Corrosion Resistant Polypropylene Fan Catalogue - Axair Fans Fans... · Corrosion Resistant...

Nov

emb

er

2006

Ed

itio

n

Corrosion Resistant Polypropylene Fan Catalogue

Laboratory & Industrial Fume Extraction

www.axair-fans.co.uk

2 Axair Fans UK Ltd 01782 349 430

...About Axair Fans UK

• 230V or 115V single phase motor• 230/400V three phase direct-on-line or inverter supplied motor• 400/690V three phase star-delta connection in larger motor sizes.• Pre-wired electrical isolators• Motor starters• Inverter drives• Fume cupboard air alarms

• ATEX motor

• Choice of handing• Choice of standard or weather pedestals• Anti-vibration mountings• Flexible connectors• Flange pairs• Duct transformations• Manual dampers• Drain hose connectors• ATEX polypropylene/carbon fans

Lowfi eld Drive - Centre 500 - Wolstanton - Newcastle-under-Lyme - ST5 0UUTel : 01782 349430 Fax : 01782 349439 Email : [email protected] www.axair-fans.co.uk

All specifi cations, data and drawings are subject to alterations without prior notice

Application Knowledge : 20 years experience in general air movement; including corrosive, explosive and hot fume handling.

Plastic range : 9 basic sizes of polypropylene fan in plain scroll housing from stock, plus 3 sizes of in-line fan on short lead-time.

Stock facility: Large modern warehouse facility containing a vast selection of fans, fan components and general accessories.

Customised build: Fans assembled from standard components to create the perfect mechanical and electrical solution to safe fume extraction.

Customer care : Experience a sense of partnership with Axair Fans.

Axair offers you a wide range of electrical options including :

Axair offers you a wide range of mechanical options including :

[email protected] 3

Motors & Accessories

All polypropylene fans are directly driven by IEC dimensioned electric motors manufactured to BS4999-EN60034 Standards and are selected on their capacity for:

• Low electro-magnetic vibration

• Dimensional compactness

• Inverter drive compatibility

• Electrical terminal accessibility

• IP55 dust and hosed water protection

• Integrity of surface fi nish

Accessories

Motors

• Flange pairs with sockets to fi t standard plastic

ductwork. These can provide an easy method of

disconnecting the fan stack in situations where a disconnecting the fan stack in situations where a

fl exible connector is impractical.

• Pre-wiring of electrical isolators to the motor

terminals to ensure fi rst class electrical work in

factory conditions and an isolator on the fan

pedestal.

• Fume cupboard ‘low air’ alarms and air speed

controls that are modern sophisticated

products requiring no special training to install

and commission.

AXAIR polypropylene fans are the best starting point for a fully functional and reliableinstallation, but are just the fi rst consideration. It is the total ‘system’ that providesultimate customer satisfaction and a desire to repeat the experience. With that in mind we offer:-

disconnecting the fan stack in situations where a

• Mechanical isolation of the fan from the ductwork by means of chemical resistant and truly fl exible

duct connectors, attached by quick-release stainless steel band clips.

• Mechanical isolation of the fan from the motor pedestal or base by means of rubber anti-vibration

mountings of the correct hardness and compression.


Product Coding System

Index

SEAT ‘S’ FanElectrical data, sound levels & dimensions

Page 5

‘S’ Fan on weatherpadestal

Dimensions

Page 8

STORM ‘ST’ FanElectrical data, sound levels & dimensions

Page 9

‘ST’ Fan on weather pedestal

Dimensions

Page 12

Accessories

Page 13

ATEXCategory 3Consult Axair

Model abbreviationS: SEAT fume cupboard and general duty polypropylene fan ST: STORM fi lter duty and general low fl ow / higher pressure fanJ: JET in-duct and roof mounted in-line fan

Model numberS & J range impeller diameter (cm)ST model number

Scroll housing ‘handling’R: Right handed or clockwise rotation on the fan inlet (Eurovent LG)L: Left handed or anti-clockwise rotation on the fan inlet (Eurovent RD)

Inlet & discharge diameter75 ST1090 ST12125 ST14 & S15160 ST16, S20 & J20200 S25 & J25250 S30 & J30315 S35

Motor & impeller rotational speed

2 2 pole or 2870/min4 4 pole or 1450/min6 6 pole or 930/min

ATEX Flameproof

EX Where stated

Electrical supply

1 Single phase electrical supply3 Three phase electrical supply

Pedestal

STD Standard steel pedestal for indoor and sheltered installationsBOX Weather protecting polypropylene box pedestal

S 25 R /200 /4 EX /1 /STD

[email protected] 5

SEAT ‘S’ Fans

SEAT ‘S’ range fans are designed to provide high air fl ow rate against medium system pressures; typical applications being the extract of corrosive fumes from laboratory fume cupboards and industrial process tanks.

