Course Outline Cq103

CQ 103 Building Works Measurement 1

DEPARTMENT OF CIVIL ENGINEERING

LECTURE PROGRAMME

SYNOPSIS

BUILDING WORKS MEASUREMENT 1 course provides students knowledge on the development and the importance of quantity surveying profession globally. This course emphasizes on the basic principles of quantity measurement, method of recording measurement in the dimension paper and procedures related to standard method of measurement. It also provides students the skills and expertise to practice basic quantity measurement studies.

COURSE LEARNING OUTCOMES (CLO)

1. Explain correctly the steps in preparing the bills of quantity.

2. Measure accurately the quantities for substructure works according to Standard Method of Measurement.

3. Demonstrate professionally and ethically the measurement works in line with quantity surveying professional code of conduct according to Standard Method of Measurement.

ASSESSMENT

The course assessment is carried out in two sections:i. Coursework (CA) - Coursework is continuous assessment that measures knowledge, technical skills and soft skills.

Quiz 3 (20%)Test 2 (40%)50 %Practical Studio 3 (40%)

ii. Final Examination (FE) - Final examination is carried out at the end of the semester. (50%)

COURSE CONTENT

WEEKLECTURE OUTLINE

1Student Registration

2Topic 1: INTRODUCTION TO BUILDING WORKS MEASUREMENTThis topic covers the purpose, form and usage of bill of quantity.

3Topic 1: INTRODUCTION TO BUILDING WORKS MEASUREMENTThis topic covers the purpose, form and usage of bill of quantity.

4Topic 2: INTRODUCTION TO STANDARD METHOD OFMEASUREMENT (SMM)This topic covers the method of preparing bill of quantity which consists both the traditional and present method and basic principles of taking off works.

5Topic 2: INTRODUCTION TO STANDARD METHOD OFMEASUREMENT (SMM)This topic covers the method of preparing bill of quantity which consists both the traditional and present method and basic principles of taking off works.

6

Topic 2: INTRODUCTION TO STANDARD METHOD OFMEASUREMENT (SMM)This topic covers the method of preparing bill of quantity which consists both the traditional and present method and basic principles of taking off works.

7Topic 3: PRELIMINARIES AND PREAMBLEThis topic covers the purpose of preliminaries and preamble.

8Topic 3: PRELIMINARIES AND PREAMBLEThis topic covers the purpose of preliminaries and preamble.

9Topic 4: SUBSTRUCTURE WORKS MEASUREMENTThis topic covers the general requirement, substructure works particulars, method of measurement of substructure works, measurement procedure, worked examples and measurement of substructure works.

10Semester Break








18Revision Week

19Final Examination

20Final Examination

21Semester Break

REFERENCES1. Abdullah, A & Abd Rashid, K [2003]. Pengukuran Kuantiti Bangunan Berdasarkan SMM2.

2. Ashworth, A., Hogg, K., Willis, A. [2002]. WILLISS Practice and Procedure for TheQuantity Surveying 11th Edition. Blackwell Publishing.NCCER (2006). Construction Technology Vol 2. Pearson.

3. Construction Industry Development Board [2003]. Malaysian Standard Method of Measurement for Civil Engineering Works. Kuala Lumpur.

4. Institution Of Surveyors Malaysia [2000]. The Malaysian Standard Method of Measurement of Building Works, Second Edition [SMM 2]. Kuala Lumpur.

5. Seeley, I.H. [2004]. Building Quantities Explained (Building & Surveying 5Rev Edition). Palgrave Macmillan.

6. Willis, J.A., Trench, W., Willis, C.J. [2005]. WILLISS Elements of Quantity Surveying 10th Edition. Blackwell Science.

Prepared byApproved by

.. .

1

Course Outline Cq103

Documents

Transcript of Course Outline Cq103