COUNCIL INFORMATION BOOK - Another Room · 2017. 3. 23. · colors panels are available in 3...

Lamont family Trust T/as Mob 0428 632247

Email: [email protected] Ph/fax 02 44 740393

WEB: www.anotherroom.com.au ABN. 45103119631

COUNCIL INFORMATION BOOK

The information contained within this information package remains the sole intellectual property of Grant Lamont T/AS Another Room. All uses of this information other than in connection with Another Room products is expressly PROHIBITED with out consent of Another Room. Copying of information for consent authority purposes or in connection of sales of Another Room products is permitted. All products interlectual property referenced in these documents remain the sole property of their individual owners / companies and Grant Lamont T/AS Another Room does not take responsibility for any error or in accuracy in technical details provided from said companies.

Lamont family Trust T/as Mob 0428 632247

Email: [email protected] Ph/fax 02 44 740393

WEB: www.anotherroom.com.au ABN. 45103119631

BUILDING SPECIFICATIONS SKID

BUILDING SKID CONSISTS OF TWO HIGH QUALITY GALVANIZED CHANNELS WITH GALVANIZED BOX SECTION FLOORING JOISTS INSTALLED TO AUSTRALIAN BUILDING STANDARD SPACINGS, FULLY WELDED AND CORROSION PROTECTED BRACED FOR STRUCTURAL INTEGRITY, DESIGN FOR STRENGTH, LONG LIFE AND NUMEROUS RELOCATION'S.

FLOOR

FLOOR CONSISTS OF 19 MM THICK GREEN TONGUE PARTICLE FLOOR SHEETS TERMITE TREATED AS USED IN GENERAL HOUSE CONSTRUCTION ( NOT 12 MM PLY AS GENERALLY USED) SCREWED TO FLOOR JOISTS INSTALLED UP INSIDE OF BUILDING PANELS TO GUARANTEE WEATHER PROOFING.

WALLS & CEILING

BUILDING WALLS & CEILING ARE CONSTRUCTED FROM HIGH QUALITY COOL ROOM INSULATION ( EPS) PANELS (UTILIZING BLUE SCOPE 0.6 MM CRP PANEL SKINS) MAXIMIZING THE USE OF THEIR EXCELLENT THERMAL AND NOISE INSULATION PROPERTIES TO CREATE A CONTROLLED ENVIRONMENT. THE EPS PANELS ARE AN AUSTRALIAN MADE PRODUCT MANUFACTURED IN SYDNEY UTILIZING THE BEST TECHNOLOGIES, AUSTRALIAN EXPANDED CFC FREE POLYSTYRENE AND HIGH QUALITY AUSTRALIAN ANTICORROSIVE BLUE SCOPE STEEL COLOR BOND SHEETING DEVELOPED FOR ARDUOUS INDUSTRY CONDITIONS. EPS PANELS ARE FLAME RETARDENT, SELF EXTINGUISHING AND HAVE BEEN TESTED BY CSIRO TO BE LESS TOXIC THAN NORMAL CONSTRUCTION METHODS DURING COMBUSTION. THEY HAVE NO NUTRIENT VALUE AND DO NOT SUPPORT BACTERIAL GROWTH, ATTRACT ANTS, TERMITES OR RODENTS

COLORS

PANELS ARE AVAILABLE IN 3 STANDARD COLORS, 4 NON STANDARD COLORS

STANDARD SURFMIST (OFF WHITE), PALE EUCALYPT (MIST GREEN) & PAPERBARK

(MERINO)

NON STANDARD CLASSIC CREAM, SHALE GREY, DUNE & FASCADE, CITI METALLIC

ROOF

BUILDINGS ARE OVER ROOFED WITH BLUE SCOPE COLOR BOND CORRUGATED ROOFING , FITTED WITH GUTTERS AND DRAINPIPES IN YOUR CHOICE OF COLORS FROM THE AVAILABLE BLUE SCOPE COLOR MATRIX FOR COLOR BOND WITH A 5 DEGREE CONCAVE PITCH.

DOORS & WINDOWS

BUILDINGS FITTED WITH HIGH QUALITY SLIDING WINDOWS AND DOORS INCLUDING SCREENS AVAILABLE IN YOUR CHOICE OF COLOR AS PER COLOR BOND COLORS (OPTIONAL PANEL DOORS AVAILABLE).

FLOORING

AVAILABLE WITH CHOICE OF LINO, CARPET OR CARPET WITH LINO INSERT ALONG WITH OPTION OF INDUSTRIAL LINO.

KITCHENS AVAILABLE WITH CUSTOM MADE KITCHENS AS REQUIRED USING QUALITY FLAT PACK KITS AND CUSTOM MADE BENCH TOPS.

ELECTRIC'S

BUILDING IS ENTIRELY PRE WIRED REQUIRING ONLY SITE CONNECTION BY QUALIFIED ELECTRICIAN INCLUDING SAFETY SWITCHES, 4 DOUBLE POWER POINTS, LIGHTS ETC., PRE WIRED FOR AIR CONDITIONING UNITS AND THEY CAN BE FITTED DURING CONSTRUCTION.

