Cord Draw Parts (New Delac) Cord Draw ComponentsCord Draw Components Unique Features and...
Transcript of Cord Draw Parts (New Delac) Cord Draw ComponentsCord Draw Components Unique Features and...
28 mm (1.1") 28 mm (1.1")
34 mm(1.3")
60 mm (2.4") 60 mm (2.4")Product width
32 mm(1.3")
34 mm(1.3")
20 mm(.79")
32 mm (1.3")
6
Cord Draw Components
Product Code
Pulley Set 00210002
00210081
00210333
00210159
00210262
Cord Draw Parts (New Delac)
Master Roller Right & Left
Silver
Umber
White
Warmwhite
Silver
White
Product Name Product Code
Long Master Roller
00210264
00210001
One-way Master RollerSkylight AB Pulley
Product Name
Two Rollers are necessary for Two-way Draw.
Two Rollers are necessary for Two-way Draw.
Product Code
Overlap Cord Draw Parts Kit
00210225
00210354
Product Name
*1 Contents of Kit: Overlap Pulley Set (1 set), Pilot Roller (2pcs), Overlap Bracket (1 pc), Intermediate Stop (4 pcs), Cord Clip (10 pcs)
(*1)
Product Code
Pulley Set 00240005
00240075
00240042
Cord Draw Parts (Supertrac)
Master Roller Right & Left
00240045
00240060
Long Master Roller
Pilot Roller
Product Name Product Code
Cord Draw Parts Kit for Skylight
00240044
Product Name
*1 Contents of Kit: Overlap Pulley (1 pair), Pilot Roller (2pcs), End Stop (4 pcs), Overlap Bracket (1 pc), Cord Clip (10 pcs)*2 Contents of Kit: Curved Pulley (1 pair), Curved Master Roller (1 pair), Tension Pulley 240 (1 pc)
(*1)
(*2)
(*3)
Product Code
00240034
Overlap Installation Kit
00240043
Cord Draw Parts Kit for Curved Rail
Product Name
Skylight Pipe Roller
Skylight Pipe Clip
00240037
00240046
*3 Contents of Kit: Skylight AB Pulley (1 pair), Skylight Master Roller AB (1 pair), Tension Pulley 240 (1 pc), Pulley Set (1 set), Pipe Hook (2 pcs)
Product Code
Pulley Set
00250009 00250008
00250001
Cord Draw Parts (Theatrac)
Master Roller
Product Name Product Code
Overlap Pulley Set
00250010
Pilot Roller
Product Name
Cord Draw Components
3
Supertrac Rail Cross Section and Installation Dimensions
Single pulley side (opposite side to the operation side)
Double pulley side (operation side)
Side view
Ceiling Attachment
Products Straight(Two-way Draw, One-way Draw) Overlap Rail Curve Skylight
New DelacSupertracTheatracCM2000 *Super Selfie Cord Draw *
Cord Specifications for Different Rails
Cord Draw Components
*Allowable curtain weight for single side opening is 30 kg/66 lb (an extra 30 kg/66 lb for double side opening). When using brackets, leave space at intervals of 15 cm/5.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
New Delac Rail Cross Section and Installation Dimensions
Single Pulley side (opposite side to the operation side)
Double Pulley side (operation side)
Side view
Ceiling Attachment
*Allowable curtain weight for single side opening is 10 kg/22 lb (an extra 10 kg/22 lb for double side opening). When using brackets, leave space at intervals of 10 cm/3.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
201408E
•Rails can be selected to match curtain weight and size.
•All rails use wheel-type rollers for smooth operation.
•Parts are available for curved, skylight and overlap rails as well as straight rails.
100 mm (3.9")
92 mm (3.6")66 mm (2.6")
90 mm (3.5")45 mm(1.8")
200 mm (7.9")
224 mm(8.8")
240–340 mm(9.4–13")
270 mm (10.6")
100 mm(3.9")
66 mm(2.6")
90 mm (3.5")
83 mm (3.3")
170 mm (6.7")
240–340 mm(9.4–13")
75 mm (3.0")
110 mm (4.3")
*Refer to the each catalog.
