CONTA-LABEL marking systems - beprompt.co.th · 333 CONTA-LABEL marking systems Overview Terminal...
Transcript of CONTA-LABEL marking systems - beprompt.co.th · 333 CONTA-LABEL marking systems Overview Terminal...
332
CONTA-CONNECT
CONTA-LABEL marking systems
Marking cables, connectors and devices to provide unambiguous, logicallyarranged and permanently legible identification helps to prevent mis-wiring,increases safety and reduces work levels, which in turn reduces manufacturingand maintenance costs including those caused by production down-times.These marking requirements are also specified in the European standardEN 60204 (VDE 0113 part 1).
In fulfilling all of these requirements, the CONTA-CLIP marker line offers asolution for all tasks involved with the marking of electrical equipment. Weoffer a wide variety of options for marking terminal blocks, cables, wires anddevices: ready-to-use standard prints, blank markers for the customer to printhimself as well as customized inscriptions.
332332
333333
CONTA-LABEL marking systems
Overview
333
Terminal markers: starting at page 336
Our extensive line of products feature ready-to-use markerswith standard and customized print (Pocket-Maxicard PMC),unprinted markers in the classic Maxicard format for DIY print-ing with the EMS-2 plotter, and marker holders and grouplabel holders in a variety of designs. The tables on pages 336and 337 offer an overview of which markers can be snappedonto which terminals. The pitch size is the deciding factorwhen making the selection. With a terminal width of 5 mm, themarker must be 5 mm wide to enable strips of markers to beattached to the terminal. If the marker is to be attached to a ter-minal with a larger pitch, then the strips must be separatedinto individual markers.
Wire and cable markers: refer to page 364
The product line consists of markers for wires with small diame-ters and markers for cables with larger diameters. CONTA-CLIPoffers a wide variety of solutions: these include open or closedmarkers, printed or blank for individual marking tasks, combi-nations of single markers with transparent sleeves or clip-onsingle markers with or without cable ties, markers for particu-larly aggressive environments or markers for environments inwhich halogen-free materials are obligatory. Our EMS-2 plottersystem allows you to conveniently print on practically all mark-ers in Maxicard format, strips or single markers.
Wire and cable markers: refer to page 396
The product line includes markers for devices and systemsmanufactured by the major manufacturers. Markers based onclassic adhesive techniques and snap-on markers are also avail-able. The markers are available with custom print or as blankmarkers for marking with our EMS-2 plotter system.
Labelling systems and software: refer to page 408
The CONTA-CLIP labelling software is easy to use, intuitiveand suitable for all marking requirements. All integrated func-tions are user controlled and linked to our Online Help. Themarking software facilitates manual entry of data via the key-board. It supports numerous data formats and also allows datato be imported directly from the project file. Excellent user-friendly functionality makes our hardware easy to use. We offera plotter system and a modular attachable engraving unit aswell as a thermal transfer printer for printing on rolls of labels.The program is rounded off by a wide variety of accessoriesdesigned to facilitate easy handling in all application solutions.
MA
RK
ING
SYS
TEM
S
334
CONTA-CONNECT
CONTA-LABEL marking systems
Short description of materials
334334
CONTA-CLIP marking systems are available in a variety ofdesigns and materials. The numerous variants made of plasticand stainless steel are designed to suit the respective applica-tion. The material characteristics are described below.
POLYAMIDE PA 6.6
Polyamide 6.6 has good electrical and mechanical character-istics, high strength properties and is resistant to ageing. It isalso highly ductile thanks to its semi-crystalline compositionwhich allows it to absorb little moisture. This offers a clearadvantage compared to polycarbonate material (PC). PC isless resistant to the strong substances used in industrialprocesses (such as cutting oil or cooling lubricants). PA 6.6also is much more resistant than PC against solvents such asketones, acetates, and aldehydes. PA 6.6 also features animproved resistance to UV radiation compared to PC. WhilePC quickly starts to turn yellow and is less impact resistant,PA 6.6 only exhibits a minimum reduction in UV surface sta-bility. PA 6.6 also retains its colouring and technical charac-teristics much longer than PC.
Products: SB, PMC, Maxicard, AS labelling strips, Marker holders, group marker holders
PVC
PVC is made from polyvinyl chloride and contains halogens.PVC has a longer service life and is resistant to the effects ofweather, corrosive saline solutions, most acids and alkalis.Soft PVC contains plasticizer. The material is both strong andflexible. It can withstand temperatures from -30°C to +80°C.
Products: KBH, KBH-S, KBH-C, KH, KHE, KSH
335335
CONTA-LABEL marking systems
Short description of materials
335
ZEREX
This is a polyurethane mixture based on poly-ether (TPU).ZEREX is a halogen-free, flame-resistant extrusion mixtureused mainly when specifications require good flame retar-dant properties and that smoke and toxin development isrestricted. It can withstand temperatures from -30°C to+90°C.
Products: KHZ
Rust-free material
Stainless steel SS 2347 corresponds to AISI 316 and W. No. 1.4404. Acid-resistant steel contains a minimum of 17 % chrome, 11 % nickel and 2 % molybdenum. It is usedchiefly where saline and damp conditions prevail and wherecorrosion resistance against acids is a requirement. It canwithstand temperatures between -80°C to +500°C.
Products: MPS, MPS H, CTS
Polyester
This is an impact-resistant material that is resistant to chemi-cals, weak acids, UV radiation, salts and solvents. The materi-al does not shrink and is suitable for permanent print onlabels and markers. It can withstand temperatures from -40°Cto +125°C.
Products: KKE, GKE
MA
RK
ING
SYS
TEM
S
List of terminal markers available for CONTA-CLIP terminal blocks, end supports and marker holdersCONTA-CONNECT
Screw terminalsBKA 2,5...BKA 4...BKA 10...DLI / DLIS...FF 1/1,5FF 2.5HSK...IK...IKD...KBL 1,5 - 4KBL 2,5KBL 2,5 - 4KBL 6 - 10...KBLD 2,5KBLD 4MAG...NT 2,5 - 4...NT 6 - 10...PTK...RK 1,5 - 4RK 2,5...RK 6 - 10...RK 16...RK 35...RK 50...RK 95...RK 150...RK 240...RK 2,5 - 4...RKB 4RKD 2.5...RKD 4...RKDG 4...SF 2,5 - 4SIK 10...SK 1...SL 2,5...SL 4/15...SL 4/35...SL 10...SL 16...SL 35...SLN 2,5...SRK 2,5SRK 2,5/15SRK 2,5/2A...SRK 4/2A...SRK 6/2A...SRK 10/2A...SSL 2,5/2ASSL 4/2ASSL 6/2ASSL 10/2ASTKD 1...STK 2STK 1TK 2...TK 4...TK 10...TKS 4...TKS 10...TRK 1,5...TSK 2,5...VMAK 2,5
Width, mm568666
13-50556
5060805060106886581216202531366656668
12.2678
101216655568
10568
108888
7.59
7.511.25
6106
MarkersTerminal markers
BSTR 8
x
x
xx
xxxxxxx
x
xxxx
xx
xx
Tension-spring terminalsZIKD 2,5...ZIZAZMP 1,5ZRK 2,5...ZRK 4...ZRK 6...ZRK 10ZRK 16ZRKD 2,5...ZSL 2,5ZSL 4ZSL 6ZSL 10ZSL 16ZSLD 2,5...ZSLN 2,5...ZSRK 2,5...ZTRK 2,5...ZVMAK 2,5
BSTR 6 BSTR 8Width, mm555568
10125568
101255555
BSTR 10
x
xxxxxx
xxx
x
x
SB 4xxxxxxxxxxxxxxxxxxx
SB 5xxxxxxxxxxxxxxxxxxx
SB 6
xxxx
xxxx
SB 7,5 SB 8
xxx
xxx
BSTR 5
xxxxx
xxxx
BSTR 5 MIxxx
BSTR 10
SB 4xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxx
SB 5xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxx
SB 6
xxxxxx
x
xx
xxxxxx
xxxxxxxxx
xxxxxxxxxxxx
xxx
xxxxxxx
xxx
SB 7,5
xxxx
SB 8
x
x
x
x
xx
xxxxxxx
x
xxxx
xx
xx
BSTR 5
xx
xxx
xxx
xxxxxxxxx
xxx
x
xxxx
xxxxxxxx
xx
BSTR 5 MI
xx
xxx
xxx
xxxxxxxxx
xxx
x
xxxx
xxxxxxxxxxx
xx
BSTR 6
xx
xx
xxx
xxxxxxxx
xxx
x
xxxx
xxx
xxx
xx
336
Pressure-spring terminalsFDLISFRK 1.5FRK 2,5FRK 4FRKD 2,5FSL 1,5FSL 2,5FSL 4FSLD 2,5FTRK 2,5
Width, mm5456545655
MarkersTerminal markers
BSTR 8
End stopsEH 1EH 2-ZEH 4ES 15ES 32/35 CombiES 35ES 35/2/KES 35/K/STES 32ES 32/2/KES 32/K/STSH/SABZEH 1ZES 15ZES 35ZES 35/2
BSTR 6
x
xxxx
xxx
BSTR 8
x
xxxx
xxx
Width, mm758
7,59,57,58
9,57,58
9,59,511,1
565
BSTR 10
SB 4xxxxxxxxxxxxxxxx
SB 5xxxxxxxxxxxxxxxx
SB 6x
xxxxxxxxxx
x
SB 7,5 SB 8
x
x
xx
xxx
BSTR 5
x
xxxxxxxxxx
BSTR 5 MI
x
xxxxxxxxxx
BSTR 10
SB 4xxxxxxxxxx
SB 5x
xxx
xxxx
SB 6
x
x
SB 7,5 SB 8 BSTR 5
x
BSTR 5 MI
x
x
x
BSTR 6
Marker holderSchT 4/8SchT 6/12SchT 12SchT 11ZBA 1ZBA 2ZBA 2/ZZBA 2/Z/HZBA 3
BSTR 6
x
BSTR 8Width, mm556555555
SB 4xxxxxxxxx
SB 5xxxxxxxxx
SB 6
x
SB 7,5 SB 8 BSTR 5xxxxx
x
BSTR 5 MIxxxxxxxxx
BSTR 10
Marker holder
End stopsES 15ES 32/35CombiES 35ES 35/2/KES 35/K/STEs 32ES 32/2/KES 32/K/STZES 15ZES 35ZES 35/2
SchT2
xx
xx
x
SchT9
xx
xx
SchT10
x
x
SchT11
xx
xx
x
ZschT1xxxxxxxxxxxx
ZschT2xxxxxxxxxxxx
ZschT3
xx
xx
x
ZschT4
xx
xx
x
ZschT5
xx
xx
x
ZschT6
xx
xx
x
SchT4/8SchT6/12
xxxxxxxxxxxx
SchT7 longSchT7 short
xxxxxxxxxxxx
337
Marker holders for end stops
MA
RK
ING
SYS
TEM
S
Terminal markers – Pocket-Maxicard PMC SBCONTA-CONNECT
Pocket-Maxicard PMC SB 4The PMC SB 4 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 4 mm.
They are available in a variety of pre-printed stan-dard markers, in a blank version, or custom print-ed to any requirement.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC SB 4/50 WH4820.7PMC SB 4/50 So WH 4821.7
5 x 41050
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-12|23|1
> 4,1
Qty.
500
500
Cat. no.4822.74823.74824.74825.74826.74827.74828.74829.74830.74831.74832.74833.74834.74835.74836.74837.74838.74839.74840.74841.74842.74843.74844.74845.74846.74847.74848.74849.74850.74851.74852.74853.74854.74855.74856.74857.74858.7
4859.74860.74861.74862.74863.74864.74865.74866.74867.74868.74869.74870.74871.74872.74873.74874.74875.74876.7
PMC SB 4/...WH Pre-printed as shownTypePMC SB 4/50 FW 1-10
PMC SB 4/50 FW 11-20
PMC SB 4/50 FW 21-30
PMC SB 4/50 FW 31-40
PMC SB 4/50 FW 41-50
PMC SB 4/50 FW 51-60
PMC SB 4/50 FW 61-70
PMC SB 4/50 FW 71-80
PMC SB 4/50 FW 81-90
PMC SB 4/50 FW 91-100
PMC SB 4/50 FW 1-50
PMC SB 4/50 FW 51-100
PMC SB 4/50 FW 101-150
PMC SB 4/50 FW 151-200
PMC SB 4/50 FW 201-250
PMC SB 4/50 FW 251-300
PMC SB 4/50 FW 301-350
PMC SB 4/50 FW 351-400
PMC SB 4/50 FW 401-450
PMC SB 4/50 FW 451-500
PMC SB 4/50 FW 501-550
PMC SB 4/50 FW 551-600
PMC SB 4/50 FW 601-650
PMC SB 4/50 FW 651-700
PMC SB 4/50 FW 701-750
PMC SB 4/50 FW 751-800
PMC SB 4/50 FW 801-850
PMC SB 4/50 FW 851-900
PMC SB 4/50 FW 901-950
PMC SB 4/50 FW L1,L2,L3,N,PE
PMC SB 4/50 FW U1,V1,W1,N,PE
PMC SB 4/50 FW U1,V1,W1
PMC SB 4/50 FW U2,V2,W2,N,PE
PMC SB 4/50 FW U2,V2,W2
PMC SB 4/50 FW X1-X10
PMC SB 4/50 FW 1,3, 5-19
PMC SB 4/50 FW 2,4,6-20
PMC SB 4/50 FS 1-10
PMC SB 4/50 FS 11-20
PMC SB 4/50 FS 21-30
PMC SB 4/50 FS 31-40
PMC SB 4/50 FS 41-50
PMC SB 4/50 FS 51-60
PMC SB 4/50 FS 61-70
PMC SB 4/50 FS 71-80
PMC SB 4/50 FS 81-90
PMC SB 4/50 FS 91-100
PMC SB 4/50 FS 1-50
PMC SB 4/50 FS 51-100
PMC SB 4/50 FS 101-150
PMC SB 4/50 FS 151-200
PMC SB 4/50 FS 201-250
PMC SB 4/50 FS 251-300
PMC SB 4/50 FS 301-350
PMC SB 4/50 FS 351-400
Cat. no.4877.74878.74879.74880.74881.74882.74883.74884.74885.74886.74887.74888.74889.74890.74891.74892.74893.74894.7
4895.74896.74897.74898.74899.74916.74917.74918.74919.74920.74921.74922.74923.74924.74925.74926.74927.74928.7
4929.74930.74931.74932.74933.74934.74935.74936.74937.74938.74939.74940.74941.74942.74943.74944.74945.7
PMC SB 4/...WH Pre-printed as shownTypePMC SB 4/50 FS 401-450
PMC SB 4/50 FS 451-500
PMC SB 4/50 FS 501-550
PMC SB 4/50 FS 551-600
PMC SB 4/50 FS 601-650
PMC SB 4/50 FS 651-700
PMC SB 4/50 FS 701-750
PMC SB 4/50 FS 751-800
PMC SB 4/50 FS 801-850
PMC SB 4/50 FS 851-900
PMC SB 4/50 FS L1,L2,L3,N,PE
PMC SB 4/50 FS U1,V1,W1,N,PE
PMC SB 4/50 FS U1,V1,W1
PMC SB 4/50 FS U2,V2,W2,N,PE
PMC SB 4/50 FS U2,V2,W2
PMC SB 4/50 FS X1-X10
PMC SB 4/50 FS 1,3, 5-19
PMC SB 4/50 FS 2,4,6-20
PMC SB 4/50 GW 1
PMC SB 4/50 GW 2
PMC SB 4/50 GW 3
PMC SB 4/50 GW 4
PMC SB 4/50 GW 5
PMC SB 4/50 GW 6
PMC SB 4/50 GW 7
PMC SB 4/50 GW 8
PMC SB 4/50 GW 9
PMC SB 4/50 GW 0
PMC SB 4/50 GW X
PMC SB 4/50 GW PE
PMC SB 4/50 GW L1
PMC SB 4/50 GW L2
PMC SB 4/50 GW L3
PMC SB 4/50 GW N
PMC SB 4/50 GW +
PMC SB 4/50 GW -
PMC SB 4/50 GS 1
PMC SB 4/50 GS 2
PMC SB 4/50 GS 3
PMC SB 4/50 GS 4
PMC SB 4/50 GS 5
PMC SB 4/50 GS 6
PMC SB 4/50 GS 7
PMC SB 4/50 GS 8
PMC SB 4/50 GS 9
PMC SB 4/50 GS 0
PMC SB 4/50 GS X
PMC SB 4/50 GS PE
PMC SB 4/50 GS L1
PMC SB 4/50 GS L2
PMC SB 4/50 GS L3
PMC SB 4/50 GS N
PMC SB 4/50 GS -
PMC SB 4 GW
PMC SB 4 GS
Special print
338
.7
PMC SB 4 FW
PMC SB 4 FS
PMC SB 4 WH
PMC SB 4 So WH
PMC SB 5/50 WH4600.7PMC SB 5/50 So WH4819.7
47 x 10,35 x 5
1050
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-13|23|2
> 5.1
Qty.
500
500
PMC SB 5 FW
PMC SB 5 FS
Cat. no.4601.74602.74603.74604.74605.74606.74607.74608.74609.74610.74611.74612.74613.74614.74615.74616.74617.74618.74619.74620.74621.74622.74623.74624.74625.74626.74627.74628.74629.74817.74818.74630.74631.74632.74633.74634.74635.7
4636.74637.74638.74639.74640.74641.74642.74643.74644.74645.74646.74647.74648.74649.74650.74651.74652.74653.7
PMC SB 5/...WH Pre-printed as shownTypePMC SB 5/50 FW 1-10
PMC SB 5/50 FW 11-20
PMC SB 5/50 FW 21-30
PMC SB 5/50 FW 31-40
PMC SB 5/50 FW 41-50
PMC SB 5/50 FW 51-60
PMC SB 5/50 FW 61-70
PMC SB 5/50 FW 71-80
PMC SB 5/50 FW 81-90
PMC SB 5/50 FW 91-100
PMC SB 5/50 FW 1-50
PMC SB 5/50 FW 51-100
PMC SB 5/50 FW 101-150
PMC SB 5/50 FW 151-200
PMC SB 5/50 FW 201-250
PMC SB 5/50 FW 251-300
PMC SB 5/50 FW 301-350
PMC SB 5/50 FW 351-400
PMC SB 5/50 FW 401-450
PMC SB 5/50 FW 451-500
PMC SB 5/50 FW 501-550
PMC SB 5/50 FW 551-600
PMC SB 5/50 FW 601-650
PMC SB 5/50 FW 651-700
PMC SB 5/50 FW 701-750
PMC SB 5/50 FW 751-800
PMC SB 5/50 FW 801-850
PMC SB 5/50 FW 851-900
PMC SB 5/50 FW 901-950
PMC SB 5/50 FW 2,4,6-20
PMC SB 5/50 FW 1,3,5-19
PMC SB 5/50 FW L1,L2,L3,N,PE
PMC SB 5/50 FW U1,V1,W1,N,PE
PMC SB 5/50 FW U1,V1,W1
PMC SB 5/50 FW U2,V2,W2,N,PE
PMC SB 5/50 FW U2,V2,W2
PMC SB 5/50 FW X1-X10
PMC SB 5/50 FS 1-10
PMC SB 5/50 FS 11-20
PMC SB 5/50 FS 21-30
PMC SB 5/50 FS 31-40
PMC SB 5/50 FS 41-50
PMC SB 5/50 FS 51-60
PMC SB 5/50 FS 61-70
PMC SB 5/50 FS 71-80
PMC SB 5/50 FS 81-90
PMC SB 5/50 FS 91-100
PMC SB 5/50 FS 1-50
PMC SB 5/50 FS 51-100
PMC SB 5/50 FS 101-150
PMC SB 5/50 FS 151-200
PMC SB 5/50 FS 201-250
PMC SB 5/50 FS 251-300
PMC SB 5/50 FS 301-350
PMC SB 5/50 FS 351-400
Cat. no.4654.74655.74656.74657.74658.74659.74660.74661.74662.74663.74815.74816.74664.74665.74666.74667.74668.74669.7
4670.74671.74672.74673.74674.74675.74676.74677.74678.74679.74680.74681.74682.74683.74684.74685.74813.74814.7
4686.74687.74688.74689.74690.74691.74692.74693.74694.74695.74696.74697.74698.74699.74700.74701.74812.7
PMC SB 5/...WH Pre-printed as shownTypePMC SB 5/50 FS 401-450
PMC SB 5/50 FS 451-500
PMC SB 5/50 FS 501-550
PMC SB 5/50 FS 551-600
PMC SB 5/50 FS 601-650
PMC SB 5/50 FS 651-700
PMC SB 5/50 FS 701-750
PMC SB 5/50 FS 751-800
PMC SB 5/50 FS 801-850
PMC SB 5/50 FS 851-900
PMC SB 5/50 FS 2,4,6-20
PMC SB 5/50 FS 1,3,5-19
PMC SB 5/50 FS L1,L2,L3,N,PE
PMC SB 5/50 FS U1,V1,W1,N,PE
PMC SB 5/50 FS U1,V1,W1
PMC SB 5/50 FS U2,V2,W2,N,PE
PMC SB 5/50 FS U2,V2,W2
PMC SB 5/50 FS X1-X10
PMC SB 5/50 GW 1
PMC SB 5/50 GW 2
PMC SB 5/50 GW 3
PMC SB 5/50 GW 4
PMC SB 5/50 GW 5
PMC SB 5/50 GW 6
PMC SB 5/50 GW 7
PMC SB 5/50 GW 8
PMC SB 5/50 GW 9
PMC SB 5/50 GW 0
PMC SB 5/50 GW X
PMC SB 5/50 GW PE
PMC SB 5/50 GW L1
PMC SB 5/50 GW L2
PMC SB 5/50 GW L3
PMC SB 5/50 GW N
PMC SB 5/50 GW -
PMC SB 5/50 GW +
PMC SB 5/50 GS 1
PMC SB 5/50 GS 2
PMC SB 5/50 GS 3
PMC SB 5/50 GS 4
PMC SB 5/50 GS 5
PMC SB 5/50 GS 6
PMC SB 5/50 GS 7
PMC SB 5/50 GS 8
PMC SB 5/50 GS 9
PMC SB 5/50 GS 0
PMC SB 5/50 GS X
PMC SB 5/50 GS PE
PMC SB 5/50 GS L1
PMC SB 5/50 GS L2
PMC SB 5/50 GS L3
PMC SB 5/50 GS N
PMC SB 5/50 GS -
Pocket-Maxicard PMC SB 5The PMC SB 5 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 5 mm.
They are available in a variety of pre-printed stan-dard markers, in a blank version, or custom print-ed to any requirement.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC SB 5 GW
PMC SB 5 GS
Special print
339
MA
RK
ING
SYS
TEM
S
.7
PMC SB 5 WH
PMC SB 5 So WH
Terminal markers – Pocket-Maxicard PMC SBCONTA-CONNECT
Pocket-Maxicard PMC SB 6The PMC SB 6 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 6 mm.
They are available in a variety of pre-printed stan-dard markers, in a blank version, or custom print-ed to any requirement.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC SB 6/50 WH4702.7PMC SB 6/50 So WH4811.7
5 x 61050
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-13|23|2
> 6
Qty.
500
500
Cat. no.4703.74704.74705.74706.74707.74708.74709.74710.74711.74712.79212.79213.79214.79215.79216.79217.79218.79219.79220.79221.79222.79223.79224.79225.79226.79227.79228.79229.79230.79231.79232.79233.79234.79235.79236.79237.79238.79239.79240.79241.79242.79243.79244.79245.79246.79247.79248.79249.79250.79251.79252.79253.79254.79255.79256.79257.7
PMC SB 6/...WH Pre-printed as shownTypePMC SB 6/50 FW 1-10
PMC SB 6/50 FW 11-20
PMC SB 6/50 FW 21-30
PMC SB 6/50 FW 31-40
PMC SB 6/50 FW 41-50
PMC SB 6/50 FW 51-60
PMC SB 6/50 FW 61-70
PMC SB 6/50 FW 71-80
PMC SB 6/50 FW 81-90
PMC SB 6/50 FW 91-100
PMC SB 6/50 FW 101-110
PMC SB 6/50 FW 111-120
PMC SB 6/50 FW 121-130
PMC SB 6/50 FW 131-140
PMC SB 6/50 FW 141-150
PMC SB 6/50 FW 151-160
PMC SB 6/50 FW 161-170
PMC SB 6/50 FW 171-180
PMC SB 6/50 FW 181-190
PMC SB 6/50 FW 191-200
PMC SB 6/50 FW 201-210
PMC SB 6/50 FW 211-220
PMC SB 6/50 FW 221-230
PMC SB 6/50 FW 231-240
PMC SB 6/50 FW 241-250
PMC SB 6/50 FW 251-260
PMC SB 6/50 FW 261-270
PMC SB 6/50 FW 271-280
PMC SB 6/50 FW 281-290
PMC SB 6/50 FW 291-300
PMC SB 6/50 FW 301-310
PMC SB 6/50 FW 311-320
PMC SB 6/50 FW 321-330
PMC SB 6/50 FW 331-340
PMC SB 6/50 FW 341-350
PMC SB 6/50 FW 351-360
PMC SB 6/50 FW 361-370
PMC SB 6/50 FW 371-380
PMC SB 6/50 FW 381-390
PMC SB 6/50 FW 391-400
PMC SB 6/50 FW 401-410
PMC SB 6/50 FW 411-420
PMC SB 6/50 FW 421-430
PMC SB 6/50 FW 431-440
PMC SB 6/50 FW 441-450
PMC SB 6/50 FW 451-460
PMC SB 6/50 FW 461-470
PMC SB 6/50 FW 471-480
PMC SB 6/50 FW 481-490
PMC SB 6/50 FW 491-500
PMC SB 6/50 FW 501-510
PMC SB 6/50 FW 511-520
PMC SB 6/50 FW 521-530
PMC SB 6/50 FW 531-540
PMC SB 6/50 FW 541-550
PMC SB 6/50 FW 551-560
Cat. no.9258.79259.79260.79261.74713.74714.74715.74716.74717.74718.74719.74720.74721.74722.74723.74724.74725.74726.74727.74728.74729.74730.74731.74809.74810.74732.74733.74734.74735.74736.74737.7
4738.74739.74740.74741.74742.74743.74744.74745.74746.74747.79262.79263.79264.79265.79266.79267.79268.79269.79270.79271.79272.79273.7
PMC SB 6/...WH Pre-printed as shownTypePMC SB 6/50 FW 561-570
PMC SB 6/50 FW 571-580
PMC SB 6/50 FW 581-590
PMC SB 6/50 FW 591-600
PMC SB 6/50 FW 1-50
PMC SB 6/50 FW 51-100
PMC SB 6/50 FW 101-150
PMC SB 6/50 FW 151-200
PMC SB 6/50 FW 201-250
PMC SB 6/50 FW 251-300
PMC SB 6/50 FW 301-350
PMC SB 6/50 FW 351-400
PMC SB 6/50 FW 401-450
PMC SB 6/50 FW 451-500
PMC SB 6/50 FW 501-550
PMC SB 6/50 FW 551-600
PMC SB 6/50 FW 601-650
PMC SB 6/50 FW 651-700
PMC SB 6/50 FW 701-750
PMC SB 6/50 FW 751-800
PMC SB 6/50 FW 801-850
PMC SB 6/50 FW 851-900
PMC SB 6/50 FW 901-950
PMC SB 6/50 FW 2,4,6-20
PMC SB 6/50 FW 1,3,5-19
PMC SB 6/50 FW L1,L2,L3,N,PE
PMC SB 6/50 FW U1,V1,W1,N,PE
PMC SB 6/50 FW U1,V1,W1
PMC SB 6/50 FW U2,V2,W2,N,PE
PMC SB 6/50 FW U2,V2,W2
PMC SB 6/50 FW X1-X10
PMC SB 6/50 FS 1-10
PMC SB 6/50 FS 11-20
PMC SB 6/50 FS 21-30
PMC SB 6/50 FS 31-40
PMC SB 6/50 FS 41-50
PMC SB 6/50 FS 51-60
PMC SB 6/50 FS 61-70
PMC SB 6/50 FS 71-80
PMC SB 6/50 FS 81-90
PMC SB 6/50 FS 91-100
PMC SB 6/50 FS 101-110
PMC SB 6/50 FS 111-120
PMC SB 6/50 FS 121-130
PMC SB 6/50 FS 131-140
PMC SB 6/50 FS 141-150
PMC SB 6/50 FS 151-160
PMC SB 6/50 FS 161-170
PMC SB 6/50 FS 171-180
PMC SB 6/50 FS 181-190
PMC SB 6/50 FS 191-200
PMC SB 6/50 FS 201-210
PMC SB 6/50 FS 211-220
PMC SB 6 FW
PMC SB 6 FS
PMC SB 6 GW
PMC SB 6 GS
Special print
340
.7
PMC SB 6 WH
PMC SB 6 So WH
PMC SB 7,5/40 WH9326.7PMC SB 7,5/40 So WH 3327.7
5 x 7.58
40
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-14|12|3
> 7.5
Qty.