FOOTINGS & WIND RATINGS

ENGINEERED WIND CATEGORY RATING OF CATEGORY 2 (180 KM/HR PLUS (MUST BE INSTALLED AS PER RECOMMENDED FOOTING SPECIFICATIONS)). FOOTING DRAWINGS AND LOCATIONS SUPPLIED

BUILDING BENEFITS MINIMAL INTERRUPTION TO HOME LIFE DURING INSTALLATION EASILY INSTALLED BY ANY COMPETENT PERSON WINDOWS AND DOOR LAYOUT MAY BE LOCATED TO SUIT ALL REQUIREMENTS DUE TO TYPE OF PANEL CONSTRUCTION EASILY REMOVABLE AND RE SALE ABLE SIMPLE ANCHORING DESIGN WEATHER PROOF & ENERGY EFFICIENT EXCELLENT THERMAL AND NOISE PROPERTIES COST EFFECTIVE (PARTICULARLY WITH RESALE VALUE) AESTHETICALLY PLEASING EASILY ADAPTED OR DECORATED TO SUIT ALL TASTES/NEEDS FULLY WIRED REQUIRING A SIMPLE ELECTRICAL CONNECTION EASE OF DELIVERY AND INSTALLATION AS DESIGNED TO TRANSPORT ON TILT TRAYS OR TRUCK AND CRANE AS NECESSARY EXTREMELY LITE CONSIDERING STRENGTH AND SIZE MANUFACTURED USING THE BEST QUALITY PRODUCTS FULL INFORMATION PACKAGE TO ASSIST WITH COUNCIL REQUIREMENTS

POLYSTYRENE CORE BUTT JOINTSThe butt joints between the ends of the polystyrene core material have been made by way of finger jointing pro-viding a mechanical bond across the end faces of the core material.SURFACE PROFILES• The PPI Slip-joint® forms the edges of both skins with a male and female joint to either edge. Panels can be fin-ished flat or with a low profile of 0.75mm depth to either surface: • 100mm profile or • Silkline profile.

PRODUCT DESCRIPTIONPoly Panel Industries’ panels are 1200mm width stressed skin panels manufactured on an insulated panel produc-tion line. • Panel cores are self-extinguishing grade expanded polystyrene Class SL, as supplied by Poly Panel Indus-tries and bonded under pressure to BlueScope Steel Colorbond® pre-painted Galvabond or Zincalume base steel facings (using a two-part polyurethane adhesive). Thickness ranges with the EPS core material from 50 to 300mm in multiples of 25mm to suit thermal or structural requirements (conditions apply). • Panels are available in continuous lengths up to 18 metres (subject to transport facilities), manufactured to order and cut to the specified length.• Steel facings can range in thickness from 0.40mm to 0.60mm for either surface skin.• Standard finish is an oven-cured 25% Gloss level Per-magard™ White in Microban® for antibacterial protec-tion. There are other colours in the Colorbond® range subject to availability.THERMAL PERFORMANCE

SL Grade EPS

Panel Thickness (mm)

R value(m2K/W)

U factor(W/m2K)

50 1.32 0.76

75 1.97 0.51

100 2.63 0.38

150 3.95 0.25

200 5.26 0.19

250 6.58 0.15

300 7.90 0.13

SECTION PROPERTIESSection properties and mass for unit (1000mm) width of panel, together with the recommended maximum design skin stresses have been determined for panels of vary-ing panel thickness and these are shown below.

0.40mm Steel Skin

Thickness (mm)

Section Modulus(mm2)

Maximum Design Skin Stress (MPa)

Weight (kg/m2)

50 21230 65 7.7

75 32020 60 8.1

100 42800 50 8.4

150 64370 42 9.0

0.60mm Steel Skin

Thickness(mm)

SectionModulus(mm2)

MaximumDesign SkinStress (MPa)

Weight(kg/m2)

50 31590 48 10.9

75 47770 48 11.2

100 63940 48 11.6

150 96300 48 12.2

200 128660 48 12.9

250 161020 48 13.6

300 193380 48 14.4

POLY PANELEPS Core Insulated Panel

SPECIFICATIONS AT A GLANCECorePanel cores are fi re-resistant XFlam™ based on syntactic technol-ogy. XFlam™ comprises a composite blend of specifi c phenolic resins and various fi lling materials, manufactured to Australian standards. Steel skins are bonded to the core under pressure using a two-part thermosetting polyurethane adhesive.SkinsSheet thickness can range from 0.40mm to 0.60mm for either surface skin. Panel skins are available with a choice of steel:• Colorbond® Permagard™ steel, incorporating Microban® antibacterial technology in its coating to provide durable, food-safe performance that will not wash off . This steel is available in Permagard™ White only.• Colorbond® standard grade steel comes in a wide range of designer colours.• There are other skin materials available on request, including Stainless Steel, Aluminium and Printech™ printed steel.ColourThe many colours available in Colorbond® range from traditional to modern. For Prestige Applications there is Colorbond® Metalic steel.Generally, the lighter colours are preferred for EPS panel used externally, because they refl ect solar radiation. The various surfaces and colour choice can infl uence the price per square metre - our sales staff will gladly assist you in your selection.Dimensions• Width: 1200mm as a modular standard.• Thickness: 50 to 250mm in multiples of 25mm.• Length: Cut to order, a minimum length 1000mm to a maximum of 22000mm.Profi lesAvailable with a fl at surface fi nish or low profi le of 0.75mm depth to either surface: 100mm Rib profi le, 50mm Mesa Rib and Silkline.The Austral Slip-joint® is incorporated into the edges of both surface skins for easy installation.

THERMAL PERFORMANCE (XFlam™ core )

Panel Thickness (mm)

R value(m2K/W)

Weight(kg/m2)

50 1.61 12.7

75 2.42 13.7

100 3.23 14.6

150 4.84 16.5

200 6.45 18.4

250 8.06 20.3

Austral Insulation panel on display:Some of the various applications

for Austral Insulation laminated insulated panel are illustrated above:Residential dwellings, Public buildings and Refrigerated storage facilities.

Orders for panelAll panels are manufactured to order. Wall panel can be supplied with rebate ends for support to the ceiling or mitre edge for corner joints. Ceiling panel is square cut. Orders should state your requirements, including preferred colours and profi le.