End StopRoller
Cord Clip
Overlap Single Pulley
Overlap Double Pulley
Pilot RollerPilot Roller
Traverse Cord About 30–50 cm(12–20")
Rail
TensionPulley
40 mm (1.6")
32 mm(1.3")47 mm
(1.9")47 mm
(1.9")
42 mm(1.7")
42 mm(1.7") 40 mm (1.6")
92 mm (3.6") 92 mm (3.6")Product width
15.8 mm(.62")
22.5 mm (.89")
7 mm (.28")
8 mm (.31")
21 mm(.83")
32.2 mm (1.3")
Overlap rail mechanism
81 mm (3.2")96 mm (3.8")
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
28 mm (1.1") 28 mm (1.1")
34 mm(1.3")
60 mm (2.4") 60 mm (2.4")Product width
32 mm(1.3")
34 mm(1.3")
20 mm(.79")
32 mm (1.3")
6
Cord Draw Components
Product Code
Pulley Set 00210002
00210081
00210333
00210159
00210262
Cord Draw Parts (New Delac)
Master Roller Right & Left
Silver
Umber
White
Warmwhite
Silver
White
Product Name Product Code
Long Master Roller
00210264
00210001
One-way Master RollerSkylight AB Pulley
Product Name
Two Rollers are necessary for Two-way Draw.
Two Rollers are necessary for Two-way Draw.
Product Code
Overlap Cord Draw Parts Kit
00210225
00210354
Product Name
*1 Contents of Kit: Overlap Pulley Set (1 set), Pilot Roller (2pcs), Overlap Bracket (1 pc), Intermediate Stop (4 pcs), Cord Clip (10 pcs)
(*1)
Product Code
Pulley Set 00240005
00240075
00240042
Cord Draw Parts (Supertrac)
Master Roller Right & Left
00240045
00240060
Long Master Roller
Pilot Roller
Product Name Product Code
Cord Draw Parts Kit for Skylight
00240044
Product Name
*1 Contents of Kit: Overlap Pulley (1 pair), Pilot Roller (2pcs), End Stop (4 pcs), Overlap Bracket (1 pc), Cord Clip (10 pcs)*2 Contents of Kit: Curved Pulley (1 pair), Curved Master Roller (1 pair), Tension Pulley 240 (1 pc)
(*1)
(*2)
(*3)
Product Code
00240034
Overlap Installation Kit
00240043
Cord Draw Parts Kit for Curved Rail
Product Name
Skylight Pipe Roller
Skylight Pipe Clip
00240037
00240046
*3 Contents of Kit: Skylight AB Pulley (1 pair), Skylight Master Roller AB (1 pair), Tension Pulley 240 (1 pc), Pulley Set (1 set), Pipe Hook (2 pcs)
Product Code
Pulley Set
00250009 00250008
00250001
Cord Draw Parts (Theatrac)
Master Roller
Product Name Product Code
Overlap Pulley Set
00250010
Pilot Roller
Product Name
Cord Draw Components
3
Supertrac Rail Cross Section and Installation Dimensions
Single pulley side (opposite side to the operation side)
Double pulley side (operation side)
Side view
Ceiling Attachment
Products Straight(Two-way Draw, One-way Draw) Overlap Rail Curve Skylight
New DelacSupertracTheatracCM2000 *Super Selfie Cord Draw *
Cord Specifications for Different Rails
Cord Draw Components
*Allowable curtain weight for single side opening is 30 kg/66 lb (an extra 30 kg/66 lb for double side opening). When using brackets, leave space at intervals of 15 cm/5.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
New Delac Rail Cross Section and Installation Dimensions
Single Pulley side (opposite side to the operation side)
Double Pulley side (operation side)
Side view
Ceiling Attachment
*Allowable curtain weight for single side opening is 10 kg/22 lb (an extra 10 kg/22 lb for double side opening). When using brackets, leave space at intervals of 10 cm/3.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
201408E
•Rails can be selected to match curtain weight and size.
