Product Standard Product DescriptionMIL-G-46003A Grease, RifleASTM D-4950 and NLGI Wheel Bearing Grease and Chassis Lubricant

Manufacturer Product NameAmsoil, Inc. Synthetic Multi-Purpose Grease GLCAmsoil, Inc. Synthetic Water Resistant Lithium Complex GreaseAmsoil, Inc. Universal Synthetic ATFArmor Holdings Break-Free ® CLPChevron Ulti-Plex ® Grease EPChevron Ulti-Plex ® Synthetic Grease EPChinese Petroleum Corp. High Temperature Lithium ComplexCRC Industries Sta-Lube ® Sta-PlexFiske Brothers Refining Lubriplate 130-A (formerly RG-62-A)Fiske Brothers Refining Lubriplate 630-2Fiske Brothers Refining Lubriplate 630-AFiske Brothers Refining Lubriplate 930-2Fiske Brothers Refining Lubriplate 930-AFiske Brothers Refining Lubriplate 1200-2Fiske Brothers Refining Lubriplate Synxtreme HD-2FTI, Inc. Tetra ®Havoline Texaco Starplex 2Henkel, Warren Refining PlastilubeJet-Lube CB-2/2Jet-Lube CB-2/3Jet-Lube AP-1/2Jet-Lube Jet-Plex EPLucas Oil Red "N" TackyLucas Oil X-tra Heavy Duty GreaseMD Labs XF7Mil-Comm Products Co. TW25BMilitec, Inc. Militec - 1 GreaseMilitec, Inc. Militec - 1 Metal ConditionerMobil Mobilith AW-2 (no longer made)Mobil Mobilith AW-3 (no longer made)Mobil Mobilith SHC 100Mobil Mobil 1 5W20 (bore cleaner)Mobil Mobil 1 Synthetic GreaseMobil XHP 222Mobil XHP 223Muscle Products Corp. PL-10Pennzoil 707L Red GreasePlews & Edelmann Red Lithium Complex Equipment Grease

Shell AeroShell Grease 22Shell / SOPUS Products Slick 50 ® One GreaseShell Formula Shell Dexron ® III / Mercon ® SKF Maintenance Products LGMT2SKF Maintenance Products LGWA2Steel Shield Technologies Lithi-Shield ™Valvoline DurablendValvoline General Multipurpose GreaseValvoline Multipurpose GMWashington Trading Co. Ballistol (cleaner, lubricant & protectant)

Product Type Base Lubricant Thickening Agentgrease mineral or synthetic oil jelling agentgrease mineral or synthetic oil not required

Product Type Base Lubricant Thickening Agentgrease synthetic lithium complexgrease synthetic lithium complextransmission fluid synthetic NAoil mineral oil NAgrease mineral oil lithium complexgrease synthetic lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complexgrease mineral oil calciumgrease mineral oil lithiumgrease mineral oil lithiumgrease mineral oil bentonite claygrease mineral oil bentonite claygrease mineral oil organic claygrease synthetic calcium sulfonategrease lithium complexgrease mineral oil lithium complexgrease mineral oil bentonite claygrease mineral oil lithiumgrease mineral oil lithiumgrease mineral oil bentonite claygrease mineral oil lithium complexgrease mineral oil lithiumgrease mineral oil polyureagreasegrease mineral oil calcium complexgrease mineral oil lithium complexoil synthetic NAgrease mineral oil lithium complexgrease mineral oil lithium complexgrease synthetic oil lithium complexengine oil synthetic oil NAgrease synthetic oil lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complex

grease synthetic bentonite claygrease mineral oil calcium complextransmission fluid petroleum NAgrease mineral oil lithium complexgrease mineral oil lithium complexgrease mineral oil lithium complexgrease semi-synthetic lithium complexgrease mineral oil lithiumgrease mineral oil lithium complexoil mineral oil NA

