket 1-471149550 3.5 mm x 50 mm self-tapping screw, hex socket 1-471149555 3.5 mm x 55 mm self-tapping screw, hex socket 1-471149560 3.5 mm x 60 mm self-tapping screw, hex socket 1-471149565 3.5 mm x 65 mm self-tapping screw, hex socket 1-471149570 3.5 mm x 70 mm self-tapping screw, hex socket 1-471149575 3.5 mm x 75 mm self-tapping screw, hex socket 1-471149580 3.5 mm x 80 mm self-tapping screw, hex socket 1-471149585 3.5 mm x 85 mm self-tapping screw, hex socket 1-471149590 3.5 mm x 90 mm self-tapping screw, hex socket 1-471149595 3.5 mm x 95 mm self-tapping screw, hex socket 1-471149600 3.5 mm x 100 mm self-tapping screw, hex socket 1-471149605 3.5 mm x 105 mm self-tapping screw, hex socket 1-471149610 3.5 mm x 110 mm self-tapping screw, hex socket 1-471149615 3.5 mm x 115 mm self-tapping screw, hex socket, sterile 1-471149620 3.5 mm x 120 mm self-tapping screw, hex socket, sterile 1-471149625 3.5 mm x 125 mm self-tapping screw, hex socket, sterile 1-471149630 3.5 mm x 130 mm self-tapping screw, hex socket, sterile 1-4

71149714 4.5 mm x 14 mm self-tapping screw, hex socket 1-671149716 4.5 mm x 16 mm self-tapping screw, hex socket 1-671149718 4.5 mm x 18 mm self-tapping screw, hex socket 1-671149720 4.5 mm x 20 mm self-tapping screw, hex socket 1-671149722 4.5 mm x 22 mm self-tapping screw, hex socket 1-671149724 4.5 mm x 24 mm self-tapping screw, hex socket 1-671149726 4.5 mm x 26 mm self-tapping screw, hex socket 1-671149728 4.5 mm x 28 mm self-tapping screw, hex socket 1-671149730 4.5 mm x 30 mm self-tapping screw, hex socket 1-671149732 4.5 mm x 32 mm self-tapping screw, hex socket 1-671149734 4.5 mm x 34 mm self-tapping screw, hex socket 1-671149736 4.5 mm x 36 mm self-tapping screw, hex socket 1-671149738 4.5 mm x 38 mm self-tapping screw, hex socket 1-671149740 4.5 mm x 40 mm self-tapping screw, hex socket 1-671149742 4.5 mm x 42 mm self-tapping screw, hex socket 1-671149744 4.5 mm x 44 mm self-tapping screw, hex socket 1-671149746 4.5 mm x 46 mm self-tapping screw, hex socket 1-671149748 4.5 mm x 48 mm self-tapping screw, hex socket 1-671149750 4.5 mm x 50 mm self-tapping screw, hex socket 1-671149752 4.5 mm x 52 mm self-tapping screw, hex socket 1-671149754 4.5 mm x 54 mm self-tapping screw, hex socket 1-671149756 4.5 mm x 56 mm self-tapping screw, hex socket 1-671149758 4.5 mm x 58 mm self-tapping screw, hex socket 1-671149760 4.5 mm x 60 mm self-tapping screw, hex socket 1-671149762 4.5 mm x 62 mm self-tapping screw, hex socket 1-671149764 4.5 mm x 64 mm self-tapping screw, hex socket 1-671149766 4.5 mm x 66 mm self-tapping screw, hex socket 1-671149768 4.5 mm x 68 mm self-tapping screw, hex socket 1-671149770 4.5 mm x 70 mm self-tapping screw, hex socket 1-671149772 4.5 mm x 72 mm self-tapping screw, hex socket 1-671149776 4.5 mm x 76 mm self-tapping screw, hex socket 1-671149780 4.5 mm x 80 mm self-tapping screw, hex socket 1-671149785 4.5 mm x 85 mm self-tapping screw, hex socket 1-671149790 4.5 mm x 90 mm self-tapping screw, hex socket 1-671149795 4.5 mm x 95 mm self-tapping screw, hex socket 1-671149800 4.5 mm x 100 mm self-tapping screw, hex socket 1-671149805 4.5 mm x 105 mm self-tapping screw, hex socket 1-671149810 4.5 mm x 110 mm self-tapping screw, hex socket 1-671149815 4.5 mm x 115 mm self-tapping screw, hex socket 1-671149820 4.5 mm x 120 mm self-tapping screw, hex socket 1-671149825 4.5 mm x 125 mm self-tapping screw, hex socket 1-671149830 4.5 mm x 130 mm self-tapping screw, hex socket 1-671149835 4.5 mm x 135 mm self-tapping screw, hex socket 1-671149840 4.5 mm x 140 mm self-tapping screw, hex socket 1-671149845 4.5 mm x 145 mm self-tapping screw, hex socket 1-6

71161008 0.8 mm K-wire, 150 mm trocar point 5-1(6/box), sterile





71161066 0.6 mm K-wire, 70 mm trocar point 5-1(6/box), sterile (formerly 71162006)

71162006 0.6 mm K-wire, 70 mm trocar point 5-1(6/box), sterile (now 71161066)

71161506 1.5 mm x 6 mm cortex screw, hex socket 1-171161507 1.5 mm x 7 mm cortex screw, hex socket 1-171161508 1.5 mm x 8 mm cortex screw, hex socket 1-171161509 1.5 mm x 9 mm cortex screw, hex socket 1-171161510 1.5 mm x 10 mm cortex screw, hex socket 1-171161511 1.5 mm x 11 mm cortex screw, hex socket 1-171161512 1.5 mm x 12 mm cortex screw, hex socket 1-171161514 1.5 mm x 14 mm cortex screw, hex socket 1-171161516 1.5 mm x 16 mm cortex screw, hex socket 1-171161518 1.5 mm x 18 mm cortex screw, hex socket 1-171161520 1.5 mm x 20 mm cortex screw, hex socket 1-1


6-4

71161606 1.5 mm x 6 mm cortex screw, cruciate socket 1-171161607 1.5 mm x 7 mm cortex screw, cruciate socket 1-171161608 1.5 mm x 8 mm cortex screw, cruciate socket 1-171161609 1.5 mm x 9 mm cortex screw, cruciate socket 1-171161610 1.5 mm x 10 mm cortex screw, cruciate socket 1-171161611 1.5 mm x 11 mm cortex screw, cruciate socket 1-171161612 1.5 mm x 12 mm cortex screw, cruciate socket 1-171161614 1.5 mm x 14 mm cortex screw, cruciate socket 1-171161616 1.5 mm x 16 mm cortex screw, cruciate socket 1-171161618 1.5 mm x 18 mm cortex screw, cruciate socket 1-171161620 1.5 mm x 20 mm cortex screw, cruciate socket 1-1

71162006 0.6 mm K-wire, 70 mm trocar point 5-1(6/box), sterile (see 71161066)

71162206 2.0 mm x 6 mm cortex screw, hex socket 1-271162008 2.0 mm x 8 mm cortex screw, hex socket 1-271162010 2.0 mm x 10 mm cortex screw, hex socket 1-271162012 2.0 mm x 12 mm cortex screw, hex socket 1-271162014 2.0 mm x 14 mm cortex screw, hex socket 1-271162016 2.0 mm x 16 mm cortex screw, hex socket 1-271162018 2.0 mm x 18 mm cortex screw, hex socket 1-271162020 2.0 mm x 20 mm cortex screw, hex socket 1-271162022 2.0 mm x 22 mm cortex screw, hex socket 1-271162024 2.0 mm x 24 mm cortex screw, hex socket 1-271162026 2.0 mm x 26 mm cortex screw, hex socket 1-271162028 2.0 mm x 28 mm cortex screw, hex socket 1-271162030 2.0 mm x 30 mm cortex screw, hex socket 1-271162032 2.0 mm x 32 mm cortex screw, hex socket 1-271162034 2.0 mm x 34 mm cortex screw, hex socket, sterile 1-271162036 2.0 mm x 36 mm cortex screw, hex socket, sterile 1-271162038 2.0 mm x 38 mm cortex screw, hex socket, sterile 1-2

71162106 2.0 mm x 6 mm cortex screw, cruciate socket 1-271162108 2.0 mm x 8 mm cortex screw, cruciate socket 1-271162110 2.0 mm x 10 mm cortex screw, cruciate socket 1-271162112 2.0 mm x 12 mm cortex screw, cruciate socket 1-271162114 2.0 mm x 14 mm cortex screw, cruciate socket 1-271162116 2.0 mm x 16 mm cortex screw, cruciate socket 1-271162118 2.0 mm x 18 mm cortex screw, cruciate socket 1-271162120 2.0 mm x 20 mm cortex screw, cruciate socket 1-271162122 2.0 mm x 22 mm cortex screw, cruciate socket 1-271162124 2.0 mm x 24 mm cortex screw, cruciate socket 1-271162126 2.0 mm x 26 mm cortex screw, cruciate socket 1-271162128 2.0 mm x 28 mm cortex screw, cruciate socket 1-271162130 2.0 mm x 30 mm cortex screw, cruciate socket 1-271162132 2.0 mm x 32 mm cortex screw, cruciate socket 1-271162134 2.0 mm x 34 mm cortex screw, cruciate socket, sterile 1-271162136 2.0 mm x 36 mm cortex screw, cruciate socket, sterile 1-271162138 2.0 mm x 38 mm cortex screw, cruciate socket, sterile 1-2

71163006 0.6 mm cerclage wire x 175 mm (6/box), sterile 5-171163008 0.8 mm cerclage wire x 200 mm (6/box), sterile 5-1

71170001 1.1 mm drill bit, 60 mm/35 mm, quick coupling 3-171170002 screw forceps, mini 3-2071170003 1.5 mm drill bit, 85 mm/60 mm, quick coupling 3-171170005 2.0 mm drill bit, 100 mm/75 mm, quick coupling 3-171170007 2.7 mm drill bit, 100 mm/75 mm, quick coupling 3-171170009 countersink, 1.5 mm/2.0 mm screws 3-271170012 quick connect adaptor, mini PF na71170013 mini quick coupling handle 3-671170014 mini quick coupling handle, bulb 3-671170015 small quick coupling handle 3-671170017 1.5 mm tap 3-271170019 2.0 mm tap 3-271170021 2.7 mm tap 3-271170023 1.1 mm/1.5 mm double drill sleeve 3-371170025 1.5 mm/2.0 mm double drill sleeve 3-371170027 2.0 mm/2.7 mm double drill sleeve 3-371170029 small hex screwdriver w/notches 3-771170031 holding sleeve, small hex screwdriver, split 3-871170033 small hex screwdriver shaft, quick coupling 3-671170034 holding sleeve for mini cruciform & hex shafts 3-8

71170035 self-holding sleeve for mini screws 3-871170036 mini hex screwdriver shaft 3-671170037 mini cruciform screwdriver shaft 3-671170038 depth gauge, 1.5/2.0/2.7 mm screws, 38 mm 3-1971170039 depth gauge, 2.7/3.5/4.0 mm screws, 50 mm 3-1971170041 depth gauge, 1.5 mm/2.0 mm screws, 30 mm 3-1971170042 plate cutting forceps, shear cut 3-971170043 sharp hook 3-1971170044 reduction forceps w/points & ratchet, 205 mm 3-1171170045 screw forceps, standard 3-2071170046 self-centering forceps w/speed lock, 240 mm 3-1171170047 plate cutting forceps 3-971170048 self-centering forceps w/speed lock, 280 mm 3-1171170049 reduction forceps w/points, narrow 3-1071170050 reduction forceps w/speed lock, 240 mm 3-1271170051 reduction forceps w/points, broad 3-1071170052 reduction forceps w/points, 130 mm, ratchet 3-1071170053 stagbeetle forceps, 120 mm 3-1071170054 plate/bone holding forceps w/foot 3-971170055 hohmann retractor, 6 mm width 3-1771170056 plate/bone holding forceps 3-971170057 hohmann retractor, 8 mm width 3-1771170059 periosteal elevator, 3 mm width 3-1871170061 bending pliers for 1.5 mm/2.0 mm plates 3-1671170063 wire bending pliers, 140 mm length 3-1771170065 wire cutter, 175 mm length 3-1471170068 bending iron for mini plates 3-1571170071 2.5 mm drill bit, 110 mm/85 mm, quick coupling, gold 3-171170072 quick connect adaptor for jacobs chuck 3-571170073 3.5 mm drill bit, 110 mm/85 mm, quick coupling 3-171170075 countersink for 2.7 mm, 3.5 mm & 4.0 mm screws 3-271170076 bending pliers, 2.7 mm/3.5 mm plates 3-1671170077 3.5 mm tap for cortex bone screws, gold 3-271170078 wire cutter, 220 mm 3-1471170079 4.0 mm tap for cancellous bone screws 3-271170081 2.7 mm drill guide, neutral and load 3-471170083 2.0 mm parallel drill guide/sleeve 3-471170085 2.5 mm/3.5 mm double drill sleeve 3-371170086 3.5 mm drill guide, neutral & load 3-471170087 3.5 mm universal drill guide 3-571170089 2.5 mm/3.5 mm insert drill sleeve 3-471170091 verbrugge self-centering forceps, size 0 3-1171170092 self-centering forceps, 150 mm 3-1171170093 reduction forceps w/serrated jaws 3-1271170095 hohmann retractor, 15 mm width 3-1771170097 periosteal elevator, 6 mm round edge 3-1871170098 periosteal elevator, 6 mm straight edge 3-1871170099 bending irons, 1.25 mm – 2.0 mm k-wires 3-1571170101 bending irons, 2.7 mm/3.5 mm plates, left 3-1471170103 bending irons, 2.7 mm/3.5 mm plates, right 3-1471170105 bending template, 5 holes 3-1771170107 bending template, 7 holes 3-1771170109 bending template, 9 holes, large frag plates 3-1771170111 3.2 mm drill bit, 145 mm/120 mm, quick coupling 3-171170112 bending template, 12 holes, large frag plates 3-1771170113 4.5 mm drill bit, 145 mm/120 mm, quick coupling 3-171170115 countersink for 4.5 mm/6.5 mm screws 3-271170117 small quick coupling t-handle 3-571170119 4.5 mm tap 3-271170121 6.5 mm tap 3-271170123 4.5 mm/3.2 mm double drill sleeve 3-371170125 4.5 mm/3.2 mm insert drill sleeve 3-471170127 6.5 mm/3.2 mm double drill sleeve 3-371170129 4.5 mm drill guide, neutral & load 3-471170131 4.5 mm universal drill guide 3-571170133 large hex screwdriver w/grooves 3-771170135 holding sleeve for large hex screwdriver 3-871170137 large hex screwdriver shaft 3-871170139 depth gauge for 4.5 mm/6.5 mm screws, 110 mm 3-1971170141 combination wrench, 11 mm 3-2071170142 wrench for nut (for 7114-3045) 5-171170143 socket wrench w/universal joint, 11 mm 3-2071170145 articulated tension device w/gauge 3-2071170147 3.5 mm drill bit, 195 mm/170 mm, quick coupling 3-1


6-5

71170149 4.5 mm drill bit, 195 mm/170 mm, quick coupling 3-171170151 4.5 mm 196 mm/170 mm, three-fluted drill bit, QC 3-271170153 2.5 mm 230 mm/205 mm, three-fluted drill bit, QC 3-271170155 3.2 mm 230 mm/205 mm, three-fluted drill bit, QC 3-271170157 3.5 mm calibrated tap 3-271170159 4.5 mm calibrated tap 3-271170161 large hex screwdriver, pelvic 3-771170163 large hex screwdriver shaft w/grooves 3-871170165 small hex screwdriver, 10" 3-771170167 holding sleeve for small hex screwdriver 3-871170169 small hex screwdriver shaft, long 3-671170171 depth gauge for pelvic screws, 120 mm 3-1971170173 bending iron, 3.5 mm recon plates 3-1571170174 bending (twisting) iron for 4.5 mm plates 3-1571170175 bending pliers for 3.5 mm recon plates 3-1671170176 large bending press 3-1571170177 bending template, 3.5 mm recon plates, straight 3-1771170179 bending template, 3.5 mm recon plates, curved 3-1771170181 bending template, 4.5 mm recon plates, straight 3-1771170183 universal chuck w/t-handle 3-1971170185 volkman bone hook, medium 3-1871170187 large bone hook 3-1871170189 straight ball spike 3-1871170191 blunt pelvic retractor 3-1771170193 spiked disk 3-1871170195 farabeuf forceps, 190 mm 3-1271170197 farabeuf forceps, 250 mm 3-1271170199 reduction forceps, pointed-ball tips, 200 mm 3-1371170203 reduction forceps, pointed-ball tips, 240 mm 3-1371170205 reduction forceps, angled pointed-ball tips, 250 mm 3-1371170207 reduction forceps, pointed-ball tips, 400 mm 3-1371170209 reduction forceps, 3-pointed-ball tips, 400 mm 3-1371170211 reduction forceps for use w/screws 3-1271170213 asymmetric pelvic reduction forceps 3-1371170215 self-centering forceps w/speed lock, 260 mm 3-1171170217 reduction forceps w/speed lock, 170 mm 3-1271170315 6.0 mm schanz screw, 190 mm diamond point 5-171171001 mini fragment tray for instruments & implants 4-171171005 bending template, 5 holes, small frag plates 3-1771171007 bending template, 7 holes, small frag plates 3-1771171009 bending template, 9 holes, small frag plates 3-1771171012 bending template, 12 holes, small frag plates 3-1771171035 small hex screwdriver shaft w/notches 3-771172001 small fragment tray for instruments & implants 4-171173001 large instrument tray 4-271173003 screw caddy for 4.5 mm/6.5 mm screws 4-171173005 large implant tray 4-271174001 pelvic instrument tray 4-271174003 pelvic reduction instrument tray 4-371174005 pelvic implant tray 4-371175005 blade plate instrument tray 4-371175013 triple drill guide 3-2171175015 router, quick coupling 3-2171175017 router, jacobs chuck 3-2171175100 chisel guide with adjustable angle 3-2171175114 seating chisel, for adolescent & child 3-2271175126 seating chisel, for infant, 260 mm 3-2171175128 seating chisel, for adult, 284 mm 3-2171175132 seating chisel, for adult, 320 mm 3-2171175200 inserter-extractor, for adult & small statured adult 3-2271175210 inserter-extractor, for adolescent & child 3-2271175225 inserter for bifurcated infant plate 3-2271175300 slotted hammer 3-2371175325 hammer, 500g 3-2471175350 impactor 3-2271175400 triangular positioning plate, 90/50/40 3-2371175410 triangular positioning plate, 80/70/30 3-2371175420 triangular positioning plate, 100/60/20 3-2371175430 triangular positioning plate, 110/60/10 3-2371175450 quadrangular positioning plate, 110/90/90/70 3-2471175460 condylar plate guide 3-2471175500 chisel handle 3-2571175505 chisel blade, 5 mm 3-2571175510 chisel blade, 10 mm 3-25