400
400
Cat. no.9274.79275.79276.79277.79278.79279.79280.79281.74748.74749.74750.74751.74752.74753.74754.74755.74756.74757.74758.74759.74760.74761.74762.74763.74764.74765.74807.74808.74766.74767.74768.74769.74770.74771.7
4772.74773.74774.74775.74776.74777.74778.74779.74780.74781.74782.74783.74784.74785.74786.74787.74805.74806.7
PMC SB 6/...WH Pre-printed as shownTypePMC SB 6/50 FS 221-230
PMC SB 6/50 FS 231-240
PMC SB 6/50 FS 241-250
PMC SB 6/50 FS 251-260
PMC SB 6/50 FS 261-270
PMC SB 6/50 FS 271-280
PMC SB 6/50 FS 281-290
PMC SB 6/50 FS 291-300
PMC SB 6/50 FS 1-50
PMC SB 6/50 FS 51-100
PMC SB 6/50 FS 101-150
PMC SB 6/50 FS 151-200
PMC SB 6/50 FS 201-250
PMC SB 6/50 FS 251-300
PMC SB 6/50 FS 301-350
PMC SB 6/50 FS 351-400
PMC SB 6/50 FS 401-450
PMC SB 6/50 FS 451-500
PMC SB 6/50 FS 501-550
PMC SB 6/50 FS 551-600
PMC SB 6/50 FS 601-650
PMC SB 6/50 FS 651-700
PMC SB 6/50 FS 701-750
PMC SB 6/50 FS 751-800
PMC SB 6/50 FS 801-850
PMC SB 6/50 FS 851-900
PMC SB 6/50 FS 2,4,6-20
PMC SB 6/50 FS 1,3,5-19
PMC SB 6/50 FS L1,L2,L3,N,PE
PMC SB 6/50 FS U1,V1,W1,N,PE
PMC SB 6/50 FS U1,V1,W1
PMC SB 6/50 FS U2,V2,W2,N,PE
PMC SB 6/50 FS U2,V2,W2
PMC SB 6/50 FS X1-X10
PMC SB 6/50 GW 1
PMC SB 6/50 GW 2
PMC SB 6/50 GW 3
PMC SB 6/50 GW 4
PMC SB 6/50 GW 5
PMC SB 6/50 GW 6
PMC SB 6/50 GW 7
PMC SB 6/50 GW 8
PMC SB 6/50 GW 9
PMC SB 6/50 GW 0
PMC SB 6/50 GW X
PMC SB 6/50 GW PE
PMC SB 6/50 GW L1
PMC SB 6/50 GW L2
PMC SB 6/50 GW L3
PMC SB 6/50 GW N
PMC SB 6/50 GW -
PMC SB 6/50 GW +
Pocket-Maxicard PMC SB 7,5The PMC SB 7,5 Pocket-Maxicard is suitable forlabelling all transformer terminals from the TKand TKS series (starting at page 198).They can also be used with transformer terminalsfrom other manufacturers (such as PHOENIXCONTACT, Wago or Adels). They are availableblank or with custom printing.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1.6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1.6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC SB 6 FW
PMC SB 6 FS
PMC SB 6 GW
PMC SB 6 GS
PMC SB 6/...WH Pre-printed as shownTypePMC SB 6/50 GS 1
PMC SB 6/50 GS 2
PMC SB 6/50 GS 3
PMC SB 6/50 GS 4
PMC SB 6/50 GS 5
PMC SB 6/50 GS 6
PMC SB 6/50 GS 7
PMC SB 6/50 GS 8
PMC SB 6/50 GS 9
PMC SB 6/50 GS 0
PMC SB 6/50 GS X
PMC SB 6/50 GS PE
PMC SB 6/50 GS L1
PMC SB 6/50 GS L2
PMC SB 6/50 GS L3
PMC SB 6/50 GS N
PMC SB 6/50 GS -
Cat. no.4788.74789.74790.74791.74792.74793.74794.74795.74796.74797.74798.74799.74800.74801.74802.74803.74804.7
Special print
341
MA
RK
ING
SYS
TEM
S
.7
PMC SB 7,5 WH
PMC SB 7,5 So WH
Terminal markers – Pocket-Maxicard PMC SBCONTA-CONNECT
Pocket-Maxicard PMC SB 8The PMC SB 8 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 8 mm.
They are available in a variety of pre-printed stan-dard markers, in a blank version, or custom print-ed to any requirement.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC SB 8/50 WH9323.7PMC SB 8/40 So WH9322.7
5 x 88
40
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-15|23|3
> 8
Qty.
400
400
Cat. no.9292.79293.79294.79295.79296.79297.79298.79299.79300.79301.79302.79303.79304.79305.79306.7
9289.79290.79291.7
9307.79308.79309.79310.79311.79312.79313.79314.79315.79316.79317.79318.79319.79320.79321.7
9286.79287.79288.7
PMC SB 8/...WH Pre-printed as shownTypePMC SB 8/40 FW 1-8
PMC SB 8/40 FW 9-16
PMC SB 8/40 FW 17-24
PMC SB 8/40 FW 25-32
PMC SB 8/40 FW 33-40
PMC SB 8/40 FW 41-48
PMC SB 8/40 FW 57-64
PMC SB 8/40 FW 65-72
PMC SB 8/40 FW 73-80
PMC SB 8/40 FW 81-88
PMC SB 8/40 FW 89-96
PMC SB 8/40 FW 97-104
PMC SB 8/40 FW 105-112
PMC SB 8/40 FW 49-56
PMC SB 8/40 FW 113-120
PMC SB 8/40 FW 1-40
PMC SB 8/40 FW 41-80
PMC SB 8/40 FW 81-120
PMC SB 8/40 FS 1-8
PMC SB 8/40 FS 9-16
PMC SB 8/40 FS 17-24
PMC SB 8/40 FS 25-32
PMC SB 8/40 FS 33-40
PMC SB 8/40 FS 41-48
PMC SB 8/40 FS 49-56
PMC SB 8/40 FS 57-64
PMC SB 8/40 FS 65-72
PMC SB 8/40 FS 73-80
PMC SB 8/40 FS 81-88
PMC SB 8/40 FS 89-96
PMC SB 8/40 FS 97-104
PMC SB 8/40 FS 105-112
PMC SB 8/40 FS 113-120
PMC SB 8/40 FS 1-40
PMC SB 8/40 FS 41-80
PMC SB 8/40 FS 81-120
PMC SB 8 FW
PMC SB 8 FS
Special print
342
.7
PMC SB 8 WH
PMC SB 8 So WH
Terminal markers – Pocket-Maxicard PMC BSTR
PMC BSTR 5/36 WH9000.7PMC BSTR 5/36 So WH 9001.7PMC BSTR 5/36 MI WH9324.7PMC BSTR 5/36 MI So WH9325.7
10 x 51236
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-12|36|2
> 5,1
Qty.
360
360
360
360
PMC BSTR 5 FW
PMC BSTR 5 FS
PMC BSTR 5 GW
PMC BSTR 5 GS
Cat. no.9002.79003.79004.79005.79006.79007.79008.79009.79010.79011.79012.79013.79014.79015.79016.79017.79018.79019.79020.79021.79022.79023.79024.79025.79026.79027.79028.79029.79030.79031.79032.79033.79034.79035.79036.7
9037.79038.79039.79040.79041.79042.79043.79044.79045.79046.79047.79048.79049.79050.79051.79052.79053.79054.79055.7
PMC BSTR 5/...WH Pre-printed as shownTypePMC BSTR 5/36 FW 1-12
PMC BSTR 5/36 FW 13-24
PMC BSTR 5/36 FW 25-36
PMC BSTR 5/36 FW 37-48
PMC BSTR 5/36 FW 49-60
PMC BSTR 5/36 FW 61-72
PMC BSTR 5/36 FW 73-84
PMC BSTR 5/36 FW 85-96
PMC BSTR 5/36 FW 97-108
PMC BSTR 5/36 FW 109-120
PMC BSTR 5/36 FW 1-36
PMC BSTR 5/36 FW 37-72
PMC BSTR 5/36 FW 73-108
PMC BSTR 5/36 FW 109-144
PMC BSTR 5/36 FW 145-180
PMC BSTR 5/36 FW 181-216
PMC BSTR 5/36 FW 217-252
PMC BSTR 5/36 FW 253-288
PMC BSTR 5/36 FW 289-324
PMC BSTR 5/36 FW 325-360
PMC BSTR 5/36 FW 361-396
PMC BSTR 5/36 FW 397-432
PMC BSTR 5/36 FW 433-468
PMC BSTR 5/36 FW 469-504
PMC BSTR 5/36 FW 505-540
PMC BSTR 5/36 FW 541-576
PMC BSTR 5/36 FW 577-612
PMC BSTR 5/36 FW 613-648
PMC BSTR 5/36 FW 649-684
PMC BSTR 5/36 FW L1,L2,L3,N,PE
PMC BSTR 5/36 FW U1,V1,W1,N,PE
PMC BSTR 5/36 FW U1,V1,W1
PMC BSTR 5/36 FW U2,V2,W2,N,PE
PMC BSTR 5/36 FW U2,V2,W2
PMC BSTR 5/36 FW X1-X12
PMC BSTR 5/36 FS 1-12
PMC BSTR 5/36 FS 13-24
PMC BSTR 5/36 FS 25-36
PMC BSTR 5/36 FS 37-48
PMC BSTR 5/36 FS 49-60
PMC BSTR 5/36 FS 61-72
PMC BSTR 5/36 FS 73-84
PMC BSTR 5/36 FS 85-96
PMC BSTR 5/36 FS 97-108
PMC BSTR 5/36 FS 109-120
PMC BSTR 5/36 FS 1-36
PMC BSTR 5/36 FS 37-72
PMC BSTR 5/36 FS 73-108
PMC BSTR 5/36 FS 109-144
PMC BSTR 5/36 FS 145-180
PMC BSTR 5/36 FS 181-216
PMC BSTR 5/36 FS 217-252
PMC BSTR 5/36 FS 253-288
PMC BSTR 5/36 FS 289-324
Cat. no.9056.79057.79058.79059.79060.79061.79062.79063.79064.79065.79066.79067.79068.79069.79070.7
9071.79072.79073.79074.79075.79076.79077.79078.79079.79080.79081.79082.79083.79084.79085.79086.79087.79088.7
9089.79090.79091.79092.79093.79094.79095.79096.79097.79098.79099.79100.79101.79102.79103.79104.79105.7
PMC BSTR 5 /...WH Pre-printed as shownTypePMC BSTR 5/36 FS 325-360
PMC BSTR 5/36 FS 361-396
PMC BSTR 5/36 FS 397-432
PMC BSTR 5/36 FS 433-468
PMC BSTR 5/36 FS 469-504
PMC BSTR 5/36 FS 505-540
PMC BSTR 5/36 FS 541-576
PMC BSTR 5/36 FS 577-612
PMC BSTR 5/36 FS 613-648
PMC BSTR 5/36 FS L1,L2,L3,N,PE
PMC BSTR 5/36 FS U1,V1,W1,N,PE
PMC BSTR 5/36 FS U1,V1,W1
PMC BSTR 5/36 FS U2,V2,W2,N,PE
PMC BSTR 5/36 FS U2,V2,W2
PMC BSTR 5/36 FS X1-X12
PMC BSTR 5/36 GW 1
PMC BSTR 5/36 GW 2
PMC BSTR 5/36 GW 3
PMC BSTR 5/36 GW 4
PMC BSTR 5/36 GW 5
PMC BSTR 5/36 GW 6
PMC BSTR 5/36 GW 7
PMC BSTR 5/36 GW 8
PMC BSTR 5/36 GW 9
PMC BSTR 5/36 GW 0
PMC BSTR 5/36 GW X
PMC BSTR 5/36 GW PE
PMC BSTR 5/36 GW L1
PMC BSTR 5/36 GW L2
PMC BSTR 5/36 GW L3
PMC BSTR 5/36 GW N
PMC BSTR 5/36 GW +
PMC BSTR 5/36 GW -
PMC BSTR 5/36 GS 1
PMC BSTR 5/36 GS 2
PMC BSTR 5/36 GS 3
PMC BSTR 5/36 GS 4
PMC BSTR 5/36 GS 5
PMC BSTR 5/36 GS 6
PMC BSTR 5/36 GS 7
PMC BSTR 5/36 GS 8
PMC BSTR 5/36 GS 9
PMC BSTR 5/36 GS 0
PMC BSTR 5/36 GS X
PMC BSTR 5/36 GS PE
PMC BSTR 5/36 GS L1
PMC BSTR 5/36 GS L2
PMC BSTR 5/36 GS L3
PMC BSTR 5/36 GS N
PMC BSTR 5/36 GS -
Pocket-Maxicard BSTR 5The BSTR 5 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 5 mm. These are particularly suitablefor longer sequences of characters.
The BSTR 5/… MI variants are fitted with a cen-trally positioned foot that is used when the stan-dard BSTR markers cover the cross-connectionchannel or the wire entry.They are available in a variety of standard, prefab-ricated markers.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.They can be delivered in the following colours:whiteMaterial Polyamide 6.6-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
Special print
Special print
343
MA
RK
ING
SYS
TEM
S
.7
PMC BSTR 5 WH
PMC BSTR 5 So WH
Terminal markers – Pocket-Maxicard PMC BSTRCONTA-CONNECT
Pocket-Maxicard PMC BSTR 6The BSTR 6 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that arewider than 6 mm.
These are particularly suitable for longersequences of characters.
They are available in a variety of standard, prefabri-cated markers.
The blank Pocket-Maxicards can easily be printedon using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1,6 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1,6 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC BSTR 6/30 WH9106.7PMC BSTR 6/30 So WH9107.7
12 x 61030
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-13|38|3
> 6
Qty.
300
300
PMC BSTR 6 FW
PMC BSTR 6 FS
PMC BSTR 6 GW
PMC BSTR 6 GS
Cat. no.9108.79109.79110.79111.79112.79113.79114.79115.79116.79117.79118.79119.79120.79121.79122.79123.79124.79125.79126.79127.79128.79129.79130.79131.79132.79133.79134.79135.79136.79137.79138.79139.79140.79141.79142.7
9143.79144.79145.79146.79147.79148.79149.79150.79151.79152.79153.79154.79155.79156.79157.79158.79159.79160.79161.7
PMC BSTR 6/...WH Pre-printed as shownTypePMC BSTR 6/30 FW 1-10
PMC BSTR 6/30 FW 11-20
PMC BSTR 6/30 FW 21-30
PMC BSTR 6/30 FW 31-40
PMC BSTR 6/30 FW 41-50
PMC BSTR 6/30 FW 51-60
PMC BSTR 6/30 FW 61-70
PMC BSTR 6/30 FW 71-80
PMC BSTR 6/30 FW 81-90
PMC BSTR 6/30 FW 91-100
PMC BSTR 6/30 FW 1-30
PMC BSTR 6/30 FW 31-60
PMC BSTR 6/30 FW 61-90
PMC BSTR 6/30 FW 91-120
PMC BSTR 6/30 FW 121-150
PMC BSTR 6/30 FW 151-180
PMC BSTR 6/30 FW 181-210
PMC BSTR 6/30 FW 211-240
PMC BSTR 6/30 FW 241-270
PMC BSTR 6/30 FW 271-300
PMC BSTR 6/30 FW 301-330
PMC BSTR 6/30 FW 331-360
PMC BSTR 6/30 FW 361-390
PMC BSTR 6/30 FW 391-420
PMC BSTR 6/30 FW 421-450
PMC BSTR 6/30 FW 451-480
PMC BSTR 6/30 FW 481-510
PMC BSTR 6/30 FW 511-540
PMC BSTR 6/30 FW 541-570
PMC BSTR 6/30 FW L1,L2,L3,N,PE
PMC BSTR 6/30 FW U1,V1,W1,N,PE
PMC BSTR 6/30 FW U1,V1,W1
PMC BSTR 6/30 FW U2,V2,W2,N,PE
PMC BSTR 6/30 FW U2,V2,W2
PMC BSTR 6/30 FW X1-X10
PMC BSTR 6/30 FS 1-10
PMC BSTR 6/30 FS 11-20
PMC BSTR 6/30 FS 21-30
PMC BSTR 6/30 FS 31-40
PMC BSTR 6/30 FS 41-50
PMC BSTR 6/30 FS 51-60
PMC BSTR 6/30 FS 61-70
PMC BSTR 6/30 FS 71-80
PMC BSTR 6/30 FS 81-90
PMC BSTR 6/30 FS 91-100
PMC BSTR 6/30 FS 1-30
PMC BSTR 6/30 FS 31-60
PMC BSTR 6/30 FS 61-90
PMC BSTR 6/30 FS 91-120
PMC BSTR 6/30 FS 121-150
PMC BSTR 6/30 FS 151-180
PMC BSTR 6/30 FS 181-210
PMC BSTR 6/30 FSS 211-240
PMC BSTR 6/30 FS 241-270
Cat. no.9162.79163.79164.79165.79166.79167.79168.79169.79170.79171.79172.79173.79174.79175.79176.7
9177.79178.79179.79180.79181.79182.79183.79184.79185.79186.79187.79188.79189.79190.79191.79192.79193.79194.7
9195.79196.79197.79198.79199.79200.79201.79202.79203.79204.79205.79206.79207.79208.79209.79210.79211.7
PMC BSTR 6 /...WH Pre-printed as shownTypePMC BSTR 6/30 FS 271-300
PMC BSTR 6/30 FS 301-330
PMC BSTR 6/30 FS 331-360
PMC BSTR 6/30 FS 361-390
PMC BSTR 6/30 FS 391-420
PMC BSTR 6/30 FS 421-450
PMC BSTR 6/30 FS 451-480
PMC BSTR 6/30 FS 481-510
PMC BSTR 6/30 FS 511-540
PMC BSTR 6/30 FS L1,L2,L3,N,PE
PMC BSTR 6/30 FS U1,V1,W1,N,PE
PMC BSTR 6/30 FS U1,V1,W1
PMC BSTR 6/30 FS U2,V2,W2,N,PE
PMC BSTR 6/30 FS U2,V2,W2
PMC BSTR 6/30 FS X1-X10
PMC BSTR 6/30 GW 1
PMC BSTR 6/30 GW 2
PMC BSTR 6/30 GW 3
PMC BSTR 6/30 GW 4
PMC BSTR 6/30 GW 5
PMC BSTR 6/30 GW 6
PMC BSTR 6/30 GW 7
PMC BSTR 6/30 GW 8
PMC BSTR 6/30 GW 9
PMC BSTR 6/30 GW 0
PMC BSTR 6/30 GW X
PMC BSTR 6/30 GW PE
PMC BSTR 6/30 GW L1
PMC BSTR 6/30 GW L2
PMC BSTR 6/30 GW L3
PMC BSTR 6/30 GW N
PMC BSTR 6/30 GW +
PMC BSTR 6/30 GW -
PMC BSTR 6/30 GS 1
PMC BSTR 6/30 GS 2
PMC BSTR 6/30 GS 3
PMC BSTR 6/30 GS 4
PMC BSTR 6/30 GS 5
PMC BSTR 6/30 GS 6
PMC BSTR 6/30 GS 7
PMC BSTR 6/30 GS 8
PMC BSTR 6/30 GS 9
PMC BSTR 6/30 GS 0
PMC BSTR 6/30 GS X
PMC BSTR 6/30 GS PE
PMC BSTR 6/30 GS L1
PMC BSTR 6/30 GS L2
PMC BSTR 6/30 GS L3
PMC BSTR 6/30 GS N
PMC BSTR 6/30 GS -
Special print
344
.7
PMC BSTR 6 WH
PMC BSTR 6 So WH
345
Terminal markers – Pocket-Maxicard PMCPocket-Maxicard PMC BSTR 8
The PMC BSTR 8 Pocket Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that are wider than8 mm.
These are particularly suitable for longer sequences of charac-ters.
They are available in a variety of pre-printed standard markers,in a blank version, or custom printed to any requirement.
The blank Pocket-Maxicards can easily be printed on using theEMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1.4 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1.4 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC BSTR 8x12/21 WH9410.7PMC BSTR 8x12/21 So WH9411.7
12 x 87
21
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-16|59|4
> 8
Qty.
210
210
Cat. no.9413.79414.79415.79416.79417.79418.79419.79420.79421.79422.7
9423.79424.79425.79426.79427.79428.79429.79430.79431.79432.7
PMC BSTR 8/... WHPre-printed as shownTypePMC BSTR 8x12/21 FW 1-21
PMC BSTR 8x12/21 FW 22-42
PMC BSTR 8x12/21 FW 43-63
PMC BSTR 8x12/21 FW 64-84
PMC BSTR 8x12/21 FW 84-105
PMC BSTR 8x12/21 FW 1-42
PMC BSTR 8x12/21 FW 43-84
PMC BSTR 8x12/21 FW 1-105
PMC BSTR 8x12/21 FW 106-210
PMC BSTR 8x12/21 FW L1,L2,L3,N,PE
PMC BSTR 8x12/21 FS 1-21
PMC BSTR 8x12/21 FS 22-42
PMC BSTR 8x12/21 FS 43-63
PMC BSTR 8x12/21 FS 64-84
PMC BSTR 8x12/21 FS 84-105
PMC BSTR 8x12/21 FS 1-42
PMC BSTR 8x12/21 FS 43-84
PMC BSTR 8x12/21 FS 1-105
PMC BSTR 8x12/21 FS 106-210
PMC BSTR 8x12/21 FS L1,L2,L3,N,PE
PMC BSTR 8x12 FW
PMC BSTR 8x12 FS
Special print
MA
RK
ING
SYS
TEM
S
.7
PMC BSTR 8x12 WH
PMC BSTR 8x12 So WH
Terminal markers – Pocket-Maxicard PMC BSTRCONTA-CONNECT
Pocket-Maxicard PMC BSTR 10The PMC BSTR 10 Pocket-Maxicard is suitable forlabelling all CONTA-CLIP terminal blocks that are widerthan 10 mm.
These are particularly suitable for longer sequences ofcharacters.
They are available in a variety of pre-printed standardmarkers, in a blank version, or custom printed to anyrequirement.
The blank Pocket-Maxicards can easily be printed on usingthe EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penNumber of characters | lines when using font size 1.4 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 1.4 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
PMC BSTR 10x12/10 WH9433.7PMC BSTR 10x12/10 SO WH9434.7
12 x 105
10
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-18|59|5
> 10
Qty.
100
100
Cat. no.9436.79437.79438.79439.79440.79441.79442.79443.79444.79445.7
9446.79447.79448.79449.79450.79451.79452.79453.79454.79455.7
PMC BSTR 10x12/... WH Pre-printed as shownTypePMC BSTR 10x12/10 FW 1-10
PMC BSTR 10x12/10 FW 11-20
PMC BSTR 10x12/10 FW 22-30
PMC BSTR 10x12/10 FW 31-40
PMC BSTR 10x12/10 FW 41-50
PMC BSTR 10x12/10 FW 1-40
PMC BSTR 10x12/10 FW 41-80
PMC BSTR 10x12/10 FW 81-120
PMC BSTR 10x12/10 FW 1-100
PMC BSTR 10x12/10 FW L1,L2,L3,N,PE
PMC BSTR 10x12/10 FS 1-10
PMC BSTR 10x12/10 FS 11-20
PMC BSTR 10x12/10 FS 22-30
PMC BSTR 10x12/10 FS 31-40
PMC BSTR 10x12/10 FS 41-50
PMC BSTR 10x12/10 FS 1-40
PMC BSTR 10x12/10 FS 41-80
PMC BSTR 10x12/10 FS 81-120
PMC BSTR 10x12/10 FS 1-100
PMC BSTR 10x12/10 FS L1,L2,L3,N,PE
PMC BSTR 10x12 FW
PMC BSTR 10x12 FS
Special print
346
.7
PMC BSTR 10x12 WH
PMC BSTR 10x12 So WH
347
Notes
MA
RK
ING
SYS
TEM
S
Terminal markers – Quick marking system SBCONTA-CONNECT
Quick marking system SB 5The SB 5 quick marking system is suitable forlabelling all CONTA-CLIP terminals that arewider than 5 mm.
They are available in a variety of standard, pre-fabricated markers or with custom labelling.
The blank SB 5 markers are also available asMC SB 5/200 WH (3300.7 on p. 356). Theycan easily be printed on using the EMS plottersystem.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours availableCharacteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penPlotter
ApplicationTerminal width, mm
SB 5 So WH
SB 5/10 WH 2430.0SB 5/10 So WH2431.7
5 x 510-
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-1
EMS-2
≥ 5
Qty.
