CONTENTS · CONTENTS Page 5 Split-ball probes 6 Technical data ... all other sizes are made of...

4

Sicherheit durch QualitätSafety through qualityDIATEST

I N H A LTC O N T E N T S

Page

5 Split-ball probes

6 Technical data7 Design, travel transfer, operating principle,

range of application8 Accessories

10 Checking stands12 DIATEST small bore gauges, standard,

carbide and blind bore for bore hole Ø 0.47 mm to 41.1 mm (mm-version)

15 DIATEST laboratory bore gauges,range 0.47 mm to 30.60 mm (mm-version)

15 Technical information16 DIATEST small bore gauges, standard,

carbide and blind bore for bore hole Ø 0.0185“ to 1.6200“ (inch-version)

19 DIATEST laboratory bore gauges,range 0.0185“ to 1.13“ (inch-version)

20 DIATEST-T-probes to measure deeper bores, Ø 2.05 to 9.80 mm (mm-version)20 DIATEST-T-probes and sets to measure

deeper bores, Ø 0.081“ to 0.388“(inch-version)

22 DIATEST-3-point-probes for bores from 4.75 mm to 150.60 mm or0.187“ to 5.929“(mm- and inch-version)

23 DIATEST-PA-probes to measure paralleldistances from 4.7 mm to 41.1 mm or 0.185“ to 1.618“ (mm- and inch-version)

GEORGE

Typewritten text

Willrich Precision: Ph: 866-945-5742 / [email protected]

5

Split-ball probes are universal boregauges for indicating internalmeasurements. The modular de-sign with extensive accessoriesenables gauging of most commonbores. This allows use for serialand individual control as well aspreferentially in the plant directlyat the production machine.Due to different styles throughbores, blind bores, paralleldistances, etc. can be gauged.

T-T-

T-

R-

T-FB

MH6-73-R

S P L I T - B A L L P R O B E S


6

T-3P

T-PA

Ø kleiner 8,2 mm)

Technical data

Operating range:Standard split-ball probein hard chrome:Ø 0.47 – 41.1 mmStandard split-ball probe withcarbide contacts:Ø 1.5 – 41.1 mm (for heavy wear conditions)Standard split-ball probe withceramic contacts:Ø 3.7 – 41.1 mm (for softmaterials like aluminium etc.)

Blind bore split-ball probe: Ø1.5 – 41.1 mm (for gaugingclose to bottom of bore)

3-point split-ball probe :Ø 4.75 – 150,6 mm (gaugingof polygon-shaped workpieces)

T-probes: Ø 2.05 – 9.8 mm(for gauging deep bores withØ smaller than 8.2 mm)

Measuring range:0.06 mm up to 2.2 mm(according to size of probe)

Accuracies:Repeatability (standard split-ballprobes):

Manual gauging c. 1 μm,Stationary gauging in stand< 0,5 μm

Linearity (standard split-ballprobes):

Size 0.5 – 1.50 max. 2%of travel, min. 0.001 mmSize 1.75 – 40 max. 1%Size 1.75 – 40 max. 1%of travel, min. 0.001 mm

Calibration with setting ringMeasuring depth:

Up to Ø 4.2 max. 750 mm(T-probes with TV2/TV2,5)Ø > 4.2 – 8.3 max. 1000 mm(T-probes with TV4)Ø > 8.3 – 41.1 several metres(standard split-ball probes withTV8)

Contact points:Standard version in hardchrome, different materials likecarbide, ceramic (depending on size). Special shapes for blind bores,parallel distances (grooves)

Special shapes on request

7

T-PA T-3PT-ZM

T-ZG Super-FB Einstich-Tastkopf

ring pressure of the indicating unitand centre themselves in the bore.The gauge is zero-set (calibrated)in a setting ring. When gaugingby hand, determine axial cente-ring by rocking gauge assemblyin bore (see below ill., middle).Reversal point of Indicator handshows measured value. Whenchecking stands are used, rockingmovement is not required.

Range of operation

Apart from bore diametersDIATEST split-ball probes candetect geometrical shape defectssuch as ovality, concentricity,barrel-shape, etc. Besides, split-ball probes are available for gau-ging parallel distances, groovetoothing (serration), internal gearsand recesses.Special shapes on requestSend drawing, workpiece sampleand description of gaugingmethod with inquiry.Some special shapes of DIATESTsplit-ball bore gauges:– T-ZG: bore gauging with centre

stud (on request)– Super-FB: blind bore gauging

up to c. 0.1 mm to bore ground(on request)

– Recess-probe: diameter gaugingof recesses (on request)

– T-PA: gauging of paralleldistances (see page 6)

– T-ZM: gear gauging fromMi = 3.5 mm (see leaflet“Internal Gear Gauges“)

– T-3P: gauging of polygon shapes from Ø 4.75 mm(see page 6)

Design

A split-ball probe unit consists ofat least 5 parts:Probe (4) made of hardened steel– in standard version chromedc. 1000 HVTapered needle (3) made of har-dened steel or carbide with lappedtaper.Hardness steel needle: 62-64HRC, hardness carbide needle:c. 1600 HVIndicator holder (2) MH6-51with clamp 8H6 or MH6-51-Zwith clamp 3/8“, retracting indi-cator holder MH6-73-RIndicating unit (1) any mechanicalor electronic indicator, micro com-parator or electronic probe withdisplaySetting ring: DIATEST setting ringsare available in metric or inchsizes. Rings up to Ø 1.5 have aninsert made of synthetic sapphire,all other sizes are made of arti-ficially aged and wear resistantspecial steel. DIATEST setting ringscan only be supplied in fixed sizesaccording to works standard.Intermediate sizes can only besupplied as DIN 2250-C settingrings.