71175516 chisel blade, 16 mm 3-2571175525 chisel blade, 25 mm 3-2571175526 radiographic templates, blade plates 5-271175545 4.5 mm drill guide, hip 3-2471176011 1.1 mm drill bit, 60 mm/35 mm, quick coupling, sterile 3-171176015 1.5 mm drill bit, 85 mm/60 mm, quick coupling, sterile 3-171176016 1.5 mm drill bit, 110 mm/85 mm, quick coupling, sterile 3-171176020 2.0 mm drill bit, 100 mm/75 mm, quick coupling, sterile 3-171176021 2.0 mm drill bit, 125 mm/100 mm, quick coupling, sterile 3-171176025 2.5 mm drill bit, 110 mm/85 mm, quick coupling, gold, sterile 3-171176026 2.5 mm drill bit, 180 mm/155 mm, quick coupling, gold, sterile 3-171176027 2.7 mm drill bit, 100 mm/75 mm, quick coupling, sterile 3-171176028 2.7 mm drill bit, 125 mm/100 mm, quick coupling, sterile 3-171176032 3.2 mm drill bit, 145 mm/120 mm, quick coupling, sterile 3-171176033 3.2 mm drill bit, 195 mm/170 mm, quick coupling, sterile 3-171176035 3.5 mm drill bit, 110 mm/85 mm, quick coupling, sterile 3-171176037 3.5 mm drill bit, 195 mm/170 mm, quick coupling, sterile 3-171176045 4.5 mm drill bit, 145 mm/120 mm, quick coupling, sterile 3-171176047 4.5 mm drill bit, 195 mm/170 mm, quick coupling, sterile 3-171176125 2.5 mm 230 mm/205 mm, three-fluted drill bit, QC, sterile 3-271176132 3.2 mm 230 mm/205 mm, three-fluted drill bit, QC, sterile 3-271176145 4.5 mm 196 mm/170 mm, three-fluted drill bit, QC, sterile 3-271176511 1.1 mm drill bit, 45 mm length, sterile 3-171176516 1.5 mm drill bit, 95 mm length, sterile 3-171176521 2.0 mm drill bit, 110 mm length, sterile 3-171176525 2.5 mm drill bit, 95 mm length, gold, sterile 3-171176528 2.7 mm drill bit, 110 mm/97 mm, sterile 3-171176532 3.2 mm drill bit, 130 mm/115 mm, sterile 3-171176533 3.2 mm drill bit, 180 mm/165 mm, sterile 3-171176535 3.5 mm drill bit, 95 mm/80 mm, sterile 3-171176537 3.5 mm drill bit, 180 mm/165 mm, sterile 3-171176545 4.5 mm drill bit, 130 mm/115 mm, sterile 3-171176547 4.5 mm drill bit, 180 mm/165 mm, sterile 3-1

71220006 2.7 mm x 6 mm cortex screw 1-371220008 2.7 mm x 8 mm cortex screw 1-371220010 2.7 mm x 10 mm cortex screw 1-371220012 2.7 mm x 12 mm cortex screw 1-371220014 2.7 mm x 14 mm cortex screw 1-371220016 2.7 mm x 16 mm cortex screw 1-371220018 2.7 mm x 18 mm cortex screw 1-371220020 2.7 mm x 20 mm cortex screw 1-371220022 2.7 mm x 22 mm cortex screw 1-371220024 2.7 mm x 24 mm cortex screw 1-371220026 2.7 mm x 26 mm cortex screw 1-371220028 2.7 mm x 28 mm cortex screw 1-371220030 2.7 mm x 30 mm cortex screw 1-371220032 2.7 mm x 32 mm cortex screw 1-371220034 2.7 mm x 34 mm cortex screw 1-371220036 2.7 mm x 36 mm cortex screw 1-371220038 2.7 mm x 38 mm cortex screw 1-371220040 2.7 mm x 40 mm cortex screw 1-371220045 2.7 mm x 45 mm cortex screw, sterile 1-371220050 2.7 mm x 50 mm cortex screw, sterile 1-371220055 2.7 mm x 55 mm cortex screw, sterile 1-3

71222010 3.5 mm x 10 mm cortex screw 1-471222012 3.5 mm x 12 mm cortex screw 1-471222014 3.5 mm x 14 mm cortex screw 1-471222016 3.5 mm x 16 mm cortex screw 1-471222018 3.5 mm x 18 mm cortex screw 1-471222020 3.5 mm x 20 mm cortex screw 1-471222022 3.5 mm x 22 mm cortex screw 1-471222024 3.5 mm x 24 mm cortex screw 1-471222026 3.5 mm x 26 mm cortex screw 1-471222028 3.5 mm x 28 mm cortex screw 1-471222030 3.5 mm x 30 mm cortex screw 1-471222032 3.5 mm x 32 mm cortex screw 1-471222034 3.5 mm x 34 mm cortex screw 1-471222036 3.5 mm x 36 mm cortex screw 1-471222038 3.5 mm x 38 mm cortex screw 1-471222040 3.5 mm x 40 mm cortex screw 1-471222045 3.5 mm x 45 mm cortex screw 1-471222050 3.5 mm x 50 mm cortex screw 1-4


6-6

71222055 3.5 mm x 55 mm cortex screw 1-471222060 3.5 mm x 60 mm cortex screw 1-471222065 3.5 mm x 65 mm cortex screw 1-471222070 3.5 mm x 70 mm cortex screw 1-471222075 3.5 mm x 75 mm cortex screw 1-471222080 3.5 mm x 80 mm cortex screw 1-471222085 3.5 mm x 85 mm cortex screw 1-471222090 3.5 mm x 90 mm cortex screw 1-471222095 3.5 mm x 95 mm cortex screw 1-471222100 3.5 mm x 100 mm cortex screw 1-471222105 3.5 mm x 105 mm cortex screw 1-471222110 3.5 mm x 110 mm cortex screw 1-471222115 3.5 mm x 115 mm cortex screw 1-471222120 3.5 mm x 120 mm cortex screw 1-471222125 3.5 mm x 125 mm cortex screw, sterile 1-471222130 3.5 mm x 130 mm cortex screw, sterile 1-4

71223010 4.0 mm x 10 mm full thread cancellous screw 1-571223012 4.0 mm x 12 mm full thread cancellous screw 1-571223014 4.0 mm x 14 mm full thread cancellous screw 1-571223016 4.0 mm x 16 mm full thread cancellous screw 1-571223018 4.0 mm x 18 mm full thread cancellous screw 1-571223020 4.0 mm x 20 mm full thread cancellous screw 1-571223022 4.0 mm x 22 mm full thread cancellous screw 1-571223024 4.0 mm x 24 mm full thread cancellous screw 1-571223026 4.0 mm x 26 mm full thread cancellous screw 1-571223028 4.0 mm x 28 mm full thread cancellous screw 1-571223030 4.0 mm x 30 mm full thread cancellous screw 1-571223032 4.0 mm x 32 mm full thread cancellous screw 1-571223035 4.0 mm x 35 mm full thread cancellous screw 1-571223036 4.0 mm x 36 mm full thread cancellous screw 1-571223040 4.0 mm x 40 mm full thread cancellous screw 1-571223045 4.0 mm x 45 mm full thread cancellous screw 1-571223050 4.0 mm x 50 mm full thread cancellous screw 1-571223055 4.0 mm x 55 mm full thread cancellous screw 1-571223060 4.0 mm x 60 mm full thread cancellous screw 1-571223065 4.0 mm x 65 mm full thread cancellous screw 1-571223070 4.0 mm x 70 mm full thread cancellous screw 1-571223075 4.0 mm x 75 mm full thread cancellous screw 1-571223080 4.0 mm x 80 mm full thread cancellous screw 1-571223085 4.0 mm x 85 mm full thread cancellous screw 1-571223090 4.0 mm x 90 mm full thread cancellous screw 1-571223095 4.0 mm x 95 mm full thread cancellous screw 1-571223100 4.0 mm x 100 mm full thread cancellous screw 1-5

71223210 4.0 mm x 10 mm partially threaded cancellous screw 1-571223212 4.0 mm x 12 mm partially threaded cancellous screw 1-571223214 4.0 mm x 14 mm partially threaded cancellous screw 1-571223216 4.0 mm x 16 mm partially threaded cancellous screw 1-571223218 4.0 mm x 18 mm partially threaded cancellous screw 1-571223220 4.0 mm x 20 mm partially threaded cancellous screw 1-571223222 4.0 mm x 22 mm partially threaded cancellous screw 1-571223224 4.0 mm x 24 mm partially threaded cancellous screw 1-571223226 4.0 mm x 26 mm partially threaded cancellous screw 1-571223228 4.0 mm x 28 mm partially threaded cancellous screw 1-571223230 4.0 mm x 30 mm partially threaded cancellous screw 1-571223235 4.0 mm x 35 mm partially threaded cancellous screw 1-571223240 4.0 mm x 40 mm partially threaded cancellous screw 1-571223245 4.0 mm x 45 mm partially threaded cancellous screw 1-571223250 4.0 mm x 50 mm partially threaded cancellous screw 1-571223255 4.0 mm x 55 mm partially threaded cancellous screw 1-571223260 4.0 mm x 60 mm partially threaded cancellous screw 1-571223265 4.0 mm x 65 mm partially threaded cancellous screw 1-571223270 4.0 mm x 70 mm partially threaded cancellous screw 1-571223275 4.0 mm x 75 mm partially threaded cancellous screw 1-571223280 4.0 mm x 80 mm partially threaded cancellous screw 1-571223285 4.0 mm x 85 mm partially threaded cancellous screw 1-571223290 4.0 mm x 90 mm partially threaded cancellous screw 1-571223295 4.0 mm x 95 mm partially threaded cancellous screw 1-571223300 4.0 mm x 100 mm partially threaded cancellous screw 1-5

71225014 4.5 mm x 14 mm cortex screw 1-671225016 4.5 mm x 16 mm cortex screw 1-671225018 4.5 mm x 18 mm cortex screw 1-6

71225020 4.5 mm x 20 mm cortex screw 1-671225022 4.5 mm x 22 mm cortex screw 1-671225024 4.5 mm x 24 mm cortex screw 1-671225026 4.5 mm x 26 mm cortex screw 1-671225028 4.5 mm x 28 mm cortex screw 1-671225030 4.5 mm x 30 mm cortex screw 1-671225032 4.5 mm x 32 mm cortex screw 1-671225034 4.5 mm x 34 mm cortex screw 1-671225036 4.5 mm x 36 mm cortex screw 1-671225038 4.5 mm x 38 mm cortex screw 1-671225040 4.5 mm x 40 mm cortex screw 1-671225042 4.5 mm x 42 mm cortex screw 1-671225044 4.5 mm x 44 mm cortex screw 1-671225046 4.5 mm x 46 mm cortex screw 1-671225048 4.5 mm x 48 mm cortex screw 1-671225050 4.5 mm x 50 mm cortex screw 1-671225052 4.5 mm x 52 mm cortex screw 1-671225054 4.5 mm x 54 mm cortex screw 1-671225056 4.5 mm x 56 mm cortex screw 1-671225058 4.5 mm x 58 mm cortex screw 1-671225060 4.5 mm x 60 mm cortex screw 1-671225062 4.5 mm x 62 mm cortex screw 1-671225064 4.5 mm x 64 mm cortex screw 1-671225066 4.5 mm x 66 mm cortex screw 1-671225068 4.5 mm x 68 mm cortex screw 1-671225070 4.5 mm x 70 mm cortex screw 1-671225072 4.5 mm x 72 mm cortex screw 1-671225076 4.5 mm x 76 mm cortex screw 1-671225080 4.5 mm x 80 mm cortex screw 1-671225085 4.5 mm x 85 mm cortex screw 1-671225090 4.5 mm x 90 mm cortex screw 1-671225095 4.5 mm x 95 mm cortex screw 1-671225100 4.5 mm x 100 mm cortex screw 1-671225105 4.5 mm x 105 mm cortex screw 1-671225110 4.5 mm x 110 mm cortex screw 1-671225115 4.5 mm x 115 mm cortex screw 1-671225120 4.5 mm x 120 mm cortex screw 1-671225125 4.5 mm x 125 mm cortex screw 1-671225130 4.5 mm x 130 mm cortex screw 1-671225135 4.5 mm x 135 mm cortex screw 1-671225140 4.5 mm x 140 mm cortex screw 1-671225145 4.5 mm x 145 mm cortex screw 1-6

71225225 4.5 x 25 mm x 12 mm malleolar screw, sterile 1-771225230 4.5 x 30 mm x 15 mm malleolar screw, sterile 1-771225235 4.5 x 35 mm x 18 mm malleolar screw, sterile 1-771225240 4.5 x 40 mm x 20 mm malleolar screw, sterile 1-771225245 4.5 x 45 mm x 22 mm malleolar screw, sterile 1-771225250 4.5 x 50 mm x 24 mm malleolar screw, sterile 1-771225255 4.5 x 55 mm x 26 mm malleolar screw, sterile 1-771225260 4.5 x 60 mm x 28 mm malleolar screw, sterile 1-771225265 4.5 x 65 mm x 30 mm malleolar screw, sterile 1-771225270 4.5 x 70 mm x 32 mm malleolar screw, sterile 1-7

71225320 adult osteotomy PL. 4H, 90,° D:10 mm, B:40 mm 2-1471225321 adult osteotomy PL. 4H, 90,° D:10 mm, B:50 mm 2-1471225322 adult osteotomy PL. 4H, 90,° D:10 mm, B:55 mm 2-1471225323 adult osteotomy PL. 4H, 90,° D:10 mm, B:60 mm 2-1471225324 adult osteotomy PL. 4H, 90,° D:10 mm, B:65 mm 2-1471225325 adult osteotomy PL. 4H, 90,° D:10 mm, B:70 mm 2-1471225326 adult osteotomy PL. 4H, 90,° D:10 mm, B:80 mm 2-1471225327 adult osteotomy PL. 4H, 90,° D:15 mm, B:40 mm 2-1471225328 adult osteotomy PL. 4H, 90,° D:15 mm, B:50 mm 2-1471225329 adult osteotomy PL. 4H, 90,° D:15 mm, B:55 mm 2-1471225330 adult osteotomy PL. 4H, 90,° D:15 mm, B:60 mm 2-1471225331 adult osteotomy PL. 4H, 90,° D:15 mm, B:65 mm 2-1471225332 adult osteotomy PL. 4H, 90,° D:15 mm, B:70 mm 2-1471225333 adult osteotomy PL. 4H, 90,° D:15 mm, B:75 mm 2-1471225334 adult osteotomy PL. 4H, 90,° D:15 mm, B:80 mm 2-1471225335 adult osteotomy PL. 4H, 90,° D:20 mm, B:50 mm 2-1471225336 adult osteotomy PL. 4H, 90,° D:20 mm, B:60 mm 2-1471225337 adult osteotomy PL. 4H, 90,° D:20 mm, B:70 mm 2-1471225338 adult osteotomy PL. 4H, 90,° D:20 mm, B:75 mm 2-1471225339 adult osteotomy PL. 4H,100,° D:10 mm, B:50 mm 2-14


6-7

71225340 adult osteotomy PL. 4H,100,° D:10 mm, B:60 mm 2-1471225341 adult osteotomy PL. 4H, 110,° B:65 mm 2-1471225342 adult osteotomy PL. 4H, 110,° B:75 mm 2-1471225343 adult osteotomy PL. 4H, 110,° B:85 mm 2-1471225344 adult osteotomy PL. 4H, 120,° B:65 mm 2-1471225345 adult osteotomy PL. 4H, 120,° B:75 mm 2-1471225346 adult osteotomy PL. 4H, 120,° B:85 mm 2-1471225347 adult osteotomy PL. 4H, 130,° B:65 mm 2-1471225348 adult osteotomy PL. 4H, 130,° B:70 mm 2-1471225349 adult osteotomy PL. 4H, 130,° B:75 mm 2-1471225350 adult osteotomy PL. 4H, 130,° B:80 mm 2-1471225351 adult osteotomy PL. 4H, 130,° B:85 mm 2-1471225352 adult osteotomy PL. 4H, 130,° B:90 mm 2-1471225353 adult osteotomy PL. 4H, 130,° B:95 mm 2-1471225354 adult osteotomy PL. 4H, 130,° B:100 mm 2-1471225355 adult osteotomy PL. 4H, 130,° B:105 mm 2-1471225356 adult osteotomy PL. 4H, 130,° B:110 mm 2-14

71225400 95,° adult condylar, 5H, S:92 mm, B:50 mm 2-1571225401 95,° adult condylar, 5H, S:92 mm, B:60 mm 2-1571225402 95,° adult condylar, 5H, S:92 mm, B:70 mm 2-1571225403 95,° adult condylar, 5H, S:92 mm, B:80 mm 2-1571225404 95,° adult condylar, 7H, S:124 mm, B:50 mm 2-1571225405 95,° adult condylar, 7H, S:124 mm, B:60 mm 2-1571225406 95,° adult condylar, 7H, S:124 mm, B:70 mm 2-1571225407 95,° adult condylar, 7H, S:124 mm, B:80 mm 2-1571225408 95,° adult condylar, 9H, S:156 mm, B:50 mm 2-1571225409 95,° adult condylar, 9H, S:156 mm, B:60 mm 2-1571225410 95,° adult condylar, 9H, S:156 mm, B:70 mm 2-1571225411 95,° adult condylar, 9H, S:156 mm, B:80 mm 2-1571225412 95,° adult condylar, 12H, S:204 mm, B:50 mm 2-1571225413 95,° adult condylar, 12H, S:204 mm, B:60 mm 2-1571225414 95,° adult condylar, 12H, S:204 mm, B:70 mm 2-1571225415 95,° adult condylar, 12H, S:204 mm, B:80 mm 2-1571225416 95,° adult condylar, 14H, S:235 mm, B:50 mm 2-1571225417 95,° adult condylar, 14H, S:235 mm, B:60 mm 2-1571225418 95,° adult condylar, 14H, S:235 mm, B:70 mm 2-1571225419 95,° adult condylar, 14H, S:235 mm, B:80 mm 2-1571225420 95,° adult condylar, 16H, S:267 mm, B:60 mm 2-1571225421 95,° adult condylar, 16H, S:267 mm, B:70 mm 2-1571225422 95,° adult condylar, 16H, S:267 mm, B: 80 mm 2-1571225423 95,° adult condylar, 18H, S:299 mm, B:60 mm 2-1571225424 95,° adult condylar, 18H, S:299 mm, B:70 mm 2-1571225425 95,° adult condylar, 18H, S:299 mm, B:80 mm 2-15

71225430 95,° condylar plate, small stature, 5,92 mm, 40 mm 2-1371225431 95,° condylar plate, small stature, 5,92 mm, 50 mm 2-1371225432 95,° condylar plate, small stature, 5,92 mm, 60 mm 2-1371225433 95,° condylar plate, small stature, 5,92 mm, 70 mm 2-1371225434 95,° condylar plate, small stature, 7,124 mm, 40 mm 2-1371225435 95,°condylar plate, small stature, 7,124 mm, 50 mm 2-1371225436 95,°condylar plate, small stature, 7,124 mm, 60 mm 2-1371225437 95,°condylar plate, small stature, 7,124 mm, 70 mm 2-1371225438 95,°condylar plate, small stature, 9,156 mm, 40 mm 2-1371225439 95,°condylar plate, small stature, 9,156 mm, 50 mm 2-1371225440 95,°condylar plate, small stature, 9,156 mm, 60 mm 2-1371225441 95,°condylar plate, small stature, 9,156 mm, 70 mm 2-13

71225500 130,° adult angled blade, 4H, S:60 mm, B:50 mm 2-1671225501 130,° adult angled blade, 4H, S:60 mm, B:60 mm 2-1671225502 130,° adult angled blade, 4H, S:60 mm, B:70 mm 2-1671225503 130,° adult angled blade, 4H, S:60 mm, B:75 mm 2-1671225504 130,° adult angled blade, 4H, S:60 mm, B:80 mm 2-1671225505 130,° adult angled blade, 4H, S:60 mm, B:85 mm 2-1671225506 130,° adult angled blade, 4H, S:60 mm, B:90 mm 2-1671225507 130,° adult angled blade, 4H, S:60 mm, B:95 mm 2-1671225508 130,° adult angled blade, 4H, S:60 mm, B:100 mm 2-1671225509 130,° adult angled blade, 4H, S:60 mm, B:105 mm 2-1671225510 130,° adult angled blade, 4H, S:60 mm, B:110 mm 2-1671225511 130,° adult angled blade, 6H, S:104 mm, B:50 mm 2-1671225512 130,° adult angled blade, 6H, S:104 mm, B:60 mm 2-1671225513 130,° adult angled blade, 6H, S:104 mm, B:70 mm 2-1671225514 130,° adult angled blade, 6H, S:104 mm, B:80 mm 2-1671225515 130,° adult angled blade, 6H, S:104 mm, B:90 mm 2-16