250
SB 5/...WH Pre-printed as shownTypeSB 5/10 FW 1-10SB 5/10 FW 11-20SB 5/10 FW 21-30SB 5/10 FW 31-40SB 5/10 FW 41-50SB 5/10 FW 51-60SB 5/10 FW 61-70SB 5/10 FW 71-80SB 5/10 FW 81-90SB 5/10 FW 91-100SB 5/10 FW X1; Y1; Z1SB 5/10 FW X2; Y2; Z2SB 5/10 FW X3; Y3; Z3SB 5/10 FW X4; Y4; Z4SB 5/10 FW X5; Y5; Z5SB 5/10 FW X6; Y6; Z6SB 5/10 FW X7; Y7; Z7SB 5/10 FW X8; Y8; Z8SB 5/10 FW X9; Y9; Z9SB 5/10 FW X10; Y10; Z10SB 5/10 FW R1; S1; T1SB 5/10 FW R2; S2; T2SB 5/10 FW R3; S3; T3SB 5/10 FW R4; S4; T4SB 5/10 FW R5; S5; T5SB 5/10 FW R6; S6; T6SB 5/10 FW R7; S7; T7SB 5/10 FW R8; S8; T8SB 5/10 FW R9; S9; T9SB 5/10 FW R10; S10; T10SB 5/10 FW U1; V1; W1SB 5/10 FW U2; V2; W2SB 5/10 FW U3; V3; W3SB 5/10 FW U4; V4; W4SB 5/10 FW U5; V5; W5SB 5/10 FW U6; V6; W6SB 5/10 FW U7; V7; W7SB 5/10 FW U8; V8; W8SB 5/10 FW U9; V9; W9SB 5/10 FW U10; V10; W10SB 5/10 FW U; V; W; N; PESB 5/10 FW R; S; T; N; Earth with circuitSB 5/10 FW L1; L2; L3; N; PESB 5/10 FW L1; L2; L3; N;Earth with circuit
SB 5/10 FS 1-10SB 5/10 FS 11-20SB 5/10 FS 21-30SB 5/10 FS 31-40SB 5/10 FS 41-50SB 5/10 FS 51-60SB 5/10 FS 61-70SB 5/10 FS 71-80SB 5/10 FS 81-90SB 5/10 FS 91-100
SB 5/10 FS X1; Y1; Z1SB 5/10 FS X2; Y2; Z2 SB 5/10 FS X3; Y3; Z3SB 5/10 FS X4; Y4; Z4SB 5/10 FS X5; Y5; Z5SB 5/10 FS X6; Y6; Z6SB 5/10 FS X7; Y7; Z7SB 5/10 FS X8; Y8; Z8SB 5/10 FS X9; Y9; Z9SB 5/10 FS X10; Y10; Z10 SB 5/10 FS R1; S1; T1SB 5/10 FS R2; S2; T2 SB 5/10 FS R3; S3; T3SB 5/10 FS R4; S4; T4SB 5/10 FS R5; S5; T5SB 5/10 FS R6; S6; T6SB 5/10 FS R7; S7; T7SB 5/10 FS R8; S8; T8SB 5/10 FS R9; S9; T9SB 5/10 FS R10; S10; T10
Cat. no.2431.00012431.00022431.00032431.00042431.00052431.00062431.00072431.00082431.00092431.00102404.00012404.00022404.00032404.00042404.00052404.00062404.00072404.00082404.00092404.00102404.00112404.00122404.00132404.00142404.00152404.00162404.00172404.00182404.00192404.00202404.00212404.00222404.00232404.00242404.00252404.00262404.00272404.00282404.00292404.00302471.00012471.00022471.00032471.0004
2433.00012433.00022433.00032433.00042433.00052433.00062433.00072433.00082433.00092433.0010
2472.00012472.00022472.00032472.00042472.00052472.00062472.00072472.00082472.00092472.00102472.00112472.00122472.00132472.00142472.00152472.00162472.00172472.00182472.00192472.0020
SB 5/...WH Pre-printed as shownTypeSB 5/10 FS U1; V1; W1SB 5/10 FS U2; V2; W2 SB 5/10 FS U3; V3; W3SB 5/10 FS U4; V4; W4SB 5/10 FS U5; V5; W5SB 5/10 FS U6; V6; W6SB 5/10 FS U7; V7; W7SB 5/10 FS U8; V8; W8SB 5/10 FS U9; V9; W9SB 5/10 FS U10; V10; W10SB 5/10 FS U; V; W; N; PESB 5/10 FS R; S; T; N; Earth with circuitSB 5/10 FS L1; L2; L3; N; PESB 5/10 FW L1; L2; L3; N;Earth with circuit
SB 5/10 GW 1SB 5/10 GW 2SB 5/10 GW 3SB 5/10 GW 4SB 5/10 GW 5SB 5/10 GW 6SB 5/10 GW 7SB 5/10 GW 8SB 5/10 GW 9SB 5/10 GW 10SB 5/10 GW 11SB 5/10 GW 12SB 5/10 GW 13SB 5/10 GW 14SB 5/10 GW 15SB 5/10 GW 16SB 5/10 GW 17SB 5/10 GW 18SB 5/10 GW 19SB 5/10 GW 20SB 5/10 GW 21SB 5/10 GW 22SB 5/10 GW 23SB 5/10 GW 24SB 5/10 GW 25SB 5/10 GW 26SB 5/10 GW 27SB 5/10 GW 28SB 5/10 GW 29SB 5/10 GW 30SB 5/10 GW 31SB 5/10 GW 32SB 5/10 GW 33SB 5/10 GW 34SB 5/10 GW 35SB 5/10 GW 36SB 5/10 GW 37SB 5/10 GW 38SB 5/10 GW 39SB 5/10 GW 40SB 5/10 GW 41SB 5/10 GW 42SB 4/50 GW 43SB 5/10 GW 44SB 5/10 GW 45SB 5/10 GW 46SB 5/10 GW 47SB 5/10 GW 48SB 5/10 GW 49SB 5/10 GW 50SB 5/10 GW 51SB 5/10 GW 52SB 5/10 GW 53SB 5/10 GW 54SB 5/10 GW 55SB 5/10 GW 56SB 5/10 GW 57SB 5/10 GW 58SB 5/10 GW 59SB 5/10 GW 60SB 5/10 GW 61SB 5/10 GW 62
Cat. no.2472.00212472.00222472.00232472.00242472.00252472.00262472.00272472.00282472.00292472.00302473.00012473.00022473.00032473.0004
2432.00012432.00022432.00032432.00042432.00052432.00062432.00072432.00082432.00092432.00102432.00112432.00122432.00132432.00142432.00152432.00162432.00172432.00182432.00192432.00202432.00212432.00222432.00232432.00242432.00252432.00262432.00272432.00282432.00292432.00302432.00312432.00322432.00332432.00342432.00352432.00362432.00372432.00382432.00392432.00402432.00412432.00422432.00432432.00442432.00452432.00462432.00472432.00482432.00492432.00502432.00512432.00522432.00532432.00542432.00552432.00562432.00572432.00582432.00592432.00602432.00612432.0062
Special print
SB 5 FW
348
.7
SB 5/...WH Pre-printed as shownTypeSB 5/10 GW 63SB 5/10 GW 64SB 5/10 GW 65SB 5/10 GW 66SB 5/10 GW 67SB 5/10 GW 68SB 5/10 GW 69SB 5/10 GW 70SB 5/10 GW 71SB 5/10 GW 72SB 5/10 GW 73SB 5/10 GW 74SB 5/10 GW 75SB 5/10 GW 76SB 5/10 GW 77SB 5/10 GW 78SB 5/10 GW 79SB 5/10 GW 80SB 5/10 GW 81SB 5/10 GW 82SB 5/10 GW 83SB 5/10 GW 84SB 5/10 GW 85SB 5/10 GW 86SB 5/10 GW 87SB 5/10 GW 88SB 5/10 GW 89SB 5/10 GW 90SB 5/10 GW 91SB 5/10 GW 92SB 5/10 GW 93SB 5/10 GW 94SB 5/10 GW 95SB 5/10 GW 96SB 5/10 GW 97SB 5/10 GW 98SB 5/10 GW 99SB 5/10 GW 100
SB 5/10 GW ASB 5/10 GW BSB 5/10 GW CSB 5/10 GW DSB 5/10 GW ESB 5/10 GW FSB 5/10 GW GSB 5/10 GW HSB 5/10 GW ISB 5/10 GW JSB 5/10 GW KSB 5/10 GW LSB 5/10 GW MSB 5/10 GW NSB 5/10 GW OSB 5/10 GW PSB 5/10 GW QSB 5/10 GW RSB 5/10 GW SSB 5/10 GW TSB 5/10 GW USB 5/10 GW VSB 5/10 GW WSB 5/10 GW XSB 5/10 GW YSB 5/10 GW ZSB 5/10 GW PESB 5/10 GW PENSB 5/10 GW MPSB 5/10 GW SLSB 5/10 GW T1SB 5/10 GW T2SB 5/10 GW T3SB 5/10 GW +SB 5/10 GW -SB 5/10 GW ~SB 5/10 GW EarthSB 5/10 GW Earth with circuit
SB 5/...WH Pre-printed as shownTypeSB 5/10 GS 1SB 5/10 GS 2SB 5/10 GS 3SB 5/10 GS 4SB 5/10 GS 5SB 5/10 GS 6SB 5/10 GS 7SB 5/10 GS 8SB 5/10 GS 9SB 5/10 GS 10SB 5/10 GS 11SB 5/10 GS 12SB 5/10 GS 13SB 5/10 GS 14SB 5/10 GS 15SB 5/10 GS 16SB 5/10 GS 17SB 5/10 GS 18SB 5/10 GS 19SB 5/10 GS 20SB 5/10 GS 21SB 5/10 GS 22SB 5/10 GS 23SB 5/10 GS 24SB 5/10 GS 25SB 5/10 GS 26SB 5/10 GS 27SB 5/10 GS 28SB 5/10 GS 29SB 5/10 GS 30SB 5/10 GS 31SB 5/10 GS 32SB 5/10 GS 33SB 5/10 GS 34SB 5/10 GS 35SB 5/10 GS 36SB 5/10 GS 37SB 5/10 GS 38SB 5/10 GS 39SB 5/10 GS 40SB 5/10 GS 41SB 5/10 GS 42SB 5/10 GS 43SB 5/10 GS 44SB 5/10 GS 45SB 5/10 GS 46SB 5/10 GS 47SB 5/10 GS 48SB 5/10 GS 49SB 5/10 GS 50SB 5/10 GS 51SB 5/10 GS 52SB 5/10 GS 53SB 5/10 GS 54SB 5/10 GS 55SB 5/10 GS 56SB 5/10 GS 57SB 5/10 GS 58SB 5/10 GS 59SB 5/10 GS 60SB 5/10 GS 61SB 5/10 GS 62SB 5/10 GS 63SB 5/10 GS 64SB 5/10 GS 65SB 5/10 GS 66SB 5/10 GS 67SB 5/10 GS 68SB 5/10 GS 69SB 5/10 GS 70SB 5/10 GS 71SB 5/10 GS 72SB 5/10 GS 73SB 5/10 GS 74SB 5/10 GS 75SB 5/10 GS 76SB 5/10 GS 77SB 5/10 GS 78
SB 5/...WH Pre-printed as shownTypeSB 5/10 GS 79SB 5/10 GS 80SB 5/10 GS 81SB 5/10 GS 82SB 5/10 GS 83SB 5/10 GS 84SB 5/10 GS 85SB 5/10 GS 86SB 5/10 GS 87SB 5/10 GS 88SB 5/10 GS 89SB 5/10 GS 90SB 5/10 GS 91SB 5/10 GS 92SB 5/10 GS 93SB 5/10 GS 94SB 5/10 GS 95SB 5/10 GS 96SB 5/10 GS 97SB 5/10 GS 98SB 5/10 GS 99SB 5/10 GS 100
SB 5/10 GS ASB 5/10 GS BSB 5/10 GS CSB 5/10 GS DSB 5/10 GS ESB 5/10 GS FSB 5/10 GS GSB 5/10 GS HSB 5/10 GS ISB 5/10 GS JSB 5/10 GS KSB 5/10 GS LSB 5/10 GS MSB 5/10 GS NSB 5/10 GS OSB 5/10 GS PSB 5/10 GS QSB 5/10 GS RSB 5/10 GS SSB 5/10 GS TSB 5/10 GS USB 5/10 GS VSB 5/10 GS WSB 5/10 GS XSB 5/10 GS YSB 5/10 GS ZSB 5/10 GS PESB 5/10 GS PENSB 5/10 GS MPSB 5/10 GS SLSB 5/10 GS T1SB 5/10 GS T2SB 5/10 GS T3SB 5/10 GS +SB 5/10 GS -SB 5/10 GS ~SB 5/10 GS EarthSB 5/10 GS Earth with circuit
Cat. no.2432.00632432.00642432.00652432.00662432.00672432.00682432.00692432.00702432.00712432.00722432.00732432.00742432.00752432.00762432.00772432.00782432.00792432.00802432.00812432.00822432.00832432.00842432.00852432.00862432.00872432.00882432.00892432.00902432.00912432.00922432.00932432.00942432.00952432.00962432.00972432.00982432.00992432.0100
2474.00012474.00022474.00032474.00042474.00052474.00062474.00072474.00082474.00092474.00102474.00112474.00122474.00132474.00142474.00152474.00162474.00172474.00182474.00192474.00202474.00212474.00222474.00232474.00242474.00252474.00262474.00272474.00282474.00292474.00302474.00312474.00322474.00332474.00342474.00352474.00362474.00372474.0038
Cat. no.2434.00012434.00022434.00032434.00042434.00052434.00062434.00072434.00082434.00092434.00102434.00112434.00122434.00132434.00142434.00152434.00162434.00172434.00182434.00192434.00202434.00212434.00222434.00232434.00242434.00252434.00262434.00272434.00282434.00292434.00302434.00312434.00322434.00332434.00342434.00352434.00362434.00372434.00382434.00392434.00402434.00412434.00422434.00432434.00442434.00452434.00462434.00472434.00482434.00492434.00502434.00512434.00522434.00532434.00542434.00552434.00562434.00572434.00582434.00592434.00602434.00612434.00622434.00632434.00642434.00652434.00662434.00672434.00682434.00692434.00702434.00712434.00722434.00732434.00742434.00752434.00762434.00772434.0078
Cat. no.2434.00792434.00802434.00812434.00822434.00832434.00842434.00852434.00862434.00872434.00882434.00892434.00902434.00912434.00922434.00932434.00942434.00952434.00962434.00972434.00982434.00992434.0100
2475.00012475.00022475.00032475.00042475.00052475.00062475.00072475.00082475.00092475.00102475.00112475.00122475.00132475.00142475.00152475.00162475.00172475.00182475.00192475.00202475.00212475.00222475.00232475.00242475.00252475.00262475.00272475.00282475.00292475.00302475.00312475.00322475.00332475.00342475.00352475.00362475.00372475.0038
SB 5 FS SB 5 GW SB 5 GS
349
MA
RK
ING
SYS
TEM
S
Terminal markers – Quick marking system SBCONTA-CONNECT
Quick marking system SB 6The SB 6 quick marking system is suitable forlabelling all CONTA-CLIP terminals that arewider than 6 mm.
They are available in a variety of standard, pre-fabricated markers or with custom labelling.
The blank SB 6 markers are also available as MCSB 6/200 WH (3301.7 on p. 356). They can easi-ly be printed on using the EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours availableCharacteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penPlotter
ApplicationTerminal width, mm
SB 6/10 WH 2035.0SB 6/10 So WH 2036.7
5 x 610-
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-1
EMS-2
≥ 6
Qty.
250
SB 6/...WH Pre-printed as shownTypeSB 6/10 FW 1-10SB 6/10 FW 11-20SB 6/10 FW 21-30SB 6/10 FW 31-40SB 6/10 FW 41-50SB 6/10 FW 51-60SB 6/10 FW 61-70SB 6/10 FW 71-80SB 6/10 FW 81-90SB 6/10 FW 91-100SB 6/10 FW X1; Y1; Z1SB 6/10 FW X2; Y2; Z2SB 6/10 FW X3; Y3; Z3SB 6/10 FW X4; Y4; Z4SB 6/10 FW X5; Y5; Z5SB 6/10 FW X6; Y6; Z6SB 6/10 FW X7; Y7; Z7SB 6/10 FW X8; Y8; Z8SB 6/10 FW X9; Y9; Z9SB 5/10 FW X10; Y10; Z10SB 6/10 FW R1; S1; T1SB 6/10 FW R2; S2; T2SB 6/10 FW R3; S3; T3SB 6/10 FW R4; S4; T4SB 6/10 FW R5; S5; T5SB 6/10 FW R6; S6; T6SB 6/10 FW R7; S7; T7SB 6/10 FW R8; S8; T8SB 6/10 FW R9; S9; T9SB 6/10 FW R10; S10; T10SB 6/10 FW U1; V1; W1SB 6/10 FW U2; V2; W2SB 6/10 FW U3; V3; W3SB 6/10 FW U4; V4; W4SB 6/10 FW U5; V5; W5SB 6/10 FW U6; V6; W6SB 6/10 FW U7; V7; W7SB 6/10 FW U8; V8; W8SB 6/10 FW U9; V9; W9SB 6/10 FW U10; V10; W10SB 6/10 FW U; V; W; N; PESB 6/10 FW R; S; T; N; Earth with circuitSB 6/10 FW L1; L2; L3; N; PESB 6/10 FW L1; L2; L3; N;Earth with circuit
SB 6/10 FS 1-10SB 6/10 FS 11-20SB 6/10 FS 21-30SB 6/10 FS 31-40SB 6/10 FS 41-50SB 6/10 FS 51-60SB 6/10 FS 61-70SB 6/10 FS 71-80SB 6/10 FS 81-90SB 6/10 FS 91-100
SB 6/10 FS X1; Y1; Z1SB 6/10 FS X2; Y2; Z2 SB 6/10 FS X3; Y3; Z3SB 6/10 FS X4; Y4; Z4SB 6/10 FS X5; Y5; Z5SB 6/10 FS X6; Y6; Z6SB 6/10 FS X7; Y7; Z7SB 6/10 FS X8; Y8; Z8SB 6/10 FS X9; Y9; Z9SB 6/10 FS X10; Y10; Z10 SB 6/10 FS R1; S1; T1SB 6/10 FS R2; S2; T2 SB 6/10 FS R3; S3; T3SB 6/10 FS R4; S4; T4SB 6/10 FS R5; S5; T5SB 6/10 FS R6; S6; T6SB 6/10 FS R7; S7; T7SB 6/10 FS R8; S8; T8SB 6/10 FS R9; S9; T9SB 6/10 FS R10; S10; T10
Cat. no.2036.00012036.00022036.00032036.00042036.00052036.00062036.00072036.00082036.00092036.00102989.00012989.00022989.00032989.00042989.00052989.00062989.00072989.00082989.00092989.00102989.00112989.00122989.00132989.00142989.00152989.00162989.00172989.00182989.00192989.00202989.00212989.00222989.00232989.00242989.00252989.00262989.00272989.00282989.00292989.00302040.00012040.00022040.00032040.0004
2037.00012037.00022037.00032037.00042037.00052037.00062037.00072037.00082037.00092037.0010
2990.00012990.00022990.00032990.00042990.00052990.00062990.00072990.00082990.00092990.00102990.00112990.00122990.00132990.00142990.00152990.00162990.00172990.00182990.00192990.0020
SB 6/...WH Pre-printed as shownTypeSB 6/10 FS U1; V1; W1SB 6/10 FS U2; V2; W2 SB 6/10 FS U3; V3; W3SB 6/10 FS U4; V4; W4SB 6/10 FS U5; V5; W5SB 6/10 FS U6; V6; W6SB 6/10 FS U7; V7; W7SB 6/10 FS U8; V8; W8SB 6/10 FS U9; V9; W9SB 6/10 FS U10; V10; W10SB 6/10 FS U; V; W; N; PESB 6/10 FS R; S; T; N; Earth with circuitSB 6/10 FS L1; L2; L3; N; PESB 6/10 FW L1; L2; L3; N;Earth with circuit
SB 6/10 GW 1SB 6/10 GW 2SB 6/10 GW 3SB 6/10 GW 4SB 6/10 GW 5SB 6/10 GW 6SB 6/10 GW 7SB 6/10 GW 8SB 6/10 GW 9SB 6/10 GW 10SB 6/10 GW 11SB 6/10 GW 12SB 6/10 GW 13SB 6/10 GW 14SB 6/10 GW 15SB 6/10 GW 16SB 6/10 GW 17SB 6/10 GW 18SB 6/10 GW 19SB 6/10 GW 20SB 6/10 GW 21SB 6/10 GW 22SB 6/10 GW 23SB 6/10 GW 24SB 6/10 GW 25SB 6/10 GW 26SB 6/10 GW 27SB 6/10 GW 28SB 6/10 GW 29SB 6/10 GW 30SB 6/10 GW 31SB 6/10 GW 32SB 6/10 GW 33SB 6/10 GW 34SB 6/10 GW 35SB 6/10 GW 36SB 6/10 GW 37SB 6/10 GW 38SB 6/10 GW 39SB 6/10 GW 40SB 6/10 GW 41SB 6/10 GW 42SB 4/50 GW 43SB 6/10 GW 44SB 6/10 GW 45SB 6/10 GW 46SB 6/10 GW 47SB 6/10 GW 48SB 6/10 GW 49SB 6/10 GW 50SB 6/10 GW 51SB 6/10 GW 52SB 6/10 GW 53SB 6/10 GW 54SB 6/10 GW 55SB 6/10 GW 56SB 6/10 GW 57SB 6/10 GW 58SB 6/10 GW 59SB 6/10 GW 60SB 6/10 GW 61SB 6/10 GW 62
Cat. no.2990.00212990.00222990.00232990.00242990.00252990.00262990.00272990.00282990.00292990.00302149.00012149.00022149.00032149.0004
2102.00012102.00022102.00032102.00042102.00052102.00062102.00072102.00082102.00092102.00102102.00112102.00122102.00132102.00142102.00152102.00162102.00172102.00182102.00192102.00202102.00212102.00222102.00232102.00242102.00252102.00262102.00272102.00282102.00292102.00302102.00312102.00322102.00332102.00342102.00352102.00362102.00372102.00382102.00392102.00402102.00412102.00422102.00432102.00442102.00452102.00462102.00472102.00482102.00492102.00502102.00512102.00522102.00532102.00542102.00552102.00562102.00572102.00582102.00592102.00602102.00612102.0062
350
SB 6 FW
.7
Special print
SB 6 So WH
SB 6/...WH Pre-printed as shownTypeSB 6/10 GW 63SB 6/10 GW 64SB 6/10 GW 65SB 6/10 GW 66SB 6/10 GW 67SB 6/10 GW 68SB 6/10 GW 69SB 6/10 GW 70SB 6/10 GW 71SB 6/10 GW 72SB 6/10 GW 73SB 6/10 GW 74SB 6/10 GW 75SB 6/10 GW 76SB 6/10 GW 77SB 6/10 GW 78SB 6/10 GW 79SB 6/10 GW 80SB 6/10 GW 81SB 6/10 GW 82SB 6/10 GW 83SB 6/10 GW 84SB 6/10 GW 85SB 6/10 GW 86SB 6/10 GW 87SB 6/10 GW 88SB 6/10 GW 89SB 6/10 GW 90SB 6/10 GW 91SB 6/10 GW 92SB 6/10 GW 93SB 6/10 GW 94SB 6/10 GW 95SB 6/10 GW 96SB 6/10 GW 97SB 6/10 GW 98SB 6/10 GW 99SB 6/10 GW 100
SB 6/10 GW ASB 6/10 GW BSB 6/10 GW CSB 6/10 GW DSB 6/10 GW ESB 6/10 GW FSB 6/10 GW GSB 6/10 GW HSB 6/10 GW ISB 6/10 GW JSB 6/10 GW KSB 6/10 GW LSB 6/10 GW MSB 6/10 GW NSB 6/10 GW OSB 6/10 GW PSB 6/10 GW QSB 6/10 GW RSB 6/10 GW SSB 6/10 GW TSB 6/10 GW USB 6/10 GW VSB 6/10 GW WSB 6/10 GW XSB 6/10 GW YSB 6/10 GW ZSB 6/10 GW PESB 6/10 GW PENSB 6/10 GW MPSB 6/10 GW SLSB 6/10 GW T1SB 6/10 GW T2SB 6/10 GW T3SB 6/10 GW +SB 6/10 GW -SB 6/10 GW ~SB 6/10 GW EarthSB 6/10 GW Earth with circuit
SB 6/...WH Pre-printed as shownTypeSB 6/10 GS 1SB 6/10 GS 2SB 6/10 GS 3SB 6/10 GS 4SB 6/10 GS 5SB 6/10 GS 6SB 6/10 GS 7SB 6/10 GS 8SB 6/10 GS 9SB 6/10 GS 10SB 6/10 GS 11SB 6/10 GS 12SB 6/10 GS 13SB 6/10 GS 14SB 6/10 GS 15SB 6/10 GS 16SB 6/10 GS 17SB 6/10 GS 18SB 6/10 GS 19SB 6/10 GS 20SB 6/10 GS 21SB 6/10 GS 22SB 6/10 GS 23SB 6/10 GS 24SB 6/10 GS 25SB 6/10 GS 26SB 6/10 GS 27SB 6/10 GS 28SB 6/10 GS 29SB 6/10 GS 30SB 6/10 GS 31SB 6/10 GS 32SB 6/10 GS 33SB 6/10 GS 34SB 6/10 GS 35SB 6/10 GS 36SB 6/10 GS 37SB 6/10 GS 38SB 6/10 GS 39SB 6/10 GS 40SB 6/10 GS 41SB 6/10 GS 42SB 6/10 GS 43SB 6/10 GS 44SB 6/10 GS 45SB 6/10 GS 46SB 6/10 GS 47SB 6/10 GS 48SB 6/10 GS 49SB 6/10 GS 50SB 6/10 GS 51SB 6/10 GS 52SB 6/10 GS 53SB 6/10 GS 54SB 6/10 GS 55SB 6/10 GS 56SB 6/10 GS 57SB 6/10 GS 58SB 6/10 GS 59SB 6/10 GS 60SB 6/10 GS 61SB 6/10 GS 62SB 6/10 GS 63SB 6/10 GS 64SB 6/10 GS 65SB 6/10 GS 66SB 6/10 GS 67SB 6/10 GS 68SB 6/10 GS 69SB 6/10 GS 70SB 6/10 GS 71SB 6/10 GS 72SB 6/10 GS 73SB 6/10 GS 74SB 6/10 GS 75SB 6/10 GS 76SB 6/10 GS 77SB 6/10 GS 78
SB 6/...WH Pre-printed as shownTypeSB 6/10 GS 79SB 6/10 GS 80SB 6/10 GS 81SB 6/10 GS 82SB 6/10 GS 83SB 6/10 GS 84SB 6/10 GS 85SB 6/10 GS 86SB 6/10 GS 87SB 6/10 GS 88SB 6/10 GS 89SB 6/10 GS 90SB 6/10 GS 91SB 6/10 GS 92SB 6/10 GS 93SB 6/10 GS 94SB 6/10 GS 95SB 6/10 GS 96SB 6/10 GS 97SB 6/10 GS 98SB 6/10 GS 99SB 6/10 GS 100
SB 6/10 GS ASB 6/10 GS BSB 6/10 GS CSB 6/10 GS DSB 6/10 GS ESB 6/10 GS FSB 6/10 GS GSB 6/10 GS HSB 6/10 GS ISB 6/10 GS JSB 6/10 GS KSB 6/10 GS LSB 6/10 GS MSB 6/10 GS NSB 6/10 GS OSB 6/10 GS PSB 6/10 GS QSB 6/10 GS RSB 6/10 GS SSB 6/10 GS TSB 6/10 GS USB 6/10 GS VSB 6/10 GS WSB 6/10 GS XSB 6/10 GS YSB 6/10 GS ZSB 6/10 GS PESB 6/10 GS PENSB 6/10 GS MPSB 6/10 GS SLSB 6/10 GS T1SB 6/10 GS T2SB 6/10 GS T3SB 6/10 GS +SB 6/10 GS -SB 6/10 GS ~SB 6/10 GS EarthSB 6/10 GS Earth with circuit
Cat. no.2102.00632102.00642102.00652102.00662102.00672102.00682102.00692102.00702102.00712102.00722102.00732102.00742102.00752102.00762102.00772102.00782102.00792102.00802102.00812102.00822102.00832102.00842102.00852102.00862102.00872102.00882102.00892102.00902102.00912102.00922102.00932102.00942102.00952102.00962102.00972102.00982102.00992102.0100
2157.00012157.00022157.00032157.00042157.00052157.00062157.00072157.00082157.00092157.00102157.00112157.00122157.00132157.00142157.00152157.00162157.00172157.00182157.00192157.00202157.00212157.00222157.00232157.00242157.00252157.00262157.00272157.00282157.00292157.00302157.00312157.00322157.00332175.00012175.00022175.00032175.00042175.0005
Cat. no.2103.00012103.00022103.00032103.00042103.00052103.00062103.00072103.00082103.00092103.00102103.00112103.00122103.00132103.00142103.00152103.00162103.00172103.00182103.00192103.00202103.00212103.00222103.00232103.00242103.00252103.00262103.00272103.00282103.00292103.00302103.00312103.00322103.00332103.00342103.00352103.00362103.00372103.00382103.00392103.00402103.00412103.00422103.00432103.00442103.00452103.00462103.00472103.00482103.00492103.00502103.00512103.00522103.00532103.00542103.00552103.00562103.00572103.00582103.00592103.00602103.00612103.00622103.00632103.00642103.00652103.00662103.00672103.00682103.00692103.00702103.00712103.00722103.00732103.00742103.00752103.00762103.00772103.0078
Cat. no.2103.00792103.00802103.00812103.00822103.00832103.00842103.00852103.00862103.00872103.00882103.00892103.00902103.00912103.00922103.00932103.00942103.00952103.00962103.00972103.00982103.00992103.0100
2161.00012161.00022161.00032161.00042161.00052161.00062161.00072161.00082161.00092161.00102161.00112161.00122161.00132161.00142161.00152161.00162161.00172161.00182161.00192161.00202161.00212161.00222161.00232161.00242161.00252161.00262161.00272161.00282161.00292161.00302161.00312161.00322161.00332161.00342161.00352161.00362161.00372161.0038
351
SB 6 FS SB 6 GW SB 6 GS
MA
RK
ING
SYS
TEM
S
Terminal markers – Quick marking system SBCONTA-CONNECT
Quick marking system SB 8The SB 8 quick marking system is suitable forlabelling all CONTA-CLIP terminals that are widerthan 6 mm.