Travel transmission

The lapped taper of the needletransfers the spreading movementof the split-ball probe in a 1:1ratio to the indicator.

Working Principle

The semicircular anvils of theprobe are spread by the measu-

2

4

3

1

8


Depth extensions forT-probes …

… are required in combinationwith T-probes for measuringdeeper bores smaller thanØ 8.3 mm. Diameter of extensiondepends on design of T-probe:TV2 (Ø 2.0), TV2.5 (Ø 2.5),TV4 (Ø 4.0). Extensions are avai-lable in different lengths fromL = 20 mm up to L = 1000 mm(depending on extension).Connection thread of one side isalways M6 x 0.75. This allowsconnection of all accessories.T-extensions are temperature-stabilized.(T-GL: To measure the groove-Ø of twistedgrooved tubes, like e.g. gun barrels. Measuringrange of probes: Corresponding to T- or standardprobes – see tables on page 12-14 and 20-21).

Accessories

A large assortment of accessoriescomplete the split-ball-pro-gramme. The standard connectionthread M6 x 0.75 enables amultiple combination of theindividual gauging elementsaccording to the measuring job.

Retracting indicator holder(MH6-73-R)

For easy entry in bore.

Depth extension TV8(Ø 8,0)

For measuring deeper bores fromc. Ø 8.2 mm. Available in differentlengths from L = 20 mm up toL = 1000 mm. From TV8-80(L = 80) depth extensions are tem-perature-stabilized.

TV8

T-T

TV4

MH6-73-R

T-GL

T-FB

9

Depth stops (TA8…)

Ideal for gauging bores at aspecific depth. Also search forreversal point can be omitted. Thedepth stop TA8-24 is clampedonto depth extension TV8. Thestop ring Ø 24 is interchangeablewith stop rings Ø 45 or Ø 60.It is also possible to screw on aspecial stop ring instead of thediscs.

Right angle attachment(W6)

Screwed between holder andprobe where clearance betweentool and workpiece is limited.Minimum distance between rightangle attachment and obstacle:27 mm plus length of probe(see table page 14).

Rotary adapter (TV64-D)

Probe can be turned in bore whiledial indicator remains stationary.Specially suitable for roundnessmeasuring of workpieces whichcannot be turned.

TV64-D

MH6-51

W6TA8

TA8


10

This is particularly important whenshape defects are detected.Accessories like e.g. floating hol-der and vee attachment enable areliable and fast transaction ofgauging also for unskilled workers.By using adjustable depth stopsone can carry through measure-ments in indicated depths.Specially beneficial is the use ofstands directly on the workingplace for bore control during pro-duction.

Checking stands

In combination with split-ball pro-bes checking stands offer a safebasis for an exact and fast boregauging (measuring of Ø, bellmouth, conical form, barrel shape,roundness etc.). Search for rever-sal point is omitted. Amount ofstroke can be set precisely.

MST102

MST58

11

Universal checking stand(MST102)

This checking stand is suitable forlarger sizes. The measuring strokeis continuously adjustable from0 – 130 mm. The vee attachment(standard accessory) or other cen-tering devices can be mountedon the platen (100 x 100) in aT-slot.

Extras:– Collar for Ø 30 mm c/w dial

gauge bracket for precise heightadjustment

– Platens in different widths(130 mm and 160 mm)

– Jib arms (150 mm and200 mm) for larger work-pieces and BMD-floating holders(SH-BMD30)

Floating holder (SH-T)

It allows the split-ball probe, whichis clamped in the checking stand,a slight “floating“ in horizontalplane. A probe easily finds theexact axis when entering into thebore. Floating range continuouslyadjustable from 0 to 1.5 mm(until 3 mm without regulation).

Version SH-T-F for adjustment ofmeasuring pressure.

Checking stand (MST58)

The MST58 is easy to handle andespecially suitable for small work-pieces. The measuring stroke iscontinuously adjustable from0 – 35 mm. With the checkingnut you can easily and exactlyadjust the height. The diameterof platen is 58 mm.

