CORAL e VIGILO - Vorota.Co.Ua index.phpELPRO S40 Electronic microprocessor programmer with plug-in...
Transcript of CORAL e VIGILO - Vorota.Co.Ua index.phpELPRO S40 Electronic microprocessor programmer with plug-in...
-
CORAL e VIGILO
Versions with Leds
Coral and Vigilo retractable traffi c control posts feature cylindrical steel posts and automatic oil-hydraulic actions.They have been designed to manage and prevent vehicular access and to mark cycle paths, footpaths and urban accesses in general.These traffi c control posts come in two models:- Coral with 100 mm diameter retractable post; in the 500 mm and 800 mm travel versions.- Vigilo with 200 mm diameter retractable post; in the 500 mm and 800 mm travel versions.They can be customised by installing traffi c lights indicating post movements.
• Built-in enclosure
• Models with 100 mm or 200 mm diameter post
• Models with 500 mm or 800 mm travel
• Post with rubber edge
• Can be fi tted with release solenoid valve
Fully retracting traffi c control posts, rapid installation
Release operations with manual lowering of the traffi c control post
АдминистраторМашинописный текст
АдминистраторМашинописный текст
-
CORAL-VIGILO TECHNICAL SPECIFICATIONS
Coral 1050Stroke 500 mmStatic weight Coral 1050 - Kg 86Colour RAL 7016 - Anthracite GrayPost material “Fe 360”
Vigilo 2250Stroke 500 mmStatic weight Vigilo 2250 - Kg 102Colour RAL 7016 - Anthracite GrayPost material “Fe 360”
Vigilo 2280Stroke 800 mmStatic weight Vigilo 2280 - Kg 131Colour RAL 7016 - Anthracite GrayPost material “Fe 360”
Coral 1080Stroke 800 mmStatic weight Coral 1080 - Kg 104Colour RAL 7016 - Anthracite GrayPost material “Fe 360”
Hydraulic UnitPump type P10Pump fl ow rate 4.45 /min.Average working pressure 2 MPa (20 bar)Max pump pressure 4 MPa (40 bar)Working temperature –20°C +80°COil type Oil FadiniPump assembly static weight 10 KgPump assembly protection standards IP 54Electric MotorPower rating 0.25 KW (0.33 HP)Supply voltage 230 VAbsorbed current 1.8 AFrequency 50 HzAbsorbed power 330 WCapacitor 20 µFMotor revolutions 2˙800 rpmService standards S 3Oil-hydraulic pistonPiston stroke travel time Coral 1050 and Vigilo 2250 4 sPiston stroke travel time Coral 1080 and Vigilo 2280 6 sPiston stroke Coral 1050 and Vigilo 2250 500 mmPiston stroke Coral 1080 and Vigilo 2280 800 mmShaft diametre 16 mmPiston diametre 30 mmCalibrated thrust 15 daNProtection standard complete ref. IP 557Performance Coral 1050 and Vigilo 2250 (stroke 500 mm)Duty cycle 4 s Opening - 30 s Dwell - 4 s Closing - 30 s Dwell
Time of one complete cycle 68 sComplete cycles Opening - Dwell - Closing - Dwell No. 53/hourCycles per year (8 hours’ service per day) No. 154˙000Performance Coral 1080 and Vigilo 2280 (stroke 800 mm)Duty cycle 6 s Opening - 30 s Dwell - 6 s Closing - 30 s Dwell
Time of one complete cycle 72 sComplete cycles Opening - Dwell - Closing - Dwell No. 50/hourCycles per year (8 hours’ service per day) No. 146˙000
-
STRABUC 918
This oil-hydraulic product has been designed to ensure maximum peace of mind and protection for any entrance.The post, which disappears completely when lowered, is made of thick steel. During movement it is made clearly visible by the fl ashing warning lamps, in compliance with current safety standards.In the case of a power failure, the post can be lowered by carrying out a simple operation using the release key.
