CORROSION · 2019-10-15 · CORROSION CONTROL™ SYSTEM IN-TANK & IN-SUMP CORROSION PROTECTION The...
Transcript of CORROSION · 2019-10-15 · CORROSION CONTROL™ SYSTEM IN-TANK & IN-SUMP CORROSION PROTECTION The...
CORROSION CONTROL™ SYSTEMIN-TANK & IN-SUMP CORROSION PROTECTION
The Desiccant Pack acts to absorb humidity within the sump before it turns into corrosion-causing condensation within the containment.
REMOVE TANK WATER
Corrosion Control™ Advanced Protection (AP) submersible pumps feature powder- and e-coated finishes as well as stainless
steel components to combat the formation of corrosion.
The Water Separator suctions the tank bottom and separates out water and other corrosion contributors from the tank.
The Water Separator suctions the tank bottom to eliminate water and other corrosion contributors from the tank. System suctioning is driven by diverted fuel flow through an eductor. Clean fuel is returned to the
tank and the water/acid is stored for removal.
HOW DOES IT WORK?
The Corrosion Control™ Water Separator is paired with an EVO™ Series
Automatic Tank Gauge (ATG) to completely automate operation. From
controlling scheduled run time, to alerting the station owner when it’s
time to clear the collected water - the EVO™ Series ATG handles it all.
The Corrosion Control™ Sensor’s data is routed through the ATG to alert station
owners to the potential formation of corrosion. It also provides a warning for
high levels of moisture which may indicate it’s time for the Desiccant Pack
to be replaced.
SYSTEM CONTROL
The sensor has dual purpose functionality; detecting and alerting station owners to the presence of a corrosive atmosphere in sumps or tank ullages as well as the ability to detect high levels of humidity that could lead to corrosion.
MONITOR FOR CORROSION
CORROSION CONTROL™ WATER SEPARATOR
CORROSION CONTROL™ DESICCANT PACK
KEEP SUMPS DRY
CORROSION CONTROL™ SENSOR Corrosion Control™ Sensor
Corrosion Control™ Desiccant Pack
Corrosion Control™ Water Separator
Attack corrosion before it has a chance to develop with the fully integrated in-tank and in-sump Corrosion Control™ System. By proactively monitoring for and removing the main corrosion-causing elements including water, moisture and humidity, from both tanks and containment sumps, the Corrosion Control™ System takes an active role in protecting your fuel system from accelerated corrosion and the equipment deterioration it leads to. Keep your system running at peak performance and avoid costly maintenance, equipment replacement, downtime, and even system failure caused by excessive corrosion.
WATCH THE SYSTEM IN ACTION AT GO.FRANKLINFUELING.COM/CORROSION
FFS-0747 08-19
franklinfueling.com3760 Marsh Rd. • Madison, WI 53718, USATel: +1 608 838 8786 • Fax: +1 608 838 6433Tel: USA & Canada +1 800 225 9787 • Tel: UK +44 (0) 1473 243300Tel: Mex 001 800 738 7610 • Tel: FR +33 (0) 1 69 21 41 41 • Tel: CH +86 10 8565 4566
© 2019 Franklin Fueling Systemsm Inc. All Rights Reserved.