Extras:– For easy positioning a clamp-

on-vee (MST-WA) can be fixedto platen

– Perforated platen (MST-MT80) for measuring through bores up to Ø 13 mm

MST-MT80

MST-WA

SH-T

0,47– 0,53 0,52 – 0,58

0,57 – 0,670,65 – 0,770,75 – 0,870,85 – 0,97

0,95 – 1,151,07 – 1,251,17 – 1,351,27 – 1,451,37 – 1,55

1,50 – 1,901,80 – 2,202,05 – 2,45

2,30 – 2,702,55 – 2,952,80 – 3,203,05 – 3,453,30 – 3,703,55 – 3,95

3,80 – 4,20

3,70 – 4,304,20 – 4,804,70 – 5,305,20 – 5,805,70 – 6,306,20 – 6,806,70 – 7,307,20 – 7,807,70 – 8,308,20 – 8,808,70 – 9,309,20 – 9,80

9,70 – 10,30

9,40 – 10,6010,40 – 11,6011,40 – 12,6012,40 – 13,6013,40 – 14,6014,40 – 15,6015,40 – 16,6016,40 – 17,6017,40 – 18,6018,40 – 19,6019,40 – 20,60

20,40– 21,6021,40 – 22,6022,40 – 23,6023,40 – 24,6024,40 – 25,6025,40 – 26,6026,40 – 27,6027,40 – 28,6028,40 – 29,6029,40 –30,60

28,90– 31,1030,90 – 33,1032,90 – 35,1034,90 – 37,1036,90 – 39,1038,90 – 41,10

T-0,50T-0,55

T-0,60T-0,70T-0,80T-0,90

T-1,0T-1,1T-1,2T-1,3T-1,4

T-1,75T-2,00T-2,25

T-2,50T-2,75T-3,00T-3,25T-3,50T-3,75

T-4,00/1

T-4,0T-4,5T-5,0T-5,5T-6,0T-6,5T-7,0T-7,5T-8,0T-8,5T-9,0T-9,5

T-10,0/2

T-10T-11T-12T-13T-14T-15T-16T-17T-18T-19T-20

T-21T-22T-23T-24T-25T-26T-27T-28T-29T-30

T-30/5T-32T-34T-36T-38T-40

M00

M0

M1

M2

M3

M4

M5

T-HM-1,75T-HM-2,00T-HM-2,25

T-HM-2,50T-HM-2,75T-HM-3,00T-HM-3,25T-HM-3,50T-HM-3,75

T-HM-4,00/1

T-HM-4,0T-HM-4,5T-HM-5,0T-HM-5,5T-HM-6,0T-HM-6,5T-HM-7,0T-HM-7,5T-HM-8,0T-HM-8,5T-HM-9,0T-HM-9,5

T-HM-10,0/2

T-HM-10T-HM-11T-HM-12T-HM-13T-HM-14T-HM-15T-HM-16T-HM-17T-HM-18T-HM-19T-HM-20

T-HM-21T-HM-22T-HM-23T-HM-24T-HM-25T-HM-26T-HM-27T-HM-28T-HM-29T-HM-30

T-HM-30/5T-HM-32T-HM-34T-HM-36T-HM-38T-HM-40

M1-HM

M2-HM

M3-HM

M4-HM

M5-HM

T-KE-4,0T-KE-4,5T-KE-5,0T-KE-5,5T-KE-6,0T-KE-6,5T-KE-7,0T-KE-7,5T-KE-8,0T-KE-8,5T-KE-9,0T-KE-9,5

T-KE-10,0/2

T-KE-10T-KE-11T-KE-12T-KE-13T-KE-14T-KE-15T-KE-16T-KE-17T-KE-18T-KE-19T-KE-20

T-KE-21T-KE-22T-KE-23T-KE-24T-KE-25T-KE-26T-KE-27T-KE-28T-KE-29T-KE-30

T-KE-30/5T-KE-32T-KE-34T-KE-36T-KE-38T-KE-40

M2-KE

M3-KE

M4-KE

M5-KE

T-FB-1,75T-FB-2,00T-FB-2,25

T-FB-2,50T-FB-2,75T-FB-3,00T-FB-3,25T-FB-3,50T-FB-3,75

T-FB-4,00/1

T-FB-4,0T-FB-4,5T-FB-5,0T-FB-5,5T-FB-6,0T-FB-6,5T-FB-7,0T-FB-7,5T-FB-8,0T-FB-8,5T-FB-9,0T-FB-9,5

T-FB-10,0/2

T-FB-10T-FB-11T-FB-12T-FB-13T-FB-14T-FB-15T-FB-16T-FB-17T-FB-18T-FB-19T-FB-20

T-FB-21T-FB-22T-FB-23T-FB-24T-FB-25T-FB-26T-FB-27T-FB-28T-FB-29T-FB-30

T-FB-30/5T-FB-32T-FB-34T-FB-36T-FB-38T-FB-40

M1-FB

M2-FB

M3-FB

M4-FB

M5-FB

DIATEST small bore gauges, standard, carbide and blind borefor bore hole Ø 0.47 mm to 41.1 mm.