63489 PPI EPS Core Tech.indd 1 18/05/09 3:47 PM

EXPANDED POLYSTYRENE PANELSDENSITY - NOMINAL 13.5kg/m3

(0.40mm Steel Skin - 100mm Rib Profile)

MAXIMUM DESIGN UNIFORM LOADS FOR SINGLE SPAN PANELS

NOMINAL

PANEL

THICKNESS

50

75

100

150

SAFE UNIFORM LOADS kN/m2 (Self Load has been deducted)

Single Span - Length in metres

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0

1.38 1.10 0.92 0.79 0.69 0.55 0.44 0.36 0.31 0.26 0.23 0.20 - -

1.92 1.54 1.28 1.10 0.96 0.76 0.61 0.51 0.43 0.36 0.31 0.27 0.24 -

2.14 1.71 1.43 1.22 1.07 0.85 0.68 0.57 0.48 0.41 0.35 0.30 0.27 0.21

2.70 2.16 1.80 1.54 1.35 1.07 0.87 0.71 0.60 0.51 0.44 0.38 0.34 0.27

EXPANDED POLYSTYRENE PANELSDENSITY - NOMINAL 13.5kg/m3

(0.60mm Steel Skin - 100mm Rib Profile)

MAXIMUM DESIGN UNIFORM LOADS FOR SINGLE SPAN PANELS

NOMINAL

PANEL

THICKNESS

50

75

100

150

200

250

300

SAFE UNIFORM LOADS kN/m2 (Self Load has been deducted)

Single Span - Length in metres

2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 9.0

1.71 1.36 1.14 0.97 0.76 0.60 0.49 0.40 0.34 0.29 0.25 0.22 0.19 0.15

2.58 2.06 1.72 1.47 1.15 0.91 0.73 0.61 0.51 0.43 0.37 0.33 0.29 0.23

3.45 2.76 2.30 1.97 1.53 1.21 0.98 0.81 0.68 0.58 0.50 0.44 0.38 0.30

5.20 4.16 3.47 2.97 2.31 1.83 1.48 1.22 1.03 0.88 0.75 0.66 0.58 0.46

6.95 5.56 4.63 3.97 3.09 2.44 1.98 1.63 1.37 1.17 1.01 0.88 0.77 0.61

8.70 6.96 5.80 4.97 3.86 3.05 2.47 2.04 1.72 1.46 1.26 1.10 0.97 0.76

10.44 8.35 6.96 5.97 4.64 3.67 2.97 2.45 2.06 1.76 1.52 1.32 1.16 0.92

Notes 1) The tabulated safe loads are recommended unfactored maximum nett loads. (In the assessment of the design loads, the designer should take into account the self weight of the panel). 2) Compliance with these recommendations will ensure that deflections do not exceed span/90. Where more severe deflection restrictions are required, specific testing of deflection characteristics is recom mended for the various span/thickness combinations. 3) A minimum design load of 0.5kN/m2 is recommended for general applications. Circumstances may require different design loading. 4) Where panels are continuous across a support, it is recommended that stress cuts be made across the inside (or cold side) steel skin adjacent to the supports to prevent buckling of the outer (warm side) skin at the support. Fixings should be provided on both sides of the stress cut. 5) The finger joints at the butt joints of the polystyrene core material occur every 5 metres. These provide a mechanical bond between the polystyrene core sheets. Adhesive bonding is not required.

Produced May 2009

POLY PANELEPS Core Insulated Panel

63489 PPI EPS Core Tech.indd 2 18/05/09 3:47 PM

1 of 2

GENERAL DESCRIPTION

COLORBOND® Insulation Panel steel, designedby BlueScope Steel Limited, specifically for themanufacture of sandwich panels for coolrooms.The product offers excellent formability coupledwith good durability.

TYPICAL USESCoolroom panels.

AUSTRALIAN STANDARDSubstrate – AS 1397Paint Coating – AS/NZS 2728:1997 Type 3

PREFERRED SUBSTRATES ZINCFORM® G300 Z275 BFC steel

Please refer to current price list or BlueScope Steel Limited State Sales Office for availability of colours and dimensions.

Only light colours are available. Colour in the ‘L’ scale is greater than 50. The product is supplied with a nominal 25%(60º) gloss.

Protective film (CORSTRIP®) should be removed from the painted steel strip immediately on installation. Sunlight canincrease the adhesion of the protective film to the painted surface if left uncovered outside. Refer to brochure ‘The smartway to design, install and maintain COLORBOND® steel’.

LINE TESTED PROPERTIESProperty Measured By Test Method Results

Hardness Pencil AS/NZS 1580 405.1 HB or harderNCCA Tech. Bull. 4.2.5

Adhesion Reverse Impact AS/NZS 2728 (App. E) ≥10 joulesNCCA Tech. Bull. 4.2.6

T - bend AS/NZS 2728 (App. F) Maximum 6TNCCA Tech. Bull. 4.2.8

Specular gloss 60º meter AS/NZS 1580 602.2 15 - 35%ASTM D523

EXPECTED PRODUCT SERVICE PERFORMANCEProperty Measured After Test Method Results

Resistance to colour change QUV (2000 hours) ASTM G53 ∆ E Hunterlab:Light colour: ≤6 units

Natural well washed ASTM D2244 ∆ E Hunterlab:exposure (10 years) Light colour: ≤6 units

Resistance to chalking QUV (1000 hours) ASTM G53 Rating: ≤4AS/NZS 1580 481.1.11(Method B)

Natural well washed AS/NZS 1580 481.1.11 Chalk rating: ≤4exposure (10 years) (Method B)

Resistance to corrosion Salt spray (500 hours) ASTM B117 Blister density: ≤2AS 2331.3.1 Blister size: ≤S2NCCA Tech. Bull. 5.4.6 Undercut from a score: ≤2mmAS/NZ 2728 (App. H3) No loss of adhesion

