EXT-0086-R00-01082020 (LTR) 1/13

O +1 604 273 2665 F +1 604 273 2660 T +1 844 455 4448 W cooledgelighting.com

Cooledge Lighting Inc. 110-13551 Commerce Parkway Richmond, BC V6V 2L1 Canada

Cooledge Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.

For detailed instructions,please refer to: EXT-0071 COOLEDGE CONTROL MODULE USER GUIDEAvaliable atcooledgelighting.com

Control Module is suitable for use in dry locations only (IP20). Damage to CONTROL MODULE and/or light sheets may occur if wired incorrectly.

All devices should always be disconneced from mains power supply and verify its absence prior to installation/maintenance.

FCC STATEMENT:This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.

CONTROL MODULE must be installed by a qualified electrician.

90W 90W 90W 90W

58V*

AC

POWER SUPPLY (PSU)

CONTROLMODULE

DALI

* For use with 58VDC power supplies ONLY.

COOLEDGE POWER & CONTROL - USER GUIDE

DALI CONTROL

Compatible Part No’s Mode

CTR-SCT-DAL-58V Static Color Temperature SCT (Page 4)

CTR-TNW-DAL-58V Tunable White TNW (Page 5)

CTR-DTW-DAL-58V Dim-To-Warm DTW (Page 6)

5 Year Limited Warranty: Parts and workmanship

E354088 E354088

E354088

E35408858VDC

E354088LISTED

Tc

55 YE

AR WARRANTY

5 YEAR WARRANTY

™

™

EXT-0086-R00-01082020 (LTR) 2/13

cUL Listed 58V Control Module 100W PSU* 200W PSU 400 PSU

Dimensions (in) 8.7 x 2.6 x 1.4 11 x 4 x 3 9.6 x 2.8 x 1.5 16.0 x 4.9 x 1.7

CE Compliant 58V Control Module 100W PSU 200W PSU 400 PSU

Dimensions (mm) 220 x 66 x 36 199 x 63 x 35 244 x 71 x 38 407 x 124 x 43

INPUT POWER - 58VDC: 100W / 200W / 400W - SELV

1) Fasten module in position by using the two mounting slots. (Fasteners not supplied)

2) Terminal covers support 1/2” strain relief of conduit. Conduit or armoured cable must be used on power input cable.

3) Thread cables through conduit/strain reliefs and covers; then make connections as required.

4) Snap covers in position and secure with provided fasteners.

* The 100W PSU (58V) cUL version is not compatible with Cooledge Control Modules.

MOUNTING COOLEDGE CONTROL MODULE

Please refer to EXT-0071 Cooledge Control Module User Guide for more information regarding the status LED indicator.

(+) 58VDC

(-) GND

PSU 58V100/200/400W

Status LED

PSU 58V400W

+-

+

-

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

Optional wiring methods for TNW and DTW installations using the 400W 58V PSU.

EXT-0086-R00-01082020 (LTR) 3/13

INTRODUCTION TO COOLEDGE CONTROL MODULE

The Cooledge Control Module receives a single DC power input from a constant voltage power supply 58V and converts it into up to 4 controlled output channels of max. 90W each. Input signals from 3rd party controllers are used to control dimming and CCT tuning (if applicable). The control protocol required to interface with the controller determines which Control Module product model is required: DALI (0/1-10V), DMX, or Wireless (Casambi).

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

Output Channeland Power Input Cover

DIP SwitchCover

Controls InputCover

OutputChannels

Status LED

PowerInput

Mode and Addressing DIP Switch

Wireless Card

0/1 - 10VInputs

DALIInputs

0-1

0V

INPU

TD

ALI

To access the DIP switches for selecting the operational mod, unfasten the cover screw and rotate cover out of the way.Positions 1-3 are used to identify the controller mode. Settings for each mode are explained in each section.

- Switches 1 - 3: Control Module MODE

EXT-0086-R00-01082020 (LTR) 4/13

STATIC COLOR TEMPERATURE (SCT)

CONTROL INPUTS: DALI

Static color temperature is a mode in the Control Module used for controlling the dimming features of the following Cooledge products, having a fixed color temperature:TILE Interior, TILE Exterior, and LINE. There are 4 output channels, each channel can handle up to a 90W load.

DALI OUTPUTDADA

DALI INPUTDADA

0-1

0V

INP

UT

DA

LI

*Factory set.DIP switch setting can be adjusted if another dimming curve is required.See APPENDIX A for available dimming curves.Warning! Changing DIP Switch Setting must be performed only after unit is powered down.