• Total disappearance at ground level
• Post with rubber edge
• Movement accompanied by internal fl ashing warning lights
• Optional acoustic signal during rising and lowering movements
• Can be fi tted with release solenoid valve
Fully retractable oil-hydraulic traffi c control post
Fully retracted post Detail of manual release using spanner in event of power failure
INOX Version with “AISI 304” stainless steel post
-
Aluminium cover collar
Retractable post in Festeel, thickness 4mm,colour RAL 1028 MelonYellow
Cylindrical container foroil-hydraulic piston andmain unit
Flanged cylindricalcontainer to be cementedinto the ground to housethe Strabuc 918
10 metres of cables forthe electric motor, limitswitches, LEDs, solenoidvalve (optional) andbuzzer (optional)
Support plates to be cemented
Rubber edge
Amber yellow fl ashingindicator LEDs
Type approvedretro-refl ecting adhesive
STRABUC 918 TECHNICAL SPECIFICATIONS
STRABUC 918 DIMENSIONS
A surcharge will be applied for RAL colour orders differing from standard issue colours.
Electric motor Output 0.25 KW (0.33 HP)Consumption power 330 WPower supply voltage 230 V ±10%Frequency 50 HzAbsorbed current 1.8 ARotation speed 2˙800 rpmIntermittent service S3LED power supply 230 V - 50 HzHydraulic main unitHydraulic pump P10Pump fl ow rate 4.45 /minOperating pressure 2 MPa (20 bar)Maximum pressure 4 MPa (40 bar)Operating temperature –20°C +80°CHydraulic oil type Oil FadiniStatic weight 10 KgProtection class IP 54Oil-hydraulic pistonPiston diameter 30 mmShaft diameter 16 mmPiston stroke 740 mmTravel time 6 secsCalibrated thrust 18 daNPerformanceShock resistance 10˙000 JMaximum static load 20˙000 Kg
Service cycle:
6 s ascent30 s dwell6 s descent30 s dwell
Full cycle time 72 seconds
Full Opening - Dwell - Closing - Dwell cycles
No. 50/hour
Annual cycles (considering 8-hour working day)
No. 146˙000
Complete weight of Strabuc 918 128 KgComplete protection Class IP 557Post colour RAL 1028 Melon yellow
Post material Fe 360 steel
Cylindrical Container (to be cemented)
Material“Fe 360” sheet iron
TreatmentCataphoresis-treated, black
Calandered sheet metal thickness
1.5 mm
Anchoring fl ange thickness
10 mm
4 Support plateclamping bolts
M10x30
4 Washers Ø10
4 Support plates 40x10 FlatComplete weight 25 Kg
Cylindrical ContainerStrabuc 918Limit switches
-
This reinforced thick steel oil-hydraulic automation disappears totally when lowered and has a reinforced pump cylinder-lock. It is ideal for protecting shops, garages, car saloons, banks and other entrances.
• Maximum security offered by the cylinder lock with customised key
• Rising post in thick steel
• Movement accompanied by internal fl ashing warning lights
• Manual release by reinforced cylinder lock (optional)
• Optional acoustic signal during rising and lowering movements
• Post with rubber edge
Armoured retractable oil-hydraulic anti-ram raid traffi c control post
STRABUC 930Heavy Armoured
Fully retracted post Operation for manual release of the post, with removal of the security pump lock barrel (optional)
-
12 mm-thick Fe steel re-tractable post, RAL 7016 Anthracite Gray
9 Amber yellow indicator LEDs
Security pumplock barrel
Aluminium cover collar
Cylindrical container foroil-hydraulic piston andmain unit
Flanged cylindricalcontainer to be cementedinto the ground to housethe Strabuc 930
10 metres of cables forthe electric motor, limitswitches, LEDs, solenoidvalve (optional) andbuzzer (optional)
Support plates to be cemented
Rubber edge
Type approvedretro-refl ecting adhesive
Adapted for security pump lock barrel
Manual release protection fl ap plate
3 runner rods
Hydraulic main unit
Built-in hydraulic main unit-piston body
10 metres of cables for the electric motor, limit switches, LEDs,
solenoid valve (optional) and
buzzer (optional)
Eyebolt for hitching and hoisting
Strabuc 930 Heavy Armoured
STRABUC 930 TECHNICAL SPECIFICATIONS
Cylindrical Container
STRABUC 930 DIMENSIONS
A surcharge will be applied for RAL colour orders differing from standard issue colours.
