Control Chap 3
-
Upload
ayub-abd-rahman -
Category
Documents
-
view
73 -
download
3
description
Transcript of Control Chap 3
![Page 1: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/1.jpg)
CONTROL SYSTEMS THEORY
Reduction of Multiple Subsystems
CHAPTER 3STB 35103
![Page 2: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/2.jpg)
Objectives To reduce a block diagram of multiple
subsystems to a signal block representing the transfer function from input to output
![Page 3: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/3.jpg)
Introduction Before this we only worked with individual
subsystems represented by a block with its input and output.
Complex systems are represented by the interconnection of many subsystems.
In order to analyze our system, we want to represent multiple subsystems as a single transfer function.
![Page 4: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/4.jpg)
Block diagram A subsystems is represented as a block
with an input and output and a transfer function.
Many systems are composed of multiple subsystems. So, we need to add a few more schematic elements to the block diagram. Summing junction Pickoff points
![Page 5: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/5.jpg)
Block diagram
![Page 6: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/6.jpg)
Block diagram Summing junction
Output signal, C(s), is the algebraic sum of the input signals, R1(s), R2(s) and R3(s).
Pickoff point Distributes the input signals, R(s),
undiminished, to several output points.
![Page 7: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/7.jpg)
Block diagram There are three topologies that can be
used to reduce a complicated system to a single block.
Cascade form Parallel form Feedback form
![Page 8: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/8.jpg)
Block diagram Cascade form
a. cascaded subsystem b. equivalent transfer function
Equivalent transfer function is the output divided by the input.
![Page 9: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/9.jpg)
Block diagram Parallel form
Parallel subsystems have a common input and output formed by the algebraic sum of the outputs from all of the subsystems.
![Page 10: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/10.jpg)
Block diagram Feedback form
It is the same as the closed loop system that we learn in Chapter 1.
a. closed loop system b. closed loop, G(s)H(s) is open loop transfer function
![Page 11: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/11.jpg)
Block diagram Moving blocks to create familiar forms
Cascade, parallel and feedback topologies are not always apparent in a block diagram.
You will learn block moves that can be made in order to establish familiar forms when they almost exist. I.e. move blocks left and right past summing junctions and pickoff points.
![Page 12: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/12.jpg)
Block diagramBlock diagramalgebra for summingjunctions—equivalent forms for moving a block
a. to the left past asumming junction;b. to the right past a summing junction
![Page 13: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/13.jpg)
Block diagramBlock diagram algebra for pickoff points—equivalent forms for moving a blocka. to the left past a pickoff point;b. to the right past a pickoff point
![Page 14: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/14.jpg)
Block diagramBlock diagram reduction via familiar formsExample:Reduce the block diagram to a single
transfer function.
![Page 15: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/15.jpg)
Block diagramSolution:Steps in solving
Example 5.1:a. collapse summingjunctions;b. form equivalentcascaded systemin the forward pathand equivalentparallel system in thefeedback path;c. form equivalentfeedback system andmultiply by cascadedG1(s)
![Page 16: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/16.jpg)
Block diagramBlock diagram reduction by moving blocksExample:Reduce the system shown to a single transfer function.
![Page 17: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/17.jpg)
Block diagramSolution:First, move G2(s) to the left past the pickoff point to
create parallel subsystems, and reduce the feedback system consisting of G3(s) and H3(s).
![Page 18: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/18.jpg)
Block diagramSecond, reduce the parallel pair consisting of 1/g2(s) and unity and push G1(s) to the right past the summing junction, creating parallel subsystems in the feedback.
![Page 19: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/19.jpg)
Block diagramThird, collapse the summing junctions, add the two feedback elements together, and combined the last two cascaded blocks.
![Page 20: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/20.jpg)
Block diagramFourth, use the feedback formula to obtain figure below
Finally multiply the two cascaded blocks and obtain the final result.