Range(Bold type =measuring

range of set)

mm

2)Split-ball probes, complete sets1), setting ring sets2)

Standard probeshard chrome plated

Standard probescarbide inserted

Standard probesceramic inserted

Blind bore probeshard chrome plated

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

12

N00-030

N00-040

N0-070

N1-100

N1-150

N2-270

N3-310

N3-310

N5-350

NFB1-100

NFB1-150

NFB2-270

NFB3-310

NFB3-310

NFB5-350

R-0,500R-0,550R-0,600R-0,700R-0,800R-0,900

R-1,000R-1,100R-1,200R-1,300R-1,400

R-1,750R-2,000R-2,250R-2,500R-2,750R-3,000R-3,250R-3,500R-3,750

R-4,000R-4,500R-5,000R-5,500R-6,000R-6,500R-7,000R-7,500R-8,000R-8,500R-9,000R-9,500

R-10,000R-11,000R-12,000R-13,000R-14,000R-15,000R-16,000R-17,000R-18,000R-19,000R-20,000

R-21,000R-22,000R-23,000R-24,000R-25,000R-26,000R-27,000R-28,000R-29,000R-30,000

R-30,000R-32,000R-34,000R-36,000R-38,000R-40,000

Standardneedles

Blind boreneedles

Set ofsetting rings 2)

Standardnominal sizes

inter-mediatesizes

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode

Best.-Nr.OrderCode

Best.-Nr.OrderCode

Best.-Nr.OrderCode

13

NHM0-070

NHM1-100

NHM1-150

NHM2-270

NHM3-310

NHM3-310

NHM5-350

NFB-HM1-100

NFB-HM1-150

NFB-HM2-270

NFB-HM3-310

NFB-HM3-310

NFB-HM5-350

RM00

RM0

RM1

RM2

RM3

RM4

RM5

R-1,500

R-5,750R-7,750

R-10,500R-11,500R-12,500R-13,500R-14,500R-15,500R-16,500R-17,500R-18,500R-19,500

R-20,500R-21,500R-22,500R-23,500R-24,500R-25,500R-26,500R-27,500R-28,500R-29,500

R-31,000R-33,000R-35,000R-37,000R-39,000

Needles Setting rings

Lengthof probes

L 3)

Max. measuringdepth

M 3)

Min. measuringheight

(Standard probe)

H1 3)

Measuringpressure

of dial gauge

N(ca)


(Blind bore probe)

H2 3)


1) A complete set contains:Wooden box with range chart (space for setting rings is left), split-ball probes and needles, standard holder MH6-51 and wrench SW7-G.

2) Extent of set: See setting rings standard nominal sizes.

3) See sketch page 15.

14

1,51,82,02,52,83,0

11

17

22

40

50

50

90

100

19,5

19,5

25,3

30,6

47,3

48,5

48,5

48,5

0,250,270,290,310,330,35

0,6

0,9

1,2

2

3,3

3,6

4

0,3

0,5

1,0

1,2

1,5

0,3 – 0,6

0,5 – 0,8

0,8 – 1

1,2 – 1,8

1,5 – 2

1,5 – 2,5

1,5 – 2,5

Technical information

DIATEST laboratory bore gauges,range 0.47 mm to 30.60 mm.

Range Standard probeshard chrome plated





Maximum measuring depth MDepends on probe size. For deter-mination of max. measuring depth.Insert bore gauge partly into boreup to indicator.Larger measuring depths from:Ø 8.20 mm with extensionØ 2.05 mm with T-probesØ 0.95 mm with special probes

Length of probes LWhen space is limited and rightangle attachment is used, minimumdistance between bore obstruction= 27 mm + length of probes (L).

Minimum measuring height HIndicates how close to bore groundcan be gauged when probe isspread to maximum.

Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Best.-Nr.Order Code

0,47 – 1,550,95 – 3,951,50 – 9,801,50 – 20,603,70 – 30,60

M000M01M12M123M234

M12-HMM123-HMM234-HM M234-KE

M12-FBM123-FBM234-FB

RM000RM01RM12RM123RM234

mm



15

Several basic sets in one box

Technical information

Blind bore probe

Standard probe

DIATEST small bore gauges, standard, carbide and blind borefor bore hole Ø 0.0185“ to 1.6200“.

0.0185 – 0.02100.0205 – 0.0228

0.0224 – 0.02640.0256 – 0.03000.0295 – 0.03430.0335 – 0.0380

0.0375 – 0.04500.0430 – 0.04900.0470 – 0.05300.0510 – 0.05700.0540 – 0.0610

0.057 – 0.0750.067 – 0.0850.081 – 0.096

0.091 – 0.1100.105 – 0.1260.120 – 0.1400.134 – 0.1550.149 – 0.169

0.165 – 0.2000.185 – 0.2200.209 – 0.2440.235 – 0.2700.260 – 0.2950.288 – 0.3230.313 – 0.3470.335 – 0.3700.360 – 0.394

0.380 – 0.4250.420 – 0.4800.474 – 0.5310.524 – 0.5830.573 – 0.6340.622 – 0.6810.672 – 0.7300.721 – 0.7800.772 – 0.830