Electric motor Output 0.25 KW (0.33 HP)Consumption power 330 WPower supply voltage 230 V ±10%Frequency 50 HzAbsorbed current 1.8 ARotation speed 2˙800 rpmIntermittent service S3LED power supply 230 V - 50 HzHydraulic main unitHydraulic pump P10Pump fl ow rate 4.45 /minOperating pressure 2 MPa (20 bar)Maximum pressure 4 MPa (40 bar)Operating temperature –20°C +80°CHydraulic oil type Oil FadiniStatic weight 10 KgProtection class IP 54Oil-hydraulic pistonPiston diameter 40 mmShaft diameter 16 mmPiston stroke 740 mmTravel time 10 secsCalibrated thrust 18 daNPerformanceShock resistance 15˙000 JMaximum static load 20˙000 Kg
Service cycle:
10 s ascent30 s dwell10 s descent30 s dwell
Full cycle time 80 seconds
Full Opening - Dwell - Closing - Dwell cycles
No. 45/hour
Annual cycles (considering 8-hour working day)
No. 131˙000
Complete weight of Strabuc 930 180 KgComplete protection Class IP 557Post colour RAL 7016 - Anthracite Gray
Post material Fe 360 steel
Cylindrical Container (to be cemented)
Material“Fe 360” sheet iron
TreatmentCataphoresis-treated, black
Calandered sheet metal thickness
1.5 mm
Anchoring fl ange thickness
10 mm
4 Support plateclamping bolts
M10x30
4 Washers Ø10
4 Flat support plates 40x10Complete weight 25 Kg
Limit switches
-
STRABUC 930Opinat
The Strabuc 930 Opinat is the version of the Strabuc 930 heavy-duty armoured traffi c control post type approved for installation in public places such as squares and city centres. It comes in a complete kit with a release solenoid valve for immediate lowering of the retractable post in the event of a blackout (in just 5 seconds), with metal detectors to detect the presence of vehicles, movement buzzer, fl ashing amber colour indicator LEDs and traffi c lights.
Leaving the way clear for emergency vehiclesThe Strabuc 930 Opinat comes with an emergency acoustic detector that picks up the sounds emitted by the sirens of public safety and emergency vehicles and that lowers the post immediately as soon as the signal is detected.
• Post with rubber edge
• Traffi c post lowers in the event of a power failure
Fully retractable oil-hydraulic traffi c control post type approved for installations in public places
Accessories for a type approved installation
SITI 63/2TR433.92 MHzradio transmitter
CHIS 37key switch
“DETECTOR” Entrance and exit metal loop detectors
EAR 35emergency siren detector with “break glass” emergency push button
ELPRO S40Electronic microprocessor programmer with plug-in Siti 63/2R radio receiver
CABINET for outdoor installation
Three-lamp TRAFFIC LIGHTS
Two-module VISUAL 344CABINET for control accessory installation
Road SIGN
MobileRetractabletraffi c control post
-
12 mm-thick Fe steel re-tractable post, RAL 7016 Anthracite Gray
9 Amber yellow indicator LEDs
Movement buzzer STRABUC 930 OPINAT TECHNICAL SPECIFICATIONS
Cylindrical Container
STRABUC 930 OPINAT DIMENSIONS
A surcharge will be applied for RAL colour orders differing from standard issue colours.