![Page 21: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/21.jpg)
Block diagramExercise:Find the equivalent transfer function, T(s)=C(s)/R(s)
![Page 22: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/22.jpg)
Solution Combine the parallel blocks in the forward path. Then, push 1/s to
the left past the pickoff point. Combine the parallel feedback paths and get 2s. Apply the
feedback formula and simplify
![Page 23: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/23.jpg)
Block diagram reduction rules Summary
![Page 24: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/24.jpg)
Block diagram reduction rules
![Page 25: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/25.jpg)
Signal-Flow graphs Alternative method to block diagrams. Consists of
(a) Branches Represents systems
(b) Nodes Represents signals
![Page 26: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/26.jpg)
Signal-Flow graphs Interconnection of systems and signals
Example V(s)=R1(s)G1(s)-R2(s)G2(s)+R3(s)G3(s)
![Page 27: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/27.jpg)
Signal-Flow graphs Cascaded system
Block diagram
Signal flow
![Page 28: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/28.jpg)
Signal-Flow graphs Parallel system
Block diagram
Signal flow
![Page 29: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/29.jpg)
Signal-Flow graphs Feedback system
Block diagram
Signal flow
![Page 30: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/30.jpg)
SFG Question Given the following block diagram, draw a
signal-flow graph
![Page 31: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/31.jpg)
Solution
![Page 32: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/32.jpg)
Mason’s rule What?
A technique for reducing signal-flow graphs to single transfer function that relate the output of system to its input.
We must understand some components before using Mason’s rule Loop gain Forward-path gain Nontouching loops Nontouching-loop gain
![Page 33: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/33.jpg)
Mason’s rule
Loop gain Product of branch gains found by going through a path
that starts at a node and ends at the same node, following the direction of the signal flow, without passing through any other node more than once.
G2(s)H1(s) G4(s)H2(s) G4(s)G5(s)H3(s) G4(s)G6(s)H3(s)
![Page 34: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/34.jpg)
Mason’s rule
Forward-path gain Product of gains found by going through a path from the
input node of the signal-flow graph in the direction of signal flow.
G1(s)G2(s)G3(s)G4(s)G5(s)G7(s) G1(s)G2(s)G3(s)G4(s)G6(s)G7(s)
![Page 35: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/35.jpg)
Mason’s rule
Nontouching loops Loops that do not have any nodes in common.
Loop G2(s)H1(s) does not touch loops G4(s)H2(s), G4(s)G5(s)H3(s) and G4(s)G6(s)H3(s)
![Page 36: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/36.jpg)
Mason’s rule
Nontouching-loop gain Product of gains form nontouching loops taken
two, three, four, or more at a time. [G2(s)H1(s)][G4(s)H2(s)] [G2(s)H1(s)][G4(s)G5(s)H3(s)] [G2(s)H1(s)][G4(s)G6(s)H3(s)]
![Page 37: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/37.jpg)
Mason’s rule The transfer function, C(s)/R(s), of a system
represented by a signal-flow graph is
k
kkT
sR
sCsG
)(
)()(
gainpath -forwardkth the
path forward ofnumber
kT
k
![Page 38: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/38.jpg)
Mason’s rule
timeaat four taken gains loop gnontouchin
timeaat ee taken thrgains loop gnontouchin
timeaat taken twogains loop gnontouchin
gains loop -1
path. forwardth h the that toucgains loop those
from geliminatinby formed
kk
![Page 39: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/39.jpg)
Example Draw the SFG representation
![Page 40: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/40.jpg)
Solution SFG
![Page 41: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/41.jpg)
Solution
![Page 42: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/42.jpg)
Mason’s ruleQuestion Using Mason’s rule, find the transfer
function of the following SFG
![Page 43: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/43.jpg)
Solution
![Page 44: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/44.jpg)
Exercise 1 Apply Mason’s rule to obtain a single
transfer function
![Page 45: Control Chap 3](https://reader034.fdocuments.us/reader034/viewer/2022050712/55cf97c2550346d033936da9/html5/thumbnails/45.jpg)
Exercise 21. Reduce to a single transfer function (BDR)2. Draw the SFG representation3. Apply Mason’s rule to obtain the transfer function