71225516 130,° adult angled blade, 9H, S:152 mm, B:70 mm 2-1671225517 130,° adult angled blade, 9H, S:152 mm, B:80 mm 2-1671225518 130,° adult angled blade, 9H, S:152 mm, B:90 mm 2-1671225519 130,° adult angled blade, 12H, S:200 mm, B:70 mm 2-1671225520 130,° adult angled blade, 12H, S:200 mm, B:80 mm 2-1671225521 130,° adult angled blade, 12H, S:200 mm, B:90 mm 2-16

71225530 130,° angled blade plate, 4 hole, 60 mm, 50 mm 2-1371225531 130,° angled blade plate, 4 hole, 60 mm, 60 mm 2-1371225532 130,° angled blade plate, 4 hole, 60 mm, 70 mm 2-1371225533 130,° angled blade plate, 4 hole, 60 mm, 80 mm 2-1371225534 130,° angled blade plate, 6 hole, 104 mm, 50 mm 2-1371225535 130,° angled blade plate, 6 hole, 104 mm, 60 mm 2-1371225536 130,° angled blade plate, 6 hole, 104 mm, 70 mm 2-1371225537 130,° angled blade plate, 6 hole, 104 mm, 80 mm 2-1371225538 130,° angled blade plate, 9 hole, 152 mm, 50 mm 2-1371225539 130,° angled blade plate, 9 hole, 152 mm, 60 mm 2-1371225540 130,° angled blade plate, 9 hole, 152 mm, 70 mm 2-1371225541 130,° angled blade plate, 9 hole, 152 mm, 80 mm 2-13

71225600 90,° infant osteotomy, 3H, B:25 mm, D:7 mm 2-1271225601 90,° infant osteotomy, 3H, B:25 mm, D:12 mm 2-1271225602 90,° infant osteotomy, 3H, B:32 mm, D:7 mm 2-1271225603 90,° infant osteotomy, 3H, B:32 mm, D:12 mm 2-1271225610 115,° bifurcated infant, B:30 mm, D:5 mm 2-1271225611 115,° bifurcated infant, B:35 mm, D:5 mm 2-12

71225620 child osteotomy, 3H, A:80,° B:35 mm, D:8 mm 2-1271225621 child osteotomy, 3H, A:80,° B:45 mm, D:8 mm 2-1271225622 child osteotomy, 3H, A:90,° B:35 mm, D:8 mm 2-1271225623 child osteotomy, 3H, A:90,° B:45 mm, D:8 mm 2-1271225624 child osteotomy, 3H, A:100,° B:35 mm, D:8 mm 2-1271225625 child osteotomy, 3H, A:100,° B:45 mm, D:8 mm 2-12

71225640 90,° adolescent osteotomy, 3H, B:40 mm, D:10 mm 2-1471225641 90,° adolescent osteotomy, 3H, B:40 mm, D:15 mm 2-1471225642 90,° adolescent osteotomy, 3H, B:50 mm, D:10 mm 2-1471225643 90,° adolescent osteotomy, 3H, B:50 mm, D:15 mm 2-1471225644 90,° adolescent osteotomy, 3H, B:60 mm, D:15 mm 2-14

71225716 3.5 mm x 16 mm x 6 mm shaft screw, sterile 1-471225718 3.5 mm x 18 mm x 6 mm shaft screw, sterile 1-471225720 3.5 mm x 20 mm x 6 mm shaft screw, sterile 1-471225722 3.5 mm x 22 mm x 6 mm shaft screw, sterile 1-471225724 3.5 mm x 24 mm x 10 mm shaft screw, sterile 1-471225726 3.5 mm x 26 mm x 10 mm shaft screw, sterile 1-471225728 3.5 mm x 28 mm x 10 mm shaft screw, sterile 1-471225730 3.5 mm x 30 mm x 10 mm shaft screw, sterile 1-471225732 3.5 mm x 32 mm x 12 mm shaft screw, sterile 1-471225734 3.5 mm x 34 mm x 12 mm shaft screw, sterile 1-471225736 3.5 mm x 36 mm x 12 mm shaft screw, sterile 1-471225738 3.5 mm x 38 mm x 12 mm shaft screw, sterile 1-471225740 3.5 mm x 40 mm x 12 mm shaft screw, sterile 1-471225745 3.5 mm x 45 mm x 15 mm shaft screw, sterile 1-471225750 3.5 mm x 50 mm x 15 mm shaft screw, sterile 1-4

71225822 4.5 mm x 22 mm x 12 mm shaft screw, sterile 1-771225824 4.5 mm x 24 mm x 12 mm shaft screw, sterile 1-771225826 4.5 mm x 26 mm x 12 mm shaft screw, sterile 1-771225828 4.5 mm x 28 mm x 12 mm shaft screw, sterile 1-771225830 4.5 mm x 30 mm x 12 mm shaft screw, sterile 1-771225832 4.5 mm x 32 mm x 12 mm shaft screw, sterile 1-771225834 4.5 mm x 34 mm x 12 mm shaft screw, sterile 1-771225836 4.5 mm x 36 mm x 12 mm shaft screw, sterile 1-771225838 4.5 mm x 38 mm x 12 mm shaft screw, sterile 1-771225840 4.5 mm x 40 mm x 12 mm shaft screw, sterile 1-771225842 4.5 mm x 42 mm x 12 mm shaft screw, sterile 1-771225844 4.5 mm x 44 mm x 12 mm shaft screw, sterile 1-771225846 4.5 mm x 46 mm x 12 mm shaft screw, sterile 1-771225848 4.5 mm x 48 mm x 12 mm shaft screw, sterile 1-771225850 4.5 mm x 50 mm x 12 mm shaft screw, sterile 1-771225852 4.5 mm x 52 mm x 15 mm shaft screw, sterile 1-771225854 4.5 mm x 54 mm x 15 mm shaft screw, sterile 1-771225856 4.5 mm x 56 mm x 15 mm shaft screw, sterile 1-7


6-8

71225858 4.5 mm x 58 mm x 15 mm shaft screw, sterile 1-771225860 4.5 mm x 60 mm x 15 mm shaft screw, sterile 1-771225864 4.5 mm x 64 mm x 18 mm shaft screw, sterile 1-771225868 4.5 mm x 68 mm x 18 mm shaft screw, sterile 1-771225872 4.5 mm x 72 mm x 18 mm shaft screw, sterile 1-771225876 4.5 mm x 76 mm x 18 mm shaft screw, sterile 1-771225880 4.5 mm x 80 mm x 18 mm shaft screw, sterile 1-771225885 4.5 mm x 85 mm x 22 mm shaft screw, sterile 1-771225890 4.5 mm x 90 mm x 22 mm shaft screw, sterile 1-771225895 4.5 mm x 95 mm x 26 mm shaft screw, sterile 1-771225900 4.5 mm x 100 mm x 26 mm shaft screw, sterile 1-7

71226030 6.5 mm x 16 mm x 30 mm cancellous screw 1-871226035 6.5 mm x 16 mm x 35 mm cancellous screw 1-871226040 6.5 mm x 16 mm x 40 mm cancellous screw 1-871226045 6.5 mm x 16 mm x 45 mm cancellous screw 1-871226050 6.5 mm x 16 mm x 50 mm cancellous screw 1-871226055 6.5 mm x 16 mm x 55 mm cancellous screw 1-871226060 6.5 mm x 16 mm x 60 mm cancellous screw 1-871226065 6.5 mm x 16 mm x 65 mm cancellous screw 1-871226070 6.5 mm x 16 mm x 70 mm cancellous screw 1-871226075 6.5 mm x 16 mm x 75 mm cancellous screw 1-871226080 6.5 mm x 16 mm x 80 mm cancellous screw 1-871226085 6.5 mm x 16 mm x 85 mm cancellous screw 1-871226090 6.5 mm x 16 mm x 90 mm cancellous screw 1-871226095 6.5 mm x 16 mm x 95 mm cancellous screw 1-871226100 6.5 mm x 16 mm x 100 mm cancellous screw 1-871226105 6.5 mm x 16 mm x 105 mm cancellous screw 1-871226110 6.5 mm x 16 mm x 110 mm cancellous screw 1-871226115 6.5 mm x 16 mm x 115 mm cancellous screw 1-871226120 6.5 mm x 16 mm x 120 mm cancellous screw 1-871226125 6.5 mm x 16 mm x 125 mm cancellous screw 1-871226130 6.5 mm x 16 mm x 130 mm cancellous screw 1-871226135 6.5 mm x 16 mm x 135 mm cancellous screw 1-871226140 6.5 mm x 16 mm x 140 mm cancellous screw 1-871226145 6.5 mm x 16 mm x 145 mm cancellous screw 1-871226150 6.5 mm x 16 mm x 150 mm cancellous screw 1-8

71228045 6.5 mm x 32 mm x 45 mm cancellous screw 1-971228050 6.5 mm x 32 mm x 50 mm cancellous screw 1-971228055 6.5 mm x 32 mm x 55 mm cancellous screw 1-971228060 6.5 mm x 32 mm x 60 mm cancellous screw 1-971228065 6.5 mm x 32 mm x 65 mm cancellous screw 1-971228070 6.5 mm x 32 mm x 70 mm cancellous screw 1-971228075 6.5 mm x 32 mm x 75 mm cancellous screw 1-971228080 6.5 mm x 32 mm x 80 mm cancellous screw 1-971228085 6.5 mm x 32 mm x 85 mm cancellous screw 1-971228090 6.5 mm x 32 mm x 90 mm cancellous screw 1-971228095 6.5 mm x 32 mm x 95 mm cancellous screw 1-971228100 6.5 mm x 32 mm x 100 mm cancellous screw 1-971228105 6.5 mm x 32 mm x 105 mm cancellous screw 1-971228110 6.5 mm x 32 mm x 110 mm cancellous screw 1-971228115 6.5 mm x 32 mm x 115 mm cancellous screw 1-971228120 6.5 mm x 32 mm x 120 mm cancellous screw 1-971228125 6.5 mm x 32 mm x 125 mm cancellous screw 1-971228130 6.5 mm x 32 mm x 130 mm cancellous screw 1-971228135 6.5 mm x 32 mm x 135 mm cancellous screw 1-971228140 6.5 mm x 32 mm x 140 mm cancellous screw 1-971228145 6.5 mm x 32 mm x 145 mm cancellous screw 1-971228150 6.5 mm x 32 mm x 150 mm cancellous screw 1-9

71229025 6.5 mm x full thread x 25 mm cancellous screw 1-971229030 6.5 mm x full thread x 30 mm cancellous screw 1-971229035 6.5 mm x full thread x 35 mm cancellous screw 1-971229040 6.5 mm x full thread x 40 mm cancellous screw 1-971229045 6.5 mm x full thread x 45 mm cancellous screw 1-971229050 6.5 mm x full thread x 50 mm cancellous screw 1-971229055 6.5 mm x full thread x 55 mm cancellous screw 1-971229060 6.5 mm x full thread x 60 mm cancellous screw 1-971229065 6.5 mm x full thread x 65 mm cancellous screw 1-971229070 6.5 mm x full thread x 70 mm cancellous screw 1-971229075 6.5 mm x full thread x 75 mm cancellous screw 1-971229080 6.5 mm x full thread x 80 mm cancellous screw 1-971229085 6.5 mm x full thread x 85 mm cancellous screw 1-9

71229090 6.5 mm x full thread x 90 mm cancellous screw 1-971229095 6.5 mm x full thread x 95 mm cancellous screw 1-971229100 6.5 mm x full thread x 100 mm cancellous screw 1-971229105 6.5 mm x full thread x 105 mm cancellous screw 1-971229110 6.5 mm x full thread x 110 mm cancellous screw 1-971229115 6.5 mm x full thread x 115 mm cancellous screw 1-971229120 6.5 mm x full thread x 120 mm cancellous screw 1-971229125 6.5 mm x full thread x 125 mm cancellous screw 1-971229130 6.5 mm x full thread x 130 mm cancellous screw 1-971229135 6.5 mm x full thread x 135 mm cancellous screw 1-971229140 6.5 mm x full thread x 140 mm cancellous screw 1-971229145 6.5 mm x full thread x 145 mm cancellous screw 1-971229150 6.5 mm x full thread x 150 mm cancellous screw 1-9

71171000 mini instrumentation/implant set, hexagonal screws 4-471171003 mini instrumentation set 4-471165000 mini implant set, hexagonal screws 4-471165003 mini implant set, cruciate screws 4-471165001 mini cruciate screw set 4-471176001 mini self-tapping instrumentation/implant set, 4-4

hexagonal screws71166000 mini self-tapping implant set, hexagonal screws 4-471166004 mini self-tapping implant set, cruciate screws 4-471166002 mini self-tapping hexagonal screw set 4-471166006 mini self-tapping cruciate screw set 4-471172000 small instrumentation/implant set 4-471172003 small instrumentation set 4-471165002 small implant set 4-471176004 small self-tapping instrumentation/implant set 4-471176003 small self-tapping implant set 4-471173000 large instrumentation/implant set 4-471173007 large instrumentation set 4-471165004 large screw caddy set 4-471165006 large plate set 4-471176006 large self-tapping instrumentation/implant set 4-471176005 large self-tapping screw caddy set 4-471174000 pelvic instrumentation/implant set 4-471174006 pelvic instrumentation set 4-471165008 pelvic implant set 4-471174002 pelvic reduction instrumentation set 4-471176008 pelvic self-tapping instrumentation/implant set 4-471176007 pelvic self-tapping implant set 4-471176009 blade plate instrumentation set 4-4

71175526 radiographic templates, blade plates 5-271180472 screw guide, TC-100 wall chart na71180056 CD-ROM training software 5-271180057 bin labels, mini fragment 5-271180058 bin labels, small fragment 5-271180059 bin labels, large fragment 5-271180060 bin labels, pelvic fragment 5-271180061 bin labels, angled blade plates 5-271180275 technical summary brochure, 5-2

“measuring up to the standard”71180312 training book, 5-2

“a guide to fracture management”71180318 inventory control sheets, pelvic fragment 5-271180319 inventory control sheets, large fragment 5-271180320 inventory control sheets, small fragment 5-271180321 inventory control sheets, mini fragment 5-271180325 inventory control sheets, blade plates 5-271980425 autoclavable labels, mini trays 5-271980426 autoclavable labels, small trays 5-271980427 autoclavable labels, large trays 5-271980428 autoclavable labels, blade plate trays 5-271980429 autoclavable labels, pelvic trays 5-2


6-9

1/3 tubular plates with collar 2-51/4 tubular plates 2-3

adaptors quick connect for Jacobs chuck 3-5quick connect, mini PF na

adolescent osteotomy plates, 90° 2-14adult angled blade plates, 130° 2-16

condylar plates, 95° 2-15osteotomy plates 2-14

arthrodesis hip plates, see cobra head plates 2-10articulated tension device, with gauge 3-20asymmetric pelvic reduction forceps 3-13

autoclavable labels 5-2

ball spike, straight 3-18

bending irons 3-14, 3-15pliers, for mini plates 3-16pliers, for small fragment plates 3-16pliers, for reconstruction plates 3-16pliers, wire 3-17press, large 3-15templates 3-17(twisting) iron for 4.5 mm plates 3-15

bifurcated infant plate, inserter 3-22infant plates 2-12

basic instrument tray 4-2bin labels 5-2

blade plate instrument tray 4-3plate instrumentation set 4-4plates 2-12 to 2-15plates, chisel blades 3-25plates, inserter-extractor 3-22plates, radiographic templates 5-2plates, triangular positioning plates 3-23tray, sterilizing 4-3

blades chisel 3-25

blunt pelvic retractor 3-17

bone holding forceps 3-9hooks 3-18screws – see screws, cortex

broad compression plates, 4.5 mm 2-8buttress plates, condylar 2-10

plates, L 2-9plates, T 2-9

calcaneal plates 2-7Calhoun plate – see calcaneal plates 2-7

calibrated taps 3-2

cancellous screws, 4.0 mm 1-5screws, 6.5 mm fully threaded 1-9screws, 6.5 mm with 16 mm thread 1-8screws, 6.5 mm with 32 mm thread 1-9

cases sterilizing – see trays

CD-ROM training software 5-2cerclage wires 5-1

child osteotomy plates 2-12

chisel blades 3-25guide, with adjustable angle for blade plates 3-21handle 3-25seating for adolescent & child blade plates 3-22seating for infant blade plates 3-21seating for adult blade plates 3-21

chuck universal w/t-handle 3-19cloverleaf plates 2-6cobra head plates 2-10combination wrench 3-20

compression articulated tension device 3-20plates, 2.7 mm small 2-4plates, broad, 4.5 mm 2-8plates, narrow, 4.5 mm 2-8plates, small, 3.5 mm 2-5

condylar buttress plates 2-10plate guide 3-24plates, 1.5 mm 2-1plates, 2.0 mm 2-3plates, 2.7 mm 2-4plates, 95,° adult 2-15plates, 95,° small stature 2-13plates, blade 2-13, 2-15

cortex screws, 1.5 mm 1-1screws, 2.0 mm 1-2screws, 2.7 mm 1-3screws, 3.5 mm 1-4screws, 4.5 mm 1-6

cortical screws – see cortex

countersinks 3-2

cruciate screws, 1.5 mm 1-1screws, 1.5 mm, self-tapping 1-1screws, 2.0 mm 1-2screws, 2.0 mm, self-tapping 1-2

cruciform screws – see cruciatescrewdriver shaft 3-6

curved reconstruction plates, 3.5 mm 2-11cutters wire 3-14cutting forceps for mini plates 3-9

depth gauges 3-19disk spiked 3-18distal radius plates see T-plates 2-5double drill sleeves 3-3

drill bits, mini 3-1bits, non-quick coupling 3-1bits, quick coupling 3-1, 3-2bits, three-fluted 3-2

drill guides hip, neutral & load 3-24neutral & load 3-4, 3-24parallel, sleeve 3-4sleeve, inserts 3-4sleeves 3-3, 3-4sleeves, double 3-3triple 3-21universal 3-5

elevators periosteal 3-18extractor blade plates 3-22Farabeuf forceps 3-12

forceps Farabeuf 3-12mini screw 3-20

A L P H A B E T I C A L I N D E XKey Word Description Page No. Key Word Description Page No.

