Container Specifications

download Container Specifications

of 46

  • date post

    26-Oct-2014
  • Category

    Documents

  • view

    120
  • download

    8

Embed Size (px)

Transcript of Container Specifications

Container Specification

Introduction Container Specials

ContainerIntroduction General Information

General Purpose Container

20n 40n

Platform

20n 40n

High Cube General Purpose Container

-Llo Hapag

yd

40n

Ventilated Container

20n

Hardtop Container

20n 40n

Refrigerated Container

20n 40n

High Cube Hardtop Container

-Llo Hapag

yd

40n

High Cube Refrigerated Container

40n

Open Top Container

-Llo Hapag

yd

loyd ag-L Hap

20n 40n

Flat

Hap a

g -L

loy d

20n 40n

Tank Container

20n

Electric Plugs on Refrigerated Containers

High Cube Flat

40n

Essential Conversion Factors Container Size Type Codes

IntroductionHapag-Lloyd offer to their customers 20 different types of containers. With this wide range of standard and special containers we can provide you with the most suitable container for every product. This booklet informs you about the technical data of the Hapag-Lloyd containers, such as b dimensions b weights b particulars of construction All values listed in the tables are given in metric. Ft and lbs values are for easy reference only. All details listed are nominal figures. Apart from the tolerances given on internal dimensions on page 5 the tare weight can vary 2 %. In addition to the containers listed in this booklet we use, if necessary, leased equipment and/or exchange containers with other carriers. This booklet only lists technical data. If you are looking for further advice or your special requirements are not yet satisfied, we are more than happy to assist you. Please call your nearest Hapag-Lloyd office or agent and let our experience work for you. Please visit us as well on our Internet homepage, which will be frequently updated. www.hlcl.com

General InformationInternal Dimensions The internal dimensions and door openings of all Hapag-Lloyd containers exceed the below given ISO dimensions. However, the dimensions mentioned on the following pages are nominal figures. Because of production tolerances a difference in measurement is possible: Tolerances Maximum Difference Maximum Gross Weights 20n containers: 30 480 kg (67 200 lbs) valid for most Hapag-Lloyd 20n containers; exceeds ISO minimum standards (ISO 668). 40n containers: Up to 34 000 kg (74 959 lbs). Weight Limits for road and rail transport For individually valid limits contact your local Hapag-Lloyd office. Floor Loads A container floor is capable of carrying a fork-lift truck with a maximum axle load of 5 460 kg (12 040 lbs), if the contact area per wheel is at least 142 cm2 (22 sq.in) (ISO 1496/I). Gooseneck Tunnel on 40n Containers All Hapag-Lloyd 40n containers are fitted with a Gooseneck tunnel to enable the transport on Gooseneck chassis. Timber Treatment Exposed timber is treated according to Australian requirements. Container Markings For easy identification Hapag-Lloyd containers are marked with HLCU- or HLXUprefix either. Containers built in 1997 or thereafter do also show the ISO Size Type Code. For further information please see page 46. 10 mm 10 mm 10 mm 3/8 3/8 3/8 Length Width Height Concentrated Loads Concentrated loads are loads, that are not distributed over the full length of floor, when stowing heavy cargo in containers other than flats or platforms due care has to be taken that concentrated loads will not exceed the strength of the bottom construction of the container. The maximum spreaded load should not exceed for 20n containers 4 ts per running meter in length (3n 3.5 ) for 40n containers 3 ts per running meter in length load must not exceed over max. payload

External and Minimum Internal Dimensions (according ISO) The following table gives the overall dimensions as standardized in ISO 668 and the minimum internal dimensions and door openings for General Purpose Containers as standardized in ISO 1496-1. Length Dimensions Minimum Internal Dimensions Minimum Door Opening Dimensions Width Height

20n 40n 8n 8n 8n6 9n6 6 058 mm 12 192 mm 2 438 mm 2 438 mm 2 591 mm 2 896 mm 5 867 mm 11 998 mm 2 330 mm 19n3 39n43/8 7n73/4 2 197 mm 7n21/2 2 350 mm 2 655 mm 7n81/2 8n81/2 2 286 mm 2 134 mm 2 261 mm 2 566 mm 7n6 7n 7n5 8n5

General Purpose ContainerISO Size Type Code: (22 G0 (22 G1)

20n

b Suitable for any general cargo. b Containers may be equipped with linger bags suitable for bulk cargo, e.g. malt. b Fork-lift pockets for loaded containers.

b Various lashing devices on the top and bottom longitudinal rails and the corner posts. Lashing devices have a load of 1 000 kg (2 205 lbs) each.

General Purpose ContainerConstruction Inside Dimensions Length Width Height mm ft 8(6) high Steel container with corrugated walls and wooden floor 5895 19(41/8) 2350 7(81/2) 2392 7(101/8) 2340 7(81/8) 2292 7(61/4) 30 480 67 200 2 250 4 960 28 230 62 240 33,2 1172 HLCU HLCU HLCU HLXU HLXU HLXU 200 000 226 599 240 000 243 899 246 750 246 779 200 000 212 799 212 800 239 799 300 000 310 099 mm ft mm ft Door Opening Width Height mm ft mm ft Max. Gross kg lbs Weights Tare kg lbs Capacity Max. Payload kg lbs m3 cu.ft Hapag-Lloyd Serial Number

20Footnote

1)

1) 2) 3)

5900 19(41/4) 5895 19(41/8) Construction

2352 7(85/8) 2350 7(81/2)

2395 7(101/4) 2385 7(97/8)