•All rails use wheel-type rollers for smooth operation.
•Parts are available for curved, skylight and overlap rails as well as straight rails.
100 mm (3.9")
92 mm (3.6")66 mm (2.6")
90 mm (3.5")45 mm(1.8")
200 mm (7.9")
224 mm(8.8")
240–340 mm(9.4–13")
270 mm (10.6")
100 mm(3.9")
66 mm(2.6")
90 mm (3.5")
83 mm (3.3")
170 mm (6.7")
240–340 mm(9.4–13")
75 mm (3.0")
110 mm (4.3")
*Refer to the each catalog.
End StopRoller
Cord Clip
Overlap Single Pulley
Overlap Double Pulley
Pilot RollerPilot Roller
Traverse Cord About 30–50 cm(12–20")
Rail
TensionPulley
40 mm (1.6")
32 mm(1.3")47 mm
(1.9")47 mm
(1.9")
42 mm(1.7")
42 mm(1.7") 40 mm (1.6")
92 mm (3.6") 92 mm (3.6")Product width
15.8 mm(.62")
22.5 mm (.89")
7 mm (.28")
8 mm (.31")
21 mm(.83")
32.2 mm (1.3")
Overlap rail mechanism
81 mm (3.2")96 mm (3.8")
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
28 mm (1.1") 28 mm (1.1")
34 mm(1.3")
60 mm (2.4") 60 mm (2.4")Product width
32 mm(1.3")
34 mm(1.3")
20 mm(.79")
32 mm (1.3")
6
Cord Draw Components
Product Code
Pulley Set 00210002
00210081
00210333
00210159
00210262
Cord Draw Parts (New Delac)
Master Roller Right & Left
Silver
Umber
White
Warmwhite
Silver
White
Product Name Product Code
Long Master Roller
00210264
00210001
One-way Master RollerSkylight AB Pulley
Product Name
Two Rollers are necessary for Two-way Draw.
Two Rollers are necessary for Two-way Draw.
Product Code
Overlap Cord Draw Parts Kit
00210225
00210354
Product Name
*1 Contents of Kit: Overlap Pulley Set (1 set), Pilot Roller (2pcs), Overlap Bracket (1 pc), Intermediate Stop (4 pcs), Cord Clip (10 pcs)
(*1)
Product Code
Pulley Set 00240005
00240075
00240042
Cord Draw Parts (Supertrac)
Master Roller Right & Left
00240045
00240060
Long Master Roller
Pilot Roller
Product Name Product Code
Cord Draw Parts Kit for Skylight
00240044
Product Name
*1 Contents of Kit: Overlap Pulley (1 pair), Pilot Roller (2pcs), End Stop (4 pcs), Overlap Bracket (1 pc), Cord Clip (10 pcs)*2 Contents of Kit: Curved Pulley (1 pair), Curved Master Roller (1 pair), Tension Pulley 240 (1 pc)
(*1)
(*2)
(*3)
Product Code
00240034
Overlap Installation Kit
00240043
Cord Draw Parts Kit for Curved Rail
Product Name
Skylight Pipe Roller
Skylight Pipe Clip
00240037
00240046
*3 Contents of Kit: Skylight AB Pulley (1 pair), Skylight Master Roller AB (1 pair), Tension Pulley 240 (1 pc), Pulley Set (1 set), Pipe Hook (2 pcs)
Product Code
Pulley Set
00250009 00250008
00250001
Cord Draw Parts (Theatrac)
Master Roller
Product Name Product Code
Overlap Pulley Set
00250010
Pilot Roller
Product Name
Cord Draw Components
3
Supertrac Rail Cross Section and Installation Dimensions
Single pulley side (opposite side to the operation side)
Double pulley side (operation side)
Side view
Ceiling Attachment
Products Straight(Two-way Draw, One-way Draw) Overlap Rail Curve Skylight
New DelacSupertracTheatracCM2000 *Super Selfie Cord Draw *
Cord Specifications for Different Rails
Cord Draw Components
*Allowable curtain weight for single side opening is 30 kg/66 lb (an extra 30 kg/66 lb for double side opening). When using brackets, leave space at intervals of 15 cm/5.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
New Delac Rail Cross Section and Installation Dimensions
Single Pulley side (opposite side to the operation side)
Double Pulley side (operation side)
Side view
Ceiling Attachment
*Allowable curtain weight for single side opening is 10 kg/22 lb (an extra 10 kg/22 lb for double side opening). When using brackets, leave space at intervals of 10 cm/3.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
201408E
•Rails can be selected to match curtain weight and size.