6-10

pelvic reduction, asymmetric 3-13plate cutting 3-9plate cutting, shear cut 3-9plate/bone holding 3-9plate/bone holding w/foot 3-9reduction for use w/screws 3-12reduction w/points 3-10reduction w/points & ratchet 3-11reduction w/serrated jaws 3-12reduction w/speed lock 3-12reduction, 3-pointed-ball tips 3-13reduction, angled point-ball tips 3-13reduction, pointed-ball tips 3-13screw anchored for pelvic 3-20self-centering 3-11stagbeetle 120 mm 3-10Verbrugge self-centering, size 0 3-11

fully-threaded screws, cancellous, 4.0 mm 1-5screws, cancellous, 6.5 mm 1-9

Galveston plate – see calcaneal plates 2-7gauges depth 3-19gold 2.5 mm drill bits 3-1

3.5 mm tap 3-2

guides chisel 3-21condylar plate 3-24drill, 4.5 mm, hip 3-24triple drill 3-21universal drill 3-5drill 3-3, 3-4, 3-5drill, neutral & load 3-4

hammers 500g 3-24slotted 3-23

handles chisel 3-25quick coupling, mini 3-6small quick coupling 3-6

hexagonal (hex) screwdriver shaft, large 3-8screwdriver shaft, quick coupling 3-6screwdriver shaft, small 3-7screwdriver shaft, small, long 3-6screwdriver, holding sleeves 3-8screwdriver, large 3-7screwdriver, large for pelvic 3-7screwdriver, small 3-7screws 1-1 to 1-6

hip arthrodesis plates, see cobra head plates 2-10Hohmann retractors 3-17

holding sleeves for screwdriver shafts 3-8

hook plate 2-10bone, large 3-18bone, Volkman 3-18sharp 3-19

H plate, 1.5 mm 2-1plate, 2.0 mm 2-3

impactor 3-22implant sets 4-4

tray, large 4-2tray, pelvic 4-3

infant osteotomy plates 2-12

insert drill sleeves 3-4inserter for bifurcated infant plate 3-22

inserter-extractor, for blade plates 3-22

instruments 3-1 to 3-25instrument tray, blade plates 4-3

tray, pelvic 4-2tray, pelvic reduction 4-3instrumentation sets 4-4

inventory control sheets 5-2irons bending 3-14, 3-15

bending, K-wires 3-15

Jacobs chuck, quick connect adaptor 3-5chuck, router 3-21

Kirschner wires 5-1K-wires 5-1

bending irons 3-15

L buttress plates, tibia 2-9plates, 2.0 mm 2-2plates, 2.7 mm 2-4plates, oblique, 2.7 mm 2-4plates, oblique, 2.0 mm 2-2

large bending press 3-15bone hook 3-18fragment tray – basic instruments 4-2hexagonal screwdriver 3-7holding sleeve for hexagonal screwdriver 3-8implant tray – plates 4-2instrument tray 4-2instrumentation/implant set 4-4plate set 4-4plates 2-8 to 2-10screw caddy (tray) 4-1screw caddy set 4-4screwdriver shaft 3-8screwdrivers 3-7screws, cancellous 1-8, 1-9screws, cortex 1-6screws, malleolar 1-7screws, shaft 1-7sets 4-4T-plates 2-9trays, sterilizing 4-1, 4-2

lateral tibial head buttress plates 2-9

malleolar screws 1-7

mini bending iron for plates 3-15compression plates – see 2.7 mm small 2-4countersink 3-2cruciate head screws 1-1, 1-2cruciform & hex holding sleeves 3-8cruciform screwdriver shaft 3-6double drill sleeve 3-3drill bits 3-1hex screwdriver shaft 3-6instrumentation/implant set 4-4plates 2-1 to 2-4quick coupling handle 3-6quick coupling handle, bulb 3-6screw forceps 3-20screws 1-1, 1-2, 1-3sets 4-4taps 3-2tray, sterilizing 4-1

multi fragment plate 2-3

narrow compression plates, 4.5 mm 2-8


6-11

neutral and load, 4.5 mm drill guides 3-4

nut for 4.5 mm cortex screws 5-1

oblique plates, L, 2.0 mm 2-2T plates, small 2-5

one-third tubular plates with collar 2-5osteotomy plates, adolescent 90° 2-14

plates, adult 2-14plates, child 2-12plates, infant 90° 2-12

parallel drill guide, sleeve, 2.0 mm 3-4partially-threaded screws, cancellous, 4.0 mm 1-5

screws, cancellous, 6.5 mm 1-8, 1-9

pelvic depth gauge, 120 mm 3-19forceps 3-11 to 3-13implant tray 4-3instrument tray 4-2instrumentation/implant set 4-4large hexagonal screwdriver 3-7reduction forceps, asymmetric 3-13reduction instrument tray 4-3retractor, blunt 3-17screws – see small and large screwssets 4-4spiked disk 3-18trays, sterilizing 4-2, 4-3

periosteal elevators 3-18

plate 1/3 tubular with collar 2-51.5 mm 2-12.0 mm 2-2, 2-32.7 mm 2-43.5 mm 2-54.5 mm 2-8adolescent osteotomy, 90° 2-14adult condylar 2-15adult osteotomy 2-14blade 2-12 to 2-16blade adult angled 130° 2-16bone holding forceps 3-9bone holding forceps w/foot 3-9broad compression, 4.5 mm 2-8calcaneal 2-7Calhoun, see calcaneal 2-7cloverleaf 2-6cobra head 2-10compression, broad 2-8compression, large, 4.5 mm 2-8compression, mini, 2.7 mm 2-4compression, narrow 2-8compression, small, 3.5 mm 2-5condylar buttress 2-10condylar, 1.5 mm 2-1condylar, 2.0 mm 2-3condylar, 2.7 mm 2-4condylar, 95,° adult 2-15condylar, 95,° small stature 2-13condylar, 95,° adult 2-15condylar, 95,° small stature 2-13cutting forceps 3-9cutting forceps 3-9foot and ankle – see calcaneal 2-7Galveston, see calcaneal plates 2-7guide, condylar 3-24H, 1.5 mm 2-1H, 2.0 mm 2-3holding forceps 3-9

hook 2-10infant osteotomy 2-12L, 2.0 mm 2-2L, 2.7 mm 2-4L, oblique, 2.0 mm 2-2L, oblique, 2.7 mm 2-4L-buttress 2-9large 2-8 to 2-10lateral tibial head buttress 2-9mini 2-1 to 2-4multi-fragment 2-3narrow compression, 4.5 mm 2-8oblique L, 2.7 mm 2-4one-third tubular 2-5osteotomy, adolescent 90° 2-14osteotomy, adult 2-14osteotomy, child 2-12osteotomy, infant 90° 2-12pelvic 2-11quarter-tubular 2-3reconstruction 2-11semi-tubular 2-8small 2-5, 2-6small compression 2-4, 2-5specialty, large 2-10spoon 2-10straight, large 2-8straight, mini 2-1, 2-2T-plates – see T-platesY-plates – see calcaneal plates 2-7

pliers bending 3-16wire bending 3-17

pointed-ball reduction forceps 3-13

positioning plate, quadrangular 3-24plates, triangular 3-23

quadrangular positioning plate 3-24

quarter-tubular plates 2-3

quick connect adaptor for Jacobs chuck 3-5adaptor, mini PF nathree-fluted drill bits 3-2

quick coupling drill bits 3-1, 3-2handles 3-6router 3-21

radiographic template, blade plates 5-2

reconstruction plates 2-11bending templates 3-17

reduction forceps angled point-ball tips 3-13pelvic asymmetric 3-13pelvic for use with screws 3-12pointed-ball tips 3-13points & ratchet 3-11points, broad 3-10points, narrow 3-10points, ratchet 3-10ratchet 3-11serrated jaws 3-12speed lock 3-123-pointed, ball tips 3-13

reduction instrumentation set, pelvic 4-4

retractors Hohmann 3-17


6-12

pelvic, blunt 3-17

right angle small T-plates 2-5

routers 3-21

Schanz screw, 6.0 mm 5-1

screw 1.5 mm, cruciate socket 1-11.5 mm, hexagonal socket 1-12.0 mm, cruciate socket 1-22.0 mm, hexagonal socket 1-22.7 mm, hexagonal socket 1-33.5 mm 1-44.0 mm 1-54.5 mm 1-6, 1-76.5 mm 1-8, 1-9caddy for 4.5 mm/6.5 mm screws 4-1caddy set, large 4-4cancellous, 4.0 mm 1-5cancellous, 6.5 mm, fully threaded 1-9cancellous, 6.5 mm, 16 mm thread 1-8cancellous, 6.5 mm, 32 mm thread 1-9cortex, 1.5 mm 1-1cortex, 2.0 mm 1-2cortex, 2.7 mm 1-3cortex, 3.5 mm 1-4cortex, 4.5 mm 1-6cortical – see screws, cortexforceps 3-20guide, TC-100 wall chart 6-1holding sleeves 3-8large 1-6 to 1-9malleolar, 4.5 mm 1-7mini 1-1, 1-2, 1-3pelvic, 3.5 mm 1-4pelvic, 4.5 mm 1-6Schanz 5-1self-tapping – see screws, cortexshaft, 3.5 mm 1-4shaft, 4.5 mm 1-7small 1-4, 1-5

screwdriver handles, quick coupling 3-6holding sleeves 3-8large 3-7mini 3-6pelvic, large 3-7pelvic, small long 3-7shaft, large 3-8shaft, mini 3-6shaft, mini cruciform 3-6shaft, small hexagonal 3-7shaft, small, long 3-6small 3-7

seating chisels adolescent & child 3-22adult 3-21infant 3-21

self-centering forceps 3-11self-holding sleeves 3-8self-tapping screws – see screws, cortex 1-1

semi-tubular plates 2-8

sets 4-4

shaft screws, 3.5 mm 1-4screws, 4.5 mm 1-7screwdriver, large 3-8screwdriver, small 3-7

sharp hook 3-19

sleeve drill, 2.5 mm/3.5 mm double 3-3drill, double, 4.5 mm/3.2 mm 3-3drill, double, 6.5 mm/3.2 mm 3-3holding, for small hexagonal screwdriver 3-8holding, for large hexagonal screwdriver 3-8parallel drill guide, 2.0 mm 3-4

slotted hammer 3-23

small compression plates, 2.7 mm 2-4compression plates, 3.5 mm 2-5instrumentation/implant set 4-4plates 2-5, 2-6quick coupling handle 3-6quick coupling t-handle 3-5screwdriver 3-7screwdriver handle 3-6screwdriver shaft 3-7screwdriver shaft, long 3-6screwdriver, holding sleeve 3-8screws 1-4, 1-5sets 4-4stature condylar, 95° plates 2-13T-handle, quick coupling 3-5T-plate, oblique 2-5T-plate, right angle 2-5tray, sterilizing 4-1

socket wrench, with universal joint 3-20speed lock, reduction forceps 3-12

lock, self-centering forceps 3-11

spike ball, straight 3-18spiked disk 3-18split holding sleeves 3-8spoon plates 2-10

stagbeetle forceps 3-10

sterilizing trays blade plate instruments 4-3large implants 4-2large instruments 4-2large screws 4-1mini 4-1pelvic implants 4-3pelvic instruments 4-2pelvic reduction instruments 4-3small 4-1

storage bin labels 5-2

straight ball spike 3-18plates, 1.5 mm 2-1plates, 2.0 mm 2-2plates, 2.7 mm 2-4plates, 3.5 mm 2-5plates, large 2-8

T-plates 1.5 mm 2-12.0 mm 2-22.7 mm 2-4buttress 2-9large 2-9small 2-5

T-buttress plates 2-9

T-handle small quick coupling 3-5universal chuck 3-19

taps 3-2


6-13

technical summary brochure “Measuring Up to the Standard” 5-2

templates bending 3-17radiographic, for blade plates 5-2

tension device articulated with gauge 3-20

three-fluted drill bits 3-2

tibial head buttress plates, lateral 2-9see T-plates, large

trays blade plate instruments 4-3large implants 4-2large instrument 4-2large screws 4-1mini 4-1pelvic implants 4-3pelvic instruments 4-2pelvic reduction instruments 4-3small 4-1

triangular positioning plates 3-23triple drill guide 3-21tubular 1/3, plates 2-5twisting iron for 4.5 mm plates 3-15

universal chuck, with t-handle 3-19drill guides 3-5

Verbrugge forceps 3-11Volkman bone hook 3-18

wall chart screw guide na

washers 5-1

wire bending pliers 3-17cutters 3-14cerclage 5-1Kirschner 5-1

wrench combination 3-20for nut (71143045) 5-1socket, with universal joint 3-20

Y-plates see calcaneal plates 2-7

A L P H A B E T I C A L I N D E XKey Word Description Page No.

6-14

200.006 71161606 1.5 mm x 6 mm cortex screw, cruciate socket 1-1200.007 71161607 1.5 mm x 7 mm cortex screw, cruciate socket 1-1200.008 71161608 1.5 mm x 8 mm cortex screw, cruciate socket 1-1200.009 71161609 1.5 mm x 9 mm cortex screw, cruciate socket 1-1200.010 71161610 1.5 mm x 10 mm cortex screw, cruciate socket 1-1200.011 71161611 1.5 mm x 11 mm cortex screw, cruciate socket 1-1200.012 71161612 1.5 mm x 12 mm cortex screw, cruciate socket 1-1200.014 71161614 1.5 mm x 14 mm cortex screw, cruciate socket 1-1200.016 71161616 1.5 mm x 16 mm cortex screw, cruciate socket 1-1200.018 71161618 1.5 mm x 18 mm cortex screw, cruciate socket 1-1200.020 71161620 1.5 mm x 20 mm cortex screw, cruciate socket 1-1

200.806 71149006 1.5 mm x 6 mm self-tapping screw, cruciate socket 1-1200.807 71149007 1.5 mm x 7 mm self-tapping screw, cruciate socket 1-1200.808 71149008 1.5 mm x 8 mm self-tapping screw, cruciate socket 1-1200.809 71149009 1.5 mm x 9 mm self-tapping screw, cruciate socket 1-1200.810 71149010 1.5 mm x 10 mm self-tapping screw, cruciate socket 1-1200.811 71149011 1.5 mm x 11 mm self-tapping screw, cruciate socket 1-1200.812 71149012 1.5 mm x 12 mm self-tapping screw, cruciate socket 1-1200.814 71149014 1.5 mm x 14 mm self-tapping screw, cruciate socket 1-1200.816 71149016 1.5 mm x 16 mm self-tapping screw, cruciate socket 1-1200.818 71149018 1.5 mm x 18 mm self-tapping screw, cruciate socket 1-1200.820 71149020 1.5 mm x 20 mm self-tapping screw, cruciate socket 1-1200.822 71149022 1.5 mm x 22 mm self-tapping screw, cruciate socket 1-1200.824 71149024 1.5 mm x 24 mm self-tapping screw, cruciate socket 1-1

201.006 71162106 2.0 mm x 6 mm cortex screw, cruciate socket 1-2201.008 71162108 2.0 mm x 8 mm cortex screw, cruciate socket 1-2201.010 71162110 2.0 mm x 10 mm cortex screw, cruciate socket 1-2201.012 71162112 2.0 mm x 12 mm cortex screw, cruciate socket 1-2201.014 71162114 2.0 mm x 14 mm cortex screw, cruciate socket 1-2201.016 71162116 2.0 mm x 16 mm cortex screw, cruciate socket 1-2201.018 71162118 2.0 mm x 18 mm cortex screw, cruciate socket 1-2201.020 71162120 2.0 mm x 20 mm cortex screw, cruciate socket 1-2201.022 71162122 2.0 mm x 22 mm cortex screw, cruciate socket 1-2201.024 71162124 2.0 mm x 24 mm cortex screw, cruciate socket 1-2201.026 71162126 2.0 mm x 26 mm cortex screw, cruciate socket 1-2201.028 71162128 2.0 mm x 28 mm cortex screw, cruciate socket 1-2201.030 71162130 2.0 mm x 30 mm cortex screw, cruciate socket 1-2201.032 71162132 2.0 mm x 32 mm cortex screw, cruciate socket 1-2201.034 71162134 2.0 mm x 34 mm cortex screw, cruciate socket, 1-2

sterile201.036 71162136 2.0 mm x 36 mm cortex screw, cruciate socket, 1-2

sterile201.038 71162138 2.0 mm x 38 mm cortex screw, cruciate socket, 1-2

sterile

201.806 71149206 2.0 mm x 6 mm self-tapping screw, cruciate socket 1-2201.808 71149208 2.0 mm x 8 mm self-tapping screw, cruciate socket 1-2201.810 71149210 2.0 mm x 10 mm self-tapping screw, cruciate socket 1-2201.812 71149212 2.0 mm x 12 mm self-tapping screw, cruciate socket 1-2201.814 71149214 2.0 mm x 14 mm self-tapping screw, cruciate socket 1-2201.816 71149216 2.0 mm x 16 mm self-tapping screw, cruciate socket 1-2201.818 71149218 2.0 mm x 18 mm self-tapping screw, cruciate socket 1-2201.820 71149220 2.0 mm x 20 mm self-tapping screw, cruciate socket 1-2201.822 71149222 2.0 mm x 22 mm self-tapping screw, cruciate socket 1-2201.824 71149224 2.0 mm x 24 mm self-tapping screw, cruciate socket 1-2201.826 71149226 2.0 mm x 26 mm self-tapping screw, cruciate socket 1-2201.828 71149228 2.0 mm x 28 mm self-tapping screw, cruciate socket 1-2201.830 71149230 2.0 mm x 30 mm self-tapping screw, cruciate socket 1-2201.832 71149232 2.0 mm x 32 mm self-tapping screw, cruciate socket 1-2201.834 71149234 2.0 mm x 34 mm self-tapping screw, cruciate socket 1-2201.836 71149236 2.0 mm x 36 mm self-tapping screw, cruciate socket 1-2201.838 71149238 2.0 mm x 38 mm self-tapping screw, cruciate socket 1-2

202.006 71220006 2.7 mm x 6 mm cortex screw 1-3202.008 71220008 2.7 mm x 8 mm cortex screw 1-3202.010 71220010 2.7 mm x 10 mm cortex screw 1-3202.012 71220012 2.7 mm x 12 mm cortex screw 1-3202.014 71220014 2.7 mm x 14 mm cortex screw 1-3202.016 71220016 2.7 mm x 16 mm cortex screw 1-3202.018 71220018 2.7 mm x 18 mm cortex screw 1-3202.020 71220020 2.7 mm x 20 mm cortex screw 1-3202.022 71220022 2.7 mm x 22 mm cortex screw 1-3

202.024 71220024 2.7 mm x 24 mm cortex screw 1-3202.026 71220026 2.7 mm x 26 mm cortex screw 1-3202.028 71220028 2.7 mm x 28 mm cortex screw 1-3202.030 71220030 2.7 mm x 30 mm cortex screw 1-3202.032 71220032 2.7 mm x 32 mm cortex screw 1-3202.034 71220034 2.7 mm x 34 mm cortex screw 1-3202.036 71220036 2.7 mm x 36 mm cortex screw 1-3202.038 71220038 2.7 mm x 38 mm cortex screw 1-3202.040 71220040 2.7 mm x 40 mm cortex screw 1-3202.045 71220045 2.7 mm x 45 mm cortex screw, sterile 1-3202.050 71220050 2.7 mm x 50 mm cortex screw, sterile 1-3202.055 71220055 2.7 mm x 55 mm cortex screw, sterile 1-3

202.806 71149406 2.7 mm x 6 mm self-tapping screw, hex socket 1-3202.808 71149408 2.7 mm x 8 mm self-tapping screw, hex socket 1-3202.810 71149410 2.7 mm x 10 mm self-tapping screw, hex socket 1-3202.812 71149412 2.7 mm x 12 mm self-tapping screw, hex socket 1-3202.814 71149414 2.7 mm x 14 mm self-tapping screw, hex socket 1-3202.816 71149416 2.7 mm x 16 mm self-tapping screw, hex socket 1-3202.818 71149418 2.7 mm x 18 mm self-tapping screw, hex socket 1-3202.820 71149420 2.7 mm x 20 mm self-tapping screw, hex socket 1-3202.822 71149422 2.7 mm x 22 mm self-tapping screw, hex socket 1-3202.824 71149424 2.7 mm x 24 mm self-tapping screw, hex socket 1-3202.826 71149426 2.7 mm x 26 mm self-tapping screw, hex socket 1-3202.828 71149428 2.7 mm x 28 mm self-tapping screw, hex socket 1-3202.830 71149430 2.7 mm x 30 mm self-tapping screw, hex socket 1-3202.832 71149432 2.7 mm x 32 mm self-tapping screw, hex socket 1-3202.834 71149434 2.7 mm x 34 mm self-tapping screw, hex socket 1-3202.836 71149436 2.7 mm x 36 mm self-tapping screw, hex socket 1-3202.838 71149438 2.7 mm x 38 mm self-tapping screw, hex socket 1-3202.840 71149440 2.7 mm x 40 mm self-tapping screw, hex socket 1-3202.845 71149445 2.7 mm x 45 mm self-tapping screw, hex socket 1-3202.850 71149450 2.7 mm x 50 mm self-tapping screw, hex socket 1-3202.855 71149455 2.7 mm x 55 mm self-tapping screw, hex socket 1-3

204.010 71222010 3.5 mm x 10 mm cortex screw 1-4204.012 71222012 3.5 mm x 12 mm cortex screw 1-4204.014 71222014 3.5 mm x 14 mm cortex screw 1-4204.016 71222016 3.5 mm x 16 mm cortex screw 1-4204.018 71222018 3.5 mm x 18 mm cortex screw 1-4204.020 71222020 3.5 mm x 20 mm cortex screw 1-4204.022 71222022 3.5 mm x 22 mm cortex screw 1-4204.024 71222024 3.5 mm x 24 mm cortex screw 1-4204.026 71222026 3.5 mm x 26 mm cortex screw 1-4204.028 71222028 3.5 mm x 28 mm cortex screw 1-4204.030 71222030 3.5 mm x 30 mm cortex screw 1-4204.032 71222032 3.5 mm x 32 mm cortex screw 1-4204.034 71222034 3.5 mm x 34 mm cortex screw 1-4204.036 71222036 3.5 mm x 36 mm cortex screw 1-4204.038 71222038 3.5 mm x 38 mm cortex screw 1-4204.040 71222040 3.5 mm x 40 mm cortex screw 1-4204.045 71222045 3.5 mm x 45 mm cortex screw 1-4204.050 71222050 3.5 mm x 50 mm cortex screw 1-4204.055 71222055 3.5 mm x 55 mm cortex screw 1-4204.060 71222060 3.5 mm x 60 mm cortex screw 1-4204.065 71222065 3.5 mm x 65 mm cortex screw 1-4204.070 71222070 3.5 mm x 70 mm cortex screw 1-4204.075 71222075 3.5 mm x 75 mm cortex screw 1-4204.080 71222080 3.5 mm x 80 mm cortex screw 1-4204.085 71222085 3.5 mm x 85 mm cortex screw 1-4204.090 71222090 3.5 mm x 90 mm cortex screw 1-4204.095 71222095 3.5 mm x 95 mm cortex screw 1-4204.100 71222100 3.5 mm x 100 mm cortex screw 1-4204.105 71222105 3.5 mm x 105 mm cortex screw 1-4204.110 71222110 3.5 mm x 110 mm cortex screw 1-4204.115 71222115 3.5 mm x 115 mm cortex screw 1-4204.120 71222120 3.5 mm x 120 mm cortex screw 1-4na 71222125 3.5 mm x 125 mm cortex screw, sterile 1-4na 71222130 3.5 mm x 130 mm cortex screw, sterile 1-4

204.216 71225716 3.5 mm x 16 mm x 6 mm shaft screw, sterile 1-4204.218 71225718 3.5 mm x 18 mm x 6 mm shaft screw, sterile 1-4204.220 71225720 3.5 mm x 20 mm x 6 mm shaft screw, sterile 1-4204.222 71225722 3.5 mm x 22 mm x 6 mm shaft screw, sterile 1-4

C R O S S R E F E R E N C E I N D E XEquivalent No. Catalog No. Description Page No. Equivalent No. Catalog No. Description Page No.

