CONTENTS€¦ · underwater. It can realize underwater direction-fixed and depth-fixed navigation....

Click here to load reader

  • date post

    08-Jul-2020
  • Category

    Documents

  • view

    1
  • download

    0

Embed Size (px)

Transcript of CONTENTS€¦ · underwater. It can realize underwater direction-fixed and depth-fixed navigation....

  • CONTENTS

    Product overviewIntroduction/01

    Function highlights/01

    List of items/02

    Charging and device connector/03

    Navigation preparation/03

    Activation and navigation/05

    PowerRay Body Host overview/06

    Body part name/06

    Navigation mode/07

    Status indicator/08

    Battery check/08

    Remote controller Remote controller overview/09

    Remote controller part name/09

    Remote controller preparation/10

    Remote control and operation/11

    Remote controller pairing/15

    1

    6

    9

    16Base station Base station overview/16

    Part name/16

    Base station operation/17

    P o w e r R a y

  • Fish Finder Overview/18

    Part name/19

    Fish Finder operation/19 Charging/20 Line-towing fishing rig/21

    VR

    Vision+ APP App download/23

    App connection and login/23

    App main interface introduction and navigation

    interface function introduction/24

    App motion operation control navigation/26

    Photo and video exportMobile device export and share/28

    Export videos and photos via Power View/29

    Navigation safety

    18

    22

    23

    28

    30

  • 1

    Product Overview

    Introduction

    Function highlights

    PowerRay can be used in freshwater or saltwater environments up to 30 meters

    underwater. It can realize underwater direction-fixed and depth-fixed navigation. The

    PowerRay can also shoot, seek fish and assist fishing underwater, and realize real-time

    image preview and motion control through VR goggles, remote controller and App.

    The equipped 4K camera can achieve 12 Megapixels photos and 4K video shooting.

    Maximum depth capacity 30 meters, and top cruise speed of 4 knots

    Equipped with Power Seeker Fish Finder which can be used alone to meet various

    use scenarios

    Mobile phone App produces real-time monitor underwater fish information, water

    temperature, depth, and underwater landscape Immersive Zeiss VR goggle, supports connection to multiple devices simultaneously,

    head movement control navigation capabilities 4K UHD, 1080P real-time streaming, 12 megapixels, burst mode photo shooting at 5

    fps, 32GB/64GB storage

    The Angler version and Wizard version are equipped with Fish Finder and auxiliary

    fishing functions. (Does the Angler version exist) Only Wizard version is equipped with VR goggle.

  • 2

    Product part display

    PowerRay Pro Vehicle

    VR goggle

    VR goggle headband

    Fish Finder charging cable

    Remote control

    Base station

    PowerRay (32G, exclusive electromagnet, with rubber plug)

    Wireless base stationCommunication cable

    tether (50m)Standard remote

    controllerStandard remote

    controller supported mobile device

    Power adapterPower adapter AC power

    cord

    PowerRay (32G, include electromagnet, without rubber plug)

    Wireless base stationCommunication cable (50m)Standard remote controllerStandard remote controller

    supported mobile devicePower adapterPower adapter AC power cableFish FinderFish Finder charging cableLine-towing fishing rig

    PowerRay (64G, with electromagnet, without rubber plug)

    Wireless base stationCommunication cable tether (70m)Standard remote controllerStandard remote controller

    supported mobile devicePower adapterPower adapter AC power cable

    Fish FinderFish Finder charging cableVR goggleVR goggle headbandLine-towing fishing rig

    Explorer version Angler version Wizard version

    Communication cable tether

    Power adapter

    Power adapter AC power cable

    Line-towing fishing rig

  • 3

    Charging and part connector

    Navigation preparation

    4

    1 2 3 4

    PowerVision

    1.Open the switch cover of the PowerRay.

    2.Open the bottom cover of the PowerRay, remove the top cover of the Fish Finder,

    and install the Fish Finder clockwise on the PowerRay.

    Remote control Base station Host PowerSeeker

  • 4

    5.Turn on the remote controller switch,

    and the colored light flickers during

    the connection process. There’s

    a prompting sound after successful

    connection with green light on.