•All rails use wheel-type rollers for smooth operation.
•Parts are available for curved, skylight and overlap rails as well as straight rails.
100 mm (3.9")
92 mm (3.6")66 mm (2.6")
90 mm (3.5")45 mm(1.8")
200 mm (7.9")
224 mm(8.8")
240–340 mm(9.4–13")
270 mm (10.6")
100 mm(3.9")
66 mm(2.6")
90 mm (3.5")
83 mm (3.3")
170 mm (6.7")
240–340 mm(9.4–13")
75 mm (3.0")
110 mm (4.3")
*Refer to the each catalog.
End StopRoller
Cord Clip
Overlap Single Pulley
Overlap Double Pulley
Pilot RollerPilot Roller
Traverse Cord About 30–50 cm(12–20")
Rail
TensionPulley
40 mm (1.6")
32 mm(1.3")47 mm
(1.9")47 mm
(1.9")
42 mm(1.7")
42 mm(1.7") 40 mm (1.6")
92 mm (3.6") 92 mm (3.6")Product width
15.8 mm(.62")
22.5 mm (.89")
7 mm (.28")
8 mm (.31")
21 mm(.83")
32.2 mm (1.3")
Overlap rail mechanism
81 mm (3.2")96 mm (3.8")
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
4 5
Cord Draw ComponentsCord Draw Components
Tension Pulley
To keep the Traverse Cord from becoming tangled with Rollers, Tension Pulley gives enough tension to the cord. There are three types available. Installation on the floor or the wall is possible.
Support Pulleys
Support pulleys can be used for guiding Traverse Cords to avoid obstructions, or to change the operating location of stage curtains or skylights.
Tension Pulley 240 Tension Pulley 450 Tension Pulley 650
For Lateral Direction Use For Internal and External Corners
*2 Materials and Finishes: Cover part=Coated steel Pulley part=Polyacetal resin Applicable cord diameter: Up to 5 mm (.20")
Application Example
Installation Dimensions (Support Pulley)
For Lateral Direction Use Pulley A
For Internal Corner Pulley B
For External Corner Pulley C
Product Code
Tension Pulley 240
00500005
00500002
00500007
Cord Draw Parts (Tension Pulley, Traverse Cord and Support Pulley)
Tension Pulley 450 Support Pulley B
Support Pulley C
White
Brown
Silver
Silver
Product Name Product Code
Support Pulley A
00500009
00500010
00500011
Product Name
Tension Pulley 650 00500008
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
*Pulley diameter: 26 mm (1.0") grooved pulley
(*2)
(*2)
(*2)
*1 Material: 100% polyester
White
White
White
Silver
Silver
Silver
Traverse Cord 2.8 mm DIA. (for New Delac)
Traverse Cord 3.5 mm DIA. (for Supertrac)
Traverse Cord 4.5 mm DIA. (for Theatrac)
00580010
00580009
00580011(*1)
(*1)
(*1)
2
Cord Draw ComponentsUnique Features and Applications
Traverse Cord mechanismSecure a Master Roller to Traverse Cord.As indicated in the figure, when the draw cord is pulled, the Master Roller pulls the curtain open.
Master Roller used to overlap curtains
Pay attention to rail length
Dimensions of overlapping part
New Delac
Supertrac
Theatrac
Assembling a Cord Draw rail (for opening curtains on both sides)
*When a deeper overlap is required, overlap the rails.