They are available in a variety of standard, prefabri-cated markers or with custom labelling.
The blank SB 8 markers are also available as MCSB 8/160 WH (3328.7 on p. 357). They can easi-ly be printed on using the EMS plotter system.
Material: polyamide 6.6 UL 94-V2, halogen-free Halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours availableCharacteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penPlotter
ApplicationTerminal width, mm
SB 8/8 WH2940.0SB 8/8 So WH2941.7
5 x 88-
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transferBS-1EMS
≥ 8
Qty.
240
240
SB 8/...WH Pre-printed as shownTypeSB 8/8 FW 1-8SB 8/8 FW 9-16SB 8/8 FW 17-24SB 8/8 FW 25-32SB 8/8 FW 33-40SB 8/8 FW 41-48SB 8/8 FW 49-56SB 8/8 FW 57-64SB 8/8 FW 65-72SB 8/8 FW 73-80SB 8/8 FW 81-88SB 8/8 FW 89-96SB 8/8 FW 97-104SB 8/8 FW 105-112SB 8/8 FW 113-120SB 8/8 FW X1; Y1; Z1SB 8/8 FW X2; Y2; Z2SB 8/8 FW X3; Y3; Z3SB 8/8 FW X4; Y4; Z4SB 8/8 FW X5; Y5; Z5SB 8/8 FW X6; Y6; Z6SB 8/8 FW X7; Y7; Z7SB 8/8 FW X8; Y8; Z8SB 8/8 FW X9; Y9; Z9SB 5/10 FW X10; Y10; Z10SB 8/8 FW R1; S1; T1SB 8/8 FW R2; S2; T2SB 8/8 FW R3; S3; T3SB 8/8 FW R4; S4; T4SB 8/8 FW R5; S5; T5SB 8/8 FW R6; S6; T6SB 8/8 FW R7; S7; T7SB 8/8 FW R8; S8; T8SB 8/8 FW R9; S9; T9SB 8/8 FW R10; S10; T10SB 8/8 FW U1; V1; W1SB 8/8 FW U2; V2; W2SB 8/8 FW U3; V3; W3SB 8/8 FW U4; V4; W4SB 8/8 FW U5; V5; W5SB 8/8 FW U6; V6; W6SB 8/8 FW U7; V7; W7SB 8/8 FW U8; V8; W8SB 8/8 FW U9; V9; W9SB 8/8 FW U10; V10; W10SB 8/8 FW U; V; W; N; PESB 8/8 FW R; S; T; N; Earth with circuitSB 8/8 FW L1; L2; L3; N; PESB 8/8 FW L1; L2; L3; N; Earth with circuit
SB 8/8 FS 1-8SB 8/8 FS 9-16SB 8/8 FS 17-24SB 8/8 FS 25-32SB 8/8 FS 33-40SB 8/8 FS 41-48SB 8/8 FS 49-56SB 8/8 FS 57-64SB 8/8 FS 65-72SB 8/8 FS 73-80SB 8/8 FS 81-88SB 8/8 FS 89-96SB 8/8 FS 97-104SB 8/8 FS 105-112SB 8/8 FS 113-120SB 8/8 FS X1; Y1; Z1SB 8/8 FS X2; Y2; Z2SB 8/8 FS X3; Y3; Z3SB 8/8 FS X4; Y4; Z4SB 8/8 FS X5; Y5; Z5SB 8/8 FS X6; Y6; Z6SB 8/8 FS X7; Y7; Z7SB 8/8 FS X8; Y8; Z8SB 8/8 FS X9; Y9; Z9SB 5/10 FS X10; Y10; Z10
Cat. no.9476.00019476.00029476.00039476.00049476.00059476.00069476.00079476.00089476.00099476.00109476.00119476.00129476.00139476.00149476.00159480.00019480.00029480.00039480.00049480.00059480.00069480.00079480.00089480.00099480.00109480.00119480.00129480.00139480.00149480.00159480.00169480.00179480.00189480.00199480.00209480.00219480.00229480.00239480.00249480.00259480.00269480.00279480.00289480.00299480.00309481.00019481.00029481.00039481.0004
9477.00019477.00029477.00039477.00049477.00059477.00069477.00079477.00089477.00099477.00109477.00119477.00129477.00139477.00149477.00159482.00019482.00029482.00039482.00049482.00059482.00069482.00079482.00089482.00099482.0010
SB 8/...WH Pre-printed as shownTypeSB 8/8 FS R1; S1; T1SB 8/8 FS R2; S2; T2SB 8/8 FS R3; S3; T3SB 8/8 FS R4; S4; T4SB 8/8 FS R5; S5; T5SB 8/8 FS R6; S6; T6SB 8/8 FS R7; S7; T7SB 8/8 FS R8; S8; T8SB 8/8 FS R9; S9; T9SB 8/8 FS R10; S10; T10SB 8/8 FS U1; V1; W1SB 8/8 FS U2; V2; W2 SB 8/8 FS U3; V3; W3SB 8/8 FS U4; V4; W4SB 8/8 FS U5; V5; W5SB 8/8 FS U6; V6; W6SB 8/8 FS U7; V7; W7SB 8/8 FS U8; V8; W8SB 8/8 FS U9; V9; W9SB 8/8 FS U10; V10; W10SB 8/8 FS U; V; W; N; PESB 8/8 FS R; S; T; N; Earth with circuitSB 8/8 FS L1; L2; L3; N; PESB 8/8 FW L1; L2; L3; N; Earth with circuit
SB 8/8 GW 0SB 8/8 GW 1SB 8/8 GW 2SB 8/8 GW 3SB 8/8 GW 4SB 8/8 GW 5SB 8/8 GW 6SB 8/8 GW 7SB 8/8 GW 8SB 8/8 GW 9SB 8/8 GW XSB 8/8 GW PESB 8/8 GW L1SB 8/8 GW L2SB 8/8 GW L3SB 8/8 GW NSB 8/8 GW +SB 8/8 GW -SB 8/8 GW ASB 8/8 GW BSB 8/8 GW CSB 8/8 GW DSB 8/8 GW ESB 8/8 GW FSB 8/8 GW GSB 8/8 GW HSB 8/8 GW ISB 8/8 GW JSB 8/8 GW KSB 8/8 GW LSB 8/8 GW MSB 8/8 GW NSB 8/8 GW OSB 8/8 GW PSB 8/8 GW QSB 8/8 GW RSB 8/8 GW SSB 8/8 GW TSB 8/8 GW USB 8/8 GW VSB 8/8 GW WSB 8/8 GW XSB 8/8 GW YSB 8/8 GW ZSB 8/8 GW PESB 8/8 GW PENSB 8/8 GW MPSB 8/8 GW SLSB 8/8 GW T1SB 8/8 GW T2SB 8/8 GW T3
Cat. no.9482.00119482.00129482.00139482.00149482.00159482.00169482.00179482.00189482.00199482.00209482.00219482.00229482.00239482.00249482.00259482.00269482.00279482.00289482.00299482.00309483.00019483.00029483.00039483.0004
9478.00009478.00019478.00029478.00039478.00049478.00059478.00069478.00079478.00089478.00099478.00109478.00119478.00129478.00139478.00149478.00159478.00169478.00179484.00019484.00029484.00039484.00049484.00059484.00069484.00079484.00089484.00099484.00109484.00119484.00129484.00139484.00149484.00159484.00169484.00179484.00189484.00199484.00209484.00219484.00229484.00239484.00249484.00259484.00269484.00279484.00289484.00299484.00309484.00319484.00329484.0033
Special print
352
.7
SB 8 FW SB 8 So WH
SB 8/...WH Pre-printed as shownTypeSB 8/8 GW +SB 8/8 GW -SB 8/8 GW ~SB 8/8 GW EarthSB 8/8 GW Earth with circuit
SB 8/8 GS 0SB 8/8 GS 1SB 8/8 GS 2SB 8/8 GS 3SB 8/8 GS 4SB 8/8 GS 5SB 8/8 GS 6SB 8/8 GS 7SB 8/8 GS 8SB 8/8 GS 9SB 8/8 GS XSB 8/8 GS PESB 8/8 GS L1SB 8/8 GS L2SB 8/8 GS L3SB 8/8 GS NSB 8/8 GS +SB 8/8 GS -SB 8/8 GS ASB 8/8 GS BSB 8/8 GS CSB 8/8 GS DSB 8/8 GS ESB 8/8 GS FSB 8/8 GS GSB 8/8 GS HSB 8/8 GS ISB 8/8 GS JSB 8/8 GS KSB 8/8 GS LSB 8/8 GS MSB 8/8 GS NSB 8/8 GS OSB 8/8 GS PSB 8/8 GS QSB 8/8 GS RSB 8/8 GS SSB 8/8 GS TSB 8/8 GS USB 8/8 GS VSB 8/8 GS WSB 8/8 GS XSB 8/8 GS YSB 8/8 GS ZSB 8/8 GS PESB 8/8 GS PENSB 8/8 GS MPSB 8/8 GS SLSB 8/8 GS T1SB 8/8 GS T2SB 8/8 GS T3SB 8/8 GS +SB 8/8 GS -SB 8/8 GS ~SB 8/8 GS EarthSB 8/8 GS Earth with circuit
Cat. no.9484.00349484.00359484.00369484.00379484.0038
9479.00009479.00019479.00029479.00039479.00049479.00059479.00069479.00079479.00089479.00099479.00109479.00119479.00129479.00139479.00149479.00159479.00169479.00179485.00019485.00029485.00039485.00049485.00059485.00069485.00079485.00089485.00099485.00109485.00119485.00129485.00139485.00149485.00159485.00169485.00179485.00189485.00199485.00209485.00219485.00229485.00239485.00249485.00259485.00269485.00279485.00289485.00299485.00309485.00319485.00329485.00339485.00349485.00359485.00369485.00379485.0038
353
SB 8 FS SB 8 GW SB 8 GS
MA
RK
ING
SYS
TEM
S
Terminal markers – Quick marking system AS 3/10CONTA-CONNECT
AS 3/10 Quick marking system AS 3/10The AS 3/10 are suitable for labelling all termi-nal blocks, end stops or marker holders widerthan 5 mm.
The compact shape and one-character inscrip-tion allow the printed standard tags to be puttogether in any combination. Two or four tags(depending on the terminal block or end stop)can be attached to a single terminal. The mark-ers can be attached to the SchT marker holderso that they are read vertically with from three totwelve characters.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.
Colours availableCharacteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPrinting processMarker penPlotterPlotter inlayNumber of characters | lines when using font size 16 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 16 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
AccessoriesMarker holder SchTCat. no.Marker holder SchTCat. no.Marker holder SchTCat. no.Marker holder SchTCat. no.Marker holder SchTCat. no.Marker holder SchTCat. no.Marker holder SchTCat. no.
AS 3/10 strips
AS 3/10 WH2571.0AS 3/10 WH2571.0
*
5 x 2,510-
PA6.6, halogen-free-40°C to +105°C
V2
Hot stamping processBS-1
----
≥ 5
SchT 3/AS 32616.0SchT 4/AS 32617.0SchT 5/AS 32618.0SchT 6/AS 32619.0SchT 4/82528.0SchT 6/122529.0SchT 122531.0
Qty.
500
AS 3/10...WH Pre-printed as shownTypeAS 3/10 G 0AS 3/10 G 1AS 3/10 G 2AS 3/10 G 3AS 3/10 G 4AS 3/10 G 5AS 3/10 G 6AS 3/10 G 7AS 3/10 G 8AS 3/10 G 9AS 3/10 G AAS 3/10 G BAS 3/10 G CAS 3/10 G DAS 3/10 G EAS 3/10 G FAS 3/10 G GAS 3/10 G HAS 3/10 G IAS 3/10 G JAS 3/10 G KAS 3/10 G LAS 3/10 G MAS 3/10 G NAS 3/10 G OAS 3/10 G PAS 3/10 G QAS 3/10 G RAS 3/10 G SAS 3/10 G TAS 3/10 G UAS 3/10 G VAS 3/10 G WAS 3/10 G XAS 3/10 G YAS 3/10 G ZAS 3/10 G +AS 3/10 G -AS 3/10 G ~AS 3/10 G Earth with circuit
Cat. no.2573.00002573.00012573.00022573.00032573.00042573.00052573.00062573.00072573.00082573.00092573.02002573.02012573.02022573.02032573.02042573.02052573.02062573.02072573.02082573.02092573.02102573.02112573.02122573.02132573.02142573.02152573.02162573.02172573.02182573.02192573.02202573.02212573.02222573.02232573.02242573.02252573.04192573.04202573.04082573.0407
Qty.
100
100
100
100
100
100
100
.9.8.1.3.5.7
* Standard inscription is only available with colour WH.354
355
MA
RK
ING
SYS
TEM
S
Terminal markers – Maxicard MC SB and MC BSTRMaxicard MC SB BSTRThe Maxicard SB and BSTR series are multi-functional mark-ing systems for marking CONTA-CLIP terminal blocks.The MC BSTR provides the ideal solution for longer strings ofcharacters. The MC BSTR 5/… MI variants are fitted with acentrally positioned foot that is used when the standard BSTRmarkers cover the cross-connection channel or wire entry.They are available blank or with custom printing. The blankMaxicards can easily be printed on using the EMS plotter sys-tem.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
Accessories
Additional accessories
CONTA-CONNECT
Qty.
1000
1000
356
MC SB 4
MC SB 4/200 WH4946.7MC SB 4/200 So WH3306.7
5 x 410
200
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 2 | 22 | 2
≥ 4,1
MC SB 5
MC SB 5/200 WH3300.7
MC SB 5/200 So WH3307.7
5 x 510
200
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 2 | 22 | 2
≥ 5,1
MC SB 6
MC MM 6x10/120 white3355.7MC SB 6/200 WH3301.7MC SB 6/200 So WH3308.7
5 x 610
200
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 3 | 23 | 3
≥ 6
Qty.
1000
1000
Qty.
1000
1000Special print
.9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5
356More accessories starting on page 264.
MC SB 7,5
MC SB 7,5/160 WH3326.7MC SB 7,5/160 So WH9327.7
5 x 7.58
160
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 4 | 23 | 3
≥ 7.5
MC SB 8
MC SB 8/160 WH3328.7MC SB 8/160 So WH3311.7
5 x 88
160
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 3 | 54 | 4
≥ 8
MC BSTR 5
MC BSTR 5/144 WH3309.7MC BSTR 5/144 So WH3312.7
10 x 512
144
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 3 | 56 | 2
≥ 5.1
MC BSTR 5
MC BSTR 5/144 MI WH3310.7MC BSTR 5/144 MI So WH3313.7
10 x 512
144
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 3 | 56 | 2
≥ 5.1
MC BSTR 5x12
MC BSTR 5x12/144 WH3380.7MC BSTR 5x12/144 So WH3379.7
12 x 512
144
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 3 | 57 | 2
≥ 5.1
Qty.
800
800
Qty.
800
800
Qty.
720
720
Qty.
720
720
Qty.
720
720
.9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5
357
MA
RK
ING
SYS
TEM
S
Terminal markers – Maxicard MC BSTRMaxicard MC BSTR The SB and BSTR Maxicard series are multi-functionalmarking systems suitable for all CONTA-CLIP terminalblocks. The MC BSTR provides the ideal solution forlonger strings of characters.They are available in a blank white version or with cus-tomer-specific labelling. The blank Maxicards can easilybe printed on using the EMS plotter system.
Material: Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationTerminal width, mm
Accessories
Additional accessories
CONTA-CONNECT
Qty.
600
600
Qty.
420
420
Qty.
200
200Special print
MC BSTR 6
MC BSTR 6/120 WH 3314.7MC BSTR 6/120 So WH 3315.7
12 x 610
120
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 4 | 59 | 3
> 6
MC BSTR 8x12
MC BSTR 8x12/84 WH 9406.7MC BSTR 8x12/84 So WH9407.7
12 x 87
84
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 6 | 59 | 4
> 8
MC BSTR 10x12
MC MM 6x10/120 white3355.7MC BSTR 10x12/40 WH 9408.7MC BSTR 10x12/40 So WH9409.7
12 x 105
40
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 8 | 59 | 5
> 10
358More accessories starting on page 264.
.9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5
359
MA
RK
ING
SYS
TEM
S
Selection list of terminal markers for other manufacturersCONTA-CONNECT
MarkersTerminal markers for Phoenix Contact
MC MM 5x10
x
xmmmxxxxxxxxxsxxsxsssxxx
xxxxx
xs
xxxxxxmx
xx
xssmx
x
xxx
xxxxsxxxsxx
x
x
xxxxxx
xxxxxxm
xxssx
x
MC MM 6x5
xxxx
xxxxxxxx
xx
xxxxxxxx
x
x
xx
xxxxxxx
x
xx
xxxx
xxx
xxxx
xxx
x
x
xxxx
xxxxx
xx
xx
xxx
MC MM 6x10
x
xxmmmxxxxxxxxx
xx
x
xxxxxxxxxsx
ssss
xxxxxxmx
xxxx
mxsxxxxxxxxxx
ssx
xxsxsxsxxxxxxsxxxxxxm
xx
xsx
MC MM 8x5
x
xxxxxxxx
x
xxxx
xx
xxxxxxx
x
xx
x
x
xxx
xxxx
x
x
xxx
xxxxx
x
xx
x
x
MC MM 5x5
xxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxxxxxx
xx
xxxxxxxxx
xxxxxxxx
xxxxxxxxx
xxx
MC MM 5x10
xxxxsx
xxxxm
xxxm
xxxxxxxxm
xxmx
m
x
xxxxxxx
x
xmxx
xxxxxxxxx
x
MC MM 6x5
xxxx
xxxx
xxxxx
xxx
xxxxxxxxx
x
xx
xx
xx
x
xx
xxx
xxxx
xx
xxxxxx
x
MC MM 6x10
xxxx
xsxx
xxxxs
xxx
mxxxxxxxx
m
xx
xm
mx
xx
xxxs
x
x
xxm
xxxxxx
MC MM 8x5
xxxx
x
xx
xxx
xxxxxxxx
xx
x
x
xx
xxx
xx
xxxx
MarkersScrew terminals
AKG 16/35AKG 4DFK 4...DFK 5...DIK (D) 1,5DLK 2,5DOK (D) 1,5GTF 76HDFK 10HDFK 16HDFK 25HDFK 4HDFK 50HDFK 95HV M.../1HV M.../2MBK 3/E-ZMBK 5/E-ZMBK 6/EMBKKB 2,5MT 1,5MTK-LOEMTK-P/PMTK T/POTTA 2,5OTTA 25OTTA 6PIK 4-...PIK 6-...RT (0) 3...RT (0) 4...RT (0) 8...SLKK 5TMC...TMCP SOCKET...UDK 3UDK4UDK 4-MTKUDK 5-MTKUDMTK 5...UGSK 6UGSK/SUHK 4...UHV 150UHV 240UHV 25UHV 95UIK 16UIKN 16UIK 35UK 1,5 NUK 10 NUK 10.3-HESIUK 10-DRHESIUK 16 NUK 2,5 NUK 3 NUK 4...UK 35UK 5 NUK 5-HESIUK 5-MTKUK 6 NUK 6,3-HESIUK 6-FSI/CUKB 4...UKH 150UKH 240UKH 50UKH 95UKK 3UKK 4 UKK 5...UKKB 10UKKB 10/2,5UKN 10 NUKN 16 NUKN 2,5UKN 35UKN 5UKN 6 NUK - SIURDK 6URKNURKN/SURTK 6URTK/SURTKD/SPURTK/SSURTK/SPUSED 16USED 27USEN 14USEN 18USIGUSK 4USLKG 1,5 NUSLKG 10 NUSLKG 16 NUSLKG 2,5 NUSLKG 3USLKG 35USLKG 5USLKG 50
Screw terminals
USLKG 6 NUSLKG 95UT 10...UT 16...UT 2.5...UT 35UT 4UT 6UTME (D) 6...UTTB 2,5...UTTB 4...UVKB 4...VBSN 4VBST 4VIOK 1,5
Tension-spring terminalsMZB 1,5...MZDB 1,5...MZFK 1,5MZFKK 1,5MZFKKB 1,5SC 2,5SP 2,5SRTK 6...SGSK 6...SRDK 6...ST 2,5...ST 4...ST 4-HESIST 4-FSIST 6...ST 10...ST 16...ST 35...STI 10...STI 16STI 2,5...STI 4...STIOSTN 10STN 16STN 2,5STN 35STN 4STS 2,5STS 4STS 6...STTB 1.5...STTB 2,5...STTB 4...STTBS 2,5...STTBS 4...STTBU 4...STU 2,5...STU 4...STU 10...STU 35...TT-STTB-...ZDIK 1,5...ZDMTK 2,5ZFK-6-DRHESIZFKK 2,5...ZGSK 4ZPV 1,5/2,5SRDK...ZRTK 4ZRV 8
Pressure-springterminalsDT 2,5...DTI 2,5...DTN 2,5...DTI 4...DTN 4...DTI 6...DTN 6...DTME(D) 6...DT 6/2,5-DRHESI
Quick-connect terminalsQTC...1,5...QTTC...1,5...QTC...2,5
s = can be assembled as side marker m = can be assembled as middle marker
MC MM 5x5
xxxx
xxxxxxxxxxxx
xxx
xxxxxxxxxx
x
xx
xxxxxxx
x
xxxxxxxx
xxx
xxxxxxxx
x
x
xxxx
xxxxx
xx
xxxxxxx
360
Markers
MC MM 5x10
xxxxxxxxxxxxx
xx
xxxxxx
xxxxxxx
MC MM 5x10
x
MC MM 6x10
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxx
xxxxxxxxxxxxxxxxxxxxx
MC MM 6x10
x
xxxxx
Terminal markers for Wago
Feed-through terminals
280-101/104280-601/602280-603/633/634280-604/621/826/626280-641/651/654280-646/656/946280-653/671/672280-681/684/650280-830...835280-901...906280-989...995280-996...999280-691281-101/104281-601/604281-631/651281-652...654281-663/664/668281-678/681/684281-901/902/904281-992...994/998/691282-101/104282-601/604282-681/682/684/687282-901/902/904/907282-992/993/691283-101/104283-601/604/607283-671/672/674/677283-901/902/904/907283-992/998/691284-101/104284-601/604/607284-621/624284-681/682/684/687284-691/992/993284-901/902/904/907285-194/195285-601/604/607285-634/635285-691285-992/995290-861/864/867780-992/993781-992/993782-992783-992784-992785-601/604/607/613812-140880-661/662/664880-681/682/684880-831/832/834880-901/902/904880-961/964/962
Protective earth terminals
280-107280-607280-637280-677280-687280-837280-907281-107281-607281-637281-657281-687281-907282-107282-607282-687282-907283-107283-607283-609283-677283-907284-107284-607284-687284-907285-197285-607
Terminal blocksD 4/6HD 6/9M 10/16M 10/22M 16/12M 35/16
Terminal markers for Entrelec
Protective earth terminals
285-637780-607780-637781-607782-607783-607784-607880-687880-837880-907
Fused terminals
282-698282-696281-611/612/616/622281-624/672281-613/623282-122282-120282-126282-124282-128Double-level terminals
280-513280-517280-519/529280-520/530280-521/525280-522/526280-523/533280-524/534280-527/537280-531280-532280-543281-619/629281-620/630Three- and four-level terminals280-549/551280-550280-552280-547/557/597280-548/558281-531-532281-530780-601/602/604780-631/651/654781-601/604781-631/651782-601/604784-601/604783-601/604Routing-potential terminals727-...280-675
Honeycomb elements726-...
Pluggable relay and base788-...
Installation terminals775-641775-642/649775-646775-645777-641777-642777-646777-645777-648777-647777-649777-651777-650777-652776-641776-645/646776-649/642776-650/651
Terminal blocksM 4/7...M 4/9...M 70/22...M 95/26...MA 2,5/5...MB 10/13...
MC MM 5x10
xx
xxx
xxxxxxxxxxxx
xxxxx
xx
x
x
x
xxxx
MC MM 5x10
x
MC MM 6x10
x
xxxx
xxxxxxxxxx
xx
xx
xxxxx
x
x
xxxxxxxxxxxxxx
MC MM 6x10
xxxx
x
MarkersMC MM
5x10xxxxxxxxxx
x
xxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
xxxxxxxxxxxxx
MC MM 5x10
MC MM 6x10
xxxxxxxxxxxxxx
xxxx
xxxxxxxx
MC MM 6x10
xxxxxx
Markers
Rated-disconnect terminals
280-612/614280-622/623/627280-649/676/685/695280-683280-805/836/829/839280-868/870/876/879280-869/871/880280-874/881/883/885280-875/882/884280-912...914281-659/660281-666281-683281-912282-131282-133282-135282-138...141282-694/699282-811/821282-860282-865282-866/282/695/697282-870781-613/623781-643/653782-613/623783-613/623784-613/623Initiator terminals
280-553/560280-559280-561280-563280-567280-570280-571280-573280-574280-577280-580280-582280-584280-587280-588Actuator terminals
280-515280-554280-555280-556280-562280-565280-566280-568280-572280-575280-576280-578280-583280-585280-586280-592280-593Diode-LED terminals
280-613280-623280-624280-655280-658280-673280-809280-815280-915280-940280-941280-942280-943281-603281-633281-634281-635281-636281-665281-673281-915
Terminal blocksMB 10/14,5...MB10/24...MB 25/30...MB 4/6...MS 4/6...MTC 6...
Markers Markers Markers
361
MA
RK
ING
SYS
TEM
S
Terminal markers – Maxicard MC MMMaxicard MC MM for labelling all .........The Maxicard MM multi-markers can be used to label termi-nals from other manufacturers.
MC MM fit on terminals from Phoenix Contact, Wago andEntrelec.
They are available blank or with custom printing. The blankPocket-Maxicards can easily be printed on using the EMS plot-ter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationTerminal width, mmTerminal manufacturerAccessories
Additional accessories
CONTA-CONNECT
Qty.
600
600
MC MM 5 x 10
MC MM 5x10/120 WH3355.7MC MM 5x10/120 So WH 3357.7
5 x 1010
120
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-12|36|2
> 5Phoenix, Wago, Entrelec
Qty.
1000
1000
MC MM 5 x 5
MC MM 5x5/200 WH9400.7*
MC MM 5x5/200 So WH 9401.7*
5 x 510
200
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-12|22|2
> 5Phoenix
Qty.
600
600
MC MM 6 x 10
MC MM 6x10/120 WH3355.7MC MM 6x10/120 WH 3356.7MC MM 6x10/120 So WH 3358.7
6 x 1010
120
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-13|36|2
> 6Phoenix, Wago, Entrelec
.7 .7 .7
Special print
362More accessories starting on page 264. *Available starting in the first quarter of 2011.