LOG MODE LIN MODE

Dimming Protocol Mode Switches 1-3 (Log)* Mode Switches 1-3 (Linear)

0/1 - 10V SCT 0-0-0 0-0-1

OUTPUT CONNECTIONS: STATIC COLOR TEMPERATURE (SCT)

PSU 58V:100/200/400W

CH4

CH3

CH2

CH1+-+-+-+-

CH4: 90W CH3: 90W

CH2: 90W CH1: 90WRED OR WHITE

BLACKRED OR WHITE

BLACKRED OR WHITE

BLACKRED OR WHITE

BLACK

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

PSU 58V:100/200/400W

CH3: 90W

BLACK

Relevant Part No’s:CTR-SCT-DAL-58V

- Switches 1 - 3: Control Module MODE

DALI OUTPUTDADA

DALI INPUTDADA

DA

LI

DALI OUTPUTDADA

DALI INPUTDADA

GND

GND

D-

D-

D+

D+

EXT-0086-R00-01082020 (LTR) 5/13

PSU 58V100/200W

CH 1 & 2: 90W

CH 3 & 4: 90W CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

RED OR WHITE

BLACK

RED OR WHITE

BLACK

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

CH 3 & 4

CH 1 & 2

TUNABLE WHITE (TNW)

CONTROL INPUTS: DALI

Tunable White is a mode in the Control Module to be used in conjunction with TILE Tunable White. Powering the controller in this mode can be done with 58V 100W/200W/400W drivers. A 400W driver can power up to 2 Control Modules

DALI OUTPUTDADA

DALI INPUTDADA

0-1

0V

INP

UT

DA

LI

See dimming curve for Tunable White Mode in APPENDIX B.Warning! Changing DIP Switch Setting must be performed only after unit is powered down

Dimming Protocol Mode Switches 1-3

0/1 - 10V TNW 0-1-0

- Switches 1 - 3: Control Module MODE

OUTPUT CONNECTIONS: TUNABLE WHITE (TNW) & DIM-TO-WARM (DTW)

Relevant Part No’s:CTR-TNW-DAL-58V CTR-DTW-DAL-58V

DALI OUTPUTDADA

DALI INPUTDADA

DA

LI

DALI OUTPUTDADA

DALI INPUTDADA

GND

GND

D-

D-

D+

D+

EXT-0086-R00-01082020 (LTR) 6/13

DIM-TO-WARM (DTW)

Dim-to-Warm is a mode in the Control Module to be used in conjunction with the Dim-to-Warm option of TILE Tunable White.In this mode the CCT will adjust from 2200K at lowest dim setting to 3500K at the highest dim setting. This mode can be used with 58V *100/200/400W systems. A 400W driver can power up to 2 Control ModulesCONTROL INPUTS: 0/1-10V DTW

- Switches 1 - 3: Control Module MODE

Warning! Changing DIP Switch Setting must be performed only after unit is powered down.

3600

3400

3200

3000

2800

2600

2400

22000% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Dim Level

CCT

(K)

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

RED OR WHITE

BLACK

RED OR WHITE

BLACK

CH 1+ CH 1- CH 2+ CH 2- CH 3+

CH 4+ CH 3-

CH 4-

+VIN GND

OUTPUTS

CH 1 & 2: 90W

PSU 58V100/200W

CH 3 & 4: 90W

Figure 1: Dim Inputs vs CCT Output

CH 3 & 4

CH 1 & 2

Dimming Protocol Mode Switches 1-3

0-10V DTW 0-1-1

DALI OUTPUTDADA

DALI INPUTDADA

0-1

0V

INP

UT

DA

LI

DALI OUTPUTDADA

DALI INPUTDADA

DA

LI

DALI OUTPUTDADA

DALI INPUTDADA

GND

GND

D-

D-

D+

D+

-

-

EXT-0086-R00-01082020 (LTR) 7/13

DALI ADDRESSING

Cooledge DALI Controller is compatible with DALI 1 Standard, and is able to report back through a DALI compliant master supporting DT6 devices.

- DALI 1 compatible:• IEC 62386-102:2014 (Digital addressable lighting interface – Part 102: General requirements – Control gear

• IEC 62386 – 207:2009 (Digital addressable lighting interface – Part 207: Particular requirements for control gear – LED modules (Device Type 6)

- DO NOT USE this controller with DALI Masters that support DT8 devices!- On DALI bus, when commissioned, each Control Module unit will occupy 4 subsequent DALI addresses.- A total of 64 DALI addresses are allowed on a DALI bus, for a maximum of 16 Control Modules.- The 64 DALI addresses are numbered from “0” to “63”.- DALI polarity free, opto-isolated interface.- DALI bus voltage must be present before the Cooledge DALI controller powers on. If the bus is not powered before the Control Module the controller will default to 0-10V input and not register DALI inputs.