Kesternich (SO2) DIN 50018 Edge creep: <4mm(50 cycles) Blisters: nil

Resistance to humidity Cleveland (1000 hours) NCCA Tech. Bull. 5.4.5 Blister density: ≤2Blister size: ≤S2No loss of adhesion

Resistance to acids Exposure ASTM D1308 No discolouration(3.1.1) No blistering

Protective Film may be available on requestFinish Coat (Nominal 20µm)Universal Corrosion Inhibitive Primer (Nominal 5µm)Conversion Coating

Galvanized Steel Substrate

Conversion CoatingUniversal Corrosion Inhibitive Primer (Nominal 5µm)Backing Coat (Custom Formulated Foam Grey, Nominal 5µm)

COLORBOND® InsulationPanel steel

Designed for: Coolroom Panels

Revision 6, November 2003This literature supersedes all previous issues

2 of 2

EXPECTED PRODUCT SERVICE PERFORMANCE (Cont.)Property Measured After Test Method Results

Resistance to solvents Exposure ASTM D1308 No discolouration(3.1.1) No blistering

Adhesion Natural well washed – No flaking or peelingexposure (10 years)

Resistance to fire Exposure AS/NZS 1530.3 Ignitability index:0 rating in scale of 0 -20Spread of flame index:0 rating in scale of 0 -10Heat evolved index:0 rating in scale of 0 -10Smoke evolved index:0 -1 rating in scale of 0 -10

Flexibility T - bend AS 2935 (App. E) Maximum 8T (no cracking)NCCA Tech. Bull. 4.2.8

Resistance to abrasion Taber Abraser – 1000g AS/NZS 1580 403.2 ≤20mg per 100 cyclesCS 10 wheels NCCA Tech. Bull. 4.2.5

Scratch AS/NZS 1580 Typically 2000g

NOTE

➀ Values quoted are for standard colours of COLORBOND® Insulation Panel steel under normal well washed conditions of exposure.

➁ Product may not be suitable if it is intended to use COLORBOND® Insulation Panel steel in an exterior application within1km of salt marine locations, severe industrial or abnormally corrosive environments, areas not washed by rain, or inapplications where it will be wholly or partly buried in the ground. Before purchase, you should check on suitabilitythrough contacting your nearest BlueScope Steel Limited Sales office for advice.

➂ COLORBOND® Insulation Panel steel has good resistance to accidental spillage of solvents such as methylated spirits,white spirit, mineral turpentine, toluene, trichloroethylene and dilute mineral acids and alkalis. However, all spillagesshould be immediately removed by water washing and drying.

➃ For most products, the metallurgical ageing process which is inherent in the paint stoving cycle will result in some loss ofductility compared with unpainted product. However, minimum strength levels designated by relevant standards will stillbe applicable.

➄ Improper storage or the use of non-approved roll-forming lubricants may adversely affect colour. Material which becomeswet while in stacks or bundles must be separated and dried (refer AS/NZS 2728 Appendix K).

➅ Customers should use product promptly (within 6 months) to avoid the possibility of storage related corrosion and aphenomena of galvanized coatings termed intergranular corrosion.

COLORBOND®, ZINCALUME® and CORSTRIP® are registered trade marks of BlueScope Steel Limited.

BlueScope is a trade mark of BlueScope Steel Limted.

Please ensure you have the current data sheet for this product as displayed at www.bluescopesteel.com.au

BlueScope Steel LimitedBlueScope Steel Limited ABN 16 000 011 058 Copyright © 2003 BlueScope Steel LimitedBlueScope Steel (AIS) Pty Ltd ABN 19 000 019 625

SYDNEY: (02) 9795 6700 MELBOURNE: (03) 9586 2222 BRISBANE: (07) 3845 9300 ADELAIDE: (08) 8243 7333 PERTH: (09) 9330 0666

Produced by Artimprint (02) 9984 8586

COLORBOND® InsulationPanel steel

Designed for: Coolroom Panels

ContinuedRevision 6, November 2003This literature supersedes all previous issues

1 of 2

PREFERRED SUBSTRATES ZINCALUME® G550S AZ150 steelZINCALUME® G300S AZ150 steel

Please refer to current price list or BlueScope Steel Limited State Sales Office for availability of colours and dimensions.

The finish coat can, if required, be applied to both sides to provide a ‘double sided’ product. The product is supplied witha nominal 25% (60º) gloss.

The protective film (CORSTRIP®) should be removed from the painted steel strip immediately on installation. Sunlight canincrease adhesion of the protective film to the painted surface if left uncovered outside. Refer to brochure ‘ The smartway to design, install and maintain COLORBOND® steel .’

LINE TESTED PROPERTIESProperty Measured By Test Method Results

Hardness Pencil AS/NZS 1580 405.1 HB or harderNCCA Tech. Bull. 4.2.5

Adhesion Reverse Impact AS/NZS 2728 (App. E) ≥10 joulesNCCA Tech. Bull. 4.2.6

T - bend AS/NZS 2728 (App. F) Maximum 5TNCCA Tech. Bull. 4.2.8

Specular gloss 60º meter AS/NZS 1580 602.2 15 - 35%ASTM D523

EXPECTED PRODUCT SERVICE PERFORMANCEProperty Measured After Test Method Results

Resistance to colour change QUV (2000 hours) ASTM G53 ∆ E Hunterlab:Intermediate colour:≤5 unit, eg Wheat

Natural well washed ASTM D2244 ∆ E Hunterlab:exposure (15 years) Light colour: ≤6 units

Int. colour: ≤9 unitsDark colour: ≤15 units

Resistance to chalking QUV (2000 hours) ASTM G53 Rating: ≤4AS/NZS 1580 481.1.11(Method B)

Natural well washed AS/NZS 1580 481.1.11 Chalk rating: ≤4exposure (10 years) (Method B)

Resistance to corrosion Salt spray (1000 hours) ASTM B117 Blister density: ≤2AS 2331.3.1 Blister size: ≤S2NCCA Tech. Bull. 5.4.6 Undercut from a score: ≤2mm

No loss of adhesion

Kesternich (SO2) DIN 50018 Edge creep: <4mm(50 cycles)

Resistance to humidity Cleveland (1000 hours) NCCA Tech. Bull. 5.4.5 Blister density: ≤2Blister size: ≤S2No loss of adhesion

Resistance to acids Exposure ASTM D1308 No discolouration(3.1.1) No blistering

GENERAL DESCRIPTION

COLORBOND® prepainted steel, specifically designed by BlueScope SteelLimited to provide a high durability,premier cladding and roofing materialfor general use.

