CORROSION Protection
-
Upload
gabriella-consuela -
Category
Documents
-
view
23 -
download
0
description
Transcript of CORROSION Protection
Jump to first page
04/19/23
CORROSION Protection
Alaska
Spring 2004
Jump to first page
04/19/23
Goals
Ensure tank and piping are safe from corrosion
Only applies to the portion of the UST system that routinely contains product. Tank and product piping only.
Jump to first page
04/19/23
First step for Operator
Figure out the construction material Tank Piping
Figure out cathodic protection option Fiberglass or non-metallic Galvanic Impressed current
Jump to first page
04/19/23
If non-metallic
Confirm through documentation for inspector.
That’s it.
Jump to first page
04/19/23
If Galvanic
Provide inspector with any previous test results – Look for them in your previous inspection report.
Have a cathodic protection test done if more than 3 years since last test.
Keep track of test results So long as there is enough cathodic
protection, nothing more to do
Jump to first page
04/19/23
Impressed Current Rectifier
Jump to first page
04/19/23
If Impressed Current
Find your 60 day rectifier log or start one. Provide inspector with any previous test
results and 60 day rectifier log. Have a cathodic protection test done if
more than 3 years since last test or as recommended by a Corrosion Expert.
Have rectifier checked and serviced, as needed.
Keep track of test records
Jump to first page
04/19/23
Tank lining
Not common No further testing so long as
cathodic protection present and maintained
Studies of liner failures are starting to come in.