6-15

204.224 71225724 3.5 mm x 24 mm x 10 mm shaft screw, sterile 1-4204.226 71225726 3.5 mm x 26 mm x 10 mm shaft screw, sterile 1-4204.228 71225728 3.5 mm x 28 mm x 10 mm shaft screw, sterile 1-4204.230 71225730 3.5 mm x 30 mm x 10 mm shaft screw, sterile 1-4204.232 71225732 3.5 mm x 32 mm x 12 mm shaft screw, sterile 1-4204.234 71225734 3.5 mm x 34 mm x 12 mm shaft screw, sterile 1-4204.236 71225736 3.5 mm x 36 mm x 12 mm shaft screw, sterile 1-4204.238 71225738 3.5 mm x 38 mm x 12 mm shaft screw, sterile 1-4204.240 71225740 3.5 mm x 40 mm x 12 mm shaft screw, sterile 1-4204.245 71225745 3.5 mm x 45 mm x 15 mm shaft screw, sterile 1-4204.250 71225750 3.5 mm x 50 mm x 15 mm shaft screw, sterile 1-4

204.655 71149555 3.5 mm x 55 mm self-tapping pelvic cortex screw 1-4204.660 71149560 3.5 mm x 60 mm self-tapping pelvic cortex screw 1-4204.665 71149565 3.5 mm x 65 mm self-tapping pelvic cortex screw 1-4204.670 71149570 3.5 mm x 70 mm self-tapping pelvic cortex screw 1-4204.675 71149575 3.5 mm x 75 mm self-tapping pelvic cortex screw 1-4204.680 71149580 3.5 mm x 80 mm self-tapping pelvic cortex screw 1-4204.685 71149585 3.5 mm x 85 mm self-tapping pelvic cortex screw 1-4204.690 71149590 3.5 mm x 90 mm self-tapping pelvic cortex screw 1-4204.695 71149595 3.5 mm x 95 mm self-tapping pelvic cortex screw 1-4204.700 71149600 3.5 mm x 100 mm self-tapping pelvic cortex screw 1-4204.705 71149605 3.5 mm x 105 mm self-tapping pelvic cortex screw 1-4204.710 71149610 3.5 mm x 110 mm self-tapping pelvic cortex screw 1-4204.715 71149615 3.5 mm x 115 mm self-tapping pelvic cortex screw, 1-4

sterile204.720 71149620 3.5 mm x 120 mm self-tapping pelvic cortex screw, 1-4



sterile

204.810 71149510 3.5 mm x 10 mm self-tapping screw, hex socket 1-4204.812 71149512 3.5 mm x 12 mm self-tapping screw, hex socket 1-4204.814 71149514 3.5 mm x 14 mm self-tapping screw, hex socket 1-4204.816 71149516 3.5 mm x 16 mm self-tapping screw, hex socket 1-4204.818 71149518 3.5 mm x 18 mm self-tapping screw, hex socket 1-4204.820 71149520 3.5 mm x 20 mm self-tapping screw, hex socket 1-4204.822 71149522 3.5 mm x 22 mm self-tapping screw, hex socket 1-4204.824 71149524 3.5 mm x 24 mm self-tapping screw, hex socket 1-4204.826 71149526 3.5 mm x 26 mm self-tapping screw, hex socket 1-4204.828 71149528 3.5 mm x 28 mm self-tapping screw, hex socket 1-4204.830 71149530 3.5 mm x 30 mm self-tapping screw, hex socket 1-4204.832 71149532 3.5 mm x 32 mm self-tapping screw, hex socket 1-4204.834 71149534 3.5 mm x 34 mm self-tapping screw, hex socket 1-4204.836 71149536 3.5 mm x 36 mm self-tapping screw, hex socket 1-4204.838 71149538 3.5 mm x 38 mm self-tapping screw, hex socket 1-4204.840 71149540 3.5 mm x 40 mm self-tapping screw, hex socket 1-4204.845 71149545 3.5 mm x 45 mm self-tapping screw, hex socket 1-4204.850 71149550 3.5 mm x 50 mm self-tapping screw, hex socket 1-4204.855 71149555 3.5 mm x 55 mm self-tapping screw, hex socket 1-4204.860 71149560 3.5 mm x 60 mm self-tapping screw, hex socket 1-4204.865 71149565 3.5 mm x 65 mm self-tapping screw, hex socket 1-4204.870 71149570 3.5 mm x 70 mm self-tapping screw, hex socket 1-4204.875 71149575 3.5 mm x 75 mm self-tapping screw, hex socket 1-4204.880 71149580 3.5 mm x 80 mm self-tapping screw, hex socket 1-4204.885 71149585 3.5 mm x 85 mm self-tapping screw, hex socket 1-4204.890 71149590 3.5 mm x 90 mm self-tapping screw, hex socket 1-4204.895 71149595 3.5 mm x 95 mm self-tapping screw, hex socket 1-4204.900 71149600 3.5 mm x 100 mm self-tapping screw, hex socket 1-4204.905 71149605 3.5 mm x 105 mm self-tapping screw, hex socket 1-4204.910 71149610 3.5 mm x 110 mm self-tapping screw, hex socket 1-4204.715 71149615 3.5 mm x 115 mm self-tapping screw, hex socket, 1-4

sterile204.720 71149620 3.5 mm x 120 mm self-tapping screw, hex socket, 1-4



sterile

206.010 71223010 4.0 mm x 10 mm full thread cancellous screw 1-5206.012 71223012 4.0 mm x 12 mm full thread cancellous screw 1-5

206.014 71223014 4.0 mm x 14 mm full thread cancellous screw 1-5206.016 71223016 4.0 mm x 16 mm full thread cancellous screw 1-5206.018 71223018 4.0 mm x 18 mm full thread cancellous screw 1-5206.020 71223020 4.0 mm x 20 mm full thread cancellous screw 1-5206.022 71223022 4.0 mm x 22 mm full thread cancellous screw 1-5206.024 71223024 4.0 mm x 24 mm full thread cancellous screw 1-5206.026 71223026 4.0 mm x 26 mm full thread cancellous screw 1-5206.028 71223028 4.0 mm x 28 mm full thread cancellous screw 1-5206.030 71223030 4.0 mm x 30 mm full thread cancellous screw 1-5206.032 71223032 4.0 mm x 32 mm full thread cancellous screw 1-5206.035 71223035 4.0 mm x 35 mm full thread cancellous screw 1-5206.036 71223036 4.0 mm x 36 mm full thread cancellous screw 1-5206.040 71223040 4.0 mm x 40 mm full thread cancellous screw 1-5206.045 71223045 4.0 mm x 45 mm full thread cancellous screw 1-5206.050 71223050 4.0 mm x 50 mm full thread cancellous screw 1-5206.055 71223055 4.0 mm x 55 mm full thread cancellous screw 1-5206.060 71223060 4.0 mm x 60 mm full thread cancellous screw 1-5206.065 71223065 4.0 mm x 65 mm full thread cancellous screw 1-5206.070 71223070 4.0 mm x 70 mm full thread cancellous screw 1-5206.075 71223075 4.0 mm x 75 mm full thread cancellous screw 1-5206.080 71223080 4.0 mm x 80 mm full thread cancellous screw 1-5206.085 71223085 4.0 mm x 85 mm full thread cancellous screw 1-5206.090 71223090 4.0 mm x 90 mm full thread cancellous screw 1-5206.095 71223095 4.0 mm x 95 mm full thread cancellous screw 1-5206.100 71223100 4.0 mm x 100 mm full thread cancellous screw 1-5

207.010 71223210 4.0 mm x 10 mm partially threaded cancellous screw 1-5207.012 71223212 4.0 mm x 12 mm partially threaded cancellous screw 1-5207.014 71223214 4.0 mm x 14 mm partially threaded cancellous screw 1-5207.016 71223216 4.0 mm x 16 mm partially threaded cancellous screw 1-5207.018 71223218 4.0 mm x 18 mm partially threaded cancellous screw 1-5207.020 71223220 4.0 mm x 20 mm partially threaded cancellous screw 1-5207.022 71223222 4.0 mm x 22 mm partially threaded cancellous screw 1-5207.024 71223224 4.0 mm x 24 mm partially threaded cancellous screw 1-5207.026 71223226 4.0 mm x 26 mm partially threaded cancellous screw 1-5207.028 71223228 4.0 mm x 28 mm partially threaded cancellous screw 1-5207.030 71223230 4.0 mm x 30 mm partially threaded cancellous screw 1-5207.035 71223235 4.0 mm x 35 mm partially threaded cancellous screw 1-5207.040 71223240 4.0 mm x 40 mm partially threaded cancellous screw 1-5207.045 71223245 4.0 mm x 45 mm partially threaded cancellous screw 1-5207.050 71223250 4.0 mm x 50 mm partially threaded cancellous screw 1-5207.055 71223255 4.0 mm x 55 mm partially threaded cancellous screw 1-5207.060 71223260 4.0 mm x 60 mm partially threaded cancellous screw 1-5207.065 71223265 4.0 mm x 65 mm partially threaded cancellous screw 1-5207.070 71223270 4.0 mm x 70 mm partially threaded cancellous screw 1-5207.075 71223275 4.0 mm x 75 mm partially threaded cancellous screw 1-5207.080 71223280 4.0 mm x 80 mm partially threaded cancellous screw 1-5207.085 71223285 4.0 mm x 85 mm partially threaded cancellous screw 1-5207.090 71223290 4.0 mm x 90 mm partially threaded cancellous screw 1-5207.095 71223295 4.0 mm x 95 mm partially threaded cancellous screw 1-5207.100 71223300 4.0 mm x 100 mm partially threaded cancellous screw 1-5

210.806 71149106 1.5 mm x 6 mm self-tapping screw, hex socket 1-1210.807 71149107 1.5 mm x 7 mm self-tapping screw, hex socket 1-1210.808 71149108 1.5 mm x 8 mm self-tapping screw, hex socket 1-1210.809 71149109 1.5 mm x 9 mm self-tapping screw, hex socket 1-1210.810 71149110 1.5 mm x 10 mm self-tapping screw, hex socket 1-1210.811 71149111 1.5 mm x 11 mm self-tapping screw, hex socket 1-1210.812 71149112 1.5 mm x 12 mm self-tapping screw, hex socket 1-1210.814 71149114 1.5 mm x 14 mm self-tapping screw, hex socket 1-1210.816 71149116 1.5 mm x 16 mm self-tapping screw, hex socket 1-1210.818 71149118 1.5 mm x 18 mm self-tapping screw, hex socket 1-1210.820 71149120 1.5 mm x 20 mm self-tapping screw, hex socket 1-1210.822 71149122 1.5 mm x 22 mm self-tapping screw, hex socket 1-1210.824 71149124 1.5 mm x 24 mm self-tapping screw, hex socket 1-1

210.006 71161506 1.5 mm x 6 mm cortex screw, hex socket 1-1210.007 71161507 1.5 mm x 7 mm cortex screw, hex socket 1-1210.008 71161508 1.5 mm x 8 mm cortex screw, hex socket 1-1210.009 71161509 1.5 mm x 9 mm cortex screw, hex socket 1-1210.010 71161510 1.5 mm x 10 mm cortex screw, hex socket 1-1210.011 71161511 1.5 mm x 11 mm cortex screw, hex socket 1-1210.012 71161512 1.5 mm x 12 mm cortex screw, hex socket 1-1210.014 71161514 1.5 mm x 14 mm cortex screw, hex socket 1-1


6-16

210.016 71161516 1.5 mm x 16 mm cortex screw, hex socket 1-1210.018 71161518 1.5 mm x 18 mm cortex screw, hex socket 1-1210.020 71161520 1.5 mm x 20 mm cortex screw, hex socket 1-1

211.806 71149306 2.0 mm x 6 mm self-tapping screw, hex socket 1-2211.808 71149308 2.0 mm x 8 mm self-tapping screw, hex socket 1-2211.810 71149310 2.0 mm x 10 mm self-tapping screw, hex socket 1-2211.812 71149312 2.0 mm x 12 mm self-tapping screw, hex socket 1-2211.814 71149314 2.0 mm x 14 mm self-tapping screw, hex socket 1-2211.816 71149316 2.0 mm x 16 mm self-tapping screw, hex socket 1-2211.818 71149318 2.0 mm x 18 mm self-tapping screw, hex socket 1-2211.820 71149320 2.0 mm x 20 mm self-tapping screw, hex socket 1-2211.822 71149322 2.0 mm x 22 mm self-tapping screw, hex socket 1-2211.824 71149324 2.0 mm x 24 mm self-tapping screw, hex socket 1-2211.826 71149326 2.0 mm x 26 mm self-tapping screw, hex socket 1-2211.828 71149328 2.0 mm x 28 mm self-tapping screw, hex socket 1-2211.830 71149330 2.0 mm x 30 mm self-tapping screw, hex socket 1-2211.832 71149332 2.0 mm x 32 mm self-tapping screw, hex socket 1-2211.834 71149334 2.0 mm x 34 mm self-tapping screw, hex socket 1-2211.836 71149336 2.0 mm x 36 mm self-tapping screw, hex socket 1-2211.838 71149338 2.0 mm x 38 mm self-tapping screw, hex socket 1-2

211.006 71162206 2.0 mm x 6 mm cortex screw, hex socket 1-2211.008 71162008 2.0 mm x 8 mm cortex screw, hex socket 1-2211.010 71162010 2.0 mm x 10 mm cortex screw, hex socket 1-2211.012 71162012 2.0 mm x 12 mm cortex screw, hex socket 1-2211.014 71162014 2.0 mm x 14 mm cortex screw, hex socket 1-2211.016 71162016 2.0 mm x 16 mm cortex screw, hex socket 1-2211.018 71162018 2.0 mm x 18 mm cortex screw, hex socket 1-2211.020 71162020 2.0 mm x 20 mm cortex screw, hex socket 1-2211.022 71162022 2.0 mm x 22 mm cortex screw, hex socket 1-2211.024 71162024 2.0 mm x 24 mm cortex screw, hex socket 1-2211.026 71162026 2.0 mm x 26 mm cortex screw, hex socket 1-2211.028 71162028 2.0 mm x 28 mm cortex screw, hex socket 1-2211.030 71162030 2.0 mm x 30 mm cortex screw, hex socket 1-2211.032 71162032 2.0 mm x 32 mm cortex screw, hex socket 1-2211.034 71162034 2.0 mm x 34 mm cortex screw, hex socket, sterile 1-2211.036 71162036 2.0 mm x 36 mm cortex screw, hex socket, sterile 1-2211.038 71162038 2.0 mm x 38 mm cortex screw, hex socket, sterile 1-2

214.014 71225014 4.5 mm x 14 mm cortex screw 1-6214.016 71225016 4.5 mm x 16 mm cortex screw 1-6214.018 71225018 4.5 mm x 18 mm cortex screw 1-6214.020 71225020 4.5 mm x 20 mm cortex screw 1-6214.022 71225022 4.5 mm x 22 mm cortex screw 1-6214.024 71225024 4.5 mm x 24 mm cortex screw 1-6214.026 71225026 4.5 mm x 26 mm cortex screw 1-6214.028 71225028 4.5 mm x 28 mm cortex screw 1-6214.030 71225030 4.5 mm x 30 mm cortex screw 1-6214.032 71225032 4.5 mm x 32 mm cortex screw 1-6214.034 71225034 4.5 mm x 34 mm cortex screw 1-6214.036 71225036 4.5 mm x 36 mm cortex screw 1-6214.038 71225038 4.5 mm x 38 mm cortex screw 1-6214.040 71225040 4.5 mm x 40 mm cortex screw 1-6214.042 71225042 4.5 mm x 42 mm cortex screw 1-6214.044 71225044 4.5 mm x 44 mm cortex screw 1-6214.046 71225046 4.5 mm x 46 mm cortex screw 1-6214.048 71225048 4.5 mm x 48 mm cortex screw 1-6214.050 71225050 4.5 mm x 50 mm cortex screw 1-6214.052 71225052 4.5 mm x 52 mm cortex screw 1-6214.054 71225054 4.5 mm x 54 mm cortex screw 1-6214.056 71225056 4.5 mm x 56 mm cortex screw 1-6214.058 71225058 4.5 mm x 58 mm cortex screw 1-6214.060 71225060 4.5 mm x 60 mm cortex screw 1-6214.062 71225062 4.5 mm x 62 mm cortex screw 1-6214.064 71225064 4.5 mm x 64 mm cortex screw 1-6214.066 71225066 4.5 mm x 66 mm cortex screw 1-6214.068 71225068 4.5 mm x 68 mm cortex screw 1-6214.070 71225070 4.5 mm x 70 mm cortex screw 1-6214.072 71225072 4.5 mm x 72 mm cortex screw 1-6214.076 71225076 4.5 mm x 76 mm cortex screw 1-6214.080 71225080 4.5 mm x 80 mm cortex screw 1-6214.085 71225085 4.5 mm x 85 mm cortex screw 1-6214.090 71225090 4.5 mm x 90 mm cortex screw 1-6