GENERAL DESCRIPTION

Roofing and accessories, wall cladding, rain water goods.

AUSTRALIAN STANDARDSubstrate – AS 1397Paint Coating – AS/NZS 2728:1997 Type 3-4

Protective Film may be available on requestFinish Coat (Nominal 20µm)Universal Corrosion Inhibitive Primer (Nominal 5µm)Conversion Coating

Conversion CoatingUniversal Corrosion Inhibitive Primer (Nominal 5µm)Backing Coat (Shadow Grey, Nominal 5µm)

ZINCALUME® - Zinc/Aluminium Alloy Coated Steel Substrate

COLORBOND® steelDesigned for: Exterior Roofing

and Walling

Revision 7, November 2003This literature supersedes all previous issues

2 of 2

Property Measured After Test Method Results

Resistance to alkalis Exposure ASTM D1308 No discolouration(3.1.1) No blistering

Resistance to solvents Exposure ASTM D1308 No discolouration(3.1.1) No blistering

Adhesion Natural well washed – No flaking or peelingexposure (15 years)

Resistance to heat Exposure ASTM D2244 Colour change 100ºC continuous ∆ E Hunterlab: ≤3 units

Resistance to fire Exposure AS/NZS 1530.3 Ignitability index:0 rating in scale of 0 - 20Spread of flame index:0 rating in scale of 0 - 10Heat evolved index:0 rating in scale of 0 - 10Smoke evolved index:0 - 1 rating in scale of 0 - 10

Flexibility T - bend AS 2935 (App. E) Maximum 7T (no cracking)NCCA Tech. Bull. 4.2.8

Resistance to abrasion Taber Abraser - 1000g AS/NZS 1580 403.2 ≤20mg per 100 cyclesCS 10 wheels NCCA Tech. Bull. 4.2.5

Scratch AS/NZS 1580 403.1 Typically 2000g

NOTE

➀ For selection of the most appropriate COLORBOND® steel product refer to ‘Steel Roofing Products – Selection Guide TechnicalBulletin TB - 1a’, and ‘Steel Walling Products – Selection Guide Technical Bulletin TB - 1b’.

➁ Values quoted are for standard colours of COLORBOND® steel under normal well washed conditions of exposure. Product may notbe suitable if it is intended to use COLORBOND® steel in an exterior application within 1km of salt marine locations, severe industrialor abnormally corrosive environments, or in applications where it will be wholly or partly buried in the ground. Before purchase,you should check on suitability through contacting your nearest BlueScope Steel Limited Sales office for advice.

➂ COLORBOND® steel has good resistance to accidental spillage of solvents such as methylated spirits, white spirit, mineralturpentine, toluene, trichloroethylene and dilute mineral acids and alkalis. However, all spillages should be immediately removed bywater washing and drying.

➃ For most products, the metallurgical ageing process which is inherent in the paint stoving cycle will result in some loss of ductilitycompared with unpainted product. However, minimum strength levels designated by relevant standards will still be applicable.

➄ Improper storage or the use of non-approved roll-forming lubricants may adversely affect colour. Material which becomes wet whilein stacks or bundles must be separated and dried (refer AS/NZS 2728 Appendix K).

➅ The Backing coat is not recommended for exposure to direct sunlight. Where the reverse side will be exposed to direct sunlight, the“double sided” product is recommended.

➆ Definitions• Finish coat - the coating applied to the exposed surface of the prepainted coil or sheet which is expected

to meet the Performance Requirements.• Backing coat - a thin (pigmented or clear) coating applied to the reverse or unexposed surface of the

prepainted coil or sheet for the purpose of protection against damage to the topcoat duringshipment and storage. It also gives additional durability to the reverse or unexposed surfaceduring the service life of the product. Performance Requirements are not generally applicable toBacking coats. Where specific Performance Requirements are deemed necessary for the reversesurface coating “double sided” product should be specified, in which case a topcoat of fullnominal thickness will be applied.

EXPECTED PRODUCT SERVICE PERFORMANCE (cont.)

COLORBOND®, ZINCALUME® and CORSTRIP® are registered trade marks of BlueScope Steel Limited.

BlueScope is a trade mark of BlueScope Steel Limted.