MC MM 6 x 5
MC MM 6x5/200 WH9402.7*
MC MM 6x5/200 So WH 9403.7*
6 x 510
200
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-13|23|2
> 6Phoenix
MC MM 8 x 5
MC MM 8x5/160 WH9404.7*
MC MM 8x5/160 So WH9405.7*
8 x 58
160
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-15|23|3
> 8Phoenix
Qty.
1000
1000
Qty.
800
800
363*Available starting in the first quarter of 2011.
MA
RK
ING
SYS
TEM
S
.7 .7
Selection list of cable and wire markersSelection based on cable diameter
CONTA-CONNECT
Outer diameter ofinsulation
Ferrules for marker and cable labelling
mm0.20.40.60.81
1.21.41.61.82
2.22.42.62.83
3.23.43.63.84
4.24.44.64.85
5.25.45.65.86
6.26.46.66.87
7.27.47.67.88
8.28.48.68.89
9.29.49.69.810
10.210.410.610.811
11.211.411.611.812
12.212.412.612.813
13.213.413.613.814
14.214.414.614.815
15.215.415.615.816
16.216.416.616.817
17.217.417.617.818
Inches0.0080.0160.0240.0310.0390.0470.0550.0630.0710.0790.0870.0940.1020.1100.1180.1260.1340.1420.1500.1570.1650.1730.1810.1890.1970.2040.2120.2200.2280.2360.2440.2520.2600.2680.2760.2840.2920.3000.3080.3150.3230.3310.3390.3470.3550.3630.3710.3790.3870.3940.4020.4100.4180.4260.4340.4420.4500.4580.4660.4730.4810.4890.4970.5050.5130.5210.5290.5370.5450.5520.5600.5680.5760.5840.5910.5990.6070.6150.6230.6300.6380.6460.6560.6610.6690.6770.6850.6930.7010.709
KB
H 3
/...
KB
H 5
/...
KB
H 1
0/.
..
KB
H 1
6/.
..
KH
02
/...
KH
10
/...
KH
20
/...
KH
30
/...
KH
Z 0
2/.
..
KH
Z 1
0/.
..
KH
Z 2
0/.
..
KH
Z 3
0/.
..
KH
E 0
,5/.
..
KH
E 2
,5/.
..
KH
E 4
,0/.
..
KH
E 1
0,0
/...
KH
E 2
5,0
/...
KH
E 7
0,0
/...
KB
H-C
10
KB
H-C
20
KB
H-C
30
KB
H-S
...
KM
S...
KSH
6/3
3
KSH
11/
33
KSH
4/3
0
MP
S...
Marker is attached with cable tie
Catalogue page
1.3
3
374
MC
KMC
0/4.
..
2.5
5
375
8
16
377
1.3
3
370
2.5
5
370
8
16
371
1.3
3
371
2.5
5
371
8
16
371
0.3
2.2
372
2
3.7
372
3.5
4.3
372
4
6.3
371
9
15
373
2.4
3
381
3
4
381
4
5
381
16
>18
?36390
7
>18
384
7
>18
382
12
>18
382
7
>18
382
16
>18
392
4
10
376
2,5
10
370
2.5
10
371
6
10
373
364
0.6
2.6
366
Selection based on wire cross-section
Wire cross-sectionFerrules for marker and cable labelling
mm2
0.10.250.50.75
11.251.5
---
2.5-----4-------6---------
10----------
16--------
25---------
35------
50---
70----
95----
120
AWG2724201816-
14---
12-----
10-------8--
------6----------4--------3---------2------
1/0---
2/0----
4/0----
5/0
KB
H 3
/...
MC
KMC
0/4.
..
KB
H 5
/...
KB
H 1
0/.
..
KB
H 1
6/.
..
KH
02
/...
KH
10
/...
KH
20
/...
KH
30
/...
KH
Z 0
2/.
..
KH
Z 1
0/.
..
KH
Z 2
0/.
..
KH
Z 3
0/.
..
KH
E 0
,5/.
..
KH
E 2
,5/.
..
KH
E 4
,0/.
..
KH
E 1
0,0
/...
KH
E 2
5,0
/...
KH
E 7
0,0
/...
KB
H-C
10
KB
H-C
20
KB
H-C
30
KB
H-S
...
KM
S...
KSH
6/3
3
KSH
11/
33
KSH
4/3
0
MP
S...
Marker is attached with cable tie
Catalogue page
0.10.5
372
0.5
2.5
372
2.5
4
372
4
10
371
10
25
373
25
70
373
0.4
1.5
381
1,5
3
381
3
4
381
70
>120
390
16
>120
384
16
>120
382
50
>120
382
16
>120
382
70
>120
392
0.2
1.5
374
1.5
4
375
2.5
16
376
16
70
377
0.25
1.5
370
1,5
4
3700
2,5
16
370
16
70
371
0.25
1.5
371
1,5
4
371
2.5
16
371
16
70
371
365
MA
RK
ING
SYS
TEM
S
0.14
1.0
366
Wire and cable markers – Maxicard MC KMCMaxicard MC KMCThe KMC Maxicard provides a clear, quick and simple solution formarking a wire. The MC KMC can be attached to a wire that hasalready been connected. The plastic halves snap together to hold themarker captive on the wire. Perfect for use with wire cross-sections from 0.14-1.0 mm2 or 0.9-2.6 mm2. Three different lengths are available.They are available blank or with custom printing.The blank Maxicards can easily be printed using the EMS plotter sys-tem.
Material: Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width of labelling field, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
Additional accessories
CONTA-CONNECT
Qty.
200
200
366
MC KMC 0/4x12
MC KMC 0/4x12/40 WH9810.7*
MC KMC 0/4x12/40 So WH9811.7*
5 x 412 x 4.1
540
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 8 | 12 | 5
0.14 - 1.00.9 - 2.6
MC KMC 0/4x21
MC KMC 0/4x21/40 WH9812.7*
MC KMC 0/4x21/40 So WH9813.7*
21 x 4.15
40
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 15 | 12 | 5
0.14 - 1.00.9 - 2.6
MC KMC 0/4x30
MC MM 6x10/120 white3355.7MC KMC 0/4x30/30 WH9814.7*
MC KMC 0/4x30/30 So WH9815.7*
30 x 4.15
30
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-1 22 | 12 | 5
0.14 - 1.00.9 - 2.6
Special print
.0.9.8.7.5 .0.9.8.7.5 .0.9.8.7.5
366
Qty.
200
200
Qty.
150
150
More accessories starting on page 264.
367
MA
RK
ING
SYS
TEM
S
Wire and cable markers – Maxicard MC ESS and MC GSMaxicard MC ESSfThe Maxicard ESS provides a clear, quick and simple solu-tion for marking a wire. The MC ESS single markers arepushed into custom-designed KH, KHZ, KH E or KSH cable-marker sleeves.
• When used together, the MCESS and the cable markersleeves ensure that your labels are protected from environ-mental influences.
• Can be used for marking wires up to 70 mm2.Available in five different lengths. They are available blank or with custom printing.The blank Pocket-Maxicards can easily be printed on usingthe EMS plotter system.
Material: Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
Application
AccessoriesCable marker sleeves KHCat. no.Cable marker sleeves KHCat. no.Cable marker sleeves KHCat. no.Cable marker sleeves KHCat. no.Cable marker sleeves KHZCat. no.Cable marker sleeves KHZCat. no.Cable marker sleeves KHZCat. no.Cable marker sleeves KHZCat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KH ECat. no.Cable marker sleeves KSHCat. no.
Qty.
320
320
Qty.
400
400
Qty.
320
320
Qty.
200
200
100
50
200
200
100
50
2000
1000
1000
500
500
250
Qty.
200
200
100
50
200
200
100
50
2000
1000
1000
500
500
250
Qty.
200
200
100
50
200
200
100
50
1000
1000
1000
500
500
250
100
Page
370
370
370
371
371
371
371
371
372
372
372
373
373
373
Page
370
370
370
371
371
371
371
371
372
372
372
373
373
373
Page
370
370
370
371
371
371
371
371
372
372
372
373
373
373
382
CONTA-CONNECT
Additional accessories
MC ESS 12/64
MC ESS 12/64 WH3316.7MC ESS 12/64 So WH 3364.7
12x48
64
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-18|12|5
KH 02/124900.0KH 10/124904.0KH 20/124908.0KH 30/124912.0KHZ 02/125984.0KHZ 10/125988.0KHZ 20/125992.0KHZ 30/125996.0KH E 0.5/129360.0KH E 2.5/129365.0KH E 4.0/129370.0KH E 10.0/129375.0KH E 25,0/129380.0KH 70.0/129385.0
MC ESS 15/80
MC ESS 15/80 WH3317.7MC ESS 15/80 So WH 3365.7
15x41080
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-111|23|5
KH 02/154901.0KH 10/154905.0KH 20/154909.0KH 30/154913.0KHZ 02/155985.0KHZ 10/155989.0KHZ 20/155993.0KHZ 30/155997.0KH E 0.5/159361.0KH E 2.5/159366.0KH E 4.0/159371.0KH E 10.0/159376.0KH E 25,0/159381.0KH 70.0/159386.0
MC ESS 18/64
MC ESS 18/64 WH3318.7MC ESS 18/64 So WH3366.7
18x48
64
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-113|23|5
KH 02/184902.0KH 10/184906.0KH 20/184910.0KH 30/184914.0KHZ 02/185986.0KHZ 10/185990.0KHZ 20/185994.0KHZ 30/185998.0KH E 0.5/189362.0KH E 2.5/189367.0KH E 4.0/189372.0KH E 10.0/189377.0KH E 25,0/189382.0KH 70.0/189387.0KSH 6/332383.0
Special print
368More accessories starting on page 264.
.9.8.7.1.3.5 .9.8.7.1.3.5 .9.8.7.1.3.5
Qty.
400
400
Qty.
300
300
Qty.
200
200
100
50
200
200
100
50
1000
1000
1000
500
500
250
Page
370
370
370
371
371
371
371
371
372
372
372
373
373
373
Page
370
370
370
371
372
372
372
373
373
373
382
Page
382
Qty.
200
200
100
50
2000
1000
1000
500
500
250
500
MC ESS 20/80
MC ESS 20/80 WH3319.7MC ESS 20/80 So WH3367.7
20x41080
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-115|23|5
KH 02/214903.0KH 10/214907.0KH 20/214911.0KH 30/214915.0KHZ 02/215987.0KHZ 10/215991.0KHZ 20/215995.0KHZ 30/215999.0KH E 0.5/219363.0KH E 2.5/219368.0KH E 4.0/219373.0KH E 10.0/219378.0KH E 25,0/219383.0KH 70.0/219388.0
MC ESS 30/60
MC ESS 30/60 WH3354.7MC ESS 30/60 So WH 3359.7
30x41060
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-122|12|5
KH 02/309390.0KH 10/309391.0KH 20/309392.0KH 30/309393.0
KH E 0.5/309364.0KH E 2.5/309369.0KH E 4.0/309374.0KH E 10.0/309379.0KH E 25,0/309384.0KH 70.0/309389.0KSH 4/303896.0
MC GS 7/20
MC GS 7/20 R WH3329.7MC GS 7/20 So WH 3335.7
20x75
40
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-114|45|5
KSH 11/332384.0
Qty.
200
200
Qty.
100
369
MA
RK
ING
SYS
TEM
S
.9.8.7.1.3.5 .9.8.7.1.3.5 .0.8.7
Wire and cable markers – Cable marker sleeves KH/KHZCable marker sleeve KH and KHZThe KH and KHZ cable marker sleeves, used in combina-tion with the ESS Maxicard, enable cables to be labelledquickly and conveniently.• The ferrule is easier to attach to the wire because of the
special bellows shape of the cable marker sleeve.• When used together, the MCESS and the KH and KHZ
cable marker sleeves ensure that your labels are protect-ed from environmental influences.
• Oval-shaped pocket makes the labels easy to insertbefore or after installation.
• The elastic pocket both protects and secures the marker.• Can be used for marking wires up to 70 mm2. • Available in five different lengths and four wire diame-
ters. Material: KH Soft PVC, no cadmium or siliconeMaterial: KHZ Soft PVC, no cadmium, halogen or silicone
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength KH../12|KH../15|KH../18|KH../21|KH../30 x Width x Height (mm)
MaterialMaterial
Temperature rangeFlamm. class acc. to UL 94ResistanceInscriptionCan be marked with
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
Additional accessories
Qty.
200
200
200
200
200
KH 02
KH 02/124900.0KH 02/154901.0KH 02/184902.0KH 02/214903.0KH 02/309390.0
Transparent
12|15|18|21|30 x 5 x 5
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
0.25 - 1.51.3 - 3.0
KH 10
KH 10/124904.0KH 10/154905.0KH 10/184906.0KH 10/214907.0KH 10/309391.0
Transparent
12|15|18|21|30 x 5 x 7
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
1.5 - 4.02.5 - 5.0
KH 20
MC KMS 14/23 WH3304.7KH 20/124908.0KH 20/154909.0KH 20/184910.0KH 20/214911.0KH 20/309392.0
Transparent
12|15|18|21|30 x 6 x 10
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
2.5 - 16.04.0 - 10.0
CONTA-CONNECT
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Qty.
200
200
200
200
200
Qty.
100
100
100
100
100
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
370More accessories starting on page 264.
KH 30
KH 30/124912.0KH 30/154913.0KH 30/184914.0KH 30/214915.0KH 30/309393.0
Transparent
12|15|18|21|30 x 6 x 10
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
16.0 - 70.08.0 - 16.0
KHZ 02
KHZ 02/125984.0KHZ 02/155985.0KHZ 02/185986.0KHZ 02/215987.0
Yellow / transparent
12|15|18|21 x 5 x 5
Soft PVC, with no halogen, cadmium or silicone
-30°C to +90°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
0.25 - 1.51.3 - 3.0
KHZ 10
KHZ 10/125988.0KHZ 10/155989.0KHZ 10/185990.0KHZ 10/215991.0
Yellow / transparent
12|15|18|21 x 5 x 7
Soft PVC, with no halogen, cadmium or silicone
-30°C to +90°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
1.5 - 4.02.5 - 5.0
KH 20
KHZ 20/125992.0KHZ 20/155993.0KHZ 20/185994.0KHZ 20/215995.0
Yellow / transparent
12|15|18|21 x 6 x 10
Soft PVC, with no halogen, cadmium or silicone
-30°C to +90°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
2.5 - 16.04.0 - 10.0
KHZ 30
KHZ 30/125996.0KHZ 30/155997.0KHZ 30/185998.0KHZ 30/215999.0
Yellow / transparent
12|15|18|21 x 6 x 10
Soft PVC, with no halogen, cadmium or silicone
-30°C to +90°CV0
Oils, benzene, gamma and UV radiation
MC ESS series
16.0 - 70.08.0 - 16.0
Qty.
50
50
50
50
50
Qty.
200
200
200
200
Qty.
200
200
200
200
Qty.
100
100
100
100
Qty.
50
50
50
50
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
371
MA
RK
ING
SYS
TEM
S
Halogen-free!
Wire and cable markers – Cable marker sleeves KH ECable marker sleeve KH EThe KH E cable marker sleeves, used in combination withthe ESS Maxicard, enable cables to be labelled quicklyand conveniently. • The ferrule is easier to attach to the wire because of the
special bellows shape of the cable marker sleeve. • When used together, the MCESS and the KH E cable
marker sleeves ensure that your labels are protectedfrom environmental influences.
• Oval-shaped pocket makes the labels easy to insertbefore or after installation.
• The elastic pocket both protects and secures the marker.• Can be used for marking wires up to 70 mm2.
Available in five different lengths and six wire diameters. Manyincluded in one package for cost-effective marking.
Material: PVC
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength KH E../12|KH E../15|KH E../18|KH E../21|KH E../30
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionCan be marked with
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
Additional accessories
Qty.
2000
2000
1000
1000
2000
KH E 0,5
KH E 0.5/129360.0KH E 0.5/159361.0KH E 0.5/189362.0KH E 0.5/219363.0KH E 0.5/309364.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and
various cleaning agents
MC ESS series
0.1 - 0.50.3 - 2.2
KH E 2,5
KH E 2.5/129365.0KH E 2.5/159366.0KH E 2.5/189367.0KH E 2.5/219368.0KH E 2.5/309369.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and
various cleaning agents
MC ESS series
0.5 - 2.5 2.0 - 3.7
KH E 4,0
MC KMS 14/23 WH3304.7KH E 4.0/129370.0KH E 4.0/159371.0KH E 4.0/189372.0KH E 4.0/219373.0KH E 4.0/309374.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and
various cleaning agents
MC ESS series
2.5 - 4.0 3.5 - 4.3
CONTA-CONNECT
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Qty.
1000
1000
1000
1000
1000
Qty.
1000
1000
500
500
1000
372More accessories starting on page 264.
KH E 10
KH E 10.0/129375.0KH E 10.0/159376.0KH E 10.0/189377.0KH E 10.0/219378.0KH E 10.0/309379.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and var-
ious cleaning agents
MC ESS series
4.0 - 10. 0 4.3 - 6.3
KH E 25
KH E 25.0/129380.0KH E 25.0/159381.0KH E 25.0/189382.0KH E 25.0/219383.0KH E 25.0/309384.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and var-
ious cleaning agents
MC ESS series
10.0 - 25.06.0 - 10.0
KH E 70
KH E 70,0/129385.0KH E 70,0/159386.0KH E 10.0/189387.0KH E 70,0/219388.0KH E 70,0/309389.0
Transparent
12|15|18|21|30
PVC, halogen-free-40°C to +90°C
V0Alkaline substances, alcohol, and var-
ious cleaning agents
MC ESS series
25.0 - 70.09.0 - 15.0
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Appropriatemarkers
MC ESS 12Page 368
MC ESS 15Page 368
MC ESS 18Page 368
MC ESS 20Page 369
MC ESS 30Page 369
Qty.
500
500
500
500
500
Qty.
500
500
500
500
500
Qty.
250
250
250
250
250
373
MA
RK
ING
SYS
TEM
S
Wire and terminal markers – Cable marker sleeves KBH
*1: red ferrules*2: blue ferrules
CONTA-CONNECT
Qty.
200
1000
Qty.
1
KBH 3
KBH 3/3yellowInscription
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
KBH 3/3Colour offerruleblackbrownredorangeyellowgreenbluevioletgreywhite
KBH 3/6Colour offerruleL1L2L3MP*2
PEX1X2 X3 A1A2
Cat. no.Bag with200 pcs2630.00002630.00012630.00022630.00032630.00042630.00052630.00062630.00072630.00082630.0009
2630.02002630.02012630.02022630.02032630.02042630.02052630.02062630.02072630.02082630.02092630.02102630.02112630.02122630.02132630.02142630.02152630.02162630.02172630.02182630.02192630.02202630.02212630.02222630.02232630.02242630.0225Cat. no.Bag with200 pcs2631.01002631.01012631.01022631.01032631.01042631.01052631.01062631.01072631.01082631.0109Cat. no.Bag with200 pcs2678.04092678.04102678.04112678.04122678.04132678.04142678.04152678.04162678.04172678.0418
KBH 3/3yellowInscription
+-/.:=
~+-abcdefghijklmnopqrstuvwxyz
KBH 3/3Ferrule colour
Inscription
black/0brown/1red/2orange/3yellow/4green/5blue/6magenta/7grey/8white/9
KBH 3
KBH 3/3yellowInscription
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
KBH 3/3Colour offerruleblackbrownredorangeyellowgreenbluevioletgreywhite
KBH 3/6Colour offerruleL1L2L3MP*2
PEX1X2 X3 A1A2
Cat. no.Roll with1000 pcs2156.00002156.00012156.00022156.00032156.00042156.00052156.00062156.00072156.00082156.0009
2156.02002156.02012156.02022156.02032156.02042156.02052156.02062156.02072156.02082156.02092156.02102156.02112156.02122156.02132156.02142156.02152156.02162156.02172156.02182156.02192156.02202156.02212156.02222156.02232156.02242156.0225Cat. no.Roll with1000 pcs2142.01002142.01012142.01022142.01032142.01042142.01052142.01062142.01072142.01082142.0109Cat. no.Roll with1000 pcs2675.04092675.04102675.04112675.04122675.04132675.04142675.04152675.04162675.04172675.0418
KBH 3/3yellowInscription
+-/.:=
~+-abcdefghijklmnopqrstuvwxyz
Cat. no.Roll with1000 pcs2156.04192156.04202156.04022156.04032156.04042156.04052156.04062156.04072156.04082156.04002156.04012156.03002156.03012156.03022156.03032156.03042156.03052156.03062156.03072156.03082156.03092156.03102156.03112156.03122156.03132156.03142156.03152156.03162156.03172156.03182156.03192156.03202156.03212156.03222156.03232156.03242156.0325
Cat. no.Bag with200 pcs2630.04192630.04202630.04022630.04032630.04042630.04052630.04062630.04072630.04082630.04002630.04012630.03002630.03012630.03022630.03032630.03042630.03052630.03062630.03072630.03082630.03092630.03102630.03112630.03122630.03132630.03142630.03152630.03162630.03172630.03182630.03192630.03202630.03212630.03222630.03232630.03242630.0325Cat. no.Bag with200 pcs2597.00002597.00012597.00022597.00032597.00042597.00052597.00062597.00072597.00082597.0009
374More accessories starting on page 264.
Wire marking KBH 3/3 | KH 3/6KBH cable marker sleeves pro-vide a safe, quick and simplemarking solution.
Safe and adjustable, for uncon-nected cables. Perfect for use withwire cross-sections of 0.2 to 1.5 mm2. Available in 3 mm and 6mm lengths. Easy to read withhigh-contrast typeface. Torsionresistant for reliable marking com-binations. Resistant to environ-mental influences. Material: Soft PVC, with no cad-mium or silicone. Halogen-freemarkers (KBHZ) are availableon request.
TypeType/Colour bagCat. no.Type/Colour rollCat. no.
Colours available
Characteristics
DimensionsLength KBH 3/3 | KBH 3/6 (mm)
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
AccessoriesInstallation toolCat. no.
KBH 3/3 blank YE2631.0104KBH 3/3 blank YE2142.0104
3 | 6
Soft PVC, no cadmium or silicone,
Dimensionally stable between -30 °C and +60 °C
V0Oils, benzene, gamma and UV radiation
Hot stampedBS-1
0.2 - 1.51.3 - 3
MD 32650.0
*1
*2*1
*2
Installation tool MD
Wire and terminal markers – Cable marker sleeves KBH
Qty.
200
1000
Qty.
1
1
KBH 5
KBH 5/3yellowInscription
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
KBH 5/3yellowInscriptionblackbrownredorangeyellowgreenbluevioletgreywhite
KBH 5/6Colour offerruleL1L2L3MP*2
PEX1X2 X3 A1A2
Cat. no.Bag with200 pcs2632.00002632.00012632.00022632.00032632.00042632.00052632.00062632.00072632.00082632.0009
2632.02002632.02012632.02022632.02032632.02042632.02052632.02062632.02072632.02082632.02092632.02102632.02112632.02122632.02132632.02142632.02152632.02162632.02172632.02182632.02192632.02202632.02212632.02222632.02232632.02242632.0225Cat. no.Bag with200 pcs2633.01002633.01012633.01022633.01032633.01042633.01052633.01062633.01072633.01082633.0109Cat. no.Roll with200 pcs2681.04092681.04102681.04112681.04122681.04132681.04142681.04152681.04162681.04172681.0418
KBH 5/3yellowInscription
+-/.:=
~+-abcdefghijklmnopqrstuvwxyz
KBH 5/3Ferrule colour
Inscription
black/0brown/1red/2orange/3yellow/4green/5blue/6magenta/7grey/8white/9
KBH 5
KBH 5/3yellowInscription
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
KBH 5/3Colour offerruleblackbrownredorangeyellowgreenbluevioletgreywhite
KBH 5/6Colour offerruleL1L2L3MP*2
PEX1X2 X3 A1A2
Cat. no.Roll with1000 pcs2160.00002160.00012160.00022160.00032160.00042160.00052160.00062160.00072160.00082160.0009
2160.02002160.02012160.02022160.02032160.02042160.02052160.02062160.02072160.02082160.02092160.02102160.02112160.02122160.02132160.02142160.02152160.02162160.02172160.02182160.02192160.02202160.02212160.02222160.02232160.02242160.0225Cat. no.Roll with1000 pcs2146.01002146.01012146.01022146.01032146.01042146.01052146.01062146.01072146.01082146.0109Cat. no.Roll with1000 pcs2634.04092634.04102634.04112634.04122634.04132634.04142634.04152634.04162634.04172634.0418
KBH 5/3yellowInscription
+-/.:=
~+-abcdefghijklmnopqrstuvwxyz
Cat. no.Roll with1000 pcs2160.04192160.04202160.04022160.04032160.04042160.04052160.04062160.04072160.04082160.04002160.04012160.03002160.03012160.03022160.03032160.03042160.03052160.03062160.03072160.03082160.03092160.03102160.03112160.03122160.03132160.03142160.03152160.03162160.03172160.03182160.03192160.03202160.03212160.03222160.03232160.03242160.0325
Cat. no.Bag with200 pcs2632.04192632.04202632.04022632.04032632.04042632.04052632.04062632.04072632.04082632.04002632.04012632.03002632.03012632.03022632.03032632.03042632.03052632.03062632.03072632.03082632.03092632.03102632.03112632.03122632.03132632.03142632.03152632.03162632.03172632.03182632.03192632.03202632.03212632.03222632.03232632.03242632.0325Cat. no.Bag of2002596.00002596.00012596.00022596.00032596.00042596.00052596.00062596.00072596.00082596.0009
375
Wire marking KBH 5/3 | KH 5/6KBH cable marker sleeves pro-vide a safe, quick and simplemarking solution. Safe andadjustable, for unconnectedcables. Perfect for use with wirecross-sections of 1.5 mm2 to4 mm2. Available in 3 mm and6 mm lengths. Easy to read withhigh-contrast typeface. Torsionresistant for reliable markingcombinations. Resistant to envi-ronmental influences.Material: Soft PVC, with no cad-mium or silicone. Halogen-freemarkers (KBHZ) are availableon request.
TypeType/Colour bagCat. no.Type/Colour rollCat. no.
Colours available
Characteristics
DimensionsLength KBH 5/3 | KBH 5/6 (mm)
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
AccessoriesInstallation toolCat. no. Installation toolCat. no.
KBH 3/3 blank YE2633.0104KBH 3/3 blank YE2146.0104
3 | 6
Soft PVC, no cadmium or silicone,
Dimensionally stable between -30 °C and +60 °C
V0Oils, benzene, gamma and UV radiation
Hot stampedBS-1
1,5 - 42,5 - 5
MD 42651.0MD 52652.0
375
*1
*2*1
*2
*1: red ferrules*2: blue ferrules
More accessories starting on page 264.
Installation tool MD
Wire and terminal markers – Cable marker sleeves KBH
*1: red ferrules*2: blue ferrules
CONTA-CONNECT
Qty.
100
250
KBH 10
KBH 10/4YellowInscription
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
KBH 10/4Colour offerruleblack
brown
red
orange
yellow
green
blue
violet
grey
white
Cat. no.Bag with100 pcs2637.00002637.00012637.00022637.00032637.00042637.00052637.00062637.00072637.00082637.0009
2637.02002637.02012637.02022637.02032637.02042637.02052637.02062637.02072637.02082637.02092637.02102637.02112637.02122637.02132637.02142637.02152637.02162637.02172637.02182637.02192637.02202637.02212637.02222637.02232637.02242637.0225
Cat. no.Bag with100 pcs2638.01002638.01012638.01022638.01032638.01042638.01052638.01062638.01072638.01082638.0109
KBH 10/4YellowInscription
+
-
/
.