0.833 – 0.8800.872 – 0.9300.922 – 0.9800.972 – 1.0361.022 – 1.0801.072 – 1.130

1.130 – 1.2201.210 – 1.3001.290 – 1.3801.370 – 1.4601.450 – 1.5401.530 – 1.620

T-0XT-00

T-01T-02T-03T-04

T-05T-06T-07T-07T-08T-08T-09T-09

T-011T-012T-013

T-014T-015T-016T-017T-018

T-021T-021T-022T-022T-023T-023T-024T-024T-025T-025T-026T-026T-027T-027T-028T-028T-029T-029

T-031T-032T-033T-034T-035T-036T-037T-038T-039

T-041T-041T-042T-042T-043T-043T-044T-044T-045T-045T-046T-046

T-051T-052T-053T-054T-055T-056

E00

E0E

E1

E2E

E3

E4

E5

T-HM-011T-HM-012T-HM-013

T-HM-014T-HM-015T-HM-016T-HM-017T-HM-018

T-HM-021T-HM-021T-HM-022T-HM-022T-HM-023T-HM-023T-HM-024T-HM-024T-HM-025T-HM-025T-HM-026T-HM-026T-HM-027T-HM-027T-HM-028T-HM-028T-HM-029T-HM-029

T-HM-031T-HM-032T-HM-033T-HM-034T-HM-035T-HM-036T-HM-037T-HM-038T-HM-039

T-HM-041T-HM-041T-HM-042T-HM-042T-HM-043T-HM-043T-HM-044T-HM-044T-HM-045T-HM-045T-HM-046T-HM-046

T-HM-051T-HM-052T-HM-053T-HM-054T-HM-055T-HM-056

E1-HM

E2-HMM

E3-HM

E4-HM

E5-HM

T-KE-021T-KE-021T-KE-022T-KE-022T-KE-023T-KE-023T-KE-024T-KE-024T-KE-025T-KE-025T-KE-026T-KE-026T-KE-027T-KE-027T-KE-028T-KE-028T-KE-029T-KE-029

T-KE-031T-KE-032T-KE-033T-KE-034T-KE-035T-KE-036T-KE-037T-KE-038T-KE-039

T-KE-041T-KE-041T-KE-042T-KE-042T-KE-043T-KE-043T-KE-044T-KE-044T-KE-045T-KE-045T-KE-046T-KE-046

T-KE-051T-KE-052T-KE-053T-KE-054T-KE-055T-KE-056

E2-KE

E3-KE

E4-KE

E5-KE

T-FB-011T-FB-012T-FB-013

T-FB-014T-FB-015T-FB-016T-FB-017T-FB-018

T-FB-021T-FB-021T-FB-022T-FB-022T-FB-023T-FB-023T-FB-024T-FB-024T-FB-025T-FB-025T-FB-026T-FB-026T-FB-027T-FB-027T-FB-028T-FB-028T-FB-029T-FB-029

T-FB-031T-FB-032T-FB-033T-FB-034T-FB-035T-FB-036T-FB-037T-FB-038T-FB-039

T-FB-041T-FB-041T-FB-042T-FB-042T-FB-043T-FB-043T-FB-044T-FB-044T-FB-045T-FB-045T-FB-046T-FB-046

T-FB-051T-FB-052T-FB-053T-FB-054T-FB-055T-FB-056

E1-FB

E2-FB

E3-FB

E4-FB

E5-FB


range of set)

inch




Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

16

)Split-ball probes, complete sets 1), setting ring sets2)

N00-030

N00-040

N0-070

N1-100

N1-150

N2-270

N3-310

N3-310

N5-350

NFB1-100

NFB1-150

NFB2-270

NFB3-310

NFB3-310

NFB5-350

R-0XR-00R-01R-02R-03R-04

R-05R-06R-07R-08R-09

R-011R-012R-013R-014R-015R-016R-017R-018

R-021R-022R-023R-024R-025R-026R-027R-028R-029

R-031R-032R-033R-034R-035R-036R-037R-038R-039

R-041R-042R-043R-044R-045R-046

R-051R-052R-053R-054R-055R-056

0.0200.0220.0250.0280.0320.036

0.0400.0450.0500.0550.060

0.06250.07500.08750.10000.11500.13000.14500.1600

0.18000.20000.22500.25000.27500.30000.32500.35000.3750

0.40000.45000.50000.55000.60000.65000.70000.75000.8000

0.85000.90000.95001.00001.05001.1000

1.18001.26001.34001.42001.50001.5800

Standardneedles

Blind boreneedles


Standardnominal sizes

Nominal sizeInch

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode

Best.-Nr.OrderCode

0,50800,55880,63500,71120,81280,9144

1,01601,14301,27001,39701,5240

1,58751,90502,22252,54002,92103,30203,68304,0640

4,5725,0805,7156,3506,9857,6208,2558,8909,525

10,16011,43012,70013,97015,24016,51017,78019,05020,320

21,59022,86024,13025,40026,67027,940

29,97232,00434,03636,06838,10040,132

inch sizein mm

17

NHM0-070

NHM1-100

NHM1-150

NHM2-270

NHM3-310

NHM3-310

NHM5-350

NFB-HM1-100

NFB-HM1-150

NFB-HM2-270

NFB-HM3-310

NFB-HM3-310

NFB-HM5-350

RE00

RE0

RE1

RE2

RE3

RE4

RE5

Needles Setting rings




3) See sketch page 19.