Please ensure you have the current data sheet for this product as displayed at www.bluescopesteel.com.au

BlueScope Steel LimitedBlueScope Steel Limited ABN 16 000 011 058 Copyright © 2003 BlueScope Steel LimitedBlueScope Steel (AIS) Pty Ltd ABN 19 000 019 625

SYDNEY: (02) 9795 6700 MELBOURNE: (03) 9586 2222 BRISBANE: (07) 3845 9300 ADELAIDE: (08) 8243 7333 PERTH: (09) 9330 0666

Produced by Artimprint (02) 9984 8586

COLORBOND® steelDesigned for: Exterior Roofing

and Walling

ContinuedRevision 7, November 2003This literature supersedes all previous issues

SCALE DRAWN BY SHEET OF

DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER

PO BOX 647 MORUYA, NSW 2537

AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

70 * 40 mm angle

frame 40 * 40 * 2.5 mm RHS

SPREADER 40 * 40 *2.5 RHS

DOOR OPENING

CUT AS REQUIRED

FRAME

WELDED TO FRAME

COLORBOND CORRUGATED

SEE TYPICAL SKID DWG FOR DETAILS OF SKID

PITCH APPROX 5 DEGREES

PORTABLE PANEL BUILDINGS

TYPICAL ASSEMBLY DWG

QUAD GUTTER FULL LENGTH EACH SIDE

DOWN PIPES AT END OPP DOOR

40 * 40 ANGLE OR R50 MM COVING

POP RIVETED TO RAIL

5/32 * 3/8 RIVETSUNDER FLOOR INSULATION AS REQUIRED

EPS WALL PANEL 75 MM r1.9

BATTERNS AS REQUIRED DEPENDANT ON BUILDING WIDTH

75 mm wall

panels secured 300 mm spacings inside & out 5/32 rivets

40 * 40 * 1.6 mm Angle

F3

MAX SPAN BETWEEN PIERS 2.7 MTRS

0.42 BMT @ 900 C/C MAX

site buildings up to 3 mtrs 50 mm eps wall and 75 mm eps roof

site building 3.6 mtr 50 mm eps wall and 100 mm eps roof

alpine buildings up to 3.6 mtrs wide 75 mm eps wall and 100 mm eps roof

alpine buildings up to 4.5 mtrs wide 75 mm eps wall and 150 mm eps roof

Max altitude = 930 mtrs snow load 1.5 kpa ult.

75

mm

ep

s m

ax h

eig

ht

3.0

mtr

50

mm

ep

s m

ax h

eig

ht

to c

eili

ng

2.5

mtr

s

all specs are minimum sizes

6060t5

0100

150 * 50 * 3 RHS GAL

22MM GREEN TOUNGUE FLOOR OFFICES / COMMERCIAL

75 * 75 * 4 GAL ANGLE

Structural design for category 2 to AS 1170.2, 50 m/sec ultimate.

N3 wind rating to AS 4055

19 MM GREEN TOUNGUE SCREWED FLOOR DOMESTIC

REV 1

sheltered location to AS 1170.3

COMMERCIAL / OFFICES FLOOR JOISTS 50 * 50 * 3MM RHS.

DOMESTIC FRAME FLOOR JOISTS 40 * 40 * 2.5 RHS @ 450 C/C

6060T5

ALL CONSTRUCTION TO BUILDING CODES OF AUSTRALIA.

12/5/11


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER


AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

FRAME

WELDED TO FRAME


TYPICAL ASSEMBLY DWG

40 * 40 ANGLE

POP RIVETED TO RAIL

5/32 * 3/8 RIVETS

UNDER FLOOR INSULATION AS REQUIRED

EPS WALL PANEL 75 MM r1.9

12/4/101

70 * 40 * 1.6 ALL ANGLE

5/32 RIVETS

SILICON SEAL

50 / 75 MM EPS

50 MM ALL COVE

RIVETS EVERY 600 MM

300 MM SPACINGS

WALL

5 DEGREE PITCH CORRI ROOF

TYPICAL FLOOR JOINT

TYPICAL WALL JOINT 1

5/32 RIVETS

50 / 75 MM EPS

RIVETS EVERY 600 MM

300 MM SPACINGS

5 DEGREE PITCH CORRI ROOF

300 MM EVE

40 * 40 * 1.6 ANGLE

75 * 30 * 2.5 CAPPING

5/32 RIVETS

200 MM SPACINGS

TYPICAL WALL JOINT 2 WITH EVES

50 MM ALUMINUM COVING

75 * 75 * 4 GAL ANGLE

POPRIVETS AT 300 MM SPACINGS AROUND BASE UNIT

H/D ALLUMINIMUM

BASE CHANNEL

AROUND ALL EXPOSED EDGES

19 MM GREEN TOUNGUE TERMI FLOOR SCREWED DOMESTIC LOADING

22MM GREEN TOUNGUE TERMI FLOOR SCREWED OFFICE / COMMERCIAL


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GLAS BUILT

CLIENT:MANUFACTURER


ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

TYPICAL SPILT UNIT CONFIGURATION

EPS Skinned Foam Panel EPS Skinned Foam Panel

6 mm hex head bolts and nuts

CEILING TYPICAL LAYOUT CONNECTION

ROOF SHEET

RIDGE CAP

10.8 MTR

4 MTRS

6 & 7.2 MTR

8.4, 9.6 MTR

12 MTR

SPAN

C15015

PURLIN PFC BRIDGED

X

X

X

X

180

C20024

C30024

C35030 250

250 X

2 ROWS

BRIDGING

150

150

ROOF SUPPORT BEAM SPAN TABLE

*NOTE* CONFIGURATION TO ACHIEVE NECESSARY LOADINGS

16/6/11

0135

SPAN TABLE REQUIRES THE USE OF 2 BEAMS IN BACK 2 BACK

SPAN RATINGS AS SUPPLIED J.SKURR ENGINEERING. WIND LOAD CAT 2 TO AS1170, N3 TO AS1684


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GLAS BUILT

CLIENT:MANUFACTURER


ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

besa block footingsbesa block footings besa block footings besa block footings

base skid details refer typical drawingsbase skid details refer typical drawings

75 mm hanger

75 mm crp ceiling & R2.5 insul blanket300 mm evesPurlin supporting beams as required

details to be provided BY John skurr engineering Canberra

colorbond roof. 5 degree corri or 3 degree 760 profile as required

40 * 40 * 2.5 RHS Galvanised

75 * 75 rhs supporting columns or similar

details as specified j. skurr engineering.