:
=
~
+
-
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
KBH 10/4Ferrule colourInscriptionblack/0
brown/1
red/2
orange/3
yellow/4
green/5
blue/6
magenta/7
grey/8
white/9
KBH 10
KBH 10/4yellowInscription
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
KBH 10/4Colour offerruleblack
brown
red
orange
yellow
green
blue
violet
grey
white
Cat. no.Roll à 2502162.00002162.00012162.00022162.00032162.00042162.00052162.00062162.00072162.00082162.0009
2162.02002162.02012162.02022162.02032162.02042162.02052162.02062162.02072162.02082162.02092162.02102162.02112162.02122162.02132162.02142162.02152162.02162162.02172162.02182162.02192162.02202162.02212162.02222162.02232162.02242162.0225
Cat. no.Roll with250 pcs2148.01002148.01012148.01022148.01032148.01042148.01052148.01062148.01072148.01082148.0109
KBH 10/4yellowInscription
+
-
/
.
:
=
~
+
-
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
KBH 10/6FerrulecolourL1
L2
L3MP*2
PE
X1
X2
X3
A1
A2
Cat. no.Rollat 250 pcs2162.04192162.04202162.04022162.04032162.04042162.04052162.04062162.04072162.04082162.04002162.0401
2162.03002162.03012162.03022162.03032162.03042162.03052162.03062162.03072162.03082162.03092162.03102162.03112162.03122162.03132162.03142162.03152162.03162162.03172162.03182162.03192162.03202162.03212162.03222162.03232162.03242162.0325
Cat. no.Roll with125 pcs2695.04092695.04102695.04112695.04122695.04132695.04142695.04152695.04162695.04172695.0418
Cat. no.Bag with100 pcs2637.04192637.04202637.04022637.04032637.04042637.04052637.04062637.04072637.04082637.04002637.0401
2637.03002637.03012637.03022637.03032637.03042637.03052637.03062637.03072637.03082637.03092637.03102637.03112637.03122637.03132637.03142637.03152637.03162637.03172637.03182637.03192637.03202637.03212637.03222637.03232637.03242637.0325
Cat. no.Bag with100 pcs2589.00002589.00012589.00022589.00032589.00042589.00052589.00062589.00072589.00082589.0009
376More accessories starting on page 264.
Wire marking KBH 10/4 | KBH 10/6KBH cable marker sleeves pro-vide a safe, quick and simplemarking solution. Safe andadjustable, for unconnectedcables. Perfect for use with wirecross-sections of 2,5 to 16 mm2.Available in 4 mm and 6 mmlengths. Easy to read with high-contrast typeface. Torsion resist-ant for reliable marking combi-nations. Resistant to environ-mental influences.Material: Soft PVC, with no cad-mium or silicone. Halogen-freemarkers (KBHZ) are available onrequest.
TypeType/Colour bagCat. no.Type/Colour rollCat. no.
Colours available
Characteristics
DimensionsLength KBH 10/4 | KBH 10/6 (mm)
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
KBH 10/4 blank YE2638.0104KBH 10/4 blank YE2148.0104
4 | 6
Soft PVC, no cadmium or silicone,
Dimensionally stable between -30 °C and +60 °C
V0Oils, benzene, gamma and UV radiation
Hot stampedBS-1
2.5 - 164 - 10
*1
*2*1
*2
Wire and terminal markers – Cable marker sleeves KBH
*1: red ferrules*2: blue ferrules
Qty.
20
KBH 16
KBH 16/6yellowInscription
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
KBH 16/6Colour offerruleblack
brown
red
orange
yellow
green
blue
violet
grey
white
Cat. no.Bag with20 pcs2639.00002639.00012639.00022639.00032639.00042639.00052639.00062639.00072639.00082639.0009
2639.02002639.02012639.02022639.02032639.02042639.02052639.02062639.02072639.02082639.02092639.02102639.02112639.02122639.02132639.02142639.02152639.02162639.02172639.02182639.02192639.02202639.02212639.02222639.02232639.02242639.0225
Cat. no.Bag with20 pcs2640.01002640.01012640.01022640.01032640.01042640.01052640.01062640.01072640.01082640.0109
KBH 16/6yellowInscription
+
-
/
.
:
=
~
+
-
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
Cat. no.Bag with20 pcs2639.04192639.04202639.04022639.04032639.04042639.04052639.04062639.04072639.04082639.04002639.0401
2637.03002637.03012637.03022637.03032637.03042637.03052637.03062637.03072637.03082637.03092637.03102637.03112637.03122637.03132637.03142637.03152637.03162637.03172637.03182637.03192637.03202637.03212637.03222637.03232637.03242637.0325
377More accessories starting on page 264.
Wire marking KBH 16/6KBH cable marker sleeves pro-vide a safe, quick and simplemarking solution. Safe andadjustable, for unconnectedcables. Perfect for use with wirecross-sections of 16 to 70 mm2.Easy to read with high-contrasttypeface. Torsion resistant forreliable marking combinations.Resistant to environmental influ-ences. Material: Soft PVC, with no cad-mium or silicone. Halogen-freemarkers (KBHZ) are availableon request.
TypeType/Colour bagCat. no.
Colours available
Characteristics
DimensionsLength KBH 16, mm
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationWire cross-section, mm2
Outer diameter of insulation in mm
KBH 16/6 blank YE2640.0104
6
Soft PVC, no cadmium or silicone,
Dimensionally stable between -30 °C and +60 °C
V0Oils, benzene, gamma and UV radiation
Hot stampedBS-1
16 - 708 - 16
377
*1
*2
CONTA-CONNECT
378
Cable marker sleeve KBHKBH cable marker sleeves provide a safe, quick and sim-ple marking solution. Safe and adjustable, for unconnect-ed cables.
Perfect for use with wire cross-sections of 2.5 to 16 mm2. • Available in lengths of 15 mm, 21 mm, 27 mm and
36 mm. • Easy to read with high-contrast typeface. • Torsion resistant for reliable marking combinations.
Resistant to environmental influences.Material: Soft PVC, with no cadmium or silicone.
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mmNumber of ferrules per stripNumber of strips per pack
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPlotterPlotter inlayMarker pen
ApplicationCross-section, mm 2
Outer diameter of insulation, mm
AccessoriesInstallation toolCat. no.
Additional accessories
KBH 3/15 strip
KBH 3/15 blank YE strip2627.0KBH 3/15 blank WH strip2628.0
151284
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-17BS-1
0.2-1.51.3-3
MD 32650.0
Qty.
1008
1008
Page
-
Qty.
1
.8 .7
KBH 3/21 strip
KBH 3/21 blank YE strip2661.0KBH 3/21 blank WH strip2662.0
219
112
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-17BS-1
0.2-1.51.3-3
MD 32650.0
Qty.
1008
1008
Page
-
Qty.
1
.8 .7
KBH 3/27 strip
KBH 3/27 blank YE strip2629.0KBH 3/27 blank WH strip2663.0
277
143
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-17BS-1
0.2-1.51.3-3
MD 32650.0
Qty.
1001
1001
Page
-
Qty.
1
.8 .7
Wire and terminal markers – Cable marker sleeves KBH
Plotter printing possible!
379
KBH 5/15 strip
KBH 5/15 blank YE strip2664.0KBH 5/15 blank WH strip2665.0
151284
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-18BS-1
1,5-42,5-5
MD 42651.0MD 52652.0
Qty.
1008
1008
Page
-
-
Qty.
1
1
.7
MA
RK
ING
SYS
TEM
S
.8
KBH 5/21 strip
KBH 5/21 blank YE strip2673.0KBH 5/21 blank WH strip2674.0
219
112
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-18BS-1
1,5-42,5-5
MD 42651.0MD 52652.0
Qty.
1008
1008
Page
-
-
Qty.
1
1
.7.8
KBH 5/27 strip
KBH 5/27 blank YE strip2684.0KBH 5/27 blank WH strip2685.0
277
130
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-18BS-1
1,5-42,5-5
MD 42651.0MD 52652.0
Qty.
910
910
Page
-
-
Qty.
1
1
.7
KBH 10/15-Single
KBH 10/15 blank YE single2590.0KBH 10/15 blank WH single2656.0
15--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-1
2,5-164-10
Qty.
100
100
Page Qty.
.7
KBH 10/21-Single
KBH 10/21 blank YE single2592.0KBH 10/21 blank WH single2657.0
21--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-1
2,5-164-10
Qty.
100
100
Page Qty.
.7.8 .8 .8
Plotter printing possible!
CONTA-CONNECT
380
Cable marker sleeve KBHKBH cable marker sleeves provide a safe, quick and sim-ple marking solution. Safe and adjustable, for unconnect-ed cables. Perfect for use with wire cross-sections of 2.5 to16 mm2. Available in lengths of 15 mm, 21 mm, 27 mmand 36 mm. Easy to read with high-contrast typeface. Tor-sion resistant for reliable marking combinations. Resistantto environmental influences.
Material: Soft PVC, with no cadmium or silicone.
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mmNumber of ferrules per stripNumber of strips per pack
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPlotterPlotter inlayMarker pen
ApplicationCross-section, mm 2
Outer diameter of insulation, mm
AccessoriesInstallation toolCat. no.
Additional accessories
KBH 10/27-Single
KBH 10/27 blank YE single2593.0KBH 10/27 blank WH single3435.0
27--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-1
2.5-164-10
Qty.
100
100
Page Qty.
.8 .7
Qty.
100
100
Page Qty.
.8 .7
Wire and terminal markers – Cable marker sleeves KBHKBH 10/36-Single
KBH 10/36 blank YE single2594.0KBH 10/36 blank WH single2659.0
36--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-1
2.5-164-10
Plotter printing possible!
381
MA
RK
ING
SYS
TEM
S
Wire and cable markers – Cable marker sleeves KBH
*1: red ferrules*2: blue ferrules
Cable marker sleeve KBH-CKBH-C wire markers provide a safe, quick and simple solutionfor marking wires that are already connected.
Rapid snap-on attachment.Perfect for use with wire cross-sections of 0.4 – 4 mm2. Torsionresistant for reliable marking combinations. Very low spacerequirements. Material: hard PVC, with no cadmium or sili-cone.
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mm
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationCross-section*, mm 2
Outer diameter of insulation*, mm*KBH-C 10|20|30Accessories
Additional accessories
Qty.
Qty.Page
.8
*1
3
Hard PVC, cadmium-free and silicone-free
-30°C to +60°C
V0Oils, benzene, gamma and UV radiation
Hot stamped–
0,4-1,5 | 1,5-3 | 3-42,4-3 | 3-4 | 4-5
KBH-C
KBH-C 10yellowInscription
0
1
2
3
4
5
6
7
8
9
+
-
/
.
:
=
~
+
-
KBH-C 20yellowInscription
0
1
2
3
4
5
6
7
8
9
+
-
/
.
:
=
~
+
-
Cat. no.Bagà 2002591.00002591.00012591.00022591.00032591.00042591.00052591.00062591.00072591.00082591.00092591.04192591.04202591.04022591.04032591.04042591.04052591.04062591.04072591.04082591.04002591.0401
Cat. no.Bagwith 2002595.00002595.00012595.00022595.00032595.00042595.00052595.00062595.00072595.00082595.00092595.04192595.04202595.04022595.04032595.04042595.04052595.04062595.04072595.04082595.04002595.0401
KBH-C
KBH-C 30yellowInscription
0
1
2
3
4
5
6
7
8
9
+
-
/
.
:
=
~
+
-
Cat. no.Bagà 2002599.00002599.00012599.00022599.00032599.00042599.00052599.00062599.00072599.00082599.00092599.04192599.04202599.04022599.04032599.04042599.04052599.04062599.04072599.04082599.04002599.0401
*1
*2
*1
*2
*1
*2
Wire and cable markers – Cable marker sleeves KSH Cable marker sleeve KSHThe KSH cable marker sleeves, used in combination withthe ESS Maxicard and GS markers, enable cables to belabelled quickly and conveniently.The KSH is simply attached to the cable using cable ties.This makes them particularly suitable for cables with largecross-sections. When used together, the Maxicard and theKSH cable marker sleeves ensure that your labels are pro-tected from environmental influences.
Available in three different sizes.
Material: Soft PVC, no cadmium or silicone
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width x height, mmPocket width, mmWing width, mmMaterialMaterial
Temperature rangeFlamm. class acc. to UL 94ResistanceInscription
ApplicationMax. number of cable ties per ferruleMax. cable tie width, mm
AccessoriesKB cable tiesCat. no.Maxicard MCCat. no.
Qty.
100
KSH 11/33
KSH 11/332384.0
transparent
11 x 33 x 2.211-
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
23.6
KB 140 BK2672.0MC GS 7/20 WH3329.7
KSH 6/33
KSH 6/332383.0
transparent
6 x 33 x 1.56-
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
23.6
KB 140 BK2672.0MC ESS 18/64 WH3318.7
CONTA-CONNECT
Appropriatemarkers
MC GS 7/20Page 396
Appropriatemarkers
MC ESS 18Page 368
Appropriatemarkers
MC ESS 30Page 369
Qty.
100
Qty.
100
Page
390
396
Qty.
1000
320
Qty.
1000
300
Qty.
1000
200
Page
390
368
Page
390
369
KSH 4/30
KSH 4/303896.0
transparent
5.2 x 30 x 44.214.4
Soft PVC, no cadmium orsilicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
15.4
KB 140 BK2672.0MC ESS 30/60 WH3354.7
382
383
MA
RK
ING
SYS
TEM
S
Wire and cable markers – Maxicard MC KMSMaxicard MC KMSThe KMS Maxicard provides a clear, quick and simple solu-tion for marking a cable. The MC KMS is attached to the cableusing one or more cable ties.
• Perfect for use with wire cross-sections of 16 mm2.• Available in four different sizes.
They are available blank or with custom printing. The blankPocket-Maxicards can easily be printed on using the EMS plot-ter system.
Material: Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType / colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per rowNumber of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationWire cross-section, mm2
Max. number of cable ties per tagMax cable tie width, mmAccessoriesKB cable tiesCat. no.
Qty.
160
160
MC KMS 10/23
MC KMS 10/23 WH3303.7MC KMS 10/23 So WH 3361.7
10x234
32
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-118|23|5
> 161
3.6
KB 140 BK2672.0
Qty.
60
60
MC KMS 11 /60
MC KMS 11/60 WH3305.7MC MM 11/60 So WH3363.7
11x60112
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-132|58|5
> 162
4.7
KB 140 BK2672.0
MC KMS 14 /23
MC KMS 14/23 WH3304.7MC KMS 14/23 So WH 3362.7
14x234
32
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-118|46|5
> 163
3.6
KB 140 BK2672.0
Qty.
160
160
Qty.
1000
Qty.
1000
Qty.
1000
Page
390
Page
390
Page
390
.9.8.7.5 .9.8.7.5 .9.8.7.5
CONTA-CONNECT
Special print
384
Qty.
160
160
Qty.
1000
Page
390
MC KMS 15 /24
MC KMS 15/24 WH3302.7MC KMS 15/24 So WH 3360.7
15x244
32
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-118|46|5
> 161
3.6
KB 140 BK2672.0
385
MA
RK
ING
SYS
TEM
S
.9.8.7.5
Wire and cable markers – Cable tie KB | Cable marker KKMCable tie KB | Cable marker KKMKB and KKM cable markers provide you with a way tolabel your cables quickly and simply.KB:The cable ties come with an integrated cable marker. TheBS-1 marker pen can be used for labelling as can the GKElabels which can be printed on with a thermal-transferprinter.Available in two lengths.Material: Transparent nylon 6.6, halogen-free and silicone-freeKKM: The KKM cable markers are mainly used indoors. They areattached to the cable using cable ties. They can be labelledwith GKE labels or MC GST Maxicards.They are available in two sizes. Material:Polypropylene/nylon 6.6, transparent, halogen-free and silicone-free.
TypeType/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmLength x width of label field
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
Inscription optionsMarker penLabelsMaxicard
ApplicationMax. insulation diameter, mmMax. number of cable ties Max. cable tie width, mmAccessoriesLabels GKE YECat. no. Labels GKE silverCat. no. Labels GKE WHCat. no. Labels GKE YECat. no. Labels GKE WHCat. no. Maxicard MCCat. no. Marker penCat. no. KB cable tiesCat. no.
Additional accessories
CONTA-CONNECT
Qty.
100
Qty.1 roll of 10000
pieces1 roll of 10000
pieces1 roll of 10000
pieces10 sheets at264 pieces
10 sheets at264 pieces
1
Page
404
404
404
405
405
413
Qty.
100
Qty.1 roll of 10000
pieces1 roll of 10000
pieces1 roll of 10000
pieces10 sheets at264 pieces
10 sheets at264 pieces
1
Qty.
100
Qty.1 roll of 10000
pieces1 roll of 10000
pieces1 roll of 10000
pieces10 sheets at
156 pieces10 sheets at
156 pieces
1
KB 100
KB 100 BF 25x83189.0
Transparent
100 x 2.58 x 25
Nylon 6.6, no halogen or silicone
-40°C to +85°C
BS-1GKE
-
24--
GKE 20/8 YE3903.8GKE 20/8 SI3903.0GKE 20/8 WH3903.7GKE 20/8 A4 GE 3922.8GKE 20/8 A4 WH3922.7
BS-12034.0
KB 200
KB 200 BF 25x83190.0
Transparent
200 x 2.58 x 25
Nylon 6.6, no halogen or silicone
-40°C to +85°C
BS-1GKE
-
52--
GKE 20/8 YE3903.8GKE 20/8 SI3903.0GKE 20/8 WH3903.7GKE 20/8 A4 GE3922.8GKE 20/8 A4 WH3922.7
BS-12034.0
KB 200
KB 200 BF 28.5 x 133191.0
Transparent
200 x 4.628.5 x 13
Nylon 6.6, no halogen or silicone
-40°C to +85°C
BS-1GKE
-
46--
GKE 25/12 YE3904.8GKE 25/12 SI3904.0GKE 25/12 WH3904.7GKE 26/10 A4 GE3924.8GKE 26/10 A4 WH3924.7
BS-12034.0
386More accessories starting on page 264.
Page
404
404
404
405
405
413
Page
404
404
404
405
405
413
KKM 34 x 10
KKM 34x103192.0
transparent
34 x 1031 x 7
Polypropylene, no halogen or silicone
-40°C to +105°C
-GKE
MC GST
-1
8.5
GKE 30/6 WH3917.7
MC GST 27/8 R3340.7
KB 140 BK2672.0
KKM 45 x 20
KKM 45x203193.0
transparent
45 x 2040 x 19
Polypropylene, no halogen or silicone
-40°C to +105°C
-GKE
-
-1
8.5
GKE 38/19 YE3909.8GKE 38/19 SI3909.0GKE 3819/ WH3909.7
KB 140 BK2672.0
Qty.
100
Qty.
100
Page
404
399
390
Qty.
1 roll of 10000pieces
80
1000
Qty.1 roll of 2000
pieces1 roll of 2000
pieces1 roll of 2000
pieces
1000
Page
404
404
404
390
387
MA
RK
ING
SYS
TEM
S
CONTA-CONNECT
388
Cable marker sleeve KBH-SKBH-S cable marker sleeves provide a safe, quick and simplesolution for marking a wire.The KBH-S cable marker sleeves can be printed on using theEMS plotter system.
Perfect for use with wire cross-sections of 70 mm 2 and larger.They can be quickly attached using KH holders and cableties or just with cable ties for stamped ferrules.• They are available in 21, 25, 36, 40, 57 and 84 mm lengths.• Easy to read with high-contrast typeface. • Torsion resistant and captive.
Resistant to environmental influences. Material: Soft PVC, no cadmium or silicone
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mmNumber of ferrules per stripNumber of strips per pack
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPlotterPlotter inlayMarker penNumber of characters| rows, font size 16, plotter pen 0.25: horizontal
Number of characters| rows, font size 16, plotter pen 0.25: vertical
ApplicationCross-section, mm 2
Outer diameter of insulation, mm
AccessoriesHolder KHCat. no. Holder KHCat. no. KB cable tiesCat. no.
Additional accessories
KBH-S 21 – Strip
KBH-S 21 blank YE strip2624.0KBH-S 21 blank WH strip2525.0
219
50
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-15BS-112 | 35 | 6
>70>16
KH 70 BK2654.0KH 110 BK2655.0KB 140 BK2672.0
Qty.
450
450
Page
390
390
390
Qty.
100
100
1000
.8
KBH-S 36 – Strip
KBH-S 36 blank YE strip2532.0KBH-S 36 blank WH strip2533.0
365
50
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-15BS-121 | 35 | 6
>70>16
KH 70 BK2654.0KH 110 BK2655.0KB 140 BK2672.0
Qty.
250
250
Qty.
100
100
1000
KBH-S 57 – Strip
KBH-S 57 blank YE strip2625.0KBH-S 57 blank WH strip2626.0
573
50
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-15BS-1
32 | 35 | 6
>70>16
KH 70 BK2654.0KH 110 BK2655.0KB 140 BK2672.0
Qty.
150
150
Qty.
100
100
1000
.7 .8 .7 .8 .7
Wire and terminal markers – Cable marker sleeves KBH-S
More accessories starting on page 264.
Page
390
390
390
Page
390
390
390
Plotter printing possible!
Holder KH
Wire and terminal markers – Cable marker sleeves KBH-S/KBSCable marker sleeve KBH-SKBH-S cable marker sleeves provide a safe, quick andsimple solution for marking a wire.The KBH-S cable marker sleeves can be printed on usingthe EMS plotter system.
Perfect for use with wire cross-sections of 70 mm2 andlarger. They can be quickly attached using KH holdersand cable ties or just with cable ties for KBS stamped fer-rules.• They are available in 21, 25, 36, 40, 57 and 84 mm
lengths.• Easy to read with high-contrast typeface. • Torsion resistant and captive.
Resistant to environmental influences. Material: Soft PVC, no cadmium or silicone
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mmNumber of ferrules per stripNumber of strips per pack
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPlotterPlotter inlayMarker penNumber of characters| rows, font size 16, plotter pen 0.25: horizontal
Number of characters| rows, font size 16, plotter pen 0.25: vertical
ApplicationCross-section, mm 2
Outer diameter of insulation, mm
AccessoriesHolder KHCat. no. Holder KHCat. no. KB cable tiesCat. no.
Qty.
100
100
Qty.
100
100
1000
.8
KBS-25 – Single
KBS-25 blank YE Single2669.0104KBS-25 blank WH Single2669.0109
25--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-114 | 35 | 6
>70 >16
KB 140 BK2672.0
Qty.
100
100
Page
390
3
Qty.
1000
KBS-40 – Single
KBS-40 blank YE Single2670.0104KBS-40 blank WH Single2670.0109
40--
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-19BS-124 | 35 | 6
>70 >16
KB 140 BK2672.0
Qty.
100
100
Page
390
Qty.
1000
.7 .8 .7 .8 .7
389
MA
RK
ING
SYS
TEM
S
Page
390
390
390
Holder KH
KBH-S 84 – Strip
KBH-S 84 blank YE strip2562.0KBH-S 84 blank WH strip2565.0
842
50
Soft PVC, no cadmium or silicone
-30°C to +60°CV0
Oils, benzene, gamma and UV radiation
EMSCCI-15BS-1
48 | 35 | 6
>70 >16
KH 70 BK2654.0KH 110 BK2655.0KB 140 BK2672.0
Plotter printing possible!
Wire and cable markers – Cable marker sleeves KBH-S
*1: red ferrules*2: blue ferrules
Cable marker sleeve KBH-S
KBH-S cable marker sleeves provide asafe, quick and simple solution formarking wires.Perfect for use with wire cross-sectionsof 70 mm2 and larger. Quick attach-ment with KH holders and cable ties. • Unlimited combination possibilities. • Easy to read with high-contrast type-
face. • Torsion resistant and captive. • Resistant to environmental influences.
Material: Soft PVC, with no cadmium orsilicone. Halogen-free markers (KBHZ-S) are avail-able on request.
TypeType/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength, mm
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94Resistance
InscriptionPrinting processMarker pen
ApplicationCross-section, mm 2
Outer diameter of insulation, mm
AccessoriesHolder KHCat. no. Holder KHCat. no. KB cable tiesCat. no.
Additional accessories
CONTA-CONNECT
Qty.
100
500
Qty.
100
100
1000
.8
KBH-S4 blank YE2691.0104KBH-S4 blank YE2671.0104
*1
4
Soft PVC, cadmium-free and silicone-free
Dimensionally stable between -30 °C and +60 °C
V0
Oils, benzene, gamma and UV radiation
Hot stampedBS-1
>70>16
KH 70 BK2654.0KH 110 BK2655.0KB 140 BK2672.0
KBH-S4
KBH-S4yellowInscription
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
KBH-S4Colour offerruleblack
brown
red
orange
yellow
green
blue
violet
grey
white
Cat. no.Bag à 1002690.00002690.00012690.00022690.00032690.00042690.00052690.00062690.00072690.00082690.0009
2690.02002690.02012690.02022690.02032690.02042690.02052690.02062690.02072690.02082690.02092690.02102690.02112690.02122690.02132690.02142690.02152690.02162690.02172690.02182690.02192690.02202690.02212690.02222690.02232690.02242690.0225
Cat. no.Bag à 1002691.01002691.01012691.01022691.01032691.01042691.01052691.01062691.01072691.01082691.0109
KBH-S4yellowInscription
+
-
/
.
:
=
~
+*1
-*2
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
KBH-S4Ferrule colour
Inscription
black/0
brown/1
red/2
orange/3
yellow/4
green/5
blue/6
magenta/7
grey/8
white/9
KBH-S4
KBH-S4yellowInscription
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
KBH-S4Colour offerruleblack
brown
red
orange
yellow
green
blue
violet
grey
white
Cat. no.Rollà 5002666.00002666.00012666.00022666.00032666.00042666.00052666.00062666.00072666.00082666.0009
2666.02002666.02012666.02022666.02032666.02042666.02052666.02062666.02072666.02082666.02092666.02102666.02112666.02122666.02132666.02142666.02152666.02162666.02172666.02182666.02192666.02202666.02212666.02222666.02232666.02242666.0225
Cat. no.Roll à 5002671.01002671.01012671.01022671.01032671.01042671.01052671.01062671.01072671.01082671.0109
KBH-S4yellowInscription
+
-
/
.
:
=
~
+*1
-*2
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
KBH-S4Ferrule colour
Inscription
Roll
Cat. no.Rollà 5002666.04192666.04202666.04022666.04032666.04042666.04052666.04062666.04072666.04082666.04002666.0401
2666.03002666.03012666.03022666.03032666.03042666.03052666.03062666.03072666.03082666.03092666.03102666.03112666.03122666.03132666.03142666.03152666.03162666.03172666.03182666.03192666.03202666.03212666.03222666.03232666.03242666.0325
Cat. no.Roll à 100
Bag
Cat. no.Bagà 1002690.04192690.04202690.04022690.04032690.04042690.04052690.04062690.04072690.04082690.04002690.0401
2690.03002690.03012690.03022690.03032690.03042690.03052690.03062690.03072690.03082690.03092690.03102690.03112690.03122690.03132690.03142690.03152690.03162690.03172690.03182690.03192690.03202690.03212690.03222690.03232690.03242690.0325
Cat. no.Bag à 1002527.00002527.00012527.00022527.00032527.00042527.00052527.00062527.00072527.00082527.0009
390More accessories starting on page 264.
391
MA
RK
ING
SYS
TEM
S
Wire and cable markers – Stainless steel marking system MPS Stainless steel markers MPSThe MPS marking system provides a high-quality methodfor marking cables, wires, pipes and components that isquick, safe and simple.