214.095 71225095 4.5 mm x 95 mm cortex screw 1-6214.100 71225100 4.5 mm x 100 mm cortex screw 1-6214.105 71225105 4.5 mm x 105 mm cortex screw 1-6214.110 71225110 4.5 mm x 110 mm cortex screw 1-6214.115 71225115 4.5 mm x 115 mm cortex screw 1-6214.120 71225120 4.5 mm x 120 mm cortex screw 1-6214.125 71225125 4.5 mm x 125 mm cortex screw 1-6214.130 71225130 4.5 mm x 130 mm cortex screw 1-6214.135 71225135 4.5 mm x 135 mm cortex screw 1-6214.140 71225140 4.5 mm x 140 mm cortex screw 1-6214.145 71225145 4.5 mm x 145 mm cortex screw 1-6

214.222 71225822 4.5 mm x 22 mm x 12 mm shaft screw, sterile 1-7214.224 71225824 4.5 mm x 24 mm x 12 mm shaft screw, sterile 1-7214.226 71225826 4.5 mm x 26 mm x 12 mm shaft screw, sterile 1-7214.228 71225828 4.5 mm x 28 mm x 12 mm shaft screw, sterile 1-7214.230 71225830 4.5 mm x 30 mm x 12 mm shaft screw, sterile 1-7214.232 71225832 4.5 mm x 32 mm x 12 mm shaft screw, sterile 1-7214.234 71225834 4.5 mm x 34 mm x 12 mm shaft screw, sterile 1-7214.236 71225836 4.5 mm x 36 mm x 12 mm shaft screw, sterile 1-7214.238 71225838 4.5 mm x 38 mm x 12 mm shaft screw, sterile 1-7214.240 71225840 4.5 mm x 40 mm x 12 mm shaft screw, sterile 1-7214.242 71225842 4.5 mm x 42 mm x 12 mm shaft screw, sterile 1-7214.244 71225844 4.5 mm x 44 mm x 12 mm shaft screw, sterile 1-7214.246 71225846 4.5 mm x 46 mm x 12 mm shaft screw, sterile 1-7214.248 71225848 4.5 mm x 48 mm x 12 mm shaft screw, sterile 1-7214.250 71225850 4.5 mm x 50 mm x 12 mm shaft screw, sterile 1-7214.252 71225852 4.5 mm x 52 mm x 15 mm shaft screw, sterile 1-7214.254 71225854 4.5 mm x 54 mm x 15 mm shaft screw, sterile 1-7214.256 71225856 4.5 mm x 56 mm x 15 mm shaft screw, sterile 1-7214.258 71225858 4.5 mm x 58 mm x 15 mm shaft screw, sterile 1-7214.260 71225860 4.5 mm x 60 mm x 15 mm shaft screw, sterile 1-7214.264 71225864 4.5 mm x 64 mm x 18 mm shaft screw, sterile 1-7214.268 71225868 4.5 mm x 68 mm x 18 mm shaft screw, sterile 1-7214.272 71225872 4.5 mm x 72 mm x 18 mm shaft screw, sterile 1-7214.276 71225876 4.5 mm x 76 mm x 18 mm shaft screw, sterile 1-7214.280 71225880 4.5 mm x 80 mm x 18 mm shaft screw, sterile 1-7214.285 71225885 4.5 mm x 85 mm x 22 mm shaft screw, sterile 1-7214.290 71225890 4.5 mm x 90 mm x 22 mm shaft screw, sterile 1-7214.295 71225895 4.5 mm x 95 mm x 26 mm shaft screw, sterile 1-7214.300 71225900 4.5 mm x 100 mm x 26 mm shaft screw, sterile 1-7

214.814 71149714 4.5 mm x 14 mm self-tapping screw, hex socket 1-6214.816 71149716 4.5 mm x 16 mm self-tapping screw, hex socket 1-6214.818 71149718 4.5 mm x 18 mm self-tapping screw, hex socket 1-6214.820 71149720 4.5 mm x 20 mm self-tapping screw, hex socket 1-6214.822 71149722 4.5 mm x 22 mm self-tapping screw, hex socket 1-6214.824 71149724 4.5 mm x 24 mm self-tapping screw, hex socket 1-6214.826 71149726 4.5 mm x 26 mm self-tapping screw, hex socket 1-6214.828 71149728 4.5 mm x 28 mm self-tapping screw, hex socket 1-6214.830 71149730 4.5 mm x 30 mm self-tapping screw, hex socket 1-6214.832 71149732 4.5 mm x 32 mm self-tapping screw, hex socket 1-6214.834 71149734 4.5 mm x 34 mm self-tapping screw, hex socket 1-6214.836 71149736 4.5 mm x 36 mm self-tapping screw, hex socket 1-6214.838 71149738 4.5 mm x 38 mm self-tapping screw, hex socket 1-6214.840 71149740 4.5 mm x 40 mm self-tapping screw, hex socket 1-6214.842 71149742 4.5 mm x 42 mm self-tapping screw, hex socket 1-6214.844 71149744 4.5 mm x 44 mm self-tapping screw, hex socket 1-6214.846 71149746 4.5 mm x 46 mm self-tapping screw, hex socket 1-6214.848 71149748 4.5 mm x 48 mm self-tapping screw, hex socket 1-6214.850 71149750 4.5 mm x 50 mm self-tapping screw, hex socket 1-6214.852 71149752 4.5 mm x 52 mm self-tapping screw, hex socket 1-6214.854 71149754 4.5 mm x 54 mm self-tapping screw, hex socket 1-6214.856 71149756 4.5 mm x 56 mm self-tapping screw, hex socket 1-6214.858 71149758 4.5 mm x 58 mm self-tapping screw, hex socket 1-6214.860 71149760 4.5 mm x 60 mm self-tapping screw, hex socket 1-6214.862 71149762 4.5 mm x 62 mm self-tapping screw, hex socket 1-6214.864 71149764 4.5 mm x 64 mm self-tapping screw, hex socket 1-6214.866 71149766 4.5 mm x 66 mm self-tapping screw, hex socket 1-6214.868 71149768 4.5 mm x 68 mm self-tapping screw, hex socket 1-6214.870 71149770 4.5 mm x 70 mm self-tapping screw, hex socket 1-6214.872 71149772 4.5 mm x 72 mm self-tapping screw, hex socket 1-6214.876 71149776 4.5 mm x 76 mm self-tapping screw, hex socket 1-6214.880 71149780 4.5 mm x 80 mm self-tapping screw, hex socket 1-6


6-17

214.885 71149785 4.5 mm x 85 mm self-tapping screw, hex socket 1-6214.890 71149790 4.5 mm x 90 mm self-tapping screw, hex socket 1-6214.895 71149795 4.5 mm x 95 mm self-tapping screw, hex socket 1-6214.900 71149800 4.5 mm x 100 mm self-tapping screw, hex socket 1-6214.905 71149805 4.5 mm x 105 mm self-tapping screw, hex socket 1-6214.910 71149810 4.5 mm x 110 mm self-tapping screw, hex socket 1-6214.915 71149815 4.5 mm x 115 mm self-tapping screw, hex socket 1-6214.920 71149820 4.5 mm x 120 mm self-tapping screw, hex socket 1-6214.925 71149825 4.5 mm x 125 mm self-tapping screw, hex socket 1-6214.930 71149830 4.5 mm x 130 mm self-tapping screw, hex socket 1-6214.935 71149835 4.5 mm x 135 mm self-tapping screw, hex socket 1-6214.940 71149840 4.5 mm x 140 mm self-tapping screw, hex socket 1-6214.945 71149845 4.5 mm x 145 mm self-tapping screw, hex socket 1-6

215.025 71225225 4.5 x 25 mm x 12 mm malleolar screw, sterile 1-7215.030 71225230 4.5 x 30 mm x 15 mm malleolar screw, sterile 1-7215.035 71225235 4.5 x 35 mm x 18 mm malleolar screw, sterile 1-7215.040 71225240 4.5 x 40 mm x 20 mm malleolar screw, sterile 1-7215.045 71225245 4.5 x 45 mm x 22 mm malleolar screw, sterile 1-7215.050 71225250 4.5 x 50 mm x 24 mm malleolar screw, sterile 1-7215.055 71225255 4.5 x 55 mm x 26 mm malleolar screw, sterile 1-7215.060 71225260 4.5 x 60 mm x 28 mm malleolar screw, sterile 1-7215.065 71225265 4.5 x 65 mm x 30 mm malleolar screw, sterile 1-7215.070 71225270 4.5 x 70 mm x 32 mm malleolar screw, sterile 1-7

216.030 71226030 6.5 mm x 16 mm x 30 mm cancellous screw 1-8216.035 71226035 6.5 mm x 16 mm x 35 mm cancellous screw 1-8216.040 71226040 6.5 mm x 16 mm x 40 mm cancellous screw 1-8216.045 71226045 6.5 mm x 16 mm x 45 mm cancellous screw 1-8216.050 71226050 6.5 mm x 16 mm x 50 mm cancellous screw 1-8216.055 71226055 6.5 mm x 16 mm x 55 mm cancellous screw 1-8216.060 71226060 6.5 mm x 16 mm x 60 mm cancellous screw 1-8216.065 71226065 6.5 mm x 16 mm x 65 mm cancellous screw 1-8216.070 71226070 6.5 mm x 16 mm x 70 mm cancellous screw 1-8216.075 71226075 6.5 mm x 16 mm x 75 mm cancellous screw 1-8216.080 71226080 6.5 mm x 16 mm x 80 mm cancellous screw 1-8216.085 71226085 6.5 mm x 16 mm x 85 mm cancellous screw 1-8216.090 71226090 6.5 mm x 16 mm x 90 mm cancellous screw 1-8216.095 71226095 6.5 mm x 16 mm x 95 mm cancellous screw 1-8216.100 71226100 6.5 mm x 16 mm x 100 mm cancellous screw 1-8216.105 71226105 6.5 mm x 16 mm x 105 mm cancellous screw 1-8216.110 71226110 6.5 mm x 16 mm x 110 mm cancellous screw 1-8216.115 71226115 6.5 mm x 16 mm x 115 mm cancellous screw 1-8216.120 71226120 6.5 mm x 16 mm x 120 mm cancellous screw 1-8216.125 71226125 6.5 mm x 16 mm x 125 mm cancellous screw 1-8216.130 71226130 6.5 mm x 16 mm x 130 mm cancellous screw 1-8216.135 71226135 6.5 mm x 16 mm x 135 mm cancellous screw 1-8216.140 71226140 6.5 mm x 16 mm x 140 mm cancellous screw 1-8216.145 71226145 6.5 mm x 16 mm x 145 mm cancellous screw 1-8216.150 71226150 6.5 mm x 16 mm x 150 mm cancellous screw 1-8

217.045 71228045 6.5 mm x 32 mm x 45 mm cancellous screw 1-9217.050 71228050 6.5 mm x 32 mm x 50 mm cancellous screw 1-9217.055 71228055 6.5 mm x 32 mm x 55 mm cancellous screw 1-9217.060 71228060 6.5 mm x 32 mm x 60 mm cancellous screw 1-9217.065 71228065 6.5 mm x 32 mm x 65 mm cancellous screw 1-9217.070 71228070 6.5 mm x 32 mm x 70 mm cancellous screw 1-9217.075 71228075 6.5 mm x 32 mm x 75 mm cancellous screw 1-9217.080 71228080 6.5 mm x 32 mm x 80 mm cancellous screw 1-9217.085 71228085 6.5 mm x 32 mm x 85 mm cancellous screw 1-9217.090 71228090 6.5 mm x 32 mm x 90 mm cancellous screw 1-9217.095 71228095 6.5 mm x 32 mm x 95 mm cancellous screw 1-9217.100 71228100 6.5 mm x 32 mm x 100 mm cancellous screw 1-9217.105 71228105 6.5 mm x 32 mm x 105 mm cancellous screw 1-9217.110 71228110 6.5 mm x 32 mm x 110 mm cancellous screw 1-9217.115 71228115 6.5 mm x 32 mm x 115 mm cancellous screw 1-9217.120 71228120 6.5 mm x 32 mm x 120 mm cancellous screw 1-9217.125 71228125 6.5 mm x 32 mm x 125 mm cancellous screw 1-9217.130 71228130 6.5 mm x 32 mm x 130 mm cancellous screw 1-9217.135 71228135 6.5 mm x 32 mm x 135 mm cancellous screw 1-9217.140 71228140 6.5 mm x 32 mm x 140 mm cancellous screw 1-9217.145 71228145 6.5 mm x 32 mm x 145 mm cancellous screw 1-9217.150 71228150 6.5 mm x 32 mm x 150 mm cancellous screw 1-9

218.025 71229025 6.5 mm x full thread x 25 mm cancellous screw 1-9218.030 71229030 6.5 mm x full thread x 30 mm cancellous screw 1-9218.035 71229035 6.5 mm x full thread x 35 mm cancellous screw 1-9218.040 71229040 6.5 mm x full thread x 40 mm cancellous screw 1-9218.045 71229045 6.5 mm x full thread x 45 mm cancellous screw 1-9218.050 71229050 6.5 mm x full thread x 50 mm cancellous screw 1-9218.055 71229055 6.5 mm x full thread x 55 mm cancellous screw 1-9218.060 71229060 6.5 mm x full thread x 60 mm cancellous screw 1-9218.065 71229065 6.5 mm x full thread x 65 mm cancellous screw 1-9218.070 71229070 6.5 mm x full thread x 70 mm cancellous screw 1-9218.075 71229075 6.5 mm x full thread x 75 mm cancellous screw 1-9218.080 71229080 6.5 mm x full thread x 80 mm cancellous screw 1-9218.085 71229085 6.5 mm x full thread x 85 mm cancellous screw 1-9218.090 71229090 6.5 mm x full thread x 90 mm cancellous screw 1-9218.095 71229095 6.5 mm x full thread x 95 mm cancellous screw 1-9218.100 71229100 6.5 mm x full thread x 100 mm cancellous screw 1-9218.105 71229105 6.5 mm x full thread x 105 mm cancellous screw 1-9218.110 71229110 6.5 mm x full thread x 110 mm cancellous screw 1-9218.115 71229115 6.5 mm x full thread x 115 mm cancellous screw 1-9218.120 71229120 6.5 mm x full thread x 120 mm cancellous screw 1-9218.125 71229125 6.5 mm x full thread x 125 mm cancellous screw 1-9218.130 71229130 6.5 mm x full thread x 130 mm cancellous screw 1-9218.135 71229135 6.5 mm x full thread x 135 mm cancellous screw 1-9218.140 71229140 6.5 mm x full thread x 140 mm cancellous screw 1-9218.145 71229145 6.5 mm x full thread x 145 mm cancellous screw 1-9218.150 71229150 6.5 mm x full thread x 150 mm cancellous screw 1-9

219.96 71143045 nut for 4.5 mm cortical screws, sterile 5-1219.97 71143004 4.5 mm washer (6/box), sterile, 2.2 mm I.D. 5-1219.98 71143007 7.0 mm washer (6/box), sterile, 3.7 mm I.D. 5-1219.91 71143010 10.0 mm washer (6/box), sterile, 4.7 mm I.D. 5-1219.99 71143013 13.0 mm washer (6/box), sterile, 6.7 mm I.D. 5-1219.97 71143104 4.5 mm washer (6/box), 2.2 mm I.D. 5-1219.98 71143107 7.0 mm washer (6/box), 3.7 mm I.D. 5-1219.91 71143110 10.0 mm washer (6/box), 4.7 mm I.D. 5-1219.99 71143113 13.0 mm washer (6/box), 6.7 mm I.D. 5-1

222.02 71141302 semi-tubular plate, 2 holes, 39 mm 2-8222.03 71141303 semi-tubular plate, 3 holes, 55 mm 2-8222.04 71141304 semi-tubular plate, 4 holes, 71 mm 2-8222.05 71141305 semi-tubular plate, 5 holes, 87 mm 2-8222.06 71141306 semi-tubular plate, 6 holes, 103 mm 2-8222.07 71141307 semi-tubular plate, 7 holes, 119 mm 2-8222.08 71141308 semi-tubular plate, 8 holes, 135 mm 2-8222.09 71141309 semi-tubular plate, 9 holes, 151 mm 2-8222.10 71141310 semi-tubular plate, 10 holes, 167 mm 2-8222.11 71141311 semi-tubular plate, 11 holes, 183 mm 2-8222.12 71141312 semi-tubular plate, 12 holes, 199 mm 2-8

224.02 71141402 4.5 mm narrow compression plate, 2 holes, 39 mm 2-8224.03 71141403 4.5 mm narrow compression plate, 3 holes, 55 mm 2-8224.04 71141404 4.5 mm narrow compression plate, 4 holes, 71 mm 2-8224.05 71141405 4.5 mm narrow compression plate, 5 holes, 87 mm 2-8224.06 71141406 4.5 mm narrow compression plate, 6 holes, 103 mm 2-8224.07 71141407 4.5 mm narrow compression plate, 7 holes, 119 mm 2-8224.08 71141408 4.5 mm narrow compression plate, 8 holes, 135 mm 2-8224.09 71141409 4.5 mm narrow compression plate, 9 holes, 151 mm 2-8224.10 71141410 4.5 mm narrow compression plate, 10 holes, 167 mm 2-8224.11 71141411 4.5 mm narrow compression plate, 11 holes, 183 mm 2-8224.12 71141412 4.5 mm narrow compression plate, 12 holes, 199 mm 2-8224.13 71141413 4.5 mm narrow compression plate, 13 holes, 215 mm 2-8224.14 71141414 4.5 mm narrow compression plate, 14 holes, 231 mm 2-8224.15 71141415 4.5 mm narrow compression plate, 15 holes, 247 mm 2-8224.16 71141416 4.5 mm narrow compression plate, 16 holes, 263 mm 2-8224.18 71141418 4.5 mm narrow compression plate, 18 holes, 295 mm 2-8224.20 71141420 4.5 mm narrow compression plate, 20 holes, 326 mm 2-8224.22 71141422 4.5 mm narrow compression plate, 22 holes, 358 mm 2-8224.24 71141424 4.5 mm narrow compression plate, 24 holes, 390 mm 2-8

226.06 71141206 4.5 mm broad compression plate, 6 holes, 103 mm 2-8226.07 71141207 4.5 mm broad compression plate, 7 holes, 119 mm 2-8226.08 71141208 4.5 mm broad compression plate, 8 holes, 135 mm 2-8226.09 71141209 4.5 mm broad compression plate, 9 holes, 151 mm 2-8226.10 71141210 4.5 mm broad compression plate, 10 holes, 167 mm 2-8


6-18

226.12 71141212 4.5 mm broad compression plate, 12 holes, 199 mm 2-8226.14 71141214 4.5 mm broad compression plate, 14 holes, 231 mm 2-8226.16 71141216 4.5 mm broad compression plate, 16 holes, 263 mm 2-8226.18 71141218 4.5 mm broad compression plate, 18 holes, 295 mm 2-8226.20 71141220 4.5 mm broad compression plate, 20 holes, 326 mm 2-8226.22 71141222 4.5 mm broad compression plate, 22 holes, 358 mm 2-8226.24 71141224 4.5 mm broad compression plate, 24 holes, 390 mm 2-8226.26 71141226 4.5 mm broad compression plate, 26 holes, 423 mm 2-8

229.33 71140003 4.5 mm reconstruction plate, 3 holes, 45 mm 2-11229.34 71140004 4.5 mm reconstruction plate, 4 holes, 61 mm 2-11229.35 71140005 4.5 mm reconstruction plate, 5 holes, 77 mm 2-11229.36 71140006 4.5 mm reconstruction plate, 6 holes, 93 mm 2-11229.37 71140007 4.5 mm reconstruction plate, 7 holes, 109 mm 2-11229.38 71140008 4.5 mm reconstruction plate, 8 holes, 125 mm 2-11229.39 71140009 4.5 mm reconstruction plate, 9 holes, 141 mm 2-11229.40 71140010 4.5 mm reconstruction plate, 10 holes, 157 mm 2-11229.41 71140011 4.5 mm reconstruction plate, 11 holes, 173 mm 2-11229.42 71140012 4.5 mm reconstruction plate, 12 holes, 189 mm 2-11229.43 71140013 4.5 mm reconstruction plate, 13 holes, 205 mm 2-11229.44 71140014 4.5 mm reconstruction plate, 14 holes, 221 mm 2-11229.45 71140015 4.5 mm reconstruction plate, 15 holes, 237 mm 2-11229.46 71140016 4.5 mm reconstruction plate, 16 holes, 253 mm 2-11