Static Color Temperature (SCT) DALI Addressing Tunable White (TNW) DALI Addressing

Dim-To-Warm (DTW) DALI Addressing

Channel FunctionA ddress

1D N

2D N+1

N+2

N+3

Example:

A Control Module in SCT Mode when commissioned with addresses 4, 5, 6, and 7:Address 4 - DIM SCT CH1Address 5 - DIM SCT CH2Address 6 - DIM SCT CH3Address 7 - DIM SCT CH4

A Control Module in TNW Mode when commissioned with addresses 4, 5, 6, and 7:Address 4 - DIM TNW CH1Address 5 - CCT TNW CH1Address 6 - DIM TNW CH2Address 7 - CCT TNW CH2

A Control Module in DTW Mode when commissioned with addresses 4, 5, 6, and 7:Address 4 - DIM TNW CH1Address 5 - DIM TNW CH2Address 6 - Not usedAddress 7 - Not used

Channel FunctionA ddress

1D N

2D N+1

3D N+2

4D N+3

System FunctionA ddress

1D N

1 N+1

2D N+

N+

2

2 +3

DIM Channel 1

DIM Channel 2

DIM Channel 3

DIM Channel 4

DTW System 1

DTW System 2

Not Used

Not Used

-

-

DIM System 1

CCT System 1

DIM System 2

CCT System 2

EXT-0086-R00-01082020 (LTR) 8/13

STANDALONE MODE

Standalone mode gives a pre-defined user -selectable fixed dimming and/or color output. No external control input is required.When one of the operational modes (Standalone or Dynamic Test) is selected through the DIP Switch setting, the module will ignore DALI commands and operate according to the settings, in either LOG or LINEAR MODE.

There are two modes that follow the dimming curves presented in Appendix A.

X = IGNOREDChoose the DIP Switch settings from the tables below to achieve the desired dimming level.

STANDALONE SCT MODE

Standalone SCT Mode Switches 1-3 Switches 4-12 (Intensity)

Fixed Dimming Level - LOG 1-0-0 X-X-X-X-X-X-X-X-0

Fixed Dimming Level - LINEAR 1-0-0 X-X-X-X-X-X-X-X-1

LOGARITMIC DIP SETTINGS/DIMMING LEVELS FOR STANDALONE SCT

Level01234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950

DIP SETTING000000000 0 0 0 0 0 0 10 0 0 0 0 0 1 00 0 0 0 0 0 1 10 0 0 0 0 1 0 00 0 0 0 0 1 0 10 0 0 0 0 1 1 00 0 0 0 0 1 1 10 0 0 0 1 0 0 00 0 0 0 1 0 0 10 0 0 0 1 0 1 00 0 0 0 1 0 1 10 0 0 0 1 1 0 00 0 0 0 1 1 0 10 0 0 0 1 1 1 00 0 0 0 1 1 1 10 0 0 1 0 0 0 00 0 0 1 0 0 0 10 0 0 1 0 0 1 00 0 0 1 0 0 1 10 0 0 1 0 1 0 00 0 0 1 0 1 0 10 0 0 1 0 1 1 00 0 0 1 0 1 1 10 0 0 1 1 0 0 00 0 0 1 1 0 0 10 0 0 1 1 0 1 00 0 0 1 1 0 1 10 0 0 1 1 1 0 00 0 0 1 1 1 0 10 0 0 1 1 1 1 00 0 0 1 1 1 1 10 0 1 0 0 0 0 00 0 1 0 0 0 0 10 0 1 0 0 0 1 00 0 1 0 0 0 1 10 0 1 0 0 1 0 00 0 1 0 0 1 0 10 0 1 0 0 1 1 00 0 1 0 0 1 1 10 0 1 0 1 0 0 00 0 1 0 1 0 0 10 0 1 0 1 0 1 00 0 1 0 1 0 1 10 0 1 0 1 1 0 00 0 1 0 1 1 0 10 0 1 0 1 1 1 00 0 1 0 1 1 1 10 0 1 1 0 0 0 00 0 1 1 0 0 0 10 0 1 1 0 0 1 0

Output(%)0

0.1000.1030.1060.1090.1120.1150.1180.1210.1240.1280.1310.1350.1390.1430.1470.1510.1550.1590.1630.1680.1730.1770.1820.1870.1930.1980.2030.2090.2150.2210.2270.2330.2400.2460.2530.2600.2670.2750.2820.2900.2980.3060.3150.3240.3320.3420.3510.3610.3710.381

Level51525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101

Output(%)0.3920.4020.4140.4250.4370.4490.4610.4740.4870.5010.5150.5290.5430.5590.5740.5900.6060.6230.6400.6580.6760.6950.7140.7340.7540.7750.7960.8190.8410.8640.8880.9130.9380.9640.9911.0181.0471.0761.1051.1361.1671.2001.2331.2671.3021.3381.3751.4131.4521.4921.534