    *Please avoid collision between the PowerRay and hard obstacles. *To avoid body corrosion, please rinse the body with clean water after each use either in fresh water or saltwater. *Please wipe PowerRay dry of any water and then store.

    3. Insert the 12-pin end of the communication cable into the host communication

    cable jack/charging jack and tighten the connector. (Automatically turn on after

    successful access.) The power is turned on with a prompting sound and a blue light

    will light up on the tail fin.

    *Please make sure to tighten the communication cable connected to the PowerRay.

    4.Insert the 4-pin end of the communication

    t e t h e r c a b l e i n t o t h e b a s e s t a t i o n

    communication jack/charging jack and

    tighten the connector. Long press the base

    station switch, and the base station will be

    powered on after the WIFI indicator is on.

  • 5

    Activation and navigation

    1.Turn on the mobile device WIFI, search

    and access the wireless base station

    h ot s p ot : P R A _ Sta t i o n _ x x x . D e fa u l t

    password: 1234567890.

    3.If the device is not activated, the App

    page wil l display the “One Touch

    Activation” button. Click on the button

    to activate the device.

    4.If the device is activated, the App page

    will display the “Start Navigation”

    button. Click on the button to start the

    device navigation.

    2 . O p e n t h e A p p , c o m p l e t e

    registration and log into the App.

  • 6

    PowerRay host

    Host part

    Host overview

    Navigation light

    Vertical thruster

    Horizontal thruster

    Tail lightSocket

    HD camera

    Fish Finder mounting hole

    Bait drop

    mounting point

    Tail light

    PowerRay can be used in freshwater or saltwater environments up to 30 meters

    underwater. It can realize underwater direction-fixed and depth-fixed navigation. The

    equipped 4K camera can achieve 12 Megapixels photos and 4K video shooting.

  • 7

    Navigation mode

    The device’s navigation mode is divided into “stable image mode” and “depth-fixed

    mode”. The navigation mode can be switched by the mode switch button on the

    remote controller or on the App. The two navigation modes are described as follows:

    Stable image mode: adjust the angle of the PowerRay and the horizontal plane by

    the up-and-down joystick and change the view of the PowerRay camera by changing

    the attitude of the PowerRay, to achieve stable image shooting.

    Depth-fixed mode: adjust the depth of the PowerRay in the water by the up-and-

    down joystick to adjust the PowerRay position and view.

  • 8

    Status indicator

    Battery check

    Charging

    Charging: the tail light is slowly flashing light and the head lights are off.

    Charging completed: the tail light is on solid and the head lights are off.

    Low battery display

    When the power is 10%, there’s a low battery alarm and the tail light flickers.

    To Lock and unlock

    Lock: tail light flickers for about 1s, and the brightness is set to 15% after locking.

    Unlock: tail light flickers for about 1s, and the brightness is set to 80% after unlocking.

    Power-on status

    Head light brightness 15%, and tail lights are on.

  • 9

    Remote controller

    Overview

    Part name

    The PowerRay remote controller can be connected to the base station wirelessly,

    integrating motion control, light adjustment, speed adjustment, photo shooting,

    video shooting, hook release, depth-fixed control and other functions. Users can

    easily complete PowerRay operations with the help of the remote controller.

    The PowerRay remote controller has a built-in rechargeable battery capacity of 3000

    mAh and can operate for up to 20 hours. The battery indicator can show the current

    battery level.

    HML

    *The remote controller has no waterproof function. Please do not drop it into the water.

    Left joystick

    Mode switch

    Charging jackRemote controller switch

    Electromagnet hook release switch

    Speed adjustment gear

    Battery indicator

    Right joystick

    Fish Finder interface switch

    Photo and video shooting button

    Right thumbwheel: navigation light brightness adjustment

    VR control mode button

    Left thumbwheel: lock and unlock button combination

  • 10

    Remote controller preparation

    HML

    HML

    1.Take out the standard

    remote controller and the

    supported mobile device

    and install the lower end of

    the mobile device into the

    remote controller mobile

    device socket.

    2.Rotate the button on

    the back of the supported

    mobile device and pull

    up the upper end of the

    mobile device.

    3.Clip the phone on the

    front bracket and make

    sure it is clamped.