235.17 71225620 Child Osteotomy, 3H, A:80,° B:35 mm, D:8 mm 2-12235.19 71225621 Child Osteotomy, 3H, A:80,° B:45 mm, D:8 mm 2-12235.27 71225622 Child Osteotomy, 3H, A:90,° B:35 mm, D:8 mm 2-12235.29 71225623 Child Osteotomy, 3H, A:90,° B:45 mm, D:8 mm 2-12235.37 71225624 Child Osteotomy, 3H, A:100,° B:35 mm, D:8 mm 2-12235.39 71225625 Child Osteotomy, 3H, A:100,° B:45 mm, D:8 mm 2-12235.60 71225642 90,° Adolescent Osteotomy, 3H, B:50 mm, D:10 mm 2-14235.68 71225640 90,° Adolescent Osteotomy, 3H, B:40 mm, D:10 mm 2-14235.70 71225643 90,° Adolescent Osteotomy, 3H, B:50 mm, D:15 mm 2-14235.72 71225644 90,° Adolescent Osteotomy, 3H, B:60 mm, D:15 mm 2-14235.78 71225641 90,° Adolescent Osteotomy, 3H, B:40 mm, D:15 mm 2-14236.25 71225600 90,° Infant Osteotomy, 3H, B:25 mm, D:7 mm 2-12236.26 71225602 90,° Infant Osteotomy, 3H, B:32 mm, D:7 mm 2-12236.35 71225601 90,° Infant Osteotomy, 3H, B:25 mm, D:12 mm 2-12236.36 71225603 90,° Infant Osteotomy, 3H, B:32 mm, D:12 mm 2-12236.40 71225610 115,° Bifurcated Infant, B:30 mm, D:5 mm 2-12236.43 71225611 115,° Bifurcated Infant, B:35 mm, D:5 mm 2-12

237.20 71225412 95,° Adult Condylar, 12H, S:204 mm, B:50 mm 2-15237.22 71225413 95,° Adult Condylar, 12H, S:204 mm, B:60 mm 2-15237.24 71225414 95,° Adult Condylar, 12H, S:204 mm, B:70 mm 2-15237.26 71225415 95,° Adult Condylar, 12H, S:204 mm, B:80 mm 2-15237.40 71225416 95,° Adult Condylar, 14H, S:235 mm, B:50 mm 2-15237.42 71225417 95,° Adult Condylar, 14H, S:235 mm, B:60 mm 2-15237.44 71225418 95,° Adult Condylar, 14H, S:235 mm, B:70 mm 2-15237.46 71225419 95,° Adult Condylar, 14H, S:235 mm, B:80 mm 2-15237.50 71225400 95,° Adult Condylar, 5H, S:92 mm, B:50 mm 2-15237.52 71225401 95,° Adult Condylar, 5H, S:92 mm, B:60 mm 2-15237.54 71225402 95,° Adult Condylar, 5H, S:92 mm, B:70 mm 2-15237.56 71225403 95,° Adult Condylar, 5H, S:92 mm, B:80 mm 2-15237.62 71225420 95,° Adult Condylar, 16H, S:267 mm, B:60 mm 2-15237.64 71225421 95,° Adult Condylar, 16H, S:267 mm, B:70 mm 2-15237.66 71225422 95,° Adult Condylar, 16H, S:267 mm, B: 80 mm 2-15237.70 71225404 95,° Adult Condylar, 7H, S:124 mm, B:50 mm 2-15237.72 71225405 95,° Adult Condylar, 7H, S:124 mm, B:60 mm 2-15237.74 71225406 95,° Adult Condylar, 7H, S:124 mm, B:70 mm 2-15237.76 71225407 95,° Adult Condylar, 7H, S:124 mm, B:80 mm 2-15237.82 71225423 95,° Adult Condylar, 18H, S:299 mm, B:60 mm 2-15237.84 71225424 95,° Adult Condylar, 18H, S:299 mm, B:70 mm 2-15237.86 71225425 95,° Adult Condylar, 18H, S:299 mm, B:80 mm 2-15237.90 71225408 95,° Adult Condylar, 9H, S:156 mm, B:50 mm 2-15237.92 71225409 95,° Adult Condylar, 9H, S:156 mm, B:60 mm 2-15237.94 71225410 95,° Adult Condylar, 9H, S:156 mm, B:70 mm 2-15237.96 71225411 95,° Adult Condylar, 9H, S:156 mm, B:80 mm 2-15

238.24 71225519 130,° Adult Angled Blade, 12H, S:200 mm, B:70 mm 2-16238.26 71225520 130,° Adult Angled Blade, 12H, S:200 mm, B:80 mm 2-16238.28 71225521 130,° Adult Angled Blade, 12H, S:200 mm, B:90 mm 2-16238.36 71225500 130,° Adult Angled Blade, 4H, S:60 mm, B:50 mm 2-16238.38 71225501 130,° Adult Angled Blade, 4H, S:60 mm, B:60 mm 2-16

238.40 71225508 130,° Adult Angled Blade, 4H, S:60 mm, B:100 mm 2-16238.41 71225509 130,° Adult Angled Blade, 4H, S:60 mm, B:105 mm 2-16238.42 71225510 130,° Adult Angled Blade, 4H, S:60 mm, B:110 mm 2-16238.44 71225502 130,° Adult Angled Blade, 4H, S:60 mm, B:70 mm 2-16238.45 71225503 130,° Adult Angled Blade, 4H, S:60 mm, B:75 mm 2-16238.46 71225504 130,° Adult Angled Blade, 4H, S:60 mm, B:80 mm 2-16238.47 71225505 130,° Adult Angled Blade, 4H, S:60 mm, B:85 mm 2-16238.48 71225506 130,° Adult Angled Blade, 4H, S:60 mm, B:90 mm 2-16238.49 71225507 130,° Adult Angled Blade, 4H, S:60 mm, B:95 mm 2-16238.60 71225511 130,° Adult Angled Blade, 6H, S:104 mm, B:50 mm 2-16238.62 71225512 130,° Adult Angled Blade, 6H, S:104 mm, B:60 mm 2-16238.64 71225513 130,° Adult Angled Blade, 6H, S:104 mm, B:70 mm 2-16238.66 71225514 130,° Adult Angled Blade, 6H, S:104 mm, B:80 mm 2-16238.68 71225515 130,° Adult Angled Blade, 6H, S:104 mm, B:90 mm 2-16238.94 71225516 130,° Adult Angled Blade, 9H, S:152 mm, B:70 mm 2-16238.96 71225517 130,° Adult Angled Blade, 9H, S:152 mm, B:80 mm 2-16238.98 71225518 130,° Adult Angled Blade, 9H, S:152 mm, B:90 mm 2-16

239.20 71225321 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:50 mm 2-14239.21 71225322 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:55 mm 2-14239.22 71225323 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:60 mm 2-14239.23 71225324 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:65 mm 2-14239.24 71225325 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:70 mm 2-14na 71225326 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:80 mm 2-14239.28 71225320 Adult Osteotomy PL. 4H, 90,° D:10 mm, B:40 mm 2-14239.30 71225339 Adult Osteotomy PL. 4H,100,° D:10 mm, B:50 mm 2-14239.32 71225340 Adult Osteotomy PL. 4H,100,° D:10 mm, B:60 mm 2-14239.43 71225341 Adult Osteotomy PL. 4H, 110,° B:65 mm 2-14239.45 71225342 Adult Osteotomy PL. 4H, 110,° B:75 mm 2-14239.47 71225343 Adult Osteotomy PL. 4H, 110,° B:85 mm 2-14239.53 71225344 Adult Osteotomy PL. 4H, 120,° B:65 mm 2-14239.55 71225345 Adult Osteotomy PL. 4H, 120,° B:75 mm 2-14239.57 71225346 Adult Osteotomy PL. 4H, 120,° B:85 mm 2-14239.60 71225335 Adult Osteotomy PL. 4H, 90,° D:20 mm, B:50 mm 2-14239.62 71225336 Adult Osteotomy PL. 4H, 90,° D:20 mm, B:60 mm 2-14239.64 71225337 Adult Osteotomy PL. 4H, 90,° D:20 mm, B:70 mm 2-14239.65 71225338 Adult Osteotomy PL. 4H, 90,° D:20 mm, B:75 mm 2-14239.70 71225328 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:50 mm 2-14239.71 71225329 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:55 mm 2-14239.72 71225330 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:60 mm 2-14239.73 71225331 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:65 mm 2-14239.74 71225332 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:70 mm 2-14239.75 71225333 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:75 mm 2-14239.76 71225334 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:80 mm 2-14239.78 71225327 Adult Osteotomy PL. 4H, 90,° D:15 mm, B:40 mm 2-14239.80 71225354 Adult Osteotomy PL. 4H, 130,° B:100 mm 2-14239.81 71225355 Adult Osteotomy PL. 4H, 130,° B:105 mm 2-14239.82 71225356 Adult Osteotomy PL. 4H, 130,° B:110 mm 2-14239.83 71225347 Adult Osteotomy PL. 4H, 130,° B:65 mm 2-14239.84 71225348 Adult Osteotomy PL. 4H, 130,° B:70 mm 2-14239.85 71225349 Adult Osteotomy PL. 4H, 130,° B:75 mm 2-14239.86 71225350 Adult Osteotomy PL. 4H, 130,° B:80 mm 2-14239.87 71225351 Adult Osteotomy PL. 4H, 130,° B:85 mm 2-14239.88 71225352 Adult Osteotomy PL. 4H, 130,° B:90 mm 2-14239.89 71225353 Adult Osteotomy PL. 4H, 130,° B:95 mm 2-14

240.05 71141505 spoon plate 5 holes in shaft, 100 mm 2-10240.06 71141506 spoon plate 6 holes in shaft, 120 mm 2-10240.13 71141603 T-plate, 3 holes in shaft, 68 mm 2-9240.14 71141604 T-plate, 4 holes in shaft, 84 mm 2-9240.15 71141605 T-plate, 5 holes in shaft, 100 mm 2-9240.16 71141606 T-plate, 6 holes in shaft, 116 mm 2-9240.18 71141608 T-plate, 8 holes in shaft, 148 mm 2-9240.207 71140627 cloverleaf plate, 7 holes, 152 mm, sterile 2-6240.208 71140628 cloverleaf plate, 8 holes, 168 mm, sterile 2-6

240.34 71140704 T-buttress plate 4 holes, 80 mm 2-9240.35 71140705 T-buttress plate 5 holes, 96 mm 2-9240.36 71140706 T-buttress plate 6 holes, 112 mm 2-9240.44 71140804 L-buttress plate, 4 holes angled left, 86 mm 2-9240.54 71140904 L-buttress plate, 4 holes angled right, 86 mm 2-9

240.403 71141003 lateral tibial head buttress plate, 3 hole right, sterile 2-9240.503 71141103 lateral tibial head buttress plate, 3 hole left, sterile 2-9


6-19

240.46 71141005 lateral tibial head buttress plate, 5 hole right, 118 mm 2-9240.56 71141105 lateral tibial head buttress plate, 5 hole left, 118 mm 2-9240.47 71141007 lateral tibial head buttress plate, 7 hole right, 149 mm 2-9240.57 71141107 lateral tibial head buttress plate, 7 hole left, 149 mm 2-9240.48 71141009 lateral tibial head buttress plate, 9 hole right, 181 mm 2-9240.58 71141109 lateral tibial head buttress plate, 9 hole left, 181 mm 2-9240.49 71141011 lateral tibial head buttress plate, 11 hole right, 214 mm 2-9240.59 71141111 lateral tibial head buttress plate, 11 hole left, 214 mm 2-9240.50 71141013 lateral tibial head buttress plate, 13 hole right, 246 mm 2-9240.60 71141113 lateral tibial head buttress plate, 13 hole left, 246 mm 2-9

240.70 71142011 condylar buttress plate 11 holes left, 221 mm 2-10240.73 71142111 condylar buttress plate 11 holes right, 221 mm 2-10240.71 71142013 condylar buttress plate 13 holes left, 253 mm 2-10240.74 71142113 condylar buttress plate 13 holes right, 253 mm 2-10240.72 71142015 condylar buttress plate 15 holes left, 285 mm 2-10240.75 71142115 condylar buttress plate 15 holes right, 285 mm 2-10240.80 71141704 hook plate, 4 holes, 123 mm 2-10240.92 71142007 condylar buttress plate 7 holes left, 158 mm 2-10240.94 71142107 condylar buttress plate 7 holes right, 158 mm 2-10240.93 71142009 condylar buttress plate 9 holes left, 190 mm 2-10240.95 71142109 condylar buttress plate 9 holes right, 190 mm 2-10

240.98 71141808 cobra head plate 8 holes, 170 mm 2-10240.99 71141809 cobra head plate 9 holes, 188 mm 2-10240.90 71141810 cobra head plate 10 holes, 202 mm 2-10240.91 71141811 cobra head plate 11 holes, 218 mm 2-10

241.13 71140403 small T-plate, right angle, 3 head 3 shaft holes, 50 mm 2-5241.14 71140404 small T-plate, right angle, 4 head 4 shaft holes, 56 mm 2-5241.15 71140405 small T-plate, right angle, 3 head 5 shaft holes, 67 mm 2-5241.16 71140406 small T-plate, right angle, 4 head 6 shaft holes, 78 mm 2-5241.23 71140503 small T-plate, oblique, 3 head 3 shaft holes, 53 mm 2-5241.24 71140504 small T-plate, oblique, 3 head 4 shaft holes, 63 mm 2-5241.25 71140505 small T-plate, oblique, 3 head 5 shaft holes, 73 mm 2-5

241.32 71140302 1/3 tubular plate with collar, 2 holes, 25 mm 2-5241.33 71140303 1/3 tubular plate with collar, 3 holes, 37 mm 2-5241.34 71140304 1/3 tubular plate with collar, 4 holes, 49 mm 2-5241.35 71140305 1/3 tubular plate with collar, 5 holes, 61 mm 2-5241.36 71140306 1/3 tubular plate with collar, 6 holes, 73 mm 2-5241.37 71140307 1/3 tubular plate with collar, 7 holes, 85 mm 2-5241.38 71140308 1/3 tubular plate with collar, 8 holes, 97 mm 2-5241.39 71140309 1/3 tubular plate with collar, 9 holes, 109 mm 2-5241.40 71140310 1/3 tubular plate with collar, 10 holes, 121 mm 2-5241.42 71140312 1/3 tubular plate with collar, 12 holes, 145 mm 2-5

241.61 71144010 calcaneal plate w/template, 60 mm, sterile 2-7241.62 71144011 calcaneal plate w/template, 70 mm, sterile 2-7241.65 71144012 calcaneal plate w/template 9 hole, sterile 2-7na 91-1123 calcaneal plate 6 hole, special order 2-7na 91-3886 calcaneal plate 8 hole, special order 2-7

241.83 71140603 cloverleaf plate, 3 holes, 88 mm 2-6241.84 71140604 cloverleaf plate, 4 holes, 104 mm 2-6241.85 71140625 cloverleaf plate, 5 holes, 120 mm, sterile 2-6241.86 71140626 cloverleaf plate, 6 holes, 136 mm, sterile 2-6241.87 71140627 cloverleaf plate, 7 holes, 152 mm, sterile 2-6241.88 71140628 cloverleaf plate, 8 holes, 168 mm, sterile 2-6241.89 71140629 cloverleaf plate, 9 holes, 184 mm, sterile 2-6

242.03 71148003 quarter-tubular plate, 3 holes 2-3242.04 71148004 quarter-tubular plate, 4 holes 2-3242.05 71148005 quarter-tubular plate, 5 holes 2-3242.06 71148006 quarter-tubular plate, 6 holes 2-3242.07 71148007 quarter-tubular plate, 7 holes 2-3242.08 71148008 quarter-tubular plate, 8 holes 2-3

242.21 71147012 multi-fragment plate, 7 hole 2-3

242.31 71147003 2.7 mm L-plate, left 2-4242.32 71147001 2.7 mm L-plate, right 2-4242.33 71147002 2.7 mm L-plate, 3 holes, oblique left 2-4242.34 71147004 2.7 mm L-plate, 3 holes, oblique right 2-4

242.41 71147006 2.7 mm T-plate, 3 holes 2-4242.61 71147008 2.7 mm condylar plate, 7 holes, left 2-4242.62 71147010 2.7 mm condylar plate, 7 holes, right 2-4

243.13 71146020 2.0 mm straight plate, 3 holes 2-2243.14 71146022 2.0 mm straight plate, 4 holes 2-2243.15 71146024 2.0 mm straight plate, 5 holes 2-2243.16 71146026 2.0 mm straight plate, 6 holes 2-2243.19 71146028 2.0 mm straight plate, 20 holes, 100 mm 2-2

243.41 71146034 2.0 mm T-plate, 2 holes head, 2 holes shaft 2-2243.23 71146030 2.0 mm T-plate, 3 holes head, 9 holes shaft 2-2243.24 71146032 2.0 mm T-plate, 4 holes head, 9 holes shaft 2-2243.31 71146046 2.0 mm L-plate, left 2-2243.32 71146044 2.0 mm L-plate, right 2-2243.33 71146038 2.0 mm L-plate, oblique, left 2-2243.34 71146036 2.0 mm L-plate, oblique, right 2-2243.48 71146048 2.0 mm H-plate, 4 holes 2-3

243.61 71146040 2.0 mm condylar plate, 7 holes, left 2-3243.62 71146042 2.0 mm condylar plate, 7 holes, right 2-3

244.02 71141900 2.7 mm small compression plate, 2 holes, 20 mm, 2-4sterile










245.14 71140104 3.5 mm reconstruction plate, 4 holes, 46 mm 2-11245.15 71140105 3.5 mm reconstruction plate, 5 holes, 58 mm 2-11245.16 71140106 3.5 mm reconstruction plate, 6 holes, 70 mm 2-11245.17 71140107 3.5 mm reconstruction plate, 7 holes, 82 mm 2-11245.18 71140108 3.5 mm reconstruction plate, 8 holes, 94 mm 2-11245.19 71140109 3.5 mm reconstruction plate, 9 holes, 106 mm 2-11245.00 71140110 3.5 mm reconstruction plate, 10 holes, 118 mm 2-11245.01 71140111 3.5 mm reconstruction plate, 11 holes, 130 mm 2-11245.02 71140112 3.5 mm reconstruction plate, 12 holes, 142 mm 2-11245.03 71140113 3.5 mm reconstruction plate, 13 holes, 154 mm 2-11245.04 71140114 3.5 mm reconstruction plate, 14 holes, 166 mm 2-11245.05 71140115 3.5 mm reconstruction plate, 15 holes, 178 mm 2-11245.06 71140116 3.5 mm reconstruction plate, 16 holes, 190 mm 2-11245.08 71140118 3.5 mm reconstruction plate, 18 holes, 214 mm 2-11245.10 71140120 3.5 mm reconstruction plate, 20 holes, 238 mm 2-11245.12 71140122 3.5 mm reconstruction plate, 22 holes, 263 mm 2-11

245.30 71140606 3.5 mm curved reconstruction plate, 6 holes, 70 mm 2-11245.31 71140608 3.5 mm curved reconstruction plate, 8 holes, 94 mm 2-11245.32 71140610 3.5 mm curved reconstruction plate, 10 holes, 118 mm 2-11245.33 71140612 3.5 mm curved reconstruction plate, 12 holes, 142 mm 2-11245.34 71140614 3.5 mm curved reconstruction plate, 14 holes, 166 mm 2-11245.35 71140616 3.5 mm curved reconstruction plate, 16 holes, 190 mm 2-11245.36 71140618 3.5 mm curved reconstruction plate, 18 holes, 214 mm 2-11