DIP SETTING0 0 1 1 0 0 1 10 0 1 1 0 1 0 00 0 1 1 0 1 0 10 0 1 1 0 1 1 00 0 1 1 0 1 1 10 0 1 1 1 0 0 00 0 1 1 1 0 0 10 0 1 1 1 0 1 00 0 1 1 1 0 1 10 0 1 1 1 1 0 00 0 1 1 1 1 0 10 0 1 1 1 1 1 00 0 1 1 1 1 1 10 1 0 0 0 0 0 00 1 0 0 0 0 0 10 1 0 0 0 0 1 00 1 0 0 0 0 1 10 1 0 0 0 1 0 00 1 0 0 0 1 0 10 1 0 0 0 1 1 00 1 0 0 0 1 1 10 1 0 0 1 0 0 00 1 0 0 1 0 0 10 1 0 0 1 0 1 00 1 0 0 1 0 1 10 1 0 0 1 1 0 00 1 0 0 1 1 0 10 1 0 0 1 1 1 00 1 0 0 1 1 1 10 1 0 1 0 0 0 00 1 0 1 0 0 0 10 1 0 1 0 0 1 00 1 0 1 0 0 1 10 1 0 1 0 1 0 00 1 0 1 0 1 0 10 1 0 1 0 1 1 00 1 0 1 0 1 1 10 1 0 1 1 0 0 00 1 0 1 1 0 0 10 1 0 1 1 0 1 00 1 0 1 1 0 1 10 1 0 1 1 1 0 00 1 0 1 1 1 0 10 1 0 1 1 1 1 00 1 0 1 1 1 1 10 1 1 0 0 0 0 00 1 1 0 0 0 0 10 1 1 0 0 0 1 00 1 1 0 0 0 1 10 1 1 0 0 1 0 00 1 1 0 0 1 0 1

DIP SETTING0 1 1 0 0 1 1 00 1 1 0 0 1 1 10 1 1 0 1 0 0 00 1 1 0 1 0 0 10 1 1 0 1 0 1 00 1 1 0 1 0 1 10 1 1 0 1 1 0 00 1 1 0 1 1 0 10 1 1 0 1 1 1 00 1 1 0 1 1 1 10 1 1 1 0 0 0 00 1 1 1 0 0 0 10 1 1 1 0 0 1 00 1 1 1 0 0 1 10 1 1 1 0 1 0 00 1 1 1 0 1 0 10 1 1 1 0 1 1 00 1 1 1 0 1 1 10 1 1 1 1 0 0 00 1 1 1 1 0 0 10 1 1 1 1 0 1 00 1 1 1 1 0 1 10 1 1 1 1 1 0 00 1 1 1 1 1 0 10 1 1 1 1 1 1 00 1 1 1 1 1 1 11 0 0 0 0 0 0 01 0 0 0 0 0 0 11 0 0 0 0 0 1 01 0 0 0 0 0 1 11 0 0 0 0 1 0 01 0 0 0 0 1 0 11 0 0 0 0 1 1 01 0 0 0 0 1 1 11 0 0 0 1 0 0 01 0 0 0 1 0 0 11 0 0 0 1 0 1 01 0 0 0 1 0 1 11 0 0 0 1 1 0 01 0 0 0 1 1 0 11 0 0 0 1 1 1 01 0 0 0 1 1 1 11 0 0 1 0 0 0 01 0 0 1 0 0 0 11 0 0 1 0 0 1 01 0 0 1 0 0 1 11 0 0 1 0 1 0 01 0 0 1 0 1 0 11 0 0 1 0 1 1 01 0 0 1 0 1 1 11 0 0 1 1 0 0 0

Level102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152

Level153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203

Output(%)6.3446.5206.7006.8867.0767.2727.4737.6807.8938.111

8.3368.5678.8049.0479.2989.5559.82010.09110.37110.65810.95311.25611.56811.88812.21712.55512.90213.26013.62714.00414.39114.79015.19915.62016.05216.49616.95317.42217.90518.40018.90919.43319.971

20.52421.09221.67522.27522.89223.52624.17724.846

Level204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254

Output(%)25.53426.24126.96727.713

28.48029.26930.07930.91131.76732.64633.55034.47935.43336.41437.42238.45739.52240.61641.74042.89544.08345.30346.55747.84649.17050.53151.93053.36754.84456.36257.92259.52661.173

62.86664.60766.39568.23370.121

72.06274.05776.10778.21380.37882.60384.88987.23989.65492.13594.68697.307

100.000

Output(%)1.5761.6201.6651.711

1.7581.8071.8571.9081.9612.0152.0712.1282.1872.2482.3102.3742.4402.5072.5772.6482.7212.7972.8742.9543.0353.119

3.2063.2943.3863.4793.5763.6753.7763.8813.9884.0994.2124.3294.4494.5724.6984.8284.9625.0995.2405.3855.5355.6885.8456.0076.173

DIP SETTING1 1 0 0 1 1 0 01 1 0 0 1 1 0 11 1 0 0 1 1 1 01 1 0 0 1 1 1 11 1 0 1 0 0 0 01 1 0 1 0 0 0 11 1 0 1 0 0 1 01 1 0 1 0 0 1 11 1 0 1 0 1 0 01 1 0 1 0 1 0 11 1 0 1 0 1 1 01 1 0 1 0 1 1 11 1 0 1 1 0 0 01 1 0 1 1 0 0 11 1 0 1 1 0 1 01 1 0 1 1 0 1 11 1 0 1 1 1 0 01 1 0 1 1 1 0 11 1 0 1 1 1 1 01 1 0 1 1 1 1 11 1 1 0 0 0 0 01 1 1 0 0 0 0 11 1 1 0 0 0 1 01 1 1 0 0 0 1 11 1 1 0 0 1 0 01 1 1 0 0 1 0 11 1 1 0 0 1 1 01 1 1 0 0 1 1 11 1 1 0 1 0 0 01 1 1 0 1 0 0 11 1 1 0 1 0 1 01 1 1 0 1 0 1 11 1 1 0 1 1 0 01 1 1 0 1 1 0 11 1 1 0 1 1 1 01 1 1 0 1 1 1 11 1 1 1 0 0 0 01 1 1 1 0 0 0 11 1 1 1 0 0 1 01 1 1 1 0 0 1 11 1 1 1 0 1 0 01 1 1 1 0 1 0 11 1 1 1 0 1 1 01 1 1 1 0 1 1 11 1 1 1 1 0 0 01 1 1 1 1 0 0 11 1 1 1 1 0 1 01 1 1 1 1 0 1 11 1 1 1 1 1 0 01 1 1 1 1 1 0 11 1 1 1 1 1 1 0