    4.Turn on the remote controller switch, and the remote controller will automatically

    search and connect to the matching base station. The indicator will turn green with a

    prompting sound.

    Remote controller preparation

  • 11

    Supported mobile device iPad installation illustration

    1.Pull out the screw on the supported mobile device.

    2.Remove the middle splint from the front of the supported mobile device.

    3.Install the lower end of the mobile device into the remote controller mobile device socket.

    4.Clip the iPad on the front of the mobile device and make sure it is clamped.

    Control and operation

    In order to prevent accidental joystick control damage to people or equipment, the

    PowerRay first needs unlock operation to control the propeller through the joystick. After

    locking, the propeller is not controllable.

    H

    M

    E

    H

    M

    E

    HML

    Unlocking: first dial the left thumbwheel to

    the very left, then press the camera/Fish Finder

    interface switch button until 1 second later,

    there’s vibration to unlock. After unlocking,

    the joystick can control the propeller rotation.

    battery level.

    Locking: first dial the left thumbwheel to the

    very right, then press the camera/Fish Finder

    interface switch button until 1 second later,

    there’s vibration to lock. After locking, if

    controlling the joystick, the propeller will not be

    responding.

  • 12

    MODE1

    MODE3

    MODE2

    MODE4

    *The default joystick mode of the remote controller is “MODE 4”. The left joystick controls the PowerRay up/down and left/right turn. The right joystick controls the PowerRay forward/backward.

    HML

    The control mode of the PowerRay remote controller joystick is divided into 4 modes.

    Users can choose their own control mode through APP.

    Navigation gear selection: the remote-control switches gears by the gear shift button in

    the middle of the two joysticks.

    Left joystick

    Left joystick

    Left joystick

    Left joystick

    Right joystick

    Right joystick

    Right joystick

    Right joystick

    Forward

    Forward

    Forward

    Forward

    Backward

    Backward

    Backward

    Backward

    Left turn

    Left turn

    Left turn

    Left turn

    Right turn

    Right turn

    Right turn

    Right turn

    Up

    UpUp

    Up

    Down

    Down Down

    Down

  • 13

    HML

    Charging and battery display

    Gear button

    The three gear switches set the three

    speed gears of the power system, from

    bottom to top:

    L (low gear 0.5m/s) (1 knot)

    M (medium gear 1m/s) (2 knots)

    H (high gear 2m/s) (4 knots)

    Electromagnet hook release switch

    Long press for 2 seconds to switch the hook

    release switch.

    2.The hook release status, indicator off.

    3.The hook adsorption status, indicator on

    with blue.

    Speed adjustment gear

    Electromagnet hook release switch

    Mode switchFish Finder interface switch

    HML

    Battery check indicator

    More than 30% 30%-10% 10% or less

    Charging status

    Charging: red light on 2.5 hours full charging: green light on

  • 14

    Remote controller alarm

    When the remote controller is experiencing low voltage, the buzzer will alarm at 1HZ

    frequency, and the battery indicator on the remote controller light will turn red.

    1.The low voltage of the remote controller is battery 30%, green light on.

    3. Battery 10%~30%, yellow light on.

    4. Battery

  • 15

    Remote controller pairing

    Open Vision+ App, select the remote controller settings, and click on remote

    controller pairing.

    In the pop-up interface asks to input 6-bit SSID, enter the SSID of the remote

    controller.

  • 16

    Base station

    Base station overview

    Base station part

    *The base station is not waterproof . Please do not drop into the water.

    he base station is connected to the PowerRay through the communication cable.

    The remote controller, mobile phone and VR goggle can be connected through

    the WIFI hotspot of the base station. After connecting, it can control the device, the

    camera and get real-time images.

    The base station has a built-in 3000mAh battery for 3 hours of continuous operation.

    The battery indicator can show current battery level.

    The base station is equipped with the soft rubber belt that can be used to hang the

    base station on a fixed object to prevent it from falling into the water.