Notes: Tabulated current values are approximate and depend on make and model of motor.Size the wiring with a built-in safety factor. Set current overload protection to A(Full Load)A (Full Load) = Motor full load current - to select wiring and current overload protection.A (Start) = Motor starting current - mainly advisory for motors with Y/∆ facility.To obtain 230V 3phase current multiply 400V A(Full Load) by 1,732.* ∆ connected 400V direct-on-line. Y/∆ switching reduces starting current to 1/3 x A(Start).

Sound Level

Electrical DataModel /min kW Motor V A

(full load)A

(start)V A

(full load)A

(start)S15/2 2870 0,37 71-2 230 2,8 7 400 1,2 6S15/4 1450 0,25 71-4 230 2,0 5 400 1,0 5S20/2L 2870 0,55 71-2 230 3,8 9 400 1,5 7S20/2M 2870 0,75 80-2 230 5,1 14 400 1,8 10S20/2H 2870 1,10 80-2 230 7,0 19 400 2,5 14S20/4 1450 0,25 71-4 230 2,0 5 400 1,0 5S20/6 930 0,18 71-6 230 1,9 5 400 0,9 2,5S25/2L 2870 1,50 90S-2 230 10,8 28 400 3,7 20S25/2M 2870 2,20 90L-2 230 14,6 63 400 5,1 34S25/2H 2870 3,00 90L-2 400 6,9 49S25/4 1450 0,37 71-4 230 3,4 8 400 1,2 5S25/6 930 0,18 71-6 230 1,9 5 400 0,9 2,5S30/4 1450 1,50 90L-4 230 10,5 28 400 3,7 20S30/4L 1450 0,75 80-4 230 4,9 27 400 2,2 10S30/6 930 0,75 90S-6 230 4,8 16 400 2,2 8,0S35/4 1450 5,50 112M-4 400 11,4∆ *75∆S35/4H 1450 7,50 132M-4 400 14,7∆ *96∆S35/6 930 2,20 112M-4 400 5,3Y 24Y

Model /min dB(A) 63 125 250 500 1000 2000 4000 8000 Hz

S151450 58 39 52 60 64 64 60 56 48 dB(A)2870 75 56 69 77 81 81 77 73 65 dB(A)

S20960 53 34 47 55 59 59 55 51 43 dB(A)

1450 65 46 59 67 71 71 67 63 55 dB(A)2870 81 62 75 83 87 87 83 79 71 dB(A)

S25960 59 42 55 63 67 68 64 60 51 dB(A)

1450 69 52 65 73 77 78 74 70 61 dB(A)2870 87 70 83 91 95 96 92 88 79 dB(A)

S30930 63 48 61 69 73 74 70 66 57 dB(A)

1450 75 60 73 81 85 86 82 78 69 dB(A)

S35930 75 71 81 83 86 85 85 83 74 dB(A)

1450-5.5kW 79 75 85 87 90 89 89 87 78 dB(A)1450-7.5kW 84 80 90 92 95 94 94 92 83 dB(A)

THREE PHASESINGLE PHASE

SEAT ‘S’ range curves are in Total Pressure, as

appropriate for ducted systems.

The Pv characteristic is the Fan Velocity Pressure.

The performance available from the fan is

affected by the speed at which air leaves the

ventilation system and the KW rating of the

motor. For performances beyond the PV curve,

please consult Axair.


Performance Characteristics (50Hz)

S25 / 200

S35 / 315

S20 / 160

S30 / 250

S15 / 125

[email protected] 7

Handings

8 discharge angles available for each

direction of rotation RD or LG.