Technische DatenTechnical information

Lengthof probes

L 3)mm

Max. measuringdepth

M 3)mm


(Standard probe)

H1 3)mm

Measuringpressure

of dial gauge

N(ca)


(Blind bore probe)

H2 3)mm

18

1,51,82,02,52,83,0

11

17

22

40

50

50

90

100

19,5

19,5

25,3

30,6

47,3

48,5

48,5

48,5

0,250,270,290,310,330,35

0,6

0,9

1,2

2

3,3

3,6

4

0,3

0,5

1,0

1,2

1,5

0,3 – 0,6

0,5 – 0,8

0,8 –1

1,2 – 1,8

1,5 – 2

1,5 – 2,5

1,5 – 2,5

Standard-TastkopfStandard probe

Sackloch-TastkopfBlind bore probe

DIATEST laboratory bore gauges,range 0.0185“ to 1.13“.

0.0185 – 0.06100.0375 – 0.16900.0570 – 0.39400.0570 – 0.83000.1650 – 1.1300

E000E01E12E123E234

E12-HME123-HME234-HM E234-KE

E12-FBE123-FBE234-FB

RE000RE01RE12RE123RE234

Range Standard probeshard chrome plated





Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Geräte 1)Sets 1)

Best.-Nr.Order Code

Best.-Nr.Order Code

inch



Technische InformationenTechnical information

Maximum measuring depth MDepends on probe size. For deter-mination of max. measuring depth.Insert bore gauge partly into boreup to indicator.Larger measuring depths from:Ø 8.20 mm with extensionØ 2.05 mm with T-probesØ 0.95 mm with special probes

Length of probes LWhen space is limited and rightangle attachment is used, minimumdistance between bore obstruction= 27 mm + length of probes (L).

Minimum measuring height HIndicates how close to bore groundcan be gauged when probe isspread to maximum.

19

Several basic sets in one box

DIATEST-T-probes to measure deeper bores,Ø 2.05 mm to 9.80 mm.

Standard-T-probeshard chrome plated

Standard-T-probescarbide inserted

Setting rings Standard needles


range of set)

mm

T-T-2,25T-T-2,50

T-T-2,75T-T-3,00T-T-3,25T-T-3,50T-T-3,75T-T-4,00

T-T-4,5T-T-5,0T-T-5,5T-T-6,0T-T-6,5T-T-7,0T-T-7,5T-T-8,0T-T-8,5T-T-9,0T-T-9,5

2,05 – 2,452,30 – 2,70

2,55 – 2,952,80 – 3,203,05 – 3,453,30 – 3,703,55 – 3,953,80 – 4,20

4,20 – 4,804,70 – 5,305,20 – 5,805,70 – 6,306,20 – 6,806,70 – 7,307,20 – 7,807,70 – 8,308,20 – 8,808,70 – 9,309,20 – 9,80

M1-T

M2-T

T-T-HM-2,75T-T-HM-3,00T-T-HM-3,25T-T-HM-3,50T-T-HM-3,75T-T-HM-4,00

T-T-HM-4,5T-T-HM-5,0T-T-HM-5,5T-T-HM-6,0T-T-HM-6,5T-T-HM-7,0T-T-HM-7,5T-T-HM-8,0T-T-HM-8,5T-T-HM-9,0T-T-HM-9,5

M1-T-HM

M2-T-HM

R-2,250R-2,500

R-2,750R-3,000R-3,250R-3,500R-3,750R-4,000

R-4.500R-5,000R-5,500R-6,000R-6.500R-7,000R-7,500R-8,000R-8,500R-9,000R-9.500

RM1-T

RM2-T

NT1-100

NT1-150

NT2-150

NT-HM1-100

NT-HM1-150

NT-HM2-150

1) A complete set contains:Wooden box with range chart (space for setting rings is left), standard holder MH6-51, T-split-ball probes, T-needles and depthextension TV (length 64 mm), wrenches SW7-G and SW1,7-2-3-G.

DIATEST-T-probes to measure deeper bores,Ø 0.081“ to 0.388“.

T-T-013T-T-014

T-T-015T-T-016T-T-017T-T-018

T-T-021T-T-022T-T-023T-T-024T-T-025T-T-026T-T-027T-T-028T-T-029

0.081 – 0.0940.092 – 0.107

0.107 – 0.1220.122 – 0.1370.137 – 0.1520.152 – 0.167

0.166 – 0.1870.186 – 0.2120.211 – 0.2370.236 – 0.2620.261 – 0.2870.286 – 0.3120.311 – 0.3370.336 – 0.3620.361 – 0.388

E1-T

E2-T

T-T-HM-015T-T-HM-016T-T-HM-017T-T-HM-018

T-T-HM-021T-T-HM-022T-T-HM-023T-T-HM-024T-T-HM-025T-T-HM-026T-T-HM-027T-T-HM-028T-T-HM-029

E1-T-HM

E2-T-HM

R-013R-014

R-015R-016R-017R-018

R-021R-022R-023R-024R-025R-026R-027R-028R-029

RE1-T

RE2-T

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

SatzSet

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode

NT1-100

NT1-150

NT2-150

NT-FB1-150

NT-FB2-150


T-T-FB-2,75T-T-FB-3,00T-T-FB-3,25T-T-FB-3,50T-T-FB-3,75T-T-FB-4,00

T-T-FB-4,5T-T-FB-5,0T-T-FB-5,5T-T-FB-6,0T-T-FB-6,5T-T-FB-7,0T-T-FB-7,5T-T-FB-8,0T-T-FB-8,5T-T-FB-9,0T-T-FB-9,5

M1-T-FB

M2-T-FB

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

NT-FB1-150

NT-FB2-150

Blind boreneedles

StahlSteel

Best.-Nr.OrderCode

Standard-T-probeshard chrome plated

Standard-T-probescarbide inserted

Setting rings Standard needles


range of set)

inch

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

SatzSet

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

HartmetallCarbide

Best.-Nr.OrderCode

StahlSteel

Best.-Nr.OrderCode


Gerät 1)Set 1)