*When installing a cord draw rail, the overall length is the length of the rail plus single pulley and double pulley (A + B) dimensions.
* The Theatrac uses an inner type single pulley.
•Traverse Cord length Cut to the length equivalent to (Total rail length x 2) + (Installation height x 2) 500 mm/20".
Assembly diagram
Threading the Traverse Cord1
1. Thread the cord as indicated in the figure.2. Thread the cord through the cord band of the Master Roller Left.3. Thread the cord through single and double pulleys as indicated in the figure.4. Tie the Traverse Cord at the right Master Roller.
Assembly method2
1. Insert Rollers in the rail.2. Secure single and double pulleys at each end with end stops.
Slack adjustment3
1. Pull the Traverse Cord, and move Master Rollers toward each end.2. Pull the left cord band of the Master Roller using the pliers, and hook the Traverse Cord as indicated in the figure.
New DelacNew Delac Skylight AB PulleySupertracSupertrac Cording for Curved Supertrac Skylight AB PulleyTheatracSuper Selfie Cord Draw
Products A B C D40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")
–31 mm (1.2")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")
–53 mm (2.0")
60 mm (2.4")68 mm (2.7")92 mm (3.6")92 mm (3.6")100 mm (3.9")83 mm (3.3")53 mm (2.0")
40 mm (1.6")44 mm (1.7")63 mm (2.5")63 mm (2.5")74 mm (2.9")42 mm (1.7")31 mm (1.2")
*Please pass the Traverse Cord through the position of the figure so as not to get entangled in the Master Roller and the Roller.
Single Pulley Traverse Cord
Master Roller
Master Roller
RailDouble Pulley
TensionPulley
AC D
BRail length
RailSingle Pulley Double Pulley
Pulley A
Tension Pulley
Rail
Pulley APulley C
Pulley C
PulleyB
PulleyB
Tension Pulley
Tension Pulley
Rail Rail
450 –650 mm(18–26")
240 –340 mm(9.4–13")
650 –980 mm(26–39")
26 mm(1.0")
26 mm (1.0")23 mm (.90")
11 mm (.43")
29 mm(1.1")
50 mm(2.0")
40 mm (1.6")
36 mm(1.4")
26 mm(1.0")
29 mm (1.1")
36 mm(1.4")
26 mm(1.0")
42 mm(1.7")
29 mm (1.1")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
50 mm (2.0")
22 mm (.87")
60 mm(2.4")
650–980 mm(26–39")450–650 mm
(18–26")240–340 mm(9.4–13")
Master Roller
Master Roller
57 mm (2.2")
75 mm (3.0")110 mm (4.3")
94 mm (3.7")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Left
Master Roller Right
81 mm (3.2")
96 mm (3.8")82 mm (3.2")
Master Roller Right
Master Roller Left
Single Pulley
RailRoller
TensionPulley
Double Pulley
Single Pulley Double PulleyRail
Master Roller LeftMaster Roller Right
TensionPulley
TraverseCord
Single Pulley
Double Pulley
Rail
Master Roller Left
Master Roller Right
Roller
End Stop
Single Pulley Double Pulley
Roller
Master Roller Left
Master Roller Right
TensionPulley
Roller
Traverse Cord
28 mm (1.1") 28 mm (1.1")
34 mm(1.3")
60 mm (2.4") 60 mm (2.4")Product width
32 mm(1.3")
34 mm(1.3")
20 mm(.79")
32 mm (1.3")
6
Cord Draw Components
Product Code
Pulley Set 00210002
00210081
00210333
00210159
00210262
Cord Draw Parts (New Delac)
Master Roller Right & Left
Silver
Umber
White
Warmwhite
Silver
White
Product Name Product Code
Long Master Roller
00210264
00210001
One-way Master RollerSkylight AB Pulley
Product Name
Two Rollers are necessary for Two-way Draw.
Two Rollers are necessary for Two-way Draw.