Single and multi-character marking – with high-qualityembossingSingle-character marker: 0-9, A-Z, Ä; Ü; Ö, special charac-ters and symbols • Very good resistance in saline and damp environments • Good corrosion resistance against acids • First-class quality controlled
Material: Acid-resistant, stainless steel
TypeType/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Characteristics
DimensionsLength x width, mm
MaterialMaterial
Temperature rangeResistance
InscriptionSystem
ApplicationMax. number of cable ties per holderMax. cable tie width, mm
AccessoriesHolder MPS HCat. no. Holder MPS HCat. no. Holder MPS HCat. no. Holder MPS HCat. no. Holder MPS HCat. no. Cable tie CTSCat. no. Cable tie CTSCat. no. Cable tie CTSCat. no. Cable tie CTSCat. no. Cable tie toolCat. no.
Additional accessories
MPS blank2653.0229MPS Assortment box*1
2686.0MPS assortment box*2
2687.0
5,5 x 10,9
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemical and fire
Embossing
24.6
MPS H 473430.0MPS H 653431.0MPS H 873432.0MPSH 1093433.0MPS H 1283434.0CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
Qty.
50
1
1
Page
393
393
393
393
393
393
393
393
393
425
Qty.
50
50
50
50
50
100
100
100
100
1
Qty.50505050505050505050
5050505050505050505050505050505050505050505050505050505050
505050505050505050505050
Cat. no.2653.00002653.00012653.00022653.00032653.00042653.00052653.00062653.00072653.00082653.0009
2653.02002653.02012653.02022653.02032653.02042653.02052653.02062653.02072653.02082653.02092653.02102653.02112653.02122653.02132653.02142653.02152653.02162653.02172653.02182653.02192653.02202653.02212653.02222653.02232653.02242653.02252653.02262653.02272653.0228
2653.04012653.04022653.04032653.04042653.04052653.04062653.04072653.04082653.04092653.04102653.04192653.0420
MPSInscription0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Ä
Ö
Ü
)
/
.
:
=
~
,
(
+
-
MPS MPS H
More accessories starting on page 264.
*1 Numbers and symbols 30 pcs. each: 0-9; blank;symbols
*2 Characters A through Z30 pcs. per: A-Z; Ä; Ö; Ü;blank
Wire and cable markers – Stainless steel marking system MPS CONTA-CONNECT
Stainless steel markers MPSThe MPS marking system provides a high-quality methodfor marking cables, wires, pipes and components that isquick, safe and simple.Customer-specific multi-character marking, single-rowembossing with up to 30 characters, or double-rowembossing with up to 43 characters per row.• Very good resistance in saline and damp environments• Good corrosion resistance against acids• First-class quality controlled
The MPS H is a holder with raised profiles at both endsfor fixing steel cable ties.It is available in five different lengths.The markers are simply stretched over the holder
The CTS stainless steel cable ties can be used outdoorsunder extremely harsh conditions.Easy processing is possible with a pliers or the MPS Tool M.Material: Acid-resistant stainless steel
TypeType/colourCat. no.Type/colourCat. no.
CharacteristicsLength x width, mmLength MPS H 47|65|87|109|128 x width (mm)Length CTS 4,6/127|150|200|360 x width (mm)
MaterialMaterial
Temperature rangeResistance
InscriptionSystemNo. of rows MPS 1 | MPS 2Max. no. of characters per row MPS 1| MPS 2
ApplicationMax. number of cable ties per holderMax cable tie width, mmMax. no of MPS markers per MPS H 47 holder |65|87|109|128Bundle Ø CTS 4.6/127|150|200|360 (mm)Minimum tensile strength, N/mm2
AccessoriesCable tie CTSCat. no. Cable tie CTSCat. no. Cable tie CTSCat. no. Cable tie CTSCat. no. Cable tie toolCat. no.
Additional accessories
Qty.
1
1
Page
393
393
393
393
425
Qty.
100
100
100
100
1
Qty.
1
1
Qty.
100
100
100
100
1
Qty.
50
50
Qty.
100
100
100
100
1
392
MPS customer-specific embossing
MPS 1x1-8 So2658.008MPS 2x1-11 So2658.011
47 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemicals and fire
Embossing1 | 28 | 11
24.6
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
MPS 1x9-13 So2658.013MPS 2x12-18 So2658.018
65 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemicals and fire
Embossing1 | 2
13 | 18
24.6
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
MPS 1x14-19 So2658.019MPS 2x19-27 So2658.027
87 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemicals and fire
Embossing1 | 2
19 | 27
24.6
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826
More accessories starting on page 264.
Page
393
393
393
393
425
Page
393
393
393
393
425
MPS H
MPS H 473430.0MPS H 653431.0MPS H 873432.0MPS H 1093433.0MPS H 1283434.0
47|65|87|109|128 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemical and fire.
24,6
6|9|13|17|20
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
Qty.
1
1
Qty.
100
100
100
100
1
CTS
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0
127|150|200|360 x 4,6
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemical and fire.
25|44|50|10245
393
Qty.
1
1
Qty.
50
50
50
50
50
Qty.
50
50
50
50
MPS
MPS 1x20-25 So2658.025MPS 2x28-35 So2658.035
109 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemical and fire.
Embossing1|2
25|35
24,6
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
Customer-specific embossing
MPS 1x26-30 So2658.030MPS 2x36-43 So2658.043
128 x 10.3
Acid-resistant stainless steel, in compliance with
SIS 2347 | SIS 2348, corresponding to
AISI 316TI | 316 L and DIN 17440
-80°C to +500°C
Excellent resistance againstheat, cold, corrosion, acids,
chemical and fire.
Embossing1|2
30|43
24,6
CTS 4,6/1273436.0CTS 4,6/1503437.0CTS 4,6/2003438.0CTS 4,6/3603439.0MPS Tool M3826.0
Qty.
100
100
100
100
1
Qty.
100
100
100
100
1
Qty.
MA
RK
ING
SYS
TEM
S
Page
393
393
393
393
425
Page
393
393
393
393
425
Page
393
393
393
393
425
Cable and wire markers – Adhesive cable labels KKECONTA-CONNECT
Adhesive cable labels KKEThe KKE cable markers allow you to mark cables and wirewith an outer diameter of up to 32 mm in a safe, easy andquick manner.• Quick and professional marking with the TTP thermal-
transfer printer or EMS plotter.• The BS-1 marker pen provides uncomplicated and quick
marking of blank labels
Format: DIN A4 or rollMaterial: Polyester
Type
Type, roll
Type, sheet
Colours available
Characteristics
DimensionsDiameter of roll coreSheet
MaterialMaterialTemperature rangeMin. temperature when attachingResistanceMin. shelf-life under normal conditions(21°C and 50% rel. humidity)
InscriptionPlotter for KKE..A4Plotter inlayPrinter for KKE.. RollMarker pen
KKE…
KKE…A4
75 mmDIN A4
Polyester-40°C to +150°C
+10°CWater, alcohol, benzene, oils
2 years
EMSCCI-8TTPBS-1
Qty.
1
10
Cat. no.3950.73950.83955.73955.83954.73954.83951.73951.83952.73952.83953.73953.8
Roll of...pcs.
3000
3000
4500
4500
2400
2400
1800
1800
1500
1500
1050
1050
Size oflabel field
L x W (mm)16 x 13
16 x 13
25 x 14
25 x 14
21 x 16
21 x 16
23 x 19
23 x 19
34 x 25
34 x 25
24 x 25
24 x 25
Outer diameter
(mm)4,5 - 6
4,5 - 6
4,5 - 6
4,5 - 6
6,5 - 11
6,5 - 11
6,5 - 16
6,5 - 16
8,5 - 21
8,5 - 21
12,5 - 32
12,5 - 32
TypeKKB 34/18 WH
KKE 34/18 YE
KKE 35/25 WH
KKE 35/25 YE
KKE 55/23 WH
KKE 55/23 YE
KKE 76/25 WH
KKE 76/25 YE
KKE 93/36 WH
KKE 93/36 YE
KKE 140/25 WH
KKE 140/25 YE
KKE roll
394
.8.7
Adhesive cable labels KKE
Type
Type, roll
Type, sheet
Colours available
Characteristics
DimensionsDiameter of roll coreSheet
MaterialMaterialTemperature rangeMin. temperature when attachingResistanceMin. shelf-life under normal conditions(21°C and 50% rel. humidity)
InscriptionPlotter for KKE..A4Plotter inlayPrinter for KKE.. RollMarker pen
Additional accessories
KKE…
KKE…A4
75 mmDIN A4
Polyester-40°C to +150°C
+10°CWater, alcohol, benzene, oils
2 years
EMSCCI-8TTPBS-1
Qty.
1
10
KKE DIN A4 sheet
Cat. no.3956.73956.83957.73957.83958.73958.83959.73959.83960.73960.83961.73961.8
DIN A4sheet at...pieces
55
55
88
88
40
40
28
28
15
15
16
16
Label fieldsize
L x W (mm)8 x 37
8 x 37
13 x 17.8
13 x 17.8
13 x 22.8
13 x 22.8
17 x 25.4
17 x 25.4
25 x 35.5
25 x 35.5
25.4 x 25.4
25.4 x 25.4
Outerdiameter
(mm)3 - 53 - 55 - 75 - 77 - 127 - 128 - 148 - 14
10 - 2210 - 2216 -3616 -36
TypeKKE 25/37 A4 WH
KKE 25/37 A4 YE
KKE 34/17,8 A4 WH
KKE 34/17,8 A4 YE
KKE 55/22,8 A4 WH
KKE 55/22,8 A4 YE
KKE 68/25,4 A4 WH
KKE 68/25,4 A4 YE
KKE 93/35.5 A4 WH
KKE 93/35.5 A4 YE
KKE 139,7/25,4 A4 WH
KKE 139,7/25,4 A4 YE
395More accessories starting on page 264.
MA
RK
ING
SYS
TEM
S
.8.7
Device and installation markers – Maxicard MC GSMaxicard MC GSThe GS Maxicard allows you to mark on the contactors, auto-matic switchgear, relays and circuit-breakers from leadingmanufacturers in a safe, quick and simple manner.
The markers are available for devices manufactured by the fol-lowing companies: ABB, Siemens, Telemecanique, Moeller, GE,AEG, ifm-electronic, and Finder.
The self-adhesive types (MC GS.. K) can be used anywhere inthe field or in the switchgear cabinet.
They are available blank or with custom printing. The blankPocket-Maxicards can easily be printed on using the EMS-2plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per row
Number of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationDevice manufacturer
Additional variant information, device manufacturer
MC GS 7/20
MC GS 7/20 R WH3329.7MC GS 7/20 R So WH3335.7
20 x 75
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-114|45|5
Siemens/ifm-electronic
SiemensASI slaves slimline S22.5/S45ASI slaves counter moduleASI slaves earth faultdetection moduleprotection, auxiliary protection, protective combinationAuxiliary switch blockauxiliary switch blocks 3RH1921ENV interference suppressionmodulesemiconductor relay, semiconductor protectionfunctional modulepower switch, electrical overload relaythermal overload relaysoft starter, direct startermotor management and control devicestiming relay, monitoring relaysafety relay
ifm-electronicActive AS-i module AC225..
MC GS 7/20
MC GS 7/20 K WH3381.7MC GS 7/20 K So WH9806.7
20 x 75
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-114|45|5
Universal self-adhesive (K)
MC GS 8/17
MC GS 8/17 R t WH3321.7MC GS 8/17 R t So WH 3331.7
17 x 85
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-114|57|5
Telemecanique /ifm-electronic
SiemensStandard protection:GC 1610, 1611, 1620, 2502GC 1622, 1630, 1640, 2504GC 2510, 2511, 2520GC 2522, 2530, 2540GC 4002, 4004, 4011, 4020, 4022GC 4030, 4040GC 6302, 6304, 6311, 6320, 6322GC 3630, 6340GC 10020, 10040Series protection:GY 1611, 1620, 1640GY 2511, 2520, 2530, 2540GY 4020. 4030, 4040Motor outlet combination TeSys LD1Motor feeder combination HL-protection LD4Motor feeder combination / Rotationcombination LD 5
ifm-electronicActive AS-i Module AC225..
CONTA-CONNECT
Snap-onSpecial print
Snap-on
self-adhesiveSpecial printself-adhesive
Qty.
200
200
Qty.
200
200
Qty.
200
200
.8.7.0 .8.7 .7
396
MC GS 8/17
MC GS 8/17 R WH3320.7MC GS 8/17 R So WH3330.7
17 x 85
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-114|57|5
GE (AEG), SYS Pro M, ABB-Stotz /Lumberg
ABBMachinery S 221, S 223, S 281, S 284Protective switch F271, F172Switch, button, signal lamp:E 221, E 222, E 223, E 225, E 226, E 227Power dimmer STD...Power supply NTLSPower meter RS 232...Installation protection ESB..., EN...,Circuit breaker LE1, LE3, LP1-3,LPUC 1/2, LP1NA, LP3NAProtective switch:F..., FIP..., FIK..., FI-LP..., FIS...,FI transmitter FISGLoad switch IS...Overvoltage arrester SA 4...Logic modulesLogic and expansion module:LM..., DO...,DX...,
LumbergInterbus remote bus terminalProfibus-DP...CANopen node CSL...DeviceNet node DSL...AS interface moduleEthernet switch EEC...Actuator-sensor distributor ASB
MC GS 8/19
MC GS 8/19 R WH3322.7MC GS 8/19 R So WH3332.7
19 x 85
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-114|46|5
AEG
GSU-H 60 x 30
MC GS 9/20
MC GS 9/20 R WH3324.7MC GS 9/20 R So WH3334.7
20 x 95
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-115|57|5
Siemens, Moeller
MoellerProtection DILER, DILEM
SiemensASI slaves I/O module
K45.../K60...
Mounting plate K45/K60
MC GS 9/17
MC GS 9/17 K WH3323.7MC GS 9/17 K So WH3333.7
17 x 95
40
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-111|56|5
Universal self-adhesive (K)
MC GS 6x12
MC GS 6x12 R WH3884.7MC GS 6x12 R So WH3885.7MC GS 6x12 K WH3886.7MC GS 6x12 K So WH3887.7
6 x 1210
120
PA6.6, halogen-free-40°C to +105°C
V2
EMS-2CCI-10
BS-14|59|3
CONTA-CLIP / Finder (only ..R type)
CONTA-CLIPPCRCU 2...ZPRC 2...
Finder38, 48, 49, 58, 59, 94, 95 series
WoertzTerminal blocks
Qty.
200
200
Qty.
200
200
Qty.
600
600
600
600
Qty.
200
200
Qty.
200
200
.7 .7 .7 .8.7 .7
397
MA
RK
ING
SYS
TEM
S
Device and installation markers – Maxicard MC GSTMaxicard MC GST and holder GST-HThe GST Maxicard provides a clear, quick and simplesolution for marking command and alert devices.
The markers are snapped onto the holders or attachedusing double sided tape.
The markers fit on the GST-H holder. The holder is avail-able in four sizes and has a 22-mm diameter.
They are available blank or with custom printing.The blank Pocket-Maxicards can easily be printed onusing the EMS plotter system.
Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per row
Number of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationAttach to MC GSt...R | MC GST...KAppropriate marker holders
AccessoriesHolder GST-HCat. no.
MC GST 22/22
MC GST 22/22 K WH3344.7MC GSU 22/22 K So WH3353.7
22 x 22216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-117|517|5
Universal self-adhesive (K)
MC GST 27/12.5
MC GST 27/12,5 R WH3336.7MC GST 27/12,5 R So WH 3345.7MC GST 27/12,5 K WH3341.7MC GST 27/12,5 K So WH 3350.7
12.5 x 27216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-120|59|5
Snap-on (R) | All-purpose self-adhesive (K)
GST-H 27x12,5 BK9803.4
MC GST 27/18
MC GST 27/18 R WH3337.7MC GST 27/18 R So WH 3346.7MC GST 27/18 K WH3342.7MC GST 27/18 K So WH 3351.7
18 x 27216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-120|513|5
Snap-on (R) | All-purpose self-adhesive (K)
GST-H 27x18 BK9804.4
CONTA-CONNECT
Snap-onSpecial print
Snap-on
self-adhesiveSpecial printself-adhesive
Qty.
80
80
80
80
Qty.
80
80
80
80
Qty.
80
80
.7 .7 .7.0 .0 .0
Manufacturer
ABB
Siemens
TypeMA6 -1060
3SB3922-0AY
Manufacturer
ABB
Moeller
Siemens
TypeBSH-B
M22-ST-X
3SB3925-0AV
398
Qty. Qty.
40
Qty.
40
Polyamide 6.6, halogen-freeIn accordance with UL 94-V2 -40 to +105°C
Technical data for the Maxicard and GST-H holder
MaterialFlammability classTemperature range
Holder GST-H, for MC GST Application MC GST...K
MC GST 27/27
MC GST 27/27 R WH3338.7MC GST 27/27 R So WH 3347.7MC GST 27/27 K WH3343.7MC GST 27/27 K So WH 3352.7
27 x 27212
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-120|520|5
Snap-on (R) | All-purpose self-adhesive (K)
GST-H 27x27 BK9805.4
MC GST 27/8
MC GST 27/8 R WH3340.7MC GST 27/8 R So WH 3348.7MC GST 27/8 K WH3339.7MC GST 27/8 K So WH 3349.7
8 x 27216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-120|46|5
Snap-on (R) | All-purpose self-adhesive (K)
GST-H 27x8 BK9802.4
Qty.
80
80
80
80
Qty.
80
80
80
80
.7 .7.0.0
Manufacturer
Grafoplast
Siemens
Siemens
TypeSIT 0B08
3SB1906-2AA
3SB1906-2AW
Manufacturer
ABB
Grafoplast
Murrplastik
Murrplastik
TypeBSH-A
SIT 0B09
BT 22,5
BT Harmony ZB4
399
Qty.
40
Qty.
40
MA
RK
ING
SYS
TEM
S
Polyamide 6.6, halogen-free |Hard PVC (STR)
In accordance with UL 94-V2 | B1 (STR)
-40 to +105°C | -30 to +60°C (STR)
Technical data for the Maxicard and GSU-H holder | Protective strips STRMaterial
Flammability classTemperature range
Holder GSU-H , for MC GSU Application Protective strips STR
Device and installation markers – Maxicard MC GSUMaxicard MC GSU and holderThe GSU Maxicard provides a clear, quick and simplesolution for marking devices, components and switchgearcabinets.
The marker is snapped in to the GSU-H holder. It is pro-tected from environmental conditions by the STR MCGSU protective strips.
It is available in seven sizes, as either snap-on (R) or stick-on (K) variants.
They are available blank or with custom printing.The blank Pocket-Maxicards can easily be printed on usingthe EMS plotter system.
Material: Polyamide 6.6 UL 94-V2, halogen-free
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per row
Number of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotterPlotter inlayMarker penNumber of characters | lines when using font size 14 and plotter pen 0.25: horizontal
Number of characters | lines when using font size 14 and plotter pen 0.25: vertical
ApplicationAttach to MC GSU...R |Attach to MC GSU...K
AccessoriesHolder GSU-HCat. no.Protective strips STRCat. no.Cable ties KBCat. no.
Additional accessories
MC GSU 17x15
MC GSU 17 x 15 R WH3382.7MC GSU 17 x 15 R So WH 3383.7MC GSU 17 x 15 K WH3384.7MC GSU 17 x 15 K So WH 3385.7
17 x 15216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-112|510|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 17x15 BK3827.4STR MC GSU 17x15 R3860.0KB 140 BK2672.0
MC GSU 17x15
MC GSU 27 x 15 R WH3386.7MC GSU 27 x 15 R So WH 3388.7MC GSU 27 x 15 K WH3387.7MC GSU 27 x 15 K So WH 3389.7
27 x 15216
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-120|510|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 17x15 BK3828.4STR MC GSU 27x15 R3861.0KB 140 BK2672.0
CONTA-CONNECT
Snap-onSpecial print
Snap-on
self-adhesiveSpecial printself-adhesive
Qty.
80
80
80
80
Qty.
80
80
80
80
.8.7 .8.7
Qty.
80
80
1000
Page
400
400
390
Qty.
80
80
1000
Page
400
400
390
Qty.
40
40
.8.7
Page
MC GSU 45x15
MC GSU 45 x 15 K WH3398.7MC GSU 45 x 15 K So WH 3399.7
45 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-134|510|5
- | Universal self-adhesive (K)
400
Qty.
More accessories starting on page 264.
Application MC GSU...K
MC GSU 49x15
MC GSU 49 x 15 R WH3390.7MC GSU 49 x 15 R So WH 3392.7MC GSU 49 x 15 K WH3391.7MC GSU 49 x 15 K So WH 3393.7
49 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-138|510|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 49x15 BK3829.4STR MC GSU 49x15 R3862.0KB 140 BK2672.0
MC GSU 60x15
MC GSU 60 x 15 R WH3394.7MC GSU 60 x 15 R So WH 3396.7MC GSU 60 x 15 K WH3395.7MC GSU 60 x 15 K So WH 3397.7
60 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-145|510|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 60x15 BK3830.4STR MC GSU 60x15 R3863.0KB 140 BK2672.0
MC GSU 60x30
MC GSU 60 x 30 R WH3852.7MC GSU 60 x 30 R So WH 3854.7MC GSU 60 x 30 K WH3853.7MC GSU 60 x 30 K So WH 3855.7
60 x 3016
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-145|520|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 60x30 BK3850.4STR MC GSU 60x30 R3864.0KB 140 BK2672.0
MC GSU 85.4x54
MC GSU 85,4 x 54 R WH3856.7MC GSU 85,4x54 R So WH3858.7MC GSU 85,4 x 54 K WH3857.7MC GSU 85,4x54 K So WH 3859.7
85.4 x 5412
PA6.6, halogen-free-40°C to +105°C
V2
EMSCCI-10
BS-165|542|5
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 85,4x54 BK3851.4STR MC GSU 85,4x54 R3865.0KB 140 BK2672.0
Qty.
10
10
10
10
Qty.
30
30
30
30
Qty.
40
40
40
40
Qty.
40
40
40
40
.8.7 .8.7 .8.7 .8.7
Qty.
40
40
1000
Page
401
401
390
Qty.
40
40
1000
Page
401
401
390
Qty.
30
30
1000
Page
401
401
390
Qty.
10
10
1000
Page
401
401
390
401
MA
RK
ING
SYS
TEM
S
Device and installation markers – Maxicard MC GSUMaxicard MC GSU and holder
Colour: yellow, printed in two languages: VorsichtSpannung – Attention Voltage
The marker is snapped in to the GSU-H holder. It is pro-tected from environmental conditions by the STR MCGSU protective strips.
It is available in seven sizes, as either snap-on (R) or stick-on (K) variants.
Material: polyamide 6.6 UL 94-V2, halogen-free
TypeType/colour Cat. no.Type/colourCat. no.Type/colourCat. no.Type/colourCat. no.
Colours available
Characteristics
DimensionsLength x width, mmNumber of markers per row
Number of markers per card
MaterialMaterialTemperature rangeFlamm. class acc. to UL 94
InscriptionPlotter
ApplicationAttach to MC GSU...R |Attach to MC GSU...K
AccessoriesHolder GSU-H, for MC GSU...RCat. no.Protective strips STRCat. no.Cable ties KBCat. no.
Additional accessories
MC GSU 17x15
MC GSU 17 x 15 R/B YE 3872.8
MC GSU 17 x 15 K/B YE3873.8
17 x 15216
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 17 x 15 BK3827.4STR MC GSU 17 x 15 R3860.0
MC GSU 17x15
MC GSU 27 x 15 R/B YE 3874.8
MC GSU 27 x 15 K/B YE 3875.8
27 x 15216
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 27 x 15 BK3828.4STR MC GSU 27 x 15 R3861.0
CONTA-CONNECT
Snap-on
self-adhesive
Qty.
80
80
Qty.
80
80
Qty.
1000
80
Page
400
400
Page
400
400
Qty.
1000
80
.8 .8
MC GSU 45x15
MC GSU 45 x 15 K/B YE 3888.8
45 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
- | Universal self-adhesive (K)
-
-
Qty.
40
Page Qty.
.8
402
Polyamide 6.6, halogen-free |Hart PVC (STR)
In accordance with UL 94-V2 | B1 (STR)
-40 to +105°C | -30 to +60°C (STR)
Technical data for the Maxicard and GSU-H holder |Protective strips STRMaterial
Flammability classTemperature range
Holder GSU-H , for MC GSU Application Protective strips STR
More accessories starting on page 264.
MC GSU 49x15
3304.7
MC GSU 49 x 15 R/B YE 3876.8
MC GSU 49 x 15 K/B YE 3877.8
49 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 49 x 15 BK3829.4STR MC GSU 49 x 15 R3862.0
Qty.
40
40
Qty.
1000
40
Page
401
401
.8
MC GSU 60x15
MC GSU 60 x 15 R/B YE 3878.8
MC GSU 60 x 15 K/B YE 3879.8
60 x 1518
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 60 x 15 BK3830.4STR MC GSU 60 x 15 R3863.0
MC GSU 60x30
MC GSU 60 x 30 R/B YE 3880.8
MC GSU 60 x 30 K/B YE 3881.8
60 x 30 16
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 60 x 30 BK3850.4STR MC GSU 60 x 30 R3864.0
MC GSU 85,4x54
MC GSU 85.4 x 54 R/B YE 3882.8
MC GSU 85,4 x 54 K/B YE 3883.8
85,4 x 5412
PA6.6, halogen-free-40°C to +105°C
V2
Thermal transfer
Snap-on (R) | All-purpose self-adhesive (K)
GSU-H 85,4 x 54 BK3851.4STR MC GSU 85,4 x 54 R3865.0
Qty.
10
10
Qty.
30
30
Qty.
40
40
Qty.
1000
40
Qty.
1000
30
Qty.
1000
10
.8 .8 .8
403
Application MC GSU...K
MA
RK
ING
SYS
TEM
SPage
401
401
Page
401
401
Page
401
401
Device and facility markers – GKE adhesive device labelsCONTA-CONNECT
Adhesive device labels GKEGKE adhesive device labels bring clarity to the switchgearcabinet. With four different sizes and three colours,the GKE series provides the right marking solution for anyposition in the switchgear cabinet.
Quick and professional marking with the TTP thermal-transfer printer or EMS plotter.
The BS-1 marker pen provides uncomplicated and quickmarking of blank labels
Format: DIN A4 or rollMaterial polyester
TypeType rollCat. no.Type sheetCat. no.
Colours available
Characteristics
DimensionsDiameter of roll coreSheet
MaterialMaterialTemperature rangeMin. temperature when attachingResistanceMin. 2 year storage under normal conditions (21°C and 50 % relative humidity)
InscriptionPlotter for GKE..A4Plotter inlayPrinter for GKE...rollMarker pen
Application
Additional accessories
GKE...
GKE...A4
75 mmDIN A4
Polyester-40°C to +105°C
+15°CWater, alcohol, benzene, oils
2 years
EMSCCI-8TTPBS-1
Qty.