2340 7(81/8) 2338 7(8)

2292 7(61/4) 2292 7(61/4)

32 500 71 650 24 000 52 910

2 370 5 220 2 250 4 960 Weights Tare kg lbs 2 700 5 950 2 700 5 950 2 590 5 710

30 130 66 430 21 750 47 950

33,2 1172 33,2 1172 Capacity

HLXU 310 100 322 999 HLCU 227 000 229 499

1 ) 2) 3 ) 1)

Length mm ft 8(6) high Steel container with corrugated walls, wooden floor and removable steel roof 5886 19(33/4) 5886 19(33/4) 5886 19(33/4)

Inside Dimensions Height Width Middle Side mm mm mm ft ft ft 2342 7(81/8) 2342 7(81/8) 2342 7(81/8) 2388 7(10) 2388 7(10) 2375 7(91/2) 2313 7(7) 2313 7(7) 2330 7(73/4)

Max. Gross kg lbs 30 480 67 200 30 480 67 200 30 480 67 200

Max. Payload kg lbs 27 780 61 250 27 780 61 250 27 890 61 490

m3 cu.ft 32,8 1160 32,8 1160 32,8 1160

Hapag-Lloyd Serial Number

Footnote

HLCU 260 200 261 399 HLXU 365 000 365 649 HLCU 261 400 261 799 HLCU 261 800 261 999 HLCU 262 600 262 999

4)

4)

4)

Remarks:1) 2)

10 lashing rings on each top longitudinal rail; particularly suitable for the transport of hanging garments racks. Provided with passive vents. ISO size type code: 22G1 3) Provided with extra lashing rings/bars for the transport of liner bags in the corner posts adjacent to the corner castings. 4) For special information please see 20 Hard Top Container. 7

General Purpose ContainerISO Size Type Code: (42 G0 (42 G1)

40n

-Lloyd Hapag

b Suitable for any general cargo.

b Various lashing devices on the top and bottom longitudinal rails and the corner posts. Lashing devices have a permissible load of 1 000 kg (2 205 lbs) each.

General Purpose ContainerConstruction Inside Dimensions Length Width Height mm ft 8(6) high Steel container with corrugated walls and wooden floor 12 029 39(51/2) 12 032 39(55/8) 12 032 2 350 7(81/2) 2 352 7(85/8) 2 352 2 392 7(101/8) 2 395 7(101/4) 2 395 2 340 7(81/8) 2 340 7(81/8) 2 340 2 292 7(61/4) 2 292 7(61/4) 2 292 30 480 67 200 32 500 71 650 32 500 3 780 8 330 4 030 8 885 3 980 26 700 58 870 28 470 62 765 28 520 67,7 2390 67,7 2390 67,7 HLCU 400 000 428 599 HLXU 400 000 449 999 HLXU 500 000 507 749 HLXU 507 750 511 349 HLXU 511 350 519 799 mm ft mm ft Door Opening Width Height mm ft mm ft Max. Gross kg lbs Weights Tare kg lbs Capacity Max. Payload kg lbs m3 cu.ft Hapag-Lloyd Serial Number

40'Footnote

1) 1) 2) 1) 2) 1) 2) 1) 2)

C onstruction Length mm ft 8(6) high Steel container with corrugated walls, wooden floor and removable steel roof 12 020 39(51/4) 12 020 39(51/4) 12 020 39(51/4)

Inside Dimensions Height Width Middle Side mm mm mm ft ft ft 2342 7(81/8) 2342 7(81/8) 2345 7(81/4) 2388 7(10) 2388 7(10) 2380 7(95/8) 2313 7(7) 2313 7(7) 2300 7(61/2)

Max. Gross kg lbs 30 480 67 200 30 480 67 200 30 480 67 200

Weights Tare kg lbs 4 700 10 360 4 700 10 360 4 700 10 360

Capacity Max. Payload kg lbs 25 780 56 840 25 780 56 840 25 780 56 840 m3 cu.ft 67,2 2374 67,2 2374 65,3 2306

Hapag-Lloyd Serial Number

Footnote

HLCU 462 100 462 399 HLCU 462 400 463 999 HLXU 465 000 465 649 HLXU 467 950 467 999

3)

3) 3) 3)

Remarks: 1) 21 lashing rings on each top longitudinal rail; particularly suitable for the transport of hanging garment equipment. 2) Provided with passive vents. ISO size type code: 42 G1 3) Special information, please see 40( Hard Top Container.

9

High Cube General Purpose ContainerISO Size Type Code: (45 G0 (45 G1)

40n

d g-Lloy Hapa9n62.9 m

b Especially for light, voluminous cargo and overheight cargo up to max. 2.70 m (8n101/4 ) (see table). b Numerous lashing devices on the top and bottom longitudinal rails and the corner posts.

b Lashing devices have a permissible load of 1 000 kg (2 205 lbs) each.

b Consider overheight for inland transportation

High Cube General Purpose ContainerConstruction Inside Dimensions Length Width Height mm ft 9(6) high Steel container with corrugated walls and wooden floor 12 024 39(53/8) 12 032 39(55/8) 2350 7(81/2) 2352 7(85/8) 2697 8(101/8) 2700 8(101/4) 2340 7(81/8) 2340 7(81/8) 2597 8(61/4) 2597 8(61/4) 30 480 67 200 32 500 71 650 4 020 8 860 4 010 8 840 Weights Tare kg lbs 4 900 10 803 5 200 11 436 26 460 58 340 28 490 62 810 76,3 2694 76,3 2