19mm H2 termi floor & R1.5 insul blanket

2400 mm

100 mm walls eps R2.4

BUILDING WIDTH PLUS EVES BUILDING WIDTH PLUS EVES

150 * 50 * 3 RHS GAL

DISTANCE AS REQUIRED

TYPICAL SPLIT UNIT ASSEMBLY

0136

16/6/11

FOOTING DETAILS AS PER STANDARD FOOTOING DWGS * 2 SET TO SUIT BUILD WIDTH

ROOF SUPPORT BEAM SPAN TABLE

SPAN PURLIN BRIDGED2 ROWS

BRIDGINGPFC

4 MTRS

6 & 7.2

8.4, 9.6

12 MTR

C15015

C20024

C30024

10.8 MTR C35030

250

250

180

150

150 X

X

X

X

X

*NOTE*SPAN TABLE REQUIRES THE USE OF 2 BEAMS IN BACK 2 BACK

CONFIGURATION TO ACHIEVE NECCESARY LOADINGS

commercial 22 mm floor, 50 mm rhs floor joist

SPAN RATINGS AS SUPPLIED, WIND CAT 2 AS1170, N3 AS1684


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER


AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

SIGNATURE DATE

SALES SIGNATURE

CLIENT NAME:

BUILDING SIZE

SCOLORBOND CORRI ROOF 5 DEGREE CONCAVE PITCH

DOWN PIPE

GUTTER

2900 mm

from bottom of skid

internal height 2420 mm

1000 h * 1500 wide window

1000

12 mtrs

450 mm to sub floor

900 mm

ac outdoor unit

Tony & Sheila

12 * 4.2 mtr unit

nth side elevation

27/3/10

exhaust fan


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER


AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

SIGNATURE DATE

SALES SIGNATURE

CLIENT NAME:

BUILDING SIZE

SCOLORBOND CORRI ROOF 5 DEGREE CONCAVE PITCH

DOWN PIPE

GUTTER

internal height 2420 mm

1000 h * 1500 wide window

1000

12 mtrs

450 mm to sub floor

900 mm

Tony & Sheila

12 * 4.2 mtr unit

27/3/10

2100h * 1800 wide slding glass door

sth side elevation

3200 mm aprox


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER


AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

SIGNATURE DATE

SALES SIGNATURE

CLIENT NAME:

BUILDING SIZE

GUTTER

450 mm to sub floor

900 mm

Tony & Sheila

12 * 4.2 mtr unit

27/3/10

2100h * 1800 wide slding glass door

colourbond corrigated concave roof 5 degree pitch

internal 75 mm insulation blanket R2.5

GUTTER

125 mm125 mm

d/pipes 100/50

ac out door unit

ac indoor head unit

west ( house ) side elevation

4.2 mtrs wide ( overall to gutter 4.5 mtrs)

WALLS 75 MM EPS R1.9 CEILING 100 MM EPS R2.63


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER


AS BUILT

CLIENT:

ANOTHER ROOM P/L

PH/FAX 02 44 740393 MOBILE 0428 632 247

SIGNATURE DATE

SALES SIGNATURE

CLIENT NAME:

BUILDING SIZE

GUTTER

900 mm

Tony & Sheila

12 * 4.2 mtr unit

27/3/10

colourbond corrigated concave roof 5 degree pitch

internal 75 mm insulation blanket R2.5

GUTTER

125 mm125 mm

d/pipes 100/50

ac out door unit

4.2 mtrs wide ( overall to gutter 4.5 mtrs)

800 mm pa door

600 * 600 frosted window

2040 high

300 mm

east side elevation.

WALL 75 MM EPS R1.9 CEILING 100 MM EPS R 2.63


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GLAS BUILT

CLIENT:

40 * 40 MM SPREADER 3 OFF

40 MM SPREADER

40 MM CENTRE UPRIGHT FLOOR SUPPORT

40 MM SPREADER40 MM SPREADER

MATERIALS

SKID RAILS

SPREADER RAILS BOTTOM SKID

SKID DETAIL ENDS

MAY VARY NUMBER OF SPREADERS DEPENDENT BUILD SIZE

ALL CONTACT POINTS

ANCHOR POINTANCHOR POINT

ANCHOR POINT ANCHOR POINT

40 * 40 * 2.5 MM GAL RHS


TYPICAL SKID DWG.ANOTHER ROOM

P.O BOX 647 MORUYA NSW 2537

PH/FAX 02 44 740393 MOBILE 0428 632247

AROUND BUILDING PERIMETER WTITH 40 MM RETAING ALLUMINUM ANGLE

40 * 40 * 1.6

FLOOR JOIST SPACING 450 MM CENTRES

50

50

32 MM DIA HOLE

75 * 75 MM * 3 RHS LIFTING POINTS

1800 M

M

75 * 75 * 4 GAL ANGLE WELDED TO 40 MM FLOOR JOISTS AROUND FULL EDGE BUILDING

75 * 75 * 4 GAL ANGLE WELDED TO 40 MM FLOOR JOISTS AROUND FULL EDGE BUILDING

40 * 40 * 2.5 RHS

EVERY 2ND FLOOR JOISTWHEN BUILD EXCEEDS 3 MTRS

50 * 50 * 3 GAL ANGLE WELDED TO 40 MM FLOOR JOISTS FOR SITE SHEDS

150 * 50 * 3 RHS GAL RAILS CANTILEVER BRACKETS

FLOOR JOISTS

40 * 40 * 2.5 GAL SHS DOMESTIC

150 * 50 * 3 GAL RHS RAILS

FLOOR JOISTS LENGTH 2.4 MTR BUILD

(2240mm, o/hang 220 mm from rails)