1
10
GKE, roll
Cat. no.3914.83900.83900.03900.73901.83901.03901.73902.83902.03902.73903.83903.03903.73915.03904.83904.03904.73905.83905.03905.73906.03916.03917.73907.83907.03907.73908.83908.03908.73909.83909.03909.788607.03910.83910.03910.73911.83911.03911.73912.03913.0
TypeGKE 10/7 YE
GKE 15/6 YE
GKE 15/6 SI
GKE 15/6 WH
GKE 18/6 YE
GKE 18/6 SI
GKE 18/6 WH
GKE 18/9 YE
GKE 18/9 SI
GKE 18/9 WH
GKE 20/8 YE
GKE 20/8 SI
GKE 20/8 WH
GKE 21.5/21.5 SI
GKE 25/12 YE
GKE 25/12 SI
GKE 25/12 WH
GKE 26/10 YE
GKE 26/10 SI
GKE 26/10 WH
GKE 26,5/17,5 SI
GKE 27/27 SI
GKE 30/6 WH
GKE 30/20 YE
GKE 30/20 SI
GKE 30/20 WH
GKE 32/9 YE
GKE 32/9 SI
GKE 32/9 WH
GKE 38/19 YE
GKE 38/19 SI
GKE 38/19 WH
GKE 45/10 WH
GKE 45/23 YE
GKE 45/23 SI
GKE 45/23 WH
GKE 65/35 YE
GKE 65/35 SI
GKE 65/35 WH
GKE 101/48 SI
GKE 101/74 SI
Tag sizeLxW (mm)
10x70
15x6
15x6
15x6
18x6
18x6
18x6
18x9
18x9
18x9
20x8
20x8
20x8
21.5x21.5
25x12
25x12
25x12
26x10
26x10
26x10
26.5x17.5
27x27
30x6
30x20
30x20
30x20
32x9
32x9
32x9
38x19
38x19
38x19
45x10
45x23
45x23
45x23
65x35
65x35
65x35
101x48
101x74
Roll at... pieces
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
10000
6000
10000
10000
10000
10000
10000
10000
10000
9000
10000
6000
6000
6000
10000
10000
10000
2000
2000
2000
10000
2000
2000
2000
1000
1000
1000
500
500
404More accessories starting on page 264.
.8.7
GKE DIN A4 sheet
Cat. no.3920.83920.73921.83921.788517.088517.73992.83922.73923.83923.73924.83924.73925.83925.73926.83926.73927.83927.73928.83928.73929.83929.7
TypeGKE 15/4,6 A4 YE
GKE 15/ 4,6 A4 WH
GKE15/6 A4 YE
GKE 15/ 6 A4 WH
GKE 17/9 A4 YE
GKE 17/ 9 A4 WH
GKE 20/8 A4 YE
GKE 20/ 8 A4 WH
GKE 25,4/12,7 A4 YE
GKE 25,4/ 12,7 A4 WH
GKE 26/10 A4 YE
GKE 26/ 10 A4 WH
GKE 30/20 A4 YE
GKE 30/20 A4 WH
GKE 56/22 A4 YE
GKE 56/ 22 A4 WH
GKE 60/36 A4 YE
GKE 60/ 36 A4 WH
GKE 105/148 A4 YE
GKE 105/148 A4 WH
GKE 210/148 A4 YE
GKE 210/ 148 A4 WH
Tag sizeLxW (mm)
15x4.6
15x4.6
15x6
15x6
17x9
17x9
20x8
20x8
25.4x12.7
25.4x12.7
26x10
26x10
30x20
30x20
56x22
56x22
60x36
60x36
105x148
105x148
210x148
210x148
DIN A4 sheetwith ... pcs
627627484484290290264264147147156156787836362121
4422
405
MA
RK
ING
SYS
TEM
S
Device and facility markers – Plastic engraving cards GMP CONTA-CONNECT
Plastic engraving material GMPMarkers for engraving and identification on switchgear cabi-nets, machines and facilities.
This high-quality marking option is a good solution for anyapplication.
GMP markers can be engraved on with the EMS EngravingUnit or they can be used with plotter pens.Precise alignment of the 300 x 200 mm cards on the plotterbase plate by means of the adhesive inlay CCI-8.Pre-milled markers in various sizes or 300 x 200-mm blankcards are available.Markers come with a silver base colour and black fill colour oralternatively a white base colour and black fill colour.
Material: Acrylate polymer
TypeTypeCat. no.
Colours available
Characteristics
DimensionsCard size, mmR = corners with marker radius
MaterialMaterialTemperature rangeResistance
InscriptionPrinting processPlotter inlayFill colour
ApplicationAttachment
Additional accessories
GMP...
Base colour Fill colour
300 x 200
Acrylate polymer-20°C to +80°C
Acids, chemicals and UVradiation
EMS or EMS Engraving Unit
CCI-8BK
self-adhesive
Qty.
2
GMP
Cat. no.1660.01661.01662.01663.01664.01665.01666.01667.01668.01669.01670.01671.01672.01673.01674.01675.01676.01677.01679.01690.01691.01692.01693.01786.01787.01788.01789.01791.0
Type
GMP 17/9 R WH|BK
GMP 17/9 R SI|BK
GMP 18/9 R WH|BK
GMP 19/9 R SI|BK
GMP 22/22 R WH|BK
GMP 22/22 R SI|BK
GMP 25/60 R WH|BK
GMP 19/45 R SI|BK
GMP 27/12,5 R WH|BK
GMP 27/12,5 R SI|BK
GMP 27/18 R WH|BK
GMP 27/18 R SI|BK
GMP 27/27 R WH|BK
GMP 27/27 R SI|BK
GMP 30/15 SI|BK
GMP 70/35 R SI|BK
GMP 200/300 WH|BK
GMP 200/300 SI|BK
GMP 45/14 R SI|BK
GMP 27/18 R RD|WH
GMP 50/20 R RD|WH
GMP 70/35 R RD|WH
GMP 95/45 R RD|WH
GMP 25/60 R SI|BK
GMP 40/15 WH|BK
GMP 60/20 WH|BK
GMP 70/35 WH|BK
GMP 8/18 WH|BK
Tag sizeLxW (mm)
17x9
17x9
18x9
18x9
22x22
22x22
25x60
19x45
27x12.5
27x12.5
27x18
27x18
27x27
27x27
30x15
70x35
200x300
200x300
49x15
27x18
50x20
70x35
95x45
25x60
40x15
60x20
70x35
8x18
Cardat... pieces
255
255
238
238
84
84
30
56
120
120
90
90
60
60
108
20
1
1
72
90
45
20
12
30
84
42
20
374
406More accessories starting on page 264.
Device and facility markers – Aluminium engraving cards GMA Aluminium engraving material GMAMarkers for engraving and identification on switchgear cabi-nets, machines and facilities.
This high-quality marking option is a good solution for anyapplication.
GMA markers can be engraved with the EMS EngravingUnit.Precise alignment of the 300 x 200 mm cards on the plotterbase plate by means of the adhesive inlay CCI-8.
Available in three different sizes.Two holes per tag for mounting with screws or rivets.
Material: anodized aluminium
TypeTypeCat. no.
Colours available
Characteristics
DimensionsCard size, mmAttachment holes, mm
MaterialMaterialTemperature rangeResistance
InscriptionPrinting processPlotter inlayFill colour
ApplicationAttachmentScrew
Qty.
2GMA..
anodized silver
300 x 2002.2
Anodized aluminium-40°C to +800°C
Heat, cold, corrosion, acids,
chemicals, fireproof
EMS + EMS Engraving Unit
CCI-8silver
2 x screw or rivetM2
Cat. no.1680.01681.01682.0
TypeGMA 30/15 R 2x2,2 SI/anodized SI
GMA 55/20 R 2x2,5 SI/anodized SI
GMA 40/15 R 2x2,5 SI/anodized SI
Tag sizeLxW (mm)
30x15
55x20
40x15
Cardat... pieces
130
50
91
The printers and plotters are described on page 408.
GMA
407
MA
RK
ING
SYS
TEM
S
Printing systems and software – Plotter systems EMSCONTA-CONNECT
408
Qty.1
1
Qty.1
1
CONTA-CONNECT
408
Qty.1
EMS-2
EMS-2 Starter Kit DIN A31 x EMS-2 Easy Marking System DIN A3 (1610.0)1 x plotter inlay CCI-10 (1606.0)1x disposable plotter pen PPE 0.35 (1651.0)Plotter (DIN A3), power pack, connecting cable (parallel cable and USB cable for con-necting the plotter to a PC), software: CONTA-Sign CS in ten languages (German, Eng-lish, French, Spanish, Hungarian, Italian, Dutch, Polish, Russian, Swedish). Runs on Win-dows: 2000, XP, Vista, 7
1612.0
Flat bed plotterTwo-phase step motorPrinting markers of various materials and sizes10.5 mm, custom solutions up to 15 mmDIN A3, 440 x 305Based on HP-GL40 cm /sec.80 mm /sec.660 x 125 x 440Approx. 8 kg100-240 V AC 50-60 HzCentronix / USB Level 1.1Max. 4 plotter pensMax. 4 pieces10°C...35°C
EMS-2 Starter Kit DIN A41 x EMS-2 Easy Marking System DIN A4 (1631.0)1 x plotter inlay CCI-10 (1606.0)1x disposable plotter pen PPE 0.35 (1651.0)Plotter (DIN A3), power pack, connecting cable (parallel cable and USB cable for con-necting the plotter to a PC), software: CONTA-Sign CS in ten languages (German, Eng-lish, French, Spanish, Hungarian, Italian, Dutch, Polish, Russian, Swedish). Runs on Win-dows: 2000, XP, Vista, 7
9800.0
Flat bed plotterTwo-phase step motorPrinting markers of various materials and sizes10.5 mm, custom solutions up to 15 mmDIN A4, 220 x 305Based on HP-GL40 cm /sec.80 mm /sec.450 x 125 x 440Approx. 6 kg100-240 V AC 50-60 HzCentronix / USB Level 1.1Max. 4 plotter pensMax. 2 pieces10°C...35°C
Plotter system EMS-2A system that fulfils a wide variety of marking and labelling requirements!The EMS Easy Marking System series features excellent versatility andease of use.• Generous loading capacity: up to 800 markers for the EMS-2 DIN A3
with 4 inlays; up to 400 markers for the EMS-2 DIN A4 with 2 inlays.• Short loading times for various materials, thanks to fast and straight-
forward exchange of inlays and automatic inlay recognition• The accompanying labelling software, CONTA-Sign, is available in
ten languages (German, English, French, Spanish, Hungarian, Italian,Dutch, Polish, Russian, Swedish)
• Free software updates can be downloaded from our web page• High-quality labelling is ensured by the combination of our PP and
PPE pens and the double-sided plotter arm design.• Just one inlay for all CONTA-CLIP Maxicards• Automatic calibration eliminates the need for manual adjustments
TypeType
Cat. no.
Technical data for DIN A3 plotterPrinter typeDriveIntended useMax. marker heightMax. plotting areaCommand languageMax. plotting speedMax. printing speedDimensions (WxHxD)WeightSupply voltageInterfacesPen stationInlaysAmbient temperature
TypeType
Cat. no.
Technical data for DIN A4 plotterPrinter typeDriveIntended useMax. marker heightMax. plotting areaCommand languageMax. plotting speedMax. printing speedDimensions (WxHxD)WeightSupply voltageInterfacesPen stationInlaysAmbient temperature
Qty.1
408
Qty.1
1
Qty.1
EMS-eco Marking-System Plotter A system that fulfils a wide variety of marking and labelling requirements!The entry-level model in our EMS Easy Marking System series stands outfor the impressive versatility and user-friendliness fitted into its small size.• Generous loading capacity (up to 400 markers with 2 inlays)• Short loading times for various materials, thanks to fast and straightfor-
ward exchange of inlays and automatic inlay recognition• The accompanying labelling software, CONTA-Sign, is available in ten
languages (German, English, French, Spanish, Hungarian, Italian, Dutch,Polish, Russian, Swedish)
• Free software updates can be downloaded from our web page• High-quality labelling is ensured by the combination of our plotter pens
and the double-sided plotter arm design.• Just one inlay for all CONTA-CLIP Maxicards• Automatic calibration eliminates the need for manual adjustments
TypeType
Cat. no.
Technical data Printer typeDriveIntended useMax. marker heightMax. plotting areaCommand languageMax. plotting speedMax. printing speedDimensions (WxHxD)WeightSupply voltageInterfacesPen stationInlaysAmbient temperature
EMS accessories (DIN A3, DIN A4, eco)Cat. no.1630.01595.0
1614.01597.01598.0
1648.01687.01658.01647.0Engraving unit for EMS plotter (DINA3, DIN A4, eco)1621.0
Engraving unit accessories1623.01624.01625.01626.01627.01628.01629.01635.01636.01637.01638.01684.01688.01689.01685.01686.01659.0
Qty.1
111
11111
1
11111111111111111
EMS-eco
EMS-eco Starter Kit DIN A41 x EMS-eco Easy Marking System DIN A4 (1611.0)1 x plotter inlay CCI-10 (1606.0)1 x disposable plotter pen PPE 0.35 (1651.0)Plotter (DINA4), power pack, connecting cable (USB cable for connecting the plotter to aPC), software: CONTA-Sign CS in ten languages (German, English, French, Spanish,Hungarian, Italian, Dutch, Polish, Russian, Swedish), 2000, XP, Vista, 7
1613.0
Flat-bed plotterTwo-phase step motorPrinting markers of various materials and sizes10.5 mm, custom solutions up to 15 mmDIN A4, 220 x 305Based on HP-GL40 cm /sec.80 mm /sec.440 x 125 x 440approx. 6 kg100-240V AC 50-60 HzUSB Level 1.1-Max. 2 pieces10°C...35°C
Short descriptionThe pen is re-activated by means of negative pressure following a refill or a longer period of non-use.Ink cartridge for the PP plotter pen (the etching ink is quick-drying, smudge-proof, non-fading as well asresistant to spirits and benzene when used with suitable plastic materials). The use of cartridges eliminatesthe need to re-fill the ink.Ink Cartridge Paper for PPP (Plotter Pen Paper) for printing on paper
Cleaning container (reusable cleaning container for PP)
Pen cleaner (for cleaning two PP plotter pens). Two new clip-seal caps are included.
For EMS-2 A3
For EMS-2 A4 and EMS eco
Visual calibration aid for the EMS-2 (DIN A3 and DIN A4)
Four exchangeable sealing inserts (for pen station), installation key and ten exchangeable tags
Engraving module for EMS-2 plotter including: spindle, controller, vacuum cleaner and 0.4-mm graver. This addi-tion extends the EMS plotter so it can be used as an affordable engraving tool for aluminium or plastic.
Graver set for plastic, 0.2 mm
Graver set for plastic, 0.3 mm
Graver set for plastic, 0.4 mm
Graver set for plastic, 0.5 mm
Graver set for plastic, 0.7 mm
Graver set for plastic, 1.0 mm
Graver set for plastic (0.2; 0.3; 0.4; 0.5; 0.7; 1.0 mm) incl. packaging
Graver cutter for aluminium, 0.2 mm
Graver cutter for aluminium, 0.4 mm
Graver cutter for aluminium, 0.6 mm
Graver cutter for aluminium, 1.0 mm
Graver cutter for aluminium, 1.4 mm
Graver cutter for aluminium, 2.0 mm
Graver cutter for aluminium, 2.4 mm
500 ml cutting oil for aluminium
100 mm alu-oxide acid for darkening of anodized aluminium markers
1 packet á 5 bags
409
TypePressure ballTP (5x1 ml)
TPP (5x1 ml)CC-1PC-1
Protective dust cover EMS-2 DIN A3Protective dust cover EMS-2 DIN A4Visual calibration toolService Set EMS-2
EMS engraving unit
Graver 0.2Graver 0.3Graver 0.4Graver 0.5Graver 0.7Graver 1.0Graver set for plasticGraver cutter 0.2Graver cutter 0.4Graver cutter 0.6Graver cutter 1.0Graver cutter 1.4Graver cutter 2.0Graver cutter 2.4Survol cutting oil, 500 mlalu-oxide acid, 100 mlEMS-2 engraving unit, vacuum cleaner bag
CONTA-CONNECT
410
InlaysCONTA-CLIP’s EMS plotter systems allow you to conveniently print onpractically any CONTA-CLIP marker. CONTA-CLIP offers a matchinginlay for each marker. Just pick the appropriate inlay for your marker and you’re already onyour way.
The CONTA-Sign marking software can automatically recognize the insert-ed inlay; the software can then suggest the appropriate marker to the user.
In addition to our proprietary inlays, CONTA-CLIP offers inlays for thestandard markers from other manufacturers such as Partex, Phoenix,Wago or Weidmüller.These are available upon request.
TypeTypeCat. no.TypeCat. no.TTypeCat. no.TypeCat. no.
TypeCat. no.TypeCat. no.
TypeCat. no.
TypeCat. no.
TypeCat. no.
TypeCat. no.
TypeCat. no.
TypeCat. no.
DIN A4 inlay
CCI
CCI-3 1593.0CCI-41600.0CCI-51601.0CCI-61602.0
CCI-71603.0CCI-81604.0
CCI-101606.0
CCI-111607.0
CCI-1588520.8
CCI-1788520.0
CCI-1888520.1
CCI-1988520.2
Qty.1
1
1
1
1
1
1
1
1
1
1
1
For holding CONTA-CLIP markers of type 1AD 1/5 N
ADQ
KBH-S4
AD 1/5AD 1/6AD 1/8AD 1/16 NAD 1/2 N
ESO GT 1ESO GT 2ESOBST 8KKE...A4GKE...A4GMP...GMA...MC SBMC BSTRMC MMMC KMSMC ESSMC GSMC GSTMC GSUMC KMC
SchT 9SchT 10ZSchT 6
KBH-S 21 stripKBH-S 36 stripKBH-S 57 stripKBH-S 84 stripKBH-S 3/15 stripKBH-S 3/21 stripKBH-S 3/27 strip
KBH 5/15 stripKBH 5/21 stripKBH 5/27 strip
KBH 10/15KBH 10/21KBH 10/27KBH 10/36
Printing systems and software – Inlays for plotter systems EMS
410
Printing systems and software – Thermal-transfer printer TTP
411
Qty.1
TTP
TTP Starter Kit1xTTP-Printer (1640.0)1 x TTP film (1641.0)Thermal-transfer printer TTP, including power cable, printer driver and software CONTA-Sign CS in ten languages (German, English, French, Spanish, Hungarian, Italian, Dutch,Polish, Russian, Swedish), runs under Windows: 2000, XP, Vista, 7. Connection cable(USB cable), label attacher (75-mm diameter)
1644.0
Thermal transferPrinting of labels110 mm15 mm104 mm750 mm6 mm200 dpi50 - 80 mm/sec230 x 230 x 350ca. 9 kg230 V AC / 50 Hz (optional 115 V AC / 60 Hz)RS232 C / USB 1.1EAN 8, EAN 13, EAN 128, Code 39, Code 39 extended, Code 128, Code 2/5 interleaved75 mm (40 mm optional)180 mm
OverviewRoll of thermal-transfer film, 110 mm x 300 mm (outside with colour) industrial quality1 print head and drum cleaner, 250 ml 1 compressed air for cleaning the photoelectric sensor, 200 ml22 wipes, 5 cleaning spatulas, 2 cleaning cards, 1 cleaning file for print head, 1 label solvent spray, 200 ml
TypeTTP filmTTP cleaning set
Thermal transfer printer TTPThe TTP thermal-transfer printer was designed specifically for marking solu-tions in systems and switchgear cabinet applications and is very versatile.
• Its speed and robustness make the TTP printer ideal for industrialapplications.
• Short loading times for various materials, thanks to fast and straight-forward exchange of label rolls.
• The accompanying labelling software, CONTA-Sign, is available inten languages (German, English, French, Spanish, Hungarian, Italian,Dutch, Polish, Russian, Swedish)
• Free software updates can be downloaded from our web page• The TTP can be used to print on GKE and KKE labels quickly and simply.
TypeType
Cat. no.Technical data Printer typeIntended useMax. label widthMin. label widthPrint widthMax. printing heightMin. label heightResolutionMax. printing speedDimensions (W x H x D)WeightSupply voltageInterfacesBarcodesDiameter of label role coreMax. diameter of rollEMS accessories (DIN A3, DIN A4, eco)TTP accessoriesCat. no.1641.01639.0
411
Printing systems and software – Plotter and printing pensCONTA-CONNECT
Qty.
1
1
1
1
Page
409
409
409
409
Qty.
1
1
1
1
Qty.
1
1
1
1
Qty.
1
1
1
1
*1: with plotter adapter *2: PE INK-ED only smear resistant
PP.. 0.18
Disposable plotter pen, 0.18 mmReusable plotter pen, 0.18 mm
PPE 0.18 mm1649.0PPE Ink-ED 0.18 mm9820.0PP 0.18 mm1586.0
0.18red
black
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof*2, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 0.18
Paper plotter pen /reusable, 0.18 mm
PPP 0.18 mm1615.0
0.18red
black
+5°C to +20°C | +41°F to +68°F
30% to 60%
Papersmudge-proof
yes / yes
TPP (5 x 1ml)1614.0
PP../HP 0.35
Disposable plotter pen, 0.35 mmReusable plotter pen, 0.35 mmReusable hand pen, 0.35 mm
PPE 0.35 mm1651.0PPE Ink-ED 0.35 mm9822.0PP 0.35 mm1588.0HP 0.35 mm 1317.0
0.35yellowblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof*2, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 0.35
Paper plotter pen /reusable, 0.35 mm
PPP 0.35 mm1617.0
0.35yellowblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
Paper
smudge-proof
yes / yes
TPP (5 x 1ml)1614.0
Disposable
Disposable
Reusable
Reusable
Plotter and printing pens
CONTA-CLIP offers a complete line of plotter pans and hand pens forlabelling all types of markers and adhesive labels. The reusable PP pensare available in six different line widths and can be refilled using the TPink cartridge. The disposable PPE pen is an affordable and long-lastingalternative to the PP pen. This pen is available with six line widths. TheHP hand pen can be used to label quickly and easily without a plotter.The TP ink cartridges can be used to refill it. It is available in four differ-ent line widths.
The PPE Ink-ED does not dry out even if it has not been used for along time, but is not suitable for marking outside of the switchgear cabi-net because it is not resistant to smearing. Additional ink colours andline widths for the PPE INK-ED are available on request.
TypeType Cat. no.Type Cat. no.TypeCat. no.TypeCat. no.
Characteristics
GeneralLine width, mmColour codeInk colourStorageStorage temperature °C | °FStorage at rel. humidity level of:ApplicationFor labelling of:CharacteristicsPlotter / Plotter pen holderAccessoriesInk cartridge for PP / HP (TP)Cat. no.Pressure ball for plotter penCat. no.Cleaning containerCat. no.Pen cleanerCat. no.
The PPP paper plotter pen is particularly well suited for labelling paper.It is designed for use with the TPP ink, which is particularly suitable forpaper. The PMP permanent pen is an affordable pen that is primarilyused for test purposes. The BS-1 marker pen is good for easy labelling tasks that are carried outon-site. They can also be used with an adapter on a plotter.
TypeTypeCat. no.TypeCat. no.
Characteristics
GeneralLine width, mmColour codeInk colourStorageStorage temperature °C | °FStorage at rel. humidity level of:ApplicationFor labelling of:CharacteristicsPlotter / Plotter pen holderAccessoriesInk cartridge for PPP (TPP)/plotter adapterCat. no.
PP../HP 0.25
Disposable plotter pen, 0.25 mmReusable plotter pen, 0.25 mmReusable hand pen, 0.25 mm
PPE 0.25 mm1650.0PPE Ink-ED 0.25 mm9821.0PP 0.25 mm1587.0HP 0.25 mm 1316.0
0.25whiteblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof*2, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 0.25
Paper plotter pen /reusable, 0.25 mm
PPP 0.25 mm1616.0
0.25whiteblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
Paper
smudge-proof
yes / yes
TPP (5 x 1ml)1614.0
Qty.
1
Page
409
Page
409
Page
409
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Disposable
Reusable
412
Page
409
409
409
409
Page
409
409
409
409
Qty.
1
1
1
1
Qty.
1
1
1
BS-1
Labelling pen 0.4 mm
BS-12034.0
0.40-
black
+5°C to +20°C | +41°F to +68°F
30% to 60%
Plastic / paperWater-proof and smudge-proof
yes*1 / yes*1
Adapter BS-12000.0
Qty.
1
1
1
1
Qty.
1
1
1
1
Qty.
1
1
1
1
Page
409
409
409
409
Page
409
409
409
409
Page
409
409
409
409
Qty.
1
1
1
1
Qty.
1
1
1
1
Qty.
1
1
1
Qty.
1
1
Qty.
1
PP../HP 0.5
Disposable plotter pen, 0.50 mmReusable plotter pen, 0.50 mmReusable hand pen, 0.50 mm
PPE 0.5 mm1652.0PPE Ink-ED 0.5 mm9823.0PP 0.5 mm1589.0HP 0.5 mm 1318.0
0.50brownblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 0.50
Paper plotter pen / reusable, 0.50 mm
PPP 0.50 mm1618.0
0.50brownblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PaperSmudge-proof
yes / yes
TPP (5 x 1ml)1614.0
PP..1.00
Disposable plotter pen, 1.00 mmReusable plotter pen, 1.00 mm
PPE 1.0 mm1654.0PPE Ink-ED 1.0 mm9825.0PP 1.0 mm1591.0
1.00orangeblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 1.00
Paper plotter pen/ reusable, 1.00 mm
PPP 1.00 mm1620.0
1.00orangeblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PaperSmudge-proof
yes / yes
TPP (5 x 1ml)1614.0
PP../HP 0.70
Disposable plotter pen, 0.70 mmReusable plotter pen, 0.70 mmReusable hand pen, 0.70 mm
PPE 0.7 mm1653.0PPE Ink-ED 0.7 mm9824.0PP 0.7 mm1590.0HP 0.7 mm 1319.0
0.70blueblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PlasticQuick-drying, smudge-proof, non-fading
yes (PPE/PP) / yes (PPE/PP)
TP (5 x 1ml)1595.0Pressure ball1630.0CC-11597.0PC-11598.0PPP 0.70
Paper plotter pen / reusable, 0.70 mm
PPP 0.70 mm1619.0
0.70blueblack
+5°C to +20°C | +41°F to +68°F
30% to 60%
PaperSmudge-proof
yes / yes
TPP (5 x 1ml)1614.0
Page
409
Page
409
Page
409
Page
413
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Qty.
1
Qty.
1
413
Labelling systems and software – Labelling software CONTA-SignCONTA-CONNECT
414
CONTA-CONNECT
414
Labelling software CONTA-SignThe Windows-based CONTA-Sign software was specially devel-oped to produce professional marking solutions for systems andswitchgear cabinet applications. This CONTA-Sign software canbe used to control the EMS-2 plotters (A3, A4 and eco). It canalso be used with printing on heat-transfer roll printers (TTP) orwith Windows-based printers. This software can be used to printon almost all of the markers that CONTA-CLIP delivers.
CONTA-Sign can be used to easily print text, barcodes or graph-ics on the markers.
The CONTA-Sign software is available in ten languages.
System requirementsCPURAMDrivesScreen resolutionOperating systemPeripheralsLanguages
CONTA-Sign
> Pentium II, 200 MHz64 MB RAMCD-ROM640 x 480 Pixels, we recommend at least 1024 x 768 pixelsWindows: 98, ME, NT, 2000, XP, Vista, 7Keyboard and mouseGerman, English, French, Spanish, Hungarian, Italian, Dutch, Polish, Russian, Swedish
FeaturesAn import option is available for importing labelling specifications from project engi-neering software. Uncomplicated, retroactive processing of imported data in the soft-ware. Numerous user-friendly functions simplify manual input. Intuitive operation sup-ports single, multiple and batch markings. Create individual markers using the markerdesign function. The pitch correction function guarantees faultless centering of labellinginformation even with large deviation in the material tolerances. Electronics symbols andspecial characters are included with the software.Open programming means that the markers of different manufacturers are installed inthe software as standard
It is easy to select CONTA-CLIP markers or markers from other manufacturers
414
A variety of different markers in one project
Number and letters are easy to enter Many different electronic symbols are available by default
415415415
Batch entry CAD/CAE, E-plan, plain text, Excel and Access formats can be imported
Projects can be created and saved
One software program for many different output devices
The user’s manual contains a detailed description of the softwarefunctions. The manual can be downloaded for free from our web siteat www.conta-clip.com.
The EMS-2 plotter is easy to operate using the software