NLGI Grade NLGI Certificationnot specified not specified

1, 2 or 3 by definition GC-LB

NLGI Grade NLGI Certification2 GC-LB2 GC-LB

NA NANA NA

21 LB22 GC-LB

2.52

2.52

2.522 GC-LB22 GC-LB223222 GC-LB2 GC-LB

12

NA NA232

NA NA2 GC-LB2322 GC-LB2 GC-LB

22 GC-LB

NA NA2222 GC-LB2 LB2 GC-LB

NA NA

Viscosity ASTM D445 (100 F) Viscosity @ 212 F Pour Point ASTM D97 (deg F)108 to 172.6 cS not specified not specified

not required not required not required

Viscosity @ 104 F Viscosity @ 212 F Pour Point (deg F)151 cS 19.2 cS 0

-2033.5 cS 6.8 cS -61

14.0 cS minimum -65383 cS 25 cS344 cS 35.5 cS

15.8 cS220 cS 5135 cS 20135 cS 0135 cS 10135 cS 10135 cS 20183 cS 17 cS

90 to 100 cS -40

188 cS 19.4 cS 10

100 to 160 cS

414 to 506 cS140 to 200 cS

200 cS 18 cS145 cS 14.5 cS

-4543.4 cS 5.6 cS -45150 cS150 cS100 cS48.5 cS 8.8 cS -44220 cS 23.8 cS220 cS220 cS

167 to 178 cS 13.8 to 16.2 cS 0214 cS 15.7 cS

140 to 180 cS 13.5 to 16.5

30.5 cS 5.7 cS118 cS 12.5 cS34.3 cS 7.2 cS -45110 cS 11 cS185 cS 15 cS

130 cS 14.5 cS -18177 cS 15.4 cS -10151 cS 14.8 cS -1519.5 cS 1

Service Temperature (deg F) Drop Point ASTM D566 (deg F)35 to 100 190 minimum

not required 428 minimum

Service Temperature (deg F) Drop Point ASTM D2265 (deg F)550

> 50050 below 0 to 270 NA60 below 0 to 160 NA15 below 0 to 350 509

60 below to 455 59432 to 400 615

0 to 400 (300 continuous) > 50020 to 170 200

0 to 350 3800 to 350 3900 to 375 non-melt0 to 375 non-melt

25 below 0 to 350 > 400700

100 below 0 to 75040 below 0 to 350 51849 below 0 to 356 none18 below 0 to 300 390

0 to 550 non-melt0 to 500 550

5404 below 0 to 350 500

up to 500 continuous service554

0 to 500

0 to 347 5000 to 347 500

65 below 0 to 302 50940 below 0 to 400 NA40 below 0 to 302 550

to 284 536to 284 536

0 to 500 531to 325 500

to 350 (EM1110-2-1424) 500

90 below 0 to 400 500550NA

22 below 0 to 250 35622 below 0 to 284 482

55025 below 0 to 400 545

5 below 0 to 275 35040 below 0 to 400 530

NA

Flash Point ASTM D92 (deg F) Boiling Point (deg F)not specified not specifiednot required not required

Flash Point ASTM D92 (deg F) Boiling Point (deg F)450 580475 600432270525536

475 not determined400 > 550400 > 550400 > 550400 > 550400 > 550

388non-flammable > 428

> 430 < 600

> 560 > 700> 430> 320> 374

> 1000 > 1000475482 662410 528

> 392 > 600> 392 > 600> 400 > 600> 392 not determined> 399 > 570> 400 > 600> 475 > 600

475 500

455374399

> 302> 302

495 > 700475440 649450 700126 262

Work Penetration ASTM D217 Water Resistance ASTM D1264 (%) 220 to 270 4.0 maximum220 to 340 15.0 maximum

Work Penetration ASTM D217 Water Resistance ASTM D1264 (%)265 to 295 1.8265 to 295 3.5

NANA

280 4315272 1.9

265 to 295 5235 to 260 < or = 4.0265 to 295 3.5235 to 260 not tested but manufacturer expects < 3.5265 to 295235 to 260 7.3