Applicable for all types except S35,

(available in LG handings only)

MODEL A B C ØD E F G H L M P Y Y1 Z X X1

S15/125/2&4 170 240 203 125 100 32 115 30 70 80 360 180 160 340 240 71

S20/160/2L,4&6 208 303 240 160 100 57 143 32 84 94 390 180 160 340 240 71

S20/160/2M&H 208 303 240 160 100 57 143 32 84 94 390 180 160 340 240 80

S25/200/4&6 248 365 310 200 103 92 164 35 95 105 415 180 160 420 300 71

S25/200/2L,M&H 248 365 310 200 103 92 164 35 95 105 515 240 220 460 370 90

S30/250/4&6 300 450 373 250 117 112 198 35 110 120 540 240 220 460 370 90

S30/250/4L 300 450 373 250 117 112 198 35 110 120 540 240 220 460 370 80

S35/315/4 370 570 450 315 130 170 255 60 150 170 724 350 314 600 468 112

S35/315/4H 370 570 450 315 130 170 255 60 150 170 822 350 314 600 468 132

S35/315/6 370 570 450 315 130 170 255 60 150 170 724 350 314 600 468 112

Dimensional Data

‘S’ Fan on a Box Pedestal

‘S’ range polypropylene fan on a weather-protecting

box pedestal (the drawing shows handing LG90 – other

handings available).

Dimensions of pedestal

Dimensions of scroll housing


MODEL A B C ØD E F G H L Q

S15 170 240 203 125 100 32 115 30 70 90

S20 208 303 240 160 100 57 143 32 84 104

S25 248 365 310 200 103 92 165 35 95 115

S30 300 448 373 250 117 112 198 35 110 130

S35 370 570 450 315 130 170 255 60 150 180

MODEL Motor R U1 U2 V V1 W W1

S15 all sizes 71 450 75 315 260 200 320 250

S20 0.25kW - 0.55kW 71 480 75 315 260 200 320 250

S20 0.75kW - 1.1kW 80 480 85 365 260 200 330 260

S25 0.37kW 71 505 76 374 260 200 330 260

S25 1.5kW - 2.2kW - 3kW 90 610 95 455 365 300 400 330

S30 all sizes 90 640 95 455 365 300 400 330

S35 5.5kW 112 880 122 578 500 400 585 480

S35 7.5kW 132 880 142 558 500 400 585 480

STORM ‘ST’ FansSTORM ‘ST’ range fans are designed to provide relatively low air fl ow rate against elevated system pressures; typical applications being air fi ltration, local extraction arms, fume scrubbers and chemical stores.

Electrical Data

Sound Level

[email protected] 9

Model /min kW Motor VA

(full load)A

(start)V A

(full load)A

(start)

ST 10/2 2870 0,12 56-2 230 1,4 2 400 0,5 6

ST 10/4 1450 0,09 56-4 230 1,0 1,5 400 0,4 1

ST 10/2/1E 1450 0,07 ERM(1) 230 0,11

ST 12/2 2870 0,37 71-2 230 2,8 7 400 1,2 6

ST 12/2 1450 0,25 71-4 230 2,0 5 400 1,0 5

ST 14/2 2870 1,10 80-2 230 7,0 19 400 2,5 14

ST 16/2 2870 2,20 90L-2 230 14,6 63 400 5 34

SINGLE PHASE THREE PHASE

/min dB(A) 63 125 250 500 1000 2000 4000 8000 Hz

ST12 2870 75 56 69 77 81 81 77 73 65 dB(A)

ST14 2870 79 60 73 81 85 85 81 77 69 dB(A)

ST16 2870 84 65 78 86 90 90 86 82 74 dB(A)

(1) ERM : external rotor motor

Notes: Tabulated current values are approximate and depend on make and model of motor.Size the wiring with a built-in safety factor. Set current overload protection to A(Full Load)A (Full Load) = Motor full load current - to select wiring and current overload protection.A (Start) = Motor starting currentTo obtain 230V 3phase current multiply 400V A(Full load) by 1,732.

(ST10 fi gures not available)

Sound power (Lw) in dB(A) at specifi ed frequency (Hz)Sound pressure at 3m range in dB(A)


Performance Characteristics (50Hz)

ST10 / 75 ST12 / 90

ST16 / 160ST14 / 125

STORM ‘ST’ range curves are in Static Pressure, as appropriate

for applications requiring elevated pressures.

The PV characteristic is the Fan Velocity Pressure

[email protected] 11

Dimensional Data

Handing

8 discharge angles available.