DIP SETTING1 0 0 1 1 0 0 11 0 0 1 1 0 1 01 0 0 1 1 0 1 11 0 0 1 1 1 0 01 0 0 1 1 1 0 11 0 0 1 1 1 1 01 0 0 1 1 1 1 11 0 1 0 0 0 0 01 0 1 0 0 0 0 11 0 1 0 0 0 1 01 0 1 0 0 0 1 11 0 1 0 0 1 0 01 0 1 0 0 1 0 11 0 1 0 0 1 1 01 0 1 0 0 1 1 11 0 1 0 1 0 0 01 0 1 0 1 0 0 11 0 1 0 1 0 1 01 0 1 0 1 0 1 11 0 1 0 1 1 0 01 0 1 0 1 1 0 11 0 1 0 1 1 1 01 0 1 0 1 1 1 11 0 1 1 0 0 0 01 0 1 1 0 0 0 11 0 1 1 0 0 1 01 0 1 1 0 0 1 11 0 1 1 0 1 0 01 0 1 1 0 1 0 11 0 1 1 0 1 1 01 0 1 1 0 1 1 11 0 1 1 1 0 0 01 0 1 1 1 0 0 11 0 1 1 1 0 1 01 0 1 1 1 0 1 11 0 1 1 1 1 0 01 0 1 1 1 1 0 11 0 1 1 1 1 1 01 0 1 1 1 1 1 11 1 0 0 0 0 0 01 1 0 0 0 0 0 11 1 0 0 0 0 1 01 1 0 0 0 0 1 11 1 0 0 0 1 0 01 1 0 0 0 1 0 11 1 0 0 0 1 1 01 1 0 0 0 1 1 11 1 0 0 1 0 0 01 1 0 0 1 0 0 11 1 0 0 1 0 1 01 1 0 0 1 0 1 1

EXT-0086-R00-01082020 (LTR) 9/13

LINEAR DIP SETTINGS/DIMMING LEVELS FOR STANDALONE SCT

Level01234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950

DIP SETTING000000000 0 0 0 0 0 0 10 0 0 0 0 0 1 00 0 0 0 0 0 1 10 0 0 0 0 1 0 00 0 0 0 0 1 0 10 0 0 0 0 1 1 00 0 0 0 0 1 1 10 0 0 0 1 0 0 00 0 0 0 1 0 0 10 0 0 0 1 0 1 00 0 0 0 1 0 1 10 0 0 0 1 1 0 00 0 0 0 1 1 0 10 0 0 0 1 1 1 00 0 0 0 1 1 1 10 0 0 1 0 0 0 00 0 0 1 0 0 0 10 0 0 1 0 0 1 00 0 0 1 0 0 1 10 0 0 1 0 1 0 00 0 0 1 0 1 0 10 0 0 1 0 1 1 00 0 0 1 0 1 1 10 0 0 1 1 0 0 00 0 0 1 1 0 0 10 0 0 1 1 0 1 00 0 0 1 1 0 1 10 0 0 1 1 1 0 00 0 0 1 1 1 0 10 0 0 1 1 1 1 00 0 0 1 1 1 1 10 0 1 0 0 0 0 00 0 1 0 0 0 0 10 0 1 0 0 0 1 00 0 1 0 0 0 1 10 0 1 0 0 1 0 00 0 1 0 0 1 0 10 0 1 0 0 1 1 00 0 1 0 0 1 1 10 0 1 0 1 0 0 00 0 1 0 1 0 0 10 0 1 0 1 0 1 00 0 1 0 1 0 1 10 0 1 0 1 1 0 00 0 1 0 1 1 0 10 0 1 0 1 1 1 00 0 1 0 1 1 1 10 0 1 1 0 0 0 00 0 1 1 0 0 0 10 0 1 1 0 0 1 0

