Control your Nano-coating application with our specialist...
1
Coating Service Equipment Training Consulting Technical Overview NANO-COATING DIP SYSTEM Model No. NC-400 While all care has been taken to ensure that the information contained in this publication is correct, no responsibility can be accepted for any inaccuracy. The Company reserves the right to alter or modify the information contained herein at any time in light of technical or other developments. Technical specification are valid under operating conditions only. The company does not accept any responsibility for any misuse of the product and cannot be held liable for consequential damage. Get 360° Conformal Coating knowledge support from visit www.conformalcoatinghelp.com by SCH Scan QR for more information ENGINEERING QUALITY Page 1/1 schtechnologies SCH Coating Solutions Pvt. Ltd. 11-1-128, Sitaphalmandi, Secunderabad 500061, T.S., INDIA. Email : [email protected] Phone : +91-40-65897899 +91-9000383674 For further enquiries, please contact SCH Technologies Limited Newburgh Building, McLintock Way Barnsley, South Yorkshire, S70 6BF, UK Email : [email protected] Fax : (+44) 01226 770809 (+44) 01226 249019 For further enquiries, please contact Conformal coating solutions made easy The NC-400 Nano coating dip system is designed for low and medium volume coating of parts using new generation fluoropolymer Nano coatings that require refrigeration. The fluoropolymer coatings are normally blended with high cost fluorinated solvents for safety, reduction in transport costs and lower the impact on the environment. However, the solvents used in the Nano-coatings can be expensive and highly volatile. Therefore, they can be easily lost from the dip process through evaporation and increase costs. The Nano coat system prevents these significant losses and the machine allows coating of low and medium volume products in a safe, cost-effective way. Standard Features Ÿ Dip tank and basket system for easy loading and coating. Ÿ Unique solid state refrigerated system for control and capture of the solvents. Ÿ Filtration for control of the quality of the coating. Ÿ Minimal losses due to built in dual cooling coils. Ÿ Manual or automated dipping depending on options. Ÿ Full compatibility with almost all fluoropolymer coating materials and solvents from a variety of manufacturers. Our Nano-coating dip systems are designed for your needs. Contact us now Find out how we can help you with your Nano-coating dip process and save you time and money now. Control your Nano-coating application with our specialist dip systems
Transcript of Control your Nano-coating application with our specialist...
Coating
Service
Equipment
Training
Consulting
Technical Overview
NANO-COATING DIP SYSTEMModel No. NC-400
While all care has been taken to ensure that the information contained in this publication is correct, no responsibility can be accepted for any inaccuracy.
The Company reserves the right to alter or modify the information contained herein at any time in light of technical or other developments.
Technical specification are valid under operating conditions only.
The company does not accept any responsibility for any misuse of the product and cannot be held liable for consequential damage.
Get 360° Conformal Coating knowledge support from
visit www.conformalcoatinghelp.com
by SCH
Scan QR
for more
informationENGINEERINGQUALITY
Page 1/1
schtechnologies
SCH Coating Solutions Pvt. Ltd.11-1-128, Sitaphalmandi, Secunderabad
500061, T.S., INDIA.
Email : [email protected]
Phone : +91-40-65897899
+91-9000383674
For further enquiries, please contact
SCH Technologies LimitedNewburgh Building, McLintock Way
Barnsley, South Yorkshire, S70 6BF, UK
Email : [email protected]
Fax : (+44) 01226 770809
(+44) 01226 249019
For further enquiries, please contact
Conformal coating solutions made easy
The NC-400 Nano coating dip system is designed for low and medium
volume coating of parts using new generation fluoropolymer Nano coatings
that require refrigeration.
The fluoropolymer coatings are normally blended with high cost fluorinated
solvents for safety, reduction in transport costs and lower the impact on the
environment. However, the solvents used in the Nano-coatings can be
expensive and highly volatile. Therefore, they can be easily lost from the dip
process through evaporation and increase costs.
The Nano coat system prevents these significant losses and the machine
allows coating of low and medium volume products in a safe, cost-effective
way.
Standard Features
Ÿ Dip tank and basket system for easy loading and coating.
Ÿ Unique solid state refrigerated system for control and capture of the solvents.
Ÿ Filtration for control of the quality of the coating.
Ÿ Minimal losses due to built in dual cooling coils.
Ÿ Manual or automated dipping depending on options.
Ÿ Full compatibility with almost all fluoropolymer coating materials and solvents from a variety of
manufacturers.
Our Nano-coating dip systems are designed for your needs.
Contact us now
Find out how we can help you with your Nano-coating dip process and save you time and money now.
Control your Nano-coating application with our specialist
dip systems