MODEL A B C ØD E G H L M N P Y Y1 Z X X1

ST10/75/2&4 115 135 127 75 158 97 32 48 57 - - 140 - 260 130 56

ST10/75/4/1E 115 135 127 75 158 97 32 48 57 - 205 - - - - -

ST10/75/4/1E/BKT(*) 115 135 127 75 158 97 32 48 57 - 205 - 100 165 135 -

ST12/90/4/2&4 145 175 163 90 212 130 45 80 72 10 350 180 160 340 240 71

ST14/125/2 188 232 227 125 218 170 55 110 83 10 433 180 160 340 240 80

ST16/160/2 235 288 278 160 262 205 40 100 97 10 477 240 160 420 370 90

(*) BKT : Right-angled bracket supporting the inlet side of fan housing


‘ST’ Fan on a Box Pedestal

‘ST’ range polypropylene fan on a weather-protecting

box pedestal (the drawing shows handing LG90 – other

handings available).

Dimensions of pedestal

Dimensions of scroll housing

MODEL A B C ØD E G H L Q

ST12 145 175 203 90 212 130 45 80 82

ST14 188 232 227 125 218 170 55 110 93

ST16 235 288 278 160 262 205 40 100 107

MODEL Motor P U1 U2 V V1 W W1

ST12 0,37kW 422 75 315 260 200 320 250

ST14 1,1kW 463 85 365 260 200 330 260

ST16 2,2kW 572 95 455 365 300 400 330

Duct Adaptor

Manual Damper

Flexible Connector & Quick Release Clips

Drain Hose ConnectorAdjustable Height

AV Mountings

Armoured Cable Gland

Weather Protecting Pedestal

Pre-wired IsolatorSingle Phase

Plastic Cable Gland

Pre-wired IsolatorThree phase

Metal Pedestal

Plastic Cable GlandDrain Hose

Connector

Flexible Connector & Quick Release Clips

AV Mountings

Manual Damper

Duct AdaptorSocket Flanges


Accessories

AccessoriesS15 S20 S25 S30 S35

Ø125 Ø160 Ø200 Ø250 Ø315

AV Mounting(Ø20x15 rubber bobbin)

AVB-M6 AVB-M6 AVB-M6 (1) (1)


(1) (1) AVB-M8 (S25/2) AVB-M8 (1)

AV Mounting(2)

(25 high rubber turret)(1) (1) (1) (1) AVT-M8

Flexible connector & stainless clips

FLX-125 FLX-160 FLX-200 FLX-250 FLX-315

Socket PVC flange (1) FLG-160 FLG-200 FLG-250 FLG-315

PVC adaptor(Ø125/160) DAD-1216(Ø125/200) DAD-1220

(Ø160/200) DAD-1620

(Ø200/250) DAD-2025(Ø200/315) DAD-2031

(Ø250/315) DAD-2531

(Ø315/355) DAD-3135

Manual damper DAM-125 DAM-160 DAM-200 DAM-250 DAM-315

Pre-wired isolatorSingle phase

IPW-1 IPW-1 IPW-1 IPW-1 IPW-1

Pre-wired isolatorThree phase

IPW-3 IPW-3 IPW-3 IPW-3 (1)

Drain hose connector(Ø12PP)

HOC-3812 HOC-3812 HOC-3812 HOC-3812 HOC-3812

Fume cupboard alarm

LABAIR-A(3)

LABAIR-C(4)LABAIR-A(3)




LABAIR-C(4)

AccessoriesST10 ST12 ST14 ST16

Ø75 Ø90 Ø125 Ø160


(1) AVB-M6 AVB-M6 (1)


(1) (1) (1) AVB-M8

AV Mounting(2)

25 high rubber turret(1) (1) (1) (1)


(1) (1) FLX-125 FLX-160

Socket PVC flange (1) (1) (1) 815401

PVC adaptor (1) (1)(Ø125/160) DAD-1216(Ø125/200) DAD-1220

(Ø160/250) DAD-1620

Manual damper (1) (1) DAM-125 DAM-160


(1) IPW-1 IPW-1 IPW-1



Drain hose connector (1) HOC-3812 HOC-3812 HOC-3812

Fume cupboard alarm (1)LABAIR-A(3)



LABAIR-C(4)


(1) Consult Axair Fans for details & availability(2) Also available for all weather boxesLABAIR-A(3) Fume cupboard air alarm & monitorLABAIR-A(4) Fume cupboard air alarm, monitor & air speed controller (when used in conjunction with an inverter or motorised damper)