Level51525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101

DIP SETTING0 0 1 1 0 0 1 10 0 1 1 0 1 0 00 0 1 1 0 1 0 10 0 1 1 0 1 1 00 0 1 1 0 1 1 10 0 1 1 1 0 0 00 0 1 1 1 0 0 10 0 1 1 1 0 1 00 0 1 1 1 0 1 10 0 1 1 1 1 0 00 0 1 1 1 1 0 10 0 1 1 1 1 1 00 0 1 1 1 1 1 10 1 0 0 0 0 0 00 1 0 0 0 0 0 10 1 0 0 0 0 1 00 1 0 0 0 0 1 10 1 0 0 0 1 0 00 1 0 0 0 1 0 10 1 0 0 0 1 1 00 1 0 0 0 1 1 10 1 0 0 1 0 0 00 1 0 0 1 0 0 10 1 0 0 1 0 1 00 1 0 0 1 0 1 10 1 0 0 1 1 0 00 1 0 0 1 1 0 10 1 0 0 1 1 1 00 1 0 0 1 1 1 10 1 0 1 0 0 0 00 1 0 1 0 0 0 10 1 0 1 0 0 1 00 1 0 1 0 0 1 10 1 0 1 0 1 0 00 1 0 1 0 1 0 10 1 0 1 0 1 1 00 1 0 1 0 1 1 10 1 0 1 1 0 0 00 1 0 1 1 0 0 10 1 0 1 1 0 1 00 1 0 1 1 0 1 10 1 0 1 1 1 0 00 1 0 1 1 1 0 10 1 0 1 1 1 1 00 1 0 1 1 1 1 10 1 1 0 0 0 0 00 1 1 0 0 0 0 10 1 1 0 0 0 1 00 1 1 0 0 0 1 10 1 1 0 0 1 0 00 1 1 0 0 1 0 1

DIP SETTING0 1 1 0 0 1 1 00 1 1 0 0 1 1 10 1 1 0 1 0 0 00 1 1 0 1 0 0 10 1 1 0 1 0 1 00 1 1 0 1 0 1 10 1 1 0 1 1 0 00 1 1 0 1 1 0 10 1 1 0 1 1 1 00 1 1 0 1 1 1 10 1 1 1 0 0 0 00 1 1 1 0 0 0 10 1 1 1 0 0 1 00 1 1 1 0 0 1 10 1 1 1 0 1 0 00 1 1 1 0 1 0 10 1 1 1 0 1 1 00 1 1 1 0 1 1 10 1 1 1 1 0 0 00 1 1 1 1 0 0 10 1 1 1 1 0 1 00 1 1 1 1 0 1 10 1 1 1 1 1 0 00 1 1 1 1 1 0 10 1 1 1 1 1 1 00 1 1 1 1 1 1 11 0 0 0 0 0 0 01 0 0 0 0 0 0 11 0 0 0 0 0 1 01 0 0 0 0 0 1 11 0 0 0 0 1 0 01 0 0 0 0 1 0 11 0 0 0 0 1 1 01 0 0 0 0 1 1 11 0 0 0 1 0 0 01 0 0 0 1 0 0 11 0 0 0 1 0 1 01 0 0 0 1 0 1 11 0 0 0 1 1 0 01 0 0 0 1 1 0 11 0 0 0 1 1 1 01 0 0 0 1 1 1 11 0 0 1 0 0 0 01 0 0 1 0 0 0 11 0 0 1 0 0 1 01 0 0 1 0 0 1 11 0 0 1 0 1 0 01 0 0 1 0 1 0 11 0 0 1 0 1 1 01 0 0 1 0 1 1 11 0 0 1 1 0 0 0

Level102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152

Level153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203

Level204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254

DIP SETTING1 1 0 0 1 1 0 01 1 0 0 1 1 0 11 1 0 0 1 1 1 01 1 0 0 1 1 1 11 1 0 1 0 0 0 01 1 0 1 0 0 0 11 1 0 1 0 0 1 01 1 0 1 0 0 1 11 1 0 1 0 1 0 01 1 0 1 0 1 0 11 1 0 1 0 1 1 01 1 0 1 0 1 1 11 1 0 1 1 0 0 01 1 0 1 1 0 0 11 1 0 1 1 0 1 01 1 0 1 1 0 1 11 1 0 1 1 1 0 01 1 0 1 1 1 0 11 1 0 1 1 1 1 01 1 0 1 1 1 1 11 1 1 0 0 0 0 01 1 1 0 0 0 0 11 1 1 0 0 0 1 01 1 1 0 0 0 1 11 1 1 0 0 1 0 01 1 1 0 0 1 0 11 1 1 0 0 1 1 01 1 1 0 0 1 1 11 1 1 0 1 0 0 01 1 1 0 1 0 0 11 1 1 0 1 0 1 01 1 1 0 1 0 1 11 1 1 0 1 1 0 01 1 1 0 1 1 0 11 1 1 0 1 1 1 01 1 1 0 1 1 1 11 1 1 1 0 0 0 01 1 1 1 0 0 0 11 1 1 1 0 0 1 01 1 1 1 0 0 1 11 1 1 1 0 1 0 01 1 1 1 0 1 0 11 1 1 1 0 1 1 01 1 1 1 0 1 1 11 1 1 1 1 0 0 01 1 1 1 1 0 0 11 1 1 1 1 0 1 01 1 1 1 1 0 1 11 1 1 1 1 1 0 01 1 1 1 1 1 0 11 1 1 1 1 1 1 0

