CORRUGATED POLYCARBONATE SHEET FOR STADIA · CORRUGATED POLYCARBONATE SHEET FOR STADIA The benefi...
2
www.brettmartin.com Plastic Sheets CONSTRUCTION APPLICATIONS CORRUGATED POLYCARBONATE SHEET FOR STADIA The benefits of natural daylight within any building are well understood and are equally important for the open environment of a stadium. By incorporating Marlon CS Longlife corrugated polycarbonate sheet into the design of a stadium spectators are protected from the elements while still enjoying a well lit, pleasant viewing environment. Less shading maximises grass growth creating a good quality pitch and the designer has the freedom to create a breathtaking architectural statement • Thicknesses: 0.8mm-2.0mm • Tints: Clear, Bronze, Opal • Specials: Special transparent, translucent and opaque options including Green, Blue and Heatguard are available on request • Protective Coatings: Double sided UV protection, IR Heat Block, Condensation Control* *Available on selected profiles. Details available on request. OPTIONS • Stadia rooflights and sidelights APPLICATIONS MAIN BENEFITS • Excellent Light transmission • Encourages grass growth for a high quality pitch • Creates a pleasant environment for spectators • 200 times stronger than glass • High optical clarity • Damage and impact resistant • Performs well in extreme temperatures • Light in weight, easily handled and installed • Weatherable Longlife UV Protection • 10 year Light transmission warranty • 3 year weather breakage warranty • Excellent fire performance • Match any metal roof profile
Transcript of CORRUGATED POLYCARBONATE SHEET FOR STADIA · CORRUGATED POLYCARBONATE SHEET FOR STADIA The benefi...
www.brettmartin.com
Plastic Sheets
CONSTRUCTION
APPLICATIONS
CORRUGATED POLYCARBONATE SHEET FOR STADIA
The benefi ts of natural daylight within any building are well understood and are equally important for the open environment of a stadium. By incorporating Marlon CS Longlife corrugated polycarbonate sheet into the design of a stadium spectators are protected from the elements while still enjoying a well lit, pleasant viewing environment. Less shading maximises grass growth creating a good quality pitch and the designer has the freedom to create a breathtaking architectural statement
• Thicknesses: 0.8mm-2.0mm
• Tints: Clear, Bronze, Opal
• Specials: Special transparent, translucent and opaque options including Green, Blue and Heatguard are available on request
• Protective Coatings: Double sided UV protection, IR Heat Block, Condensation Control*
*Available on selected profi les. Details available on request.
OPTIONS
• Stadia roofl ights and sidelights
APPLICATIONS
MAIN BENEFITS
• Excellent Light transmission
• Encourages grass growth for a high quality pitch
• Creates a pleasant environment for spectators
• 200 times stronger than glass
• High optical clarity
• Damage and impact resistant
• Performs well in extreme temperatures
• Light in weight, easily handled and installed
• Weatherable Longlife UV Protection
• 10 year Light transmission warranty
• 3 year weather breakage warranty
• Excellent fi re performance
• Match any metal roof profi le
Tel +44 (0) 28 9084 9999Fax +44 (0) 28 9083 [email protected]
www.brettmartin.com
REMEMBER
Plastic Sheets
WARRANTY
STANDARD PROFILES FOR STADIA
Support centres depend on sheet thickness and wind loading. The most commonly requested sheet widths have been used for illustrative purposes.Other sheet thicknesses and widths are available. For information on a specifi c project please contact our technical department.
SUPPORT CENTRES AND COVER WIDTHS
(Wind load of 2.0kN/m2 assumed)
PROFILE SHEET THICKNESS SUPPORT CENTRES
SHEET WIDTH COVER WIDTH
P1836 R60 1.5mm / 2.0mm 1.59m / 1.74m 918mm 800mm
P0107 150/45 1.5mm / 2.0mm 1.22m / 1.34m 952mm 900mm
P0206 32/1000 1.5mm / 2.0mm 0.95m / 1.04m 1079mm 1000mm
Non standard and bespoke profi les are available on request subject to minimum order quantitySpan / load data available for any profi le
PHYSICAL PROPERTIES
PROPERTIES TEST METHOD VALUE UNITS
Mechanical Properties Tensile strength at yield DIN 53455 >60 MPa
Tensile Strength at break DIN 53455 >70 MPa
Elongation at yield DIN 53455 6-8 %
Elongation at break DIN 53455 >100 %
Modulus of elasticity DIN 53457 >2300 MPa
Charpy notched impact strength DIN 53453 >50 kJ/m2
Physical Properties Specifi c gravity DIN 53479 1.20 g/cm3
Refractive index nD25 DIN 53491 1.586
Water absorption, 24h @23°C DIN 53495 0.35 %
Water permeability (thickness 1mm) DIN 53122 <2.28 g/m2
Thermal Properties Softening temperature Vicat ‘B’ DIN 53460 148 °C
Defl ection temperature, load 1.8IMPa DIN 53461 142 °C
Linear thermal expansion DIN 53752 6.8X10-5 m/m.K
Thermal conductivity DIN 52612 0.2 W/m.K
Maximum service temperature Permanent 100 °C
- no loading Short Term 130 °C
FIRE PERFORMANCE
TEST METHOD CLASSIFICATION
EN11925-2 B-s1,d0
(0.75mm – 2.0mm)
Marlon CS meets the following classifi cation
Classifi cation is subject to thickness.For further details please contact our technical department.
RoH
SC
om
plia
nt
HeavyM
etalFree
Marlon polycarbonate is also available in a range of mulitwall, fl at and corrugated multiwall sheet options. A range of accessories is also available. For further details please visit our website.
All reasonable care has been taken in the compilation of the information contained within this literature. All recommendations on the use of our products are made without guarantee as conditions of use are beyond the control of Brett Martin. It is the customer’s responsibility to ensure that the product is fi t for its intended purpose and that the actual conditions of use are suitable. Brett Martin pursues a policy of continuous product development and reserves the right to amend specifi cations without prior notice. Non standard and special options are subject to minimum order quantities. The photographs used are for illustration purposes only and simply indicate possible uses of Marlon CS corrugated sheet. Marlon is a registered trademark of Brett Martin Ltd.
P1836 P0107
P0206