Best.-Nr.OrderCode

EinzelnSingle

Best.-Nr.OrderCode

Blind boreneedles

StahlSteel

Best.-Nr.OrderCode

NT-HM1-100

NT-HM1-150

NT-HM2-150

T-T-FB-015T-T-FB-016T-T-FB-017T-T-FB-018

T-T-FB-021T-T-FB-022T-T-FB-023T-T-FB-024T-T-FB-025T-T-FB-026T-T-FB-027T-T-FB-028T-T-FB-029

E1-T-FB

E2-T-FB

20


Length ofprobes


(Standard probe)

RequiredT-extension

Measuring depthwith T-extension

L = 64 mm

Measuring pressureof dial gauge

N(ca)

25,3

30,6

31

0,9

1,2

1,7

TV2-64

TV2,5-64

TV4-64

90

95

95

0,8 – 1

0,8 – 1

1 – 1,5



Länge derTastköpfeLength of

probes

mm

Mindest Messhöhe(Standard-Tastkopf)


(Standard probe)mm

BenötigteT-Verlängerung

RequiredT-extension

mm

Messtiefe mitT-Verlängerung

Measuring depthwith T-extension

L = 64 mmmm

Messkraft derMessuhr

Measuring pressureof dial gauge

N(ca)

25,3

30,6

31

0,9

1,2

1,7

TV2

TV2,5

TV4

90

95

95

0,8 – 1

0,8 – 1

1 – 1,5


(Blind bore probe)

0,3

0,5

Mindest Messhöhe(Sackloch-Tastkopf)


(Blind bore probe)mm

0,3

0,5

21

mm

3-point probes 1)

Best-Nr.OrderCode

3-pointneedles

Best-Nr.OrderCode

inch

DIATEST-3-point-probes for boresfrom 4.75 mm to 150.6 mm/0.187“ to 5.929“.

4,75 – 5,305,25 – 5,805,75 – 6,306,25 – 6,806,75 – 7,307,25 – 7,807,75 – 8,308,25 – 8,808,75 – 9,309,25 – 9,809,75 – 10,30

10,25 – 10,8010,75 – 11,3011,25 – 11,8011,75 – 12,3012,25 – 12,8012,75 – 13,3013,25 – 13,8013,75 – 14,3014,25 – 14,8014,75 – 15,3015,25 – 15,8015,75 – 16,3016,25 – 16,8016,75 – 17,3017,25 – 17,8017,75 – 18,3018,25 – 18,8018,75 – 19,3019,25 – 19,8019,75 – 20,30

20,25 – 20,8020,75 – 21,3021,25 – 21,8021,75 – 22,3022,25 – 22,8022,75 – 23,3023,25 – 23,8023,75 – 24,3024,25 – 24,8024,75 – 25,3025,25 – 25,80

MessbereichRange= ± 0,6 mm25,4 – 26,626,4 – 27,6

usw. bis/etc. till54,4 – 55,6

55,4 – 56,656,4 – 57,6


75,4 – 76,676,4 – 77,6


100,4 – 101,6101,4 – 102,6usw. bis/etc. till149,4 – 150,6

T-3P-5,0T-3P-5,5T-3P-6,0T-3P-6,5T-3P-7,0T-3P-7,5T-3P-8,0T-3P-8,5T-3P-9,0T-3P-9,5T-3P-10,0

T-3P-10,5T-3P-11T-3P-11,5T-3P-12T-3P-12,5T-3P-13T-3P-13,5T-3P-14T-3P-14,5T-3P-15T-3P-15,5T-3P-16T-3P-16,5T-3P-17T-3P-17,5T-3P-18T-3P-18,5T-3P-19T-3P-19,5T-3P-20

T-3P-20,5T-3P-21T-3P-21,5T-3P-22T-3P-22,5T-3P-23T-3P-23,5T-3P-24T-3P-24,5T-3P-25T-3P-25,5

T-3P-26T-3P-27usw. bis/etc. tillT-3P-55




N3P-2-270oder/orN3P-HM2-270




1) 3-point probes are carbide inserted, angular position 120°.3-point probes with different angular position and3-point blind bore probes (hard chromed) on request.