    Reset button

    Power buttonBattery indicatorWiFi signal indicatorSoft rubber belt

    Soft rubber belt knob

    Communication cable/

    charging connectorCommunication

    cable

  • 17

    Base station operation

    Turning on and off: long press the power switch button for 3 seconds the indicator

    light on, means the power is turned on successfully. Press again for 3 seconds to turn

    off until the indicator is off. Status indicator

    battery display:After base station is turned on, check current battery status from

    based station’s power indicator;

    wifi connection display:Base station wifi indicator staying solid light before any

    connection to mobile device; Base station wifi indicator flickers after successful

    connected to mobile device.

    ResetPut a paper clip into the reset button on the top of the base station to restore the original

    settings to the base station.

    Soft rubber belt

    Use the soft rubber belt to connect the right end of the base station with the soft rubber

    belt knob to hang the base station to the carrier.

    Battery check indicator

    More than 60% 60%~20% 20% or less

    Charging status

    Charging: flickering 2.5 hours full charging: green light on

  • 18

    Fish Finder

    Overview

    *Only Angler version and Wizard version are equipped with the device and functions.

    Select general settings and click on Fish Finder pairing to scan the QR code.

    PowerRay Fish Finder* can detect fish and terrain within 40m underwater and

    display it in real time via Vision+.

    The bottom of the Fish Finder is equipped with the fish luring light to actively

    attract fish.

    The Fish Finder can also be removed for independent use with a fishing pole.

    PowerSeeker Fish finder Pairing: 1) Scan the QR code of PowerSeeker, click

    ”confirm” to complete pairing. 2)Manually input PowerSeeker PSN code, click

    “confirm” to complete pairing.

  • 19

    Use of the Fish Finder

    PowerVision

    1.Open the hatch case at the bottom of the

    host, remove the upper case of the Fish

    Finder, and install it clockwise onto the

    PowerRay host.

    2.Open Vision+ App, enter PowerRay

    control interface, and click “Start

    Navigation”.

    Use with PowerRay

    Fishing line fixed position Upper case Middle case

    Lower case Charging jack Fish luring light

    Part name

  • 20

    1.Open the upper

    c a s e , t h r e a d t h e

    f i s h i n g l i n e , a n d

    install back to the

    Fish Finder.

    2.When the three probes of

    the Fish Finder are immersed

    into water, the system will

    automatically start, with the

    six blue fish luring lights at

    the bottom light on.

    3.Turn on the mobile device

    WIFI, search and access the

    Fish Finder hotspot “PSE_

    x x x ” . N o c o n n e c t i o n

    password.

    PowerVision

    Charging: red light on

    Fully charged: green light on

    Charging

    Use Fish Finder alone

    Make sure the three probes are dry before charging.

    The charging input voltage is 5V, and the input current is suggested to be no less than 500mA.

    Note

    3.Click the Fish Finder icon button

    on the main interface or short press

    the Fish Finder/camera screen

    switch button to switch to Fish

    Finder interface and start to use

    these.

  • 21

    Line-towing fishing rig

    Fix the fishing line on the fishing weight magnet and control the PowerRay through

    the remote controller or Vision+ APP to send the hook to the designated location for

    fixed delivery.

    HML

    1.Tie the hook tightly on the fishing rig.

    2.Long press the fishing rig magnet release button to detach the fishing magnet and the

    bait to the magnet.

    3.Put the PowerRay into the water, unlock, deliver the hook to the designated location,

    click on and release the hook.

    *The Angler version and Wizard version are equipped with this device and functions. *During the hook delivery process, keep the device straight to prevent the communication cable from being entangled with the fishing line.

    Water level

    Vision+ APP fish finding interface function introduction

    Depth

    ruler

    Current batteryCurrent battery

    map

    Intelligent Imaging

    Turn on / off Detection data

  • 22

    1.Put the mobile phone into the fixing plate and push to close the gap of the plate cover.

    2. Insert the fixing plate cover into the VR goggle

    VR

    3. About the VR head control function:

    Head control activation: press the left shoulder button of the remote controller and

    move the VR goggle up, down, left and right to activate the function of rising, diving,

    left turns and right turns.

    Head control exit mode: release the left shoulder button of the remote controller to

    exit the VR goggle head control mode.

    *Only Wizard version is equipped with the device and functions.

    Switch the “Vision+” APP interface to VR mode and follow the prompts to insert

    the mobile phone into the VR goggle.