DIP SETTING1 0 0 1 1 0 0 11 0 0 1 1 0 1 01 0 0 1 1 0 1 11 0 0 1 1 1 0 01 0 0 1 1 1 0 11 0 0 1 1 1 1 01 0 0 1 1 1 1 11 0 1 0 0 0 0 01 0 1 0 0 0 0 11 0 1 0 0 0 1 01 0 1 0 0 0 1 11 0 1 0 0 1 0 01 0 1 0 0 1 0 11 0 1 0 0 1 1 01 0 1 0 0 1 1 11 0 1 0 1 0 0 01 0 1 0 1 0 0 11 0 1 0 1 0 1 01 0 1 0 1 0 1 11 0 1 0 1 1 0 01 0 1 0 1 1 0 11 0 1 0 1 1 1 01 0 1 0 1 1 1 11 0 1 1 0 0 0 01 0 1 1 0 0 0 11 0 1 1 0 0 1 01 0 1 1 0 0 1 11 0 1 1 0 1 0 01 0 1 1 0 1 0 11 0 1 1 0 1 1 01 0 1 1 0 1 1 11 0 1 1 1 0 0 01 0 1 1 1 0 0 11 0 1 1 1 0 1 01 0 1 1 1 0 1 11 0 1 1 1 1 0 01 0 1 1 1 1 0 11 0 1 1 1 1 1 01 0 1 1 1 1 1 11 1 0 0 0 0 0 01 1 0 0 0 0 0 11 1 0 0 0 0 1 01 1 0 0 0 0 1 11 1 0 0 0 1 0 01 1 0 0 0 1 0 11 1 0 0 0 1 1 01 1 0 0 0 1 1 11 1 0 0 1 0 0 01 1 0 0 1 0 0 11 1 0 0 1 0 1 01 1 0 0 1 0 1 1

Output (%)0

0.40.81.21.62.02.42.83.13.53.94.34.75.15.55.96.36.77.17.57.98.38.79.19.49.810.210.611.011.411.812.212.613.013.413.814.214.615.015.415.716.116.516.917.317.718.118.518.919.319.7

Output (%)20.120.520.921.321.722.022.422.823.223.624.024.424.825.225.626.026.426.827.227.628.028.328.729.129.529.930.330.731.131.531.932.332.733.133.533.934.334.635.035.435.836.236.637.037.437.838.238.639.039.439.8

Output (%)40.240.640.941.341.742.142.542.943.343.744.144.544.945.345.746.146.546.947.247.648.048.448.849.249.650.050.450.851.251.652.052.452.853.153.553.954.354.755.155.555.956.356.757.157.557.958.358.759.159.459.8

Output (%)60.260.661.061.461.862.262.663.063.463.864.264.665.065.465.766.166.566.967.367.768.168.568.969.369.770.170.570.971.371.772.072.472.873.273.674.074.474.875.275.676.076.476.877.277.678.078.378.779.179.579.9

Output (%)80.380.781.181.581.982.382.783.183.583.984.384.685.085.485.886.286.687.087.487.888.288.689.089.489.890.290.690.991.391.792.192.592.993.393.794.194.594.995.395.796.196.596.997.297.698.098.498.899.299.6100.0

EXT-0086-R00-01082020 (LTR) 10/13

STANDALONE TNW/DTW MODE

Use the following charts for selecting the fixed output levels for TNW and DTW. Minimum dimming level for TNW is 1%, levels 0-5* will result in 1% intensity for TNW. When using DTW in Standalone mode switches 8-11 are ignored as CCT is not independently adjustable in DTW, the selected intensity will determine the CCT according to Figure 7.

INTENSITYLevel Dip Setting Output (%)

0123456789

101112131415

0000000100100011010001010110011110001001101010111100110111101111

0.05*0.16*0.25*0.39*0.62*0.99*1.582.513.996.34

10.0916.0525.5340.6264.61100.0

CCTLevel Dip Setting Color Temp (K)

0123456789

101112131415

0000000100100011010001010110011110001001101010111100110111101111

2700285030003200340036003800400042004400460048005000520054005700

100.0

90.0

80.0

70.0

60.0

50.0

40.0

30.0

20.0

10.0

0.0

0 1 2 3 4 5 6 8 9 10 11 12 13 14 157

Level

D.C

. Out

put (

%)

Figure 7: Intensity and CCT selection chart (LEFT), level and output chart (RIGHT)

Standalone TNW/DTW Chart Mode Switch 1-3 Switches 4-7 (Intensity) Switches 8-12 (CCT)

Fixed Output - TNW 1-1-0 X-X-X-X X-X-X-X-0

Fixed Output - DTW 1-1-0 X-X-X-X X-X-X-X-1X = IGNORED

EXT-0086-R00-01082020 (LTR) 11/13

DYNAMIC TEST MODE

STANDALONE DYNAMIC MODE

Dynamic test mode is used to check the system functionality. This mode will ignore control inputs and cycle through the output range.