Product Code
Overlap Cord Draw Parts Kit
00210225
00210354
Product Name
*1 Contents of Kit: Overlap Pulley Set (1 set), Pilot Roller (2pcs), Overlap Bracket (1 pc), Intermediate Stop (4 pcs), Cord Clip (10 pcs)
(*1)
Product Code
Pulley Set 00240005
00240075
00240042
Cord Draw Parts (Supertrac)
Master Roller Right & Left
00240045
00240060
Long Master Roller
Pilot Roller
Product Name Product Code
Cord Draw Parts Kit for Skylight
00240044
Product Name
*1 Contents of Kit: Overlap Pulley (1 pair), Pilot Roller (2pcs), End Stop (4 pcs), Overlap Bracket (1 pc), Cord Clip (10 pcs)*2 Contents of Kit: Curved Pulley (1 pair), Curved Master Roller (1 pair), Tension Pulley 240 (1 pc)
(*1)
(*2)
(*3)
Product Code
00240034
Overlap Installation Kit
00240043
Cord Draw Parts Kit for Curved Rail
Product Name
Skylight Pipe Roller
Skylight Pipe Clip
00240037
00240046
*3 Contents of Kit: Skylight AB Pulley (1 pair), Skylight Master Roller AB (1 pair), Tension Pulley 240 (1 pc), Pulley Set (1 set), Pipe Hook (2 pcs)
Product Code
Pulley Set
00250009 00250008
00250001
Cord Draw Parts (Theatrac)
Master Roller
Product Name Product Code
Overlap Pulley Set
00250010
Pilot Roller
Product Name
Cord Draw Components
3
Supertrac Rail Cross Section and Installation Dimensions
Single pulley side (opposite side to the operation side)
Double pulley side (operation side)
Side view
Ceiling Attachment
Products Straight(Two-way Draw, One-way Draw) Overlap Rail Curve Skylight
New DelacSupertracTheatracCM2000 *Super Selfie Cord Draw *
Cord Specifications for Different Rails
Cord Draw Components
*Allowable curtain weight for single side opening is 30 kg/66 lb (an extra 30 kg/66 lb for double side opening). When using brackets, leave space at intervals of 15 cm/5.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
New Delac Rail Cross Section and Installation Dimensions
Single Pulley side (opposite side to the operation side)
Double Pulley side (operation side)
Side view
Ceiling Attachment
*Allowable curtain weight for single side opening is 10 kg/22 lb (an extra 10 kg/22 lb for double side opening). When using brackets, leave space at intervals of 10 cm/3.9" or less at either end and 50 cm/20" or less in the middle. (When attaching to the wall, use single brackets only.)
201408E
•Rails can be selected to match curtain weight and size.
•All rails use wheel-type rollers for smooth operation.
•Parts are available for curved, skylight and overlap rails as well as straight rails.
100 mm (3.9")
92 mm (3.6")66 mm (2.6")
90 mm (3.5")45 mm(1.8")
200 mm (7.9")
224 mm(8.8")
240–340 mm(9.4–13")
270 mm (10.6")
100 mm(3.9")
66 mm(2.6")
90 mm (3.5")
83 mm (3.3")
170 mm (6.7")
240–340 mm(9.4–13")
75 mm (3.0")
110 mm (4.3")
*Refer to the each catalog.
End StopRoller
Cord Clip
Overlap Single Pulley
Overlap Double Pulley
Pilot RollerPilot Roller
Traverse Cord About 30–50 cm(12–20")
Rail
TensionPulley
40 mm (1.6")
32 mm(1.3")47 mm
(1.9")47 mm
(1.9")
42 mm(1.7")
42 mm(1.7") 40 mm (1.6")
92 mm (3.6") 92 mm (3.6")Product width
15.8 mm(.62")
22.5 mm (.89")
7 mm (.28")
8 mm (.31")
21 mm(.83")
32.2 mm (1.3")
Overlap rail mechanism
81 mm (3.2")96 mm (3.8")