    Fixing plate

  • 23

    APP Download

    App connection and login

    1.Open Vision+ APP.

    2.Enter the “Personal Center”, register and log in.

    3.Turn on the mobile device WIFI, search and access the wireless base station hotspot:

    PRA_Station_xxx. Default password: 1234567890.

    4.After connecting, enter the PowerRay page which displays successful connection and

    click to start navigation.

    *For the first use, the device needs to be activated. For details on how to activate it, see Vison+ APP Activation Guide.

    Vision+ APP

    Asia Europe North America

    To download the Vision+ App, please scan the below QR code or via App Store, and

    watch video tutorials at Vision+ or www.powervision.me.

  • 24

    App main interface introduction and navigation interface function introduction

    PowerRay Main Interface

    Picture / Video Interface Service Interface

    PowerSeeker Main Interface

  • 25

  • 26

    APP motion operation control navigation

    Click the settings button on the top right corner.

    Left joystick Right joystick

    Forward

    Backward

    Left turn Right turn

    Up

    Down

  • 27

    Select control settings-motion mode.

    Press the motion control icon on the lower right corner to control.

  • 28

    Photo and video export

    1. Connect PowerRay, communication cable and wireless base station. Start the device.

    Mobile device export and share

    2.Turn on the mobile device WIFI ,

    search and access wireless base station

    hotspot : PRA_Station_xxx. Default

    password: 1234567890.

    3.Open Vision+ APP and connect the

    device.

    5. Select photos and videos you want to download, click download, and the device photos

    will be automatically downloaded to the APP local media library.

    6. Switch to “media library” interface to play and share photos.

    7. iOS users choose photos and videos in the “media library” interface, click download,

    and the photos will be imported to the iOS phone album. If you want to edit, you need to

    connect the phone and the computer thru airdrop, and then import into the computer.

    *Some mobile phones cannot browse 4K videos.

    4.Click on the photo management icon( )

    of PowerRay’s photo interface on the APP.

  • 29

    Export videos and photos using PowerView

    1.Connect PowerRay, communication cables and wireless base station. Start the base

    station. Please ensure sufficient power of the device.

    2.Switch on computer WIFI, search and access wireless base station hotspot: PRA_

    Station_xxxxxx. Default password: 1234567890.

    3. Open PowerView, click connect and make sure the successful connection.

    4. Click on the photo or video button according to the needs and export to your

    computer.

    PowerView is a photo and video export tool supporting PowerRay. You can visit the

    official PowerVision website to download and install the latest version.

  • 30

    Navigation safety

    Navigate in open and clear waters

    Navigate within visual range

    Do not t r y and dive more than 30 meters or 98 ft during operation

    S t a y a w a y f r o m crowds and ports . Also try and stay in depths of 5ft or more.

    30M

    Please avoid aquatic plants, gravel and other under water obstacles

    No throwing the PowerRay into water from high altitude

    No placing in high temperature environment

    Propellers cannot rotate while not in water

    Do not touch rotating propellers, otherwise it may be subject to serious physical injury

    Fix the base station a wa y f ro m wate r before use

    Please do not drop into the water.

    Try and avoid hand dragging the communication cable underwater

  • 31

    China RoHSName and content of hazardous substances in products

    This form is compiled in accordance with SJ/T 11364-2014.

    O: indicates the content of the hazardous substance in all homogeneous materials of the

    part is below the limit requirement of GB/T 26572.

    X: indicates the content of the hazardous substance in at least one of the homogeneous

    materials of the part exceeds the limit requirement of GB/T 26572.

    Corresponding electronic information products(EIP) sold in China must comply with

    the Electronic Information Products Pollution Control Marking Requirements of Chinese

    Mainland. According to SJ/T 11364 requirements of China’s electronic industry

    standards, environmental protection periods should be marked on the products.

    Part name Lead(Pb)

    Mercury(Hg)

    Cadmium(Cd)

    Outer case

    Circuit board

    Camera

    Motor

    Cable

    Hazardous substance

    Hexavalent chromium

    (Cr6+)

    Polybrominated biphenyls

    (PBB)

    Polybrominated diphenylethers

    (PBDE)