246.19 71145020 1.5 mm straight plate, 20 holes 2-1246.23 71145022 1.5 mm T-plate, 3 holes head, 9 holes shaft 2-1246.24 71145024 1.5 mm T-plate, 4 holes head, 9 holes shaft 2-1246.48 71145030 1.5 mm H-plate, 4 holes 2-1246.61 71145026 1.5 mm condylar plate, 7 holes, left 2-1246.62 71145028 1.5 mm condylar plate, 7 holes, right 2-1


6-20

248.02 71140202 3.5 mm small compression plate, 2 holes, 25 mm 2-5248.03 71140203 3.5 mm small compression plate, 3 holes, 37 mm 2-5248.04 71140204 3.5 mm small compression plate, 4 holes, 49 mm 2-5248.05 71140205 3.5 mm small compression plate, 5 holes, 61 mm 2-5248.06 71140206 3.5 mm small compression plate, 6 holes, 73 mm 2-5248.07 71140207 3.5 mm small compression plate, 7 holes, 85 mm 2-5248.08 71140208 3.5 mm small compression plate, 8 holes, 97 mm 2-5248.09 71140209 3.5 mm small compression plate, 9 holes, 109 mm 2-5248.10 71140210 3.5 mm small compression plate, 10 holes, 121 mm 2-5248.12 71140212 3.5 mm small compression plate, 12 holes, 145 mm 2-5248.14 71140214 3.5 mm small compression plate, 14 holes, 169 mm 2-5248.16 71140216 3.5 mm small compression plate, 16 holes, 194 mm 2-5248.18 71140218 3.5 mm small compression plate, 18 holes, 217 mm 2-5248.20 71140220 3.5 mm small compression plate, 20 holes, 242 mm 2-5248.22 71140222 3.5 mm small compression plate, 22 holes, 265 mm 2-5

282.58 71225430 95,° condylar plate, small stature, 2-135, 92 mm, 40 mm












283.40 71225530 130,° angled blade plate, 4 hole, 60 mm, 50 mm 2-13283.42 71225531 130,° angled blade plate, 4 hole, 60 mm, 60 mm 2-13283.44 71225532 130,° angled blade plate, 4 hole, 60 mm, 70 mm 2-13283.46 71225533 130,° angled blade plate, 4 hole, 60 mm, 80 mm 2-13283.60 71225534 130,° angled blade plate, 6 hole, 104 mm, 50 mm 2-13283.62 71225535 130,° angled blade plate, 6 hole, 104 mm, 60 mm 2-13283.64 71225536 130,° angled blade plate, 6 hole, 104 mm, 70 mm 2-13283.66 71225537 130,° angled blade plate, 6 hole, 104 mm, 80 mm 2-13283.90 71225538 130,° angled blade plate, 9 hole, 152 mm, 50 mm 2-13283.92 71225539 130,° angled blade plate, 9 hole, 152 mm, 60 mm 2-13283.94 71225540 130,° angled blade plate, 9 hole, 152 mm, 70 mm 2-13283.96 71225541 130,° angled blade plate, 9 hole, 152 mm, 80 mm 2-13

291.24 71163006 0.6 mm cerclage wire x 175 mm (6/box), sterile 5-1291.26 71163008 0.8 mm cerclage wire x 200 mm (6/box), sterile 5-1292.06 71161066 0.6 mm K-wire, 70 mm trocar point (6/box), sterile 5-1

(formerly 71162006)292.06 71162006 0.6 mm K-wire, 70 mm trocar point (6/box), sterile 5-1

(now 71161066)292.08 71161008 0.8 mm K-wire, 150 mm trocar point (6/box), sterile 5-1292.10 71161010 1.0 mm K-wire, 150 mm trocar point (6/box), sterile 5-1292.12 71161012 1.25 mm K-wire, 150 mm trocar point (6/box), sterile 5-1292.16 71161016 1.6 mm K-wire, 150 mm trocar point (6/box), sterile 5-1292.20 71161020 2.0 mm K-wire, 150 mm trocar point (6/box), sterile 5-1294.68 71170315 6.0 mm schanz screw, 190 mm diamond point 5-1304.00 71173001 large instrument tray 4-2305.05 71173005 implant tray, large 4-2305.10 71173003 screw caddy for 4.5 mm/6.5 mm screws 4-1305.15 71175005 blade plate instrument tray 4-3305.40 71172001 small fragment tray for instruments & implants 4-1305.50 71171001 mini fragment tray for instrument & implants 4-1306.00 71174001 pelvic instrument tray 4-2306.05 71174003 pelvic reduction instrument tray 4-3306.10 71174005 pelvic implant tray 4-3

310.10 71176511 1.1 mm drill bit, 45 mm length, sterile 3-1310.11 71170001 1.1 mm drill bit, 60 mm/35 mm, quick coupling 3-1310.11S 71176011 1.1 mm drill bit, 60 mm/35 mm, quick coupling, 3-1

sterile310.14 71176515 1.5 mm drill bit, 70 mm length, sterile na310.15 71170003 1.5 mm drill bit, 85 mm/60 mm, quick coupling 3-1310.15 71176015 1.5 mm drill bit, 85 mm/60 mm, quick coupling, 3-1

sterile310.16 71176016 1.5 mm drill bit, 110 mm/85 mm, quick coupling, 3-1

sterile310.16J 71176516 1.5 mm drill bit, 95 mm length, sterile 3-1310.19 71170005 2.0 mm drill bit, 100 mm/75 mm, quick coupling 3-1310.19 71176020 2.0 mm drill bit, 100 mm/75 mm, quick coupling, 3-1

sterile310.20 71176520 2.0 mm drill bit, 85 mm length, sterile na310.21 71176021 2.0 mm drill bit, 125 mm/100 mm, quick coupling, 3-1

sterile310.21J 71176521 2.0 mm drill bit, 110 mm length, sterile 3-1310.23 71176026 2.5 mm drill bit, 180 mm/155 mm, quick coupling, 3-1

gold, sterile310.24 71176525 2.5 mm drill bit, 95 mm length, gold, sterile 3-1310.25 71170071 2.5 mm drill bit, 110 mm/85 mm, quick coupling, 3-1

gold310.25 71176025 2.5 mm drill bit, 110 mm/85 mm, quick coupling, 3-1

gold, sterile310.26 71170007 2.7 mm drill bit, 100 mm/75 mm, quick coupling 3-1310.26 71176027 2.7 mm drill bit, 100 mm/75 mm, quick coupling, 3-1

sterile310.28J 71176528 2.7 mm drill bit, 110 mm/97 mm, sterile 3-1310.28S 71176028 2.7 mm drill bit, 125 mm/100 mm, quick coupling, 3-1

sterile310.29 71176033 3.2 mm drill bit, 195 mm/170 mm, quick coupling, 3-1

sterile310.30 71176533 3.2 mm drill bit, 180 mm/165 mm, sterile 3-1310.31 71170111 3.2 mm drill bit, 145 mm/120 mm, quick coupling 3-1310.31S 71176032 3.2 mm drill bit, 145 mm/120 mm, quick coupling, 3-1

sterile310.32 71176532 3.2 mm drill bit, 130 mm/115 mm, sterile 3-1310.35 71170073 3.5 mm drill bit, 110 mm/85 mm, quick coupling 3-1310.35 71176035 3.5 mm drill bit, 110 mm/85 mm, quick coupling, 3-1

sterile310.36 71176535 3.5 mm drill bit, 95 mm/80 mm, sterile 3-1310.37 71170147 3.5 mm drill bit, 195 mm/170 mm, quick coupling 3-1310.37 71176037 3.5 mm drill bit, 195 mm/170 mm, quick coupling, 3-1



sterile310.49 71176547 4.5 mm drill bit, 180 mm/165 mm, sterile 3-1310.87 71170075 countersink for 2.7 mm, 3.5 mm & 4.0 mm screws 3-2310.88 71170009 countersink, 1.5 mm/2.0 mm screws 3-2310.89 71170075 countersink, small, quick coupling 3-2310.94J 71170072 quick connect adaptor for jacobs chuck 3-5na 71170012 quick connect adaptor, mini PF na310.95 71170013 mini quick coupling handle 3-6310.99 71170115 countersink for 4.5 mm/6.5 mm screws 3-2311.01 71170014 mini quick coupling handle, bulb 3-6311.15 71170017 1.5 mm tap 3-2311.19 71170019 2.0 mm tap 3-2311.26 71170021 2.7 mm tap 3-2311.31 71170157 3.5 mm calibrated tap 3-2311.32 71170077 3.5 mm tap for cortex bone screws, gold 3-2311.34 71170079 4.0 mm tap for cancellous bone screws 3-2311.43 71170015 small quick coupling handle 3-6311.44 71170117 small quick coupling t-handle 3-5311.46 71170119 4.5 mm tap 3-2311.47 71170159 4.5 mm calibrated tap 3-2311.66 71170121 6.5 mm tap 3-2312.14 71170023 1.1 mm/1.5 mm double drill sleeve 3-3


6-21

312.20 71170083 2.0 mm parallel drill guide/sleeve 3-4312.22 71170025 1.5 mm/2.0 mm double drill sleeve 3-3312.24 71170027 2.0 mm/2.7 mm double drill sleeve 3-3312.28 71170085 2.5 mm/3.5 mm double drill sleeve 3-3312.30 71170089 2.5 mm/3.5 mm insert drill sleeve 3-4312.46 71170123 4.5 mm/3.2 mm double drill sleeve 3-3312.48 71170125 4.5 mm/3.2 mm insert drill sleeve 3-4312.67 71170127 6.5 mm/3.2 mm double drill sleeve 3-3313.99 71170037 screwdriver, small cruciform 3-6314.02 71170029 small hex screwdriver w/notches 3-7314.03 71170033 small hex screwdriver shaft, quick coupling 3-6314.06 71170031 holding sleeve, small hex screwdriver, split 3-8314.09 71170167 holding sleeve for small hex screwdriver 3-8314.15 71170137 large hex screwdriver shaft 3-8314.21 71170142 wrench for nut (for 7114-3045) 5-1314.26 71170161 large hex screwdriver, pelvic 3-7314.27 71170133 large hex screwdriver w/grooves 3-7314.31 71170135 holding sleeve for large hex screwdriver 3-8314.55 71170169 small hex screwdriver shaft, long 3-6na 71171035 small hex screwdriver shaft w/notches 3-7314.56 71170163 large hex screwdriver shaft w/grooves 3-8314.57 71170165 small hex screwdriver, 10" 3-7314.67.97 71170034 holding sleeve for mini cruciform & hex shafts 3-8na 71170035 self-holding sleeve for mini screws 3-8na 71170036 mini hex screwdriver shaft 3-6314.67.97 71170037 mini cruciform screwdriver shaft 3-6315.48 71170151 4.5 mm 196 mm/170 mm, three-fluted drill bit, QC 3-2315.48 71176145 4.5 mm 196 mm/170 mm, three-fluted drill bit, QC, 3-2

sterile315.92 71170153 2.5 mm 230 mm/205 mm, three-fluted drill bit, QC 3-2315.92 71176125 2.5 mm 230 mm/205 mm, three-fluted drill bit, QC, 3-2

sterile315.93 71170155 3.2 mm 230 mm/205 mm, three-fluted drill bit, QC 3-2315.93 71176132 3.2 mm 230 mm/205 mm, three-fluted drill bit, QC, 3-2

sterilena 71170038 depth gauge, 1.5/2.0/2.7 mm screws, 38 mm 3-19319.04 71170039 depth gauge, 2.7/3.5/4.0 mm screws, 50 mm 3-19319.05 71170139 depth gauge for 4.5 mm/6.5 mm screws, 110 mm 3-19319.10 71170171 depth gauge for pelvic screws, 120 mm 3-19319.11 71170041 depth gauge, 1.5 mm/2.0 mm screws, 30 mm 3-19319.39 71170043 sharp hook 3-19na 71170002 screw forceps, mini 3-20319.97 71170045 screw forceps, standard 3-20321.12 71170145 articulated tension device w/gauge 3-20321.15 71170143 socket wrench w/universal joint, 11 mm 3-20321.16 71170141 combination wrench, 11 mm 3-20322.21 71170081 2.7 mm drill guide, neutral and load 3-4322.32 71170086 3.5 mm drill guide, neutral & load 3-4322.43 71175545 4.5 mm drill guide, hip 3-24322.44 71170129 4.5 mm drill guide, neutral & load 3-4323.36 71170087 3.5 mm universal drill guide 3-5323.46 71170131 4.5 mm universal drill guide 3-5329.01 71170068 bending iron for mini plates 3-15329.02 71170174 bending (twisting) iron for 4.5 mm plates 3-15329.04 71170101 bending irons, 2.7 mm/3.5 mm plates, left 3-14329.05 71170103 bending irons, 2.7 mm/3.5 mm plates, right 3-14329.08 71170173 bending iron, 3.5 mm recon plates 3-15329.12 71170061 bending pliers for 1.5 mm/2.0 mm plates 3-16329.15 71170076 bending pliers, 2.7 mm/3.5 mm plates 3-16329.29 71170175 bending pliers for 3.5 mm recon plates 3-16329.30 71170176 large bending press 3-15329.52 71171012 bending template, 12 holes, small frag plates 3-17329.55 71170105 bending template, 5 holes 3-17na 71171005 bending template, 5 holes, small frag plates 3-17329.57 71170107 bending template, 7 holes 3-17na 71171007 bending template, 7 holes, small frag plates 3-17na 71171009 bending template, 9 holes, small frag plates 3-17329.64 71170177 bending template, 3.5 mm recon plates, straight 3-17329.66 71170179 bending template, 3.5 mm recon plates, curved 3-17329.68 71170181 bending template, 4.5 mm recon plates, straight 3-17329.92 71170112 bending template, 12 holes, large frag plates 3-17329.99 71170109 bending template, 9 holes, large frag plates 3-17332.01 71175013 triple drill guide 3-21332.05 71175017 router, jacobs chuck 3-21

332.06 71175015 router, quick coupling 3-21332.09 71175100 chisel guide, with adjustable angle 3-21332.12 71175132 seating chisel, for adult, 320 mm 3-21332.13 71175128 seating chisel, for adult, 284 mm 3-21332.14 71175114 seating chisel, for adolescent & child 3-22332.15 71175200 inserter-extractor, for adult & small statured adult 3-22332.17 71175126 seating chisel, for infant, 260 mm 3-21332.18 71175210 inserter-extractor, for adolescent & child 3-22332.20 71175300 slotted hammer 3-23332.21 71175350 impactor 3-22332.35 71175225 inserter for bifurcated infant plate 3-22333.00 71175430 triangular positioning plate, 110/60/10 3-23333.06 71175400 triangular positioning plate, 90/50/40 3-23333.07 71175410 triangular positioning plate, 80/70/30 3-23333.08 71175420 triangular positioning plate, 100/60/20 3-23333.16 71175450 quadrangular positioning plate, 110/90/90/70 3-24333.20 71175460 condylar plate guide 3-24391.82 71170063 wire bending pliers, 140 mm length 3-17391.93 71170078 wire cutter, 220 mm 3-14na 71170042 plate cutting forceps, shear cut 3-9391.95 71170047 plate cutting forceps 3-9391.97 71170065 wire cutter, 175 mm length 3-14392.00 71170099 bending irons, 1.25 mm – 2.0 mm k-wires 3-15393.10 71170183 universal chuck w/t-handle 3-19398.40 71170049 reduction forceps w/points, narrow 3-10398.41 71170051 reduction forceps w/points, broad 3-10398.52 71170185 volkman bone hook, medium 3-18398.53 71170187 large bone hook 3-18398.54 71170189 straight ball spike 3-18398.55 71170191 blunt pelvic retractor 3-17398.71 71170193 spiked disk 3-18398.73 71170213 asymmetric pelvic reduction forceps 3-13398.74 71170195 farabeuf forceps, 190 mm 3-12398.75 71170197 farabeuf forceps, 250 mm 3-12398.79 71170092 self-centering forceps, 150 mm 3-11398.80 71170091 verbrugge self-centering forceps, size 0 3-11398.81 71170046 self-centering forceps w/speed lock, 240 mm 3-11398.82 71170215 self-centering forceps w/speed lock, 260 mm 3-11398.83 71170048 self-centering forceps w/speed lock, 280 mm 3-11398.84 71170199 reduction forceps, pointed-ball tips, 200 mm 3-13398.85 71170203 reduction forceps, pointed-ball tips, 240 mm 3-13398.86 71170207 reduction forceps, pointed-ball tips, 400 mm 3-13398.87 71170209 reduction forceps, 3-pointed-ball tips, 400 mm 3-13398.88 71170211 reduction forceps for use w/screws 3-12398.89 71170205 reduction forceps, angled point-ball tips, 250 mm 3-13398.96 71170053 stagbeetle forceps, 120 mm 3-10398.99 71170056 plate/bone holding forceps 3-9399.00 71170054 plate/bone holding forceps w/foot 3-9399.051 71170050 reduction forceps w/speed lock, 240 mm 3-12399.06 71170217 reduction forceps w/speed lock, 170 mm 3-12399.18 71170055 hohmann retractor, 6 mm width 3-17399.19 71170057 hohmann retractor, 8 mm width 3-17399.36 71170097 periosteal elevator, 6 mm round edge 3-18399.40 71170098 periosteal elevator, 6 mm straight edge 3-18399.42 71175325 hammer, 500g 3-24399.48 71170059 periosteal elevator, 3 mm width 3-18399.49 71170095 hohmann retractor, 15 mm width 3-17399.54 71175500 chisel handle 3-25399.55 71175510 chisel blade, 10 mm 3-25399.56 71175516 chisel blade, 16 mm 3-25399.57 71175525 chisel blade, 25 mm 3-25399.58 71175505 chisel blade, 5 mm 3-25399.97 71170052 reduction forceps w/points, 130 mm, rachet 3-10399.98 71170044 reduction forceps w/points & ratchet, 205 mm 3-11399.99 71170093 reduction forceps w/serrated jaws 3-12


Thread Diameter

Screw Type

Drill Bit for Gliding Hole

Drill Bit for Threaded Hole

Tap

Washer

1.52.0

2.73.5

4.04.5

6.5

1.52.0

1.5

4.54.5

7.07.0

7.010.0 or 13.0

13.0

2.73.5

—4.5

4.5—

2.02.7

3.54.0

4.56.5

CORTEX

Self-Tapping and Non-Self-Tapping

CANCELLOUS

Non-Self-TappingCO

RTEXSelf-Tapping and Non-Self-Tapping

CORTEX

Self-Tapping and Non-Self-Tapping

MALLEO

LARSH

AFTSelf-Tapping

SHAFT

Self-Tapping

Fully Threaded16 m

m Thread

32 mm

ThreadFully Threaded

Threaded Hole

Partially Threaded

(In Hard Bone)

(Excluding Malleolar)

(Excluding Malleolar)

(Not Recomm

ended forSelf-Tapping Screw

s)

1.11.5

2.02.5

2.53.2

3.2

CANCELLOUS

Non-Self-Tapping

TC-10

0 S

CR

EW G

UID

E™

©1999 Sm

ith & N

ephew, Inc. TC-100 is a trademark of Sm

ith & N

ephew, Inc.5/99 7118-0472

The following statem

ent is required by the U.S. FDA:

WARNING: This device is not approved for screw

attachment or fixation

to the posterior elements (pedicles) of the cervical, thoracic or lum

bar spine.

Cruciate or Hex

—

Gliding Hole

SCREW DIAMETER (mm)

DRILL BIT,TAP AND WASHER DIAMETER (mm)

Cover f - Surgical Devices and Advanced Wound Care products · TC-100 was designed to work beyond...

Documents

Transcript of Cover f - Surgical Devices and Advanced Wound Care products · TC-100 was designed to work beyond...