277 < 5280 < 0.5

280

265 to 295 5expected to be < 5

265 to 295 0.8265 to 295

280 < 5285 10

315 1265 to 295

NA280235280 6NA

280 6280 5235 5

260 to 280 3 to 8280 4.1

275 0.5285NA

265 to 295 1 maximum per DIN 51 807/1265 to 295 1 maximum per DIN 51 807/1

2.7275278279NA

Rust Prevention ASTM D17432 maximum1 maximum

Rust Prevention ASTM D1743passpass

passpasspass

1pass

passpass

passpasspasspass

passpasspass

pass

pass

passpasspass

Additives"with or without added materials"typically will have anti-wear, corrosion inhibitor, oxidation inhibitor

Additivesanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitor (zinc compounds)anti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitorproprietaryPTFE, polyalphaolefinanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, corrosion inhibitor, oxidation inhibitorzinc dialkyl dithiophosphate, sulfurized methyl propeneanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitorPTFEzinc dialkyldithiophosphate, oxidation inhibitor

anti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitororganicsanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitorextreme pressure, corrosion inhibitor, oxidation inhibitorextreme pressure, corrosion inhibitor, oxidation inhibitor

fluoropolymer other than PTFE, phosphate ester, synthetic esterspolybutene, antimony dialkyldidithiocarbamate, dimethylbenzene, synthetic ester

zinc dialkyl dithiophosphatezinc dialkyl dithiophosphatezinc dialkyl dithiophosphate, zinc neodecanoate, diphenylaminediphenylamine zinc dithiophosphate, oxidation inhibitorphosphorodithoic acid, alkyl esters, zinc dialkyl dithiophosphatezinc dialkyl dithiophosphateantimony dialkyldithiocarbamate, zinc oxide, proprietary organic hydrocarbonanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitor

anti-wear, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure (PTFE), corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitorzinc napthenate, diphenylaminezinc dialkyl dithiophosphate, diphenylaminezinc oxide, extreme pressureanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitoranti-wear, extreme pressureanti-wear, extreme pressure, corrosion inhibitor, oxidation inhibitorcorrosion inhibitor, oxidation inhibitor

Copper Corrosion Resistance FED-STD-791-D method 5309.5No green color, pitting, etching, or black or brown stain after washing with hexaneASTM D4048 not required, FED-STD-791 FTM 5309 is equivalent to ASTM D4048

Copper Corrosion Resistance1B per ASTM D4048

1B per ASTM D40481B per ASTM D40481A per ASTM D4048

meets MIL-G-46003A

meets MIL-G-46003A

1A per ASTM D4048

1B per ASTM D4048

0 per ASTM D6138

pass per ASTM D4048pass per ASTM D4048

2 maximum per DIN 51 8112 maximum per DIN 51 811

Test Methods Description Required for NLGI LB? D92 Flash Point NOD97 Pour Point NOD217 Penetration YESD445 Viscosity NOD566 or D2265 Dropping Point YESD942 Oxidation Stability NOD1264 Water Washout NOD1742 Oil Separation YESD1743 Rust Protection YESD2266 Four Ball Wear YESD2509 Timken OK Load NOD2596 Four Ball Exteme Pressure YESD3527 High Temperature Life NOD4048 or FED-STD-791 FTM 5309 Corrosion Resistance NOD4049 Water Spray Off NOD4170 Fretting Wear YESD4289 Elastomer Compatibility YESD4290 Leakage NOD4693 Low Temperature Torque YES

Required for NLGI GC? NLGI Specification MIL-G-46003A SpecificationNO none noneNO none noneYES 220 to 340 220 to 270NO none 108 to 172.6 cS @ 100 deg FYES 428 degrees F 190 degrees FNO none noneYES 15 % maximum 4 % maximumYES 6 % maximum noneYES 1 maximum 2 maximumYES 0.6 mm maximum noneNO none noneYES 200 kgf min weld point noneYES 80 hours minimum noneNO none none NO none noneNO 10 Mg maximum noneYES 0 to +30 % volume change noneYES 10 grams maximum noneYES 15.5 N-m maximum none