Electric motor Output 0.25 KW (0.33 HP)Consumption power 330 WPower supply voltage 230 V ±10%Frequency 50 HzAbsorbed current 1.8 ARotation speed 2˙800 rpmIntermittent service S3LED power supply 230 V - 50 HzHydraulic main unitHydraulic pump P10Pump fl ow rate 4.45 /minOperating pressure 2 MPa (20 bar)Maximum pressure 4 MPa (40 bar)Operating temperature –20°C +80°CHydraulic oil type Oil FadiniStatic weight 10 KgProtection class IP 54Oil-hydraulic pistonPiston diameter 40 mmShaft diameter 16 mmPiston stroke 740 mmTravel time 10 secsCalibrated thrust 18 daNPerformanceShock resistance 15˙000 JMaximum static load 20˙000 Kg
Service cycle:
10 s ascent30 s dwell10 s descent30 s dwell
Full cycle time 80 seconds
Full Opening - Dwell - Closing - Dwell cycles
No. 45/hour
Annual cycles (considering 8-hour working day)
No. 131˙000
Complete weight of Strabuc Opinat 180 Kg (without housing)Complete protection Class IP 557Post colour RAL 7016 - Anthracite Gray
Post material Fe 360 steel
Cylindrical Container (to be cemented)
Material“Fe 360” sheet iron
TreatmentCataphoresis-treated, black
Calandered sheet metal thickness
1.5 mm
Anchoring fl ange thickness
10 mm
4 Support plateclamping bolts
M10x30
4 Washers Ø10
4 Flat support plates 40x10Complete weight 25 Kg
Aluminium cover collar
Cylindrical container foroil-hydraulic piston andmain unit
Flanged cylindricalcontainer to be cementedinto the ground to housethe Strabuc 930 Opinat
10 metres of cables forthe electric motor, limitswitches, LEDs, solenoidvalve (optional) andbuzzer (optional)
Support plates to be cemented
Rubber edge
Type approvedretro-refl ecting adhesive
Strabuc 930 Opinat
Limit switches
-
GASPO 252
1˙29
0 m
m
790
mm
500
mm
Ø275 mm
VIMARI 2316
Ø250 mm
214
mm
500
mm
714
mm
This manual traffi c control post features a cylindrical steel post. The retractable post’s rising and lowering movements are performed using gas springs located inside the cylinder. It does not need regulating or calibrating, which means immediate installation and correct operation.
• Total weight: 77 Kg (Post: 50 Kg - Enclosure: 27 Kg)
• Height of traffi c control post: 500 mm
• With two gas springs
• Max crash resistance to a mass of 1˙000 Kg at 50 Km/h speed
• Version with a triangular-shaped release key (upon request)
• Version with electrical utilities
Retractable manual traffi c control post
Hatch for access to internal manual release mechanism
Ø200 mmthickness 5 mm
Type approved refl ective sticker
Rubber edge
Cataphoresis treated and painted steel postAnthracite Gray - RAL 7016
Enclosure to be cemented into the ground
This cylindrical steel traffi c control post can be removed from its socket.A moulded spanner can be used to release the Vimari 2316 traffi c control post and remove it from the socket.During all introduction and removal operations, the moulded spanner remains attached to the lock, to favour raising opera-tions. It does not need regulating or calibrating, which means immediate installation and correct operation. The top of the Vi-mari 2316 post is fi tted with a rubber edge to protect it against violent collisions.A type approved refl ective sticker makes it visible even at night.Once Vimari has been removed, the socket can be covered with a metal cover plate.
• Post weight: 18 Kg - Socket weight: 9 Kg• Cover weight: 4 Kg• Height of traffi c control post: 500 mm
Ø200 mmthickness 5 mm
Type approved refl ective sticker
Rubber edge
Cataphoresis treated and painted steel post Anthracite Gray - RAL 7016
Socket cover
Socket to be cemented into the ground
Hatch for access to internal manual release mechanism
Removable manual traffi c control post
MANUAL TRAFFIC CONTROL POSTS
-
SICU 18
SIBLI 17120
mm
780
mm
240 x 240 mm
120 mm
120
mm
780
mm
220 x 220 mm
120 mm
Ø300 mm
Ø300 mm
This removable squared post in reinforced stainless steel is ideal for protecting vehicle entrances, areas of access and important places. It offers maximum protection thanks to its collapse-resistant internal structure made of solid reinforced steel. SIBLI 17 is installed in a socket (buried at ground level) and is easy to remove from its seat thanks to a manual release system with customised key, which opens the highly secure “pump” lock; a roller at the base of the post facilitates its removal without physical exertion or damage.