22

0.187 – 0.2090.207 – 0.2280.226 – 0.2480.246 – 0.2680.266 – 0.2870.285 – 0.3070.305 – 0.3270.325 – 0.3460.344 – 0.3660.364 – 0.3860.384 – 0.406

0.404 – 0.4250.423 – 0.4450.443 – 0.4650.463 – 0.4840.482 – 0.5040.502 – 0.5240.522 – 0.5430.541 – 0.5630.561 – 0.5830.581 – 0.6020.600 – 0.6220.620 – 0.6420.640 – 0.6610.659 – 0.6810.679 – 0.7010.699 – 0.7200.719 – 0.7400.738 – 0.7600.758 – 0.7800.778 – 0.799

0.797 – 0.8190.817 – 0.8390.837 – 0.8580.856 – 0.8780.876 – 0.8980.896 – 0.9170.915 – 0.9370.935 – 0.9570.955 – 0.9760.974 – 0.9960.994 – 1.016

MessbereichRange= ± 0,024“

1.000 – 1.0471.039 – 1.087usw. bis/etc. till2.142 – 2.189

2.181 – 2.2282.220 – 2.268usw. bis/etc. till2.929 – 2.976

2.969 – 3.0163.008 – 3.055usw. bis/etc. till3.913 – 3.961

3.953 – 4.0003.992 – 4.039usw. bis/etc. till5.882 – 5.929

Range Range


DIATEST-PA-probes to measure parallel distancesfrom 4.7 mm to 41.1mm/0.185“ to 1.618“.

mm

4,7 – 5,35,2 – 5,85,7 – 6,36,2 – 6,86,7 – 7,37,2 – 7,87,7 – 8,38,2 – 8,88,7 – 9,39,2 – 9,8

9,4 – 10,610,4 – 11,611,4 – 12,612,4 – 13,613,4 – 14,614,4 – 15,615,4 – 16,616,4 – 17,617,4 – 18,618,4 – 19,619,4 – 20,620,4 – 21,621,4 – 22,622,4 – 23,623,4 – 24,624,4 – 25,625,4 – 26,626,4 – 27,627,4 – 28,628,4 – 29,629,4 – 30,6

28,9 – 31,130,9 – 33,132,9 – 35,134,9 – 37,136,9 – 39,138,9 – 41,1

TriebnadelnNeedles

Best.-Nr.OrderCode

PA-Tastköpfe 1)PA-probes 1)

Best.-Nr.OrderCode

TriebnadelnNeedles

Best.-Nr.OrderCode

PA-Tastköpfe 1)PA-probes 1)

Best.-Nr.OrderCode

T-PA-5,0T-PA-5,5T-PA-6,0T-PA-6,5T-PA-7,0T-PA-7,5T-PA-8,0T-PA-8,5T-PA-9,0T-PA-9,5

T-PA-10T-PA-11T-PA-12T-PA-13T-PA-14T-PA-15T-PA-16T-PA-17T-PA-18T-PA-19T-PA-20T-PA-21T-PA-22T-PA-23T-PA-24T-PA-25T-PA-26T-PA-27T-PA-28T-PA-29T-PA-30

T-PA-30/5T-PA-32T-PA-34T-PA-36T-PA-38T-PA-40

N2-270oder/orNHM2-270



NFB2-270oder/orNFB-HM2-270



inch

0.185 – 0.2090.205 – 0.2280.224 – 0.2480.244 – 0.2680.264 – 0.2870.283 – 0.3070.303 – 0.3270.323 – 0.3460.343 – 0.3660.362 – 0.386

0.370 – 0.4170.409 – 0.4570.449 – 0.4960.488 – 0.5350.528 – 0.5750.567 – 0.6140.606 – 0.6540.646 – 0.6930.685 – 0.7320.724 – 0.7720.764 – 0.8110.803 – 0.8500.843 – 0.8900.882 – 0.9290.921 – 0.9690.961 – 1.0081.000 – 1.0471.039 – 1.0871.079 – 1.1261.118 – 1.1651.157 – 1.205

1.138 – 1.2241.217 – 1.3031.295 – 1.3821.374 – 1.4611.453 – 1.5391.531 – 1.618

1) P-probes are hard chrome platedSpecial designs on request

T-FB-PA-5,0T-FB-PA-5,5T-FB-PA-6,0T-FB-PA-6,5T-FB-PA-7,0T-FB-PA-7,5T-FB-PA-8,0T-FB-PA-8,5T-FB-PA-9,0T-FB-PA-9,5

T-FB-PA-10T-FB-PA-11T-FB-PA-12T-FB-PA-13T-FB-PA-14T-FB-PA-15T-FB-PA-16T-FB-PA-17T-FB-PA-18T-FB-PA-19T-FB-PA-20T-FB-PA-21T-FB-PA-22T-FB-PA-23T-FB-PA-24T-FB-PA-25T-FB-PA-26T-FB-PA-27T-FB-PA-28T-FB-PA-29T-FB-PA-30

T-FB-PA-30/5T-FB-PA-32T-FB-PA-34T-FB-PA-36T-FB-PA-38T-FB-PA-40

23

Range Standard version Range Blind bore version

CONTENTS · CONTENTS Page 5 Split-ball probes 6 Technical data ... all other sizes are made of...

Documents

Transcript of CONTENTS · CONTENTS Page 5 Split-ball probes 6 Technical data ... all other sizes are made of...