NLGI # 2 LB-GC okay for M14?YESYES

YESCheck product data

YESYES

Check product dataYESYESYESYESYESYES

YES due to additivesYESYESYESYESYES

Different's Grease Picks Product Name Comments1 Valvoline Multipurpose GM best value, easy to find2 Valvoline Durablend easily available3 Amsoil Snythetic Multi-purpose Grease GLC great ASTM test results4 Lubriplate 630-2 service down to 0 deg F5 Lubriplate 630-A what Different uses6 Henkel / ATE Plastilue USGI, pricey7 Lubriplate 130-A USGI, old stand by

Source Size and Mfr Part Number Price as of January 20101 lb can VV614 $3.99 1 lb can VV278 $4.99 8 oz tube GLCTB-EA $5.85 14 oz can L0072-001 $7.22 14 oz can L0066-001 $7.22 75 ml tube $9.50 14 oz can L0043-001 $16.68

www.autozone.comwww.autozone.comwww.amsoil.comwww.motionindustries.comwww.motionindustries.comwww.bimmerworld.comwww.brownells.com

Property Test MethodAPI Gravity ASTM D287Specific Gravity @ 60 deg FWeight @ 60 deg F (pounds per gallon)Color ASTM D1500Pour Point (deg F) ASTM D97Viscosity @ 104 deg F ASTM D445Viscosity @ - 40 deg F ASTM D445Viscosity @ - 65 deg F ASTM D445Flash Point (deg F) ASTM D92Precipitation Number (ml) ASTM D91Evaporation Loss, 22 hours @ 212 deg F (% weight) ASTM D972Copper Strip Corrosion, 3 hours @ 212 deg F ASTM D130Humidity Cabinet - SB Panels, 192 hours ASTM D1748Water Displacement / Water Stability FED-STD-791 FTM 3007Low Temperature Stability, 72 hours @ - 65 deg F FED-STD-791 FTM 3458Corrosiveness, 10 days (240 grit) FED-STD-791 FTM 5322Film Characteristics MIL-PRF-32033 A2Removability MIL-PRF-32033 A2Four Ball Wear Test, AWSD (mm) ASTM D4172Workmanship MIL-PRF-32033Corrosion-Oxidation Stability, 168 hours @ 250 deg F ASTM D4636Corrosion, Pitting, or Etching Weight Change (mg/cm2) - Copper ASTM D4636Corrosion, Pitting, or Etching Weight Change (mg/cm2) - Steel ASTM D4636Corrosion, Pitting, or Etching Weight Change (mg/cm2) - Aluminum ASTM D4636Corrosion, Pitting, or Etching Weight Change (mg/cm2) - Magnesium ASTM D4636Corrosion, Pitting, or Etching Weight Change (mg/cm2) - Cadmium ASTM D4636Change in Viscosity @ 104 deg F (%) ASTM D445Change in Neutralization Number ASTM D974Insoluble Materials and Gum ASTM D4636

Product Identification

MIL-PRF-32033 A2 Requirement Castrol Brayco ® 300none 28.4none 0.8849none 7.3687.0 maximum 470 below zero maximum 70 below zero11 cSt minimum 11.27,000 cSt maximum 4,29060,000 cSt maximum 53,100275 minimum 2850.05 maximum 0.0125 maximum 11.22a maximum 1aPass PassPass / Pass Pass / PassPass Passnone PassPass PassPass Pass1 maximum 0.7none Pass per MIL-PRF-32033none none0.2 maximum 0.0020.2 maximum 0.0120.2 maximum -0.0090.2 maximum 0.0090.2 maximum 0.0085 below zero to + 20 4.30.20 maximum 0.06none none

QPL-32033 NSN 9150-00-273-2389