‘S’ F

an

s‘S

T’ F

an

s

AccessoriesS15 S20 S25 S30 S35

Ø125 Ø160 Ø200 Ø250 Ø315


AVB-M6 AVB-M6 AVB-M6 (1) (1)


(1) (1) AVB-M8 (S25/2) AVB-M8 (1)

AV Mounting(2)

(25 high rubber turret)(1) (1) (1) (1) AVT-M8


FLX-125 FLX-160 FLX-200 FLX-250 FLX-315

Socket PVC fl ange (1) FLG-160 FLG-200 FLG-250 FLG-315

PVC adaptor(Ø125/160) DAD-1216(Ø125/200) DAD-1220

(Ø160/200) DAD-1620

(Ø200/250) DAD-2025(Ø200/315) DAD-2031

(Ø250/315) DAD-2531

(Ø315/355) DAD-3135

Manual damper DAM-125 DAM-160 DAM-200 DAM-250 DAM-315


IPW-1 IPW-1 IPW-1 IPW-1 IPW-1


IPW-3 IPW-3 IPW-3 IPW-3 (1)

Drain hose connector(Ø12PP)

HOC-3812 HOC-3812 HOC-3812 HOC-3812 HOC-3812

Fume cupboard alarm

LABAIR-A(3)





LABAIR-C(4)

AccessoriesST10 ST12 ST14 ST16

Ø75 Ø90 Ø125 Ø160


(1) AVB-M6 AVB-M6 (1)


(1) (1) (1) AVB-M8

AV Mounting(2)

25 high rubber turret(1) (1) (1) (1)


(1) (1) FLX-125 FLX-160

Socket PVC fl ange (1) (1) (1) 815401

PVC adaptor (1) (1)(Ø125/160) DAD-1216(Ø125/200) DAD-1220

(Ø160/250) DAD-1620

Manual damper (1) (1) DAM-125 DAM-160





Drain hose connector (1) HOC-3812 HOC-3812 HOC-3812

Fume cupboard alarm (1)LABAIR-A(3)



LABAIR-C(4)


Labair

Air Speed Alarms & Controllers for Laboratory Fume Cupboards

Compliant with EU laboratory standard EN-14175Electromagnetic standard EN 61326, RoHS Directive, CE 12

Standard Features

Display: 2 green LED - normal air speed 1 green LED - high air speed 1 red LED fl ashing - ‘low air’ 1 orange LED fl ashing - ‘sash high’ 1 orange LED - calibration Test: Fan, Mute & Light LED test facility

Alarms: Audible buzzer for ‘low air’ speed alarm Audible buzzer for ‘sash high’ alarm

Settings: Alarm delay for 0s, 10s or 30s System purge for 0s or 30s

Buttons: Start/stop, with orange LED, for fume fan & air make-up fan Mute to cancel audible alarms Light cupboard, with orange LED

Mounting: Flush or Surface Box with IP55 seal 210 x 90 fascia x 10 deep Vertical and horizontal options

Supply: 230Vac/12Vdc power supply included

Sensor: Ø22 tube. 3,5m shielded cable. Included: Calibrated 0,5m/s. Recalibration facility.

Options

Relay to switch for an external alarm device

Battery back-up for red LED.

Rechargeable and lasting up to 12 hours

Fascia colour white, dark grey, or silver plastic

Logo plate printed to customer requirements (100pieces minimum)

3 digit air speed display in m/s

UK 3 pin plug on 230V power supply lead

Models

LABAIR-A is a basic air speed monitor and alarm

LABAIR-C has PID outputs to an inverter speed controller or to air damper drive electronics

The purpose of LABAIR-C is to maintain a fi xed air speed at the fume cupboard sash face regardless of sash height, to save heat extraction from the laboratory, and to prevent draughts within the fume cupboard

Both models are available with LED Display only, or with Digital Display of air speed in m/s

Lowfield DriveCentre 500WolstantonNewcastle-under-LymeST5 0UUTel : 01782 349430Fax : 01782 349439

Email : [email protected]

ww

w.a

xair

-fan

s.co

.uk

Lowfield DriveCentre 500WolstantonNewcastle-under-LymeST5 0UUTel : 01782 349430Fax : 01782 349439

Email : [email protected]

Corrosion Resistant Polypropylene Fan Catalogue - Axair Fans Fans... · Corrosion Resistant...

Documents

Transcript of Corrosion Resistant Polypropylene Fan Catalogue - Axair Fans Fans... · Corrosion Resistant...