• Stainless steel
• Internal core in reinforced steel
• Height of traffi c control post: 780 mm
• Post weight: 39 Kg - Socket weight: 14 Kg
• Release with armoured cylinder lock
Removable reinforced post
• Stainless steel
• Internal core in reinforced steel
• Height of traffi c control post: 780 mm
• Total weight: 31 Kg
Fixed reinforced post
-
CORAL and VIGILO series
Coral Steady /50Height 500 mmDiameter 100 mmThickness 5 mm
Vigilo Steady /50Height 500 mmDiameter 200 mmThickness 5 mm
Vigilo Steady /80Height 800 mmDiameter 200 mmThickness 5 mm
POSTS
fi xed to the ground
Coral Steady /80Height 800 mmDiameter 100 mmThickness 5 mm
Fixed cylindrical posts in treated painted steel with convex head, or stainless steel version (for Strabuc series only).Ideal for protecting shop windows, shops and entrances or as an accessory to complete other moving traffi c control post systems. Simple and immediate installation to the ground makes these posts an effective solution that also pleasantly adapts to the urban context. They come with expanding bolts for ground fi xing, or a fl anged option allows for cementing.An optional type-approved refl ective sticker can be applied to the top of the post.Flashing amber colour LEDs are provided for the Strabuc series only.
-
920
mm
200 x 200 mm
50x50 mm
290 mm
70 c
m
27.5 cm
70 c
m
27.5 cm 27.5 cm
70 c
m
The POSTO device is an accessory for safeguarding and customizing parking spaces. It is ideal for car parks in condominiums, residential complexes and work places. The POSTO parking space marker is fi xed to the ground and is ready for immediate installation. It is released using a customized, encoded key and can be folded down to ground level, leaving the parking space free. It has an attractive slim line design in painted or stainless steel and is clearly visible during the night thanks to the use of refl ective stickers at car height.
POSTO 20 INOX stainless steelPOSTO 22 painted
Collapsible parking space marker
POSTO 20 INOXstainless steel
STRABUC series
• Stainless - painted steel
• Height of parking space marker: 920 mm
• Total weight: 11 Kg
Strabuc 918 Steady Strabuc 918 INOX Steady stainless steel
Strabuc 930 Steady
Weight 23 Kg Weight 23 Kg Weight 41 Kg
POSTO 22painted
-
VISUAL 344
Visual 344 is a service post in combination with automations for access and vehicle control mainly if located in open spaces (retractable traffi c control posts or traffi c barriers). Visual 344 allows the installation of control and safety accessories in the most convenient position for use.
New modular systemThe Visual 344 post is manufactured in treated, painted Fe steel and composed of cylindrical modules, each one with a door that allows clamping and protects against external tampering.The opening of the individual modules is guaranteed by a dedicated access key. The top module has a frontal aluminium panel, designed for on site installation of any control accessory (keyswitch, digital or badge-operated keypads, intercom devices, etc.).
Modular post housing electronic card readers, token-operated units, video intercom systems
Aluminium panel with RADI 12 digital button panel and intercom.
VISUAL 344 with optional customised intercom in a car park
catalogo_generale_11_gb 40catalogo_generale_11_gb 41catalogo_generale_11_gb 42catalogo_generale_11_gb 43catalogo_generale_11_gb 44catalogo_generale_11_gb 45catalogo_generale_11_gb 46catalogo_generale_11_gb 47catalogo_generale_11_gb 48catalogo_generale_11_gb 49catalogo_generale_11_gb 50catalogo_generale_11_gb 51catalogo_generale_11_gb 52