* On = 1, Off = 0

Dynamic test SCT mode:Outputs operate in standard configuration with the output duty cycle of all 4 channels matching. Output duty cycle starts from 0% and ramps linearly up to 100% output, then ramps back down to 0% and repeats indefinitely with a period of 5 seconds.

Time

Dim

min

g

5s

100%

0%0s

Time

Dim

min

g

10s5s

100%

0%0s

Warm White Cool White

Figure 8: SCT Dynamic test mode output range

Dynamic test TNW/DTW mode:This test mode is only applicable for TNW and DTW TILEs. Output duty cycle starts with the WARM LEDs (TNW=2700K,DTW=2200K) raising their intensity from 0% to 100% then decreasing to 0%. Next the COOL LEDs (TNW=5700K, DTW=3500K) raise intensity from 0% to 100% then decrease to 0%. This cycle repeats indefinitely with a period of 10 seconds.

Figure 9: TNW/DTW Dynamic test mode output graph

Standalone SCT Mode Switches 1-3 Switches 4-12

Dynamic Dimming Level Test (SCT) 1-0-1 IGNORED

Dynamic Color Tune Test (TNW) 1-1-1 IGNORED

Dynamic Dim-to-Warm Test (DTW) 1-1-1 IGNORED

EXT-0086-R00-01082020 (LTR) 12/13

APPENDIX A:OUTPUT DUTY CYCLE VERSUS DALI DIMMING FOR LOG AND LIN CURVES SCT MODE

APPENDIX B:OUTPUT DUTY CYCLE VERSUS DALI DIMMING FOR TNW

OUTPUT COLOR TEMPERATURE VERSUS DALI CCT FOR TNW

100

90

80

70

60

50

40

30

20

10

0

DALI IEC Spec Log Output (%)

DALI IEC Spec Linear Output (%)

0 50 100 150 200 250 300

Dimming Level (8-bit)

Out

put D

uty

Cyc

le (%

)

Linear Output (%)

Log Output (%)

100

90

80

70

60

50

40

30

20

10

00 50 100 150 200 250

Dimming Level (8-bit)

Out

put D

uty

Cyc

le (%

)

EXT-0086-R00-01082020 (LTR) 13/13

O +1 604 273 2665 F +1 604 273 2660 T +1 844 455 4448 W cooledgelighting.com

PRODUCT SUPPORTContact Cooledge Technical Support at:E apps.engineering@cooledgelighting.comO +1.781.899.0317 T +1.844.455.4448 (toll free - North America)

Cooledge Lighting Inc. 110-13551 Commerce Parkway Richmond, BC V6V 2L1 Canada

Cooledge Lighting reserves the right to change materials or modify the design of its product without notification as part of the company’s continuing product improvement program.

TROUBLESHOOTING

WARNING:Each module treats the input controls available with the following priority:1. Standalone (Fixed or Dynamic): If DIP Switch setting for one of these modes is selected, the module will ignore any other control

input (Casambi, 0-10V, DALI) and operate according to the settings of the operational mode selected2. Wireless (Casambi): When the wireless chip is installed in the Control Module all other inputs (0-10V and DALI) are ignored even

they are wired3. DALI: If the control module receives a DALI input, it will operate according to the DALI commands it receives, and 0-10V input

will be ignored even it is wired4. 0-10V: If the module has not installed Casambi card and no DALI control wired

CONTROLLER STATUS MODE LED STATUS LOAD BEHAVIOR

OFF (No Input Power) All OFF OFF

DALI Control Input Recognized

All except Standalone

Green Flashing Slow (1 Hz) Responsive to DALI Commands

Standalone Recognized StandaloneAlternate Amber/Green Slow (1 Hz)

Responsive only to DIP switch setting

No Control Input All Amber On Steady State Full ON

Input Over Voltage All Amber Flashing Slow (1Hz) OFF

Input Under Voltage All Amber Flashing Fast (8 Hz) OFF

Output Short Circuit V+ to V-All, dimming set to V<9.5V

Red Flashing with Intermittent Green

Load is OFF on shorted Channel All loads of the unit, except the shorted one, are flashing The rest of units in the installation remain responsive to DALI commands

Output Short Circuit V+ to V-All, dimming set to V<9.5V

Red Flashing with Intermittent Amber

Load is OFF on shorted Channel All loads of the unit, except the shorted one, are flashing The rest of units in the installation remain responsive to DALI commands

Output Short Circuit to V+TNW/DTW Dim Input Control set to V<9.5V

Red Flashing with Intermittent Green

Load is OFF on shorted Side of TNW Channel All other loads of the unit, except the shorted one, are flashing The rest of units in the installation remain responsiveto DALI commands

Output Short Circuit to V+TNW/DTW Dim Input Control set to V>9.5V

Red Flashing with Intermittent Amber

Load is OFF on shorted Side of TNW Channel All other loads of the unit, except the shorted one, are flashing The rest of units in the installation remain responsiveto DALI commands

Output Overload All Red Flashing Overloaded channel dimmed and flashing at 1s constant rate All other loads of the unit remain responsive to DALI commands

DALI Control Input shorted AllLED status OK in correspondence to each Mode, not affected

Loads FULL ON