FLOOR JOISTS LENGTH 3 MTR BUILD(2840 mm, o/hang 520 mm from rails)

FLOOR JOISTS LENGTH 3.6 MTR BUILD(3440 mm, o/hang 820 mm, cantaliver brackets)

(every second joist as required)

WIDE

FLOORING 19 MM GREEN TOUNGUE TERMI FLOOR PARTICLE BOARD DOMESTIC LOADING

22MM GREEN TOUNGUE TERMI FLOOR PARTICLE BOARD OFFICE LOADING

4/5/11

0102

REV 2

50 * 50 * 3 Gal OFFICES / COMMERCIAL

ALL CONSTRUCTION TO BUILDING CODES OF AUSTRALIA


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GLAS BUILT

CLIENT:

MATERIALS

SKID RAILS

SPREADER RAILS BOTTOM SKID

SKID DETAIL ENDS

MAY VARY NUMBER OF SPREADERS DEPENDENT BUILD SIZE

ALL CONTACT POINTS

40 * 40 * 2.5 MM GAL RHS


TYPICAL SKID DWG.ANOTHER ROOM


PH/FAX 02 44 740393 MOBILE 0428 632247

AROUND BUILDING PERIMETER WTITH 40 MM RETAING ALLUMINUM ANGLE

40 * 40 * 1.6

FLOOR JOIST SPACING 450 MM CENTRES

50

50

32 MM DIA HOLE

75 * 75 MM * 3 RHS LIFTING POINTS

SPREADER1800

75 * 75 * 3 BRACES AND LIFT POINTS

200

200

75 * 75 * 4 GAL ANGLE WELDED TO 40 MM FLOOR JOISTS

75 * 75 * 4 GAL ANGLE WELDED TO 40 MM FLOOR JOISTS

(350)

(350)

4.2 / 4.5 SKID

HANGER 75 * 75 * 4 GAL ANGLE



( 4000 MM LONG, 200 MM OVER HANG)

(4300 MM LONG WITH 350 MM O/HANG)

75 * 75 * 3 BRACES AND LIFT POINTS

75 * 75 * 3 RHS GAL SPREADERS

MAXIUMUM DISTANCE APART 3 MTRS C/C



LIFT POINTS SEAM WELDED AND BRACED

TO FLOOR JOISTS, WELD TO ANGLE

75 * 75 * 3 LIFT POINTS

00039

150 * 50 * 3 RHS GAL

DOMESTIC

50 * 50 * 3 RHS GAL OFFICE /COMMERCIAL

150 * 50 * 3 SHS GAL RAILS

1800

FLOOR JOIST

FLOORING 19 MM GREEN TOUNGUE TERMI FLOOR PARTICLE BOARD DOMESTIC LOADING

22 MM GREEN TOUNGUE TERMI FLOOR PARTICLE BOARD OFFICE LOADING

4/5/11

REV 1

ALL CONSTRUCTION TO BUILDING CODES OF AUSTTRALIA


DATE CHCKD JOB No

DWG No

TITLE

PROJECT

N.T.S G.L

GL

MANUFACTURER

AS BUILT

CLIENT:

600

PP

PP

PP

PP

LS

J BOX POWER ENTRY

20 MM CONDUIT

HALF SADDLE MOUNT TO SKID

LIGHT CIRCUIT RUN UP CORNER

ACCROSS WALL CRACK

DOWN TO SWITCHES, OUT TO BULK HEAD UP TO LIGHTS

BULK HEAD LIGHT

270 MM IN FROM DOOR CUT

340 MM TO CENTRE FROM ROOF

HOLE DRILL 280 FROM ROOF, 330 FROM DOOR CUT

130 H TO BOTTOM

180 IN FROM EDGE TO SIDE

SWITCHBOARD 60 MM IN FROM CORNER

1650 HIGH TO CENTRE

ALL CABLES UP CORNER

***NOTES***

25 MM HOLES IN GAL HANGER WITH BUSHES AT ALL PPOINTS AND IN MAIN CORNER

SWITCHBOARD AND ALL PPOINTS 50 MM HOLE & BUSH 225 TO CENTRE ( 5 BUSHES REQUIRED)

AIRCON CIRCUIT RUN TO POWER POINT POS 2

1

2AC1 3

4

EARTH 6 MM SKID TO J BOX AND BOARD

CONDUIT THROUGH ROOF AT LIGHT FITTINGS ( OR BUSHS)

MATERIALS

3 MTRS 6MM 2 C & E

35 NTRS 2.5 MM 2C & E

12 MTRS 1.5 MM 2C & E

2 OFF BATTER HOLDERS

1 OFF 3 GANG PLATE & 2 MECHS

1 OFF DIMMER

5 OFF SLIM LINE MOUNT BLOCKS 14MM

5 OFF 50 MM BUSHES

12 OFF 25 MM BUSHES

1 OFF 100 * 100 J BOX

8 MTRS CONDUIT20 MM

25 CONDUIT HALF SADDLES

12 POLE BOARD

1 32 AMP RCD/MCB

1 16 AMP CB

1 10 AMP CB

4 DOUBLE GPO,S

1 BULK HEAD LIGHT FIT.

3 MTRS 6 MM EARTH

FLOORING 20 MM GREEN TONGUE

START FROM DOOR END & SIDE


PH/FAX 02 44 740393 MOBILE 0428 632247

ANOTHER ROOM

LIGHT SWITCH 1300 MM ABOVE FLLOR POSISTIONED NEST TO OPENING SIDE DOOR FRAME


TYPICAL ELECTRICAL LAYOUT

COUNCIL INFORMATION BOOK - Another Room · 2017. 3. 23. · colors panels are available in 3...

Documents

Transcript of COUNCIL INFORMATION BOOK - Another Room · 2017. 3. 23. · colors panels are available in 3...